forked from Minki/linux
1344 lines
32 KiB
C
1344 lines
32 KiB
C
|
/*
|
||
|
* linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
|
||
|
*
|
||
|
* Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License version 2 as
|
||
|
* published by the Free Software Foundation.
|
||
|
*/
|
||
|
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/dma-mapping.h>
|
||
|
#include <linux/clk.h>
|
||
|
#include <linux/mmc/host.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/irq.h>
|
||
|
#include <linux/io.h>
|
||
|
|
||
|
#include <asm/dma.h>
|
||
|
|
||
|
#include <asm/arch/regs-sdi.h>
|
||
|
#include <asm/arch/regs-gpio.h>
|
||
|
|
||
|
#include "s3cmci.h"
|
||
|
|
||
|
#define DRIVER_NAME "s3c-mci"
|
||
|
|
||
|
enum dbg_channels {
|
||
|
dbg_err = (1 << 0),
|
||
|
dbg_debug = (1 << 1),
|
||
|
dbg_info = (1 << 2),
|
||
|
dbg_irq = (1 << 3),
|
||
|
dbg_sg = (1 << 4),
|
||
|
dbg_dma = (1 << 5),
|
||
|
dbg_pio = (1 << 6),
|
||
|
dbg_fail = (1 << 7),
|
||
|
dbg_conf = (1 << 8),
|
||
|
};
|
||
|
|
||
|
static const int dbgmap_err = dbg_err | dbg_fail;
|
||
|
static const int dbgmap_info = dbg_info | dbg_conf;
|
||
|
static const int dbgmap_debug = dbg_debug;
|
||
|
|
||
|
#define dbg(host, channels, args...) \
|
||
|
do { \
|
||
|
if (dbgmap_err & channels) \
|
||
|
dev_err(&host->pdev->dev, args); \
|
||
|
else if (dbgmap_info & channels) \
|
||
|
dev_info(&host->pdev->dev, args); \
|
||
|
else if (dbgmap_debug & channels) \
|
||
|
dev_dbg(&host->pdev->dev, args); \
|
||
|
} while (0)
|
||
|
|
||
|
#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
|
||
|
|
||
|
static struct s3c2410_dma_client s3cmci_dma_client = {
|
||
|
.name = "s3c-mci",
|
||
|
};
|
||
|
|
||
|
static void finalize_request(struct s3cmci_host *host);
|
||
|
static void s3cmci_send_request(struct mmc_host *mmc);
|
||
|
static void s3cmci_reset(struct s3cmci_host *host);
|
||
|
|
||
|
#ifdef CONFIG_MMC_DEBUG
|
||
|
|
||
|
static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
|
||
|
{
|
||
|
u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize;
|
||
|
u32 datcon, datcnt, datsta, fsta, imask;
|
||
|
|
||
|
con = readl(host->base + S3C2410_SDICON);
|
||
|
pre = readl(host->base + S3C2410_SDIPRE);
|
||
|
cmdarg = readl(host->base + S3C2410_SDICMDARG);
|
||
|
cmdcon = readl(host->base + S3C2410_SDICMDCON);
|
||
|
cmdsta = readl(host->base + S3C2410_SDICMDSTAT);
|
||
|
r0 = readl(host->base + S3C2410_SDIRSP0);
|
||
|
r1 = readl(host->base + S3C2410_SDIRSP1);
|
||
|
r2 = readl(host->base + S3C2410_SDIRSP2);
|
||
|
r3 = readl(host->base + S3C2410_SDIRSP3);
|
||
|
timer = readl(host->base + S3C2410_SDITIMER);
|
||
|
bsize = readl(host->base + S3C2410_SDIBSIZE);
|
||
|
datcon = readl(host->base + S3C2410_SDIDCON);
|
||
|
datcnt = readl(host->base + S3C2410_SDIDCNT);
|
||
|
datsta = readl(host->base + S3C2410_SDIDSTA);
|
||
|
fsta = readl(host->base + S3C2410_SDIFSTA);
|
||
|
imask = readl(host->base + host->sdiimsk);
|
||
|
|
||
|
dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n",
|
||
|
prefix, con, pre, timer);
|
||
|
|
||
|
dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n",
|
||
|
prefix, cmdcon, cmdarg, cmdsta);
|
||
|
|
||
|
dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]"
|
||
|
" DSTA:[%08x] DCNT:[%08x]\n",
|
||
|
prefix, datcon, fsta, datsta, datcnt);
|
||
|
|
||
|
dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]"
|
||
|
" R2:[%08x] R3:[%08x]\n",
|
||
|
prefix, r0, r1, r2, r3);
|
||
|
}
|
||
|
|
||
|
static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
|
||
|
int stop)
|
||
|
{
|
||
|
snprintf(host->dbgmsg_cmd, 300,
|
||
|
"#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u",
|
||
|
host->ccnt, (stop ? " (STOP)" : ""),
|
||
|
cmd->opcode, cmd->arg, cmd->flags, cmd->retries);
|
||
|
|
||
|
if (cmd->data) {
|
||
|
snprintf(host->dbgmsg_dat, 300,
|
||
|
"#%u bsize:%u blocks:%u bytes:%u",
|
||
|
host->dcnt, cmd->data->blksz,
|
||
|
cmd->data->blocks,
|
||
|
cmd->data->blocks * cmd->data->blksz);
|
||
|
} else {
|
||
|
host->dbgmsg_dat[0] = '\0';
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd,
|
||
|
int fail)
|
||
|
{
|
||
|
unsigned int dbglvl = fail ? dbg_fail : dbg_debug;
|
||
|
|
||
|
if (!cmd)
|
||
|
return;
|
||
|
|
||
|
if (cmd->error == 0) {
|
||
|
dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n",
|
||
|
host->dbgmsg_cmd, cmd->resp[0]);
|
||
|
} else {
|
||
|
dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n",
|
||
|
cmd->error, host->dbgmsg_cmd, host->status);
|
||
|
}
|
||
|
|
||
|
if (!cmd->data)
|
||
|
return;
|
||
|
|
||
|
if (cmd->data->error == 0) {
|
||
|
dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat);
|
||
|
} else {
|
||
|
dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n",
|
||
|
cmd->data->error, host->dbgmsg_dat,
|
||
|
readl(host->base + S3C2410_SDIDCNT));
|
||
|
}
|
||
|
}
|
||
|
#else
|
||
|
static void dbg_dumpcmd(struct s3cmci_host *host,
|
||
|
struct mmc_command *cmd, int fail) { }
|
||
|
|
||
|
static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
|
||
|
int stop) { }
|
||
|
|
||
|
static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
|
||
|
|
||
|
#endif /* CONFIG_MMC_DEBUG */
|
||
|
|
||
|
static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
|
||
|
{
|
||
|
u32 newmask;
|
||
|
|
||
|
newmask = readl(host->base + host->sdiimsk);
|
||
|
newmask |= imask;
|
||
|
|
||
|
writel(newmask, host->base + host->sdiimsk);
|
||
|
|
||
|
return newmask;
|
||
|
}
|
||
|
|
||
|
static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
