linux/drivers/usb/host/xhci-plat.c

519 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* xhci-plat.c - xHCI host controller driver platform Bus Glue.
*
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com
* Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* A lot of code borrowed from the Linux xHCI driver.
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/usb/phy.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/usb/of.h>
#include "xhci.h"
#include "xhci-plat.h"
#include "xhci-mvebu.h"
#include "xhci-rcar.h"
static struct hc_driver __read_mostly xhci_plat_hc_driver;
static int xhci_plat_setup(struct usb_hcd *hcd);
static int xhci_plat_start(struct usb_hcd *hcd);
static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
.extra_priv_size = sizeof(struct xhci_plat_priv),
.reset = xhci_plat_setup,
.start = xhci_plat_start,
};
static void xhci_priv_plat_start(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (priv->plat_start)
priv->plat_start(hcd);
}
static int xhci_priv_init_quirk(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (!priv->init_quirk)
return 0;
return priv->init_quirk(hcd);
}
static int xhci_priv_suspend_quirk(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (!priv->suspend_quirk)
return 0;
return priv->suspend_quirk(hcd);
}
static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
if (!priv->resume_quirk)
return 0;
return priv->resume_quirk(hcd);
}
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
struct xhci_plat_priv *priv = xhci_to_priv(xhci);
/*
* As of now platform drivers don't provide MSI support so we ensure
* here that the generic code does not try to make a pci_dev from our
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_PLAT | priv->quirks;
}
/* called during probe() after chip reset completes */
static int xhci_plat_setup(struct usb_hcd *hcd)
{
int ret;
ret = xhci_priv_init_quirk(hcd);
if (ret)
return ret;
return xhci_gen_setup(hcd, xhci_plat_quirks);
}
static int xhci_plat_start(struct usb_hcd *hcd)
{
xhci_priv_plat_start(hcd);
return xhci_run(hcd);
}
#ifdef CONFIG_OF
static const struct xhci_plat_priv xhci_plat_marvell_armada = {
.init_quirk = xhci_mvebu_mbus_init_quirk,
};
static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
.init_quirk = xhci_mvebu_a3700_init_quirk,
};
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1)
};
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3)
};
static const struct xhci_plat_priv xhci_plat_brcm = {
.quirks = XHCI_RESET_ON_RESUME,
};
static const struct of_device_id usb_xhci_of_match[] = {
{
.compatible = "generic-xhci",
}, {
.compatible = "xhci-platform",
}, {
.compatible = "marvell,armada-375-xhci",
.data = &xhci_plat_marvell_armada,
}, {
.compatible = "marvell,armada-380-xhci",
.data = &xhci_plat_marvell_armada,
}, {
.compatible = "marvell,armada3700-xhci",
.data = &xhci_plat_marvell_armada3700,
}, {
.compatible = "renesas,xhci-r8a7790",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,xhci-r8a7791",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,xhci-r8a7793",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,xhci-r8a7795",
.data = &xhci_plat_renesas_rcar_gen3,
}, {
.compatible = "renesas,xhci-r8a7796",
.data = &xhci_plat_renesas_rcar_gen3,
}, {
.compatible = "renesas,rcar-gen2-xhci",
.data = &xhci_plat_renesas_rcar_gen2,
}, {
.compatible = "renesas,rcar-gen3-xhci",
.data = &xhci_plat_renesas_rcar_gen3,
}, {
.compatible = "brcm,xhci-brcm-v2",
.data = &xhci_plat_brcm,
}, {
.compatible = "brcm,bcm7445-xhci",
.data = &xhci_plat_brcm,
},
{},
};
MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
#endif
static int xhci_plat_probe(struct platform_device *pdev)
{
const struct xhci_plat_priv *priv_match;
const struct hc_driver *driver;
struct device *sysdev, *tmpdev;
struct xhci_hcd *xhci;
struct resource *res;
struct usb_hcd *hcd;
int ret;
int irq;
struct xhci_plat_priv *priv = NULL;
if (usb_disabled())
return -ENODEV;
driver = &xhci_plat_hc_driver;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
/*
* sysdev must point to a device that is known to the system firmware
* or PCI hardware. We handle these three cases here:
* 1. xhci_plat comes from firmware
* 2. xhci_plat is child of a device from firmware (dwc3-plat)
* 3. xhci_plat is grandchild of a pci device (dwc3-pci)
*/
