linux/drivers/gpu/drm/drm_crtc_helper.c

1251 lines
37 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006-2008 Intel Corporation
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
*
* DRM core CRTC related functions
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*
* Authors:
* Keith Packard
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/export.h>
#include <linux/moduleparam.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_edid.h>
MODULE_AUTHOR("David Airlie, Jesse Barnes");
MODULE_DESCRIPTION("DRM KMS helper");
MODULE_LICENSE("GPL and additional rights");
/**
* drm_helper_move_panel_connectors_to_head() - move panels to the front in the
* connector list
* @dev: drm device to operate on
*
* Some userspace presumes that the first connected connector is the main
* display, where it's supposed to display e.g. the login screen. For
* laptops, this should be the main panel. Use this function to sort all
* (eDP/LVDS) panels to the front of the connector list, instead of
* painstakingly trying to initialize them in the right order.
*/
void drm_helper_move_panel_connectors_to_head(struct drm_device *dev)
{
struct drm_connector *connector, *tmp;
struct list_head panel_list;
INIT_LIST_HEAD(&panel_list);
list_for_each_entry_safe(connector, tmp,
&dev->mode_config.connector_list, head) {
if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
connector->connector_type == DRM_MODE_CONNECTOR_eDP)
list_move_tail(&connector->head, &panel_list);
}
list_splice(&panel_list, &dev->mode_config.connector_list);
}
EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head);
static bool drm_kms_helper_poll = true;
module_param_named(poll, drm_kms_helper_poll, bool, 0600);
static void drm_mode_validate_flag(struct drm_connector *connector,
int flags)
{
struct drm_display_mode *mode;
if (flags == (DRM_MODE_FLAG_DBLSCAN | DRM_MODE_FLAG_INTERLACE |
DRM_MODE_FLAG_3D_MASK))
return;
list_for_each_entry(mode, &connector->modes, head) {
if ((mode->flags & DRM_MODE_FLAG_INTERLACE) &&
!(flags & DRM_MODE_FLAG_INTERLACE))
mode->status = MODE_NO_INTERLACE;
if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) &&
!(flags & DRM_MODE_FLAG_DBLSCAN))
mode->status = MODE_NO_DBLESCAN;
if ((mode->flags & DRM_MODE_FLAG_3D_MASK) &&
!(flags & DRM_MODE_FLAG_3D_MASK))
mode->status = MODE_NO_STEREO;
}
return;
}
/**
* drm_helper_probe_single_connector_modes - get complete set of display modes
* @connector: connector to probe
* @maxX: max width for modes
* @maxY: max height for modes
*
* Based on the helper callbacks implemented by @connector try to detect all
* valid modes. Modes will first be added to the connector's probed_modes list,
* then culled (based on validity and the @maxX, @maxY parameters) and put into
* the normal modes list.
*
* Intended to be use as a generic implementation of the ->fill_modes()
* @connector vfunc for drivers that use the crtc helpers for output mode
* filtering and detection.
drm: initial KMS config fixes When mode setting is first initialized, the driver will call into drm_helper_initial_config() to set up an initial output and framebuffer configuration. This routine is responsible for probing the available connectors, encoders, and crtcs, looking for modes and putting together something reasonable (where reasonable is defined as "allows kernel messages to be visible on as many displays as possible"). However, the code was a bit too aggressive in setting default modes when none were found on a given connector. Even if some connectors had modes, any connectors found lacking modes would have the default 800x600 mode added to their mode list, which in some cases could cause problems later down the line. In my case, the LVDS was perfectly available, but the initial config code added 800x600 modes to both of the detected but unavailable HDMI connectors (which are on my non-existent docking station). This ended up preventing later code from setting a mode on my LVDS, which is bad. This patch fixes that behavior by making the initial config code walk through the connectors first, counting the available modes, before it decides to add any default modes to a possibly connected output. It also fixes the logic in drm_target_preferred() that was causing zeroed out modes to be set as the preferred mode for a given connector, even if no modes were available. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-12 20:05:32 +00:00
*
* Returns:
* The number of modes found on @connector.
*/
drm: initial KMS config fixes When mode setting is first initialized, the driver will call into drm_helper_initial_config() to set up an initial output and framebuffer configuration. This routine is responsible for probing the available connectors, encoders, and crtcs, looking for modes and putting together something reasonable (where reasonable is defined as "allows kernel messages to be visible on as many displays as possible"). However, the code was a bit too aggressive in setting default modes when none were found on a given connector. Even if some connectors had modes, any connectors found lacking modes would have the default 800x600 mode added to their mode list, which in some cases could cause problems later down the line. In my case, the LVDS was perfectly available, but the initial config code added 800x600 modes to both of the detected but unavailable HDMI connectors (which are on my non-existent docking station). This ended up preventing later code from setting a mode on my LVDS, which is bad. This patch fixes that behavior by making the initial config code walk through the connectors first, counting the available modes, before it decides to add any default modes to a possibly connected output. It also fixes the logic in drm_target_preferred() that was causing zeroed out modes to be set as the preferred mode for a given connector, even if no modes were available. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-12 20:05:32 +00:00
int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
uint32_t maxX, uint32_t maxY)
{
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode;
struct drm_connector_helper_funcs *connector_funcs =
connector->helper_private;
drm: initial KMS config fixes When mode setting is first initialized, the driver will call into drm_helper_initial_config() to set up an initial output and framebuffer configuration. This routine is responsible for probing the available connectors, encoders, and crtcs, looking for modes and putting together something reasonable (where reasonable is defined as "allows kernel messages to be visible on as many displays as possible"). However, the code was a bit too aggressive in setting default modes when none were found on a given connector. Even if some connectors had modes, any connectors found lacking modes would have the default 800x600 mode added to their mode list, which in some cases could cause problems later down the line. In my case, the LVDS was perfectly available, but the initial config code added 800x600 modes to both of the detected but unavailable HDMI connectors (which are on my non-existent docking station). This ended up preventing later code from setting a mode on my LVDS, which is bad. This patch fixes that behavior by making the initial config code walk through the connectors first, counting the available modes, before it decides to add any default modes to a possibly connected output. It also fixes the logic in drm_target_preferred() that was causing zeroed out modes to be set as the preferred mode for a given connector, even if no modes were available. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-12 20:05:32 +00:00
int count = 0;
int mode_flags = 0;
bool verbose_prune = true;
WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
drm_get_connector_name(connector));
/* set all modes to the unverified state */
list_for_each_entry(mode, &connector->modes, head)
mode->status = MODE_UNVERIFIED;
if (connector->force) {
if (connector->force == DRM_FORCE_ON)
connector->status = connector_status_connected;
else
connector->status = connector_status_disconnected;
if (connector->funcs->force)
connector->funcs->force(connector);
} else {
connector->status = connector->funcs->detect(connector, true);
}
drm: don't start the poll engine in probe_single_connector Actually there's a reason this stuff is there, and it's called commit e58f637bb96d5a0ae0919b9998b891d1ba7e47c9 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 20 09:13:36 2010 +0100 drm/kms: Add a module parameter to disable polling The idea has been that users can enable/disable polling at runtime. So the quick hack has been to just re-enable the output polling if xrandr asks for the latest state of the connectors. The problem with that hack is that when we force connectors to another state than what would be detected, we nicely ping-pong: - Userspace calls probe, gets the forced state, but polling starts again. - Polling notices that the state is actually different, wakes up userspace. - Repeat. As that commit already explains, the right fix would be to make the locking more fine-grained, so that hotplug detection on one output does not interfere with cursor updates on another crtc. But that is way too much work. So let's just safe this gross hack by caching the last-seen state of drm_kms_helper_poll for that driver, and only fire up the poll engine again if it changed from off to on. v2: Fixup the edge detection of drm_kms_helper_poll. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49907 Tested-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-23 18:23:36 +00:00
