linux/drivers/net/wireless/ath/ath9k/calib.c

1325 lines
37 KiB
C
Raw Normal View History

/*
* Copyright (c) 2008-2009 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "hw.h"
#include "ar9002_phy.h"
/* We can tune this as we go by monitoring really low values */
#define ATH9K_NF_TOO_LOW -60
#define AR9285_CLCAL_REDO_THRESH 1
/* AR5416 may return very high value (like -31 dBm), in those cases the nf
* is incorrect and we should use the static NF value. Later we can try to
* find out why they are reporting these values */
static bool ath9k_hw_nf_in_range(struct ath_hw *ah, s16 nf)
{
if (nf > ATH9K_NF_TOO_LOW) {
ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
"noise floor value detected (%d) is "
"lower than what we think is a "
"reasonable value (%d)\n",
nf, ATH9K_NF_TOO_LOW);
return false;
}
return true;
}
static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer)
{
int16_t nfval;
int16_t sort[ATH9K_NF_CAL_HIST_MAX];
int i, j;
for (i = 0; i < ATH9K_NF_CAL_HIST_MAX; i++)
sort[i] = nfCalBuffer[i];
for (i = 0; i < ATH9K_NF_CAL_HIST_MAX - 1; i++) {
for (j = 1; j < ATH9K_NF_CAL_HIST_MAX - i; j++) {
if (sort[j] > sort[j - 1]) {
nfval = sort[j];
sort[j] = sort[j - 1];
sort[j - 1] = nfval;
}
}
}
nfval = sort[(ATH9K_NF_CAL_HIST_MAX - 1) >> 1];
return nfval;
}
static void ath9k_hw_update_nfcal_hist_buffer(struct ath9k_nfcal_hist *h,
int16_t *nfarray)
{
int i;
for (i = 0; i < NUM_NF_READINGS; i++) {
h[i].nfCalBuffer[h[i].currIndex] = nfarray[i];
if (++h[i].currIndex >= ATH9K_NF_CAL_HIST_MAX)
h[i].currIndex = 0;
if (h[i].invalidNFcount > 0) {
if (nfarray[i] < AR_PHY_CCA_MIN_BAD_VALUE ||
nfarray[i] > AR_PHY_CCA_MAX_HIGH_VALUE) {
h[i].invalidNFcount = ATH9K_NF_CAL_HIST_MAX;
} else {
h[i].invalidNFcount--;
h[i].privNF = nfarray[i];
}
} else {
h[i].privNF =
ath9k_hw_get_nf_hist_mid(h[i].nfCalBuffer);
}
}
return;
}
static void ath9k_hw_do_getnf(struct ath_hw *ah,
int16_t nfarray[NUM_NF_READINGS])
{
struct ath_common *common = ath9k_hw_common(ah);
int16_t nf;
if (AR_SREV_9280_10_OR_LATER(ah))
nf = MS(REG_READ(ah, AR_PHY_CCA), AR9280_PHY_MINCCA_PWR);
else
nf = MS(REG_READ(ah, AR_PHY_CCA), AR_PHY_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ctl] [chain 0] is %d\n", nf);
if (AR_SREV_9271(ah) && (nf >= -114))
nf = -116;
nfarray[0] = nf;
ath9k_hw: fix noisefloor history buffer usage on AR9271 Noisefloor calibration involves querying hardware for samples and storing this information on a history buffer in hardware for actual noisefloor calibration processing in hardware. The history buffer supports collecting information for all Atheros hardware, one history buffer slot for each chain on each channel used for MIMO operation. For current hardware this means one history buffer slot for each chain on both the control (or primary) channel and the extension (or secondary) channel. We know which noisefloor registers to poke for collecting noisefloor data through the chainmask. For AR9285 and AR9271 devices, both 1x1, the chaimmask is defined as 0x9 = 0b0001001. The first four bits represent each chain out of a maximum of 4 chains [0-3] on the primary channel. The last four bits represent each chain on the extension channel. A chainmask of 0x9 therefore indicates chain 1 is active on both the primary and the extension channel. AR9271 only requires collecting and storing noisefloor history buffer data for the first chain on both the control and extension channel (nfarray[0] and nfarray[3]) so fix the code and avoid which reads and writes to the history buffer for the other chains. Since the noisefloor varies depending on the number of chains your device supports also initialize the noisefloor history buffer with reasonable values seen on 1x1 devices such as AR9285. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-17 08:55:19 +00:00
if (!AR_SREV_9285(ah) && !AR_SREV_9271(ah)) {
if (AR_SREV_9280_10_OR_LATER(ah))
nf = MS(REG_READ(ah, AR_PHY_CH1_CCA),
AR9280_PHY_CH1_MINCCA_PWR);
else
nf = MS(REG_READ(ah, AR_PHY_CH1_CCA),
AR_PHY_CH1_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ctl] [chain 1] is %d\n", nf);
nfarray[1] = nf;
if (!AR_SREV_9280(ah) && !AR_SREV_9287(ah)) {
nf = MS(REG_READ(ah, AR_PHY_CH2_CCA),
AR_PHY_CH2_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ctl] [chain 2] is %d\n", nf);
nfarray[2] = nf;
}
}
if (AR_SREV_9280_10_OR_LATER(ah))
nf = MS(REG_READ(ah, AR_PHY_EXT_CCA),
AR9280_PHY_EXT_MINCCA_PWR);
else
nf = MS(REG_READ(ah, AR_PHY_EXT_CCA),
AR_PHY_EXT_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ext] [chain 0] is %d\n", nf);
if (AR_SREV_9271(ah) && (nf >= -114))
nf = -116;
nfarray[3] = nf;
ath9k_hw: fix noisefloor history buffer usage on AR9271 Noisefloor calibration involves querying hardware for samples and storing this information on a history buffer in hardware for actual noisefloor calibration processing in hardware. The history buffer supports collecting information for all Atheros hardware, one history buffer slot for each chain on each channel used for MIMO operation. For current hardware this means one history buffer slot for each chain on both the control (or primary) channel and the extension (or secondary) channel. We know which noisefloor registers to poke for collecting noisefloor data through the chainmask. For AR9285 and AR9271 devices, both 1x1, the chaimmask is defined as 0x9 = 0b0001001. The first four bits represent each chain out of a maximum of 4 chains [0-3] on the primary channel. The last four bits represent each chain on the extension channel. A chainmask of 0x9 therefore indicates chain 1 is active on both the primary and the extension channel. AR9271 only requires collecting and storing noisefloor history buffer data for the first chain on both the control and extension channel (nfarray[0] and nfarray[3]) so fix the code and avoid which reads and writes to the history buffer for the other chains. Since the noisefloor varies depending on the number of chains your device supports also initialize the noisefloor history buffer with reasonable values seen on 1x1 devices such as AR9285. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-17 08:55:19 +00:00
if (!AR_SREV_9285(ah) && !AR_SREV_9271(ah)) {
if (AR_SREV_9280_10_OR_LATER(ah))
nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA),
AR9280_PHY_CH1_EXT_MINCCA_PWR);
else
nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA),
AR_PHY_CH1_EXT_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ext] [chain 1] is %d\n", nf);
nfarray[4] = nf;
if (!AR_SREV_9280(ah) && !AR_SREV_9287(ah)) {
nf = MS(REG_READ(ah, AR_PHY_CH2_EXT_CCA),
AR_PHY_CH2_EXT_MINCCA_PWR);
if (nf & 0x100)
nf = 0 - ((nf ^ 0x1ff) + 1);
ath_print(common, ATH_DBG_CALIBRATE,
"NF calibrated [ext] [chain 2] is %d\n", nf);
nfarray[5] = nf;
}
}
}
static bool getNoiseFloorThresh(struct ath_hw *ah,
enum ieee80211_band band,
int16_t *nft)
{
switch (band) {
case IEEE80211_BAND_5GHZ:
*nft = (int8_t)ah->eep_ops->get_eeprom(ah, EEP_NFTHRESH_5);
break;
case IEEE80211_BAND_2GHZ:
*nft = (int8_t)ah->eep_ops->get_eeprom(ah, EEP_NFTHRESH_2);
break;
default:
BUG_ON(1);
return false;
}
return true;
}
static void ath9k_hw_setup_calibration(struct ath_hw *ah,
struct ath9k_cal_list *currCal)
{
struct ath_common *common = ath9k_hw_common(ah);
REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(0),
AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX,
currCal->calData->calCountMax);
