linux/drivers/scsi/ufs/ufshcd-pltfrm.c

414 lines
10 KiB
C
Raw Normal View History

/*
* Universal Flash Storage Host controller Platform bus based glue driver
*
* This code is based on drivers/scsi/ufs/ufshcd-pltfrm.c
* Copyright (C) 2011-2013 Samsung India Software Operations
*
* Authors:
* Santosh Yaraganavi <santosh.sy@samsung.com>
* Vinayak Holikatti <h.vinayak@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* See the COPYING file in the top-level directory or visit
* <http://www.gnu.org/licenses/gpl-2.0.html>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* This program is provided "AS IS" and "WITH ALL FAULTS" and
* without warranty of any kind. You are solely responsible for
* determining the appropriateness of using and distributing
* the program and assume all risks associated with your exercise
* of rights with respect to the program, including but not limited
* to infringement of third party rights, the risks and costs of
* program errors, damage to or loss of data, programs or equipment,
* and unavailability or interruption of operations. Under no
* circumstances will the contributor of this Program be liable for
* any damages of any kind arising from your use or distribution of
* this program.
*/
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include "ufshcd.h"
static const struct of_device_id ufs_of_match[];
static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev)
{
if (dev->of_node) {
const struct of_device_id *match;
match = of_match_node(ufs_of_match, dev->of_node);
if (match)
return (struct ufs_hba_variant_ops *)match->data;
}
return NULL;
}
static int ufshcd_parse_clock_info(struct ufs_hba *hba)
{
int ret = 0;
int cnt;
int i;
struct device *dev = hba->dev;
struct device_node *np = dev->of_node;
char *name;
u32 *clkfreq = NULL;
struct ufs_clk_info *clki;
int len = 0;
size_t sz = 0;
if (!np)
goto out;
INIT_LIST_HEAD(&hba->clk_list_head);
cnt = of_property_count_strings(np, "clock-names");
if (!cnt || (cnt == -EINVAL)) {
dev_info(dev, "%s: Unable to find clocks, assuming enabled\n",
__func__);
} else if (cnt < 0) {
dev_err(dev, "%s: count clock strings failed, err %d\n",
__func__, cnt);
ret = cnt;
}
if (cnt <= 0)
goto out;
if (!of_get_property(np, "freq-table-hz", &len)) {
dev_info(dev, "freq-table-hz property not specified\n");
goto out;
}
if (len <= 0)
goto out;
sz = len / sizeof(*clkfreq);
if (sz != 2 * cnt) {
dev_err(dev, "%s len mismatch\n", "freq-table-hz");
ret = -EINVAL;
goto out;
}
clkfreq = devm_kzalloc(dev, sz * sizeof(*clkfreq),
GFP_KERNEL);
if (!clkfreq) {
dev_err(dev, "%s: no memory\n", "freq-table-hz");
ret = -ENOMEM;
goto out;
}
ret = of_property_read_u32_array(np, "freq-table-hz",
clkfreq, sz);
if (ret && (ret != -EINVAL)) {
dev_err(dev, "%s: error reading array %d\n",
"freq-table-hz", ret);
goto free_clkfreq;
}
for (i = 0; i < sz; i += 2) {
ret = of_property_read_string_index(np,
"clock-names", i/2, (const char **)&name);
if (ret)
goto free_clkfreq;
clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL);
if (!clki) {
ret = -ENOMEM;
goto free_clkfreq;
}
clki->min_freq = clkfreq[i];
clki->max_freq = clkfreq[i+1];
clki->name = kstrdup(name, GFP_KERNEL);
dev_dbg(dev, "%s: min %u max %u name %s\n", "freq-table-hz",
clki->min_freq, clki->max_freq, clki->name);
list_add_tail(&clki->list, &hba->clk_list_head);
}
free_clkfreq:
kfree(clkfreq);
out:
return ret;
}
#define MAX_PROP_SIZE 32
static int ufshcd_populate_vreg(struct device *dev, const char *name,
struct ufs_vreg **out_vreg)
{
int ret = 0;
char prop_name[MAX_PROP_SIZE];
struct ufs_vreg *vreg = NULL;
struct device_node *np = dev->of_node;
if (!np) {
dev_err(dev, "%s: non DT initialization\n", __func__);
goto out;
}
snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", name);
if (!of_parse_phandle(np, prop_name, 0)) {
dev_info(dev, "%s: Unable to find %s regulator, assuming enabled\n",
__func__, prop_name);
goto out;
}
vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
if (!vreg) {
dev_err(dev, "No memory for %s regulator\n", name);
goto out;
}
vreg->name = kstrdup(name, GFP_KERNEL);
/* if fixed regulator no need further initialization */
snprintf(prop_name, MAX_PROP_SIZE, "%s-fixed-regulator", name);
if (of_property_read_bool(np, prop_name))
goto out;
snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
ret = of_property_read_u32(np, prop_name, &vreg->max_uA);
if (ret) {
dev_err(dev, "%s: unable to find %s err %d\n",
__func__, prop_name, ret);
goto out_free;
}
vreg->min_uA = 0;
if (!strcmp(name, "vcc")) {
if (of_property_read_bool(np, "vcc-supply-1p8")) {
vreg->min_uV = UFS_VREG_VCC_1P8_MIN_UV;
