filter: bpf_asm: add minimal bpf asm tool
There are a couple of valid use cases for a minimal low-level bpf asm
like tool, for example, using/linking to libpcap is not an option, the
required BPF filters use Linux extensions that are not supported by
libpcap's compiler, a filter might be more complex and not cleanly
implementable with libpcap's compiler, particular filter codes should
be optimized differently than libpcap's internal BPF compiler does,
or for security audits of emitted BPF JIT code for prepared set of BPF
instructions resp. BPF JIT compiler development in general.
Then, in such cases writing such a filter in low-level syntax can be
an good alternative, for example, xt_bpf and cls_bpf users might have
requirements that could result in more complex filter code, or one that
cannot be expressed with libpcap (e.g. different return codes in
cls_bpf for flowids on various BPF code paths).
Moreover, BPF JIT implementors may wish to manually write test cases
in order to verify the resulting JIT image, and thus need low-level
access to BPF code generation as well. Therefore, complete the available
toolchain for BPF with this small bpf_asm helper tool for the tools/net/
directory. These 3 complementary minimal helper tools round up and
facilitate BPF development.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11 22:43:44 +00:00
|
|
|
/*
|
|
|
|
* BPF asm code lexer
|
|
|
|
*
|
|
|
|
* This program is free software; you can distribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published
|
|
|
|
* by the Free Software Foundation; either version 2 of the License,
|
|
|
|
* or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* Syntax kept close to:
|
|
|
|
*
|
|
|
|
* Steven McCanne and Van Jacobson. 1993. The BSD packet filter: a new
|
|
|
|
* architecture for user-level packet capture. In Proceedings of the
|
|
|
|
* USENIX Winter 1993 Conference Proceedings on USENIX Winter 1993
|
|
|
|
* Conference Proceedings (USENIX'93). USENIX Association, Berkeley,
|
|
|
|
* CA, USA, 2-2.
|
|
|
|
*
|
|
|
|
* Copyright 2013 Daniel Borkmann <borkmann@redhat.com>
|
|
|
|
* Licensed under the GNU General Public License, version 2.0 (GPLv2)
|
|
|
|
*/
|
|
|
|
|
|
|
|
%{
|
|
|
|
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <stdint.h>
|
|
|
|
#include <stdlib.h>
|
2016-02-22 10:02:40 +00:00
|
|
|
#include <string.h>
|
|
|
|
|
|
|
|
#include <linux/filter.h>
|
filter: bpf_asm: add minimal bpf asm tool
There are a couple of valid use cases for a minimal low-level bpf asm
like tool, for example, using/linking to libpcap is not an option, the
required BPF filters use Linux extensions that are not supported by
libpcap's compiler, a filter might be more complex and not cleanly
implementable with libpcap's compiler, particular filter codes should
be optimized differently than libpcap's internal BPF compiler does,
or for security audits of emitted BPF JIT code for prepared set of BPF
instructions resp. BPF JIT compiler development in general.
Then, in such cases writing such a filter in low-level syntax can be
an good alternative, for example, xt_bpf and cls_bpf users might have
requirements that could result in more complex filter code, or one that
cannot be expressed with libpcap (e.g. different return codes in
cls_bpf for flowids on various BPF code paths).
Moreover, BPF JIT implementors may wish to manually write test cases
in order to verify the resulting JIT image, and thus need low-level
access to BPF code generation as well. Therefore, complete the available
toolchain for BPF with this small bpf_asm helper tool for the tools/net/
directory. These 3 complementary minimal helper tools round up and
facilitate BPF development.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11 22:43:44 +00:00
|
|
|
|
|
|
|
#include "bpf_exp.yacc.h"
|
|
|
|
|
|
|
|
extern void yyerror(const char *str);
|
|
|
|
|
|
|
|
%}
|
|
|
|
|
|
|
|
%option align
|
|
|
|
%option ecs
|
|
|
|
|
|
|
|
%option nounput
|
|
|
|
%option noreject
|
|
|
|
%option noinput
|
|
|
|
%option noyywrap
|
|
|
|
|
|
|
|
%option 8bit
|
|
|
|
%option caseless
|
|
|
|
%option yylineno
|
|
|
|
|
|
|
|
%%
|
|
|
|
|
|
|
|
"ldb" { return OP_LDB; }
|
|
|
|
"ldh" { return OP_LDH; }
|
|
|
|
"ld" { return OP_LD; }
|
|
|
|
"ldi" { return OP_LDI; }
|
|
|
|
"ldx" { return OP_LDX; }
|
|
|
|
"ldxi" { return OP_LDXI; }
|
|
|
|
"ldxb" { return OP_LDXB; }
|
|
|
|
"st" { return OP_ST; }
|
|
|
|
"stx" { return OP_STX; }
|
|
|
|
"jmp" { return OP_JMP; }
|
|
|
|
"ja" { return OP_JMP; }
|
|
|
|
"jeq" { return OP_JEQ; }
|
|
|
|
"jneq" { return OP_JNEQ; }
|
|
|
|
"jne" { return OP_JNEQ; }
|
|
|
|
"jlt" { return OP_JLT; }
|
|
|
|
"jle" { return OP_JLE; }
|
|
|
|
"jgt" { return OP_JGT; }
|
|
|
|
"jge" { return OP_JGE; }
|
|
|
|
"jset" { return OP_JSET; }
|
|
|
|
"add" { return OP_ADD; }
|
|
|
|
