[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 16:11:32 +00:00
|
|
|
/* zd_chip.h
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _ZD_CHIP_H
|
|
|
|
#define _ZD_CHIP_H
|
|
|
|
|
|
|
|
#include "zd_types.h"
|
|
|
|
#include "zd_rf.h"
|
|
|
|
#include "zd_usb.h"
|
|
|
|
|
|
|
|
/* Header for the Media Access Controller (MAC) and the Baseband Processor
|
|
|
|
* (BBP). It appears that the ZD1211 wraps the old ZD1205 with USB glue and
|
|
|
|
* adds a processor for handling the USB protocol.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* 8-bit hardware registers */
|
|
|
|
#define CR0 CTL_REG(0x0000)
|
|
|
|
#define CR1 CTL_REG(0x0004)
|
|
|
|
#define CR2 CTL_REG(0x0008)
|
|
|
|
#define CR3 CTL_REG(0x000C)
|
|
|
|
|
|
|
|
#define CR5 CTL_REG(0x0010)
|
|
|
|
/* bit 5: if set short preamble used
|
|
|
|
* bit 6: filter band - Japan channel 14 on, else off
|
|
|
|
*/
|
|
|
|
#define CR6 CTL_REG(0x0014)
|
|
|
|
#define CR7 CTL_REG(0x0018)
|
|
|
|
#define CR8 CTL_REG(0x001C)
|
|
|
|
|
|
|
|
#define CR4 CTL_REG(0x0020)
|
|
|
|
|
|
|
|
#define CR9 CTL_REG(0x0024)
|
|
|
|
/* bit 2: antenna switch (together with CR10) */
|
|
|
|
#define CR10 CTL_REG(0x0028)
|
|
|
|
/* bit 1: antenna switch (together with CR9)
|
|
|
|
* RF2959 controls with CR11 radion on and off
|
|
|
|
*/
|
|
|
|
#define CR11 CTL_REG(0x002C)
|
|
|
|
/* bit 6: TX power control for OFDM
|
|
|
|
* RF2959 controls with CR10 radio on and off
|
|
|
|
*/
|
|
|
|
#define CR12 CTL_REG(0x0030)
|
|
|
|
#define CR13 CTL_REG(0x0034)
|
|
|
|
#define CR14 CTL_REG(0x0038)
|
|
|
|
#define CR15 CTL_REG(0x003C)
|
|
|
|
#define CR16 CTL_REG(0x0040)
|
|
|
|
#define CR17 CTL_REG(0x0044)
|
|
|
|
#define CR18 CTL_REG(0x0048)
|
|
|
|
#define CR19 CTL_REG(0x004C)
|
|
|
|
#define CR20 CTL_REG(0x0050)
|
|
|
|
#define CR21 CTL_REG(0x0054)
|
|
|
|
#define CR22 CTL_REG(0x0058)
|
|
|
|
#define CR23 CTL_REG(0x005C)
|
|
|
|
#define CR24 CTL_REG(0x0060) /* CCA threshold */
|
|
|
|
#define CR25 CTL_REG(0x0064)
|
|
|
|
#define CR26 CTL_REG(0x0068)
|
|
|
|
#define CR27 CTL_REG(0x006C)
|
|
|
|
#define CR28 CTL_REG(0x0070)
|
|
|
|
#define CR29 CTL_REG(0x0074)
|
|
|
|
#define CR30 CTL_REG(0x0078)
|
|
|
|
#define CR31 CTL_REG(0x007C) /* TX power control for RF in CCK mode */
|
|
|
|
#define CR32 CTL_REG(0x0080)
|
|
|
|
#define CR33 CTL_REG(0x0084)
|
|
|
|
#define CR34 CTL_REG(0x0088)
|
|
|
|
#define CR35 CTL_REG(0x008C)
|
|
|
|
#define CR36 CTL_REG(0x0090)
|
|
|
|
#define CR37 CTL_REG(0x0094)
|
|
|
|
#define CR38 CTL_REG(0x0098)
|
|
|
|
#define CR39 CTL_REG(0x009C)
|
|
|
|
#define CR40 CTL_REG(0x00A0)
|
|
|
|
#define CR41 CTL_REG(0x00A4)
|
|
|
|
#define CR42 CTL_REG(0x00A8)
|
|
|
|
#define CR43 CTL_REG(0x00AC)
|
|
|
|
#define CR44 CTL_REG(0x00B0)
|
|
|
|
#define CR45 CTL_REG(0x00B4)
|
|
|
|
#define CR46 CTL_REG(0x00B8)
|
|
|
|
#define CR47 CTL_REG(0x00BC) /* CCK baseband gain
|
|
|
|
* (patch value might be in EEPROM)
|
|
|
|
*/
|
|
|
|
#define CR48 CTL_REG(0x00C0)
|
|
|
|
#define CR49 CTL_REG(0x00C4)
|
|
|
|
#define CR50 CTL_REG(0x00C8)
|
|
|
|
#define CR51 CTL_REG(0x00CC) /* TX power control for RF in 6-36M modes */
|
|
|
|
#define CR52 CTL_REG(0x00D0) /* TX power control for RF in 48M mode */
|
|
|
|
#define CR53 CTL_REG(0x00D4) /* TX power control for RF in 54M mode */
|
|
|
|
#define CR54 CTL_REG(0x00D8)
|
|
|
|
#define CR55 CTL_REG(0x00DC)
|
|
|
|
#define CR56 CTL_REG(0x00E0)
|
|
|
|
#define CR57 CTL_REG(0x00E4)
|
|
|
|
#define CR58 CTL_REG(0x00E8)
|
|
|
|
#define CR59 CTL_REG(0x00EC)
|
|
|
|
#define CR60 CTL_REG(0x00F0)
|
|
|
|
#define CR61 CTL_REG(0x00F4)
|
|
|
|
#define CR62 CTL_REG(0x00F8)
|
|
|
|
#define CR63 CTL_REG(0x00FC)
|
|
|
|
#define CR64 CTL_REG(0x0100)
|
|
|
|
#define CR65 CTL_REG(0x0104) /* OFDM 54M calibration */
|
|
|
|
#define CR66 CTL_REG(0x0108) /* OFDM 48M calibration */
|
|
|
|
#define CR67 CTL_REG(0x010C) /* OFDM 36M calibration */
|
|
|
|
#define CR68 CTL_REG(0x0110) /* CCK calibration */
|
|
|
|
#define CR69 CTL_REG(0x0114)
|
|
|
|
#define CR70 CTL_REG(0x0118)
|
|
|
|
#define CR71 CTL_REG(0x011C)
|
|
|
|
#define CR72 CTL_REG(0x0120)
|
|
|
|
#define CR73 CTL_REG(0x0124)
|
|
|
|
#define CR74 CTL_REG(0x0128)
|
|
|
|