/* Re-enable polling in case the global poll config changed. */
if (drm_kms_helper_poll != dev->mode_config.poll_running)
drm_kms_helper_poll_enable(dev);
dev->mode_config.poll_running = drm_kms_helper_poll;
if (connector->status == connector_status_disconnected) {
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
connector->base.id, drm_get_connector_name(connector));
drm_mode_connector_update_edid_property(connector, NULL);
verbose_prune = false;
goto prune;
}
drm: allow loading an EDID as firmware to override broken monitor Broken monitors and/or broken graphic boards may send erroneous or no EDID data. This also applies to broken KVM devices that are unable to correctly forward the EDID data of the connected monitor but invent their own fantasy data. This patch allows to specify an EDID data set to be used instead of probing the monitor for it. It contains built-in data sets of frequently used screen resolutions. In addition, a particular EDID data set may be provided in the /lib/firmware directory and loaded via the firmware interface. The name is passed to the kernel as module parameter of the drm_kms_helper module either when loaded options drm_kms_helper edid_firmware=edid/1280x1024.bin or as kernel commandline parameter drm_kms_helper.edid_firmware=edid/1280x1024.bin It is also possible to restrict the usage of a specified EDID data set to a particular connector. This is done by prepending the name of the connector to the name of the EDID data set using the syntax edid_firmware=[<connector>:]<edid> such as, for example, edid_firmware=DVI-I-1:edid/1920x1080.bin in which case no other connector will be affected. The built-in data sets are Resolution Name -------------------------------- 1024x768 edid/1024x768.bin 1280x1024 edid/1280x1024.bin 1680x1050 edid/1680x1050.bin 1920x1080 edid/1920x1080.bin They are ignored, if a file with the same name is available in the /lib/firmware directory. The built-in EDID data sets are based on standard timings that may not apply to a particular monitor and even crash it. Ideally, EDID data of the connected monitor should be used. They may be obtained through the drm/cardX/cardX-<connector>/edid entry in the /sys/devices PCI directory of a correctly working graphics adapter. It is even possible to specify the name of an EDID data set on-the-fly via the /sys/module interface, e.g. echo edid/myedid.bin >/sys/module/drm_kms_helper/parameters/edid_firmware The new screen mode is considered when the related kernel function is called for the first time after the change. Such calls are made when the X server is started or when the display settings dialog is opened in an already running X server. Signed-off-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-18 21:37:33 +00:00
#ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE
count = drm_load_edid_firmware(connector);
if (count == 0)
#endif
count = (*connector_funcs->get_modes)(connector);
if (count == 0 && connector->status == connector_status_connected)
count = drm_add_modes_noedid(connector, 1024, 768);
if (count == 0)
goto prune;
drm: initial KMS config fixes When mode setting is first initialized, the driver will call into drm_helper_initial_config() to set up an initial output and framebuffer configuration. This routine is responsible for probing the available connectors, encoders, and crtcs, looking for modes and putting together something reasonable (where reasonable is defined as "allows kernel messages to be visible on as many displays as possible"). However, the code was a bit too aggressive in setting default modes when none were found on a given connector. Even if some connectors had modes, any connectors found lacking modes would have the default 800x600 mode added to their mode list, which in some cases could cause problems later down the line. In my case, the LVDS was perfectly available, but the initial config code added 800x600 modes to both of the detected but unavailable HDMI connectors (which are on my non-existent docking station). This ended up preventing later code from setting a mode on my LVDS, which is bad. This patch fixes that behavior by making the initial config code walk through the connectors first, counting the available modes, before it decides to add any default modes to a possibly connected output. It also fixes the logic in drm_target_preferred() that was causing zeroed out modes to be set as the preferred mode for a given connector, even if no modes were available. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-12 20:05:32 +00:00
drm_mode_connector_list_update(connector);
if (maxX && maxY)
drm_mode_validate_size(dev, &connector->modes, maxX, maxY);
if (connector->interlace_allowed)
mode_flags |= DRM_MODE_FLAG_INTERLACE;
if (connector->doublescan_allowed)
mode_flags |= DRM_MODE_FLAG_DBLSCAN;
if (connector->stereo_allowed)
mode_flags |= DRM_MODE_FLAG_3D_MASK;
drm_mode_validate_flag(connector, mode_flags);
list_for_each_entry(mode, &connector->modes, head) {
if (mode->status == MODE_OK)
mode->status = connector_funcs->mode_valid(connector,
mode);
}
prune:
drm_mode_prune_invalid(dev, &connector->modes, verbose_prune);
drm: initial KMS config fixes When mode setting is first initialized, the driver will call into drm_helper_initial_config() to set up an initial output and framebuffer configuration. This routine is responsible for probing the available connectors, encoders, and crtcs, looking for modes and putting together something reasonable (where reasonable is defined as "allows kernel messages to be visible on as many displays as possible"). However, the code was a bit too aggressive in setting default modes when none were found on a given connector. Even if some connectors had modes, any connectors found lacking modes would have the default 800x600 mode added to their mode list, which in some cases could cause problems later down the line. In my case, the LVDS was perfectly available, but the initial config code added 800x600 modes to both of the detected but unavailable HDMI connectors (which are on my non-existent docking station). This ended up preventing later code from setting a mode on my LVDS, which is bad. This patch fixes that behavior by making the initial config code walk through the connectors first, counting the available modes, before it decides to add any default modes to a possibly connected output. It also fixes the logic in drm_target_preferred() that was causing zeroed out modes to be set as the preferred mode for a given connector, even if no modes were available. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-12 20:05:32 +00:00
if (list_empty(&connector->modes))
return 0;
list_for_each_entry(mode, &connector->modes, head)
mode->vrefresh = drm_mode_vrefresh(mode);
drm_mode_sort(&connector->modes);
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id,
drm_get_connector_name(connector));
list_for_each_entry(mode, &connector->modes, head) {
drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
drm_mode_debug_printmodeline(mode);
}
drm: initial KMS config fixes When mode setting is first initialized, the driver will call into drm_helper_initial_config() to set up an initial output and framebuffer configuration. This routine is responsible for probing the available connectors, encoders, and crtcs, looking for modes and putting together something reasonable (where reasonable is defined as "allows kernel messages to be visible on as many displays as possible"). However, the code was a bit too aggressive in setting default modes when none were found on a given connector. Even if some connectors had modes, any connectors found lacking modes would have the default 800x600 mode added to their mode list, which in some cases could cause problems later down the line. In my case, the LVDS was perfectly available, but the initial config code added 800x600 modes to both of the detected but unavailable HDMI connectors (which are on my non-existent docking station). This ended up preventing later code from setting a mode on my LVDS, which is bad. This patch fixes that behavior by making the initial config code walk through the connectors first, counting the available modes, before it decides to add any default modes to a possibly connected output. It also fixes the logic in drm_target_preferred() that was causing zeroed out modes to be set as the preferred mode for a given connector, even if no modes were available. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-12 20:05:32 +00:00
return count;
}
EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
/**
* drm_helper_encoder_in_use - check if a given encoder is in use
* @encoder: encoder to check
*
* Checks whether @encoder is with the current mode setting output configuration
* in use by any connector. This doesn't mean that it is actually enabled since
* the DPMS state is tracked separately.
*
* Returns:
* True if @encoder is used, false otherwise.
