leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b3e76c44a5
linux/arch/arm/mach-at91/soc.h

78 lines
1.7 KiB
C
Raw Normal View History

at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 07:28:34 +00:00
/*
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Under GPLv2
*/
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
struct at91_init_soc {
arm: at91: use macro to declare soc boot data Instead of check the pointer of the init function, check the new builtin bool to known if the soc is enabled. This is needed as with the switch to the pinctrl the init will be NULL on pure DT SoC. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-08-16 09:36:55 +00:00
int builtin;
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 07:28:34 +00:00
void (*map_io)(void);
at91: move clock subsystem init to soc generic init Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-24 10:20:28 +00:00
void (*init)(void);
at91: introduce commom AT91_BASE_SYS On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 07:28:34 +00:00
};
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
extern struct at91_init_soc at91_boot_soc;
extern struct at91_init_soc at91rm9200_soc;
extern struct at91_init_soc at91sam9260_soc;
extern struct at91_init_soc at91sam9261_soc;
extern struct at91_init_soc at91sam9263_soc;
extern struct at91_init_soc at91sam9g45_soc;
extern struct at91_init_soc at91sam9rl_soc;
extern struct at91_init_soc at91sam9x5_soc;
ARM: at91: Add machine header file for AT91SAM9N12 SoC Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-04-17 06:26:30 +00:00
extern struct at91_init_soc at91sam9n12_soc;
ARM: at91: introduce SAMA5 support This patch introduces the SAMA5 support and a generic board file for SAMA5 devices. It also updates the PMC driver to manage clock division which is a requirement since some peripherals can't work at the bus frequency on SAMA5. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 13:24:12 +00:00
extern struct at91_init_soc sama5d3_soc;
ARM: at91: introduce basic SAMA5D4 support Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-09-15 16:15:54 +00:00
extern struct at91_init_soc sama5d4_soc;
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
arm: at91: use macro to declare soc boot data Instead of check the pointer of the init function, check the new builtin bool to known if the soc is enabled. This is needed as with the switch to the pinctrl the init will be NULL on pure DT SoC. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-08-16 09:36:55 +00:00
#define AT91_SOC_START(_name) \
ARM: at91: change name template in AT91_SOC_START macro New devices are no more prefixed with at91 so remove the at91 and _name concatenation. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 13:24:09 +00:00
struct at91_init_soc __initdata _name##_soc \
arm: at91: use macro to declare soc boot data Instead of check the pointer of the init function, check the new builtin bool to known if the soc is enabled. This is needed as with the switch to the pinctrl the init will be NULL on pure DT SoC. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-08-16 09:36:55 +00:00
__used \
= { \
.builtin = 1, \
#define AT91_SOC_END \
};
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
static inline int at91_soc_is_enabled(void)
{
arm: at91: use macro to declare soc boot data Instead of check the pointer of the init function, check the new builtin bool to known if the soc is enabled. This is needed as with the switch to the pinctrl the init will be NULL on pure DT SoC. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-08-16 09:36:55 +00:00
return at91_boot_soc.builtin;
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
}
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
#if !defined(CONFIG_SOC_AT91RM9200)
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
#define at91rm9200_soc at91_boot_soc
#endif
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
#if !defined(CONFIG_SOC_AT91SAM9260)
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
#define at91sam9260_soc at91_boot_soc
#endif
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
#if !defined(CONFIG_SOC_AT91SAM9261)
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
#define at91sam9261_soc at91_boot_soc
#endif
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
#if !defined(CONFIG_SOC_AT91SAM9263)
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
#define at91sam9263_soc at91_boot_soc
#endif
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
#if !defined(CONFIG_SOC_AT91SAM9G45)
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
#define at91sam9g45_soc at91_boot_soc
#endif
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
#if !defined(CONFIG_SOC_AT91SAM9RL)
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
#define at91sam9rl_soc at91_boot_soc
#endif
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
#if !defined(CONFIG_SOC_AT91SAM9X5)
at91: use structure to store the current soc instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-23 14:12:57 +00:00
#define at91sam9x5_soc at91_boot_soc
#endif
ARM: at91: Add machine header file for AT91SAM9N12 SoC Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-04-17 06:26:30 +00:00
#if !defined(CONFIG_SOC_AT91SAM9N12)
#define at91sam9n12_soc at91_boot_soc
#endif
ARM: at91: introduce SAMA5 support This patch introduces the SAMA5 support and a generic board file for SAMA5 devices. It also updates the PMC driver to manage clock division which is a requirement since some peripherals can't work at the bus frequency on SAMA5. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 13:24:12 +00:00
#if !defined(CONFIG_SOC_SAMA5D3)
#define sama5d3_soc at91_boot_soc
#endif
ARM: at91: introduce basic SAMA5D4 support Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-09-15 16:15:54 +00:00
#if !defined(CONFIG_SOC_SAMA5D4)
#define sama5d4_soc at91_boot_soc
#endif
Reference in New Issue Copy Permalink