|
||
|
{
|
||
|
u32 newmask;
|
||
|
|
||
|
newmask = readl(host->base + host->sdiimsk);
|
||
|
newmask &= ~imask;
|
||
|
|
||
|
writel(newmask, host->base + host->sdiimsk);
|
||
|
|
||
|
return newmask;
|
||
|
}
|
||
|
|
||
|
static inline void clear_imask(struct s3cmci_host *host)
|
||
|
{
|
||
|
writel(0, host->base + host->sdiimsk);
|
||
|
}
|
||
|
|
||
|
static inline int get_data_buffer(struct s3cmci_host *host,
|
||
|
u32 *words, u32 **pointer)
|
||
|
{
|
||
|
struct scatterlist *sg;
|
||
|
|
||
|
if (host->pio_active == XFER_NONE)
|
||
|
return -EINVAL;
|
||
|
|
||
|
if ((!host->mrq) || (!host->mrq->data))
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (host->pio_sgptr >= host->mrq->data->sg_len) {
|
||
|
dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
|
||
|
host->pio_sgptr, host->mrq->data->sg_len);
|
||
|
return -EBUSY;
|
||
|
}
|
||
|
sg = &host->mrq->data->sg[host->pio_sgptr];
|
||
|
|
||
|
*words = sg->length >> 2;
|
||
|
*pointer = sg_virt(sg);
|
||
|
|
||
|
host->pio_sgptr++;
|
||
|
|
||
|
dbg(host, dbg_sg, "new buffer (%i/%i)\n",
|
||
|
host->pio_sgptr, host->mrq->data->sg_len);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static inline u32 fifo_count(struct s3cmci_host *host)
|
||
|
{
|
||
|
u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
|
||
|
|
||
|
fifostat &= S3C2410_SDIFSTA_COUNTMASK;
|
||
|
return fifostat >> 2;
|
||
|
}
|
||
|
|
||
|
static inline u32 fifo_free(struct s3cmci_host *host)
|
||
|
{
|
||
|
u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
|
||
|
|
||
|
fifostat &= S3C2410_SDIFSTA_COUNTMASK;
|
||
|
return (63 - fifostat) >> 2;
|
||
|
}
|
||
|
|
||
|
static void do_pio_read(struct s3cmci_host *host)
|
||
|
{
|
||
|
int res;
|
||
|
u32 fifo;
|
||
|
void __iomem *from_ptr;
|
||
|
|
||
|
/* write real prescaler to host, it might be set slow to fix */
|
||
|
writel(host->prescaler, host->base + S3C2410_SDIPRE);
|
||
|
|
||
|
from_ptr = host->base + host->sdidata;
|
||
|
|
||
|
while ((fifo = fifo_count(host))) {
|
||
|
if (!host->pio_words) {
|
||
|
res = get_data_buffer(host, &host->pio_words,
|
||
|
&host->pio_ptr);
|
||
|
if (res) {
|
||
|
host->pio_active = XFER_NONE;
|
||
|
host->complete_what = COMPLETION_FINALIZE;
|
||
|
|
||
|
dbg(host, dbg_pio, "pio_read(): "
|
||
|
"complete (no more data).\n");
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
dbg(host, dbg_pio,
|
||
|
"pio_read(): new target: [%i]@[%p]\n",
|
||
|
host->pio_words, host->pio_ptr);
|
||
|
}
|
||
|
|
||
|
dbg(host, dbg_pio,
|
||
|
"pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n",
|
||
|
fifo, host->pio_words,
|
||
|
readl(host->base + S3C2410_SDIDCNT));
|
||
|
|
||
|
if (fifo > host->pio_words)
|
||
|
fifo = host->pio_words;
|
||
|
|
||
|
host->pio_words -= fifo;
|
||
|
host->pio_count += fifo;
|
||
|
|
||
|
while (fifo--)
|
||
|
*(host->pio_ptr++) = readl(from_ptr);
|
||
|
}
|
||
|
|
||
|
if (!host->pio_words) {
|
||
|
res = get_data_buffer(host, &host->pio_words, &host->pio_ptr);
|
||
|
if (res) {
|
||
|
dbg(host, dbg_pio,
|
||
|
"pio_read(): complete (no more buffers).\n");
|
||
|
host->pio_active = XFER_NONE;
|
||
|
host->complete_what = COMPLETION_FINALIZE;
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
enable_imask(host,
|
||
|
S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
|
||
|
}
|
||
|
|
||
|
static void do_pio_write(struct s3cmci_host *host)
|
||
|
{
|
||
|
void __iomem *to_ptr;
|
||
|
int res;
|
||
|
u32 fifo;
|
||
|
|
||
|
to_ptr = host->base + host->sdidata;
|
||
|
|
||
|
while ((fifo = fifo_free(host))) {
|
||
|
if (!host->pio_words) {
|
||
|
res = get_data_buffer(host, &host->pio_words,
|
||
|
&host->pio_ptr);
|
||
|
if (res) {
|
||
|
dbg(host, dbg_pio,
|
||
|
"pio_write(): complete (no more data).\n");
|
||
|
host->pio_active = XFER_NONE;
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
dbg(host, dbg_pio,
|
||
|
"pio_write(): new source: [%i]@[%p]\n",
|
||
|
host->pio_words, host->pio_ptr);
|
||
|
|
||
|
}
|
||
|
|
||
|
if (fifo > host->pio_words)
|
||
|
fifo = host->pio_words;
|
||
|
|
||
|
host->pio_words -= fifo;
|
||
|
host->pio_count += fifo;
|
||
|
|
||
|
while (fifo--)
|
||
|
writel(*(host->pio_ptr++), to_ptr);
|
||
|
}
|
||
|
|
||
|
enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
|
||
|
}
|
||
|
|
||
|
static void pio_tasklet(unsigned long data)
|
||
|
{
|
||
|
struct s3cmci_host *host = (struct s3cmci_host *) data;
|
||
|
|
||
|
|
||
|
if (host->pio_active == XFER_WRITE)
|
||
|
do_pio_write(host);
|
||
|
|
||
|
if (host->pio_active == XFER_READ)
|
||
|
do_pio_read(host);
|
||
|
|
||
|
if (host->complete_what == COMPLETION_FINALIZE) {
|
||
|
clear_imask(host);
|
||
|
if (host->pio_active != XFER_NONE) {
|
||
|
dbg(host, dbg_err, "unfinished %s "
|
||
|
"- pio_count:[%u] pio_words:[%u]\n",
|
||
|
(host->pio_active == XFER_READ) ? "read" : "write",
|
||
|
host->pio_count, host->pio_words);
|
||
|
|
||
|
host->mrq->data->error = -EINVAL;
|
||
|
}
|
||
|
|
||
|
disable_irq(host->irq);
|
||
|
finalize_request(host);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* ISR for SDI Interface IRQ
|
||
|
* Communication between driver and ISR works as follows:
|
||
|
* host->mrq points to current request
|
||
|
* host->complete_what Indicates when the request is considered done
|
||
|
* COMPLETION_CMDSENT when the command was sent
|
||
|
* COMPLETION_RSPFIN when a response was received
|
||
|
* COMPLETION_XFERFINISH when the data transfer is finished
|
||
|
* COMPLETION_XFERFINISH_RSPFIN both of the above.
