leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
beab47d55b
linux/drivers/scsi/qla2xxx/Kconfig

48 lines
1.4 KiB
Plaintext
Raw Normal View History

[SCSI] qla2xxx: Kconfig: two fixes Original From: Adrian Bunk Here's a composite patch with Adrian's original additions and help-text with the new Kconfig variable SCSI_QLA_FC. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-09 18:17:40 +00:00
config SCSI_QLA_FC
[SCSI] qla2xxx: Add full firmware(-request) hotplug support for all ISPs. Transition driver to exclusively use the request_firmware() interfaces to retrieve firmware-blobs from user-space. This will be the default behaviour going forward until the embedded firmware-binary images are removed from the upstream kernel. Upon request, the driver caches the firmware image until the driver is unloaded. NOTE: The option is present to allow the user to continue to use the firmware-loader modules, but, should be considered deprecated. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09 23:49:04 +00:00
tristate "QLogic QLA2XXX Fibre Channel Support"
depends on PCI && SCSI
scsi: use 'depends' instead of 'select' for SCSI_FC_ATTRS There are other kconfig symbols which use SCSI_FC_ATTRS. In order to maintain sanity and prevent kconfig warnings, change all of these from using 'select' to using 'depends on' so that proper symbol dependencies will be honored and circular depends problems will be avoided. This fixes kconfig warnings and build errors: warning: (LIBFC && SCSI_IBMVFC && SCSI_QLA_FC && SCSI_LPFC && ZFCP && SCSI_BFA_FC && SCSI_CHELSIO_FCOE && FUSION_FC) selects SCSI_FC_ATTRS which has unmet direct dependencies (SCSI && NET) drivers/scsi/scsi_transport_fc.c: In function 'fc_host_post_event': drivers/scsi/scsi_transport_fc.c:543:7: error: 'scsi_nl_sock' undeclared (first use in this function) drivers/scsi/scsi_transport_fc.c: In function 'fc_host_post_vendor_event': drivers/scsi/scsi_transport_fc.c:611:7: error: 'scsi_nl_sock' undeclared (first use in this function) Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-16 20:47:41 +00:00
depends on SCSI_FC_ATTRS
[SCSI] qla2xxx: Add full firmware(-request) hotplug support for all ISPs. Transition driver to exclusively use the request_firmware() interfaces to retrieve firmware-blobs from user-space. This will be the default behaviour going forward until the embedded firmware-binary images are removed from the upstream kernel. Upon request, the driver caches the firmware image until the driver is unloaded. NOTE: The option is present to allow the user to continue to use the firmware-loader modules, but, should be considered deprecated. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09 23:49:04 +00:00
select FW_LOADER
---help---
This qla2xxx driver supports all QLogic Fibre Channel
PCI and PCIe host adapters.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[SCSI] qla2xxx: Add full firmware(-request) hotplug support for all ISPs. Transition driver to exclusively use the request_firmware() interfaces to retrieve firmware-blobs from user-space. This will be the default behaviour going forward until the embedded firmware-binary images are removed from the upstream kernel. Upon request, the driver caches the firmware image until the driver is unloaded. NOTE: The option is present to allow the user to continue to use the firmware-loader modules, but, should be considered deprecated. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09 23:49:04 +00:00
By default, firmware for the ISP parts will be loaded
via the Firmware Loader interface.
[SCSI] qla2xxx: Consolidate ISP63xx handling. As new 23xx firmware will accomidate ISP63xx types. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-09 22:27:18 +00:00
ISP Firmware Filename
---------- -----------------
21xx ql2100_fw.bin
22xx ql2200_fw.bin
2300, 2312, 6312 ql2300_fw.bin
2322, 6322 ql2322_fw.bin
[SCSI] qla2xxx: Update firmware filenames for new ISP parts. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 20:13:12 +00:00
24xx, 54xx ql2400_fw.bin
25xx ql2500_fw.bin
[SCSI] qla2xxx: Add full firmware(-request) hotplug support for all ISPs. Transition driver to exclusively use the request_firmware() interfaces to retrieve firmware-blobs from user-space. This will be the default behaviour going forward until the embedded firmware-binary images are removed from the upstream kernel. Upon request, the driver caches the firmware image until the driver is unloaded. NOTE: The option is present to allow the user to continue to use the firmware-loader modules, but, should be considered deprecated. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09 23:49:04 +00:00
Upon request, the driver caches the firmware image until
the driver is unloaded.