#define CR75 CTL_REG(0x012C)
|
|
|
|
#define CR76 CTL_REG(0x0130)
|
|
|
|
#define CR77 CTL_REG(0x0134)
|
|
|
|
#define CR78 CTL_REG(0x0138)
|
|
|
|
#define CR79 CTL_REG(0x013C)
|
|
|
|
#define CR80 CTL_REG(0x0140)
|
|
|
|
#define CR81 CTL_REG(0x0144)
|
|
|
|
#define CR82 CTL_REG(0x0148)
|
|
|
|
#define CR83 CTL_REG(0x014C)
|
|
|
|
#define CR84 CTL_REG(0x0150)
|
|
|
|
#define CR85 CTL_REG(0x0154)
|
|
|
|
#define CR86 CTL_REG(0x0158)
|
|
|
|
#define CR87 CTL_REG(0x015C)
|
|
|
|
#define CR88 CTL_REG(0x0160)
|
|
|
|
#define CR89 CTL_REG(0x0164)
|
|
|
|
#define CR90 CTL_REG(0x0168)
|
|
|
|
#define CR91 CTL_REG(0x016C)
|
|
|
|
#define CR92 CTL_REG(0x0170)
|
|
|
|
#define CR93 CTL_REG(0x0174)
|
|
|
|
#define CR94 CTL_REG(0x0178)
|
|
|
|
#define CR95 CTL_REG(0x017C)
|
|
|
|
#define CR96 CTL_REG(0x0180)
|
|
|
|
#define CR97 CTL_REG(0x0184)
|
|
|
|
#define CR98 CTL_REG(0x0188)
|
|
|
|
#define CR99 CTL_REG(0x018C)
|
|
|
|
#define CR100 CTL_REG(0x0190)
|
|
|
|
#define CR101 CTL_REG(0x0194)
|
|
|
|
#define CR102 CTL_REG(0x0198)
|
|
|
|
#define CR103 CTL_REG(0x019C)
|
|
|
|
#define CR104 CTL_REG(0x01A0)
|
|
|
|
#define CR105 CTL_REG(0x01A4)
|
|
|
|
#define CR106 CTL_REG(0x01A8)
|
|
|
|
#define CR107 CTL_REG(0x01AC)
|
|
|
|
#define CR108 CTL_REG(0x01B0)
|
|
|
|
#define CR109 CTL_REG(0x01B4)
|
|
|
|
#define CR110 CTL_REG(0x01B8)
|
|
|
|
#define CR111 CTL_REG(0x01BC)
|
|
|
|
#define CR112 CTL_REG(0x01C0)
|
|
|
|
#define CR113 CTL_REG(0x01C4)
|
|
|
|
#define CR114 CTL_REG(0x01C8)
|
|
|
|
#define CR115 CTL_REG(0x01CC)
|
|
|
|
#define CR116 CTL_REG(0x01D0)
|
|
|
|
#define CR117 CTL_REG(0x01D4)
|
|
|
|
#define CR118 CTL_REG(0x01D8)
|
|
|
|
#define CR119 CTL_REG(0x01DC)
|
|
|
|
#define CR120 CTL_REG(0x01E0)
|
|
|
|
#define CR121 CTL_REG(0x01E4)
|
|
|
|
#define CR122 CTL_REG(0x01E8)
|
|
|
|
#define CR123 CTL_REG(0x01EC)
|
|
|
|
#define CR124 CTL_REG(0x01F0)
|
|
|
|
#define CR125 CTL_REG(0x01F4)
|
|
|
|
#define CR126 CTL_REG(0x01F8)
|
|
|
|
#define CR127 CTL_REG(0x01FC)
|
|
|
|
#define CR128 CTL_REG(0x0200)
|
|
|
|
#define CR129 CTL_REG(0x0204)
|
|
|
|
#define CR130 CTL_REG(0x0208)
|
|
|
|
#define CR131 CTL_REG(0x020C)
|
|
|
|
#define CR132 CTL_REG(0x0210)
|
|
|
|
#define CR133 CTL_REG(0x0214)
|
|
|
|
#define CR134 CTL_REG(0x0218)
|
|
|
|
#define CR135 CTL_REG(0x021C)
|
|
|
|
#define CR136 CTL_REG(0x0220)
|
|
|
|
#define CR137 CTL_REG(0x0224)
|
|
|
|
#define CR138 CTL_REG(0x0228)
|
|
|
|
#define CR139 CTL_REG(0x022C)
|
|
|
|
#define CR140 CTL_REG(0x0230)
|
|
|
|
#define CR141 CTL_REG(0x0234)
|
|
|
|
#define CR142 CTL_REG(0x0238)
|
|
|
|
#define CR143 CTL_REG(0x023C)
|
|
|
|
#define CR144 CTL_REG(0x0240)
|
|
|
|
#define CR145 CTL_REG(0x0244)
|
|
|
|
#define CR146 CTL_REG(0x0248)
|
|
|
|
#define CR147 CTL_REG(0x024C)
|
|
|
|
#define CR148 CTL_REG(0x0250)
|
|
|
|
#define CR149 CTL_REG(0x0254)
|
|
|
|
#define CR150 CTL_REG(0x0258)
|
|
|
|
#define CR151 CTL_REG(0x025C)
|
|
|
|
#define CR152 CTL_REG(0x0260)
|
|
|
|
#define CR153 CTL_REG(0x0264)
|
|
|
|
#define CR154 CTL_REG(0x0268)
|
|
|
|
#define CR155 CTL_REG(0x026C)
|
|
|
|
#define CR156 CTL_REG(0x0270)
|
|
|
|
#define CR157 CTL_REG(0x0274)
|
|
|
|
#define CR158 CTL_REG(0x0278)
|
|
|
|
#define CR159 CTL_REG(0x027C)
|
|
|
|
#define CR160 CTL_REG(0x0280)
|
|
|
|
#define CR161 CTL_REG(0x0284)
|
|
|
|
#define CR162 CTL_REG(0x0288)
|
|
|
|
#define CR163 CTL_REG(0x028C)
|
|
|
|
#define CR164 CTL_REG(0x0290)
|
|
|
|
#define CR165 CTL_REG(0x0294)
|
|
|
|
#define CR166 CTL_REG(0x0298)
|
|
|
|
#define CR167 CTL_REG(0x029C)
|
|
|
|
#define CR168 CTL_REG(0x02A0)
|
|
|
|
#define CR169 CTL_REG(0x02A4)
|
|
|
|
#define CR170 CTL_REG(0x02A8)
|
|
|
|
#define CR171 CTL_REG(0x02AC)
|
|
|
|
#define CR172 CTL_REG(0x02B0)
|
|
|
|
#define CR173 CTL_REG(0x02B4)
|
|
|
|
#define CR174 CTL_REG(0x02B8)
|
|
|
|
#define CR175 CTL_REG(0x02BC)
|
|
|
|
#define CR176 CTL_REG(0x02C0)
|
|
|
|
#define CR177 CTL_REG(0x02C4)
|
|
|
|
#define CR178 CTL_REG(0x02C8)
|
|
|
|
#define CR179 CTL_REG(0x02CC)
|
|
|
|
#define CR180 CTL_REG(0x02D0)
|
|
|
|
#define CR181 CTL_REG(0x02D4)
|
|
|
|
#define CR182 CTL_REG(0x02D8)
|
|
|
|
#define CR183 CTL_REG(0x02DC)
|
|
|
|
#define CR184 CTL_REG(0x02E0)
|
|
|
|
