linux/arch/powerpc/include/asm/irqflags.h

64 lines
1.5 KiB
C
Raw Normal View History

/*
* IRQ flags handling
*/
#ifndef _ASM_IRQFLAGS_H
#define _ASM_IRQFLAGS_H
#ifndef __ASSEMBLY__
/*
Fix IRQ flag handling naming Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
2010-10-07 13:08:55 +00:00
* Get definitions for arch_local_save_flags(x), etc.
*/
#include <asm/hw_irq.h>
#else
#ifdef CONFIG_TRACE_IRQFLAGS
powerpc/ppc64/tracing: Add stack frame to calls of trace_hardirqs_on/off When an interrupt occurs in userspace, we can call trace_hardirqs_on/off() With one level stack. But if we have irqsoff tracing enabled, it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call goes two stack frames up. If this is from user space, then there may not exist a second stack. Add a second stack when calling trace_hardirqs_on/off() otherwise the following oops might occur: Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=2 PA Semi PWRficient last sysfs file: /sys/block/sda/size Modules linked in: ohci_hcd ehci_hcd usbcore NIP: c0000000000e1c00 LR: c0000000000034d4 CTR: 000000011012c440 REGS: c00000003e2f3af0 TRAP: 0300 Not tainted (2.6.37-rc6+) MSR: 9000000000001032 <ME,IR,DR> CR: 48044444 XER: 20000000 DAR: 00000001ffb9db50, DSISR: 0000000040000000 TASK = c00000003e1a00a0[2088] 'emacs' THREAD: c00000003e2f0000 CPU: 1 GPR00: 0000000000000001 c00000003e2f3d70 c00000000084e0d0 c0000000008816e8 GPR04: 000000001034c678 000000001032e8f9 0000000010336540 0000000040020000 GPR08: 0000000040020000 00000001ffb9db40 c00000003e2f3e30 0000000060000000 GPR12: 100000000000f032 c00000000fff0280 000000001032e8c9 0000000000000008 GPR16: 00000000105be9c0 00000000105be950 00000000105be9b0 00000000105be950 GPR20: 00000000ffb9dc50 00000000ffb9dbf0 00000000102f0000 00000000102f0000 GPR24: 00000000102e0000 00000000102f0000 0000000010336540 c0000000009ded38 GPR28: 00000000102e0000 c0000000000034d4 c0000000007ccb10 c00000003e2f3d70 NIP [c0000000000e1c00] .trace_hardirqs_off+0xb0/0x1d0 LR [c0000000000034d4] decrementer_common+0xd4/0x100 Call Trace: [c00000003e2f3d70] [c00000003e2f3e30] 0xc00000003e2f3e30 (unreliable) [c00000003e2f3e30] [c0000000000034d4] decrementer_common+0xd4/0x100 Instruction dump: 81690000 7f8b0000 419e0018 f84a0028 60000000 60000000 60000000 e95f0000 80030000 e92a0000 eb6301f8 2f800000 <eb890010> 41fe00dc a06d000a eb1e8050 ---[ end trace 4ec7fd2be9240928 ]--- Reported-by: Joerg Sommer <joerg@alea.gnuu.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-12-23 19:46:06 +00:00
#ifdef CONFIG_IRQSOFF_TRACER
/*
* Since the ftrace irqsoff latency trace checks CALLER_ADDR1,
* which is the stack frame here, we need to force a stack frame
* in case we came from user space.
*/
#define TRACE_WITH_FRAME_BUFFER(func) \
mflr r0; \
stdu r1, -32(r1); \
std r0, 16(r1); \
stdu r1, -32(r1); \
bl func; \
ld r1, 0(r1); \
ld r1, 0(r1);
#else
#define TRACE_WITH_FRAME_BUFFER(func) \
bl func;
#endif
/*
* Most of the CPU's IRQ-state tracing is done from assembly code; we
* have to call a C function so call a wrapper that saves all the
* C-clobbered registers.