usb: host: xhci-plat: allow sysdev to inherit from ACPI Commit 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") updated the method determining DMA for XHCI from sysdev. However, this patch broke the ability to enumerate the FWNODE from parent ACPI devices from the child plat XHCI device. Currently, xhci_plat is not set up properly when the parent device is an ACPI node. The conditions that xhci_plat_probe should satisfy are 1. xhci_plat comes from firmware 2. xhci_plat is child of a device from firmware (dwc3-plat) 3. xhci_plat is grandchild of a pci device (dwc3-pci) Case 2 is covered when the child is an OF node (by checking sysdev->parent->of_node), however, an ACPI parent will return NULL in the of_node check and will thus not result in sysdev being set to sysdev->parent [ 17.591549] xhci-hcd: probe of xhci-hcd.6.auto failed with error -5 This change adds a check for ACPI to completely allow for condition 2. This is done by first checking if the parent node is of type ACPI (e.g., dwc3-plat) and set sysdev to sysdev->parent if either of the two following conditions are met: 1: If fwnode is empty (in the case that platform_device_add_properties was not called on the allocated platform device) 2: fwnode exists but is not of type ACPI (this would happen if platform_device_add_properties was called on the allocated device. Instead of type FWNODE_ACPI, you would end up with FWNODE_PDATA) Cc: stable@vger.kernel.org #4.12.x Cc: stable@vger.kernel.org #4.13.x Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") Tested-by: Thang Q. Nguyen <tqnguyen@apm.com> Signed-off-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18 14:39:16 +00:00
for (sysdev = &pdev->dev; sysdev; sysdev = sysdev->parent) {
if (is_of_node(sysdev->fwnode) ||
is_acpi_device_node(sysdev->fwnode))
break;
#ifdef CONFIG_PCI
usb: host: xhci-plat: allow sysdev to inherit from ACPI Commit 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") updated the method determining DMA for XHCI from sysdev. However, this patch broke the ability to enumerate the FWNODE from parent ACPI devices from the child plat XHCI device. Currently, xhci_plat is not set up properly when the parent device is an ACPI node. The conditions that xhci_plat_probe should satisfy are 1. xhci_plat comes from firmware 2. xhci_plat is child of a device from firmware (dwc3-plat) 3. xhci_plat is grandchild of a pci device (dwc3-pci) Case 2 is covered when the child is an OF node (by checking sysdev->parent->of_node), however, an ACPI parent will return NULL in the of_node check and will thus not result in sysdev being set to sysdev->parent [ 17.591549] xhci-hcd: probe of xhci-hcd.6.auto failed with error -5 This change adds a check for ACPI to completely allow for condition 2. This is done by first checking if the parent node is of type ACPI (e.g., dwc3-plat) and set sysdev to sysdev->parent if either of the two following conditions are met: 1: If fwnode is empty (in the case that platform_device_add_properties was not called on the allocated platform device) 2: fwnode exists but is not of type ACPI (this would happen if platform_device_add_properties was called on the allocated device. Instead of type FWNODE_ACPI, you would end up with FWNODE_PDATA) Cc: stable@vger.kernel.org #4.12.x Cc: stable@vger.kernel.org #4.13.x Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") Tested-by: Thang Q. Nguyen <tqnguyen@apm.com> Signed-off-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18 14:39:16 +00:00
else if (sysdev->bus == &pci_bus_type)
break;
#endif
usb: host: xhci-plat: allow sysdev to inherit from ACPI Commit 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") updated the method determining DMA for XHCI from sysdev. However, this patch broke the ability to enumerate the FWNODE from parent ACPI devices from the child plat XHCI device. Currently, xhci_plat is not set up properly when the parent device is an ACPI node. The conditions that xhci_plat_probe should satisfy are 1. xhci_plat comes from firmware 2. xhci_plat is child of a device from firmware (dwc3-plat) 3. xhci_plat is grandchild of a pci device (dwc3-pci) Case 2 is covered when the child is an OF node (by checking sysdev->parent->of_node), however, an ACPI parent will return NULL in the of_node check and will thus not result in sysdev being set to sysdev->parent [ 17.591549] xhci-hcd: probe of xhci-hcd.6.auto failed with error -5 This change adds a check for ACPI to completely allow for condition 2. This is done by first checking if the parent node is of type ACPI (e.g., dwc3-plat) and set sysdev to sysdev->parent if either of the two following conditions are met: 1: If fwnode is empty (in the case that platform_device_add_properties was not called on the allocated platform device) 2: fwnode exists but is not of type ACPI (this would happen if platform_device_add_properties was called on the allocated device. Instead of type FWNODE_ACPI, you would end up with FWNODE_PDATA) Cc: stable@vger.kernel.org #4.12.x Cc: stable@vger.kernel.org #4.13.x Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") Tested-by: Thang Q. Nguyen <tqnguyen@apm.com> Signed-off-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18 14:39:16 +00:00