#define CR185 CTL_REG(0x02E4)
|
|
|
|
#define CR186 CTL_REG(0x02E8)
|
|
|
|
#define CR187 CTL_REG(0x02EC)
|
|
|
|
#define CR188 CTL_REG(0x02F0)
|
|
|
|
#define CR189 CTL_REG(0x02F4)
|
|
|
|
#define CR190 CTL_REG(0x02F8)
|
|
|
|
#define CR191 CTL_REG(0x02FC)
|
|
|
|
#define CR192 CTL_REG(0x0300)
|
|
|
|
#define CR193 CTL_REG(0x0304)
|
|
|
|
#define CR194 CTL_REG(0x0308)
|
|
|
|
#define CR195 CTL_REG(0x030C)
|
|
|
|
#define CR196 CTL_REG(0x0310)
|
|
|
|
#define CR197 CTL_REG(0x0314)
|
|
|
|
#define CR198 CTL_REG(0x0318)
|
|
|
|
#define CR199 CTL_REG(0x031C)
|
|
|
|
#define CR200 CTL_REG(0x0320)
|
|
|
|
#define CR201 CTL_REG(0x0324)
|
|
|
|
#define CR202 CTL_REG(0x0328)
|
|
|
|
#define CR203 CTL_REG(0x032C) /* I2C bus template value & flash control */
|
|
|
|
#define CR204 CTL_REG(0x0330)
|
|
|
|
#define CR205 CTL_REG(0x0334)
|
|
|
|
#define CR206 CTL_REG(0x0338)
|
|
|
|
#define CR207 CTL_REG(0x033C)
|
|
|
|
#define CR208 CTL_REG(0x0340)
|
|
|
|
#define CR209 CTL_REG(0x0344)
|
|
|
|
#define CR210 CTL_REG(0x0348)
|
|
|
|
#define CR211 CTL_REG(0x034C)
|
|
|
|
#define CR212 CTL_REG(0x0350)
|
|
|
|
#define CR213 CTL_REG(0x0354)
|
|
|
|
#define CR214 CTL_REG(0x0358)
|
|
|
|
#define CR215 CTL_REG(0x035C)
|
|
|
|
#define CR216 CTL_REG(0x0360)
|
|
|
|
#define CR217 CTL_REG(0x0364)
|
|
|
|
#define CR218 CTL_REG(0x0368)
|
|
|
|
#define CR219 CTL_REG(0x036C)
|
|
|
|
#define CR220 CTL_REG(0x0370)
|
|
|
|
#define CR221 CTL_REG(0x0374)
|
|
|
|
#define CR222 CTL_REG(0x0378)
|
|
|
|
#define CR223 CTL_REG(0x037C)
|
|
|
|
#define CR224 CTL_REG(0x0380)
|
|
|
|
#define CR225 CTL_REG(0x0384)
|
|
|
|
#define CR226 CTL_REG(0x0388)
|
|
|
|
#define CR227 CTL_REG(0x038C)
|
|
|
|
#define CR228 CTL_REG(0x0390)
|
|
|
|
#define CR229 CTL_REG(0x0394)
|
|
|
|
#define CR230 CTL_REG(0x0398)
|
|
|
|
#define CR231 CTL_REG(0x039C)
|
|
|
|
#define CR232 CTL_REG(0x03A0)
|
|
|
|
#define CR233 CTL_REG(0x03A4)
|
|
|
|
#define CR234 CTL_REG(0x03A8)
|
|
|
|
#define CR235 CTL_REG(0x03AC)
|
|
|
|
#define CR236 CTL_REG(0x03B0)
|
|
|
|
|
|
|
|
#define CR240 CTL_REG(0x03C0)
|
|
|
|
/* bit 7: host-controlled RF register writes
|
|
|
|
* CR241-CR245: for hardware controlled writing of RF bits, not needed for
|
|
|
|
* USB
|
|
|
|
*/
|
|
|
|
#define CR241 CTL_REG(0x03C4)
|
|
|
|
#define CR242 CTL_REG(0x03C8)
|
|
|
|
#define CR243 CTL_REG(0x03CC)
|
|
|
|
#define CR244 CTL_REG(0x03D0)
|
|
|
|
#define CR245 CTL_REG(0x03D4)
|
|
|
|
|
|
|
|
#define CR251 CTL_REG(0x03EC) /* only used for activation and deactivation of
|
|
|
|
* Airoha RFs AL2230 and AL7230B
|
|
|
|
*/
|
|
|
|
#define CR252 CTL_REG(0x03F0)
|
|
|
|
#define CR253 CTL_REG(0x03F4)
|
|
|
|
#define CR254 CTL_REG(0x03F8)
|
|
|
|
#define CR255 CTL_REG(0x03FC)
|
|
|
|
|
|
|
|
#define CR_MAX_PHY_REG 255
|
|
|
|
|
|
|
|
/* Taken from the ZYDAS driver, not all of them are relevant for the ZSD1211
|
|
|
|
* driver.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define CR_RF_IF_CLK CTL_REG(0x0400)
|
|
|
|
#define CR_RF_IF_DATA CTL_REG(0x0404)
|
|
|
|
#define CR_PE1_PE2 CTL_REG(0x0408)
|
|
|
|
#define CR_PE2_DLY CTL_REG(0x040C)
|
|
|
|
#define CR_LE1 CTL_REG(0x0410)
|
|
|
|
#define CR_LE2 CTL_REG(0x0414)
|
|
|
|
/* Seems to enable/disable GPI (General Purpose IO?) */
|
|
|
|
#define CR_GPI_EN CTL_REG(0x0418)
|
|
|
|
#define CR_RADIO_PD CTL_REG(0x042C)
|
|
|
|
#define CR_RF2948_PD CTL_REG(0x042C)
|
|
|
|
#define CR_ENABLE_PS_MANUAL_AGC CTL_REG(0x043C)
|
|
|
|
#define CR_CONFIG_PHILIPS CTL_REG(0x0440)
|
|
|
|
#define CR_SA2400_SER_AP CTL_REG(0x0444)
|
|
|
|
#define CR_I2C_WRITE CTL_REG(0x0444)
|
|
|
|
#define CR_SA2400_SER_RP CTL_REG(0x0448)
|
|
|
|
#define CR_RADIO_PE CTL_REG(0x0458)
|
|
|
|
#define CR_RST_BUS_MASTER CTL_REG(0x045C)
|
|
|
|
#define CR_RFCFG CTL_REG(0x0464)
|
|
|
|
#define CR_HSTSCHG CTL_REG(0x046C)
|
|
|
|
#define CR_PHY_ON CTL_REG(0x0474)
|
|
|
|
#define CR_RX_DELAY CTL_REG(0x0478)
|
|
|
|
#define CR_RX_PE_DELAY CTL_REG(0x047C)
|
|
|
|
#define CR_GPIO_1 CTL_REG(0x0490)
|
|
|
|
#define CR_GPIO_2 CTL_REG(0x0494)
|
|
|
|
#define CR_EncryBufMux CTL_REG(0x04A8)
|
|
|
|
#define CR_PS_CTRL CTL_REG(0x0500)
|
|
|
|
#define CR_ADDA_PWR_DWN CTL_REG(0x0504)
|
|
|
|
#define CR_ADDA_MBIAS_WARMTIME CTL_REG(0x0508)
