leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
bb176f6709
linux/drivers/iio/proximity/Makefile

11 lines
295 B
Makefile
Raw Normal View History

iio: Add AS3935 lightning sensor support AS3935 chipset can detect lightning strikes and reports those back as events and the estimated distance to the storm. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-03 12:53:00 +00:00
#
# Makefile for IIO proximity sensors
#
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AS3935) += as3935.o
iio: proximity: add support for PulsedLight LIDAR Add support for the PulsedLight LIDAR rangefinder sensor which allows high speed (over 300Hz) distance measurements using Barker Coding within 40 meter range. Support only tested on the "blue label" rev 2, but may work using low sample frequencies on the original version. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-18 14:40:38 +00:00
obj-$(CONFIG_LIDAR_LITE_V2) += pulsedlight-lidar-lite-v2.o
iio: distance: add devantech us ranger srf04 This patch adds support for the ultrasonic ranger srf04 of devantech. This device is measuring the distance of objects in a range between 1 cm and 3 meters and a theoretical resolution of 3 mm. There are two GPIOs used: - trigger: set as output to the device when the measurement should start - echo: set by the device when the ultrasonic wave is sent out and reset when the echo is recognized; this needs to be an interrupt input The time between setting and resetting the echo pin is the time the waveform needed for one round trip. This time is recorded in the interrupt handler. The distance is calculated in the read function by using the ultrasonic speed at 20 degrees celsius which is about 343 m/s. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-31 18:03:45 +00:00
obj-$(CONFIG_SRF04) += srf04.o
iio: distance: srf08: add IIO driver for us ranger This is the IIO driver for devantech srf08 ultrasonic ranger which can be used to measure the distances to an object. The sensor supports I2C with some registers. Supported Features include: - read the distance in ranging mode in centimeters - output of the driver is directly the read value - together with the scale the driver delivers the distance in meters - only the first echo of the nearest object is delivered - set sensitivity as analog value in the range of 0-31 means setting gain register on device - set range registers; userspace enters max. range in millimeters in 43 mm steps Features not supported by this driver: - ranging mode in inches or in microseconds - ANN mode - change I2C address through this driver - light sensor The driver was added in the directory "proximity" of the iio subsystem and the menu in den config is now called "Proximity and distance sensors" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-25 19:07:19 +00:00
obj-$(CONFIG_SRF08) += srf08.o
iio: driver for Semtech SX9500 proximity solution Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-29 12:41:14 +00:00
obj-$(CONFIG_SX9500) += sx9500.o
Reference in New Issue Copy Permalink