vreg->max_uV = UFS_VREG_VCC_1P8_MAX_UV;
} else {
vreg->min_uV = UFS_VREG_VCC_MIN_UV;
vreg->max_uV = UFS_VREG_VCC_MAX_UV;
}
} else if (!strcmp(name, "vccq")) {
vreg->min_uV = UFS_VREG_VCCQ_MIN_UV;
vreg->max_uV = UFS_VREG_VCCQ_MAX_UV;
} else if (!strcmp(name, "vccq2")) {
vreg->min_uV = UFS_VREG_VCCQ2_MIN_UV;
vreg->max_uV = UFS_VREG_VCCQ2_MAX_UV;
}
goto out;
out_free:
devm_kfree(dev, vreg);
vreg = NULL;
out:
if (!ret)
*out_vreg = vreg;
return ret;
}
/**
* ufshcd_parse_regulator_info - get regulator info from device tree
* @hba: per adapter instance
*
* Get regulator info from device tree for vcc, vccq, vccq2 power supplies.
* If any of the supplies are not defined it is assumed that they are always-on
* and hence return zero. If the property is defined but parsing is failed
* then return corresponding error.
*/
static int ufshcd_parse_regulator_info(struct ufs_hba *hba)
{
int err;
struct device *dev = hba->dev;
struct ufs_vreg_info *info = &hba->vreg_info;
err = ufshcd_populate_vreg(dev, "vdd-hba", &info->vdd_hba);
if (err)
goto out;
err = ufshcd_populate_vreg(dev, "vcc", &info->vcc);
if (err)
goto out;
err = ufshcd_populate_vreg(dev, "vccq", &info->vccq);
if (err)
goto out;
err = ufshcd_populate_vreg(dev, "vccq2", &info->vccq2);
out:
return err;
}
#ifdef CONFIG_PM
/**
* ufshcd_pltfrm_suspend - suspend power management function
* @dev: pointer to device handle
*
ufs: add UFS power management support This patch adds support for UFS device and UniPro link power management during runtime/system PM. Main idea is to define multiple UFS low power levels based on UFS device and UFS link power states. This would allow any specific platform or pci driver to choose the best suited low power level during runtime and system suspend based on their power goals. bkops handlig: To put the UFS device in sleep state when bkops is disabled, first query the bkops status from the device and enable bkops on device only if device needs time to perform the bkops. START_STOP handling: Before sending START_STOP_UNIT to the device well-known logical unit (w-lun) to make sure that the device w-lun unit attention condition is cleared. Write protection: UFS device specification allows LUs to be write protected, either permanently or power on write protected. If any LU is power on write protected and if the card is power cycled (by powering off VCCQ and/or VCC rails), LU's write protect status would be lost. So this means those LUs can be written now. To ensures that UFS device is power cycled only if the power on protect is not set for any of the LUs, check if power on write protect is set and if device is in sleep/power-off state & link in inactive state (Hibern8 or OFF state). If none of the Logical Units on UFS device is power on write protected then all UFS device power rails (VCC, VCCQ & VCCQ2) can be turned off if UFS device is in power-off state and UFS link is in OFF state. But current implementation would disable all device power rails even if UFS link is not in OFF state. Low power mode: If UFS link is in OFF state then UFS host controller can be power collapsed to avoid leakage current from it. Note that if UFS host controller is power collapsed, full UFS reinitialization will be required on resume to re-establish the link between host and device. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25 12:32:30 +00:00
* Returns 0 if successful
* Returns non-zero otherwise
*/
static int ufshcd_pltfrm_suspend(struct device *dev)
{
ufs: add UFS power management support This patch adds support for UFS device and UniPro link power management during runtime/system PM. Main idea is to define multiple UFS low power levels based on UFS device and UFS link power states. This would allow any specific platform or pci driver to choose the best suited low power level during runtime and system suspend based on their power goals. bkops handlig: To put the UFS device in sleep state when bkops is disabled, first query the bkops status from the device and enable bkops on device only if device needs time to perform the bkops. START_STOP handling: Before sending START_STOP_UNIT to the device well-known logical unit (w-lun) to make sure that the device w-lun unit attention condition is cleared. Write protection: UFS device specification allows LUs to be write protected, either permanently or power on write protected. If any LU is power on write protected and if the card is power cycled (by powering off VCCQ and/or VCC rails), LU's write protect status would be lost. So this means those LUs can be written now. To ensures that UFS device is power cycled only