|
||
|
* host->complete_request is the completion-object the driver waits for
|
||
|
*
|
||
|
* 1) Driver sets up host->mrq and host->complete_what
|
||
|
* 2) Driver prepares the transfer
|
||
|
* 3) Driver enables interrupts
|
||
|
* 4) Driver starts transfer
|
||
|
* 5) Driver waits for host->complete_rquest
|
||
|
* 6) ISR checks for request status (errors and success)
|
||
|
* 6) ISR sets host->mrq->cmd->error and host->mrq->data->error
|
||
|
* 7) ISR completes host->complete_request
|
||
|
* 8) ISR disables interrupts
|
||
|
* 9) Driver wakes up and takes care of the request
|
||
|
*
|
||
|
* Note: "->error"-fields are expected to be set to 0 before the request
|
||
|
* was issued by mmc.c - therefore they are only set, when an error
|
||
|
* contition comes up
|
||
|
*/
|
||
|
|
||
|
static irqreturn_t s3cmci_irq(int irq, void *dev_id)
|
||
|
{
|
||
|
struct s3cmci_host *host = dev_id;
|
||
|
struct mmc_command *cmd;
|
||
|
u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
|
||
|
u32 mci_cclear, mci_dclear;
|
||
|
unsigned long iflags;
|
||
|
|
||
|
spin_lock_irqsave(&host->complete_lock, iflags);
|
||
|
|
||
|
mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
|
||
|
mci_dsta = readl(host->base + S3C2410_SDIDSTA);
|
||
|
mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
|
||
|
mci_fsta = readl(host->base + S3C2410_SDIFSTA);
|
||
|
mci_imsk = readl(host->base + host->sdiimsk);
|
||
|
mci_cclear = 0;
|
||
|
mci_dclear = 0;
|
||
|
|
||
|
if ((host->complete_what == COMPLETION_NONE) ||
|
||
|
(host->complete_what == COMPLETION_FINALIZE)) {
|
||
|
host->status = "nothing to complete";
|
||
|
clear_imask(host);
|
||
|
goto irq_out;
|
||
|
}
|
||
|
|
||
|
if (!host->mrq) {
|
||
|
host->status = "no active mrq";
|
||
|
clear_imask(host);
|
||
|
goto irq_out;
|
||
|
}
|
||
|
|
||
|
cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd;
|
||
|
|
||
|
if (!cmd) {
|
||
|
host->status = "no active cmd";
|
||
|
clear_imask(host);
|
||
|
goto irq_out;
|
||
|
}
|
||
|
|
||
|
if (!host->dodma) {
|
||
|
if ((host->pio_active == XFER_WRITE) &&
|
||
|
(mci_fsta & S3C2410_SDIFSTA_TFDET)) {
|
||
|
|
||
|
disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
|
||
|
tasklet_schedule(&host->pio_tasklet);
|
||
|
host->status = "pio tx";
|
||
|
}
|
||
|
|
||
|
if ((host->pio_active == XFER_READ) &&
|
||
|
(mci_fsta & S3C2410_SDIFSTA_RFDET)) {
|
||
|
|
||
|
disable_imask(host,
|
||
|
S3C2410_SDIIMSK_RXFIFOHALF |
|
||
|
S3C2410_SDIIMSK_RXFIFOLAST);
|
||
|
|
||
|
tasklet_schedule(&host->pio_tasklet);
|
||
|
host->status = "pio rx";
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
|
||
|
cmd->error = -ETIMEDOUT;
|
||
|
host->status = "error: command timeout";
|
||
|
goto fail_transfer;
|
||
|
}
|
||
|
|
||
|
if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) {
|
||
|
if (host->complete_what == COMPLETION_CMDSENT) {
|
||
|
host->status = "ok: command sent";
|
||
|
goto close_transfer;
|
||
|
}
|
||
|
|
||
|
mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT;
|
||
|
}
|
||
|
|
||
|
if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) {
|
||
|
if (cmd->flags & MMC_RSP_CRC) {
|
||
|
cmd->error = -EILSEQ;
|
||
|
host->status = "error: bad command crc";
|
||
|
goto fail_transfer;
|
||
|
}
|
||
|
|
||
|
mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL;
|
||
|
}
|
||
|
|
||
|
if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) {
|
||
|
if (host->complete_what == COMPLETION_RSPFIN) {
|
||
|
host->status = "ok: command response received";
|
||
|
goto close_transfer;
|
||
|
}
|
||
|
|
||
|
if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
|
||
|
host->complete_what = COMPLETION_XFERFINISH;
|
||
|
|
||
|
mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN;
|
||
|
}
|
||
|
|
||
|
/* errors handled after this point are only relevant
|
||
|
when a data transfer is in progress */
|
||
|
|
||
|
if (!cmd->data)
|
||
|
goto clear_status_bits;
|
||
|
|
||
|
/* Check for FIFO failure */
|
||
|
if (host->is2440) {
|
||
|
if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
|
||
|
host->mrq->data->error = -EILSEQ;
|
||
|
host->status = "error: 2440 fifo failure";
|
||
|
goto fail_transfer;
|
||
|
}
|
||
|
} else {
|
||
|
if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
|
||
|
cmd->data->error = -EILSEQ;
|
||
|
host->status = "error: fifo failure";
|
||
|
goto fail_transfer;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
|
||
|
cmd->data->error = -EILSEQ;
|
||
|
host->status = "error: bad data crc (outgoing)";
|
||
|
goto fail_transfer;
|
||
|
}
|
||
|
|
||
|
if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
|
||
|
cmd->data->error = -EILSEQ;
|
||
|
host->status = "error: bad data crc (incoming)";
|
||
|
goto fail_transfer;
|
||
|
}
|
||
|
|
||
|
if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