switch (currCal->calData->calType) {
case IQ_MISMATCH_CAL:
REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);
ath_print(common, ATH_DBG_CALIBRATE,
"starting IQ Mismatch Calibration\n");
break;
case ADC_GAIN_CAL:
REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_GAIN);
ath_print(common, ATH_DBG_CALIBRATE,
"starting ADC Gain Calibration\n");
break;
case ADC_DC_CAL:
REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_PER);
ath_print(common, ATH_DBG_CALIBRATE,
"starting ADC DC Calibration\n");
break;
case ADC_DC_INIT_CAL:
REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_INIT);
ath_print(common, ATH_DBG_CALIBRATE,
"starting Init ADC DC Calibration\n");
break;
}
REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4(0),
AR_PHY_TIMING_CTRL4_DO_CAL);
}
static void ath9k_hw_reset_calibration(struct ath_hw *ah,
struct ath9k_cal_list *currCal)
{
int i;
ath9k_hw_setup_calibration(ah, currCal);
currCal->calState = CAL_RUNNING;
for (i = 0; i < AR5416_MAX_CHAINS; i++) {
ah->meas0.sign[i] = 0;
ah->meas1.sign[i] = 0;
ah->meas2.sign[i] = 0;
ah->meas3.sign[i] = 0;
}
ah->cal_samples = 0;
}
static bool ath9k_hw_per_calibration(struct ath_hw *ah,
struct ath9k_channel *ichan,
u8 rxchainmask,
struct ath9k_cal_list *currCal)
{
bool iscaldone = false;
if (currCal->calState == CAL_RUNNING) {
if (!(REG_READ(ah, AR_PHY_TIMING_CTRL4(0)) &
AR_PHY_TIMING_CTRL4_DO_CAL)) {
currCal->calData->calCollect(ah);
ah->cal_samples++;
if (ah->cal_samples >= currCal->calData->calNumSamples) {
int i, numChains = 0;
for (i = 0; i < AR5416_MAX_CHAINS; i++) {
if (rxchainmask & (1 << i))
numChains++;
}
currCal->calData->calPostProc(ah, numChains);
ichan->CalValid |= currCal->calData->calType;
currCal->calState = CAL_DONE;
iscaldone = true;
} else {
ath9k_hw_setup_calibration(ah, currCal);
}
}
} else if (!(ichan->CalValid & currCal->calData->calType)) {
ath9k_hw_reset_calibration(ah, currCal);
}
return iscaldone;
}
/* Assumes you are talking about the currently configured channel */
static bool ath9k_hw_iscal_supported(struct ath_hw *ah,
enum ath9k_cal_types calType)
{
struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
switch (calType & ah->supp_cals) {
case IQ_MISMATCH_CAL: /* Both 2 GHz and 5 GHz support OFDM */
return true;
case ADC_GAIN_CAL:
case ADC_DC_CAL:
if (!(conf->channel->band == IEEE80211_BAND_2GHZ &&
conf_is_ht20(conf)))
return true;
break;
}
return false;
}
static void ath9k_hw_iqcal_collect(struct ath_hw *ah)
{
int i;
for (i = 0; i < AR5416_MAX_CHAINS; i++) {
ah->totalPowerMeasI[i] +=
REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
ah->totalPowerMeasQ[i] +=
REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
ah->totalIqCorrMeas[i] +=
(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
"%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
ah->cal_samples, i, ah->totalPowerMeasI[i],
ah->totalPowerMeasQ[i],
ah->totalIqCorrMeas[i]);
}
}
static void ath9k_hw_adc_gaincal_collect(struct ath_hw *ah)
{
int i;
for (i = 0; i < AR5416_MAX_CHAINS; i++) {
ah->totalAdcIOddPhase[i] +=
REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
ah->totalAdcIEvenPhase[i] +=
REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
ah->totalAdcQOddPhase[i] +=
REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
ah->totalAdcQEvenPhase[i] +=
REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
"%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
"oddq=0x%08x; evenq=0x%08x;\n",
ah->cal_samples, i,
ah->totalAdcIOddPhase[i],
ah->totalAdcIEvenPhase[i],
ah->totalAdcQOddPhase[i],
ah->totalAdcQEvenPhase[i]);
}
}
static void ath9k_hw_adc_dccal_collect(struct ath_hw *ah)
{
int i;
for (i = 0; i < AR5416_MAX_CHAINS; i++) {
ah->totalAdcDcOffsetIOddPhase[i] +=
(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_0(i));
ah->totalAdcDcOffsetIEvenPhase[i] +=
(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
ah->totalAdcDcOffsetQOddPhase[i] +=
(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
ah->totalAdcDcOffsetQEvenPhase[i] +=
(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
"%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
"oddq=0x%08x; evenq=0x%08x;\n",
ah->cal_samples, i,
ah->totalAdcDcOffsetIOddPhase[i],
ah->totalAdcDcOffsetIEvenPhase[i],
ah->totalAdcDcOffsetQOddPhase[i],
ah->totalAdcDcOffsetQEvenPhase[i]);
}
}
static void ath9k_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
{
struct ath_common *common = ath9k_hw_common(ah);
u32 powerMeasQ, powerMeasI, iqCorrMeas;
u32 qCoffDenom, iCoffDenom;
int32_t qCoff, iCoff;
int iqCorrNeg, i;
for (i = 0; i < numChains; i++) {
powerMeasI = ah->totalPowerMeasI[i];
powerMeasQ = ah->totalPowerMeasQ[i];
iqCorrMeas = ah->totalIqCorrMeas[i];
ath_print(common, ATH_DBG_CALIBRATE,
"Starting IQ Cal and Correction for Chain %d\n",
i);
ath_print(common, ATH_DBG_CALIBRATE,
"Orignal: Chn %diq_corr_meas = 0x%08x\n",
i, ah->totalIqCorrMeas[i]);
iqCorrNeg = 0;
if (iqCorrMeas > 0x80000000) {
iqCorrMeas = (0xffffffff - iqCorrMeas) + 1;
iqCorrNeg = 1;
}
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d pwr_meas_i = 0x%08x\n", i, powerMeasI);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d pwr_meas_q = 0x%08x\n", i, powerMeasQ);
ath_print(common, ATH_DBG_CALIBRATE, "iqCorrNeg is 0x%08x\n",
iqCorrNeg);
iCoffDenom = (powerMeasI / 2 + powerMeasQ / 2) / 128;
qCoffDenom = powerMeasQ / 64;
if ((powerMeasQ != 0) && (iCoffDenom != 0) &&
(qCoffDenom != 0)) {
iCoff = iqCorrMeas / iCoffDenom;
qCoff = powerMeasI / qCoffDenom - 64;
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d iCoff = 0x%08x\n", i, iCoff);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d qCoff = 0x%08x\n", i, qCoff);
iCoff = iCoff & 0x3f;
ath_print(common, ATH_DBG_CALIBRATE,
"New: Chn %d iCoff = 0x%08x\n", i, iCoff);
if (iqCorrNeg == 0x0)
iCoff = 0x40 - iCoff;
if (qCoff > 15)
qCoff = 15;
else if (qCoff <= -16)
qCoff = 16;
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d : iCoff = 0x%x qCoff = 0x%x\n",
i, iCoff, qCoff);
REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF,
iCoff);
REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF,
qCoff);
ath_print(common, ATH_DBG_CALIBRATE,
"IQ Cal and Correction done for Chain %d\n",
i);
}
}
REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4(0),
AR_PHY_TIMING_CTRL4_IQCORR_ENABLE);
}
static void ath9k_hw_adc_gaincal_calibrate(struct ath_hw *ah, u8 numChains)
{
struct ath_common *common = ath9k_hw_common(ah);
u32 iOddMeasOffset, iEvenMeasOffset, qOddMeasOffset, qEvenMeasOffset;
u32 qGainMismatch, iGainMismatch, val, i;
for (i = 0; i < numChains; i++) {
iOddMeasOffset = ah->totalAdcIOddPhase[i];
iEvenMeasOffset = ah->totalAdcIEvenPhase[i];
qOddMeasOffset = ah->totalAdcQOddPhase[i];
qEvenMeasOffset = ah->totalAdcQEvenPhase[i];
ath_print(common, ATH_DBG_CALIBRATE,
"Starting ADC Gain Cal for Chain %d\n", i);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d pwr_meas_odd_i = 0x%08x\n", i,
iOddMeasOffset);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d pwr_meas_even_i = 0x%08x\n", i,
iEvenMeasOffset);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d pwr_meas_odd_q = 0x%08x\n", i,
qOddMeasOffset);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d pwr_meas_even_q = 0x%08x\n", i,
qEvenMeasOffset);
if (iOddMeasOffset != 0 && qEvenMeasOffset != 0) {
iGainMismatch =
((iEvenMeasOffset * 32) /
iOddMeasOffset) & 0x3f;
qGainMismatch =
((qOddMeasOffset * 32) /
