linux/drivers/video/backlight/lp855x_bl.c

550 lines
12 KiB
C
Raw Normal View History

/*
* TI LP855x Backlight Driver
*
* Copyright (C) 2011 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/platform_data/lp855x.h>
#include <linux/pwm.h>
#include <linux/regulator/consumer.h>
/* LP8550/1/2/3/6 Registers */
#define LP855X_BRIGHTNESS_CTRL 0x00
#define LP855X_DEVICE_CTRL 0x01
#define LP855X_EEPROM_START 0xA0
#define LP855X_EEPROM_END 0xA7
#define LP8556_EPROM_START 0xA0
#define LP8556_EPROM_END 0xAF
/* LP8555/7 Registers */
#define LP8557_BL_CMD 0x00
#define LP8557_BL_MASK 0x01
#define LP8557_BL_ON 0x01
#define LP8557_BL_OFF 0x00
#define LP8557_BRIGHTNESS_CTRL 0x04
#define LP8557_CONFIG 0x10
#define LP8555_EPROM_START 0x10
#define LP8555_EPROM_END 0x7A
#define LP8557_EPROM_START 0x10
#define LP8557_EPROM_END 0x1E
#define DEFAULT_BL_NAME "lcd-backlight"
#define MAX_BRIGHTNESS 255
enum lp855x_brightness_ctrl_mode {
PWM_BASED = 1,
REGISTER_BASED,
};
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
struct lp855x;
/*
* struct lp855x_device_config
* @pre_init_device: init device function call before updating the brightness
* @reg_brightness: register address for brigthenss control
* @reg_devicectrl: register address for device control
* @post_init_device: late init device function call
*/
struct lp855x_device_config {
int (*pre_init_device)(struct lp855x *);
u8 reg_brightness;
u8 reg_devicectrl;
int (*post_init_device)(struct lp855x *);
};
struct lp855x {
const char *chipname;
enum lp855x_chip_id chip_id;
enum lp855x_brightness_ctrl_mode mode;
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
struct lp855x_device_config *cfg;
struct i2c_client *client;
struct backlight_device *bl;
struct device *dev;
struct lp855x_platform_data *pdata;
struct pwm_device *pwm;
struct regulator *supply; /* regulator for VDD input */
struct regulator *enable; /* regulator for EN/VDDIO input */
};
static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
{
return i2c_smbus_write_byte_data(lp->client, reg, data);
}
static int lp855x_update_bit(struct lp855x *lp, u8 reg, u8 mask, u8 data)
{
int ret;
u8 tmp;
ret = i2c_smbus_read_byte_data(lp->client, reg);
if (ret < 0) {
dev_err(lp->dev, "failed to read 0x%.2x\n", reg);
return ret;
}
tmp = (u8)ret;
tmp &= ~mask;
tmp |= data & mask;
return lp855x_write_byte(lp, reg, tmp);
}
static bool lp855x_is_valid_rom_area(struct lp855x *lp, u8 addr)
{
u8 start, end;
switch (lp->chip_id) {
case LP8550:
case LP8551:
case LP8552:
case LP8553:
start = LP855X_EEPROM_START;
end = LP855X_EEPROM_END;
break;
case LP8556:
start = LP8556_EPROM_START;
end = LP8556_EPROM_END;
break;
case LP8555:
start = LP8555_EPROM_START;
end = LP8555_EPROM_END;
break;
case LP8557:
start = LP8557_EPROM_START;
end = LP8557_EPROM_END;
break;
default:
return false;
}
return addr >= start && addr <= end;
}
static int lp8557_bl_off(struct lp855x *lp)
{
/* BL_ON = 0 before updating EPROM settings */
return lp855x_update_bit(lp, LP8557_BL_CMD, LP8557_BL_MASK,
LP8557_BL_OFF);
}
static int lp8557_bl_on(struct lp855x *lp)
{
/* BL_ON = 1 after updating EPROM settings */
return lp855x_update_bit(lp, LP8557_BL_CMD, LP8557_BL_MASK,
LP8557_BL_ON);
}
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
static struct lp855x_device_config lp855x_dev_cfg = {
.reg_brightness = LP855X_BRIGHTNESS_CTRL,
.reg_devicectrl = LP855X_DEVICE_CTRL,
};
static struct lp855x_device_config lp8557_dev_cfg = {
.reg_brightness = LP8557_BRIGHTNESS_CTRL,
.reg_devicectrl = LP8557_CONFIG,
.pre_init_device = lp8557_bl_off,
.post_init_device = lp8557_bl_on,
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
};
/*
* Device specific configuration flow
*
* a) pre_init_device(optional)
* b) update the brightness register
* c) update device control register
* d) update ROM area(optional)
* e) post_init_device(optional)
*
*/
static int lp855x_configure(struct lp855x *lp)
{
u8 val, addr;
int i, ret;
struct lp855x_platform_data *pd = lp->pdata;
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
switch (lp->chip_id) {
case LP8550:
case LP8551:
case LP8552:
case LP8553:
case LP8556:
