leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c19b3b05ae
linux/fs/xfs/libxfs/xfs_inode_buf.h

83 lines
3.2 KiB
C
Raw Normal View History

xfs: introduce xfs_inode_buf.c for inode buffer operations The only thing remaining in xfs_inode.[ch] are the operations that read, write or verify physical inodes in their underlying buffers. Move all this code to xfs_inode_buf.[ch] and so we can stop sharing xfs_inode.[ch] with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 10:49:35 +00:00
/*
* Copyright (c) 2000-2003,2005 Silicon Graphics, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __XFS_INODE_BUF_H__
#define __XFS_INODE_BUF_H__
struct xfs_inode;
struct xfs_dinode;
xfs: introduce inode log format object We currently carry around and log an entire inode core in the struct xfs_inode. A lot of the information in the inode core is duplicated in the VFS inode, but we cannot remove this duplication of infomration because the inode core is logged directly in xfs_inode_item_format(). Add a new function xfs_inode_item_format_core() that copies the inode core data into a struct xfs_icdinode that is pulled directly from the log vector buffer. This means we no longer directly copy the inode core, but copy the structures one member at a time. This will be slightly less efficient than copying, but will allow us to remove duplicate and unnecessary items from the struct xfs_inode. To enable us to do this, call the new structure a xfs_log_dinode, so that we know it's different to the physical xfs_dinode and the in-core xfs_icdinode. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-09 05:54:58 +00:00
/*
xfs: cull unnecessary icdinode fields Now that the struct xfs_icdinode is not directly related to the on-disk format, we can cull things in it we really don't need to store: - magic number never changes - padding is not necessary - next_unlinked is never used - inode number is redundant - uuid is redundant - lsn is accessed directly from dinode - inode CRC is only accessed directly from dinode Hence we can remove these from the struct xfs_icdinode and redirect the code that uses them to the xfs_dinode appripriately. This reduces the size of the struct icdinode from 152 bytes to 88 bytes, and removes a fair chunk of unnecessary code, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-09 05:54:58 +00:00
* In memory representation of the XFS inode. This is held in the in-core struct
* xfs_inode and represents the current on disk values but the structure is not
* in on-disk format. That is, this structure is always translated to on-disk
xfs: introduce inode log format object We currently carry around and log an entire inode core in the struct xfs_inode. A lot of the information in the inode core is duplicated in the VFS inode, but we cannot remove this duplication of infomration because the inode core is logged directly in xfs_inode_item_format(). Add a new function xfs_inode_item_format_core() that copies the inode core data into a struct xfs_icdinode that is pulled directly from the log vector buffer. This means we no longer directly copy the inode core, but copy the structures one member at a time. This will be slightly less efficient than copying, but will allow us to remove duplicate and unnecessary items from the struct xfs_inode. To enable us to do this, call the new structure a xfs_log_dinode, so that we know it's different to the physical xfs_dinode and the in-core xfs_icdinode. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-09 05:54:58 +00:00
* format specific structures at the appropriate time.
*/
struct xfs_icdinode {
__int8_t di_version; /* inode version */
__int8_t di_format; /* format of di_c data */
xfs: cull unnecessary icdinode fields Now that the struct xfs_icdinode is not directly related to the on-disk format, we can cull things in it we really don't need to store: - magic number never changes - padding is not necessary - next_unlinked is never used - inode number is redundant - uuid is redundant - lsn is accessed directly from dinode - inode CRC is only accessed directly from dinode Hence we can remove these from the struct xfs_icdinode and redirect the code that uses them to the xfs_dinode appripriately. This reduces the size of the struct icdinode from 152 bytes to 88 bytes, and removes a fair chunk of unnecessary code, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-09 05:54:58 +00:00