"sub" { return OP_SUB; }
|
|
|
|
"mul" { return OP_MUL; }
|
|
|
|
"div" { return OP_DIV; }
|
|
|
|
"mod" { return OP_MOD; }
|
|
|
|
"neg" { return OP_NEG; }
|
|
|
|
"and" { return OP_AND; }
|
|
|
|
"xor" { return OP_XOR; }
|
|
|
|
"or" { return OP_OR; }
|
|
|
|
"lsh" { return OP_LSH; }
|
|
|
|
"rsh" { return OP_RSH; }
|
|
|
|
"ret" { return OP_RET; }
|
|
|
|
"tax" { return OP_TAX; }
|
|
|
|
"txa" { return OP_TXA; }
|
|
|
|
|
|
|
|
"#"?("len") { return K_PKT_LEN; }
|
2016-02-22 10:02:40 +00:00
|
|
|
|
|
|
|
"#"?("proto") {
|
|
|
|
yylval.number = SKF_AD_PROTOCOL;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("type") {
|
|
|
|
yylval.number = SKF_AD_PKTTYPE;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("poff") {
|
|
|
|
yylval.number = SKF_AD_PAY_OFFSET;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("ifidx") {
|
|
|
|
yylval.number = SKF_AD_IFINDEX;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("nla") {
|
|
|
|
yylval.number = SKF_AD_NLATTR;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("nlan") {
|
|
|
|
yylval.number = SKF_AD_NLATTR_NEST;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("mark") {
|
|
|
|
yylval.number = SKF_AD_MARK;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("queue") {
|
|
|
|
yylval.number = SKF_AD_QUEUE;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("hatype") {
|
|
|
|
yylval.number = SKF_AD_HATYPE;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("rxhash") {
|
|
|
|
yylval.number = SKF_AD_RXHASH;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("cpu") {
|
|
|
|
yylval.number = SKF_AD_CPU;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("vlan_tci") {
|
|
|
|
yylval.number = SKF_AD_VLAN_TAG;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("vlan_pr") {
|
|
|
|
yylval.number = SKF_AD_VLAN_TAG_PRESENT;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("vlan_avail") {
|
|
|
|
yylval.number = SKF_AD_VLAN_TAG_PRESENT;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("vlan_tpid") {
|
|
|
|
yylval.number = SKF_AD_VLAN_TPID;
|
|
|
|
return extension;
|
|
|
|
}
|
|
|
|
"#"?("rand") {
|
|
|
|
yylval.number = SKF_AD_RANDOM;
|
|
|
|
return extension;
|
|
|
|
}
|
filter: bpf_asm: add minimal bpf asm tool
There are a couple of valid use cases for a minimal low-level bpf asm
like tool, for example, using/linking to libpcap is not an option, the
required BPF filters use Linux extensions that are not supported by
libpcap's compiler, a filter might be more complex and not cleanly
implementable with libpcap's compiler, particular filter codes should
be optimized differently than libpcap's internal BPF compiler does,
or for security audits of emitted BPF JIT code for prepared set of BPF
instructions resp. BPF JIT compiler development in general.
Then, in such cases writing such a filter in low-level syntax can be
an good alternative, for example, xt_bpf and cls_bpf users might have
requirements that could result in more complex filter code, or one that
cannot be expressed with libpcap (e.g. different return codes in
cls_bpf for flowids on various BPF code paths).
Moreover, BPF JIT implementors may wish to manually write test cases
in order to verify the resulting JIT image, and thus need low-level
access to BPF code generation as well. Therefore, complete the available
toolchain for BPF with this small bpf_asm helper tool for the tools/net/
directory. These 3 complementary minimal helper tools round up and
facilitate BPF development.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11 22:43:44 +00:00
|
|
|
|
|
|
|
":" { return ':'; }
|
|
|
|
"," { return ','; }
|
|
|
|
"#" { return '#'; }
|
|
|
|
"%" { return '%'; }
|
|
|
|
"[" { return '['; }
|
|
|
|
"]" { return ']'; }
|
|
|
|
"(" { return '('; }
|
|
|
|
")" { return ')'; }
|
|
|
|
"x" { return 'x'; }
|
|
|
|
"a" { return 'a'; }
|
|
|
|
"+" { return '+'; }
|
|
|
|
"M" { return 'M'; }
|
|
|
|
"*" { return '*'; }
|
|
|
|
"&" { return '&'; }
|
|
|
|
|
|
|
|
([0][x][a-fA-F0-9]+) {
|
|
|
|
yylval.number = strtoul(yytext, NULL, 16);
|
|
|
|
return number;
|
|
|
|
}
|
|
|
|
([0][b][0-1]+) {
|
|
|
|
yylval.number = strtol(yytext + 2, NULL, 2);
|
|
|
|
return number;
|
|
|
|
}
|
|
|
|
(([0])|([-+]?[1-9][0-9]*)) {
|
|
|
|
yylval.number = strtol(yytext, NULL, 10);
|
|
|
|
return number;
|
|
|
|
}
|
|
|
|
([0][0-9]+) {
|
|
|
|
yylval.number = strtol(yytext + 1, NULL, 8);
|
|
|
|
return number;
|
|
|
|
}
|
|
|
|
[a-zA-Z_][a-zA-Z0-9_]+ {
|
|
|
|
yylval.label = strdup(yytext);
|
|
|
|
return label;
|
|
|
|
}
|
|
|
|
|
|
|
|
"/*"([^\*]|\*[^/])*"*/" { /* NOP */ }
|
|
|
|
";"[^\n]* { /* NOP */ }
|
|
|
|
^#.* { /* NOP */ }
|
|
|
|
[ \t]+ { /* NOP */ }
|
|
|
|
[ \n]+ { /* NOP */ }
|
|
|
|
|
|
|
|
. {
|
|
|
|
printf("unknown character \'%s\'", yytext);
|
|
|
|
yyerror("lex unknown character");
|
|
|
|
}
|
|
|
|
|
|
|
|
%%
|