|
||
|
cmd->data->error = -ETIMEDOUT;
|
||
|
host->status = "error: data timeout";
|
||
|
goto fail_transfer;
|
||
|
}
|
||
|
|
||
|
if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) {
|
||
|
if (host->complete_what == COMPLETION_XFERFINISH) {
|
||
|
host->status = "ok: data transfer completed";
|
||
|
goto close_transfer;
|
||
|
}
|
||
|
|
||
|
if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
|
||
|
host->complete_what = COMPLETION_RSPFIN;
|
||
|
|
||
|
mci_dclear |= S3C2410_SDIDSTA_XFERFINISH;
|
||
|
}
|
||
|
|
||
|
clear_status_bits:
|
||
|
writel(mci_cclear, host->base + S3C2410_SDICMDSTAT);
|
||
|
writel(mci_dclear, host->base + S3C2410_SDIDSTA);
|
||
|
|
||
|
goto irq_out;
|
||
|
|
||
|
fail_transfer:
|
||
|
host->pio_active = XFER_NONE;
|
||
|
|
||
|
close_transfer:
|
||
|
host->complete_what = COMPLETION_FINALIZE;
|
||
|
|
||
|
clear_imask(host);
|
||
|
tasklet_schedule(&host->pio_tasklet);
|
||
|
|
||
|
goto irq_out;
|
||
|
|
||
|
irq_out:
|
||
|
dbg(host, dbg_irq,
|
||
|
"csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n",
|
||
|
mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status);
|
||
|
|
||
|
spin_unlock_irqrestore(&host->complete_lock, iflags);
|
||
|
return IRQ_HANDLED;
|
||
|
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* ISR for the CardDetect Pin
|
||
|
*/
|
||
|
|
||
|
static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
|
||
|
{
|
||
|
struct s3cmci_host *host = (struct s3cmci_host *)dev_id;
|
||
|
|
||
|
dbg(host, dbg_irq, "card detect\n");
|
||
|
|
||
|
mmc_detect_change(host->mmc, 500);
|
||
|
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id,
|
||
|
int size, enum s3c2410_dma_buffresult result)
|
||
|
{
|
||
|
struct s3cmci_host *host = buf_id;
|
||
|
unsigned long iflags;
|
||
|
u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt;
|
||
|
|
||
|
mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
|
||
|
mci_dsta = readl(host->base + S3C2410_SDIDSTA);
|
||
|
mci_fsta = readl(host->base + S3C2410_SDIFSTA);
|
||
|
mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
|
||
|
|
||
|
BUG_ON(!host->mrq);
|
||
|
BUG_ON(!host->mrq->data);
|
||
|
BUG_ON(!host->dmatogo);
|
||
|
|
||
|
spin_lock_irqsave(&host->complete_lock, iflags);
|
||
|
|
||
|
if (result != S3C2410_RES_OK) {
|
||
|
dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x "
|
||
|
"fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n",
|
||
|
mci_csta, mci_dsta, mci_fsta,
|
||
|
mci_dcnt, result, host->dmatogo);
|
||
|
|
||
|
goto fail_request;
|
||
|
}
|
||
|
|
||
|
host->dmatogo--;
|
||
|
if (host->dmatogo) {
|
||
|
dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] "
|
||
|
"DCNT:[%08x] toGo:%u\n",
|
||
|
size, mci_dsta, mci_dcnt, host->dmatogo);
|
||
|
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n",
|
||
|
size, mci_dsta, mci_dcnt);
|
||
|
|
||
|
host->complete_what = COMPLETION_FINALIZE;
|
||
|
|
||
|
out:
|
||
|
tasklet_schedule(&host->pio_tasklet);
|
||
|
spin_unlock_irqrestore(&host->complete_lock, iflags);
|
||
|
return;
|
||
|
|
||
|
|
||
|
fail_request:
|
||
|
host->mrq->data->error = -EINVAL;
|
||
|
host->complete_what = COMPLETION_FINALIZE;
|
||
|
writel(0, host->base + host->sdiimsk);
|
||
|
goto out;
|
||
|
|
||
|
}
|
||
|
|
||
|
static void finalize_request(struct s3cmci_host *host)
|
||
|
{
|
||
|
struct mmc_request *mrq = host->mrq;
|
||
|
struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
|
||
|
int debug_as_failure = 0;
|
||
|
|
||
|
if (host->complete_what != COMPLETION_FINALIZE)
|
||
|
return;
|
||
|
|
||
|
if (!mrq)
|
||
|
return;
|
||
|
|
||
|
if (cmd->data && (cmd->error == 0) &&
|
||
|
(cmd->data->error == 0)) {
|
||
|
if (host->dodma && (!host->dma_complete)) {
|
||
|
dbg(host, dbg_dma, "DMA Missing!\n");
|
||
|
return;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* Read response from controller. */
|
||
|
cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
|
||
|
cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
|
||
|
cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
|
||
|
cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);
|
||
|
|
||
|
writel(host->prescaler, host->base + S3C2410_SDIPRE);
|
||
|
|
||
|
if (cmd->error)
|
||
|
debug_as_failure = 1;
|
||
|
|
||
|
if (cmd->data && cmd->data->error)
|
||
|
debug_as_failure = 1;
|
||
|
|
||
|
dbg_dumpcmd(host, cmd, debug_as_failure);
|
||
|
|
||
|
/* Cleanup controller */
|
||
|
writel(0, host->base + S3C2410_SDICMDARG);
|
||
|
writel(0, host->base + S3C2410_SDIDCON);
|
||
|
writel(0, host->base + S3C2410_SDICMDCON);
|
||
|
writel(0, host->base + host->sdiimsk);
|
||
|
|
||
|
if (cmd->data && cmd->error)
|
||
|
cmd->data->error = cmd->error;
|
||
|
|
||
|
if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
|
||
|