}
if (!sysdev)
sysdev = &pdev->dev;
/* Try to set 64-bit DMA first */
if (WARN_ON(!sysdev->dma_mask))
/* Platform did not initialize dma_mask */
ret = dma_coerce_mask_and_coherent(sysdev,
DMA_BIT_MASK(64));
xhci: fix dma mask setup in xhci.c The function dma_set_mask() tests internally whether the dma_mask pointer for the device is initialized and fails if the dma_mask pointer is NULL. On pci platforms, the device dma_mask pointer is initialized, when pci devices are enumerated, to point to the pci_dev->dma_mask which is 0xffffffff. However, for non-pci platforms, the dma_mask pointer may not be initialized and in that case dma_set_mask() will fail. This patch initializes the dma_mask and the coherent_dma_mask to 32bits in xhci_plat_probe(), before the call to usb_create_hcd() that sets the "uses_dma" flag for the usb bus and the call to usb_add_hcd() that creates coherent dma pools for the usb hcd. Moreover, a call to dma_set_mask() does not set the device coherent_dma_mask. Since the xhci-hcd driver calls dma_alloc_coherent() and dma_pool_alloc() to allocate consistent DMA memory blocks, the coherent DMA address mask has to be set explicitly. This patch sets the coherent_dma_mask to 64bits in xhci_gen_setup() when the xHC is capable for 64-bit DMA addressing. If dma_set_mask() succeeds, for a given bitmask, it is guaranteed that the given bitmask is also supported for consistent DMA mappings. Other changes introduced in this patch are: - The return value of dma_set_mask() is checked to ensure that the required dma bitmask conforms with the host system's addressing capabilities. - The dma_mask setup code for the non-primary hcd was removed since both primary and non-primary hcd refer to the same generic device whose dma_mask and coherent_dma_mask are already set during the setup of the primary hcd. - The code for reading the HCCPARAMS register to find out the addressing capabilities of xHC was removed since its value is already cached in xhci->hccparams. - hcd->self.controller was replaced with the dev variable since it is already available. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-08-14 02:55:19 +00:00
else
ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(64));
/* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */
if (ret) {
ret = dma_set_mask_and_coherent(sysdev, DMA_BIT_MASK(32));
if (ret)
return ret;
}
xhci: fix dma mask setup in xhci.c The function dma_set_mask() tests internally whether the dma_mask pointer for the device is initialized and fails if the dma_mask pointer is NULL. On pci platforms, the device dma_mask pointer is initialized, when pci devices are enumerated, to point to the pci_dev->dma_mask which is 0xffffffff. However, for non-pci platforms, the dma_mask pointer may not be initialized and in that case dma_set_mask() will fail. This patch initializes the dma_mask and the coherent_dma_mask to 32bits in xhci_plat_probe(), before the call to usb_create_hcd() that sets the "uses_dma" flag for the usb bus and the call to usb_add_hcd() that creates coherent dma pools for the usb hcd. Moreover, a call to dma_set_mask() does not set the device coherent_dma_mask. Since the xhci-hcd driver calls dma_alloc_coherent() and dma_pool_alloc() to allocate consistent DMA memory blocks, the coherent DMA address mask has to be set explicitly. This patch sets the coherent_dma_mask to 64bits in xhci_gen_setup() when the xHC is capable for 64-bit DMA addressing. If dma_set_mask() succeeds, for a given bitmask, it is guaranteed that the given bitmask is also supported for consistent DMA mappings. Other changes introduced in this patch are: - The return value of dma_set_mask() is checked to ensure that the required dma bitmask conforms with the host system's addressing capabilities. - The dma_mask setup code for the non-primary hcd was removed since both primary and non-primary hcd refer to the same generic device whose dma_mask and coherent_dma_mask are already set during the setup of the primary hcd. - The code for reading the HCCPARAMS register to find out the addressing capabilities of xHC was removed since its value is already cached in xhci->hccparams. - hcd->self.controller was replaced with the dev variable since it is already available. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-08-14 02:55:19 +00:00
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
dev_name(&pdev->dev), NULL);
if (!hcd) {
ret = -ENOMEM;
goto disable_runtime;
}
hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(hcd->regs)) {
ret = PTR_ERR(hcd->regs);
goto put_hcd;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
xhci = hcd_to_xhci(hcd);
/*
* Not all platforms have clks so it is not an error if the
* clock do not exist.