qEvenMeasOffset) & 0x3f;
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d gain_mismatch_i = 0x%08x\n", i,
iGainMismatch);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d gain_mismatch_q = 0x%08x\n", i,
qGainMismatch);
val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
val &= 0xfffff000;
val |= (qGainMismatch) | (iGainMismatch << 6);
REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
ath_print(common, ATH_DBG_CALIBRATE,
"ADC Gain Cal done for Chain %d\n", i);
}
}
REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0),
REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0)) |
AR_PHY_NEW_ADC_GAIN_CORR_ENABLE);
}
static void ath9k_hw_adc_dccal_calibrate(struct ath_hw *ah, u8 numChains)
{
struct ath_common *common = ath9k_hw_common(ah);
u32 iOddMeasOffset, iEvenMeasOffset, val, i;
int32_t qOddMeasOffset, qEvenMeasOffset, qDcMismatch, iDcMismatch;
const struct ath9k_percal_data *calData =
ah->cal_list_curr->calData;
u32 numSamples =
(1 << (calData->calCountMax + 5)) * calData->calNumSamples;
for (i = 0; i < numChains; i++) {
iOddMeasOffset = ah->totalAdcDcOffsetIOddPhase[i];
iEvenMeasOffset = ah->totalAdcDcOffsetIEvenPhase[i];
qOddMeasOffset = ah->totalAdcDcOffsetQOddPhase[i];
qEvenMeasOffset = ah->totalAdcDcOffsetQEvenPhase[i];
ath_print(common, ATH_DBG_CALIBRATE,
"Starting ADC DC Offset Cal for Chain %d\n", i);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d pwr_meas_odd_i = %d\n", i,
iOddMeasOffset);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d pwr_meas_even_i = %d\n", i,
iEvenMeasOffset);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d pwr_meas_odd_q = %d\n", i,
qOddMeasOffset);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d pwr_meas_even_q = %d\n", i,
qEvenMeasOffset);
iDcMismatch = (((iEvenMeasOffset - iOddMeasOffset) * 2) /
numSamples) & 0x1ff;
qDcMismatch = (((qOddMeasOffset - qEvenMeasOffset) * 2) /
numSamples) & 0x1ff;
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d dc_offset_mismatch_i = 0x%08x\n", i,
iDcMismatch);
ath_print(common, ATH_DBG_CALIBRATE,
"Chn %d dc_offset_mismatch_q = 0x%08x\n", i,
qDcMismatch);
val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
val &= 0xc0000fff;
val |= (qDcMismatch << 12) | (iDcMismatch << 21);
REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
ath_print(common, ATH_DBG_CALIBRATE,
"ADC DC Offset Cal done for Chain %d\n", i);
}
REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0),
REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0)) |
AR_PHY_NEW_ADC_DC_OFFSET_CORR_ENABLE);
}
/* This is done for the currently configured channel */
bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &common->hw->conf;
struct ath9k_cal_list *currCal = ah->cal_list_curr;
if (!ah->curchan)
return true;
if (!AR_SREV_9100(ah) && !AR_SREV_9160_10_OR_LATER(ah))
return true;
if (currCal == NULL)
return true;
if (currCal->calState != CAL_DONE) {
ath_print(common, ATH_DBG_CALIBRATE,
"Calibration state incorrect, %d\n",
currCal->calState);
return true;
}
if (!ath9k_hw_iscal_supported(ah, currCal->calData->calType))
return true;
ath_print(common, ATH_DBG_CALIBRATE,
"Resetting Cal %d state for channel %u\n",
currCal->calData->calType, conf->channel->center_freq);
ah->curchan->CalValid &= ~currCal->calData->calType;
currCal->calState = CAL_WAITING;
return false;
}
EXPORT_SYMBOL(ath9k_hw_reset_calvalid);
void ath9k_hw_start_nfcal(struct ath_hw *ah)
{
REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_ENABLE_NF);
REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
}
void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
{
struct ath9k_nfcal_hist *h;
int i, j;
int32_t val;
const u32 ar5416_cca_regs[6] = {
AR_PHY_CCA,
AR_PHY_CH1_CCA,
AR_PHY_CH2_CCA,
AR_PHY_EXT_CCA,
AR_PHY_CH1_EXT_CCA,
AR_PHY_CH2_EXT_CCA
};
u8 chainmask, rx_chain_status;
rx_chain_status = REG_READ(ah, AR_PHY_RX_CHAINMASK);
ath9k_hw: fix noisefloor history buffer usage on AR9271 Noisefloor calibration involves querying hardware for samples and storing this information on a history buffer in hardware for actual noisefloor calibration processing in hardware. The history buffer supports collecting information for all Atheros hardware, one history buffer slot for each chain on each channel used for MIMO operation. For current hardware this means one history buffer slot for each chain on both the control (or primary) channel and the extension (or secondary) channel. We know which noisefloor registers to poke for collecting noisefloor data through the chainmask. For AR9285 and AR9271 devices, both 1x1, the chaimmask is defined as 0x9 = 0b0001001. The first four bits represent each chain out of a maximum of 4 chains [0-3] on the primary channel. The last four bits represent each chain on the extension channel. A chainmask of 0x9 therefore indicates chain 1 is active on both the primary and the extension channel. AR9271 only requires collecting and storing noisefloor history buffer data for the first chain on both the control and extension channel (nfarray[0] and nfarray[3]) so fix the code and avoid which reads and writes to the history buffer for the other chains. Since the noisefloor varies depending on the number of chains your device supports also initialize the noisefloor history buffer with reasonable values seen on 1x1 devices such as AR9285. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-17 08:55:19 +00:00
if (AR_SREV_9285(ah) || AR_SREV_9271(ah))
chainmask = 0x9;
else if (AR_SREV_9280(ah) || AR_SREV_9287(ah)) {
if ((rx_chain_status & 0x2) || (rx_chain_status & 0x4))
chainmask = 0x1B;
else
chainmask = 0x09;
} else {
if (rx_chain_status & 0x4)
chainmask = 0x3F;
else if (rx_chain_status & 0x2)
chainmask = 0x1B;
else
chainmask = 0x09;
}
h = ah->nfCalHist;
for (i = 0; i < NUM_NF_READINGS; i++) {
if (chainmask & (1 << i)) {
val = REG_READ(ah, ar5416_cca_regs[i]);
val &= 0xFFFFFE00;
val |= (((u32) (h[i].privNF) << 1) & 0x1ff);
REG_WRITE(ah, ar5416_cca_regs[i], val);
}
}
REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_ENABLE_NF);
REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
for (j = 0; j < 5; j++) {
if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
AR_PHY_AGC_CONTROL_NF) == 0)
break;
udelay(50);
}
for (i = 0; i < NUM_NF_READINGS; i++) {
if (chainmask & (1 << i)) {
val = REG_READ(ah, ar5416_cca_regs[i]);
val &= 0xFFFFFE00;
val |= (((u32) (-50) << 1) & 0x1ff);
REG_WRITE(ah, ar5416_cca_regs[i], val);
}
}
}
int16_t ath9k_hw_getnf(struct ath_hw *ah,
struct ath9k_channel *chan)
{
struct ath_common *common = ath9k_hw_common(ah);
int16_t nf, nfThresh;
int16_t nfarray[NUM_NF_READINGS] = { 0 };
struct ath9k_nfcal_hist *h;
struct ieee80211_channel *c = chan->chan;
chan->channelFlags &= (~CHANNEL_CW_INT);
if (REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) {
ath_print(common, ATH_DBG_CALIBRATE,
"NF did not complete in calibration window\n");
nf = 0;
chan->rawNoiseFloor = nf;
return chan->rawNoiseFloor;
} else {
ath9k_hw_do_getnf(ah, nfarray);
nf = nfarray[0];
if (getNoiseFloorThresh(ah, c->band, &nfThresh)
&& nf > nfThresh) {
ath_print(common, ATH_DBG_CALIBRATE,
"noise floor failed detected; "
"detected %d, threshold %d\n",
nf, nfThresh);
chan->channelFlags |= CHANNEL_CW_INT;
}
}
h = ah->nfCalHist;
ath9k_hw_update_nfcal_hist_buffer(h, nfarray);
chan->rawNoiseFloor = h[0].privNF;
return chan->rawNoiseFloor;
}
