linux/include/rdma/rdmavt_qp.h

1004 lines
28 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
* Copyright(c) 2016 - 2020 Intel Corporation.
*/
#ifndef DEF_RDMAVT_INCQP_H
#define DEF_RDMAVT_INCQP_H
#include <rdma/rdma_vt.h>
#include <rdma/ib_pack.h>
#include <rdma/ib_verbs.h>
#include <rdma/rdmavt_cq.h>
#include <rdma/rvt-abi.h>
/*
* Atomic bit definitions for r_aflags.
*/
#define RVT_R_WRID_VALID 0
#define RVT_R_REWIND_SGE 1
/*
* Bit definitions for r_flags.
*/
#define RVT_R_REUSE_SGE 0x01
#define RVT_R_RDMAR_SEQ 0x02
#define RVT_R_RSP_NAK 0x04
#define RVT_R_RSP_SEND 0x08
#define RVT_R_COMM_EST 0x10
/*
* If a packet's QP[23:16] bits match this value, then it is
* a PSM packet and the hardware will expect a KDETH header
* following the BTH.
*/
#define RVT_KDETH_QP_PREFIX 0x80
#define RVT_KDETH_QP_SUFFIX 0xffff
#define RVT_KDETH_QP_PREFIX_MASK 0x00ff0000
#define RVT_KDETH_QP_PREFIX_SHIFT 16
#define RVT_KDETH_QP_BASE (u32)(RVT_KDETH_QP_PREFIX << \
RVT_KDETH_QP_PREFIX_SHIFT)
#define RVT_KDETH_QP_MAX (u32)(RVT_KDETH_QP_BASE + RVT_KDETH_QP_SUFFIX)
/*
* If a packet's LNH == BTH and DEST QPN[23:16] in the BTH match this
* prefix value, then it is an AIP packet with a DETH containing the entropy
* value in byte 4 following the BTH.
*/
#define RVT_AIP_QP_PREFIX 0x81
#define RVT_AIP_QP_SUFFIX 0xffff
#define RVT_AIP_QP_PREFIX_MASK 0x00ff0000
#define RVT_AIP_QP_PREFIX_SHIFT 16
#define RVT_AIP_QP_BASE (u32)(RVT_AIP_QP_PREFIX << \
RVT_AIP_QP_PREFIX_SHIFT)
#define RVT_AIP_QPN_MAX BIT(RVT_AIP_QP_PREFIX_SHIFT)
#define RVT_AIP_QP_MAX (u32)(RVT_AIP_QP_BASE + RVT_AIP_QPN_MAX - 1)
/*
* Bit definitions for s_flags.
*
* RVT_S_SIGNAL_REQ_WR - set if QP send WRs contain completion signaled
* RVT_S_BUSY - send tasklet is processing the QP
* RVT_S_TIMER - the RC retry timer is active
* RVT_S_ACK_PENDING - an ACK is waiting to be sent after RDMA read/atomics
* RVT_S_WAIT_FENCE - waiting for all prior RDMA read or atomic SWQEs
* before processing the next SWQE
* RVT_S_WAIT_RDMAR - waiting for a RDMA read or atomic SWQE to complete
* before processing the next SWQE
* RVT_S_WAIT_RNR - waiting for RNR timeout
* RVT_S_WAIT_SSN_CREDIT - waiting for RC credits to process next SWQE
* RVT_S_WAIT_DMA - waiting for send DMA queue to drain before generating
* next send completion entry not via send DMA
* RVT_S_WAIT_PIO - waiting for a send buffer to be available
* RVT_S_WAIT_TX - waiting for a struct verbs_txreq to be available
* RVT_S_WAIT_DMA_DESC - waiting for DMA descriptors to be available
* RVT_S_WAIT_KMEM - waiting for kernel memory to be available
* RVT_S_WAIT_PSN - waiting for a packet to exit the send DMA queue
* RVT_S_WAIT_ACK - waiting for an ACK packet before sending more requests
* RVT_S_SEND_ONE - send one packet, request ACK, then wait for ACK
* RVT_S_ECN - a BECN was queued to the send engine
* RVT_S_MAX_BIT_MASK - The max bit that can be used by rdmavt
*/
#define RVT_S_SIGNAL_REQ_WR 0x0001
#define RVT_S_BUSY 0x0002
#define RVT_S_TIMER 0x0004
#define RVT_S_RESP_PENDING 0x0008
#define RVT_S_ACK_PENDING 0x0010
#define RVT_S_WAIT_FENCE 0x0020
#define RVT_S_WAIT_RDMAR 0x0040
#define RVT_S_WAIT_RNR 0x0080
#define RVT_S_WAIT_SSN_CREDIT 0x0100
#define RVT_S_WAIT_DMA 0x0200
#define RVT_S_WAIT_PIO 0x0400
#define RVT_S_WAIT_TX 0x0800
#define RVT_S_WAIT_DMA_DESC 0x1000
#define RVT_S_WAIT_KMEM 0x2000
#define RVT_S_WAIT_PSN 0x4000
#define RVT_S_WAIT_ACK 0x8000
#define RVT_S_SEND_ONE 0x10000
#define RVT_S_UNLIMITED_CREDIT 0x20000
#define RVT_S_ECN 0x40000
#define RVT_S_MAX_BIT_MASK 0x800000
/*
* Drivers should use s_flags starting with bit 31 down to the bit next to
* RVT_S_MAX_BIT_MASK
*/
/*
* Wait flags that would prevent any packet type from being sent.
*/
#define RVT_S_ANY_WAIT_IO \
(RVT_S_WAIT_PIO | RVT_S_WAIT_TX | \
RVT_S_WAIT_DMA_DESC | RVT_S_WAIT_KMEM)
/*
* Wait flags that would prevent send work requests from making progress.