*/
xhci->reg_clk = devm_clk_get_optional(&pdev->dev, "reg");
if (IS_ERR(xhci->reg_clk)) {
ret = PTR_ERR(xhci->reg_clk);
goto put_hcd;
}
ret = clk_prepare_enable(xhci->reg_clk);
if (ret)
goto put_hcd;
xhci->clk = devm_clk_get_optional(&pdev->dev, NULL);
if (IS_ERR(xhci->clk)) {
ret = PTR_ERR(xhci->clk);
goto disable_reg_clk;
}
ret = clk_prepare_enable(xhci->clk);
if (ret)
goto disable_reg_clk;
if (pdev->dev.of_node)
priv_match = of_device_get_match_data(&pdev->dev);
else
priv_match = dev_get_platdata(&pdev->dev);
if (priv_match) {
priv = hcd_to_xhci_priv(hcd);
/* Just copy data for now */
*priv = *priv_match;
}
device_set_wakeup_capable(&pdev->dev, true);
xhci->main_hcd = hcd;
xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
dev_name(&pdev->dev), hcd);
if (!xhci->shared_hcd) {
ret = -ENOMEM;
goto disable_clk;
}
/* imod_interval is the interrupt moderation value in nanoseconds. */
xhci->imod_interval = 40000;
/* Iterate over all parent nodes for finding quirks */
for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
xhci->quirks |= XHCI_HW_LPM_DISABLE;
if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
xhci->quirks |= XHCI_LPM_SUPPORT;
if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
xhci->quirks |= XHCI_BROKEN_PORT_PED;
device_property_read_u32(tmpdev, "imod-interval-ns",
&xhci->imod_interval);
}
hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
if (IS_ERR(hcd->usb_phy)) {
ret = PTR_ERR(hcd->usb_phy);
if (ret == -EPROBE_DEFER)
goto put_usb3_hcd;
hcd->usb_phy = NULL;
} else {
ret = usb_phy_init(hcd->usb_phy);
if (ret)
goto put_usb3_hcd;
}
hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
xhci->shared_hcd->tpl_support = hcd->tpl_support;
if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
hcd->skip_phy_initialization = 1;
if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto disable_usb_phy;
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
if (ret)
goto dealloc_usb2_hcd;
device_enable_async_suspend(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
/*
* Prevent runtime pm from being on as default, users should enable
* runtime pm using power/control in sysfs.
*/
pm_runtime_forbid(&pdev->dev);
return 0;
dealloc_usb2_hcd:
usb_remove_hcd(hcd);
disable_usb_phy:
usb_phy_shutdown(hcd->usb_phy);
put_usb3_hcd:
usb_put_hcd(xhci->shared_hcd);
disable_clk:
clk_disable_unprepare(xhci->clk);
disable_reg_clk:
clk_disable_unprepare(xhci->reg_clk);
put_hcd:
usb_put_hcd(hcd);
disable_runtime:
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
static int xhci_plat_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct clk *clk = xhci->clk;
struct clk *reg_clk = xhci->reg_clk;
xhci: Fix leaking USB3 shared_hcd at xhci removal Ensure that the shared_hcd pointer is valid when calling usb_put_hcd() The shared_hcd is removed and freed in xhci by first calling usb_remove_hcd(xhci->shared_hcd), and later usb_put_hcd(xhci->shared_hcd) Afer commit fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") the shared_hcd was never properly put as xhci->shared_hcd was set to NULL before usb_put_hcd(xhci->shared_hcd) was called. shared_hcd (USB3) is removed before primary hcd (USB2). While removing the primary hcd we might need to handle xhci interrupts to cleanly remove last USB2 devices, therefore we need to set xhci->shared_hcd to NULL before removing the primary hcd to let xhci interrupt handler know shared_hcd is no longer available. xhci-plat.c, xhci-histb.c and xhci-mtk first create both their hcd's before adding them. so to keep the correct reverse removal order use a temporary shared_hcd variable for them. For more details see commit 4ac53087d6d4 ("usb: xhci: plat: Create both HCDs before adding them") Fixes: fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") Cc: Joel Stanley <joel@jms.id.au> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: <stable@vger.kernel.org> Reported-by: Jack Pham <jackp@codeaurora.org> Tested-by: Jack Pham <jackp@codeaurora.org> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09 15:21:17 +00:00