*/
bool drm_helper_encoder_in_use(struct drm_encoder *encoder)
{
struct drm_connector *connector;
struct drm_device *dev = encoder->dev;
WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
list_for_each_entry(connector, &dev->mode_config.connector_list, head)
if (connector->encoder == encoder)
return true;
return false;
}
EXPORT_SYMBOL(drm_helper_encoder_in_use);
/**
* drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
* @crtc: CRTC to check
*
* Checks whether @crtc is with the current mode setting output configuration
* in use by any connector. This doesn't mean that it is actually enabled since
* the DPMS state is tracked separately.
*
* Returns:
* True if @crtc is used, false otherwise.
*/
bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
{
struct drm_encoder *encoder;
struct drm_device *dev = crtc->dev;
WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder))
return true;
return false;
}
EXPORT_SYMBOL(drm_helper_crtc_in_use);
static void
drm_encoder_disable(struct drm_encoder *encoder)
{
struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
if (encoder->bridge)
encoder->bridge->funcs->disable(encoder->bridge);
if (encoder_funcs->disable)
(*encoder_funcs->disable)(encoder);
else
(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
if (encoder->bridge)
encoder->bridge->funcs->post_disable(encoder->bridge);
}
drm/crtc-helper: fix locking for drm_helper_disable_unused_functions We have two calling contexts for thise function: - In the crtc helper code itself as part of the ->set_config implementation. In this calling context all modeset locks are already held, as they should. - In drivers not implementing fastboot before the fbdev/fbcon setup and initialization. This has been added for all drivers in commit 76a39dbfb2d1bc45219839e5a95d4ceaf6ca114f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Jan 20 23:12:54 2013 +0100 drm/fb-helper: don't disable everything in initial_config In this calling context we do not hold any modeset locks since the immediately following call to initialize the fbev emulation grabs all these locks themselves. - There are two exceptions to the above rule: shmob doesn't have fbdev emulation support. I've manually checked the callchain up to the driver load function and no kms locks are held. The right fix therefore is to split this helper into an internal and external version and add the required locking to the function exported to drivers. This remedies locking inconsistencies exposed by me adding locking WARNs as part of the recent kerneldoc abi polishing done in commit 62ff94a5492175759546f8bc61383189d6b49122 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 22:18:47 2014 +0100 drm/crtc-helper: remove LOCKING from kerneldoc and commit 63951385052f7974155fa38f962f0f4e9847f90a Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 15:14:15 2014 +0100 drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c v2: It helps when I actually git add the entire thing. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-20 13:26:34 +00:00
static void __drm_helper_disable_unused_functions(struct drm_device *dev)
{
struct drm_encoder *encoder;
struct drm_connector *connector;
struct drm_crtc *crtc;
drm_warn_on_modeset_not_all_locked(dev);
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (!connector->encoder)
continue;
if (connector->status == connector_status_disconnected)
connector->encoder = NULL;
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (!drm_helper_encoder_in_use(encoder)) {
drm_encoder_disable(encoder);
/* disconnector encoder from any connector */
encoder->crtc = NULL;
}
}
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
crtc->enabled = drm_helper_crtc_in_use(crtc);
if (!crtc->enabled) {
if (crtc_funcs->disable)
(*crtc_funcs->disable)(crtc);
else
(*crtc_funcs->dpms)(crtc, DRM_MODE_DPMS_OFF);
crtc->fb = NULL;
}
}
}
drm/crtc-helper: fix locking for drm_helper_disable_unused_functions We have two calling contexts for thise function: - In the crtc helper code itself as part of the ->set_config implementation. In this calling context all modeset locks are already held, as they should. - In drivers not implementing fastboot before the fbdev/fbcon setup and initialization. This has been added for all drivers in commit 76a39dbfb2d1bc45219839e5a95d4ceaf6ca114f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Jan 20 23:12:54 2013 +0100 drm/fb-helper: don't disable everything in initial_config In this calling context we do not hold any modeset locks since the immediately following call to initialize the fbev emulation grabs all these locks themselves. - There are two exceptions to the above rule: shmob doesn't have fbdev emulation support. I've manually checked the callchain up to the driver load function and no kms locks are held. The right fix therefore is to split this helper into an internal and external version and add the required locking to the function exported to drivers. This remedies locking inconsistencies exposed by me adding locking WARNs as part of the recent kerneldoc abi polishing done in commit 62ff94a5492175759546f8bc61383189d6b49122 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 22:18:47 2014 +0100 drm/crtc-helper: remove LOCKING from kerneldoc and commit 63951385052f7974155fa38f962f0f4e9847f90a Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 15:14:15 2014 +0100 drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c v2: It helps when I actually git add the entire thing. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-20 13:26:34 +00:00
/**
* drm_helper_disable_unused_functions - disable unused objects
* @dev: DRM device
*
* This function walks through the entire mode setting configuration of @dev. It
* will remove any crtc links of unused encoders and encoder links of
* disconnected connectors. Then it will disable all unused encoders and crtcs
* either by calling their disable callback if available or by calling their
* dpms callback with DRM_MODE_DPMS_OFF.
*/
void drm_helper_disable_unused_functions(struct drm_device *dev)
{
drm_modeset_lock_all(dev);
__drm_helper_disable_unused_functions(dev);
drm_modeset_unlock_all(dev);
}
EXPORT_SYMBOL(drm_helper_disable_unused_functions);
/*
* Check the CRTC we're going to map each output to vs. its current
* CRTC. If they don't match, we have to disable the output and the CRTC
* since the driver will have to re-route things.
*/
static void
drm_crtc_prepare_encoders(struct drm_device *dev)
{
struct drm_encoder_helper_funcs *encoder_funcs;
struct drm_encoder *encoder;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
encoder_funcs = encoder->helper_private;
/* Disable unused encoders */
if (encoder->crtc == NULL)
drm_encoder_disable(encoder);
/* Disable encoders whose CRTC is about to change */
if (encoder_funcs->get_crtc &&
encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
drm_encoder_disable(encoder);
}
}
/**
* drm_crtc_helper_set_mode - internal helper to set a mode
* @crtc: CRTC to program
* @mode: mode to use
* @x: horizontal offset into the surface
* @y: vertical offset into the surface
* @old_fb: old framebuffer, for cleanup
*
* Try to set @mode on @crtc. Give @crtc and its associated connectors a chance
* to fixup or reject the mode prior to trying to set it. This is an internal
* helper that drivers could e.g. use to update properties that require the
* entire output pipe to be disabled and re-enabled in a new configuration. For
* example for changing whether audio is enabled on a hdmi link or for changing
* panel fitter or dither attributes. It is also called by the
* drm_crtc_helper_set_config() helper function to drive the mode setting
* sequence.
*
* Returns:
* True if the mode was set successfully, false otherwise.
*/
bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
struct drm_display_mode *mode,
int x, int y,
struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct drm_display_mode *adjusted_mode, saved_mode;
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
struct drm_encoder_helper_funcs *encoder_funcs;
int saved_x, saved_y;
bool saved_enabled;
struct drm_encoder *encoder;
bool ret = true;
drm_warn_on_modeset_not_all_locked(dev);
saved_enabled = crtc->enabled;
crtc->enabled = drm_helper_crtc_in_use(crtc);
if (!crtc->enabled)
return true;
adjusted_mode = drm_mode_duplicate(dev, mode);
if (!adjusted_mode) {
crtc->enabled = saved_enabled;
return false;
}
saved_mode = crtc->mode;
saved_x = crtc->x;
saved_y = crtc->y;
/* Update crtc values up front so the driver can rely on them for mode
* setting.