host->cmd_is_stop = 1;
|
||
|
s3cmci_send_request(host->mmc);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/* If we have no data transfer we are finished here */
|
||
|
if (!mrq->data)
|
||
|
goto request_done;
|
||
|
|
||
|
/* Calulate the amout of bytes transfer if there was no error */
|
||
|
if (mrq->data->error == 0) {
|
||
|
mrq->data->bytes_xfered =
|
||
|
(mrq->data->blocks * mrq->data->blksz);
|
||
|
} else {
|
||
|
mrq->data->bytes_xfered = 0;
|
||
|
}
|
||
|
|
||
|
/* If we had an error while transfering data we flush the
|
||
|
* DMA channel and the fifo to clear out any garbage. */
|
||
|
if (mrq->data->error != 0) {
|
||
|
if (host->dodma)
|
||
|
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
|
||
|
|
||
|
if (host->is2440) {
|
||
|
/* Clear failure register and reset fifo. */
|
||
|
writel(S3C2440_SDIFSTA_FIFORESET |
|
||
|
S3C2440_SDIFSTA_FIFOFAIL,
|
||
|
host->base + S3C2410_SDIFSTA);
|
||
|
} else {
|
||
|
u32 mci_con;
|
||
|
|
||
|
/* reset fifo */
|
||
|
mci_con = readl(host->base + S3C2410_SDICON);
|
||
|
mci_con |= S3C2410_SDICON_FIFORESET;
|
||
|
|
||
|
writel(mci_con, host->base + S3C2410_SDICON);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
request_done:
|
||
|
host->complete_what = COMPLETION_NONE;
|
||
|
host->mrq = NULL;
|
||
|
mmc_request_done(host->mmc, mrq);
|
||
|
}
|
||
|
|
||
|
|
||
|
void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source)
|
||
|
{
|
||
|
static enum s3c2410_dmasrc last_source = -1;
|
||
|
static int setup_ok;
|
||
|
|
||
|
if (last_source == source)
|
||
|
return;
|
||
|
|
||
|
last_source = source;
|
||
|
|
||
|
s3c2410_dma_devconfig(host->dma, source, 3,
|
||
|
host->mem->start + host->sdidata);
|
||
|
|
||
|
if (!setup_ok) {
|
||
|
s3c2410_dma_config(host->dma, 4,
|
||
|
(S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI));
|
||
|
s3c2410_dma_set_buffdone_fn(host->dma,
|
||
|
s3cmci_dma_done_callback);
|
||
|
s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
|
||
|
setup_ok = 1;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void s3cmci_send_command(struct s3cmci_host *host,
|
||
|
struct mmc_command *cmd)
|
||
|
{
|
||
|
u32 ccon, imsk;
|
||
|
|
||
|
imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT |
|
||
|
S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT |
|
||
|
S3C2410_SDIIMSK_RESPONSECRC;
|
||
|
|
||
|
enable_imask(host, imsk);
|
||
|
|
||
|
if (cmd->data)
|
||
|
host->complete_what = COMPLETION_XFERFINISH_RSPFIN;
|
||
|
else if (cmd->flags & MMC_RSP_PRESENT)
|
||
|
host->complete_what = COMPLETION_RSPFIN;
|
||
|
else
|
||
|
host->complete_what = COMPLETION_CMDSENT;
|
||
|
|
||
|
writel(cmd->arg, host->base + S3C2410_SDICMDARG);
|
||
|
|
||
|
ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX;
|
||
|
ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART;
|
||
|
|
||
|
if (cmd->flags & MMC_RSP_PRESENT)
|
||
|
ccon |= S3C2410_SDICMDCON_WAITRSP;
|
||
|
|
||
|
if (cmd->flags & MMC_RSP_136)
|
||
|
ccon |= S3C2410_SDICMDCON_LONGRSP;
|
||
|
|
||
|
writel(ccon, host->base + S3C2410_SDICMDCON);
|
||
|
}
|
||
|
|
||
|
static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
|
||
|
{
|
||
|
u32 dcon, imsk, stoptries = 3;
|
||
|
|
||
|
/* write DCON register */
|
||
|
|
||
|
if (!data) {
|
||
|
writel(0, host->base + S3C2410_SDIDCON);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
while (readl(host->base + S3C2410_SDIDSTA) &
|
||
|
(S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) {
|
||
|
|
||
|
dbg(host, dbg_err,
|
||
|
"mci_setup_data() transfer stillin progress.\n");
|
||
|
|
||
|
writel(0, host->base + S3C2410_SDIDCON);
|
||
|
s3cmci_reset(host);
|
||
|
|
||
|
if ((stoptries--) == 0) {
|
||
|
dbg_dumpregs(host, "DRF");
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
|
||
|
|
||
|
if (host->dodma)
|
||
|
dcon |= S3C2410_SDIDCON_DMAEN;
|
||
|
|
||
|
if (host->bus_width == MMC_BUS_WIDTH_4)
|
||
|
dcon |= S3C2410_SDIDCON_WIDEBUS;
|
||
|
|
||
|
if (!(data->flags & MMC_DATA_STREAM))
|
||
|
dcon |= S3C2410_SDIDCON_BLOCKMODE;
|
||
|
|
||
|
if (data->flags & MMC_DATA_WRITE) {
|
||
|
dcon |= S3C2410_SDIDCON_TXAFTERRESP;
|
||
|
dcon |= S3C2410_SDIDCON_XFER_TXSTART;
|
||
|
}
|
||
|
|
||
|
if (data->flags & MMC_DATA_READ) {
|
||
|
dcon |= S3C2410_SDIDCON_RXAFTERCMD;
|
||
|
dcon |= S3C2410_SDIDCON_XFER_RXSTART;
|
||
|
}
|
||
|
|
||
|
if (host->is2440) {
|
||
|
dcon |= S3C2440_SDIDCON_DS_WORD;
|
||
|
dcon |= S3C2440_SDIDCON_DATSTART;
|
||
|
}
|
||
|
|
||
|
writel(dcon, host->base + S3C2410_SDIDCON);
|
||
|
|
||
|
/* write BSIZE register */
|
||
|
|
||
|
writel(data->blksz, host->base + S3C2410_SDIBSIZE);
|
||
|
|
||
|
/* add to IMASK register */
|
||
|
imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC |
|
||
|
S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH;
|
||
|
|
||
|