if the power on protect is not set for any of the LUs, check if power on write protect is set and if device is in sleep/power-off state & link in inactive state (Hibern8 or OFF state). If none of the Logical Units on UFS device is power on write protected then all UFS device power rails (VCC, VCCQ & VCCQ2) can be turned off if UFS device is in power-off state and UFS link is in OFF state. But current implementation would disable all device power rails even if UFS link is not in OFF state. Low power mode: If UFS link is in OFF state then UFS host controller can be power collapsed to avoid leakage current from it. Note that if UFS host controller is power collapsed, full UFS reinitialization will be required on resume to re-establish the link between host and device. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25 12:32:30 +00:00
return ufshcd_system_suspend(dev_get_drvdata(dev));
}
/**
* ufshcd_pltfrm_resume - resume power management function
* @dev: pointer to device handle
*
ufs: add UFS power management support This patch adds support for UFS device and UniPro link power management during runtime/system PM. Main idea is to define multiple UFS low power levels based on UFS device and UFS link power states. This would allow any specific platform or pci driver to choose the best suited low power level during runtime and system suspend based on their power goals. bkops handlig: To put the UFS device in sleep state when bkops is disabled, first query the bkops status from the device and enable bkops on device only if device needs time to perform the bkops. START_STOP handling: Before sending START_STOP_UNIT to the device well-known logical unit (w-lun) to make sure that the device w-lun unit attention condition is cleared. Write protection: UFS device specification allows LUs to be write protected, either permanently or power on write protected. If any LU is power on write protected and if the card is power cycled (by powering off VCCQ and/or VCC rails), LU's write protect status would be lost. So this means those LUs can be written now. To ensures that UFS device is power cycled only if the power on protect is not set for any of the LUs, check if power on write protect is set and if device is in sleep/power-off state & link in inactive state (Hibern8 or OFF state). If none of the Logical Units on UFS device is power on write protected then all UFS device power rails (VCC, VCCQ & VCCQ2) can be turned off if UFS device is in power-off state and UFS link is in OFF state. But current implementation would disable all device power rails even if UFS link is not in OFF state. Low power mode: If UFS link is in OFF state then UFS host controller can be power collapsed to avoid leakage current from it. Note that if UFS host controller is power collapsed, full UFS reinitialization will be required on resume to re-establish the link between host and device. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25 12:32:30 +00:00
* Returns 0 if successful
* Returns non-zero otherwise
*/
static int ufshcd_pltfrm_resume(struct device *dev)
{
ufs: add UFS power management support This patch adds support for UFS device and UniPro link power management during runtime/system PM. Main idea is to define multiple UFS low power levels based on UFS device and UFS link power states. This would allow any specific platform or pci driver to choose the best suited low power level during runtime and system suspend based on their power goals. bkops handlig: To put the UFS device in sleep state when bkops is disabled, first query the bkops status from the device and enable bkops on device only if device needs time to perform the bkops. START_STOP handling: Before sending START_STOP_UNIT to the device well-known logical unit (w-lun) to make sure that the device w-lun unit attention condition is cleared. Write protection: UFS device specification allows LUs to be write protected, either permanently or power on write protected. If any LU is power on write protected and if the card is power cycled (by powering off VCCQ and/or VCC rails), LU's write protect status would be lost. So this means those LUs can be written now. To ensures that UFS device is power cycled only if the power on protect is not set for any of the LUs, check if power on write protect is set and if device is in sleep/power-off state & link in inactive state (Hibern8 or OFF state). If none of the Logical Units on UFS device is power on write protected then all UFS device power rails (VCC, VCCQ & VCCQ2) can be turned off if UFS device is in power-off state and UFS link is in OFF state. But current implementation would disable all device power rails even if UFS link is not in OFF state. Low power mode: If UFS link is in OFF state then UFS host controller can be power collapsed to avoid leakage current from it. Note that if UFS host controller is power collapsed, full UFS reinitialization will be required on resume to re-establish the link between host and device. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25 12:32:30 +00:00
