linux/drivers/gpu/drm/i915/intel_guc_fw.c

288 lines
8.8 KiB
C
Raw Normal View History

/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Vinit Azad <vinit.azad@intel.com>
* Ben Widawsky <ben@bwidawsk.net>
* Dave Gordon <david.s.gordon@intel.com>
* Alex Dai <yu.dai@intel.com>
*/
#include "intel_guc_fw.h"
#include "i915_drv.h"
#define SKL_FW_MAJOR 6
#define SKL_FW_MINOR 1
#define BXT_FW_MAJOR 8
#define BXT_FW_MINOR 7
#define KBL_FW_MAJOR 9
#define KBL_FW_MINOR 14
#define GLK_FW_MAJOR 10
#define GLK_FW_MINOR 56
#define GUC_FW_PATH(platform, major, minor) \
"i915/" __stringify(platform) "_guc_ver" __stringify(major) "_" __stringify(minor) ".bin"
#define I915_SKL_GUC_UCODE GUC_FW_PATH(skl, SKL_FW_MAJOR, SKL_FW_MINOR)
MODULE_FIRMWARE(I915_SKL_GUC_UCODE);
#define I915_BXT_GUC_UCODE GUC_FW_PATH(bxt, BXT_FW_MAJOR, BXT_FW_MINOR)
MODULE_FIRMWARE(I915_BXT_GUC_UCODE);
#define I915_KBL_GUC_UCODE GUC_FW_PATH(kbl, KBL_FW_MAJOR, KBL_FW_MINOR)
MODULE_FIRMWARE(I915_KBL_GUC_UCODE);
#define I915_GLK_GUC_UCODE GUC_FW_PATH(glk, GLK_FW_MAJOR, GLK_FW_MINOR)
/**
* intel_guc_fw_select() - selects GuC firmware for uploading
*
* @guc: intel_guc struct
*
* Return: zero when we know firmware, non-zero in other case
*/
int intel_guc_fw_select(struct intel_guc *guc)
{
struct drm_i915_private *dev_priv = guc_to_i915(guc);
intel_uc_fw_init(&guc->fw, INTEL_UC_FW_TYPE_GUC);
if (i915_modparams.guc_firmware_path) {
guc->fw.path = i915_modparams.guc_firmware_path;
guc->fw.major_ver_wanted = 0;
guc->fw.minor_ver_wanted = 0;
} else if (IS_SKYLAKE(dev_priv)) {
guc->fw.path = I915_SKL_GUC_UCODE;
guc->fw.major_ver_wanted = SKL_FW_MAJOR;
guc->fw.minor_ver_wanted = SKL_FW_MINOR;
} else if (IS_BROXTON(dev_priv)) {
guc->fw.path = I915_BXT_GUC_UCODE;
guc->fw.major_ver_wanted = BXT_FW_MAJOR;
guc->fw.minor_ver_wanted = BXT_FW_MINOR;
} else if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) {
guc->fw.path = I915_KBL_GUC_UCODE;
guc->fw.major_ver_wanted = KBL_FW_MAJOR;
guc->fw.minor_ver_wanted = KBL_FW_MINOR;
} else if (IS_GEMINILAKE(dev_priv)) {
guc->fw.path = I915_GLK_GUC_UCODE;
guc->fw.major_ver_wanted = GLK_FW_MAJOR;
guc->fw.minor_ver_wanted = GLK_FW_MINOR;
} else {
DRM_ERROR("No GuC firmware known for platform with GuC!\n");
return -ENOENT;
}
return 0;
}
static void guc_prepare_xfer(struct intel_guc *guc)
{
struct drm_i915_private *dev_priv = guc_to_i915(guc);
/* Must program this register before loading the ucode with DMA */
I915_WRITE(GUC_SHIM_CONTROL, GUC_DISABLE_SRAM_INIT_TO_ZEROES |
GUC_ENABLE_READ_CACHE_LOGIC |
GUC_ENABLE_MIA_CACHING |
GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA |
GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA |
GUC_ENABLE_MIA_CLOCK_GATING);
if (IS_GEN9_LP(dev_priv))
I915_WRITE(GEN9LP_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
else
I915_WRITE(GEN9_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
if (IS_GEN9(dev_priv)) {
/* DOP Clock Gating Enable for GuC clocks */
I915_WRITE(GEN7_MISCCPCTL, (GEN8_DOP_CLOCK_GATE_GUC_ENABLE |
I915_READ(GEN7_MISCCPCTL)));
/* allows for 5us (in 10ns units) before GT can go to RC6 */
I915_WRITE(GUC_ARAT_C6DIS, 0x1FF);
}
}
/* Copy RSA signature from the fw image to HW for verification */
static int guc_xfer_rsa(struct intel_guc *guc, struct i915_vma *vma)
{
struct drm_i915_private *dev_priv = guc_to_i915(guc);
struct intel_uc_fw *guc_fw = &guc->fw;
struct sg_table *sg = vma->pages;
u32 rsa[UOS_RSA_SCRATCH_MAX_COUNT];
int i;
if (sg_pcopy_to_buffer(sg->sgl, sg->nents, rsa, sizeof(rsa),
guc_fw->rsa_offset) != sizeof(rsa))
return -EINVAL;
for (i = 0; i < UOS_RSA_SCRATCH_MAX_COUNT; i++)
I915_WRITE(UOS_RSA_SCRATCH(i), rsa[i]);
return 0;
}
/*
* Transfer the firmware image to RAM for execution by the microcontroller.