__uint16_t di_flushiter; /* incremented on flush */
xfs: introduce inode log format object We currently carry around and log an entire inode core in the struct xfs_inode. A lot of the information in the inode core is duplicated in the VFS inode, but we cannot remove this duplication of infomration because the inode core is logged directly in xfs_inode_item_format(). Add a new function xfs_inode_item_format_core() that copies the inode core data into a struct xfs_icdinode that is pulled directly from the log vector buffer. This means we no longer directly copy the inode core, but copy the structures one member at a time. This will be slightly less efficient than copying, but will allow us to remove duplicate and unnecessary items from the struct xfs_inode. To enable us to do this, call the new structure a xfs_log_dinode, so that we know it's different to the physical xfs_dinode and the in-core xfs_icdinode. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-09 05:54:58 +00:00
__uint32_t di_uid; /* owner's user id */
__uint32_t di_gid; /* owner's group id */
__uint16_t di_projid_lo; /* lower part of owner's project id */
__uint16_t di_projid_hi; /* higher part of owner's project id */
xfs_fsize_t di_size; /* number of bytes in file */
xfs_rfsblock_t di_nblocks; /* # of direct & btree blocks used */
xfs_extlen_t di_extsize; /* basic/minimum extent size for file */
xfs_extnum_t di_nextents; /* number of extents in data fork */
xfs_aextnum_t di_anextents; /* number of extents in attribute fork*/
__uint8_t di_forkoff; /* attr fork offs, <<3 for 64b align */
__int8_t di_aformat; /* format of attr fork's data */
__uint32_t di_dmevmask; /* DMIG event mask */
__uint16_t di_dmstate; /* DMIG state info */
__uint16_t di_flags; /* random flags, XFS_DIFLAG_... */
__uint64_t di_flags2; /* more random flags */
xfs_ictimestamp_t di_crtime; /* time created */
};
xfs: introduce xfs_inode_buf.c for inode buffer operations The only thing remaining in xfs_inode.[ch] are the operations that read, write or verify physical inodes in their underlying buffers. Move all this code to xfs_inode_buf.[ch] and so we can stop sharing xfs_inode.[ch] with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 10:49:35 +00:00
/*
* Inode location information. Stored in the inode and passed to
* xfs_imap_to_bp() to get a buffer and dinode for a given inode.
*/
struct xfs_imap {
xfs_daddr_t im_blkno; /* starting BB of inode chunk */
ushort im_len; /* length in BBs of inode chunk */
ushort im_boffset; /* inode offset in block in bytes */
};
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:45 +00:00
int xfs_imap_to_bp(struct xfs_mount *, struct xfs_trans *,
struct xfs_imap *, struct xfs_dinode **,
struct xfs_buf **, uint, uint);
int xfs_iread(struct xfs_mount *, struct xfs_trans *,
struct xfs_inode *, uint);
void xfs_dinode_calc_crc(struct xfs_mount *, struct xfs_dinode *);
xfs: cull unnecessary icdinode fields Now that the struct xfs_icdinode is not directly related to the on-disk format, we can cull things in it we really don't need to store: - magic number never changes - padding is not necessary - next_unlinked is never used - inode number is redundant - uuid is redundant - lsn is accessed directly from dinode - inode CRC is only accessed directly from dinode Hence we can remove these from the struct xfs_icdinode and redirect the code that uses them to the xfs_dinode appripriately. This reduces the size of the struct icdinode from 152 bytes to 88 bytes, and removes a fair chunk of unnecessary code, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-09 05:54:58 +00:00
void xfs_inode_to_disk(struct xfs_inode *ip, struct xfs_dinode *to,
xfs_lsn_t lsn);
xfs: remove timestamps from incore inode The struct xfs_inode has two copies of the current timestamps in it, one in the vfs inode and one in the struct xfs_icdinode. Now that we no longer log the struct xfs_icdinode directly, we don't need to keep the timestamps in this structure. instead we can copy them straight out of the VFS inode when formatting the inode log item or the on-disk inode. This reduces the struct xfs_inode in size by 24 bytes. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-09 05:54:58 +00:00
void xfs_inode_from_disk(struct xfs_inode *ip, struct xfs_dinode *from);
void xfs_log_dinode_to_disk(struct xfs_log_dinode *from,
struct xfs_dinode *to);
xfs: introduce xfs_inode_buf.c for inode buffer operations The only thing remaining in xfs_inode.[ch] are the operations that read, write or verify physical inodes in their underlying buffers. Move all this code to xfs_inode_buf.[ch] and so we can stop sharing xfs_inode.[ch] with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 10:49:35 +00:00
#if defined(DEBUG)
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:45 +00:00
void xfs_inobp_check(struct xfs_mount *, struct xfs_buf *);
xfs: introduce xfs_inode_buf.c for inode buffer operations The only thing remaining in xfs_inode.[ch] are the operations that read, write or verify physical inodes in their underlying buffers. Move all this code to xfs_inode_buf.[ch] and so we can stop sharing xfs_inode.[ch] with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 10:49:35 +00:00
#else
#define xfs_inobp_check(mp, bp)
#endif /* DEBUG */
#endif /* __XFS_INODE_BUF_H__ */
Reference in New Issue Copy Permalink