*/
#define RVT_S_ANY_WAIT_SEND (RVT_S_WAIT_FENCE | RVT_S_WAIT_RDMAR | \
RVT_S_WAIT_RNR | RVT_S_WAIT_SSN_CREDIT | RVT_S_WAIT_DMA | \
RVT_S_WAIT_PSN | RVT_S_WAIT_ACK)
#define RVT_S_ANY_WAIT (RVT_S_ANY_WAIT_IO | RVT_S_ANY_WAIT_SEND)
/* Number of bits to pay attention to in the opcode for checking qp type */
#define RVT_OPCODE_QP_MASK 0xE0
/* Flags for checking QP state (see ib_rvt_state_ops[]) */
#define RVT_POST_SEND_OK 0x01
#define RVT_POST_RECV_OK 0x02
#define RVT_PROCESS_RECV_OK 0x04
#define RVT_PROCESS_SEND_OK 0x08
#define RVT_PROCESS_NEXT_SEND_OK 0x10
#define RVT_FLUSH_SEND 0x20
#define RVT_FLUSH_RECV 0x40
#define RVT_PROCESS_OR_FLUSH_SEND \
(RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND)
#define RVT_SEND_OR_FLUSH_OR_RECV_OK \
(RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND | RVT_PROCESS_RECV_OK)
/*
* Internal send flags
*/
#define RVT_SEND_RESERVE_USED IB_SEND_RESERVED_START
IB/rdmavt, hfi1: Fix NFSoRDMA failure with FRMR enabled Hanging has been observed while writing a file over NFSoRDMA. Dmesg on the server contains messages like these: [ 931.992501] svcrdma: Error -22 posting RDMA_READ [ 952.076879] svcrdma: Error -22 posting RDMA_READ [ 982.154127] svcrdma: Error -22 posting RDMA_READ [ 1012.235884] svcrdma: Error -22 posting RDMA_READ [ 1042.319194] svcrdma: Error -22 posting RDMA_READ Here is why: With the base memory management extension enabled, FRMR is used instead of FMR. The xprtrdma server issues each RDMA read request as the following bundle: (1)IB_WR_REG_MR, signaled; (2)IB_WR_RDMA_READ, signaled; (3)IB_WR_LOCAL_INV, signaled & fencing. These requests are signaled. In order to generate completion, the fast register work request is processed by the hfi1 send engine after being posted to the work queue, and the corresponding lkey is not valid until the request is processed. However, the rdmavt driver validates lkey when the RDMA read request is posted and thus it fails immediately with error -EINVAL (-22). This patch changes the work flow of local operations (fast register and local invalidate) so that fast register work requests are always processed immediately to ensure that the corresponding lkey is valid when subsequent work requests are posted. Local invalidate requests are processed immediately if fencing is not required and no previous local invalidate request is pending. To allow completion generation for signaled local operations that have been processed before posting to the work queue, an internal send flag RVT_SEND_COMPLETION_ONLY is added. The hfi1 send engine checks this flag and only generates completion for such requests. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-25 20:39:45 +00:00
#define RVT_SEND_COMPLETION_ONLY (IB_SEND_RESERVED_START << 1)
/**
* rvt_ud_wr - IB UD work plus AH cache
* @wr: valid IB work request
* @attr: pointer to an allocated AH attribute
*
* Special case the UD WR so we can keep track of the AH attributes.
*
* NOTE: This data structure is stricly ordered wr then attr. I.e the attr
* MUST come after wr. The ib_ud_wr is sized and copied in rvt_post_one_wr.
* The copy assumes that wr is first.
*/
struct rvt_ud_wr {
struct ib_ud_wr wr;
struct rdma_ah_attr *attr;
};
/*
* Send work request queue entry.
* The size of the sg_list is determined when the QP is created and stored
* in qp->s_max_sge.
*/
struct rvt_swqe {
union {
struct ib_send_wr wr; /* don't use wr.sg_list */
struct rvt_ud_wr ud_wr;
struct ib_reg_wr reg_wr;
struct ib_rdma_wr rdma_wr;
struct ib_atomic_wr atomic_wr;
};
u32 psn; /* first packet sequence number */
u32 lpsn; /* last packet sequence number */
u32 ssn; /* send sequence number */
u32 length; /* total length of data in sg_list */
void *priv; /* driver dependent field */
struct rvt_sge sg_list[];
};
/**
* struct rvt_krwq - kernel struct receive work request
* @p_lock: lock to protect producer of the kernel buffer
* @head: index of next entry to fill
* @c_lock:lock to protect consumer of the kernel buffer
* @tail: index of next entry to pull
* @count: count is aproximate of total receive enteries posted
* @rvt_rwqe: struct of receive work request queue entry
*
* This structure is used to contain the head pointer,
* tail pointer and receive work queue entries for kernel
* mode user.