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
lp->cfg = &lp855x_dev_cfg;
break;
case LP8555:
case LP8557:
lp->cfg = &lp8557_dev_cfg;
break;
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
default:
return -EINVAL;
}
if (lp->cfg->pre_init_device) {
ret = lp->cfg->pre_init_device(lp);
if (ret) {
dev_err(lp->dev, "pre init device err: %d\n", ret);
goto err;
}
}
val = pd->initial_brightness;
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
ret = lp855x_write_byte(lp, lp->cfg->reg_brightness, val);
if (ret)
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
goto err;
val = pd->device_control;
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
ret = lp855x_write_byte(lp, lp->cfg->reg_devicectrl, val);
if (ret)
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
goto err;
if (pd->size_program > 0) {
for (i = 0; i < pd->size_program; i++) {
addr = pd->rom_data[i].addr;
val = pd->rom_data[i].val;
if (!lp855x_is_valid_rom_area(lp, addr))
continue;
ret = lp855x_write_byte(lp, addr, val);
if (ret)
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
goto err;
}
}
if (lp->cfg->post_init_device) {
ret = lp->cfg->post_init_device(lp);
if (ret) {
dev_err(lp->dev, "post init device err: %d\n", ret);
goto err;
}
}
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
return 0;
err:
return ret;
}
static void lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br)
{
unsigned int period = lp->pdata->period_ns;
unsigned int duty = br * period / max_br;
struct pwm_device *pwm;
/* request pwm device with the consumer name */
if (!lp->pwm) {
pwm = devm_pwm_get(lp->dev, lp->chipname);
if (IS_ERR(pwm))
return;
lp->pwm = pwm;
/*
* FIXME: pwm_apply_args() should be removed when switching to
* the atomic PWM API.
*/
pwm_apply_args(pwm);
}
pwm_config(lp->pwm, duty, period);
if (duty)
pwm_enable(lp->pwm);
else
pwm_disable(lp->pwm);
}
static int lp855x_bl_update_status(struct backlight_device *bl)
{
struct lp855x *lp = bl_get_data(bl);
int brightness = bl->props.brightness;
if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
brightness = 0;
if (lp->mode == PWM_BASED)
lp855x_pwm_ctrl(lp, brightness, bl->props.max_brightness);
else if (lp->mode == REGISTER_BASED)
lp855x_write_byte(lp, lp->cfg->reg_brightness, (u8)brightness);
return 0;
}
static const struct backlight_ops lp855x_bl_ops = {
.options = BL_CORE_SUSPENDRESUME,
.update_status = lp855x_bl_update_status,
};
static int lp855x_backlight_register(struct lp855x *lp)
{
struct backlight_device *bl;
struct backlight_properties props;
struct lp855x_platform_data *pdata = lp->pdata;
const char *name = pdata->name ? : DEFAULT_BL_NAME;
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_PLATFORM;
props.max_brightness = MAX_BRIGHTNESS;
if (pdata->initial_brightness > props.max_brightness)
pdata->initial_brightness = props.max_brightness;
props.brightness = pdata->initial_brightness;
bl = devm_backlight_device_register(lp->dev, name, lp->dev, lp,
&lp855x_bl_ops, &props);
if (IS_ERR(bl))
return PTR_ERR(bl);
lp->bl = bl;
return 0;
}
static ssize_t lp855x_get_chip_id(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct lp855x *lp = dev_get_drvdata(dev);
return scnprintf(buf, PAGE_SIZE, "%s\n", lp->chipname);
}
static ssize_t lp855x_get_bl_ctl_mode(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct lp855x *lp = dev_get_drvdata(dev);
char *strmode = NULL;
if (lp->mode == PWM_BASED)
strmode = "pwm based";
else if (lp->mode == REGISTER_BASED)
strmode = "register based";
return scnprintf(buf, PAGE_SIZE, "%s\n", strmode);
}
static DEVICE_ATTR(chip_id, S_IRUGO, lp855x_get_chip_id, NULL);
static DEVICE_ATTR(bl_ctl_mode, S_IRUGO, lp855x_get_bl_ctl_mode, NULL);
static struct attribute *lp855x_attributes[] = {
&dev_attr_chip_id.attr,
&dev_attr_bl_ctl_mode.attr,
NULL,
};
static const struct attribute_group lp855x_attr_group = {
.attrs = lp855x_attributes,
};
#ifdef CONFIG_OF
static int lp855x_parse_dt(struct lp855x *lp)
{
struct device *dev = lp->dev;
struct device_node *node = dev->of_node;
struct lp855x_platform_data *pdata;
int rom_length;
if (!node) {
dev_err(dev, "no platform data\n");
