linux/arch/x86/kernel/apic/hw_nmi.c

99 lines
2.1 KiB
C
Raw Normal View History

nmi_watchdog: Add new, generic implementation, using perf events This is a new generic nmi_watchdog implementation using the perf events infrastructure as suggested by Ingo. The implementation is simple, just create an in-kernel perf event and register an overflow handler to check for cpu lockups. I created a generic implementation that lives in kernel/ and the hardware specific part that for now lives in arch/x86. This approach has a number of advantages: - It simplifies the x86 PMU implementation in the long run, in that it removes the hardcoded low-level PMU implementation that was the NMI watchdog before. - It allows new NMI watchdog features to be added in a central place. - It allows other architectures to enable the NMI watchdog, as long as they have perf events (that provide NMIs) implemented. - It also allows for more graceful co-existence of existing perf events apps and the NMI watchdog - before these changes the relationship was exclusive. (The NMI watchdog will 'spend' a perf event when enabled. In later iterations we might be able to piggyback from an existing NMI event without having to allocate a hardware event for the NMI watchdog - turning this into a no-hardware-cost feature.) As for compatibility, we'll keep the old NMI watchdog code as well until the new one can 100% replace it on all CPUs, old and new alike. That might take some time as the NMI watchdog has been ported to many CPU models. I have done light testing to make sure the framework works correctly and it does. v2: Set the correct timeout values based on the old nmi watchdog Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: gorcunov@gmail.com Cc: aris@redhat.com Cc: peterz@infradead.org LKML-Reference: <1265424425-31562-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-06 02:47:04 +00:00
/*
* HW NMI watchdog support
*
* started by Don Zickus, Copyright (C) 2010 Red Hat, Inc.
*
* Arch specific calls to support NMI watchdog
*
* Bits copied from original nmi.c file
*
*/
#include <asm/apic.h>
nmi_watchdog: Add new, generic implementation, using perf events This is a new generic nmi_watchdog implementation using the perf events infrastructure as suggested by Ingo. The implementation is simple, just create an in-kernel perf event and register an overflow handler to check for cpu lockups. I created a generic implementation that lives in kernel/ and the hardware specific part that for now lives in arch/x86. This approach has a number of advantages: - It simplifies the x86 PMU implementation in the long run, in that it removes the hardcoded low-level PMU implementation that was the NMI watchdog before. - It allows new NMI watchdog features to be added in a central place. - It allows other architectures to enable the NMI watchdog, as long as they have perf events (that provide NMIs) implemented. - It also allows for more graceful co-existence of existing perf events apps and the NMI watchdog - before these changes the relationship was exclusive. (The NMI watchdog will 'spend' a perf event when enabled. In later iterations we might be able to piggyback from an existing NMI event without having to allocate a hardware event for the NMI watchdog - turning this into a no-hardware-cost feature.) As for compatibility, we'll keep the old NMI watchdog code as well until the new one can 100% replace it on all CPUs, old and new alike. That might take some time as the NMI watchdog has been ported to many CPU models. I have done light testing to make sure the framework works correctly and it does. v2: Set the correct timeout values based on the old nmi watchdog Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: gorcunov@gmail.com Cc: aris@redhat.com Cc: peterz@infradead.org LKML-Reference: <1265424425-31562-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-06 02:47:04 +00:00
#include <linux/cpumask.h>
#include <linux/kdebug.h>
#include <linux/notifier.h>
#include <linux/kprobes.h>
nmi_watchdog: Add new, generic implementation, using perf events This is a new generic nmi_watchdog implementation using the perf events infrastructure as suggested by Ingo. The implementation is simple, just create an in-kernel perf event and register an overflow handler to check for cpu lockups. I created a generic implementation that lives in kernel/ and the hardware specific part that for now lives in arch/x86. This approach has a number of advantages: - It simplifies the x86 PMU implementation in the long run, in that it removes the hardcoded low-level PMU implementation that was the NMI watchdog before. - It allows new NMI watchdog features to be added in a central place. - It allows other architectures to enable the NMI watchdog, as long as they have perf events (that provide NMIs) implemented. - It also allows for more graceful co-existence of existing perf events apps and the NMI watchdog - before these changes the relationship was exclusive. (The NMI watchdog will 'spend' a perf event when enabled. In later iterations we might be able to piggyback from an existing NMI event without having to allocate a hardware event for the NMI watchdog - turning this into a no-hardware-cost feature.) As for compatibility, we'll keep the old NMI watchdog code as well until the new one can 100% replace it on all CPUs, old and new alike. That might take some time as the NMI watchdog has been ported to many CPU models. I have done light testing to make sure the framework works correctly and it does. v2: Set the correct timeout values based on the old nmi watchdog Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: gorcunov@gmail.com Cc: aris@redhat.com Cc: peterz@infradead.org LKML-Reference: <1265424425-31562-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-06 02:47:04 +00:00
#include <linux/nmi.h>
#include <linux/module.h>
#ifdef CONFIG_HARDLOCKUP_DETECTOR
u64 hw_nmi_get_sample_period(void)
{