void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah)
{
int i, j;
ath9k: Manipulate and report the correct RSSI RSSI reported by the RX descriptor requires little manipulation. Manipulate and report the correct RSSI to the stack. This will fix the improper signal levels reported by iwconfig iw dev wlanX station dump. Also the Link Quality reported seems to be varying (falls to zero also sometimes) when iperf is run from STA to AP. Also use the default noise floor for now as the one reported during the caliberation seems to be wrong. The Signal and Link Quality before this patch (taken while TX is in progress from STA to AP) 09:59:13.285428037 Link Quality=29/70 Signal level=-81 dBm 09:59:13.410660084 Link Quality=20/70 Signal level=-90 dBm 09:59:13.586864392 Link Quality=21/70 Signal level=-89 dBm 09:59:13.710296281 Link Quality=21/70 Signal level=-89 dBm 09:59:13.821683064 Link Quality=25/70 Signal level=-85 dBm 09:59:13.933402989 Link Quality=24/70 Signal level=-86 dBm 09:59:14.045839276 Link Quality=26/70 Signal level=-84 dBm 09:59:14.193926673 Link Quality=23/70 Signal level=-87 dBm 09:59:14.306230262 Link Quality=31/70 Signal level=-79 dBm 09:59:14.419459667 Link Quality=26/70 Signal level=-84 dBm 09:59:14.530711167 Link Quality=37/70 Signal level=-73 dBm 09:59:14.642593962 Link Quality=29/70 Signal level=-81 dBm 09:59:14.754361169 Link Quality=21/70 Signal level=-89 dBm 09:59:14.866217355 Link Quality=21/70 Signal level=-89 dBm 09:59:14.976963623 Link Quality=28/70 Signal level=-82 dBm 09:59:15.089149809 Link Quality=26/70 Signal level=-84 dBm 09:59:15.205039887 Link Quality=27/70 Signal level=-83 dBm 09:59:15.316368003 Link Quality=23/70 Signal level=-87 dBm 09:59:15.427684036 Link Quality=36/70 Signal level=-74 dBm 09:59:15.539756380 Link Quality=21/70 Signal level=-89 dBm 09:59:15.650549093 Link Quality=22/70 Signal level=-88 dBm 09:59:15.761171672 Link Quality=32/70 Signal level=-78 dBm 09:59:15.872793750 Link Quality=23/70 Signal level=-87 dBm 09:59:15.984421694 Link Quality=22/70 Signal level=-88 dBm 09:59:16.097315093 Link Quality=21/70 Signal level=-89 dBm The link quality and signal level after this patch (take while TX is in progress from STA to AP) 17:21:25.627848091 Link Quality=65/70 Signal level=-45 dBm 17:21:25.762805607 Link Quality=65/70 Signal level=-45 dBm 17:21:25.875521888 Link Quality=66/70 Signal level=-44 dBm 17:21:25.987468448 Link Quality=66/70 Signal level=-44 dBm 17:21:26.100628151 Link Quality=66/70 Signal level=-44 dBm 17:21:26.213129671 Link Quality=66/70 Signal level=-44 dBm 17:21:26.324923070 Link Quality=65/70 Signal level=-45 dBm 17:21:26.436831357 Link Quality=65/70 Signal level=-45 dBm 17:21:26.610356973 Link Quality=65/70 Signal level=-45 dBm 17:21:26.723340047 Link Quality=65/70 Signal level=-45 dBm 17:21:26.835715293 Link Quality=64/70 Signal level=-46 dBm 17:21:26.949542748 Link Quality=64/70 Signal level=-46 dBm 17:21:27.062261613 Link Quality=65/70 Signal level=-45 dBm 17:21:27.174511563 Link Quality=64/70 Signal level=-46 dBm 17:21:27.287616232 Link Quality=64/70 Signal level=-46 dBm 17:21:27.400598119 Link Quality=64/70 Signal level=-46 dBm 17:21:27.511381404 Link Quality=64/70 Signal level=-46 dBm 17:21:27.624530421 Link Quality=65/70 Signal level=-45 dBm 17:21:27.737807109 Link Quality=64/70 Signal level=-46 dBm 17:21:27.850861352 Link Quality=65/70 Signal level=-45 dBm 17:21:27.963369436 Link Quality=64/70 Signal level=-46 dBm 17:21:28.076582289 Link Quality=64/70 Signal level=-46 dBm Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-15 00:17:07 +00:00
s16 noise_floor;
if (AR_SREV_9280(ah))
noise_floor = AR_PHY_CCA_MAX_AR9280_GOOD_VALUE;
ath9k_hw: fix noisefloor history buffer usage on AR9271 Noisefloor calibration involves querying hardware for samples and storing this information on a history buffer in hardware for actual noisefloor calibration processing in hardware. The history buffer supports collecting information for all Atheros hardware, one history buffer slot for each chain on each channel used for MIMO operation. For current hardware this means one history buffer slot for each chain on both the control (or primary) channel and the extension (or secondary) channel. We know which noisefloor registers to poke for collecting noisefloor data through the chainmask. For AR9285 and AR9271 devices, both 1x1, the chaimmask is defined as 0x9 = 0b0001001. The first four bits represent each chain out of a maximum of 4 chains [0-3] on the primary channel. The last four bits represent each chain on the extension channel. A chainmask of 0x9 therefore indicates chain 1 is active on both the primary and the extension channel. AR9271 only requires collecting and storing noisefloor history buffer data for the first chain on both the control and extension channel (nfarray[0] and nfarray[3]) so fix the code and avoid which reads and writes to the history buffer for the other chains. Since the noisefloor varies depending on the number of chains your device supports also initialize the noisefloor history buffer with reasonable values seen on 1x1 devices such as AR9285. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-17 08:55:19 +00:00
else if (AR_SREV_9285(ah) || AR_SREV_9271(ah))
ath9k: Manipulate and report the correct RSSI RSSI reported by the RX descriptor requires little manipulation. Manipulate and report the correct RSSI to the stack. This will fix the improper signal levels reported by iwconfig iw dev wlanX station dump. Also the Link Quality reported seems to be varying (falls to zero also sometimes) when iperf is run from STA to AP. Also use the default noise floor for now as the one reported during the caliberation seems to be wrong. The Signal and Link Quality before this patch (taken while TX is in progress from STA to AP) 09:59:13.285428037 Link Quality=29/70 Signal level=-81 dBm 09:59:13.410660084 Link Quality=20/70 Signal level=-90 dBm 09:59:13.586864392 Link Quality=21/70 Signal level=-89 dBm 09:59:13.710296281 Link Quality=21/70 Signal level=-89 dBm 09:59:13.821683064 Link Quality=25/70 Signal level=-85 dBm 09:59:13.933402989 Link Quality=24/70 Signal level=-86 dBm 09:59:14.045839276 Link Quality=26/70 Signal level=-84 dBm 09:59:14.193926673 Link Quality=23/70 Signal level=-87 dBm 09:59:14.306230262 Link Quality=31/70 Signal level=-79 dBm 09:59:14.419459667 Link Quality=26/70 Signal level=-84 dBm 09:59:14.530711167 Link Quality=37/70 Signal level=-73 dBm 09:59:14.642593962 Link Quality=29/70 Signal level=-81 dBm 09:59:14.754361169 Link Quality=21/70 Signal level=-89 dBm 09:59:14.866217355 Link Quality=21/70 Signal level=-89 dBm 09:59:14.976963623 Link Quality=28/70 Signal level=-82 dBm 09:59:15.089149809 Link Quality=26/70 Signal level=-84 dBm 09:59:15.205039887 Link Quality=27/70 Signal level=-83 dBm 09:59:15.316368003 Link Quality=23/70 Signal level=-87 dBm 09:59:15.427684036 Link Quality=36/70 Signal level=-74 dBm 09:59:15.539756380 Link Quality=21/70 Signal level=-89 dBm 09:59:15.650549093 Link Quality=22/70 Signal level=-88 dBm 09:59:15.761171672 Link Quality=32/70 Signal level=-78 dBm 09:59:15.872793750 Link Quality=23/70 Signal level=-87 dBm 09:59:15.984421694 Link Quality=22/70 Signal level=-88 dBm 09:59:16.097315093 Link Quality=21/70 Signal level=-89 dBm The link quality and signal level after this patch (take while TX is in progress from STA to AP) 