return ufshcd_system_resume(dev_get_drvdata(dev));
}
#else
#define ufshcd_pltfrm_suspend NULL
#define ufshcd_pltfrm_resume NULL
#endif
#ifdef CONFIG_PM_RUNTIME
static int ufshcd_pltfrm_runtime_suspend(struct device *dev)
{
ufs: add UFS power management support This patch adds support for UFS device and UniPro link power management during runtime/system PM. Main idea is to define multiple UFS low power levels based on UFS device and UFS link power states. This would allow any specific platform or pci driver to choose the best suited low power level during runtime and system suspend based on their power goals. bkops handlig: To put the UFS device in sleep state when bkops is disabled, first query the bkops status from the device and enable bkops on device only if device needs time to perform the bkops. START_STOP handling: Before sending START_STOP_UNIT to the device well-known logical unit (w-lun) to make sure that the device w-lun unit attention condition is cleared. Write protection: UFS device specification allows LUs to be write protected, either permanently or power on write protected. If any LU is power on write protected and if the card is power cycled (by powering off VCCQ and/or VCC rails), LU's write protect status would be lost. So this means those LUs can be written now. To ensures that UFS device is power cycled only if the power on protect is not set for any of the LUs, check if power on write protect is set and if device is in sleep/power-off state & link in inactive state (Hibern8 or OFF state). If none of the Logical Units on UFS device is power on write protected then all UFS device power rails (VCC, VCCQ & VCCQ2) can be turned off if UFS device is in power-off state and UFS link is in OFF state. But current implementation would disable all device power rails even if UFS link is not in OFF state. Low power mode: If UFS link is in OFF state then UFS host controller can be power collapsed to avoid leakage current from it. Note that if UFS host controller is power collapsed, full UFS reinitialization will be required on resume to re-establish the link between host and device. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25 12:32:30 +00:00
return ufshcd_runtime_suspend(dev_get_drvdata(dev));
}
static int ufshcd_pltfrm_runtime_resume(struct device *dev)
{
ufs: add UFS power management support This patch adds support for UFS device and UniPro link power management during runtime/system PM. Main idea is to define multiple UFS low power levels based on UFS device and UFS link power states. This would allow any specific platform or pci driver to choose the best suited low power level during runtime and system suspend based on their power goals. bkops handlig: To put the UFS device in sleep state when bkops is disabled, first query the bkops status from the device and enable bkops on device only if device needs time to perform the bkops. START_STOP handling: Before sending START_STOP_UNIT to the device well-known logical unit (w-lun) to make sure that the device w-lun unit attention condition is cleared. Write protection: UFS device specification allows LUs to be write protected, either permanently or power on write protected. If any LU is power on write protected and if the card is power cycled (by powering off VCCQ and/or VCC rails), LU's write protect status would be lost. So this means those LUs can be written now. To ensures that UFS device is power cycled only if the power on protect is not set for any of the LUs, check if power on write protect is set and if device is in sleep/power-off state & link in inactive state (Hibern8 or OFF state). If none of the Logical Units on UFS device is power on write protected then all UFS device power rails (VCC, VCCQ & VCCQ2) can be turned off if UFS device is in power-off state and UFS link is in OFF state. But current implementation would disable all device power rails even if UFS link is not in OFF state. Low power mode: If UFS link is in OFF state then UFS host controller can be power collapsed to avoid leakage current from it. Note that if UFS host controller is power collapsed, full UFS reinitialization will be required on resume to re-establish the link between host and device. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25 12:32:30 +00:00