enable_imask(host, imsk);
|
||
|
|
||
|
/* write TIMER register */
|
||
|
|
||
|
if (host->is2440) {
|
||
|
writel(0x007FFFFF, host->base + S3C2410_SDITIMER);
|
||
|
} else {
|
||
|
writel(0x0000FFFF, host->base + S3C2410_SDITIMER);
|
||
|
|
||
|
/* FIX: set slow clock to prevent timeouts on read */
|
||
|
if (data->flags & MMC_DATA_READ)
|
||
|
writel(0xFF, host->base + S3C2410_SDIPRE);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
|
||
|
|
||
|
static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
|
||
|
{
|
||
|
int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
|
||
|
|
||
|
BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
|
||
|
|
||
|
host->pio_sgptr = 0;
|
||
|
host->pio_words = 0;
|
||
|
host->pio_count = 0;
|
||
|
host->pio_active = rw ? XFER_WRITE : XFER_READ;
|
||
|
|
||
|
if (rw) {
|
||
|
do_pio_write(host);
|
||
|
enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
|
||
|
} else {
|
||
|
enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF
|
||
|
| S3C2410_SDIIMSK_RXFIFOLAST);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
|
||
|
{
|
||
|
int dma_len, i;
|
||
|
int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
|
||
|
|
||
|
BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
|
||
|
|
||
|
s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW);
|
||
|
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
|
||
|
|
||
|
dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
|
||
|
(rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
|
||
|
|
||
|
if (dma_len == 0)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
host->dma_complete = 0;
|
||
|
host->dmatogo = dma_len;
|
||
|
|
||
|
for (i = 0; i < dma_len; i++) {
|
||
|
int res;
|
||
|
|
||
|
dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i,
|
||
|
sg_dma_address(&data->sg[i]),
|
||
|
sg_dma_len(&data->sg[i]));
|
||
|
|
||
|
res = s3c2410_dma_enqueue(host->dma, (void *) host,
|
||
|
sg_dma_address(&data->sg[i]),
|
||
|
sg_dma_len(&data->sg[i]));
|
||
|
|
||
|
if (res) {
|
||
|
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
|
||
|
return -EBUSY;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void s3cmci_send_request(struct mmc_host *mmc)
|
||
|
{
|
||
|
struct s3cmci_host *host = mmc_priv(mmc);
|
||
|
struct mmc_request *mrq = host->mrq;
|
||
|
struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
|
||
|
|
||
|
host->ccnt++;
|
||
|
prepare_dbgmsg(host, cmd, host->cmd_is_stop);
|
||
|
|
||
|
/* Clear command, data and fifo status registers
|
||
|
Fifo clear only necessary on 2440, but doesn't hurt on 2410
|
||
|
*/
|
||
|
writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT);
|
||
|
writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA);
|
||
|
writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA);
|
||
|
|
||
|
if (cmd->data) {
|
||
|
int res = s3cmci_setup_data(host, cmd->data);
|
||
|
|
||
|
host->dcnt++;
|
||
|
|
||
|
if (res) {
|
||
|
cmd->error = -EINVAL;
|
||
|
cmd->data->error = -EINVAL;
|
||
|
|
||
|
mmc_request_done(mmc, mrq);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
if (host->dodma)
|
||
|
res = s3cmci_prepare_dma(host, cmd->data);
|
||
|
else
|
||
|
res = s3cmci_prepare_pio(host, cmd->data);
|
||
|
|
||
|
if (res) {
|
||
|
cmd->error = res;
|
||
|
cmd->data->error = res;
|
||
|
|
||
|
mmc_request_done(mmc, mrq);
|
||
|
return;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* Send command */
|
||
|
s3cmci_send_command(host, cmd);
|
||
|
|
||
|
/* Enable Interrupt */
|
||
|
enable_irq(host->irq);
|
||
|
}
|
||
|
|
||
|
static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
||
|
{
|
||
|
struct s3cmci_host *host = mmc_priv(mmc);
|
||
|
|
||
|
host->status = "mmc request";
|
||
|
host->cmd_is_stop = 0;
|
||
|
host->mrq = mrq;
|
||
|
|
||
|
s3cmci_send_request(mmc);
|
||
|
}
|
||
|
|
||
|
static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
||
|
{
|
||
|
struct s3cmci_host *host = mmc_priv(mmc);
|
||
|
u32 mci_psc, mci_con;
|
||
|
|
||
|
/* Set the power state */
|
||
|
|
||
|
mci_con = readl(host->base + S3C2410_SDICON);
|
||
|
|
||
|
switch (ios->power_mode) {
|
||
|
case MMC_POWER_ON:
|
||
|
case MMC_POWER_UP:
|
||
|
s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK);
|
||
|
s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD);
|
||
|
s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0);
|
||
|
s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
|
||
|
s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2);
|
||
|
s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3);
|
||
|
|
||
|
if (!host->is2440)
|
||
|
mci_con |= S3C2410_SDICON_FIFORESET;
|
||
|
|
||
|
break;
|
||
|
|
||
|
case MMC_POWER_OFF:
|
||
|
default:
|
||
|
s3c2410_gpio_setpin(S3C2410_GPE5, 0);
|
||
|
s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