return -EINVAL;
}
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
of_property_read_string(node, "bl-name", &pdata->name);
of_property_read_u8(node, "dev-ctrl", &pdata->device_control);
of_property_read_u8(node, "init-brt", &pdata->initial_brightness);
of_property_read_u32(node, "pwm-period", &pdata->period_ns);
/* Fill ROM platform data if defined */
rom_length = of_get_child_count(node);
if (rom_length > 0) {
struct lp855x_rom_data *rom;
struct device_node *child;
int i = 0;
rom = devm_kzalloc(dev, sizeof(*rom) * rom_length, GFP_KERNEL);
if (!rom)
return -ENOMEM;
for_each_child_of_node(node, child) {
of_property_read_u8(child, "rom-addr", &rom[i].addr);
of_property_read_u8(child, "rom-val", &rom[i].val);
i++;
}
pdata->size_program = rom_length;
pdata->rom_data = &rom[0];
}
lp->pdata = pdata;
return 0;
}
#else
static int lp855x_parse_dt(struct lp855x *lp)
{
return -EINVAL;
}
#endif
static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
{
struct lp855x *lp;
int ret;
if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
return -EIO;
lp = devm_kzalloc(&cl->dev, sizeof(struct lp855x), GFP_KERNEL);
if (!lp)
return -ENOMEM;
lp->client = cl;
lp->dev = &cl->dev;
lp->chipname = id->name;
lp->chip_id = id->driver_data;
lp->pdata = dev_get_platdata(&cl->dev);
if (!lp->pdata) {
ret = lp855x_parse_dt(lp);
if (ret < 0)
return ret;
}
if (lp->pdata->period_ns > 0)
lp->mode = PWM_BASED;
else
lp->mode = REGISTER_BASED;
lp->supply = devm_regulator_get(lp->dev, "power");
if (IS_ERR(lp->supply)) {
if (PTR_ERR(lp->supply) == -EPROBE_DEFER)
return -EPROBE_DEFER;
lp->supply = NULL;
}
lp->enable = devm_regulator_get_optional(lp->dev, "enable");
if (IS_ERR(lp->enable)) {
ret = PTR_ERR(lp->enable);
if (ret == -ENODEV) {
lp->enable = NULL;
} else {
if (ret != -EPROBE_DEFER)
dev_err(lp->dev, "error getting enable regulator: %d\n",
ret);
return ret;
}
}
if (lp->supply) {
ret = regulator_enable(lp->supply);
if (ret < 0) {
dev_err(&cl->dev, "failed to enable supply: %d\n", ret);
return ret;
}
}
if (lp->enable) {
ret = regulator_enable(lp->enable);
if (ret < 0) {
dev_err(lp->dev, "failed to enable vddio: %d\n", ret);
return ret;
}
/*
* LP8555 datasheet says t_RESPONSE (time between VDDIO and
* I2C) is 1ms.
*/
usleep_range(1000, 2000);
}
i2c_set_clientdata(cl, lp);
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
ret = lp855x_configure(lp);
if (ret) {
backlight: lp855x_bl: introduce device configuration flow At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 00:44:05 +00:00
dev_err(lp->dev, "device config err: %d", ret);
return ret;
}
ret = lp855x_backlight_register(lp);
if (ret) {
dev_err(lp->dev,
"failed to register backlight. err: %d\n", ret);
return ret;
}
ret = sysfs_create_group(&lp->dev->kobj, &lp855x_attr_group);
if (ret) {
dev_err(lp->dev, "failed to register sysfs. err: %d\n", ret);
return ret;
}
backlight_update_status(lp->bl);
return 0;
}
static int lp855x_remove(struct i2c_client *cl)
{
struct lp855x *lp = i2c_get_clientdata(cl);
lp->bl->props.brightness = 0;
backlight_update_status(lp->bl);
if (lp->supply)
regulator_disable(lp->supply);
sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
return 0;
}
static const struct of_device_id lp855x_dt_ids[] = {
{ .compatible = "ti,lp8550", },
{ .compatible = "ti,lp8551", },
{ .compatible = "ti,lp8552", },
{ .compatible = "ti,lp8553", },
{ .compatible = "ti,lp8555", },
{ .compatible = "ti,lp8556", },
{ .compatible = "ti,lp8557", },
{ }
};
MODULE_DEVICE_TABLE(of, lp855x_dt_ids);
static const struct i2c_device_id lp855x_ids[] = {
{"lp8550", LP8550},
{"lp8551", LP8551},
{"lp8552", LP8552},
{"lp8553", LP8553},
{"lp8555", LP8555},
{"lp8556", LP8556},
{"lp8557", LP8557},
{ }
};
MODULE_DEVICE_TABLE(i2c, lp855x_ids);
static struct i2c_driver lp855x_driver = {
.driver = {
.name = "lp855x",
.of_match_table = of_match_ptr(lp855x_dt_ids),
},
.probe = lp855x_probe,
.remove = lp855x_remove,
.id_table = lp855x_ids,
};
module_i2c_driver(lp855x_driver);
MODULE_DESCRIPTION("Texas Instruments LP855x Backlight driver");
MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
MODULE_LICENSE("GPL");