struct usb_hcd *shared_hcd = xhci->shared_hcd;
usb: host: xhci-plat: keep runtime active when removing host While removing the host (e.g. for USB role switch from host to device), if runtime pm is enabled by user, below oops occurs on dwc3 and cdns3 platforms. Keeping the xhci-plat device active during host removal, and disabling runtime pm before calling pm_runtime_set_suspended() fixes them. oops1: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000240 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.4.3-00107-g64d454a-dirty Hardware name: FSL i.MX8MP EVK (DT) Workqueue: pm pm_runtime_work pstate: 60000005 (nZCv daif -PAN -UAO) pc : xhci_suspend+0x34/0x698 lr : xhci_plat_runtime_suspend+0x2c/0x38 sp : ffff800011ddbbc0 Call trace: xhci_suspend+0x34/0x698 xhci_plat_runtime_suspend+0x2c/0x38 pm_generic_runtime_suspend+0x28/0x40 __rpm_callback+0xd8/0x138 rpm_callback+0x24/0x98 rpm_suspend+0xe0/0x448 rpm_idle+0x124/0x140 pm_runtime_work+0xa0/0xf8 process_one_work+0x1dc/0x370 worker_thread+0x48/0x468 kthread+0xf0/0x120 ret_from_fork+0x10/0x1c oops2: usb 2-1: USB disconnect, device number 2 xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb2: USB disconnect, device number 1 xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb1: USB disconnect, device number 1 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000138 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.6.0-rc4-next-20200304-03578 Hardware name: Freescale i.MX8QXP MEK (DT) Workqueue: 1-0050 tcpm_state_machine_work pstate: 20000005 (nzCv daif -PAN -UAO) pc : xhci_free_dev+0x214/0x270 lr : xhci_plat_runtime_resume+0x78/0x88 sp : ffff80001006b5b0 Call trace: xhci_free_dev+0x214/0x270 xhci_plat_runtime_resume+0x78/0x88 pm_generic_runtime_resume+0x30/0x48 __rpm_callback+0x90/0x148 rpm_callback+0x28/0x88 rpm_resume+0x568/0x758 rpm_resume+0x260/0x758 rpm_resume+0x260/0x758 __pm_runtime_resume+0x40/0x88 device_release_driver_internal+0xa0/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 usb_disable_device+0xb0/0x268 usb_disconnect+0xcc/0x300 usb_remove_hcd+0xf4/0x1dc xhci_plat_remove+0x78/0xe0 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xfc/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 platform_device_del.part.0+0x20/0x90 platform_device_unregister+0x28/0x40 cdns3_host_exit+0x20/0x40 cdns3_role_stop+0x60/0x90 cdns3_role_set+0x64/0xd8 usb_role_switch_set_role.part.0+0x3c/0x68 usb_role_switch_set_role+0x20/0x30 tcpm_mux_set+0x60/0xf8 tcpm_reset_port+0xa4/0xf0 tcpm_detach.part.0+0x28/0x50 tcpm_state_machine_work+0x12ac/0x2360 process_one_work+0x1c8/0x470 worker_thread+0x50/0x428 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: c8037c02 35ffffa3 17ffe7c3 f9800011 (c85f7c01) ---[ end trace 45b1a173d2679e44 ]--- [minor commit message cleanup -Mathias] Cc: Baolin Wang <baolin.wang@linaro.org> Cc: <stable@vger.kernel.org> Fixes: b0c69b4bace3 ("usb: host: plat: Enable xHCI plat runtime PM") Reviewed-by: Peter Chen <peter.chen@nxp.com> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200514110432.25564-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 11:04:32 +00:00
pm_runtime_get_sync(&dev->dev);
xhci->xhc_state |= XHCI_STATE_REMOVING;