*/
powerpc/ppc64/tracing: Add stack frame to calls of trace_hardirqs_on/off When an interrupt occurs in userspace, we can call trace_hardirqs_on/off() With one level stack. But if we have irqsoff tracing enabled, it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call goes two stack frames up. If this is from user space, then there may not exist a second stack. Add a second stack when calling trace_hardirqs_on/off() otherwise the following oops might occur: Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=2 PA Semi PWRficient last sysfs file: /sys/block/sda/size Modules linked in: ohci_hcd ehci_hcd usbcore NIP: c0000000000e1c00 LR: c0000000000034d4 CTR: 000000011012c440 REGS: c00000003e2f3af0 TRAP: 0300 Not tainted (2.6.37-rc6+) MSR: 9000000000001032 <ME,IR,DR> CR: 48044444 XER: 20000000 DAR: 00000001ffb9db50, DSISR: 0000000040000000 TASK = c00000003e1a00a0[2088] 'emacs' THREAD: c00000003e2f0000 CPU: 1 GPR00: 0000000000000001 c00000003e2f3d70 c00000000084e0d0 c0000000008816e8 GPR04: 000000001034c678 000000001032e8f9 0000000010336540 0000000040020000 GPR08: 0000000040020000 00000001ffb9db40 c00000003e2f3e30 0000000060000000 GPR12: 100000000000f032 c00000000fff0280 000000001032e8c9 0000000000000008 GPR16: 00000000105be9c0 00000000105be950 00000000105be9b0 00000000105be950 GPR20: 00000000ffb9dc50 00000000ffb9dbf0 00000000102f0000 00000000102f0000 GPR24: 00000000102e0000 00000000102f0000 0000000010336540 c0000000009ded38 GPR28: 00000000102e0000 c0000000000034d4 c0000000007ccb10 c00000003e2f3d70 NIP [c0000000000e1c00] .trace_hardirqs_off+0xb0/0x1d0 LR [c0000000000034d4] decrementer_common+0xd4/0x100 Call Trace: [c00000003e2f3d70] [c00000003e2f3e30] 0xc00000003e2f3e30 (unreliable) [c00000003e2f3e30] [c0000000000034d4] decrementer_common+0xd4/0x100 Instruction dump: 81690000 7f8b0000 419e0018 f84a0028 60000000 60000000 60000000 e95f0000 80030000 e92a0000 eb6301f8 2f800000 <eb890010> 41fe00dc a06d000a eb1e8050 ---[ end trace 4ec7fd2be9240928 ]--- Reported-by: Joerg Sommer <joerg@alea.gnuu.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-12-23 19:46:06 +00:00
#define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on)
#define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off)
#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \
cmpdi en,0; \
bne 95f; \
stb en,PACASOFTIRQEN(r13); \
TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off) \
b skip; \
95: TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on) \
li en,1;
#define TRACE_AND_RESTORE_IRQ(en) \
TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \
powerpc/ppc64/tracing: Add stack frame to calls of trace_hardirqs_on/off When an interrupt occurs in userspace, we can call trace_hardirqs_on/off() With one level stack. But if we have irqsoff tracing enabled, it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call goes two stack frames up. If this is from user space, then there may not exist a second stack. Add a second stack when calling trace_hardirqs_on/off() otherwise the following oops might occur: Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=2 PA Semi PWRficient last sysfs file: /sys/block/sda/size Modules linked in: ohci_hcd ehci_hcd usbcore NIP: c0000000000e1c00 LR: c0000000000034d4 CTR: 000000011012c440 REGS: c00000003e2f3af0 TRAP: 0300 Not tainted (2.6.37-rc6+) MSR: 9000000000001032 <ME,IR,DR> CR: 48044444 XER: 20000000 DAR: 00000001ffb9db50, DSISR: 0000000040000000 TASK = c00000003e1a00a0[2088] 'emacs' THREAD: c00000003e2f0000 CPU: 1 GPR00: 0000000000000001 c00000003e2f3d70 c00000000084e0d0 c0000000008816e8 GPR04: 000000001034c678 000000001032e8f9 0000000010336540 0000000040020000 GPR08: 0000000040020000 00000001ffb9db40 c00000003e2f3e30 0000000060000000 GPR12: 100000000000f032 c00000000fff0280 000000001032e8c9 0000000000000008 GPR16: 00000000105be9c0 00000000105be950 00000000105be9b0 00000000105be950 GPR20: 00000000ffb9dc50 00000000ffb9dbf0 00000000102f0000 00000000102f0000 GPR24: 00000000102e0000 00000000102f0000 0000000010336540 c0000000009ded38 GPR28: 00000000102e0000 c0000000000034d4 c0000000007ccb10 c00000003e2f3d70 NIP [c0000000000e1c00] .trace_hardirqs_off+0xb0/0x1d0 LR [c0000000000034d4] decrementer_common+0xd4/0x100 Call Trace: [c00000003e2f3d70] [c00000003e2f3e30] 0xc00000003e2f3e30 (unreliable) [c00000003e2f3e30] [c0000000000034d4] decrementer_common+0xd4/0x100 Instruction dump: 81690000 7f8b0000 419e0018 f84a0028 60000000 60000000 60000000 e95f0000 80030000 e92a0000 eb6301f8 2f800000 <eb890010> 41fe00dc a06d000a eb1e8050 ---[ end trace 4ec7fd2be9240928 ]--- Reported-by: Joerg Sommer <joerg@alea.gnuu.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-12-23 19:46:06 +00:00
stb en,PACASOFTIRQEN(r13); \
96:
#else
#define TRACE_ENABLE_INTS
#define TRACE_DISABLE_INTS
#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
#define TRACE_AND_RESTORE_IRQ(en) \
stb en,PACASOFTIRQEN(r13)
#endif
#endif
#endif