return ufshcd_runtime_resume(dev_get_drvdata(dev));
}
static int ufshcd_pltfrm_runtime_idle(struct device *dev)
{
ufs: add UFS power management support This patch adds support for UFS device and UniPro link power management during runtime/system PM. Main idea is to define multiple UFS low power levels based on UFS device and UFS link power states. This would allow any specific platform or pci driver to choose the best suited low power level during runtime and system suspend based on their power goals. bkops handlig: To put the UFS device in sleep state when bkops is disabled, first query the bkops status from the device and enable bkops on device only if device needs time to perform the bkops. START_STOP handling: Before sending START_STOP_UNIT to the device well-known logical unit (w-lun) to make sure that the device w-lun unit attention condition is cleared. Write protection: UFS device specification allows LUs to be write protected, either permanently or power on write protected. If any LU is power on write protected and if the card is power cycled (by powering off VCCQ and/or VCC rails), LU's write protect status would be lost. So this means those LUs can be written now. To ensures that UFS device is power cycled only if the power on protect is not set for any of the LUs, check if power on write protect is set and if device is in sleep/power-off state & link in inactive state (Hibern8 or OFF state). If none of the Logical Units on UFS device is power on write protected then all UFS device power rails (VCC, VCCQ & VCCQ2) can be turned off if UFS device is in power-off state and UFS link is in OFF state. But current implementation would disable all device power rails even if UFS link is not in OFF state. Low power mode: If UFS link is in OFF state then UFS host controller can be power collapsed to avoid leakage current from it. Note that if UFS host controller is power collapsed, full UFS reinitialization will be required on resume to re-establish the link between host and device. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25 12:32:30 +00:00
return ufshcd_runtime_idle(dev_get_drvdata(dev));
}
#else /* !CONFIG_PM_RUNTIME */
#define ufshcd_pltfrm_runtime_suspend NULL
#define ufshcd_pltfrm_runtime_resume NULL
#define ufshcd_pltfrm_runtime_idle NULL
#endif /* CONFIG_PM_RUNTIME */
ufs: add UFS power management support This patch adds support for UFS device and UniPro link power management during runtime/system PM. Main idea is to define multiple UFS low power levels based on UFS device and UFS link power states. This would allow any specific platform or pci driver to choose the best suited low power level during runtime and system suspend based on their power goals. bkops handlig: To put the UFS device in sleep state when bkops is disabled, first query the bkops status from the device and enable bkops on device only if device needs time to perform the bkops. START_STOP handling: Before sending START_STOP_UNIT to the device well-known logical unit (w-lun) to make sure that the device w-lun unit attention condition is cleared. Write protection: UFS device specification allows LUs to be write protected, either permanently or power on write protected. If any LU is power on write protected and if the card is power cycled (by powering off VCCQ and/or VCC rails), LU's write protect status would be lost. So this means those LUs can be written now. To ensures that UFS device is power cycled only if the power on protect is not set for any of the LUs, check if power on write protect is set and if device is in sleep/power-off state & link in inactive state (Hibern8 or OFF state). If none of the Logical Units on UFS device is power on write protected then all UFS device power rails (VCC, VCCQ & VCCQ2) can be turned off if UFS device is in power-off state and UFS link is in OFF state. But current implementation would disable all device power rails even if UFS link is not in OFF state. Low power mode: If UFS link is in OFF state then UFS host controller can be power collapsed to avoid leakage current from it. Note that if UFS host controller is power collapsed, full UFS reinitialization will be required on resume to re-establish the link between host and device. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25 12:32:30 +00:00
static void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
{
ufshcd_shutdown((struct ufs_hba *)platform_get_drvdata(pdev));
}
/**