|
||
|
|
||
|
if (host->is2440)
|
||
|
mci_con |= S3C2440_SDICON_SDRESET;
|
||
|
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* Set clock */
|
||
|
for (mci_psc = 0; mci_psc < 255; mci_psc++) {
|
||
|
host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1));
|
||
|
|
||
|
if (host->real_rate <= ios->clock)
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (mci_psc > 255)
|
||
|
mci_psc = 255;
|
||
|
|
||
|
host->prescaler = mci_psc;
|
||
|
writel(host->prescaler, host->base + S3C2410_SDIPRE);
|
||
|
|
||
|
/* If requested clock is 0, real_rate will be 0, too */
|
||
|
if (ios->clock == 0)
|
||
|
host->real_rate = 0;
|
||
|
|
||
|
/* Set CLOCK_ENABLE */
|
||
|
if (ios->clock)
|
||
|
mci_con |= S3C2410_SDICON_CLOCKTYPE;
|
||
|
else
|
||
|
mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
|
||
|
|
||
|
writel(mci_con, host->base + S3C2410_SDICON);
|
||
|
|
||
|
if ((ios->power_mode == MMC_POWER_ON) ||
|
||
|
(ios->power_mode == MMC_POWER_UP)) {
|
||
|
dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
|
||
|
host->real_rate/1000, ios->clock/1000);
|
||
|
} else {
|
||
|
dbg(host, dbg_conf, "powered down.\n");
|
||
|
}
|
||
|
|
||
|
host->bus_width = ios->bus_width;
|
||
|
}
|
||
|
|
||
|
static void s3cmci_reset(struct s3cmci_host *host)
|
||
|
{
|
||
|
u32 con = readl(host->base + S3C2410_SDICON);
|
||
|
|
||
|
con |= S3C2440_SDICON_SDRESET;
|
||
|
writel(con, host->base + S3C2410_SDICON);
|
||
|
}
|
||
|
|
||
|
static struct mmc_host_ops s3cmci_ops = {
|
||
|
.request = s3cmci_request,
|
||
|
.set_ios = s3cmci_set_ios,
|
||
|
};
|
||
|
|
||
|
static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
|
||
|
{
|
||
|
struct s3cmci_host *host;
|
||
|
struct mmc_host *mmc;
|
||
|
int ret;
|
||
|
|
||
|
mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
|
||
|
if (!mmc) {
|
||
|
ret = -ENOMEM;
|
||
|
goto probe_out;
|
||
|
}
|
||
|
|
||
|
host = mmc_priv(mmc);
|
||
|
host->mmc = mmc;
|
||
|
host->pdev = pdev;
|
||
|
host->is2440 = is2440;
|
||
|
|
||
|
spin_lock_init(&host->complete_lock);
|
||
|
tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
|
||
|
|
||
|
if (is2440) {
|
||
|
host->sdiimsk = S3C2440_SDIIMSK;
|
||
|
host->sdidata = S3C2440_SDIDATA;
|
||
|
host->clk_div = 1;
|
||
|
} else {
|
||
|
host->sdiimsk = S3C2410_SDIIMSK;
|
||
|
host->sdidata = S3C2410_SDIDATA;
|
||
|
host->clk_div = 2;
|
||
|
}
|
||
|
|
||
|
host->dodma = 0;
|
||
|
host->complete_what = COMPLETION_NONE;
|
||
|
host->pio_active = XFER_NONE;
|
||
|
|
||
|
host->dma = S3CMCI_DMA;
|
||
|
host->irq_cd = IRQ_EINT2;
|
||
|
|
||
|
host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||
|
if (!host->mem) {
|
||
|
dev_err(&pdev->dev,
|
||
|
"failed to get io memory region resouce.\n");
|
||
|
|
||
|
ret = -ENOENT;
|
||
|
goto probe_free_host;
|
||
|
}
|
||
|
|
||
|
host->mem = request_mem_region(host->mem->start,
|
||
|
RESSIZE(host->mem), pdev->name);
|
||
|
|
||
|
if (!host->mem) {
|
||
|
dev_err(&pdev->dev, "failed to request io memory region.\n");
|
||
|
ret = -ENOENT;
|
||
|
goto probe_free_host;
|
||
|
}
|
||
|
|
||
|
host->base = ioremap(host->mem->start, RESSIZE(host->mem));
|
||
|
if (host->base == 0) {
|
||
|
dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
|
||
|
ret = -EINVAL;
|
||
|
goto probe_free_mem_region;
|
||
|
}
|
||
|
|
||
|
host->irq = platform_get_irq(pdev, 0);
|
||
|
if (host->irq == 0) {
|
||
|
dev_err(&pdev->dev, "failed to get interrupt resouce.\n");
|
||
|
ret = -EINVAL;
|
||
|
goto probe_iounmap;
|
||
|
}
|
||
|
|
||
|
if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) {
|
||
|
dev_err(&pdev->dev, "failed to request mci interrupt.\n");
|
||
|
ret = -ENOENT;
|
||
|
goto probe_iounmap;
|
||
|
}
|
||
|
|
||
|
/* We get spurious interrupts even when we have set the IMSK
|
||
|
* register to ignore everything, so use disable_irq() to make
|
||
|
* ensure we don't lock the system with un-serviceable requests. */
|
||
|
|
||
|
disable_irq(host->irq);
|
||
|
|
||
|
s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_EINT2);
|
||
|
set_irq_type(host->irq_cd, IRQT_BOTHEDGE);
|
||
|
|
||
|
if (request_irq(host->irq_cd, s3cmci_irq_cd, 0, DRIVER_NAME, host)) {
|
||
|
dev_err(&pdev->dev,
|
||
|
"failed to request card detect interrupt.\n");
|
||
|
ret = -ENOENT;
|
||
|
goto probe_free_irq;
|
||
|
}
|
||
|
|
||
|
if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL)) {
|
||
|
dev_err(&pdev->dev, "unable to get DMA channel.\n");
|
||
|
ret = -EBUSY;
|
||
|
goto probe_free_irq_cd;
|
||
|
}
|
||
|
|
||
|
host->clk = clk_get(&pdev->dev, "sdi");
|
||
|
if (IS_ERR(host->clk)) {
|
||
|
dev_err(&pdev->dev, "failed to find clock source.\n");
|
||
|
ret = PTR_ERR(host->clk);
|
||
|
host->clk = NULL;
|
||
|
goto probe_free_host;
|
||
|
}
|
||
|
|
||
|
ret = clk_enable(host->clk);
