linux/drivers/media/platform/vsp1/vsp1_lif.c

158 lines
4.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* vsp1_lif.c -- R-Car VSP1 LCD Controller Interface
*
* Copyright (C) 2013-2014 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*/
#include <linux/device.h>
#include <linux/gfp.h>
#include <media/v4l2-subdev.h>
#include "vsp1.h"
#include "vsp1_dl.h"
#include "vsp1_lif.h"
#define LIF_MIN_SIZE 2U
#define LIF_MAX_SIZE 8190U
/* -----------------------------------------------------------------------------
* Device Access
*/
static inline void vsp1_lif_write(struct vsp1_lif *lif, struct vsp1_dl_list *dl,
u32 reg, u32 data)
{
vsp1_dl_list_write(dl, reg + lif->entity.index * VI6_LIF_OFFSET, data);
}
/* -----------------------------------------------------------------------------
* V4L2 Subdevice Operations
*/
static const unsigned int lif_codes[] = {
MEDIA_BUS_FMT_ARGB8888_1X32,
MEDIA_BUS_FMT_AYUV8_1X32,
};
static int lif_enum_mbus_code(struct v4l2_subdev *subdev,
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 09:47:54 +00:00
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
{
return vsp1_subdev_enum_mbus_code(subdev, cfg, code, lif_codes,
ARRAY_SIZE(lif_codes));
}
static int lif_enum_frame_size(struct v4l2_subdev *subdev,
[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-04 09:47:54 +00:00
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_frame_size_enum *fse)
{
return vsp1_subdev_enum_frame_size(subdev, cfg, fse, LIF_MIN_SIZE,
LIF_MIN_SIZE, LIF_MAX_SIZE,
LIF_MAX_SIZE);
}
static int lif_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
return vsp1_subdev_set_pad_format(subdev, cfg, fmt, lif_codes,
ARRAY_SIZE(lif_codes),
LIF_MIN_SIZE, LIF_MIN_SIZE,
LIF_MAX_SIZE, LIF_MAX_SIZE);
}
static const struct v4l2_subdev_pad_ops lif_pad_ops = {
.init_cfg = vsp1_entity_init_cfg,
.enum_mbus_code = lif_enum_mbus_code,
.enum_frame_size = lif_enum_frame_size,
.get_fmt = vsp1_subdev_get_pad_format,
.set_fmt = lif_set_format,
};
static const struct v4l2_subdev_ops lif_ops = {
.pad = &lif_pad_ops,
};
/* -----------------------------------------------------------------------------
* VSP1 Entity Operations
*/
static void lif_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
const struct v4l2_mbus_framefmt *format;
struct vsp1_lif *lif = to_lif(&entity->subdev);
unsigned int hbth = 1300;
unsigned int obth = 400;
unsigned int lbth = 200;
if (params != VSP1_ENTITY_PARAMS_INIT)
[media] v4l: vsp1: Support runtime modification of controls Controls are applied to the hardware in the configure operation of the VSP entities, which is only called when starting the video stream. To enable runtime modification of controls we need to call the configure operations for every frame. Doing so is currently not safe, as most parameters shouldn't be modified during streaming. Furthermore the configure operation can sleep, preventing it from being called from the frame completion interrupt handler for the next frame. Fix this by adding an argument to the configure operation to tell entities whether to perform a full configuration (as done now) or a partial runtime configuration. In the latter case the operation will only configure the subset of parameters related to runtime-configurable controls, and won't be allowed to sleep when doing so. Because partial reconfiguration can depend on parameters computed when performing a full configuration, the core guarantees that the configure operation will always be called with full and partial modes in that order at stream start. Entities thus don't have to duplicate configuration steps in the full and partial code paths. This change affects the VSP driver core only, all entities return immediately from the configure operation when called for a partial runtime configuration. Entities will be modified one by one in further commits. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-11 07:07:56 +00:00
return;
format = vsp1_entity_get_pad_format(&lif->entity, lif->entity.config,
LIF_PAD_SOURCE);
obth = min(obth, (format->width + 1) / 2 * format->height - 4);
vsp1_lif_write(lif, dl, VI6_LIF_CSBTH,
(hbth << VI6_LIF_CSBTH_HBTH_SHIFT) |
(lbth << VI6_LIF_CSBTH_LBTH_SHIFT));
vsp1_lif_write(lif, dl, VI6_LIF_CTRL,
(obth << VI6_LIF_CTRL_OBTH_SHIFT) |
(format->code == 0 ? VI6_LIF_CTRL_CFMT : 0) |
VI6_LIF_CTRL_REQSEL | VI6_LIF_CTRL_LIF_EN);
/*
* On R-Car V3M the LIF0 buffer attribute register has to be set to a
* non-default value to guarantee proper operation (otherwise artifacts
* may appear on the output). The value required by the manual is not
* explained but is likely a buffer size or threshold.
*/
if ((entity->vsp1->version & VI6_IP_VERSION_MASK) ==
(VI6_IP_VERSION_MODEL_VSPD_V3 | VI6_IP_VERSION_SOC_V3M))
vsp1_lif_write(lif, dl, VI6_LIF_LBA,
VI6_LIF_LBA_LBA0 |
(1536 << VI6_LIF_LBA_LBA1_SHIFT));
}
static const struct vsp1_entity_operations lif_entity_ops = {
.configure = lif_configure,
};
/* -----------------------------------------------------------------------------
* Initialization and Cleanup
*/
struct vsp1_lif *vsp1_lif_create(struct vsp1_device *vsp1, unsigned int index)
{
struct vsp1_lif *lif;
int ret;
lif = devm_kzalloc(vsp1->dev, sizeof(*lif), GFP_KERNEL);
if (lif == NULL)
return ERR_PTR(-ENOMEM);
lif->entity.ops = &lif_entity_ops;
lif->entity.type = VSP1_ENTITY_LIF;
lif->entity.index = index;
/*
* The LIF is never exposed to userspace, but media entity registration
* requires a function to be set. Use PROC_VIDEO_PIXEL_FORMATTER just to
* avoid triggering a WARN_ON(), the value won't be seen anywhere.
*/
ret = vsp1_entity_init(vsp1, &lif->entity, "lif", 2, &lif_ops,
MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER);
if (ret < 0)
return ERR_PTR(ret);
return lif;
}