* ufshcd_pltfrm_probe - probe routine of the driver
* @pdev: pointer to Platform device handle
*
* Returns 0 on success, non-zero value on failure
*/
static int ufshcd_pltfrm_probe(struct platform_device *pdev)
{
struct ufs_hba *hba;
void __iomem *mmio_base;
struct resource *mem_res;
int irq, err;
struct device *dev = &pdev->dev;
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mmio_base = devm_ioremap_resource(dev, mem_res);
if (IS_ERR(*(void **)&mmio_base)) {
err = PTR_ERR(*(void **)&mmio_base);
goto out;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "IRQ resource not available\n");
err = -ENODEV;
goto out;
}
err = ufshcd_alloc_host(dev, &hba);
if (err) {
dev_err(&pdev->dev, "Allocation failed\n");
goto out;
}
hba->vops = get_variant_ops(&pdev->dev);
err = ufshcd_parse_clock_info(hba);
if (err) {
dev_err(&pdev->dev, "%s: clock parse failed %d\n",
__func__, err);
goto out;
}
err = ufshcd_parse_regulator_info(hba);
if (err) {
dev_err(&pdev->dev, "%s: regulator init failed %d\n",
__func__, err);
goto out;
}
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
err = ufshcd_init(hba, mmio_base, irq);
if (err) {
dev_err(dev, "Intialization failed\n");
goto out_disable_rpm;
}
platform_set_drvdata(pdev, hba);
return 0;
out_disable_rpm:
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
out:
return err;
}
/**
* ufshcd_pltfrm_remove - remove platform driver routine
* @pdev: pointer to platform device handle
*
* Returns 0 on success, non-zero value on failure
*/
static int ufshcd_pltfrm_remove(struct platform_device *pdev)
{
struct ufs_hba *hba = platform_get_drvdata(pdev);
pm_runtime_get_sync(&(pdev)->dev);
ufshcd_remove(hba);
return 0;
}
static const struct of_device_id ufs_of_match[] = {
{ .compatible = "jedec,ufs-1.1"},
{},
};
static const struct dev_pm_ops ufshcd_dev_pm_ops = {
.suspend = ufshcd_pltfrm_suspend,
.resume = ufshcd_pltfrm_resume,
.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
.runtime_resume = ufshcd_pltfrm_runtime_resume,
.runtime_idle = ufshcd_pltfrm_runtime_idle,
};
static struct platform_driver ufshcd_pltfrm_driver = {
.probe = ufshcd_pltfrm_probe,
.remove = ufshcd_pltfrm_remove,
ufs: add UFS power management support This patch adds support for UFS device and UniPro link power management during runtime/system PM. Main idea is to define multiple UFS low power levels based on UFS device and UFS link power states. This would allow any specific platform or pci driver to choose the best suited low power level during runtime and system suspend based on their power goals. bkops handlig: To put the UFS device in sleep state when bkops is disabled, first query the bkops status from the device and enable bkops on device only if device needs time to perform the bkops. START_STOP handling: Before sending START_STOP_UNIT to the device well-known logical unit (w-lun) to make sure that the device w-lun unit attention condition is cleared. Write protection: UFS device specification allows LUs to be write protected, either permanently or power on write protected. If any LU is power on write protected and if the card is power cycled (by powering off VCCQ and/or VCC rails), LU's write protect status would be lost. So this means those LUs can be written now. To ensures that UFS device is power cycled only if the power on protect is not set for any of the LUs, check if power on write protect is set and if device is in sleep/power-off state & link in inactive state (Hibern8 or OFF state). If none of the Logical Units on UFS device is power on write protected then all UFS device power rails (VCC, VCCQ & VCCQ2) can be turned off if UFS device is in power-off state and UFS link is in OFF state. But current implementation would disable all device power rails even if UFS link is not in OFF state. Low power mode: If UFS link is in OFF state then UFS host controller can be power collapsed to avoid leakage current from it. Note that if UFS host controller is power collapsed, full UFS reinitialization will be required on resume to re-establish the link between host and device. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Dolev Raviv <draviv@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25 12:32:30 +00:00
.shutdown = ufshcd_pltfrm_shutdown,
.driver = {
.name = "ufshcd",
.owner = THIS_MODULE,
.pm = &ufshcd_dev_pm_ops,
.of_match_table = ufs_of_match,
},
};
module_platform_driver(ufshcd_pltfrm_driver);
MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
MODULE_DESCRIPTION("UFS host controller Pltform bus based glue driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(UFSHCD_DRIVER_VERSION);