*/
struct rvt_krwq {
spinlock_t p_lock; /* protect producer */
u32 head; /* new work requests posted to the head */
/* protect consumer */
spinlock_t c_lock ____cacheline_aligned_in_smp;
u32 tail; /* receives pull requests from here. */
u32 count; /* approx count of receive entries posted */
struct rvt_rwqe *curr_wq;
struct rvt_rwqe wq[];
};
/*
* rvt_get_swqe_ah - Return the pointer to the struct rvt_ah
* @swqe: valid Send WQE
*
*/
static inline struct rvt_ah *rvt_get_swqe_ah(struct rvt_swqe *swqe)
{
return ibah_to_rvtah(swqe->ud_wr.wr.ah);
}
/**
* rvt_get_swqe_ah_attr - Return the cached ah attribute information
* @swqe: valid Send WQE
*
*/
static inline struct rdma_ah_attr *rvt_get_swqe_ah_attr(struct rvt_swqe *swqe)
{
return swqe->ud_wr.attr;
}
/**
* rvt_get_swqe_remote_qpn - Access the remote QPN value
* @swqe: valid Send WQE
*
*/
static inline u32 rvt_get_swqe_remote_qpn(struct rvt_swqe *swqe)
{
return swqe->ud_wr.wr.remote_qpn;
}
/**
* rvt_get_swqe_remote_qkey - Acces the remote qkey value
* @swqe: valid Send WQE
*
*/
static inline u32 rvt_get_swqe_remote_qkey(struct rvt_swqe *swqe)
{
return swqe->ud_wr.wr.remote_qkey;
}
/**
* rvt_get_swqe_pkey_index - Access the pkey index
* @swqe: valid Send WQE
*
*/
static inline u16 rvt_get_swqe_pkey_index(struct rvt_swqe *swqe)
{
return swqe->ud_wr.wr.pkey_index;
}
struct rvt_rq {
struct rvt_rwq *wq;
struct rvt_krwq *kwq;
u32 size; /* size of RWQE array */
u8 max_sge;
/* protect changes in this struct */
spinlock_t lock ____cacheline_aligned_in_smp;
};
IB/rdmavt: Fix RQ counting issues causing use of an invalid RWQE The lookaside count is improperly initialized to the size of the Receive Queue with the additional +1. In the traces below, the RQ size is 384, so the count was set to 385. The lookaside count is then rarely refreshed. Note the high and incorrect count in the trace below: rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385 rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1 The head,tail indicate there is only one RWQE posted although the count says 385 and we correctly return the element 0. The next call to rvt_get_rwqe with the decremented count: rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384 rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1 Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1, which is not valid because of the bogus high count. Best case, the RWQE has never been posted and the rc logic sees an RWQE that is too small (all zeros) and puts the QP into an error state. In the worst case, a server slow at posting receive buffers might fool rvt_get_rwqe() into fetching an old RWQE and corrupt memory. Fix by deleting the faulty initialization code and creating an inline to fetch the posted count and convert all callers to use new inline. Fixes: f592ae3c999f ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs") Link: https://lore.kernel.org/r/20200728183848.22226.29132.stgit@awfm-01.aw.intel.com Reported-by: Zhaojuan Guo <zguo@redhat.com> Cc: <stable@vger.kernel.org> # 5.4.x Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by: Honggang Li <honli@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-28 18:38:48 +00:00
/**
* rvt_get_rq_count - count numbers of request work queue entries
* in circular buffer
* @rq: data structure for request queue entry
* @head: head indices of the circular buffer
* @tail: tail indices of the circular buffer
*
* Return - total number of entries in the Receive Queue
*/
static inline u32 rvt_get_rq_count(struct rvt_rq *rq, u32 head, u32 tail)
{
u32 count = head - tail;
if ((s32)count < 0)
count += rq->size;
return count;
}
/*
* This structure holds the information that the send tasklet needs
* to send a RDMA read response or atomic operation.
*/
struct rvt_ack_entry {
struct rvt_sge rdma_sge;
u64 atomic_data;
u32 psn;
u32 lpsn;
u8 opcode;
u8 sent;
void *priv;
};
#define RC_QP_SCALING_INTERVAL 5
#define RVT_OPERATION_PRIV 0x00000001
#define RVT_OPERATION_ATOMIC 0x00000002
#define RVT_OPERATION_ATOMIC_SGE 0x00000004
#define RVT_OPERATION_LOCAL 0x00000008
#define RVT_OPERATION_USE_RESERVE 0x00000010
#define RVT_OPERATION_IGN_RNR_CNT 0x00000020
#define RVT_OPERATION_MAX (IB_WR_RESERVED10 + 1)
/**
* rvt_operation_params - op table entry
* @length - the length to copy into the swqe entry
* @qpt_support - a bit mask indicating QP type support
* @flags - RVT_OPERATION flags (see above)
*
* This supports table driven post send so that
* the driver can have differing an potentially
* different sets of operations.
*
**/
struct rvt_operation_params {
size_t length;
u32 qpt_support;
u32 flags;
};
/*
* Common variables are protected by both r_rq.lock and s_lock in that order
* which only happens in modify_qp() or changing the QP 'state'.
*/
struct rvt_qp {
struct ib_qp ibqp;
void *priv; /* Driver private data */
/* read mostly fields above and below */
struct rdma_ah_attr remote_ah_attr;
struct rdma_ah_attr alt_ah_attr;
struct rvt_qp __rcu *next; /* link list for QPN hash table */
struct rvt_swqe *s_wq; /* send work queue */
struct rvt_mmap_info *ip;
unsigned long timeout_jiffies; /* computed from timeout */
int srate_mbps; /* s_srate (below) converted to Mbit/s */
pid_t pid; /* pid for user mode QPs */
u32 remote_qpn;
u32 qkey; /* QKEY for this QP (for UD or RD) */
u32 s_size; /* send work queue size */
u16 pmtu; /* decoded from path_mtu */
u8 log_pmtu; /* shift for pmtu */
u8 state; /* QP state */
u8 allowed_ops; /* high order bits of allowed opcodes */
u8 qp_access_flags;
u8 alt_timeout; /* Alternate path timeout for this QP */
u8 timeout; /* Timeout for this QP */
u8 s_srate;
u8 s_mig_state;
u8 port_num;
u8 s_pkey_index; /* PKEY index to use */
u8 s_alt_pkey_index; /* Alternate path PKEY index to use */
u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */
u8 s_max_rd_atomic; /* max number of RDMA read/atomic to send */