xhci: Fix leaking USB3 shared_hcd at xhci removal Ensure that the shared_hcd pointer is valid when calling usb_put_hcd() The shared_hcd is removed and freed in xhci by first calling usb_remove_hcd(xhci->shared_hcd), and later usb_put_hcd(xhci->shared_hcd) Afer commit fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") the shared_hcd was never properly put as xhci->shared_hcd was set to NULL before usb_put_hcd(xhci->shared_hcd) was called. shared_hcd (USB3) is removed before primary hcd (USB2). While removing the primary hcd we might need to handle xhci interrupts to cleanly remove last USB2 devices, therefore we need to set xhci->shared_hcd to NULL before removing the primary hcd to let xhci interrupt handler know shared_hcd is no longer available. xhci-plat.c, xhci-histb.c and xhci-mtk first create both their hcd's before adding them. so to keep the correct reverse removal order use a temporary shared_hcd variable for them. For more details see commit 4ac53087d6d4 ("usb: xhci: plat: Create both HCDs before adding them") Fixes: fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") Cc: Joel Stanley <joel@jms.id.au> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: <stable@vger.kernel.org> Reported-by: Jack Pham <jackp@codeaurora.org> Tested-by: Jack Pham <jackp@codeaurora.org> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09 15:21:17 +00:00
usb_remove_hcd(shared_hcd);
xhci->shared_hcd = NULL;
usb_phy_shutdown(hcd->usb_phy);
usb_remove_hcd(hcd);
xhci: Fix leaking USB3 shared_hcd at xhci removal Ensure that the shared_hcd pointer is valid when calling usb_put_hcd() The shared_hcd is removed and freed in xhci by first calling usb_remove_hcd(xhci->shared_hcd), and later usb_put_hcd(xhci->shared_hcd) Afer commit fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") the shared_hcd was never properly put as xhci->shared_hcd was set to NULL before usb_put_hcd(xhci->shared_hcd) was called. shared_hcd (USB3) is removed before primary hcd (USB2). While removing the primary hcd we might need to handle xhci interrupts to cleanly remove last USB2 devices, therefore we need to set xhci->shared_hcd to NULL before removing the primary hcd to let xhci interrupt handler know shared_hcd is no longer available. xhci-plat.c, xhci-histb.c and xhci-mtk first create both their hcd's before adding them. so to keep the correct reverse removal order use a temporary shared_hcd variable for them. For more details see commit 4ac53087d6d4 ("usb: xhci: plat: Create both HCDs before adding them") Fixes: fe190ed0d602 ("xhci: Do not halt the host until both HCD have disconnected their devices.") Cc: Joel Stanley <joel@jms.id.au> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: <stable@vger.kernel.org> Reported-by: Jack Pham <jackp@codeaurora.org> Tested-by: Jack Pham <jackp@codeaurora.org> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09 15:21:17 +00:00
usb_put_hcd(shared_hcd);
clk_disable_unprepare(clk);
clk_disable_unprepare(reg_clk);
usb_put_hcd(hcd);
pm_runtime_disable(&dev->dev);
usb: host: xhci-plat: keep runtime active when removing host While removing the host (e.g. for USB role switch from host to device), if runtime pm is enabled by user, below oops occurs on dwc3 and cdns3 platforms. Keeping the xhci-plat device active during host removal, and disabling runtime pm before calling pm_runtime_set_suspended() fixes them. oops1: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000240 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.4.3-00107-g64d454a-dirty Hardware name: FSL i.MX8MP EVK (DT) Workqueue: pm pm_runtime_work pstate: 60000005 (nZCv daif -PAN -UAO) pc : xhci_suspend+0x34/0x698 lr : xhci_plat_runtime_suspend+0x2c/0x38 sp : ffff800011ddbbc0 Call trace: xhci_suspend+0x34/0x698 xhci_plat_runtime_suspend+0x2c/0x38 pm_generic_runtime_suspend+0x28/0x40 __rpm_callback+0xd8/0x138 rpm_callback+0x24/0x98 rpm_suspend+0xe0/0x448 rpm_idle+0x124/0x140 pm_runtime_work+0xa0/0xf8 process_one_work+0x1dc/0x370 worker_thread+0x48/0x468 kthread+0xf0/0x120 ret_from_fork+0x10/0x1c oops2: usb 2-1: USB disconnect, device number 2 xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb2: USB disconnect, device number 1 xhci-hcd xhci-hcd.1.auto: USB bus 2 deregistered xhci-hcd xhci-hcd.1.auto: remove, state 4 usb usb1: USB