*/
crtc->mode = *mode;
crtc->x = x;
crtc->y = y;
/* Pass our mode to the connectors and the CRTC to give them a chance to
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
*/
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc != crtc)
continue;
if (encoder->bridge && encoder->bridge->funcs->mode_fixup) {
ret = encoder->bridge->funcs->mode_fixup(
encoder->bridge, mode, adjusted_mode);
if (!ret) {
DRM_DEBUG_KMS("Bridge fixup failed\n");
goto done;
}
}
encoder_funcs = encoder->helper_private;
if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
adjusted_mode))) {
DRM_DEBUG_KMS("Encoder fixup failed\n");
goto done;
}
}
if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) {
DRM_DEBUG_KMS("CRTC fixup failed\n");
goto done;
}
DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
/* Prepare the encoders and CRTCs before setting the mode. */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc != crtc)
continue;
if (encoder->bridge)
encoder->bridge->funcs->disable(encoder->bridge);
encoder_funcs = encoder->helper_private;
/* Disable the encoders as the first thing we do. */
encoder_funcs->prepare(encoder);
if (encoder->bridge)
encoder->bridge->funcs->post_disable(encoder->bridge);
}
drm_crtc_prepare_encoders(dev);
crtc_funcs->prepare(crtc);
/* Set up the DPLL and any encoders state that needs to adjust or depend
* on the DPLL.
*/
ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
if (!ret)
goto done;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc != crtc)
continue;
DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
encoder->base.id, drm_get_encoder_name(encoder),
mode->base.id, mode->name);
encoder_funcs = encoder->helper_private;
encoder_funcs->mode_set(encoder, mode, adjusted_mode);
if (encoder->bridge && encoder->bridge->funcs->mode_set)
encoder->bridge->funcs->mode_set(encoder->bridge, mode,
adjusted_mode);
}
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
crtc_funcs->commit(crtc);
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc != crtc)
continue;
if (encoder->bridge)
encoder->bridge->funcs->pre_enable(encoder->bridge);
encoder_funcs = encoder->helper_private;
encoder_funcs->commit(encoder);
if (encoder->bridge)
encoder->bridge->funcs->enable(encoder->bridge);
}
drm/vblank: Add support for precise vblank timestamping. The DRI2 swap & sync implementation needs precise vblank counts and precise timestamps corresponding to those vblank counts. For conformance to the OpenML OML_sync_control extension specification the DRM timestamp associated with a vblank count should correspond to the start of video scanout of the first scanline of the video frame following the vblank interval for that vblank count. Therefore we need to carry around precise timestamps for vblanks. Currently the DRM and KMS drivers generate timestamps ad-hoc via do_gettimeofday() in some places. The resulting timestamps are sometimes not very precise due to interrupt handling delays, they don't conform to OML_sync_control and some are wrong, as they aren't taken synchronized to the vblank. This patch implements support inside the drm core for precise and robust timestamping. It consists of the following interrelated pieces. 1. Vblank timestamp caching: A per-crtc ringbuffer stores the most recent vblank timestamps corresponding to vblank counts. The ringbuffer can be read out lock-free via the accessor function: struct timeval timestamp; vblankcount = drm_vblank_count_and_time(dev, crtcid, &timestamp). The function returns the current vblank count and the corresponding timestamp for start of video scanout following the vblank interval. It can be used anywhere between enclosing drm_vblank_get(dev, crtcid) and drm_vblank_put(dev,crtcid) statements. It is used inside the drmWaitVblank ioctl and in the vblank event queueing and handling. It should be used by kms drivers for timestamping of bufferswap completion. The timestamp ringbuffer is reinitialized each time vblank irq's get reenabled in drm_vblank_get()/ drm_update_vblank_count(). It is invalidated when vblank irq's get disabled. The ringbuffer is updated inside drm_handle_vblank() at each vblank irq. 2. Calculation of precise vblank timestamps: drm_get_last_vbltimestamp() is used to compute the timestamp for the end of the most recent vblank (if inside active scanout), or the expected end of the current vblank interval (if called inside a vblank interval). The function calls into a new optional kms driver entry point dev->driver->get_vblank_timestamp() which is supposed to provide the precise timestamp. If a kms driver doesn't implement the entry point or if the call fails, a simple do_gettimeofday() timestamp is returned as crude approximation of the true vblank time. A new drm module parameter drm.timestamp_precision_usec allows to disable high precision timestamps (if set to zero) or to specify the maximum acceptable error in the timestamps in microseconds. Kms drivers could implement their get_vblank_timestamp() function in a gpu specific way, as long as returned timestamps conform to OML_sync_control, e.g., by use of gpu specific hardware timestamps. Optionally, kms drivers can simply wrap and use the new utility function drm_calc_vbltimestamp_from_scanoutpos(). This function calls a new optional kms driver function dev->driver->get_scanout_position() which returns the current horizontal and vertical video scanout position of the crtc. The scanout position together with the drm_display_timing of the current video mode is used to calculate elapsed time relative to start of active scanout for the current video frame. This elapsed time is subtracted from the current do_gettimeofday() time to get the timestamp corresponding to start of video scanout. Currently non-interlaced, non-doublescan video modes, with or without panel scaling are handled correctly. Interlaced/ doublescan modes are tbd in a future patch. 3. Filtering of redundant vblank irq's and removal of some race-conditions in the vblank irq enable/disable path: Some gpu's (e.g., Radeon R500/R600) send spurious vblank irq's outside the vblank if vblank irq's get reenabled. These get detected by use of the vblank timestamps and filtered out to avoid miscounting of vblanks. Some race-conditions between the vblank irq enable/disable functions, the vblank irq handler and the gpu itself (updating its hardware vblank counter in the "wrong" moment) are fixed inside vblank_disable_and_save() and drm_update_vblank_count() by use of the vblank timestamps and a new spinlock dev->vblank_time_lock. The time until vblank irq disable is now configurable via a new drm module parameter drm.vblankoffdelay to allow experimentation with timeouts that are much shorter than the current 5 seconds and should allow longer vblank off periods for better power savings. Followup patches will use these new functions to implement precise timestamping for the intel and radeon kms drivers. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-23 02:20:23 +00:00
/* Store real post-adjustment hardware mode. */
crtc->hwmode = *adjusted_mode;
/* Calculate and store various constants which
* are later needed by vblank and swap-completion
* timestamping. They are derived from true hwmode.