u8 s_retry_cnt; /* number of times to retry */
u8 s_rnr_retry_cnt;
u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */
u8 s_max_sge; /* size of s_wq->sg_list */
u8 s_draining;
/* start of read/write fields */
atomic_t refcount ____cacheline_aligned_in_smp;
wait_queue_head_t wait;
struct rvt_ack_entry *s_ack_queue;
struct rvt_sge_state s_rdma_read_sge;
spinlock_t r_lock ____cacheline_aligned_in_smp; /* used for APM */
u32 r_psn; /* expected rcv packet sequence number */
unsigned long r_aflags;
u64 r_wr_id; /* ID for current receive WQE */
u32 r_ack_psn; /* PSN for next ACK or atomic ACK */
u32 r_len; /* total length of r_sge */
u32 r_rcv_len; /* receive data len processed */
u32 r_msn; /* message sequence number */
u8 r_state; /* opcode of last packet received */
u8 r_flags;
u8 r_head_ack_queue; /* index into s_ack_queue[] */
u8 r_adefered; /* defered ack count */
struct list_head rspwait; /* link for waiting to respond */
struct rvt_sge_state r_sge; /* current receive data */
struct rvt_rq r_rq; /* receive work queue */
/* post send line */
spinlock_t s_hlock ____cacheline_aligned_in_smp;
u32 s_head; /* new entries added here */
u32 s_next_psn; /* PSN for next request */
u32 s_avail; /* number of entries avail */
u32 s_ssn; /* SSN of tail entry */
atomic_t s_reserved_used; /* reserved entries in use */
spinlock_t s_lock ____cacheline_aligned_in_smp;
u32 s_flags;
struct rvt_sge_state *s_cur_sge;
struct rvt_swqe *s_wqe;
struct rvt_sge_state s_sge; /* current send request data */
struct rvt_mregion *s_rdma_mr;
u32 s_len; /* total length of s_sge */
u32 s_rdma_read_len; /* total length of s_rdma_read_sge */
u32 s_last_psn; /* last response PSN processed */
u32 s_sending_psn; /* lowest PSN that is being sent */
u32 s_sending_hpsn; /* highest PSN that is being sent */
u32 s_psn; /* current packet sequence number */
u32 s_ack_rdma_psn; /* PSN for sending RDMA read responses */
u32 s_ack_psn; /* PSN for acking sends and RDMA writes */
u32 s_tail; /* next entry to process */
u32 s_cur; /* current work queue entry */
u32 s_acked; /* last un-ACK'ed entry */
u32 s_last; /* last completed entry */
u32 s_lsn; /* limit sequence number (credit) */
u32 s_ahgpsn; /* set to the psn in the copy of the header */
u16 s_cur_size; /* size of send packet in bytes */
u16 s_rdma_ack_cnt;
u8 s_hdrwords; /* size of s_hdr in 32 bit words */
s8 s_ahgidx;
u8 s_state; /* opcode of last packet sent */
u8 s_ack_state; /* opcode of packet to ACK */
u8 s_nak_state; /* non-zero if NAK is pending */
u8 r_nak_state; /* non-zero if NAK is pending */
u8 s_retry; /* requester retry counter */
u8 s_rnr_retry; /* requester RNR retry counter */
u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */
u8 s_tail_ack_queue; /* index into s_ack_queue[] */
IB/hfi1: Add an s_acked_ack_queue pointer The s_ack_queue is managed by two pointers into the ring: r_head_ack_queue and s_tail_ack_queue. r_head_ack_queue is the index of where the next received request is going to be placed and s_tail_ack_queue is the entry of the request currently being processed. This works perfectly fine for normal Verbs as the requests are processed one at a time and the s_tail_ack_queue is not moved until the request that it points to is fully completed. In this fashion, s_tail_ack_queue constantly chases r_head_ack_queue and the two pointers can easily be used to determine "queue full" and "queue empty" conditions. The detection of these two conditions are imported in determining when an old entry can safely be overwritten with a new received request and the resources associated with the old request be safely released. When pipelined TID RDMA WRITE is introduced into this mix, things look very different. r_head_ack_queue is still the point at which a newly received request will be inserted, s_tail_ack_queue is still the currently processed request. However, with pipelined TID RDMA WRITE requests, s_tail_ack_queue moves to the next request once all TID RDMA WRITE responses for that request have been sent. The rest of the protocol for a particular request is managed by other pointers specific to TID RDMA - r_tid_tail and r_tid_ack - which point to the entries for which the next TID RDMA DATA packets are going to arrive and the request for which the next TID RDMA ACK packets are to be generated, respectively. What this means is that entries in the ring, which are "behind" s_tail_ack_queue (entries which s_tail_ack_queue has gone past) are no longer considered complete. This is where the problem is - a newly received request could potentially overwrite a still active TID RDMA WRITE request. The reason why the TID RDMA pointers trail s_tail_ack_queue is that the normal Verbs send engine uses s_tail_ack_queue as the pointer for the next response. Since TID RDMA WRITE responses are processed by the normal Verbs send engine, s_tail_ack_queue had to be moved to the next entry once all TID RDMA WRITE response packets were sent to get the desired pipelining between requests. Doing otherwise would mean that the normal Verbs send engine would not be able to send the TID RDMA WRITE responses for the next TID RDMA request until the current one is fully completed. This patch introduces the s_acked_ack_queue index to point to the next request to complete on the responder side. For requests other than TID RDMA WRITE, s_acked_ack_queue should always be kept in sync with s_tail_ack_queue. For TID RDMA WRITE request, it may fall behind s_tail_ack_queue. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-01-24 05:48:48 +00:00
u8 s_acked_ack_queue; /* index into s_ack_queue[] */
struct rvt_sge_state s_ack_rdma_sge;
struct timer_list s_timer;
struct hrtimer s_rnr_timer;
atomic_t local_ops_pending; /* number of fast_reg/local_inv reqs */
/*
* This sge list MUST be last. Do not add anything below here.