|
|
|
|
#define CR_MAC_PS_STATE CTL_REG(0x050C)
|
|
|
|
|
|
|
|
#define CR_INTERRUPT CTL_REG(0x0510)
|
|
|
|
#define INT_TX_COMPLETE 0x00000001
|
|
|
|
#define INT_RX_COMPLETE 0x00000002
|
|
|
|
#define INT_RETRY_FAIL 0x00000004
|
|
|
|
#define INT_WAKEUP 0x00000008
|
|
|
|
#define INT_DTIM_NOTIFY 0x00000020
|
|
|
|
#define INT_CFG_NEXT_BCN 0x00000040
|
|
|
|
#define INT_BUS_ABORT 0x00000080
|
|
|
|
#define INT_TX_FIFO_READY 0x00000100
|
|
|
|
#define INT_UART 0x00000200
|
|
|
|
#define INT_TX_COMPLETE_EN 0x00010000
|
|
|
|
#define INT_RX_COMPLETE_EN 0x00020000
|
|
|
|
#define INT_RETRY_FAIL_EN 0x00040000
|
|
|
|
#define INT_WAKEUP_EN 0x00080000
|
|
|
|
#define INT_DTIM_NOTIFY_EN 0x00200000
|
|
|
|
#define INT_CFG_NEXT_BCN_EN 0x00400000
|
|
|
|
#define INT_BUS_ABORT_EN 0x00800000
|
|
|
|
#define INT_TX_FIFO_READY_EN 0x01000000
|
|
|
|
#define INT_UART_EN 0x02000000
|
|
|
|
|
|
|
|
#define CR_TSF_LOW_PART CTL_REG(0x0514)
|
|
|
|
#define CR_TSF_HIGH_PART CTL_REG(0x0518)
|
|
|
|
|
|
|
|
/* Following three values are in time units (1024us)
|
|
|
|
* Following condition must be met:
|
|
|
|
* atim < tbtt < bcn
|
|
|
|
*/
|
|
|
|
#define CR_ATIM_WND_PERIOD CTL_REG(0x051C)
|
|
|
|
#define CR_BCN_INTERVAL CTL_REG(0x0520)
|
|
|
|
#define CR_PRE_TBTT CTL_REG(0x0524)
|
|
|
|
/* in units of TU(1024us) */
|
|
|
|
|
|
|
|
/* for UART support */
|
|
|
|
#define CR_UART_RBR_THR_DLL CTL_REG(0x0540)
|
|
|
|
#define CR_UART_DLM_IER CTL_REG(0x0544)
|
|
|
|
#define CR_UART_IIR_FCR CTL_REG(0x0548)
|
|
|
|
#define CR_UART_LCR CTL_REG(0x054c)
|
|
|
|
#define CR_UART_MCR CTL_REG(0x0550)
|
|
|
|
#define CR_UART_LSR CTL_REG(0x0554)
|
|
|
|
#define CR_UART_MSR CTL_REG(0x0558)
|
|
|
|
#define CR_UART_ECR CTL_REG(0x055c)
|
|
|
|
#define CR_UART_STATUS CTL_REG(0x0560)
|
|
|
|
|
|
|
|
#define CR_PCI_TX_ADDR_P1 CTL_REG(0x0600)
|
|
|
|
#define CR_PCI_TX_AddR_P2 CTL_REG(0x0604)
|
|
|
|
#define CR_PCI_RX_AddR_P1 CTL_REG(0x0608)
|
|
|
|
#define CR_PCI_RX_AddR_P2 CTL_REG(0x060C)
|
|
|
|
|
|
|
|
/* must be overwritten if custom MAC address will be used */
|
|
|
|
#define CR_MAC_ADDR_P1 CTL_REG(0x0610)
|
|
|
|
#define CR_MAC_ADDR_P2 CTL_REG(0x0614)
|
|
|
|
#define CR_BSSID_P1 CTL_REG(0x0618)
|
|
|
|
#define CR_BSSID_P2 CTL_REG(0x061C)
|
|
|
|
#define CR_BCN_PLCP_CFG CTL_REG(0x0620)
|
|
|
|
#define CR_GROUP_HASH_P1 CTL_REG(0x0624)
|
|
|
|
#define CR_GROUP_HASH_P2 CTL_REG(0x0628)
|
|
|
|
#define CR_RX_TIMEOUT CTL_REG(0x062C)
|
|
|
|
|
|
|
|
/* Basic rates supported by the BSS. When producing ACK or CTS messages, the
|
|
|
|
* device will use a rate in this table that is less than or equal to the rate
|
|
|
|
* of the incoming frame which prompted the response */
|
|
|
|
#define CR_BASIC_RATE_TBL CTL_REG(0x0630)
|
|
|
|
#define CR_RATE_1M 0x0001 /* 802.11b */
|
|
|
|
#define CR_RATE_2M 0x0002 /* 802.11b */
|
|
|
|
#define CR_RATE_5_5M 0x0004 /* 802.11b */
|
|
|
|
#define CR_RATE_11M 0x0008 /* 802.11b */
|
|
|
|
#define CR_RATE_6M 0x0100 /* 802.11g */
|
|
|
|
#define CR_RATE_9M 0x0200 /* 802.11g */
|
|
|
|
#define CR_RATE_12M 0x0400 /* 802.11g */
|
|
|
|
#define CR_RATE_18M 0x0800 /* 802.11g */
|
|
|
|
#define CR_RATE_24M 0x1000 /* 802.11g */
|
|
|
|
#define CR_RATE_36M 0x2000 /* 802.11g */
|
|
|
|
#define CR_RATE_48M 0x4000 /* 802.11g */
|
|
|
|
#define CR_RATE_54M 0x8000 /* 802.11g */
|
|
|
|
#define CR_RATES_80211G 0xff00
|
|
|
|
#define CR_RATES_80211B 0x000f
|
|
|
|
|
|
|
|
/* Mandatory rates required in the BSS. When producing ACK or CTS messages, if
|
|
|
|
* the device could not find an appropriate rate in CR_BASIC_RATE_TBL, it will
|
|
|
|
* look for a rate in this table that is less than or equal to the rate of
|
|
|
|
* the incoming frame. */
|
|
|
|
#define CR_MANDATORY_RATE_TBL CTL_REG(0x0634)
|
|
|
|
#define CR_RTS_CTS_RATE CTL_REG(0x0638)
|
|
|
|
|
|
|
|
#define CR_WEP_PROTECT CTL_REG(0x063C)
|
|
|
|
#define CR_RX_THRESHOLD CTL_REG(0x0640)
|
|
|
|
|
|
|
|
/* register for controlling the LEDS */
|
|
|
|
#define CR_LED CTL_REG(0x0644)
|
|
|
|
/* masks for controlling LEDs */
|
|
|
|
#define LED1 0x0100
|
|
|
|
#define LED2 0x0200
|
|
|
|
|
|
|
|
/* Seems to indicate that the configuration is over.