*/
drm_calc_timestamping_constants(crtc, &crtc->hwmode);
drm/vblank: Add support for precise vblank timestamping. The DRI2 swap & sync implementation needs precise vblank counts and precise timestamps corresponding to those vblank counts. For conformance to the OpenML OML_sync_control extension specification the DRM timestamp associated with a vblank count should correspond to the start of video scanout of the first scanline of the video frame following the vblank interval for that vblank count. Therefore we need to carry around precise timestamps for vblanks. Currently the DRM and KMS drivers generate timestamps ad-hoc via do_gettimeofday() in some places. The resulting timestamps are sometimes not very precise due to interrupt handling delays, they don't conform to OML_sync_control and some are wrong, as they aren't taken synchronized to the vblank. This patch implements support inside the drm core for precise and robust timestamping. It consists of the following interrelated pieces. 1. Vblank timestamp caching: A per-crtc ringbuffer stores the most recent vblank timestamps corresponding to vblank counts. The ringbuffer can be read out lock-free via the accessor function: struct timeval timestamp; vblankcount = drm_vblank_count_and_time(dev, crtcid, &timestamp). The function returns the current vblank count and the corresponding timestamp for start of video scanout following the vblank interval. It can be used anywhere between enclosing drm_vblank_get(dev, crtcid) and drm_vblank_put(dev,crtcid) statements. It is used inside the drmWaitVblank ioctl and in the vblank event queueing and handling. It should be used by kms drivers for timestamping of bufferswap completion. The timestamp ringbuffer is reinitialized each time vblank irq's get reenabled in drm_vblank_get()/ drm_update_vblank_count(). It is invalidated when vblank irq's get disabled. The ringbuffer is updated inside drm_handle_vblank() at each vblank irq. 2. Calculation of precise vblank timestamps: drm_get_last_vbltimestamp() is used to compute the timestamp for the end of the most recent vblank (if inside active scanout), or the expected end of the current vblank interval (if called inside a vblank interval). The function calls into a new optional kms driver entry point dev->driver->get_vblank_timestamp() which is supposed to provide the precise timestamp. If a kms driver doesn't implement the entry point or if the call fails, a simple do_gettimeofday() timestamp is returned as crude approximation of the true vblank time. A new drm module parameter drm.timestamp_precision_usec allows to disable high precision timestamps (if set to zero) or to specify the maximum acceptable error in the timestamps in microseconds. Kms drivers could implement their get_vblank_timestamp() function in a gpu specific way, as long as returned timestamps conform to OML_sync_control, e.g., by use of gpu specific hardware timestamps. Optionally, kms drivers can simply wrap and use the new utility function drm_calc_vbltimestamp_from_scanoutpos(). This function calls a new optional kms driver function dev->driver->get_scanout_position() which returns the current horizontal and vertical video scanout position of the crtc. The scanout position together with the drm_display_timing of the current video mode is used to calculate elapsed time relative to start of active scanout for the current video frame. This elapsed time is subtracted from the current do_gettimeofday() time to get the timestamp corresponding to start of video scanout. Currently non-interlaced, non-doublescan video modes, with or without panel scaling are handled correctly. Interlaced/ doublescan modes are tbd in a future patch. 3. Filtering of redundant vblank irq's and removal of some race-conditions in the vblank irq enable/disable path: Some gpu's (e.g., Radeon R500/R600) send spurious vblank irq's outside the vblank if vblank irq's get reenabled. These get detected by use of the vblank timestamps and filtered out to avoid miscounting of vblanks. Some race-conditions between the vblank irq enable/disable functions, the vblank irq handler and the gpu itself (updating its hardware vblank counter in the "wrong" moment) are fixed inside vblank_disable_and_save() and drm_update_vblank_count() by use of the vblank timestamps and a new spinlock dev->vblank_time_lock. The time until vblank irq disable is now configurable via a new drm module parameter drm.vblankoffdelay to allow experimentation with timeouts that are much shorter than the current 5 seconds and should allow longer vblank off periods for better power savings. Followup patches will use these new functions to implement precise timestamping for the intel and radeon kms drivers. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-23 02:20:23 +00:00
/* FIXME: add subpixel order */
done:
drm_mode_destroy(dev, adjusted_mode);
if (!ret) {
crtc->enabled = saved_enabled;
crtc->mode = saved_mode;
crtc->x = saved_x;
crtc->y = saved_y;
}
return ret;
}
EXPORT_SYMBOL(drm_crtc_helper_set_mode);
static int
drm_crtc_helper_disable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_connector *connector;
struct drm_encoder *encoder;
/* Decouple all encoders and their attached connectors from this crtc */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if (encoder->crtc != crtc)
continue;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (connector->encoder != encoder)
continue;
connector->encoder = NULL;
/*
* drm_helper_disable_unused_functions() ought to be
* doing this, but since we've decoupled the encoder
* from the connector above, the required connection
* between them is henceforth no longer available.
*/
connector->dpms = DRM_MODE_DPMS_OFF;
}
}
drm/crtc-helper: fix locking for drm_helper_disable_unused_functions We have two calling contexts for thise function: - In the crtc helper code itself as part of the ->set_config implementation. In this calling context all modeset locks are already held, as they should. - In drivers not implementing fastboot before the fbdev/fbcon setup and initialization. This has been added for all drivers in commit 76a39dbfb2d1bc45219839e5a95d4ceaf6ca114f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Jan 20 23:12:54 2013 +0100 drm/fb-helper: don't disable everything in initial_config In this calling context we do not hold any modeset locks since the immediately following call to initialize the fbev emulation grabs all these locks themselves. - There are two exceptions to the above rule: shmob doesn't have fbdev emulation support. I've manually checked the callchain up to the driver load function and no kms locks are held. The right fix therefore is to split this helper into an internal and external version and add the required locking to the function exported to drivers. This remedies locking inconsistencies exposed by me adding locking WARNs as part of the recent kerneldoc abi polishing done in commit 62ff94a5492175759546f8bc61383189d6b49122 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 22:18:47 2014 +0100 drm/crtc-helper: remove LOCKING from kerneldoc and commit 63951385052f7974155fa38f962f0f4e9847f90a Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 15:14:15 2014 +0100 drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c v2: It helps when I actually git add the entire thing. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-20 13:26:34 +00:00
__drm_helper_disable_unused_functions(dev);
return 0;
}
/**
* drm_crtc_helper_set_config - set a new config from userspace
* @set: mode set configuration
*
* Setup a new configuration, provided by the upper layers (either an ioctl call
* from userspace or internally e.g. from the fbdev suppport code) in @set, and
* enable it. This is the main helper functions for drivers that implement
* kernel mode setting with the crtc helper functions and the assorted
* ->prepare(), ->modeset() and ->commit() helper callbacks.
*
* Returns:
* Returns 0 on success, negative errno numbers on failure.
*/
int drm_crtc_helper_set_config(struct drm_mode_set *set)
{
struct drm_device *dev;
struct drm_crtc *new_crtc;
struct drm_encoder *save_encoders, *new_encoder, *encoder;
bool mode_changed = false; /* if true do a full mode set */
bool fb_changed = false; /* if true and !mode_changed just do a flip */
struct drm_connector *save_connectors, *connector;
int count = 0, ro, fail = 0;
struct drm_crtc_helper_funcs *crtc_funcs;
struct drm_mode_set save_set;
int ret;
int i;
DRM_DEBUG_KMS("\n");
BUG_ON(!set);
BUG_ON(!set->crtc);
BUG_ON(!set->crtc->helper_private);
/* Enforce sane interface api - has been abused by the fb helper. */
BUG_ON(!set->mode && set->fb);
BUG_ON(set->fb && set->num_connectors == 0);
crtc_funcs = set->crtc->helper_private;
if (!set->mode)
set->fb = NULL;
if (set->fb) {
DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
set->crtc->base.id, set->fb->base.id,
(int)set->num_connectors, set->x, set->y);
} else {
DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
return drm_crtc_helper_disable(set->crtc);
}
dev = set->crtc->dev;
drm_warn_on_modeset_not_all_locked(dev);
/*
* Allocate space for the backup of all (non-pointer) encoder and
* connector data.
*/
save_encoders = kzalloc(dev->mode_config.num_encoder *
sizeof(struct drm_encoder), GFP_KERNEL);
if (!save_encoders)
return -ENOMEM;
save_connectors = kzalloc(dev->mode_config.num_connector *
sizeof(struct drm_connector), GFP_KERNEL);
if (!save_connectors) {
kfree(save_encoders);
return -ENOMEM;
}
/*
* Copy data. Note that driver private data is not affected.
* Should anything bad happen only the expected state is
* restored, not the drivers personal bookkeeping.