17:21:25.627848091 Link Quality=65/70 Signal level=-45 dBm 17:21:25.762805607 Link Quality=65/70 Signal level=-45 dBm 17:21:25.875521888 Link Quality=66/70 Signal level=-44 dBm 17:21:25.987468448 Link Quality=66/70 Signal level=-44 dBm 17:21:26.100628151 Link Quality=66/70 Signal level=-44 dBm 17:21:26.213129671 Link Quality=66/70 Signal level=-44 dBm 17:21:26.324923070 Link Quality=65/70 Signal level=-45 dBm 17:21:26.436831357 Link Quality=65/70 Signal level=-45 dBm 17:21:26.610356973 Link Quality=65/70 Signal level=-45 dBm 17:21:26.723340047 Link Quality=65/70 Signal level=-45 dBm 17:21:26.835715293 Link Quality=64/70 Signal level=-46 dBm 17:21:26.949542748 Link Quality=64/70 Signal level=-46 dBm 17:21:27.062261613 Link Quality=65/70 Signal level=-45 dBm 17:21:27.174511563 Link Quality=64/70 Signal level=-46 dBm 17:21:27.287616232 Link Quality=64/70 Signal level=-46 dBm 17:21:27.400598119 Link Quality=64/70 Signal level=-46 dBm 17:21:27.511381404 Link Quality=64/70 Signal level=-46 dBm 17:21:27.624530421 Link Quality=65/70 Signal level=-45 dBm 17:21:27.737807109 Link Quality=64/70 Signal level=-46 dBm 17:21:27.850861352 Link Quality=65/70 Signal level=-45 dBm 17:21:27.963369436 Link Quality=64/70 Signal level=-46 dBm 17:21:28.076582289 Link Quality=64/70 Signal level=-46 dBm Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-15 00:17:07 +00:00
noise_floor = AR_PHY_CCA_MAX_AR9285_GOOD_VALUE;
else if (AR_SREV_9287(ah))
noise_floor = AR_PHY_CCA_MAX_AR9287_GOOD_VALUE;
ath9k: Manipulate and report the correct RSSI RSSI reported by the RX descriptor requires little manipulation. Manipulate and report the correct RSSI to the stack. This will fix the improper signal levels reported by iwconfig iw dev wlanX station dump. Also the Link Quality reported seems to be varying (falls to zero also sometimes) when iperf is run from STA to AP. Also use the default noise floor for now as the one reported during the caliberation seems to be wrong. The Signal and Link Quality before this patch (taken while TX is in progress from STA to AP) 09:59:13.285428037 Link Quality=29/70 Signal level=-81 dBm 09:59:13.410660084 Link Quality=20/70 Signal level=-90 dBm 09:59:13.586864392 Link Quality=21/70 Signal level=-89 dBm 09:59:13.710296281 Link Quality=21/70 Signal level=-89 dBm 09:59:13.821683064 Link Quality=25/70 Signal level=-85 dBm 09:59:13.933402989 Link Quality=24/70 Signal level=-86 dBm 09:59:14.045839276 Link Quality=26/70 Signal level=-84 dBm 09:59:14.193926673 Link Quality=23/70 Signal level=-87 dBm 09:59:14.306230262 Link Quality=31/70 Signal level=-79 dBm 09:59:14.419459667 Link Quality=26/70 Signal level=-84 dBm 09:59:14.530711167 Link Quality=37/70 Signal level=-73 dBm 09:59:14.642593962 Link Quality=29/70 Signal level=-81 dBm 09:59:14.754361169 Link Quality=21/70 Signal level=-89 dBm 09:59:14.866217355 Link Quality=21/70 Signal level=-89 dBm 09:59:14.976963623 Link Quality=28/70 Signal level=-82 dBm 09:59:15.089149809 Link Quality=26/70 Signal level=-84 dBm 09:59:15.205039887 Link Quality=27/70 Signal level=-83 dBm 09:59:15.316368003 Link Quality=23/70 Signal level=-87 dBm 09:59:15.427684036 Link Quality=36/70 Signal level=-74 dBm 09:59:15.539756380 Link Quality=21/70 Signal level=-89 dBm 09:59:15.650549093 Link Quality=22/70 Signal level=-88 dBm 09:59:15.761171672 Link Quality=32/70 Signal level=-78 dBm 09:59:15.872793750 Link Quality=23/70 Signal level=-87 dBm 09:59:15.984421694 Link Quality=22/70 Signal level=-88 dBm 09:59:16.097315093 Link Quality=21/70 Signal level=-89 dBm The link quality and signal level after this patch (take while TX is in progress from STA to AP) 17:21:25.627848091 Link Quality=65/70 Signal level=-45 dBm 17:21:25.762805607 Link Quality=65/70 Signal level=-45 dBm 17:21:25.875521888 Link Quality=66/70 Signal level=-44 dBm 17:21:25.987468448 Link Quality=66/70 Signal level=-44 dBm 17:21:26.100628151 Link Quality=66/70 Signal level=-44 dBm 17:21:26.213129671 Link Quality=66/70 Signal level=-44 dBm 17:21:26.324923070 Link Quality=65/70 Signal level=-45 dBm 17:21:26.436831357 Link Quality=65/70 Signal level=-45 dBm 17:21:26.610356973 Link Quality=65/70 Signal level=-45 dBm 17:21:26.723340047 Link Quality=65/70 Signal level=-45 dBm 17:21:26.835715293 Link Quality=64/70 Signal level=-46 dBm 17:21:26.949542748 Link Quality=64/70 Signal level=-46 dBm 17:21:27.062261613 Link Quality=65/70 Signal level=-45 dBm 17:21:27.174511563 Link Quality=64/70 Signal level=-46 dBm 17:21:27.287616232 Link Quality=64/70 Signal level=-46 dBm 17:21:27.400598119 Link Quality=64/70 Signal level=-46 dBm 17:21:27.511381404 Link Quality=64/70 Signal level=-46 dBm 17:21:27.624530421 Link Quality=65/70 Signal level=-45 dBm 17:21:27.737807109 Link Quality=64/70 Signal level=-46 dBm 17:21:27.850861352 Link Quality=65/70 Signal level=-45 dBm 17:21:27.963369436 Link Quality=64/70 Signal level=-46 dBm 17:21:28.076582289 Link Quality=64/70 Signal level=-46 dBm Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-15 00:17:07 +00:00
else
noise_floor = AR_PHY_CCA_MAX_AR5416_GOOD_VALUE;
for (i = 0; i < NUM_NF_READINGS; i++) {
ah->nfCalHist[i].currIndex = 0;
ath9k: Manipulate and report the correct RSSI RSSI reported by the RX descriptor requires little manipulation. Manipulate and report the correct RSSI to the stack. This will fix the improper signal levels reported by iwconfig iw dev wlanX station dump. Also the Link Quality reported seems to be varying (falls to zero also sometimes) when iperf is run from STA to AP. Also use the default noise floor for now as the one reported during the caliberation seems to be wrong. The Signal and Link Quality before this patch (taken while TX is in progress from STA to AP) 09:59:13.285428037 Link Quality=29/70 Signal level=-81 dBm 09:59:13.410660084 Link Quality=20/70 Signal level=-90 dBm 09:59:13.586864392 Link Quality=21/70 Signal level=-89 dBm 09:59:13.710296281 Link Quality=21/70 Signal level=-89 dBm 09:59:13.821683064 Link Quality=25/70 Signal level=-85 dBm 09:59:13.933402989 Link Quality=24/70 Signal level=-86 dBm 09:59:14.045839276 Link Quality=26/70 Signal level=-84 dBm 09:59:14.193926673 Link Quality=23/70 Signal level=-87 dBm 09:59:14.306230262 Link Quality=31/70 Signal level=-79 dBm 09:59:14.419459667 Link Quality=26/70 Signal level=-84 dBm 09:59:14.530711167 Link Quality=37/70 Signal level=-73 dBm 09:59:14.642593962 Link Quality=29/70 Signal level=-81 dBm 09:59:14.754361169 Link Quality=21/70 Signal level=-89 dBm 09:59:14.866217355 Link Quality=21/70 Signal level=-89 dBm 09:59:14.976963623 Link Quality=28/70 Signal level=-82 dBm 09:59:15.089149809 Link Quality=26/70 Signal level=-84 dBm 09:59:15.205039887 Link Quality=27/70 Signal level=-83 dBm 09:59:15.316368003 Link Quality=23/70 Signal level=-87 dBm 09:59:15.427684036 Link Quality=36/70 Signal level=-74 dBm 09:59:15.539756380 Link Quality=21/70 Signal level=-89 dBm 09:59:15.650549093 Link Quality=22/70 Signal level=-88 dBm 09:59:15.761171672 Link Quality=32/70 Signal level=-78 dBm 09:59:15.872793750 Link Quality=23/70 Signal level=-87 dBm 09:59:15.984421694 Link Quality=22/70 Signal level=-88 dBm 09:59:16.097315093 Link Quality=21/70 Signal level=-89 dBm The link quality and signal level after this patch (take while TX is in progress from STA to AP) 17:21:25.627848091 Link Quality=65/70 Signal level=-45 dBm 17:21:25.762805607 Link Quality=65/70 Signal