|
|
|
|
*/
|
|
|
|
#define CR_AFTER_PNP CTL_REG(0x0648)
|
|
|
|
#define CR_ACK_TIME_80211 CTL_REG(0x0658)
|
|
|
|
|
|
|
|
#define CR_RX_OFFSET CTL_REG(0x065c)
|
|
|
|
|
|
|
|
#define CR_PHY_DELAY CTL_REG(0x066C)
|
|
|
|
#define CR_BCN_FIFO CTL_REG(0x0670)
|
|
|
|
#define CR_SNIFFER_ON CTL_REG(0x0674)
|
|
|
|
|
|
|
|
#define CR_ENCRYPTION_TYPE CTL_REG(0x0678)
|
|
|
|
#define NO_WEP 0
|
|
|
|
#define WEP64 1
|
|
|
|
#define WEP128 5
|
|
|
|
#define WEP256 6
|
|
|
|
#define ENC_SNIFFER 8
|
|
|
|
|
|
|
|
#define CR_ZD1211_RETRY_MAX CTL_REG(0x067C)
|
|
|
|
|
|
|
|
#define CR_REG1 CTL_REG(0x0680)
|
|
|
|
/* Setting the bit UNLOCK_PHY_REGS disallows the write access to physical
|
|
|
|
* registers, so one could argue it is a LOCK bit. But calling it
|
|
|
|
* LOCK_PHY_REGS makes it confusing.
|
|
|
|
*/
|
|
|
|
#define UNLOCK_PHY_REGS 0x0080
|
|
|
|
|
|
|
|
#define CR_DEVICE_STATE CTL_REG(0x0684)
|
|
|
|
#define CR_UNDERRUN_CNT CTL_REG(0x0688)
|
|
|
|
|
|
|
|
#define CR_RX_FILTER CTL_REG(0x068c)
|
|
|
|
#define RX_FILTER_ASSOC_RESPONSE 0x0002
|
2006-08-01 21:43:31 +00:00
|
|
|
#define RX_FILTER_REASSOC_RESPONSE 0x0008
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 16:11:32 +00:00
|
|
|
#define RX_FILTER_PROBE_RESPONSE 0x0020
|
|
|
|
#define RX_FILTER_BEACON 0x0100
|
2006-08-01 21:43:31 +00:00
|
|
|
#define RX_FILTER_DISASSOC 0x0400
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 16:11:32 +00:00
|
|
|
#define RX_FILTER_AUTH 0x0800
|
2006-08-01 21:43:31 +00:00
|
|
|
/* Monitor mode sets filter to 0xfffff */
|
[PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.
Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.
Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.
This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.
This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!
We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite
If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 16:11:32 +00:00
|
|
|
|
|
|
|
#define CR_ACK_TIMEOUT_EXT CTL_REG(0x0690)
|
|
|
|
#define CR_BCN_FIFO_SEMAPHORE CTL_REG(0x0694)
|
|
|
|
#define CR_IFS_VALUE CTL_REG(0x0698)
|
|
|
|
#define CR_RX_TIME_OUT CTL_REG(0x069C)
|
|
|
|
#define CR_TOTAL_RX_FRM CTL_REG(0x06A0)
|
|
|
|
#define CR_CRC32_CNT CTL_REG(0x06A4)
|
|
|
|
#define CR_CRC16_CNT CTL_REG(0x06A8)
|
|
|
|
#define CR_DECRYPTION_ERR_UNI CTL_REG(0x06AC)
|
|
|
|
#define CR_RX_FIFO_OVERRUN CTL_REG(0x06B0)
|
|
|
|
|
|
|
|
#define CR_DECRYPTION_ERR_MUL CTL_REG(0x06BC)
|
|
|
|
|
|
|
|
#define CR_NAV_CNT CTL_REG(0x06C4)
|
|
|
|
#define CR_NAV_CCA CTL_REG(0x06C8)
|
|
|
|
#define CR_RETRY_CNT CTL_REG(0x06CC)
|
|
|
|
|
|
|
|
#define CR_READ_TCB_ADDR CTL_REG(0x06E8)
|
|
|
|
#define CR_READ_RFD_ADDR CTL_REG(0x06EC)
|
|
|
|
#define CR_CWMIN_CWMAX CTL_REG(0x06F0)
|
|
|
|
#define CR_TOTAL_TX_FRM CTL_REG(0x06F4)
|
|
|
|
|
|
|
|
/* CAM: Continuous Access Mode (power management) */
|
|
|
|
#define CR_CAM_MODE CTL_REG(0x0700)
|
|
|
|
#define CR_CAM_ROLL_TB_LOW CTL_REG(0x0704)
|
|
|
|
#define CR_CAM_ROLL_TB_HIGH CTL_REG(0x0708)
|
|
|
|
#define CR_CAM_ADDRESS CTL_REG(0x070C)
|
|
|
|
#define CR_CAM_DATA CTL_REG(0x0710)
|
|
|
|
|
|
|
|
#define CR_ROMDIR CTL_REG(0x0714)
|
|
|
|
|
|
|
|
#define CR_DECRY_ERR_FLG_LOW CTL_REG(0x0714)
|
|
|
|
#define CR_DECRY_ERR_FLG_HIGH CTL_REG(0x0718)
|
|
|
|
|
|
|
|
#define CR_WEPKEY0 CTL_REG(0x0720)
|
|
|
|
#define CR_WEPKEY1 CTL_REG(0x0724)
|
|
|
|
#define CR_WEPKEY2 CTL_REG(0x0728)
|
|
|
|
#define CR_WEPKEY3 CTL_REG(0x072C)
|
|
|
|
#define CR_WEPKEY4 CTL_REG(0x0730)
|
|
|
|
#define CR_WEPKEY5 CTL_REG(0x0734)
|
|
|
|
#define CR_WEPKEY6 CTL_REG(0x0738)
|
|
|
|
#define CR_WEPKEY7 CTL_REG(0x073C)
|
|
|
|
#define CR_WEPKEY8 CTL_REG(0x0740)
|
|
|
|
#define CR_WEPKEY9 CTL_REG(0x0744)
|
|
|
|
#define CR_WEPKEY10 CTL_REG(0x0748)
|
|
|
|
#define CR_WEPKEY11 CTL_REG(0x074C)
|
|
|
|
#define CR_WEPKEY12 CTL_REG(0x0750)
|
|
|
|
#define CR_WEPKEY13 CTL_REG(0x0754)
|
|
|
|
#define CR_WEPKEY14 CTL_REG(0x0758)
|
|
|
|
#define CR_WEPKEY15 CTL_REG(0x075c)