|
||
|
if (ret) {
|
||
|
dev_err(&pdev->dev, "failed to enable clock source.\n");
|
||
|
goto clk_free;
|
||
|
}
|
||
|
|
||
|
host->clk_rate = clk_get_rate(host->clk);
|
||
|
|
||
|
mmc->ops = &s3cmci_ops;
|
||
|
mmc->ocr_avail = MMC_VDD_32_33;
|
||
|
mmc->caps = MMC_CAP_4_BIT_DATA;
|
||
|
mmc->f_min = host->clk_rate / (host->clk_div * 256);
|
||
|
mmc->f_max = host->clk_rate / host->clk_div;
|
||
|
|
||
|
mmc->max_blk_count = 4095;
|
||
|
mmc->max_blk_size = 4095;
|
||
|
mmc->max_req_size = 4095 * 512;
|
||
|
mmc->max_seg_size = mmc->max_req_size;
|
||
|
|
||
|
mmc->max_phys_segs = 128;
|
||
|
mmc->max_hw_segs = 128;
|
||
|
|
||
|
dbg(host, dbg_debug,
|
||
|
"probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n",
|
||
|
(host->is2440?"2440":""),
|
||
|
host->base, host->irq, host->irq_cd, host->dma);
|
||
|
|
||
|
ret = mmc_add_host(mmc);
|
||
|
if (ret) {
|
||
|
dev_err(&pdev->dev, "failed to add mmc host.\n");
|
||
|
goto free_dmabuf;
|
||
|
}
|
||
|
|
||
|
platform_set_drvdata(pdev, mmc);
|
||
|
dev_info(&pdev->dev, "initialisation done.\n");
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
free_dmabuf:
|
||
|
clk_disable(host->clk);
|
||
|
|
||
|
clk_free:
|
||
|
clk_put(host->clk);
|
||
|
|
||
|
probe_free_irq_cd:
|
||
|
free_irq(host->irq_cd, host);
|
||
|
|
||
|
probe_free_irq:
|
||
|
free_irq(host->irq, host);
|
||
|
|
||
|
probe_iounmap:
|
||
|
iounmap(host->base);
|
||
|
|
||
|
probe_free_mem_region:
|
||
|
release_mem_region(host->mem->start, RESSIZE(host->mem));
|
||
|
|
||
|
probe_free_host:
|
||
|
mmc_free_host(mmc);
|
||
|
probe_out:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int __devexit s3cmci_remove(struct platform_device *pdev)
|
||
|
{
|
||
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
||
|
struct s3cmci_host *host = mmc_priv(mmc);
|
||
|
|
||
|
mmc_remove_host(mmc);
|
||
|
|
||
|
clk_disable(host->clk);
|
||
|
clk_put(host->clk);
|
||
|
|
||
|
tasklet_disable(&host->pio_tasklet);
|
||
|
|
||
|
free_irq(host->irq_cd, host);
|
||
|
free_irq(host->irq, host);
|
||
|
|
||
|
iounmap(host->base);
|
||
|
release_mem_region(host->mem->start, RESSIZE(host->mem));
|
||
|
|
||
|
mmc_free_host(mmc);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int __devinit s3cmci_probe_2410(struct platform_device *dev)
|
||
|
{
|
||
|
return s3cmci_probe(dev, 0);
|
||
|
}
|
||
|
|
||
|
static int __devinit s3cmci_probe_2412(struct platform_device *dev)
|
||
|
{
|
||
|
return s3cmci_probe(dev, 1);
|
||
|
}
|
||
|
|
||
|
static int __devinit s3cmci_probe_2440(struct platform_device *dev)
|
||
|
{
|
||
|
return s3cmci_probe(dev, 1);
|
||
|
}
|
||
|
|
||
|
#ifdef CONFIG_PM
|
||
|
|
||
|
static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
|
||
|
{
|
||
|
struct mmc_host *mmc = platform_get_drvdata(dev);
|
||
|
|
||
|
return mmc_suspend_host(mmc, state);
|
||
|
}
|
||
|
|
||
|
static int s3cmci_resume(struct platform_device *dev)
|
||
|
{
|
||
|
struct mmc_host *mmc = platform_get_drvdata(dev);
|
||
|
|
||
|
return mmc_resume_host(mmc);
|
||
|
}
|
||
|
|
||
|
#else /* CONFIG_PM */
|
||
|
#define s3cmci_suspend NULL
|
||
|
#define s3cmci_resume NULL
|
||
|
#endif /* CONFIG_PM */
|
||
|
|
||
|
|
||
|
static struct platform_driver s3cmci_driver_2410 = {
|
||
|
.driver.name = "s3c2410-sdi",
|
||
|
.driver.owner = THIS_MODULE,
|
||
|
.probe = s3cmci_probe_2410,
|
||
|
.remove = __devexit_p(s3cmci_remove),
|
||
|
.suspend = s3cmci_suspend,
|
||
|
.resume = s3cmci_resume,
|
||
|
};
|
||
|
|
||
|
static struct platform_driver s3cmci_driver_2412 = {
|
||
|
.driver.name = "s3c2412-sdi",
|
||
|
.driver.owner = THIS_MODULE,
|
||
|
.probe = s3cmci_probe_2412,
|
||
|
.remove = __devexit_p(s3cmci_remove),
|
||
|
.suspend = s3cmci_suspend,
|
||
|
.resume = s3cmci_resume,
|
||
|
};
|
||
|
|
||
|
static struct platform_driver s3cmci_driver_2440 = {
|
||
|
.driver.name = "s3c2440-sdi",
|
||
|
.driver.owner = THIS_MODULE,
|
||
|
.probe = s3cmci_probe_2440,
|
||
|
.remove = __devexit_p(s3cmci_remove),
|
||
|
.suspend = s3cmci_suspend,
|
||
|
.resume = s3cmci_resume,
|
||
|
};
|
||
|
|
||
|
|
||
|
static int __init s3cmci_init(void)
|
||
|
{
|
||
|
platform_driver_register(&s3cmci_driver_2410);
|
||
|
platform_driver_register(&s3cmci_driver_2412);
|
||
|
platform_driver_register(&s3cmci_driver_2440);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void __exit s3cmci_exit(void)
|
||
|
{
|
||
|
platform_driver_unregister(&s3cmci_driver_2410);
|
||
|
platform_driver_unregister(&s3cmci_driver_2412);
|
||
|
platform_driver_unregister(&s3cmci_driver_2440);
|
||
|
}
|
||
|
|
||
|
module_init(s3cmci_init);
|
||
|
module_exit(s3cmci_exit);
|
||
|
|
||
|
MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
|
||
|
MODULE_LICENSE("GPL v2");
|
||
|
MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>");
|