level=-45 dBm 17:21:25.875521888 Link Quality=66/70 Signal level=-44 dBm 17:21:25.987468448 Link Quality=66/70 Signal level=-44 dBm 17:21:26.100628151 Link Quality=66/70 Signal level=-44 dBm 17:21:26.213129671 Link Quality=66/70 Signal level=-44 dBm 17:21:26.324923070 Link Quality=65/70 Signal level=-45 dBm 17:21:26.436831357 Link Quality=65/70 Signal level=-45 dBm 17:21:26.610356973 Link Quality=65/70 Signal level=-45 dBm 17:21:26.723340047 Link Quality=65/70 Signal level=-45 dBm 17:21:26.835715293 Link Quality=64/70 Signal level=-46 dBm 17:21:26.949542748 Link Quality=64/70 Signal level=-46 dBm 17:21:27.062261613 Link Quality=65/70 Signal level=-45 dBm 17:21:27.174511563 Link Quality=64/70 Signal level=-46 dBm 17:21:27.287616232 Link Quality=64/70 Signal level=-46 dBm 17:21:27.400598119 Link Quality=64/70 Signal level=-46 dBm 17:21:27.511381404 Link Quality=64/70 Signal level=-46 dBm 17:21:27.624530421 Link Quality=65/70 Signal level=-45 dBm 17:21:27.737807109 Link Quality=64/70 Signal level=-46 dBm 17:21:27.850861352 Link Quality=65/70 Signal level=-45 dBm 17:21:27.963369436 Link Quality=64/70 Signal level=-46 dBm 17:21:28.076582289 Link Quality=64/70 Signal level=-46 dBm Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-15 00:17:07 +00:00
ah->nfCalHist[i].privNF = noise_floor;
ah->nfCalHist[i].invalidNFcount =
AR_PHY_CCA_FILTERWINDOW_LENGTH;
for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++) {
ath9k: Manipulate and report the correct RSSI RSSI reported by the RX descriptor requires little manipulation. Manipulate and report the correct RSSI to the stack. This will fix the improper signal levels reported by iwconfig iw dev wlanX station dump. Also the Link Quality reported seems to be varying (falls to zero also sometimes) when iperf is run from STA to AP. Also use the default noise floor for now as the one reported during the caliberation seems to be wrong. The Signal and Link Quality before this patch (taken while TX is in progress from STA to AP) 09:59:13.285428037 Link Quality=29/70 Signal level=-81 dBm 09:59:13.410660084 Link Quality=20/70 Signal level=-90 dBm 09:59:13.586864392 Link Quality=21/70 Signal level=-89 dBm 09:59:13.710296281 Link Quality=21/70 Signal level=-89 dBm 09:59:13.821683064 Link Quality=25/70 Signal level=-85 dBm 09:59:13.933402989 Link Quality=24/70 Signal level=-86 dBm 09:59:14.045839276 Link Quality=26/70 Signal level=-84 dBm 09:59:14.193926673 Link Quality=23/70 Signal level=-87 dBm 09:59:14.306230262 Link Quality=31/70 Signal level=-79 dBm 09:59:14.419459667 Link Quality=26/70 Signal level=-84 dBm 09:59:14.530711167 Link Quality=37/70 Signal level=-73 dBm 09:59:14.642593962 Link Quality=29/70 Signal level=-81 dBm 09:59:14.754361169 Link Quality=21/70 Signal level=-89 dBm 09:59:14.866217355 Link Quality=21/70 Signal level=-89 dBm 09:59:14.976963623 Link Quality=28/70 Signal level=-82 dBm 09:59:15.089149809 Link Quality=26/70 Signal level=-84 dBm 09:59:15.205039887 Link Quality=27/70 Signal level=-83 dBm 09:59:15.316368003 Link Quality=23/70 Signal level=-87 dBm 09:59:15.427684036 Link Quality=36/70 Signal level=-74 dBm 09:59:15.539756380 Link Quality=21/70 Signal level=-89 dBm 09:59:15.650549093 Link Quality=22/70 Signal level=-88 dBm 09:59:15.761171672 Link Quality=32/70 Signal level=-78 dBm 09:59:15.872793750 Link Quality=23/70 Signal level=-87 dBm 09:59:15.984421694 Link Quality=22/70 Signal level=-88 dBm 09:59:16.097315093 Link Quality=21/70 Signal level=-89 dBm The link quality and signal level after this patch (take while TX is in progress from STA to AP) 17:21:25.627848091 Link Quality=65/70 Signal level=-45 dBm 17:21:25.762805607 Link Quality=65/70 Signal level=-45 dBm 17:21:25.875521888 Link Quality=66/70 Signal level=-44 dBm 17:21:25.987468448 Link Quality=66/70 Signal level=-44 dBm 17:21:26.100628151 Link Quality=66/70 Signal level=-44 dBm 17:21:26.213129671 Link Quality=66/70 Signal level=-44 dBm 17:21:26.324923070 Link Quality=65/70 Signal level=-45 dBm 17:21:26.436831357 Link Quality=65/70 Signal level=-45 dBm 17:21:26.610356973 Link Quality=65/70 Signal level=-45 dBm 17:21:26.723340047 Link Quality=65/70 Signal level=-45 dBm 17:21:26.835715293 Link Quality=64/70 Signal level=-46 dBm 17:21:26.949542748 Link Quality=64/70 Signal level=-46 dBm 17:21:27.062261613 Link Quality=65/70 Signal level=-45 dBm 17:21:27.174511563 Link Quality=64/70 Signal level=-46 dBm 17:21:27.287616232 Link Quality=64/70 Signal level=-46 dBm 17:21:27.400598119 Link Quality=64/70 Signal level=-46 dBm 17:21:27.511381404 Link Quality=64/70 Signal level=-46 dBm 17:21:27.624530421 Link Quality=65/70 Signal level=-45 dBm 17:21:27.737807109 Link Quality=64/70 Signal level=-46 dBm 17:21:27.850861352 Link Quality=65/70 Signal level=-45 dBm 17:21:27.963369436 Link Quality=64/70 Signal level=-46 dBm 17:21:28.076582289 Link Quality=64/70 Signal level=-46 dBm Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-15 00:17:07 +00:00
ah->nfCalHist[i].nfCalBuffer[j] = noise_floor;
}
}
}
s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan)
{
s16 nf;
if (chan->rawNoiseFloor == 0)
nf = -96;
else
nf = chan->rawNoiseFloor;
if (!ath9k_hw_nf_in_range(ah, nf))
nf = ATH_DEFAULT_NOISE_FLOOR;
return nf;
}
EXPORT_SYMBOL(ath9k_hw_getchan_noise);
static void ath9k_olc_temp_compensation_9287(struct ath_hw *ah)
{
u32 rddata;
int32_t delta, currPDADC, slope;
rddata = REG_READ(ah, AR_PHY_TX_PWRCTRL4);
currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT);
if (ah->initPDADC == 0 || currPDADC == 0) {
/*
* Zero value indicates that no frames have been transmitted yet,
* can't do temperature compensation until frames are transmitted.
*/
return;
} else {
slope = ah->eep_ops->get_eeprom(ah, EEP_TEMPSENSE_SLOPE);
if (slope == 0) { /* to avoid divide by zero case */
delta = 0;
} else {
delta = ((currPDADC - ah->initPDADC)*4) / slope;
}
REG_RMW_FIELD(ah, AR_PHY_CH0_TX_PWRCTRL11,
AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
REG_RMW_FIELD(ah, AR_PHY_CH1_TX_PWRCTRL11,
AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
}
}
static void ath9k_olc_temp_compensation(struct ath_hw *ah)
{
u32 rddata, i;
int delta, currPDADC, regval;
if (OLC_FOR_AR9287_10_LATER) {
ath9k_olc_temp_compensation_9287(ah);
} else {
rddata = REG_READ(ah, AR_PHY_TX_PWRCTRL4);
currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT);
if (ah->initPDADC == 0 || currPDADC == 0) {
return;
} else {
if (ah->eep_ops->get_eeprom(ah, EEP_DAC_HPWR_5G))
delta = (currPDADC - ah->initPDADC + 4) / 8;
else
delta = (currPDADC - ah->initPDADC + 5) / 10;
if (delta != ah->PDADCdelta) {
ah->PDADCdelta = delta;
for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) {
regval = ah->originalGain[i] - delta;
if (regval < 0)
regval = 0;
REG_RMW_FIELD(ah,
AR_PHY_TX_GAIN_TBL1 + i * 4,
AR_PHY_TX_GAIN, regval);
}
}
}
}
}
static void ath9k_hw_9271_pa_cal(struct ath_hw *ah, bool is_reset)
{
u32 regVal;
unsigned int i;
u32 regList [][2] = {
{ 0x786c, 0 },
{ 0x7854, 0 },
{ 0x7820, 0 },
{ 0x7824, 0 },
{ 0x7868, 0 },
{ 0x783c, 0 },
{ 0x7838, 0 } ,
{ 0x7828, 0 } ,
};
for (i = 0; i < ARRAY_SIZE(regList); i++)
regList[i][1] = REG_READ(ah, regList[i][0]);
regVal = REG_READ(ah, 0x7834);
regVal &= (~(0x1));
REG_WRITE(ah, 0x7834, regVal);
regVal = REG_READ(ah, 0x9808);
regVal |= (0x1 << 27);
REG_WRITE(ah, 0x9808, regVal);
/* 786c,b23,1, pwddac=1 */
REG_RMW_FIELD(ah, AR9285_AN_TOP3, AR9285_AN_TOP3_PWDDAC, 1);