*/
count = 0;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
save_encoders[count++] = *encoder;
}
count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
save_connectors[count++] = *connector;
}
save_set.crtc = set->crtc;
save_set.mode = &set->crtc->mode;
save_set.x = set->crtc->x;
save_set.y = set->crtc->y;
save_set.fb = set->crtc->fb;
/* We should be able to check here if the fb has the same properties
* and then just flip_or_move it */
if (set->crtc->fb != set->fb) {
/* If we have no fb then treat it as a full mode set */
if (set->crtc->fb == NULL) {
DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
mode_changed = true;
} else if (set->fb == NULL) {
mode_changed = true;
} else if (set->fb->pixel_format !=
set->crtc->fb->pixel_format) {
mode_changed = true;
} else
fb_changed = true;
}
if (set->x != set->crtc->x || set->y != set->crtc->y)
fb_changed = true;
if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
DRM_DEBUG_KMS("modes are different, full mode set\n");
drm_mode_debug_printmodeline(&set->crtc->mode);
drm_mode_debug_printmodeline(set->mode);
mode_changed = true;
}
/* a) traverse passed in connector list and get encoders for them */
count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct drm_connector_helper_funcs *connector_funcs =
connector->helper_private;
new_encoder = connector->encoder;
for (ro = 0; ro < set->num_connectors; ro++) {
if (set->connectors[ro] == connector) {
new_encoder = connector_funcs->best_encoder(connector);
/* if we can't get an encoder for a connector
we are setting now - then fail */
if (new_encoder == NULL)
/* don't break so fail path works correct */
fail = 1;
break;
drm/crtc-helper: explicit DPMS on after modeset Atm the crtc helper implementation of set_config has really inconsisten semantics: If just an fb update is good enough, dpms state will be left as-is, but if we do a full modeset we force everything to dpms on. This change has already been applied to the i915 modeset code in commit e3de42b68478a8c95dd27520e9adead2af9477a5 Author: Imre Deak <imre.deak@intel.com> Date: Fri May 3 19:44:07 2013 +0200 drm/i915: force full modeset if the connector is in DPMS OFF mode which according to Greg KH seems to aim for a new record in most Bugzilla: links in a commit message. The history of this dpms forcing is pretty interesting. This patch here is an almost-revert of commit 811aaa55ba21ab37407018cfc01770d6b037d3fb Author: Keith Packard <keithp@keithp.com> Date: Thu Feb 3 16:57:28 2011 -0800 drm: Only set DPMS ON when actually configuring a mode which fixed the bug of trying to dpms on disabled outputs, but introduced the new discrepancy between an fb update only and full modesets. The actual introduction of this goes back to commit bf9dc102e284a5aa78c73fc9d72e11d5ccd8669f Author: Keith Packard <keithp@keithp.com> Date: Fri Nov 26 10:45:58 2010 -0800 drm: Set connector DPMS status to ON in drm_crtc_helper_set_config And if you'd dig around in the i915 driver code there's even more fun around forcing dpms on and losing our heads and temper of the resulting inconsistencies. Especially the DP re-training code had tons of funny stuff in it. v2: So v1 totally blew up on resume on my radeon system here. After much head-scraching I've figured out that the radeon resume functions resumes the console system _before_ it actually restores all the modeset state. And resuming the console systems means that fbdev doeas an immediate ->set_par call. Now up to this patch that ->set_par did absolutely nothing: All the old sw state from pre-suspend was still around (since the modeset reset wasn't done yet), which means that the set_config calls done as a result of the ->set_par where all treated as no-ops (despite that the real hw state was obviously something completely different). Since v1 of this patch just added a bunch of ->dpms calls if the crtc was enabled, those set_config calls suddenly stopped being no-ops. But because the hw state wasn't restored the ->dpms callbacks resulted in decent amounts of hilarity and eventual full hangs. Since I can't review all kms drivers for such tricky ordering constraints v2 opts for a different approach and forces a full modeset if the connector dpms state isnt' DPMS_ON. Since the ->dpms callbacks implemented by the modeset helpers update the connector->dpms property we have the same effect of ensuring that the pipe is ultimately turned on, even if we just end up updating the fb. This is the same approac we ended up using in the intel driver. Note that besides i915.ko only all other drivers eventually call drm_helper_connector_dpms with the exception of vmwgfx, which does not support dmps at all. v3: Dave Airlie merged the broken first version of this patch, so squash in the revert of commit 372835a8527f85b3eff20a18c2c339e827dfd4e4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Jun 15 00:13:13 2013 +0200 drm/crtc-helper: explicit DPMS on after modeset Also fix up the spelling fail a bit in the commit message while at it. Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67043 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-19 16:57:11 +00:00
if (connector->dpms != DRM_MODE_DPMS_ON) {
DRM_DEBUG_KMS("connector dpms not on, full mode switch\n");
mode_changed = true;
}
}
}
if (new_encoder != connector->encoder) {
DRM_DEBUG_KMS("encoder changed, full mode switch\n");
mode_changed = true;
/* If the encoder is reused for another connector, then
* the appropriate crtc will be set later.
*/
if (connector->encoder)
connector->encoder->crtc = NULL;
connector->encoder = new_encoder;
}
}
if (fail) {
ret = -EINVAL;
goto fail;
}
count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (!connector->encoder)
continue;
if (connector->encoder->crtc == set->crtc)
new_crtc = NULL;
else
new_crtc = connector->encoder->crtc;
for (ro = 0; ro < set->num_connectors; ro++) {
if (set->connectors[ro] == connector)
new_crtc = set->crtc;
}
/* Make sure the new CRTC will work with the encoder */
if (new_crtc &&
!drm_encoder_crtc_ok(connector->encoder, new_crtc)) {
ret = -EINVAL;
goto fail;
}
if (new_crtc != connector->encoder->crtc) {
DRM_DEBUG_KMS("crtc changed, full mode switch\n");
mode_changed = true;
connector->encoder->crtc = new_crtc;
}
if (new_crtc) {
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
connector->base.id, drm_get_connector_name(connector),
new_crtc->base.id);
} else {
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
connector->base.id, drm_get_connector_name(connector));
}
}
/* mode_set_base is not a required function */
if (fb_changed && !crtc_funcs->mode_set_base)
mode_changed = true;
if (mode_changed) {
if (drm_helper_crtc_in_use(set->crtc)) {
DRM_DEBUG_KMS("attempting to set mode from"
" userspace\n");
drm_mode_debug_printmodeline(set->mode);
set->crtc->fb = set->fb;
if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
set->x, set->y,
save_set.fb)) {
DRM_ERROR("failed to set mode on [CRTC:%d]\n",
set->crtc->base.id);
set->crtc->fb = save_set.fb;
ret = -EINVAL;
goto fail;
}