|
|
|
|
#define CR_TKIP_MODE CTL_REG(0x0760)
|
|
|
|
|
|
|
|
#define CR_EEPROM_PROTECT0 CTL_REG(0x0758)
|
|
|
|
#define CR_EEPROM_PROTECT1 CTL_REG(0x075C)
|
|
|
|
|
|
|
|
#define CR_DBG_FIFO_RD CTL_REG(0x0800)
|
|
|
|
#define CR_DBG_SELECT CTL_REG(0x0804)
|
|
|
|
#define CR_FIFO_Length CTL_REG(0x0808)
|
|
|
|
|
|
|
|
|
|
|
|
#define CR_RSSI_MGC CTL_REG(0x0810)
|
|
|
|
|
|
|
|
#define CR_PON CTL_REG(0x0818)
|
|
|
|
#define CR_RX_ON CTL_REG(0x081C)
|
|
|
|
#define CR_TX_ON CTL_REG(0x0820)
|
|
|
|
#define CR_CHIP_EN CTL_REG(0x0824)
|
|
|
|
#define CR_LO_SW CTL_REG(0x0828)
|
|
|
|
#define CR_TXRX_SW CTL_REG(0x082C)
|
|
|
|
#define CR_S_MD CTL_REG(0x0830)
|
|
|
|
|
|
|
|
#define CR_USB_DEBUG_PORT CTL_REG(0x0888)
|
|
|
|
|
|
|
|
#define CR_ZD1211B_TX_PWR_CTL1 CTL_REG(0x0b00)
|
|
|
|
#define CR_ZD1211B_TX_PWR_CTL2 CTL_REG(0x0b04)
|
|
|
|
#define CR_ZD1211B_TX_PWR_CTL3 CTL_REG(0x0b08)
|
|
|
|
#define CR_ZD1211B_TX_PWR_CTL4 CTL_REG(0x0b0c)
|
|
|
|
#define CR_ZD1211B_AIFS_CTL1 CTL_REG(0x0b10)
|
|
|
|
#define CR_ZD1211B_AIFS_CTL2 CTL_REG(0x0b14)
|
|
|
|
#define CR_ZD1211B_TXOP CTL_REG(0x0b20)
|
|
|
|
#define CR_ZD1211B_RETRY_MAX CTL_REG(0x0b28)
|
|
|
|
|
|
|
|
#define AP_RX_FILTER 0x0400feff
|
|
|
|
#define STA_RX_FILTER 0x0000ffff
|
|
|
|
|
|
|
|
#define CWIN_SIZE 0x007f043f
|
|
|
|
|
|
|
|
|
|
|
|
#define HWINT_ENABLED 0x004f0000
|
|
|
|
#define HWINT_DISABLED 0
|
|
|
|
|
|
|
|
#define E2P_PWR_INT_GUARD 8
|
|
|
|
#define E2P_CHANNEL_COUNT 14
|
|
|
|
|
|
|
|
/* If you compare this addresses with the ZYDAS orignal driver, please notify
|
|
|
|
* that we use word mapping for the EEPROM.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Upper 16 bit contains the regulatory domain.
|
|
|
|
*/
|
|
|
|
#define E2P_SUBID E2P_REG(0x00)
|
|
|
|
#define E2P_POD E2P_REG(0x02)
|
|
|
|
#define E2P_MAC_ADDR_P1 E2P_REG(0x04)
|
|
|
|
#define E2P_MAC_ADDR_P2 E2P_REG(0x06)
|
|
|
|
#define E2P_PWR_CAL_VALUE1 E2P_REG(0x08)
|
|
|
|
#define E2P_PWR_CAL_VALUE2 E2P_REG(0x0a)
|
|
|
|
#define E2P_PWR_CAL_VALUE3 E2P_REG(0x0c)
|
|
|
|
#define E2P_PWR_CAL_VALUE4 E2P_REG(0x0e)
|
|
|
|
#define E2P_PWR_INT_VALUE1 E2P_REG(0x10)
|
|
|
|
#define E2P_PWR_INT_VALUE2 E2P_REG(0x12)
|
|
|
|
#define E2P_PWR_INT_VALUE3 E2P_REG(0x14)
|
|
|
|
#define E2P_PWR_INT_VALUE4 E2P_REG(0x16)
|
|
|
|
|
|
|
|
/* Contains a bit for each allowed channel. It gives for Europe (ETSI 0x30)
|
|
|
|
* also only 11 channels. */
|
|
|
|
#define E2P_ALLOWED_CHANNEL E2P_REG(0x18)
|
|
|
|
|
|
|
|
#define E2P_PHY_REG E2P_REG(0x1a)
|
|
|
|
#define E2P_DEVICE_VER E2P_REG(0x20)
|
|
|
|
#define E2P_36M_CAL_VALUE1 E2P_REG(0x28)
|
|
|
|
#define E2P_36M_CAL_VALUE2 E2P_REG(0x2a)
|
|
|
|
#define E2P_36M_CAL_VALUE3 E2P_REG(0x2c)
|
|
|
|
#define E2P_36M_CAL_VALUE4 E2P_REG(0x2e)
|
|
|
|
#define E2P_11A_INT_VALUE1 E2P_REG(0x30)
|
|
|
|
#define E2P_11A_INT_VALUE2 E2P_REG(0x32)
|
|
|
|
#define E2P_11A_INT_VALUE3 E2P_REG(0x34)
|
|
|
|
#define E2P_11A_INT_VALUE4 E2P_REG(0x36)
|
|
|
|
#define E2P_48M_CAL_VALUE1 E2P_REG(0x38)
|
|
|
|
#define E2P_48M_CAL_VALUE2 E2P_REG(0x3a)
|
|
|
|
#define E2P_48M_CAL_VALUE3 E2P_REG(0x3c)
|
|
|
|
#define E2P_48M_CAL_VALUE4 E2P_REG(0x3e)
|
|
|
|
#define E2P_48M_INT_VALUE1 E2P_REG(0x40)
|
|
|
|
#define E2P_48M_INT_VALUE2 E2P_REG(0x42)
|
|
|
|
#define E2P_48M_INT_VALUE3 E2P_REG(0x44)
|
|
|
|
#define E2P_48M_INT_VALUE4 E2P_REG(0x46)
|
|
|
|
#define E2P_54M_CAL_VALUE1 E2P_REG(0x48) /* ??? */
|
|
|
|
#define E2P_54M_CAL_VALUE2 E2P_REG(0x4a)
|
|
|
|
#define E2P_54M_CAL_VALUE3 E2P_REG(0x4c)
|
|
|
|
#define E2P_54M_CAL_VALUE4 E2P_REG(0x4e)
|
|
|
|
#define E2P_54M_INT_VALUE1 E2P_REG(0x50)
|
|
|
|
#define E2P_54M_INT_VALUE2 E2P_REG(0x52)
|
|
|
|
#define E2P_54M_INT_VALUE3 E2P_REG(0x54)
|
|
|
|
#define E2P_54M_INT_VALUE4 E2P_REG(0x56)
|
|
|
|
|
|
|
|
/* All 16 bit values */
|
|
|
|
#define FW_FIRMWARE_VER FW_REG(0)
|
|
|
|
/* non-zero if USB high speed connection */
|
|
|
|
#define FW_USB_SPEED FW_REG(1)
|
|
|
|
#define FW_FIX_TX_RATE FW_REG(2)
|
|
|
|