*
* Architecturally, the DMA engine is bidirectional, and can potentially even
* transfer between GTT locations. This functionality is left out of the API
* for now as there is no need for it.
*/
static int guc_xfer_ucode(struct intel_guc *guc, struct i915_vma *vma)
{
struct drm_i915_private *dev_priv = guc_to_i915(guc);
struct intel_uc_fw *guc_fw = &guc->fw;
unsigned long offset;
u32 status;
int ret;
/*
* The header plus uCode will be copied to WOPCM via DMA, excluding any
* other components
*/
I915_WRITE(DMA_COPY_SIZE, guc_fw->header_size + guc_fw->ucode_size);
/* Set the source address for the new blob */
offset = guc_ggtt_offset(vma) + guc_fw->header_offset;
I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
/*
* Set the DMA destination. Current uCode expects the code to be
* loaded at 8k; locations below this are used for the stack.
*/
I915_WRITE(DMA_ADDR_1_LOW, 0x2000);
I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
/* Finally start the DMA */
I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
/* Wait for DMA to finish */
ret = __intel_wait_for_register_fw(dev_priv, DMA_CTRL, START_DMA, 0,
2, 100, &status);
DRM_DEBUG_DRIVER("GuC DMA status %#x\n", status);
return ret;
}
/*
* Read the GuC status register (GUC_STATUS) and store it in the
* specified location; then return a boolean indicating whether
* the value matches either of two values representing completion
* of the GuC boot process.
*
* This is used for polling the GuC status in a wait_for()
* loop below.
*/
static inline bool guc_ready(struct intel_guc *guc, u32 *status)
{
struct drm_i915_private *dev_priv = guc_to_i915(guc);
u32 val = I915_READ(GUC_STATUS);
u32 uk_val = val & GS_UKERNEL_MASK;
*status = val;
return (uk_val == GS_UKERNEL_READY) ||
((val & GS_MIA_CORE_STATE) && (uk_val == GS_UKERNEL_LAPIC_DONE));
}
static int guc_wait_ucode(struct intel_guc *guc)
{
u32 status;
int ret;
/*
* Wait for the GuC to start up.
* NB: Docs recommend not using the interrupt for completion.
* Measurements indicate this should take no more than 20ms, so a
* timeout here indicates that the GuC has failed and is unusable.
* (Higher levels of the driver will attempt to fall back to
* execlist mode if this happens.)
*/
ret = wait_for(guc_ready(guc, &status), 100);
DRM_DEBUG_DRIVER("GuC status %#x\n", status);
if ((status & GS_BOOTROM_MASK) == GS_BOOTROM_RSA_FAILED) {
DRM_ERROR("GuC firmware signature verification failed\n");
ret = -ENOEXEC;
}
return ret;
}
/*
* Load the GuC firmware blob into the MinuteIA.
*/
static int guc_fw_xfer(struct intel_uc_fw *guc_fw, struct i915_vma *vma)
{
struct intel_guc *guc = container_of(guc_fw, struct intel_guc, fw);
struct drm_i915_private *dev_priv = guc_to_i915(guc);
int ret;
GEM_BUG_ON(guc_fw->type != INTEL_UC_FW_TYPE_GUC);
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
guc_prepare_xfer(guc);
/*
* Note that GuC needs the CSS header plus uKernel code to be copied
* by the DMA engine in one operation, whereas the RSA signature is
* loaded via MMIO.
*/
ret = guc_xfer_rsa(guc, vma);
if (ret)
DRM_WARN("GuC firmware signature xfer error %d\n", ret);
ret = guc_xfer_ucode(guc, vma);
if (ret)
DRM_WARN("GuC firmware code xfer error %d\n", ret);
ret = guc_wait_ucode(guc);
if (ret)
DRM_ERROR("GuC firmware xfer error %d\n", ret);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
return ret;
}
/**
* intel_guc_fw_upload() - finish preparing the GuC for activity
* @guc: intel_guc structure
*
* Called during driver loading and also after a GPU reset.
*
* The main action required here it to load the GuC uCode into the device.
* The firmware image should have already been fetched into memory by the
* earlier call to intel_guc_init(), so here we need only check that
* worked, and then transfer the image to the h/w.
*
* Return: non-zero code on error
*/
int intel_guc_fw_upload(struct intel_guc *guc)
{
return intel_uc_fw_upload(&guc->fw, guc_fw_xfer);
}