*/
IB/rdmavt: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200507185342.GA14476@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-07 18:53:42 +00:00
struct rvt_sge r_sg_list[] /* verified SGEs */
____cacheline_aligned_in_smp;
};
struct rvt_srq {
struct ib_srq ibsrq;
struct rvt_rq rq;
struct rvt_mmap_info *ip;
/* send signal when number of RWQEs < limit */
u32 limit;
};
static inline struct rvt_srq *ibsrq_to_rvtsrq(struct ib_srq *ibsrq)
{
return container_of(ibsrq, struct rvt_srq, ibsrq);
}
static inline struct rvt_qp *ibqp_to_rvtqp(struct ib_qp *ibqp)
{
return container_of(ibqp, struct rvt_qp, ibqp);
}
#define RVT_QPN_MAX BIT(24)
#define RVT_QPNMAP_ENTRIES (RVT_QPN_MAX / PAGE_SIZE / BITS_PER_BYTE)
#define RVT_BITS_PER_PAGE (PAGE_SIZE * BITS_PER_BYTE)
#define RVT_BITS_PER_PAGE_MASK (RVT_BITS_PER_PAGE - 1)
#define RVT_QPN_MASK IB_QPN_MASK
/*
* QPN-map pages start out as NULL, they get allocated upon
* first use and are never deallocated. This way,
* large bitmaps are not allocated unless large numbers of QPs are used.
*/
struct rvt_qpn_map {
void *page;
};
struct rvt_qpn_table {
spinlock_t lock; /* protect changes to the qp table */
unsigned flags; /* flags for QP0/1 allocated for each port */
u32 last; /* last QP number allocated */
u32 nmaps; /* size of the map table */
u16 limit;
u8 incr;
/* bit map of free QP numbers other than 0/1 */
struct rvt_qpn_map map[RVT_QPNMAP_ENTRIES];
};
struct rvt_qp_ibdev {
u32 qp_table_size;
u32 qp_table_bits;
struct rvt_qp __rcu **qp_table;
spinlock_t qpt_lock; /* qptable lock */
struct rvt_qpn_table qpn_table;
};
/*
* There is one struct rvt_mcast for each multicast GID.
* All attached QPs are then stored as a list of
* struct rvt_mcast_qp.
*/
struct rvt_mcast_qp {
struct list_head list;
struct rvt_qp *qp;
};
struct rvt_mcast_addr {
union ib_gid mgid;
u16 lid;
};
struct rvt_mcast {
struct rb_node rb_node;
struct rvt_mcast_addr mcast_addr;
struct list_head qp_list;
wait_queue_head_t wait;
atomic_t refcount;
int n_attached;
};
/*
* Since struct rvt_swqe is not a fixed size, we can't simply index into
* struct rvt_qp.s_wq. This function does the array index computation.
*/
static inline struct rvt_swqe *rvt_get_swqe_ptr(struct rvt_qp *qp,
unsigned n)
{
return (struct rvt_swqe *)((char *)qp->s_wq +
(sizeof(struct rvt_swqe) +
qp->s_max_sge *
sizeof(struct rvt_sge)) * n);
}
/*
* Since struct rvt_rwqe is not a fixed size, we can't simply index into
* struct rvt_rwq.wq. This function does the array index computation.
*/
static inline struct rvt_rwqe *rvt_get_rwqe_ptr(struct rvt_rq *rq, unsigned n)
{
return (struct rvt_rwqe *)
((char *)rq->kwq->curr_wq +
(sizeof(struct rvt_rwqe) +
rq->max_sge * sizeof(struct ib_sge)) * n);
}
/**
* rvt_is_user_qp - return if this is user mode QP
* @qp - the target QP
*/
static inline bool rvt_is_user_qp(struct rvt_qp *qp)
{
return !!qp->pid;
}
/**
* rvt_get_qp - get a QP reference
* @qp - the QP to hold
*/
static inline void rvt_get_qp(struct rvt_qp *qp)
{
atomic_inc(&qp->refcount);
}
/**
* rvt_put_qp - release a QP reference
* @qp - the QP to release
*/
static inline void rvt_put_qp(struct rvt_qp *qp)
{
if (qp && atomic_dec_and_test(&qp->refcount))
wake_up(&qp->wait);
}
/**
* rvt_put_swqe - drop mr refs held by swqe
* @wqe - the send wqe
*
* This drops any mr references held by the swqe
*/
static inline void rvt_put_swqe(struct rvt_swqe *wqe)
{
int i;
for (i = 0; i < wqe->wr.num_sge; i++) {
struct rvt_sge *sge = &wqe->sg_list[i];
rvt_put_mr(sge->mr);
}
}
/**
* rvt_qp_wqe_reserve - reserve operation
* @qp - the rvt qp
* @wqe - the send wqe
*
* This routine used in post send to record
* a wqe relative reserved operation use.
*/
static inline void rvt_qp_wqe_reserve(
struct rvt_qp *qp,
struct rvt_swqe *wqe)
{
atomic_inc(&qp->s_reserved_used);
}
/**
* rvt_qp_wqe_unreserve - clean reserved operation
* @qp - the rvt qp
IB/hfi1: Unreserve a flushed OPFN request When an OPFN request is flushed, the request is completed without unreserving itself from the send queue. Subsequently, when a new request is post sent, the following warning will be triggered: WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt] Call Trace: [<ffffffffbbb61e41>] dump_stack+0x19/0x1b [<ffffffffbb497688>] __warn+0xd8/0x100 [<ffffffffbb4977cd>] warn_slowpath_null+0x1d/0x20 [<ffffffffc01c941a>] rvt_post_send+0x72a/0x880 [rdmavt] [<ffffffffbb4dcabe>] ? account_entity_dequeue+0xae/0xd0 [<ffffffffbb61d645>] ? __kmalloc+0x55/0x230 [<ffffffffc04e1a4c>] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs] [<ffffffffc04e5e36>] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs] [<ffffffffc04dbce6>] ib_uverbs_write+0x286/0x460 [ib_uverbs] [<ffffffffbb6f9457>] ? security_file_permission+0x27/0xa0 [<ffffffffbb641650>] vfs_write+0xc0/0x1f0 [<ffffffffbb64246f>] SyS_write+0x7f/0xf0 [<ffffffffbbb74ddb>] system_call_fastpath+0x22/0x27 This patch fixes the problem by moving rvt_qp_wqe_unreserve() into rvt_qp_complete_swqe() to simplify the code and make it less error-prone. Fixes: ca95f802ef51 ("IB/hfi1: Unreserve a reserved request when it is completed") Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-15 16:45:28 +00:00
* @flags - send wqe flags
*
* This decrements the reserve use count.