/* Seems to be able to control LEDs over the firmware */
|
|
|
|
#define FW_LINK_STATUS FW_REG(3)
|
|
|
|
#define FW_SOFT_RESET FW_REG(4)
|
|
|
|
#define FW_FLASH_CHK FW_REG(5)
|
|
|
|
|
|
|
|
enum {
|
|
|
|
CR_BASE_OFFSET = 0x9000,
|
|
|
|
FW_START_OFFSET = 0xee00,
|
|
|
|
FW_BASE_ADDR_OFFSET = FW_START_OFFSET + 0x1d,
|
|
|
|
EEPROM_START_OFFSET = 0xf800,
|
|
|
|
EEPROM_SIZE = 0x800, /* words */
|
|
|
|
LOAD_CODE_SIZE = 0xe, /* words */
|
|
|
|
LOAD_VECT_SIZE = 0x10000 - 0xfff7, /* words */
|
|
|
|
EEPROM_REGS_OFFSET = LOAD_CODE_SIZE + LOAD_VECT_SIZE,
|
|
|
|
E2P_BASE_OFFSET = EEPROM_START_OFFSET +
|
|
|
|
EEPROM_REGS_OFFSET,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define FW_REG_TABLE_ADDR USB_ADDR(FW_START_OFFSET + 0x1d)
|
|
|
|
|
|
|
|
enum {
|
|
|
|
/* indices for ofdm_cal_values */
|
|
|
|
OFDM_36M_INDEX = 0,
|
|
|
|
OFDM_48M_INDEX = 1,
|
|
|
|
OFDM_54M_INDEX = 2,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct zd_chip {
|
|
|
|
struct zd_usb usb;
|
|
|
|
struct zd_rf rf;
|
|
|
|
struct mutex mutex;
|
|
|
|
u8 e2p_mac[ETH_ALEN];
|
|
|
|
/* EepSetPoint in the vendor driver */
|
|
|
|
u8 pwr_cal_values[E2P_CHANNEL_COUNT];
|
|
|
|
/* integration values in the vendor driver */
|
|
|
|
u8 pwr_int_values[E2P_CHANNEL_COUNT];
|
|
|
|
/* SetPointOFDM in the vendor driver */
|
|
|
|
u8 ofdm_cal_values[3][E2P_CHANNEL_COUNT];
|
|
|
|
u8 pa_type:4, patch_cck_gain:1, patch_cr157:1, patch_6m_band_edge:1,
|
|
|
|
is_zd1211b:1;
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline struct zd_chip *zd_usb_to_chip(struct zd_usb *usb)
|
|
|
|
{
|
|
|
|
return container_of(usb, struct zd_chip, usb);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct zd_chip *zd_rf_to_chip(struct zd_rf *rf)
|
|
|
|
{
|
|
|
|
return container_of(rf, struct zd_chip, rf);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define zd_chip_dev(chip) (&(chip)->usb.intf->dev)
|
|
|
|
|
|
|
|
void zd_chip_init(struct zd_chip *chip,
|
|
|
|
struct net_device *netdev,
|
|
|
|
struct usb_interface *intf);
|
|
|
|
void zd_chip_clear(struct zd_chip *chip);
|
|
|
|
int zd_chip_init_hw(struct zd_chip *chip, u8 device_type);
|
|
|
|
int zd_chip_reset(struct zd_chip *chip);
|
|
|
|
|
|
|
|
static inline int zd_ioread16v_locked(struct zd_chip *chip, u16 *values,
|
|
|
|
const zd_addr_t *addresses,
|
|
|
|
unsigned int count)
|
|
|
|
{
|
|
|
|
ZD_ASSERT(mutex_is_locked(&chip->mutex));
|
|
|
|
return zd_usb_ioread16v(&chip->usb, values, addresses, count);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int zd_ioread16_locked(struct zd_chip *chip, u16 *value,
|
|
|
|
const zd_addr_t addr)
|
|
|
|
{
|
|
|
|
ZD_ASSERT(mutex_is_locked(&chip->mutex));
|
|
|
|
return zd_usb_ioread16(&chip->usb, value, addr);
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_ioread32v_locked(struct zd_chip *chip, u32 *values,
|
|
|
|
const zd_addr_t *addresses, unsigned int count);
|
|
|
|
|
|
|
|
static inline int zd_ioread32_locked(struct zd_chip *chip, u32 *value,
|
|
|
|
const zd_addr_t addr)
|
|
|
|
{
|
|
|
|
return zd_ioread32v_locked(chip, value, (const zd_addr_t *)&addr, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int zd_iowrite16_locked(struct zd_chip *chip, u16 value,
|
|
|
|
zd_addr_t addr)
|
|
|
|
{
|
|
|
|
struct zd_ioreq16 ioreq;
|
|
|
|
|
|
|
|
ZD_ASSERT(mutex_is_locked(&chip->mutex));
|
|
|
|
ioreq.addr = addr;
|
|
|
|
ioreq.value = value;
|
|
|
|
|
|
|
|
return zd_usb_iowrite16v(&chip->usb, &ioreq, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_iowrite16a_locked(struct zd_chip *chip,
|
|
|
|
const struct zd_ioreq16 *ioreqs, unsigned int count);
|
|
|
|
|
|
|
|
int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs,
|
|
|
|
unsigned int count);
|
|
|
|
|
|
|
|
static inline int zd_iowrite32_locked(struct zd_chip *chip, u32 value,
|
|
|
|
zd_addr_t addr)
|
|
|
|
{
|
|
|
|
struct zd_ioreq32 ioreq;
|
|
|
|
|
|
|
|
ioreq.addr = addr;
|
|
|
|
ioreq.value = value;
|
|
|
|
|
|
|
|