drm/crtc-helper: explicit DPMS on after modeset Atm the crtc helper implementation of set_config has really inconsisten semantics: If just an fb update is good enough, dpms state will be left as-is, but if we do a full modeset we force everything to dpms on. This change has already been applied to the i915 modeset code in commit e3de42b68478a8c95dd27520e9adead2af9477a5 Author: Imre Deak <imre.deak@intel.com> Date: Fri May 3 19:44:07 2013 +0200 drm/i915: force full modeset if the connector is in DPMS OFF mode which according to Greg KH seems to aim for a new record in most Bugzilla: links in a commit message. The history of this dpms forcing is pretty interesting. This patch here is an almost-revert of commit 811aaa55ba21ab37407018cfc01770d6b037d3fb Author: Keith Packard <keithp@keithp.com> Date: Thu Feb 3 16:57:28 2011 -0800 drm: Only set DPMS ON when actually configuring a mode which fixed the bug of trying to dpms on disabled outputs, but introduced the new discrepancy between an fb update only and full modesets. The actual introduction of this goes back to commit bf9dc102e284a5aa78c73fc9d72e11d5ccd8669f Author: Keith Packard <keithp@keithp.com> Date: Fri Nov 26 10:45:58 2010 -0800 drm: Set connector DPMS status to ON in drm_crtc_helper_set_config And if you'd dig around in the i915 driver code there's even more fun around forcing dpms on and losing our heads and temper of the resulting inconsistencies. Especially the DP re-training code had tons of funny stuff in it. v2: So v1 totally blew up on resume on my radeon system here. After much head-scraching I've figured out that the radeon resume functions resumes the console system _before_ it actually restores all the modeset state. And resuming the console systems means that fbdev doeas an immediate ->set_par call. Now up to this patch that ->set_par did absolutely nothing: All the old sw state from pre-suspend was still around (since the modeset reset wasn't done yet), which means that the set_config calls done as a result of the ->set_par where all treated as no-ops (despite that the real hw state was obviously something completely different). Since v1 of this patch just added a bunch of ->dpms calls if the crtc was enabled, those set_config calls suddenly stopped being no-ops. But because the hw state wasn't restored the ->dpms callbacks resulted in decent amounts of hilarity and eventual full hangs. Since I can't review all kms drivers for such tricky ordering constraints v2 opts for a different approach and forces a full modeset if the connector dpms state isnt' DPMS_ON. Since the ->dpms callbacks implemented by the modeset helpers update the connector->dpms property we have the same effect of ensuring that the pipe is ultimately turned on, even if we just end up updating the fb. This is the same approac we ended up using in the intel driver. Note that besides i915.ko only all other drivers eventually call drm_helper_connector_dpms with the exception of vmwgfx, which does not support dmps at all. v3: Dave Airlie merged the broken first version of this patch, so squash in the revert of commit 372835a8527f85b3eff20a18c2c339e827dfd4e4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Jun 15 00:13:13 2013 +0200 drm/crtc-helper: explicit DPMS on after modeset Also fix up the spelling fail a bit in the commit message while at it. Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67043 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-19 16:57:11 +00:00
DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
for (i = 0; i < set->num_connectors; i++) {
DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
drm_get_connector_name(set->connectors[i]));
set->connectors[i]->funcs->dpms(set->connectors[i], DRM_MODE_DPMS_ON);
}
}
drm/crtc-helper: fix locking for drm_helper_disable_unused_functions We have two calling contexts for thise function: - In the crtc helper code itself as part of the ->set_config implementation. In this calling context all modeset locks are already held, as they should. - In drivers not implementing fastboot before the fbdev/fbcon setup and initialization. This has been added for all drivers in commit 76a39dbfb2d1bc45219839e5a95d4ceaf6ca114f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Jan 20 23:12:54 2013 +0100 drm/fb-helper: don't disable everything in initial_config In this calling context we do not hold any modeset locks since the immediately following call to initialize the fbev emulation grabs all these locks themselves. - There are two exceptions to the above rule: shmob doesn't have fbdev emulation support. I've manually checked the callchain up to the driver load function and no kms locks are held. The right fix therefore is to split this helper into an internal and external version and add the required locking to the function exported to drivers. This remedies locking inconsistencies exposed by me adding locking WARNs as part of the recent kerneldoc abi polishing done in commit 62ff94a5492175759546f8bc61383189d6b49122 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 22:18:47 2014 +0100 drm/crtc-helper: remove LOCKING from kerneldoc and commit 63951385052f7974155fa38f962f0f4e9847f90a Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 15:14:15 2014 +0100 drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c v2: It helps when I actually git add the entire thing. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-20 13:26:34 +00:00
__drm_helper_disable_unused_functions(dev);
} else if (fb_changed) {
set->crtc->x = set->x;
set->crtc->y = set->y;
set->crtc->fb = set->fb;
ret = crtc_funcs->mode_set_base(set->crtc,
set->x, set->y, save_set.fb);
drm: Restore the old_fb upon modeset failure ... or else we may end up disabling the wrong framebuffer, leading to an OOPS, e.g: [ 6033.229012] kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3271! [ 6033.229012] invalid opcode: 0000 [#1] SMP [ 6033.229012] last sysfs file: /sys/devices/virtual/backlight/acpi_video0/uevent [ 6033.229012] Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq mperf snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer thinkpad_acpi ppdev snd r852 sm_common iTCO_wdt uvcvideo i2c_i801 iTCO_vendor_support microcode wmi nand videodev nand_ids nand_ecc snd_page_alloc parport_pc parport mtd soundcore joydev v4l1_compat pcspkr uinput ipv6 sdhci_pci sdhci mmc_core yenta_socket i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan] [ 6033.229012] [ 6033.229012] Pid: 4834, comm: Xorg Not tainted 2.6.37-rc8+ #25 7661BL5/7661BL5 [ 6033.229012] EIP: 0060:[<f86fda5e>] EFLAGS: 00013246 CPU: 0 [ 6033.229012] EIP is at i915_gem_object_unpin+0x23/0x76 [i915] [ 6033.229012] EAX: f68a4000 EBX: f6831f00 ECX: 000600fa EDX: f68a8000 [ 6033.229012] ESI: f68a4014 EDI: f68a42b8 EBP: f2169c44 ESP: f2169c3c [ 6033.229012] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 6033.229012] Process Xorg (pid: 4834, ti=f2168000 task=f21c8000 task.ti=f2168000) [ 6033.229012] Stack: [ 6033.229012] f3a84800 f68a4014 f2169c54 f87045d8 f3a84800 f872d9a8 f2169c68 f7fd8091 [ 6033.229012] f3b952a4 00000000 f68a414c f2169cf0 f7fd9377 00000000 00000000 f7fd98b0 [ 6033.229012] f7fd9f4e 0000000f f7f328a0 00000000 00000000 00000000 f2169ca4 f68a414c [ 6033.229012] Call Trace: [ 6033.229012] [<f87045d8>] ? intel_crtc_disable+0x36/0x41 [i915] [ 6033.229012] [<f7fd8091>] ? drm_helper_disable_unused_functions+0xcd/0xf9 [drm_kms_helper] [ 6033.229012] [<f7fd9377>] ? drm_crtc_helper_set_config+0x62a/0x7f7 [drm_kms_helper] [ 6033.229012] [<c04daa10>] ? __slab_free+0x1b/0xa4 [ 6033.229012] [<f7fd7e62>] ? drm_fb_helper_initial_config+0x466/0x497 [drm_kms_helper] [ 6033.229012] [<f7fd7ea3>] ? drm_fb_helper_restore+0x10/0x2a [drm_kms_helper] [ 6033.229012] [<f86f2577>] ? i915_driver_lastclose+0x2a/0x57 [i915] [ 6033.229012] [<f7f1989f>] ? drm_lastclose+0x45/0x23e [drm] [ 6033.229012] [<f7f1a0b4>] ? drm_release+0x462/0x4d7 [drm] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-08 15:10:41 +00:00
if (ret != 0) {
set->crtc->x = save_set.x;
set->crtc->y = save_set.y;
set->crtc->fb = save_set.fb;
goto fail;