*
* This call MUST precede the change to
* s_last to insure that post send sees a stable
* s_avail.
*
* An smp_mp__after_atomic() is used to insure
* the compiler does not juggle the order of the s_last
* ring index and the decrementing of s_reserved_used.
*/
IB/hfi1: Unreserve a flushed OPFN request When an OPFN request is flushed, the request is completed without unreserving itself from the send queue. Subsequently, when a new request is post sent, the following warning will be triggered: WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt] Call Trace: [<ffffffffbbb61e41>] dump_stack+0x19/0x1b [<ffffffffbb497688>] __warn+0xd8/0x100 [<ffffffffbb4977cd>] warn_slowpath_null+0x1d/0x20 [<ffffffffc01c941a>] rvt_post_send+0x72a/0x880 [rdmavt] [<ffffffffbb4dcabe>] ? account_entity_dequeue+0xae/0xd0 [<ffffffffbb61d645>] ? __kmalloc+0x55/0x230 [<ffffffffc04e1a4c>] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs] [<ffffffffc04e5e36>] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs] [<ffffffffc04dbce6>] ib_uverbs_write+0x286/0x460 [ib_uverbs] [<ffffffffbb6f9457>] ? security_file_permission+0x27/0xa0 [<ffffffffbb641650>] vfs_write+0xc0/0x1f0 [<ffffffffbb64246f>] SyS_write+0x7f/0xf0 [<ffffffffbbb74ddb>] system_call_fastpath+0x22/0x27 This patch fixes the problem by moving rvt_qp_wqe_unreserve() into rvt_qp_complete_swqe() to simplify the code and make it less error-prone. Fixes: ca95f802ef51 ("IB/hfi1: Unreserve a reserved request when it is completed") Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-15 16:45:28 +00:00
static inline void rvt_qp_wqe_unreserve(struct rvt_qp *qp, int flags)
{
IB/hfi1: Unreserve a flushed OPFN request When an OPFN request is flushed, the request is completed without unreserving itself from the send queue. Subsequently, when a new request is post sent, the following warning will be triggered: WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt] Call Trace: [<ffffffffbbb61e41>] dump_stack+0x19/0x1b [<ffffffffbb497688>] __warn+0xd8/0x100 [<ffffffffbb4977cd>] warn_slowpath_null+0x1d/0x20 [<ffffffffc01c941a>] rvt_post_send+0x72a/0x880 [rdmavt] [<ffffffffbb4dcabe>] ? account_entity_dequeue+0xae/0xd0 [<ffffffffbb61d645>] ? __kmalloc+0x55/0x230 [<ffffffffc04e1a4c>] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs] [<ffffffffc04e5e36>] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs] [<ffffffffc04dbce6>] ib_uverbs_write+0x286/0x460 [ib_uverbs] [<ffffffffbb6f9457>] ? security_file_permission+0x27/0xa0 [<ffffffffbb641650>] vfs_write+0xc0/0x1f0 [<ffffffffbb64246f>] SyS_write+0x7f/0xf0 [<ffffffffbbb74ddb>] system_call_fastpath+0x22/0x27 This patch fixes the problem by moving rvt_qp_wqe_unreserve() into rvt_qp_complete_swqe() to simplify the code and make it less error-prone. Fixes: ca95f802ef51 ("IB/hfi1: Unreserve a reserved request when it is completed") Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-15 16:45:28 +00:00
if (unlikely(flags & RVT_SEND_RESERVE_USED)) {
atomic_dec(&qp->s_reserved_used);
/* insure no compiler re-order up to s_last change */
smp_mb__after_atomic();
}
}
extern const enum ib_wc_opcode ib_rvt_wc_opcode[];
/*
* Compare the lower 24 bits of the msn values.
* Returns an integer <, ==, or > than zero.
*/
static inline int rvt_cmp_msn(u32 a, u32 b)
{
return (((int)a) - ((int)b)) << 8;
}
__be32 rvt_compute_aeth(struct rvt_qp *qp);
void rvt_get_credit(struct rvt_qp *qp, u32 aeth);
u32 rvt_restart_sge(struct rvt_sge_state *ss, struct rvt_swqe *wqe, u32 len);
/**
* rvt_div_round_up_mtu - round up divide
* @qp - the qp pair
* @len - the length
*
* Perform a shift based mtu round up divide
*/
static inline u32 rvt_div_round_up_mtu(struct rvt_qp *qp, u32 len)
{
return (len + qp->pmtu - 1) >> qp->log_pmtu;
}
/**
* @qp - the qp pair
* @len - the length
*
* Perform a shift based mtu divide
*/
static inline u32 rvt_div_mtu(struct rvt_qp *qp, u32 len)
{
return len >> qp->log_pmtu;
}
/**
* rvt_timeout_to_jiffies - Convert a ULP timeout input into jiffies
* @timeout - timeout input(0 - 31).
*
* Return a timeout value in jiffies.
*/
static inline unsigned long rvt_timeout_to_jiffies(u8 timeout)
{
if (timeout > 31)
timeout = 31;
return usecs_to_jiffies(1U << timeout) * 4096UL / 1000UL;
}
/**
* rvt_lookup_qpn - return the QP with the given QPN
* @ibp: the ibport
* @qpn: the QP number to look up
*
* The caller must hold the rcu_read_lock(), and keep the lock until
* the returned qp is no longer in use.