return _zd_iowrite32v_locked(chip, &ioreq, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_iowrite32a_locked(struct zd_chip *chip,
|
|
|
|
const struct zd_ioreq32 *ioreqs, unsigned int count);
|
|
|
|
|
|
|
|
static inline int zd_rfwrite_locked(struct zd_chip *chip, u32 value, u8 bits)
|
|
|
|
{
|
|
|
|
ZD_ASSERT(mutex_is_locked(&chip->mutex));
|
|
|
|
return zd_usb_rfwrite(&chip->usb, value, bits);
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_rfwritev_locked(struct zd_chip *chip,
|
|
|
|
const u32* values, unsigned int count, u8 bits);
|
|
|
|
|
|
|
|
/* Locking functions for reading and writing registers.
|
|
|
|
* The different parameters are intentional.
|
|
|
|
*/
|
|
|
|
int zd_ioread16(struct zd_chip *chip, zd_addr_t addr, u16 *value);
|
|
|
|
int zd_iowrite16(struct zd_chip *chip, zd_addr_t addr, u16 value);
|
|
|
|
int zd_ioread32(struct zd_chip *chip, zd_addr_t addr, u32 *value);
|
|
|
|
int zd_iowrite32(struct zd_chip *chip, zd_addr_t addr, u32 value);
|
|
|
|
int zd_ioread32v(struct zd_chip *chip, const zd_addr_t *addresses,
|
|
|
|
u32 *values, unsigned int count);
|
|
|
|
int zd_iowrite32a(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs,
|
|
|
|
unsigned int count);
|
|
|
|
|
|
|
|
int zd_chip_set_channel(struct zd_chip *chip, u8 channel);
|
|
|
|
static inline u8 _zd_chip_get_channel(struct zd_chip *chip)
|
|
|
|
{
|
|
|
|
return chip->rf.channel;
|
|
|
|
}
|
|
|
|
u8 zd_chip_get_channel(struct zd_chip *chip);
|
|
|
|
int zd_read_regdomain(struct zd_chip *chip, u8 *regdomain);
|
|
|
|
void zd_get_e2p_mac_addr(struct zd_chip *chip, u8 *mac_addr);
|
|
|
|
int zd_read_mac_addr(struct zd_chip *chip, u8 *mac_addr);
|
|
|
|
int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr);
|
|
|
|
int zd_chip_switch_radio_on(struct zd_chip *chip);
|
|
|
|
int zd_chip_switch_radio_off(struct zd_chip *chip);
|
|
|
|
int zd_chip_enable_int(struct zd_chip *chip);
|
|
|
|
void zd_chip_disable_int(struct zd_chip *chip);
|
|
|
|
int zd_chip_enable_rx(struct zd_chip *chip);
|
|
|
|
void zd_chip_disable_rx(struct zd_chip *chip);
|
|
|
|
int zd_chip_enable_hwint(struct zd_chip *chip);
|
|
|
|
int zd_chip_disable_hwint(struct zd_chip *chip);
|
|
|
|
|
|
|
|
static inline int zd_get_encryption_type(struct zd_chip *chip, u32 *type)
|
|
|
|
{
|
|
|
|
return zd_ioread32(chip, CR_ENCRYPTION_TYPE, type);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int zd_set_encryption_type(struct zd_chip *chip, u32 type)
|
|
|
|
{
|
|
|
|
return zd_iowrite32(chip, CR_ENCRYPTION_TYPE, type);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int zd_chip_get_basic_rates(struct zd_chip *chip, u16 *cr_rates)
|
|
|
|
{
|
|
|
|
return zd_ioread16(chip, CR_BASIC_RATE_TBL, cr_rates);
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates);
|
|
|
|
|
|
|
|
static inline int zd_chip_set_rx_filter(struct zd_chip *chip, u32 filter)
|
|
|
|
{
|
|
|
|
return zd_iowrite32(chip, CR_RX_FILTER, filter);
|
|
|
|
}
|
|
|
|
|
|
|
|
int zd_chip_lock_phy_regs(struct zd_chip *chip);
|
|
|
|
int zd_chip_unlock_phy_regs(struct zd_chip *chip);
|
|
|
|
|
|
|
|
enum led_status {
|
|
|
|
LED_OFF = 0,
|
|
|
|
LED_ON = 1,
|
|
|
|
LED_FLIP = 2,
|
|
|
|
LED_STATUS = 3,
|
|
|
|
};
|
|
|
|
|
|
|
|
int zd_chip_led_status(struct zd_chip *chip, int led, enum led_status status);
|
|
|
|
int zd_chip_led_flip(struct zd_chip *chip, int led,
|
|
|
|
const unsigned int *phases_msecs, unsigned int count);
|
|
|
|
|
|
|
|
int zd_set_beacon_interval(struct zd_chip *chip, u32 interval);
|
|
|
|
|
|
|
|
static inline int zd_get_beacon_interval(struct zd_chip *chip, u32 *interval)
|
|
|
|
{
|
|
|
|
return zd_ioread32(chip, CR_BCN_INTERVAL, interval);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct rx_status;
|
|
|
|
|
|
|
|
u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
|
|
|
|
const struct rx_status *status);
|
|
|
|
u8 zd_rx_strength_percent(u8 rssi);
|
|
|
|
|
|
|
|
u16 zd_rx_rate(const void *rx_frame, const struct rx_status *status);
|
|
|
|
|
|
|
|
#endif /* _ZD_CHIP_H */
|