/* 7854, b5,1, pdrxtxbb=1 */
REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDRXTXBB1, 1);
/* 7854, b7,1, pdv2i=1 */
REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDV2I, 1);
/* 7854, b8,1, pddacinterface=1 */
REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDDACIF, 1);
/* 7824,b12,0, offcal=0 */
REG_RMW_FIELD(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL, 0);
/* 7838, b1,0, pwddb=0 */
REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB, 0);
/* 7820,b11,0, enpacal=0 */
REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL, 0);
/* 7820,b25,1, pdpadrv1=0 */
REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1, 0);
/* 7820,b24,0, pdpadrv2=0 */
REG_RMW_FIELD(ah, AR9285_AN_RF2G1,AR9285_AN_RF2G1_PDPADRV2,0);
/* 7820,b23,0, pdpaout=0 */
REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT, 0);
/* 783c,b14-16,7, padrvgn2tab_0=7 */
REG_RMW_FIELD(ah, AR9285_AN_RF2G8,AR9285_AN_RF2G8_PADRVGN2TAB0, 7);
/*
* 7838,b29-31,0, padrvgn1tab_0=0
* does not matter since we turn it off
*/
REG_RMW_FIELD(ah, AR9285_AN_RF2G7,AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9271_AN_RF2G3_CCOMP, 0xfff);
/* Set:
* localmode=1,bmode=1,bmoderxtx=1,synthon=1,
* txon=1,paon=1,oscon=1,synthon_force=1
*/
REG_WRITE(ah, AR9285_AN_TOP2, 0xca0358a0);
udelay(30);
REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9271_AN_RF2G6_OFFS, 0);
/* find off_6_1; */
for (i = 6; i > 0; i--) {
regVal = REG_READ(ah, 0x7834);
regVal |= (1 << (20 + i));
REG_WRITE(ah, 0x7834, regVal);
udelay(1);
//regVal = REG_READ(ah, 0x7834);
regVal &= (~(0x1 << (20 + i)));
regVal |= (MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9)
<< (20 + i));
REG_WRITE(ah, 0x7834, regVal);
}
regVal = (regVal >>20) & 0x7f;
/* Update PA cal info */
if ((!is_reset) && (ah->pacal_info.prev_offset == regVal)) {
if (ah->pacal_info.max_skipcount < MAX_PACAL_SKIPCOUNT)
ah->pacal_info.max_skipcount =
2 * ah->pacal_info.max_skipcount;
ah->pacal_info.skipcount = ah->pacal_info.max_skipcount;
} else {
ah->pacal_info.max_skipcount = 1;
ah->pacal_info.skipcount = 0;
ah->pacal_info.prev_offset = regVal;
}
regVal = REG_READ(ah, 0x7834);
regVal |= 0x1;
REG_WRITE(ah, 0x7834, regVal);
regVal = REG_READ(ah, 0x9808);
regVal &= (~(0x1 << 27));
REG_WRITE(ah, 0x9808, regVal);
for (i = 0; i < ARRAY_SIZE(regList); i++)
REG_WRITE(ah, regList[i][0], regList[i][1]);
}
static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah, bool is_reset)
{
struct ath_common *common = ath9k_hw_common(ah);
u32 regVal;
int i, offset, offs_6_1, offs_0;
u32 ccomp_org, reg_field;
u32 regList[][2] = {
{ 0x786c, 0 },
{ 0x7854, 0 },
{ 0x7820, 0 },
{ 0x7824, 0 },
{ 0x7868, 0 },
{ 0x783c, 0 },
{ 0x7838, 0 },
};
ath_print(common, ATH_DBG_CALIBRATE, "Running PA Calibration\n");
/* PA CAL is not needed for high power solution */
if (ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE) ==
AR5416_EEP_TXGAIN_HIGH_POWER)
return;
if (AR_SREV_9285_11(ah)) {
REG_WRITE(ah, AR9285_AN_TOP4, (AR9285_AN_TOP4_DEFAULT | 0x14));
udelay(10);
}
for (i = 0; i < ARRAY_SIZE(regList); i++)
regList[i][1] = REG_READ(ah, regList[i][0]);
regVal = REG_READ(ah, 0x7834);
regVal &= (~(0x1));
REG_WRITE(ah, 0x7834, regVal);
regVal = REG_READ(ah, 0x9808);
regVal |= (0x1 << 27);
REG_WRITE(ah, 0x9808, regVal);
REG_RMW_FIELD(ah, AR9285_AN_TOP3, AR9285_AN_TOP3_PWDDAC, 1);
REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDRXTXBB1, 1);
REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDV2I, 1);
REG_RMW_FIELD(ah, AR9285_AN_RXTXBB1, AR9285_AN_RXTXBB1_PDDACIF, 1);
REG_RMW_FIELD(ah, AR9285_AN_RF2G2, AR9285_AN_RF2G2_OFFCAL, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PWDDB, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_ENPACAL, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV1, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPADRV2, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G1, AR9285_AN_RF2G1_PDPAOUT, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G8, AR9285_AN_RF2G8_PADRVGN2TAB0, 7);
REG_RMW_FIELD(ah, AR9285_AN_RF2G7, AR9285_AN_RF2G7_PADRVGN2TAB0, 0);
ccomp_org = MS(REG_READ(ah, AR9285_AN_RF2G6), AR9285_AN_RF2G6_CCOMP);
REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9285_AN_RF2G6_CCOMP, 0xf);
REG_WRITE(ah, AR9285_AN_TOP2, 0xca0358a0);
udelay(30);
REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9285_AN_RF2G6_OFFS, 0);
REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9285_AN_RF2G3_PDVCCOMP, 0);
for (i = 6; i > 0; i--) {
regVal = REG_READ(ah, 0x7834);
regVal |= (1 << (19 + i));
REG_WRITE(ah, 0x7834, regVal);
udelay(1);
regVal = REG_READ(ah, 0x7834);
regVal &= (~(0x1 << (19 + i)));
reg_field = MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9);
regVal |= (reg_field << (19 + i));
REG_WRITE(ah, 0x7834, regVal);
}
REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9285_AN_RF2G3_PDVCCOMP, 1);
udelay(1);
reg_field = MS(REG_READ(ah, AR9285_AN_RF2G9), AR9285_AN_RXTXBB1_SPARE9);
REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9285_AN_RF2G3_PDVCCOMP, reg_field);
offs_6_1 = MS(REG_READ(ah, AR9285_AN_RF2G6), AR9285_AN_RF2G6_OFFS);
offs_0 = MS(REG_READ(ah, AR9285_AN_RF2G3), AR9285_AN_RF2G3_PDVCCOMP);
offset = (offs_6_1<<1) | offs_0;
offset = offset - 0;
offs_6_1 = offset>>1;
offs_0 = offset & 1;
if ((!is_reset) && (ah->pacal_info.prev_offset == offset)) {
if (ah->pacal_info.max_skipcount < MAX_PACAL_SKIPCOUNT)
ah->pacal_info.max_skipcount =
2 * ah->pacal_info.max_skipcount;
ah->pacal_info.skipcount = ah->pacal_info.max_skipcount;
} else {
ah->pacal_info.max_skipcount = 1;
ah->pacal_info.skipcount = 0;
ah->pacal_info.prev_offset = offset;
}
REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9285_AN_RF2G6_OFFS, offs_6_1);
REG_RMW_FIELD(ah, AR9285_AN_RF2G3, AR9285_AN_RF2G3_PDVCCOMP, offs_0);
regVal = REG_READ(ah, 0x7834);
regVal |= 0x1;
REG_WRITE(ah, 0x7834, regVal);
regVal = REG_READ(ah, 0x9808);
regVal &= (~(0x1 << 27));
REG_WRITE(ah, 0x9808, regVal);
for (i = 0; i < ARRAY_SIZE(regList); i++)
REG_WRITE(ah, regList[i][0], regList[i][1]);
REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9285_AN_RF2G6_CCOMP, ccomp_org);
if (AR_SREV_9285_11(ah))
REG_WRITE(ah, AR9285_AN_TOP4, AR9285_AN_TOP4_DEFAULT);
}
bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
u8 rxchainmask, bool longcal)
{
bool iscaldone = true;
struct ath9k_cal_list *currCal = ah->cal_list_curr;
if (currCal &&
(currCal->calState == CAL_RUNNING ||
currCal->calState == CAL_WAITING)) {
iscaldone = ath9k_hw_per_calibration(ah, chan,
rxchainmask, currCal);
if (iscaldone) {
ah->cal_list_curr = currCal = currCal->calNext;
if (currCal->calState == CAL_WAITING) {
iscaldone = false;
ath9k_hw_reset_calibration(ah, currCal);
}
}
}
/* Do NF cal only at longer intervals */
if (longcal) {
/* Do periodic PAOffset Cal */
if (AR_SREV_9271(ah)) {
if (!ah->pacal_info.skipcount)
ath9k_hw_9271_pa_cal(ah, false);
else
ah->pacal_info.skipcount--;
} else if (AR_SREV_9285_11_OR_LATER(ah)) {
if (!ah->pacal_info.skipcount)
ath9k_hw_9285_pa_cal(ah, false);
else
ah->pacal_info.skipcount--;
}
if (OLC_FOR_AR9280_20_LATER || OLC_FOR_AR9287_10_LATER)
ath9k_olc_temp_compensation(ah);
/* Get the value from the previous NF cal and update history buffer */
ath9k_hw_getnf(ah, chan);
/*
* Load the NF from history buffer of the current channel.
* NF is slow time-variant, so it is OK to use a historical value.