[SCSI] qla2xxx: Kconfig update: Add URL to download firmware images. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 01:05:53 +00:00
Firmware images can be retrieved from:
[SCSI] qla2xxx: Update firmware link in Kconfig file. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-03-07 15:30:22 +00:00
http://ldriver.qlogic.com/firmware/
They are also included in the linux-firmware tree as well.
[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access. This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code. The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session(). (nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs + change tcm_qla2xxx_nacl->nport_id to u32 (DanC)) (danc: tcm_qla2xxx: checking for NULL instead of IS_ERR()) (roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain + Add hook so qla_target code can shutdown sessions) (steveh: Convert FC address map from flat array to btree) (randy: fix qla2xxx printk format warnings for size_t) (joern: Make most of tcm_qla2xxx static + remove unnecessary workqueue_struct prototypes + use WWN_SIZE instead of hard-coded constants) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:29 +00:00
config TCM_QLA2XXX
qla2xxx: Update tcm_qla2xxx module description to 24xx+ Pre 24xx HBAs are not supported by tcm_qla2xxx, so go ahead and reflect this for informational purposes. Also fix QLogic spelling. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-08-02 22:21:50 +00:00
tristate "TCM_QLA2XXX fabric module for QLogic 24xx+ series target mode HBAs"
[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access. This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code. The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session(). (nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs + change tcm_qla2xxx_nacl->nport_id to u32 (DanC)) (danc: tcm_qla2xxx: checking for NULL instead of IS_ERR()) (roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain + Add hook so qla_target code can shutdown sessions) (steveh: Convert FC address map from flat array to btree) (randy: fix qla2xxx printk format warnings for size_t) (joern: Make most of tcm_qla2xxx static + remove unnecessary workqueue_struct prototypes + use WWN_SIZE instead of hard-coded constants) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:29 +00:00
depends on SCSI_QLA_FC && TARGET_CORE
scsi: Use 'depends' with LIBFC instead of 'select'. LIBFC depends upon SCSI_FC_ATTRS and select's CRC32C. The only alternative would be to 'select' CRC32C and all of SCSI_FC_ATTRS direct and indirect dependencies in the Kconfig section for every LIBFCOE user which makes little sense. Subsequently, use 'depends' instead of 'select' for LIBFCOE too. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22 17:14:33 +00:00
depends on LIBFC
[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core This patch adds support for tcm_qla2xxx fabric module for target-core using the new qla_target.c LLD logic. This includes support for explict NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc struct fc_host->rports, and demo-mode support for virtual LUN=0 access. This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template ->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of locations into the primary I/O dispatch logic in qla_target.c LLD code. The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(), which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our lport->lport_fcport_map and lport_loopid_map pointers respectively, and register the new nexus with TCM via __transport_register_session(). (nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs + change tcm_qla2xxx_nacl->nport_id to u32 (DanC)) (danc: tcm_qla2xxx: checking for NULL instead of IS_ERR()) (roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain + Add hook so qla_target code can shutdown sessions) (steveh: Convert FC address map from flat array to btree) (randy: fix qla2xxx printk format warnings for size_t) (joern: Make most of tcm_qla2xxx static + remove unnecessary workqueue_struct prototypes + use WWN_SIZE instead of hard-coded constants) Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-15 18:34:29 +00:00
select BTREE
default n
---help---
qla2xxx: Update tcm_qla2xxx module description to 24xx+ Pre 24xx HBAs are not supported by tcm_qla2xxx, so go ahead and reflect this for informational purposes. Also fix QLogic spelling. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-08-02 22:21:50 +00:00
Say Y here to enable the TCM_QLA2XXX fabric module for QLogic 24xx+ series target mode HBAs
tcm_qla2xxx Add SCSI command jammer/discard capability This patch introduces support for TCM_QLA2XXX_DEBUG and associated tcm_qla2xxx_tpg->tpg_attrib.jam_host checking used to test dropped packets to FC host environments. Tested by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Laurence Oberman <loberman@redhat.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-05-10 08:23:17 +00:00
if TCM_QLA2XXX
config TCM_QLA2XXX_DEBUG
bool "TCM_QLA2XXX fabric module DEBUG mode for QLogic 24xx+ series target mode HBAs"
default n
---help---
Say Y here to enable the TCM_QLA2XXX fabric module DEBUG for QLogic 24xx+ series target mode HBAs
This will include code to enable the SCSI command jammer
endif
Reference in New Issue Copy Permalink