*/
static inline struct rvt_qp *rvt_lookup_qpn(struct rvt_dev_info *rdi,
struct rvt_ibport *rvp,
u32 qpn) __must_hold(RCU)
{
struct rvt_qp *qp = NULL;
if (unlikely(qpn <= 1)) {
qp = rcu_dereference(rvp->qp[qpn]);
} else {
u32 n = hash_32(qpn, rdi->qp_dev->qp_table_bits);
for (qp = rcu_dereference(rdi->qp_dev->qp_table[n]); qp;
qp = rcu_dereference(qp->next))
if (qp->ibqp.qp_num == qpn)
break;
}
return qp;
}
/**
* rvt_mod_retry_timer - mod a retry timer
* @qp - the QP
* @shift - timeout shift to wait for multiple packets
* Modify a potentially already running retry timer
*/
static inline void rvt_mod_retry_timer_ext(struct rvt_qp *qp, u8 shift)
{
struct ib_qp *ibqp = &qp->ibqp;
struct rvt_dev_info *rdi = ib_to_rvt(ibqp->device);
lockdep_assert_held(&qp->s_lock);
qp->s_flags |= RVT_S_TIMER;
/* 4.096 usec. * (1 << qp->timeout) */
mod_timer(&qp->s_timer, jiffies + rdi->busy_jiffies +
(qp->timeout_jiffies << shift));
}
static inline void rvt_mod_retry_timer(struct rvt_qp *qp)
{
return rvt_mod_retry_timer_ext(qp, 0);
}
/**
* rvt_put_qp_swqe - drop refs held by swqe
* @qp: the send qp
* @wqe: the send wqe
*
* This drops any references held by the swqe
*/
static inline void rvt_put_qp_swqe(struct rvt_qp *qp, struct rvt_swqe *wqe)
{
rvt_put_swqe(wqe);
if (qp->allowed_ops == IB_OPCODE_UD)
rdma_destroy_ah_attr(wqe->ud_wr.attr);
}
/**
* rvt_qp_sqwe_incr - increment ring index
* @qp: the qp
* @val: the starting value
*
* Return: the new value wrapping as appropriate
*/
static inline u32
rvt_qp_swqe_incr(struct rvt_qp *qp, u32 val)
{
if (++val >= qp->s_size)
val = 0;
return val;
}
int rvt_error_qp(struct rvt_qp *qp, enum ib_wc_status err);
/**
* rvt_recv_cq - add a new entry to completion queue
* by receive queue
* @qp: receive queue
* @wc: work completion entry to add
* @solicited: true if @entry is solicited
*
* This is wrapper function for rvt_enter_cq function call by
* receive queue. If rvt_cq_enter return false, it means cq is
* full and the qp is put into error state.
*/
static inline void rvt_recv_cq(struct rvt_qp *qp, struct ib_wc *wc,
bool solicited)
{
struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.recv_cq);
if (unlikely(!rvt_cq_enter(cq, wc, solicited)))
rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR);
}
/**
* rvt_send_cq - add a new entry to completion queue
* by send queue
* @qp: send queue
* @wc: work completion entry to add
* @solicited: true if @entry is solicited
*
* This is wrapper function for rvt_enter_cq function call by
* send queue. If rvt_cq_enter return false, it means cq is
* full and the qp is put into error state.
*/
static inline void rvt_send_cq(struct rvt_qp *qp, struct ib_wc *wc,
bool solicited)
{
struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.send_cq);
if (unlikely(!rvt_cq_enter(cq, wc, solicited)))
rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR);
}
/**
* rvt_qp_complete_swqe - insert send completion
* @qp - the qp
* @wqe - the send wqe
* @opcode - wc operation (driver dependent)
* @status - completion status
*
* Update the s_last information, and then insert a send
* completion into the completion
* queue if the qp indicates it should be done.
*
* See IBTA 10.7.3.1 for info on completion
* control.
*
* Return: new last
*/
static inline u32
rvt_qp_complete_swqe(struct rvt_qp *qp,
struct rvt_swqe *wqe,
enum ib_wc_opcode opcode,
enum ib_wc_status status)
{
bool need_completion;
u64 wr_id;
u32 byte_len, last;
int flags = wqe->wr.send_flags;
IB/hfi1: Unreserve a flushed OPFN request When an OPFN request is flushed, the request is completed without unreserving itself from the send queue. Subsequently, when a new request is post sent, the following warning will be triggered: WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt] Call Trace: [<ffffffffbbb61e41>] dump_stack+0x19/0x1b [<ffffffffbb497688>] __warn+0xd8/0x100 [<ffffffffbb4977cd>] warn_slowpath_null+0x1d/0x20 [<ffffffffc01c941a>] rvt_post_send+0x72a/0x880 [rdmavt] [<ffffffffbb4dcabe>] ? account_entity_dequeue+0xae/0xd0 [<ffffffffbb61d645>] ? __kmalloc+0x55/0x230 [<ffffffffc04e1a4c>] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs] [<ffffffffc04e5e36>] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs] [<ffffffffc04dbce6>] ib_uverbs_write+0x286/0x460 [ib_uverbs] [<ffffffffbb6f9457>] ? security_file_permission+0x27/0xa0 [<ffffffffbb641650>] vfs_write+0xc0/0x1f0 [<ffffffffbb64246f>] SyS_write+0x7f/0xf0 [<ffffffffbbb74ddb>] system_call_fastpath+0x22/0x27 This patch fixes the problem by moving rvt_qp_wqe_unreserve() into rvt_qp_complete_swqe() to simplify the code and make it less error-prone. Fixes: ca95f802ef51 ("IB/hfi1: Unreserve a reserved request when it is completed") Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-15 16:45:28 +00:00