lockup_detector: Combine nmi_watchdog and softlockup detector The new nmi_watchdog (which uses the perf event subsystem) is very similar in structure to the softlockup detector. Using Ingo's suggestion, I combined the two functionalities into one file: kernel/watchdog.c. Now both the nmi_watchdog (or hardlockup detector) and softlockup detector sit on top of the perf event subsystem, which is run every 60 seconds or so to see if there are any lockups. To detect hardlockups, cpus not responding to interrupts, I implemented an hrtimer that runs 5 times for every perf event overflow event. If that stops counting on a cpu, then the cpu is most likely in trouble. To detect softlockups, tasks not yielding to the scheduler, I used the previous kthread idea that now gets kicked every time the hrtimer fires. If the kthread isn't being scheduled neither is anyone else and the warning is printed to the console. I tested this on x86_64 and both the softlockup and hardlockup paths work. V2: - cleaned up the Kconfig and softlockup combination - surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI - seperated out the softlockup case from perf event subsystem - re-arranged the enabling/disabling nmi watchdog from proc space - added cpumasks for hardlockup failure cases - removed fallback to soft events if no PMU exists for hard events V3: - comment cleanups - drop support for older softlockup code - per_cpu cleanups - completely remove software clock base hardlockup detector - use per_cpu masking on hard/soft lockup detection - #ifdef cleanups - rename config option NMI_WATCHDOG to LOCKUP_DETECTOR - documentation additions V4: - documentation fixes - convert per_cpu to __get_cpu_var - powerpc compile fixes V5: - split apart warn flags for hard and soft lockups TODO: - figure out how to make an arch-agnostic clock2cycles call (if possible) to feed into perf events as a sample period [fweisbec: merged conflict patch] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-07 21:11:44 +00:00
return (u64)(cpu_khz) * 1000 * 60;
}
#endif
/* For reliability, we're prepared to waste bits here. */
static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
#ifdef arch_trigger_all_cpu_backtrace
nmi_watchdog: Add new, generic implementation, using perf events This is a new generic nmi_watchdog implementation using the perf events infrastructure as suggested by Ingo. The implementation is simple, just create an in-kernel perf event and register an overflow handler to check for cpu lockups. I created a generic implementation that lives in kernel/ and the hardware specific part that for now lives in arch/x86. This approach has a number of advantages: - It simplifies the x86 PMU implementation in the long run, in that it removes the hardcoded low-level PMU implementation that was the NMI watchdog before. - It allows new NMI watchdog features to be added in a central place. - It allows other architectures to enable the NMI watchdog, as long as they have perf events (that provide NMIs) implemented. - It also allows for more graceful co-existence of existing perf events apps and the NMI watchdog - before these changes the relationship was exclusive. (The NMI watchdog will 'spend' a perf event when enabled. In later iterations we might be able to piggyback from an existing NMI event without having to allocate a hardware event for the NMI watchdog - turning this into a no-hardware-cost feature.) As for compatibility, we'll keep the old NMI watchdog code as well until the new one can 100% replace it on all CPUs, old and new alike. That might take some time as the NMI watchdog has been ported to many CPU models. I have done light testing to make sure the framework works correctly and it does. v2: Set the correct timeout values based on the old nmi watchdog Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: gorcunov@gmail.com Cc: aris@redhat.com Cc: peterz@infradead.org LKML-Reference: <1265424425-31562-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-06 02:47:04 +00:00
void arch_trigger_all_cpu_backtrace(void)
{
int i;
cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask);
printk(KERN_INFO "sending NMI to all CPUs:\n");
apic->send_IPI_all(NMI_VECTOR);
/* Wait for up to 10 seconds for all CPUs to do the backtrace */
for (i = 0; i < 10 * 1000; i++) {
if (cpumask_empty(to_cpumask(backtrace_mask)))
break;
mdelay(1);
}
}
static int __kprobes
arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self,
unsigned long cmd, void *__args)
{
struct die_args *args = __args;
struct pt_regs *regs;
int cpu = smp_processor_id();
switch (cmd) {
case DIE_NMI:
case DIE_NMI_IPI:
break;
default:
return NOTIFY_DONE;
}
regs = args->regs;
if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
static arch_spinlock_t lock = __ARCH_SPIN_LOCK_UNLOCKED;
arch_spin_lock(&lock);
printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
show_regs(regs);
dump_stack();
arch_spin_unlock(&lock);
cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask));
return NOTIFY_STOP;
}
return NOTIFY_DONE;
}
static __read_mostly struct notifier_block backtrace_notifier = {
.notifier_call = arch_trigger_all_cpu_backtrace_handler,
.next = NULL,
.priority = 1
};
static int __init register_trigger_all_cpu_backtrace(void)
{
register_die_notifier(&backtrace_notifier);
return 0;
}
early_initcall(register_trigger_all_cpu_backtrace);
#endif
nmi_watchdog: Add new, generic implementation, using perf events This is a new generic nmi_watchdog implementation using the perf events infrastructure as suggested by Ingo. The implementation is simple, just create an in-kernel perf event and register an overflow handler to check for cpu lockups. I created a generic implementation that lives in kernel/ and the hardware specific part that for now lives in arch/x86. This approach has a number of advantages: - It simplifies the x86 PMU implementation in the long run, in that it removes the hardcoded low-level PMU implementation that was the NMI watchdog before. - It allows new NMI watchdog features to be added in a central place. - It allows other architectures to enable the NMI watchdog, as long as they have perf events (that provide NMIs) implemented. - It also allows for more graceful co-existence of existing perf events apps and the NMI watchdog - before these changes the relationship was exclusive. (The NMI watchdog will 'spend' a perf event when enabled. In later iterations we might be able to piggyback from an existing NMI event without having to allocate a hardware event for the NMI watchdog - turning this into a no-hardware-cost feature.) As for compatibility, we'll keep the old NMI watchdog code as well until the new one can 100% replace it on all CPUs, old and new alike. That might take some time as the NMI watchdog has been ported to many CPU models. I have done light testing to make sure the framework works correctly and it does. v2: Set the correct timeout values based on the old nmi watchdog Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: gorcunov@gmail.com Cc: aris@redhat.com Cc: peterz@infradead.org LKML-Reference: <1265424425-31562-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-06 02:47:04 +00:00
/* STUB calls to mimic old nmi_watchdog behaviour */
int unknown_nmi_panic;