*/
ath9k_hw_loadnf(ah, ah->curchan);
ath9k_hw_start_nfcal(ah);
}
return iscaldone;
}
EXPORT_SYMBOL(ath9k_hw_calibrate);
/* Carrier leakage Calibration fix */
static bool ar9285_cl_cal(struct ath_hw *ah, struct ath9k_channel *chan)
{
struct ath_common *common = ath9k_hw_common(ah);
REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
if (IS_CHAN_HT20(chan)) {
REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_PARALLEL_CAL_ENABLE);
REG_SET_BIT(ah, AR_PHY_TURBO, AR_PHY_FC_DYN2040_EN);
REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_FLTR_CAL);
REG_CLR_BIT(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_CAL_ENABLE);
REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL);
if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_CAL, 0, AH_WAIT_TIMEOUT)) {
ath_print(common, ATH_DBG_CALIBRATE, "offset "
"calibration failed to complete in "
"1ms; noisy ??\n");
return false;
}
REG_CLR_BIT(ah, AR_PHY_TURBO, AR_PHY_FC_DYN2040_EN);
REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_PARALLEL_CAL_ENABLE);
REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
}
REG_CLR_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
REG_SET_BIT(ah, AR_PHY_TPCRG1, AR_PHY_TPCRG1_PD_CAL_ENABLE);
REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL);
if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
0, AH_WAIT_TIMEOUT)) {
ath_print(common, ATH_DBG_CALIBRATE, "offset calibration "
"failed to complete in 1ms; noisy ??\n");
return false;
}
REG_SET_BIT(ah, AR_PHY_ADC_CTL, AR_PHY_ADC_CTL_OFF_PWDADC);
REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_FLTR_CAL);
return true;
}
static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
{
int i;
u_int32_t txgain_max;
u_int32_t clc_gain, gain_mask = 0, clc_num = 0;
u_int32_t reg_clc_I0, reg_clc_Q0;
u_int32_t i0_num = 0;
u_int32_t q0_num = 0;
u_int32_t total_num = 0;
u_int32_t reg_rf2g5_org;
bool retv = true;
if (!(ar9285_cl_cal(ah, chan)))
return false;
txgain_max = MS(REG_READ(ah, AR_PHY_TX_PWRCTRL7),
AR_PHY_TX_PWRCTRL_TX_GAIN_TAB_MAX);
for (i = 0; i < (txgain_max+1); i++) {
clc_gain = (REG_READ(ah, (AR_PHY_TX_GAIN_TBL1+(i<<2))) &
AR_PHY_TX_GAIN_CLC) >> AR_PHY_TX_GAIN_CLC_S;
if (!(gain_mask & (1 << clc_gain))) {
gain_mask |= (1 << clc_gain);
clc_num++;
}
}
for (i = 0; i < clc_num; i++) {
reg_clc_I0 = (REG_READ(ah, (AR_PHY_CLC_TBL1 + (i << 2)))
& AR_PHY_CLC_I0) >> AR_PHY_CLC_I0_S;
reg_clc_Q0 = (REG_READ(ah, (AR_PHY_CLC_TBL1 + (i << 2)))
& AR_PHY_CLC_Q0) >> AR_PHY_CLC_Q0_S;
if (reg_clc_I0 == 0)
i0_num++;
if (reg_clc_Q0 == 0)
q0_num++;
}
total_num = i0_num + q0_num;
if (total_num > AR9285_CLCAL_REDO_THRESH) {
reg_rf2g5_org = REG_READ(ah, AR9285_RF2G5);
if (AR_SREV_9285E_20(ah)) {
REG_WRITE(ah, AR9285_RF2G5,
(reg_rf2g5_org & AR9285_RF2G5_IC50TX) |
AR9285_RF2G5_IC50TX_XE_SET);
} else {
REG_WRITE(ah, AR9285_RF2G5,
(reg_rf2g5_org & AR9285_RF2G5_IC50TX) |
AR9285_RF2G5_IC50TX_SET);
}
retv = ar9285_cl_cal(ah, chan);
REG_WRITE(ah, AR9285_RF2G5, reg_rf2g5_org);
}
return retv;
}
bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
{
struct ath_common *common = ath9k_hw_common(ah);
if (AR_SREV_9271(ah) || AR_SREV_9285_12_OR_LATER(ah)) {
if (!ar9285_clc(ah, chan))
return false;
} else {
if (AR_SREV_9280_10_OR_LATER(ah)) {
if (!AR_SREV_9287_10_OR_LATER(ah))
REG_CLR_BIT(ah, AR_PHY_ADC_CTL,
AR_PHY_ADC_CTL_OFF_PWDADC);
REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_FLTR_CAL);
}
/* Calibrate the AGC */
REG_WRITE(ah, AR_PHY_AGC_CONTROL,
REG_READ(ah, AR_PHY_AGC_CONTROL) |
AR_PHY_AGC_CONTROL_CAL);
/* Poll for offset calibration complete */
if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
0, AH_WAIT_TIMEOUT)) {
ath_print(common, ATH_DBG_CALIBRATE,
"offset calibration failed to "
"complete in 1ms; noisy environment?\n");
return false;
}
if (AR_SREV_9280_10_OR_LATER(ah)) {
if (!AR_SREV_9287_10_OR_LATER(ah))
REG_SET_BIT(ah, AR_PHY_ADC_CTL,
AR_PHY_ADC_CTL_OFF_PWDADC);
REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_FLTR_CAL);
}
}
/* Do PA Calibration */
if (AR_SREV_9271(ah))
ath9k_hw_9271_pa_cal(ah, true);
else if (AR_SREV_9285_11_OR_LATER(ah))
ath9k_hw_9285_pa_cal(ah, true);
/* Do NF Calibration after DC offset and other calibrations */
REG_WRITE(ah, AR_PHY_AGC_CONTROL,
REG_READ(ah, AR_PHY_AGC_CONTROL) | AR_PHY_AGC_CONTROL_NF);
ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
/* Enable IQ, ADC Gain and ADC DC offset CALs */
if (AR_SREV_9100(ah) || AR_SREV_9160_10_OR_LATER(ah)) {
if (ath9k_hw_iscal_supported(ah, ADC_GAIN_CAL)) {
INIT_CAL(&ah->adcgain_caldata);
INSERT_CAL(ah, &ah->adcgain_caldata);
ath_print(common, ATH_DBG_CALIBRATE,
"enabling ADC Gain Calibration.\n");
}
if (ath9k_hw_iscal_supported(ah, ADC_DC_CAL)) {
INIT_CAL(&ah->adcdc_caldata);
INSERT_CAL(ah, &ah->adcdc_caldata);
ath_print(common, ATH_DBG_CALIBRATE,
"enabling ADC DC Calibration.\n");
}
if (ath9k_hw_iscal_supported(ah, IQ_MISMATCH_CAL)) {
INIT_CAL(&ah->iq_caldata);
INSERT_CAL(ah, &ah->iq_caldata);
ath_print(common, ATH_DBG_CALIBRATE,
"enabling IQ Calibration.\n");
}
ah->cal_list_curr = ah->cal_list;
if (ah->cal_list_curr)
ath9k_hw_reset_calibration(ah, ah->cal_list_curr);
}
chan->CalValid = 0;
return true;
}
const struct ath9k_percal_data iq_cal_multi_sample = {
IQ_MISMATCH_CAL,
MAX_CAL_SAMPLES,
PER_MIN_LOG_COUNT,
ath9k_hw_iqcal_collect,
ath9k_hw_iqcalibrate
};
const struct ath9k_percal_data iq_cal_single_sample = {
IQ_MISMATCH_CAL,
MIN_CAL_SAMPLES,
PER_MAX_LOG_COUNT,
ath9k_hw_iqcal_collect,
ath9k_hw_iqcalibrate
};
const struct ath9k_percal_data adc_gain_cal_multi_sample = {
ADC_GAIN_CAL,
MAX_CAL_SAMPLES,
PER_MIN_LOG_COUNT,
ath9k_hw_adc_gaincal_collect,
ath9k_hw_adc_gaincal_calibrate
};
const struct ath9k_percal_data adc_gain_cal_single_sample = {
ADC_GAIN_CAL,
MIN_CAL_SAMPLES,
PER_MAX_LOG_COUNT,
ath9k_hw_adc_gaincal_collect,
ath9k_hw_adc_gaincal_calibrate
};
const struct ath9k_percal_data adc_dc_cal_multi_sample = {
ADC_DC_CAL,
MAX_CAL_SAMPLES,
PER_MIN_LOG_COUNT,
ath9k_hw_adc_dccal_collect,
ath9k_hw_adc_dccal_calibrate
};
const struct ath9k_percal_data adc_dc_cal_single_sample = {
ADC_DC_CAL,
MIN_CAL_SAMPLES,
PER_MAX_LOG_COUNT,
ath9k_hw_adc_dccal_collect,
ath9k_hw_adc_dccal_calibrate
};
const struct ath9k_percal_data adc_init_dc_cal = {
ADC_DC_INIT_CAL,
MIN_CAL_SAMPLES,
INIT_LOG_COUNT,
ath9k_hw_adc_dccal_collect,
ath9k_hw_adc_dccal_calibrate
};