disconnect, device number 1 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000138 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.6.0-rc4-next-20200304-03578 Hardware name: Freescale i.MX8QXP MEK (DT) Workqueue: 1-0050 tcpm_state_machine_work pstate: 20000005 (nzCv daif -PAN -UAO) pc : xhci_free_dev+0x214/0x270 lr : xhci_plat_runtime_resume+0x78/0x88 sp : ffff80001006b5b0 Call trace: xhci_free_dev+0x214/0x270 xhci_plat_runtime_resume+0x78/0x88 pm_generic_runtime_resume+0x30/0x48 __rpm_callback+0x90/0x148 rpm_callback+0x28/0x88 rpm_resume+0x568/0x758 rpm_resume+0x260/0x758 rpm_resume+0x260/0x758 __pm_runtime_resume+0x40/0x88 device_release_driver_internal+0xa0/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 usb_disable_device+0xb0/0x268 usb_disconnect+0xcc/0x300 usb_remove_hcd+0xf4/0x1dc xhci_plat_remove+0x78/0xe0 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xfc/0x1c8 device_release_driver+0x1c/0x28 bus_remove_device+0xd4/0x158 device_del+0x15c/0x3a0 platform_device_del.part.0+0x20/0x90 platform_device_unregister+0x28/0x40 cdns3_host_exit+0x20/0x40 cdns3_role_stop+0x60/0x90 cdns3_role_set+0x64/0xd8 usb_role_switch_set_role.part.0+0x3c/0x68 usb_role_switch_set_role+0x20/0x30 tcpm_mux_set+0x60/0xf8 tcpm_reset_port+0xa4/0xf0 tcpm_detach.part.0+0x28/0x50 tcpm_state_machine_work+0x12ac/0x2360 process_one_work+0x1c8/0x470 worker_thread+0x50/0x428 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: c8037c02 35ffffa3 17ffe7c3 f9800011 (c85f7c01) ---[ end trace 45b1a173d2679e44 ]--- [minor commit message cleanup -Mathias] Cc: Baolin Wang <baolin.wang@linaro.org> Cc: <stable@vger.kernel.org> Fixes: b0c69b4bace3 ("usb: host: plat: Enable xHCI plat runtime PM") Reviewed-by: Peter Chen <peter.chen@nxp.com> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200514110432.25564-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-14 11:04:32 +00:00
pm_runtime_put_noidle(&dev->dev);
pm_runtime_set_suspended(&dev->dev);
return 0;
}
static int __maybe_unused xhci_plat_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ret;
ret = xhci_priv_suspend_quirk(hcd);
if (ret)
return ret;
/*
* xhci_suspend() needs `do_wakeup` to know whether host is allowed
* to do wakeup during suspend.
*/
return xhci_suspend(xhci, device_may_wakeup(dev));
}
static int __maybe_unused xhci_plat_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ret;
ret = xhci_priv_resume_quirk(hcd);
if (ret)
return ret;
ret = xhci_resume(xhci, 0);
if (ret)
return ret;
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
return 0;
}
static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int ret;
ret = xhci_priv_suspend_quirk(hcd);
if (ret)
return ret;
return xhci_suspend(xhci, true);
}
static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
return xhci_resume(xhci, 0);
}
static const struct dev_pm_ops xhci_plat_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
xhci_plat_runtime_resume,
NULL)
};
#ifdef CONFIG_ACPI
static const struct acpi_device_id usb_xhci_acpi_match[] = {
/* XHCI-compliant USB Controller */
{ "PNP0D10", },
{ }
};
MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
#endif
static struct platform_driver usb_xhci_driver = {
.probe = xhci_plat_probe,
.remove = xhci_plat_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "xhci-hcd",
.pm = &xhci_plat_pm_ops,
.of_match_table = of_match_ptr(usb_xhci_of_match),
.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
},
};
MODULE_ALIAS("platform:xhci-hcd");
static int __init xhci_plat_init(void)
{
xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides);
return platform_driver_register(&usb_xhci_driver);
}
module_init(xhci_plat_init);
static void __exit xhci_plat_exit(void)
{
platform_driver_unregister(&usb_xhci_driver);
}
module_exit(xhci_plat_exit);
MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
MODULE_LICENSE("GPL");