rvt_qp_wqe_unreserve(qp, flags);
rvt_put_qp_swqe(qp, wqe);
need_completion =
!(flags & RVT_SEND_RESERVE_USED) &&
(!(qp->s_flags & RVT_S_SIGNAL_REQ_WR) ||
(flags & IB_SEND_SIGNALED) ||
status != IB_WC_SUCCESS);
if (need_completion) {
wr_id = wqe->wr.wr_id;
byte_len = wqe->length;
/* above fields required before writing s_last */
}
last = rvt_qp_swqe_incr(qp, qp->s_last);
/* see rvt_qp_is_avail() */
smp_store_release(&qp->s_last, last);
if (need_completion) {
struct ib_wc w = {
.wr_id = wr_id,
.status = status,
.opcode = opcode,
.qp = &qp->ibqp,
.byte_len = byte_len,
};
rvt_send_cq(qp, &w, status != IB_WC_SUCCESS);
}
return last;
}
extern const int ib_rvt_state_ops[];
struct rvt_dev_info;
int rvt_get_rwqe(struct rvt_qp *qp, bool wr_id_only);
void rvt_comm_est(struct rvt_qp *qp);
void rvt_rc_error(struct rvt_qp *qp, enum ib_wc_status err);
unsigned long rvt_rnr_tbl_to_usec(u32 index);
enum hrtimer_restart rvt_rc_rnr_retry(struct hrtimer *t);
void rvt_add_rnr_timer(struct rvt_qp *qp, u32 aeth);
void rvt_del_timers_sync(struct rvt_qp *qp);
void rvt_stop_rc_timers(struct rvt_qp *qp);
void rvt_add_retry_timer_ext(struct rvt_qp *qp, u8 shift);
static inline void rvt_add_retry_timer(struct rvt_qp *qp)
{
rvt_add_retry_timer_ext(qp, 0);
}
void rvt_copy_sge(struct rvt_qp *qp, struct rvt_sge_state *ss,
void *data, u32 length,
bool release, bool copy_last);
void rvt_send_complete(struct rvt_qp *qp, struct rvt_swqe *wqe,
enum ib_wc_status status);
void rvt_ruc_loopback(struct rvt_qp *qp);
/**
* struct rvt_qp_iter - the iterator for QPs
* @qp - the current QP
*
* This structure defines the current iterator
* state for sequenced access to all QPs relative
* to an rvt_dev_info.
*/
struct rvt_qp_iter {
struct rvt_qp *qp;
/* private: backpointer */
struct rvt_dev_info *rdi;
/* private: callback routine */
void (*cb)(struct rvt_qp *qp, u64 v);
/* private: for arg to callback routine */
u64 v;
/* private: number of SMI,GSI QPs for device */
int specials;
/* private: current iterator index */
int n;
};
/**
* ib_cq_tail - Return tail index of cq buffer
* @send_cq - The cq for send
*
* This is called in qp_iter_print to get tail
* of cq buffer.
*/
static inline u32 ib_cq_tail(struct ib_cq *send_cq)
{
struct rvt_cq *cq = ibcq_to_rvtcq(send_cq);
return ibcq_to_rvtcq(send_cq)->ip ?
RDMA_READ_UAPI_ATOMIC(cq->queue->tail) :
ibcq_to_rvtcq(send_cq)->kqueue->tail;
}
/**
* ib_cq_head - Return head index of cq buffer
* @send_cq - The cq for send
*
* This is called in qp_iter_print to get head
* of cq buffer.
*/
static inline u32 ib_cq_head(struct ib_cq *send_cq)
{
struct rvt_cq *cq = ibcq_to_rvtcq(send_cq);
return ibcq_to_rvtcq(send_cq)->ip ?
RDMA_READ_UAPI_ATOMIC(cq->queue->head) :
ibcq_to_rvtcq(send_cq)->kqueue->head;
}
/**
* rvt_free_rq - free memory allocated for rvt_rq struct
* @rvt_rq: request queue data structure
*
* This function should only be called if the rvt_mmap_info()
* has not succeeded.
*/
static inline void rvt_free_rq(struct rvt_rq *rq)
{
kvfree(rq->kwq);
rq->kwq = NULL;
vfree(rq->wq);
rq->wq = NULL;
}
/**
* rvt_to_iport - Get the ibport pointer
* @qp: the qp pointer
*
* This function returns the ibport pointer from the qp pointer.
*/
static inline struct rvt_ibport *rvt_to_iport(struct rvt_qp *qp)
{
struct rvt_dev_info *rdi = ib_to_rvt(qp->ibqp.device);
return rdi->ports[qp->port_num - 1];
}
/**
* rvt_rc_credit_avail - Check if there are enough RC credits for the request
* @qp: the qp
* @wqe: the request
*
* This function returns false when there are not enough credits for the given
* request and true otherwise.
*/
static inline bool rvt_rc_credit_avail(struct rvt_qp *qp, struct rvt_swqe *wqe)
{
lockdep_assert_held(&qp->s_lock);
if (!(qp->s_flags & RVT_S_UNLIMITED_CREDIT) &&
rvt_cmp_msn(wqe->ssn, qp->s_lsn + 1) > 0) {
struct rvt_ibport *rvp = rvt_to_iport(qp);
qp->s_flags |= RVT_S_WAIT_SSN_CREDIT;
rvp->n_rc_crwaits++;
return false;
}
return true;
}
struct rvt_qp_iter *rvt_qp_iter_init(struct rvt_dev_info *rdi,
u64 v,
void (*cb)(struct rvt_qp *qp, u64 v));
int rvt_qp_iter_next(struct rvt_qp_iter *iter);
void rvt_qp_iter(struct rvt_dev_info *rdi,
u64 v,
void (*cb)(struct rvt_qp *qp, u64 v));
void rvt_qp_mr_clean(struct rvt_qp *qp, u32 lkey);
#endif /* DEF_RDMAVT_INCQP_H */