drm: Restore the old_fb upon modeset failure ... or else we may end up disabling the wrong framebuffer, leading to an OOPS, e.g: [ 6033.229012] kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3271! [ 6033.229012] invalid opcode: 0000 [#1] SMP [ 6033.229012] last sysfs file: /sys/devices/virtual/backlight/acpi_video0/uevent [ 6033.229012] Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq mperf snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer thinkpad_acpi ppdev snd r852 sm_common iTCO_wdt uvcvideo i2c_i801 iTCO_vendor_support microcode wmi nand videodev nand_ids nand_ecc snd_page_alloc parport_pc parport mtd soundcore joydev v4l1_compat pcspkr uinput ipv6 sdhci_pci sdhci mmc_core yenta_socket i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan] [ 6033.229012] [ 6033.229012] Pid: 4834, comm: Xorg Not tainted 2.6.37-rc8+ #25 7661BL5/7661BL5 [ 6033.229012] EIP: 0060:[<f86fda5e>] EFLAGS: 00013246 CPU: 0 [ 6033.229012] EIP is at i915_gem_object_unpin+0x23/0x76 [i915] [ 6033.229012] EAX: f68a4000 EBX: f6831f00 ECX: 000600fa EDX: f68a8000 [ 6033.229012] ESI: f68a4014 EDI: f68a42b8 EBP: f2169c44 ESP: f2169c3c [ 6033.229012] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 6033.229012] Process Xorg (pid: 4834, ti=f2168000 task=f21c8000 task.ti=f2168000) [ 6033.229012] Stack: [ 6033.229012] f3a84800 f68a4014 f2169c54 f87045d8 f3a84800 f872d9a8 f2169c68 f7fd8091 [ 6033.229012] f3b952a4 00000000 f68a414c f2169cf0 f7fd9377 00000000 00000000 f7fd98b0 [ 6033.229012] f7fd9f4e 0000000f f7f328a0 00000000 00000000 00000000 f2169ca4 f68a414c [ 6033.229012] Call Trace: [ 6033.229012] [<f87045d8>] ? intel_crtc_disable+0x36/0x41 [i915] [ 6033.229012] [<f7fd8091>] ? drm_helper_disable_unused_functions+0xcd/0xf9 [drm_kms_helper] [ 6033.229012] [<f7fd9377>] ? drm_crtc_helper_set_config+0x62a/0x7f7 [drm_kms_helper] [ 6033.229012] [<c04daa10>] ? __slab_free+0x1b/0xa4 [ 6033.229012] [<f7fd7e62>] ? drm_fb_helper_initial_config+0x466/0x497 [drm_kms_helper] [ 6033.229012] [<f7fd7ea3>] ? drm_fb_helper_restore+0x10/0x2a [drm_kms_helper] [ 6033.229012] [<f86f2577>] ? i915_driver_lastclose+0x2a/0x57 [i915] [ 6033.229012] [<f7f1989f>] ? drm_lastclose+0x45/0x23e [drm] [ 6033.229012] [<f7f1a0b4>] ? drm_release+0x462/0x4d7 [drm] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-08 15:10:41 +00:00
}
}
kfree(save_connectors);
kfree(save_encoders);
return 0;
fail:
/* Restore all previous data. */
count = 0;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
*encoder = save_encoders[count++];
}
count = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
*connector = save_connectors[count++];
}
/* Try to restore the config */
if (mode_changed &&
!drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x,
save_set.y, save_set.fb))
DRM_ERROR("failed to restore config after modeset failure\n");
kfree(save_connectors);
kfree(save_encoders);
return ret;
}
EXPORT_SYMBOL(drm_crtc_helper_set_config);
static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder)
{
int dpms = DRM_MODE_DPMS_OFF;
struct drm_connector *connector;
struct drm_device *dev = encoder->dev;
list_for_each_entry(connector, &dev->mode_config.connector_list, head)
if (connector->encoder == encoder)
if (connector->dpms < dpms)
dpms = connector->dpms;
return dpms;
}
/* Helper which handles bridge ordering around encoder dpms */
static void drm_helper_encoder_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_bridge *bridge = encoder->bridge;
struct drm_encoder_helper_funcs *encoder_funcs;
if (bridge) {
if (mode == DRM_MODE_DPMS_ON)
bridge->funcs->pre_enable(bridge);
else
bridge->funcs->disable(bridge);
}
encoder_funcs = encoder->helper_private;
if (encoder_funcs->dpms)
encoder_funcs->dpms(encoder, mode);
if (bridge) {
if (mode == DRM_MODE_DPMS_ON)
bridge->funcs->enable(bridge);
else
bridge->funcs->post_disable(bridge);
}
}
static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
{
int dpms = DRM_MODE_DPMS_OFF;
struct drm_connector *connector;
struct drm_device *dev = crtc->dev;
list_for_each_entry(connector, &dev->mode_config.connector_list, head)
if (connector->encoder && connector->encoder->crtc == crtc)
if (connector->dpms < dpms)
dpms = connector->dpms;
return dpms;
}
/**
* drm_helper_connector_dpms() - connector dpms helper implementation
* @connector: affected connector
* @mode: DPMS mode
*
* This is the main helper function provided by the crtc helper framework for
* implementing the DPMS connector attribute. It computes the new desired DPMS
* state for all encoders and crtcs in the output mesh and calls the ->dpms()
* callback provided by the driver appropriately.
*/
void drm_helper_connector_dpms(struct drm_connector *connector, int mode)
{
struct drm_encoder *encoder = connector->encoder;
struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
int old_dpms, encoder_dpms = DRM_MODE_DPMS_OFF;
if (mode == connector->dpms)
return;
old_dpms = connector->dpms;
connector->dpms = mode;
if (encoder)
encoder_dpms = drm_helper_choose_encoder_dpms(encoder);
/* from off to on, do crtc then encoder */
if (mode < old_dpms) {
if (crtc) {
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
if (crtc_funcs->dpms)
(*crtc_funcs->dpms) (crtc,
drm_helper_choose_crtc_dpms(crtc));
}
if (encoder)
drm_helper_encoder_dpms(encoder, encoder_dpms);
}
/* from on to off, do encoder then crtc */
if (mode > old_dpms) {
if (encoder)
drm_helper_encoder_dpms(encoder, encoder_dpms);
if (crtc) {
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
if (crtc_funcs->dpms)
(*crtc_funcs->dpms) (crtc,
drm_helper_choose_crtc_dpms(crtc));
}
}
return;
}
EXPORT_SYMBOL(drm_helper_connector_dpms);
/**
* drm_helper_mode_fill_fb_struct - fill out framebuffer metadata
* @fb: drm_framebuffer object to fill out
* @mode_cmd: metadata from the userspace fb creation request
*
* This helper can be used in a drivers fb_create callback to pre-fill the fb's
* metadata fields.
*/
void drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
struct drm_mode_fb_cmd2 *mode_cmd)
{
int i;
fb->width = mode_cmd->width;
fb->height = mode_cmd->height;
for (i = 0; i < 4; i++) {
fb->pitches[i] = mode_cmd->pitches[i];
fb->offsets[i] = mode_cmd->offsets[i];
}
drm_fb_get_bpp_depth(mode_cmd->pixel_format, &fb->depth,
&fb->bits_per_pixel);
fb->pixel_format = mode_cmd->pixel_format;
}
EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
/**
* drm_helper_resume_force_mode - force-restore mode setting configuration
* @dev: drm_device which should be restored
*
* Drivers which use the mode setting helpers can use this function to
* force-restore the mode setting configuration e.g. on resume or when something
* else might have trampled over the hw state (like some overzealous old BIOSen
* tended to do).
*
* This helper doesn't provide a error return value since restoring the old
* config should never fail due to resource allocation issues since the driver
* has successfully set the restored configuration already. Hence this should
* boil down to the equivalent of a few dpms on calls, which also don't provide
* an error code.
*
* Drivers where simply restoring an old configuration again might fail (e.g.
* due to slight differences in allocating shared resources when the
* configuration is restored in a different order than when userspace set it up)
* need to use their own restore logic.
*/
void drm_helper_resume_force_mode(struct drm_device *dev)
{
struct drm_crtc *crtc;
struct drm_encoder *encoder;
struct drm_crtc_helper_funcs *crtc_funcs;
int encoder_dpms;
bool ret;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (!crtc->enabled)
continue;
ret = drm_crtc_helper_set_mode(crtc, &crtc->mode,
crtc->x, crtc->y, crtc->fb);
/* Restoring the old config should never fail! */
if (ret == false)
DRM_ERROR("failed to set mode on crtc %p\n", crtc);
/* Turn off outputs that were already powered off */
if (drm_helper_choose_crtc_dpms(crtc)) {
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
if(encoder->crtc != crtc)
continue;
encoder_dpms = drm_helper_choose_encoder_dpms(
encoder);
drm_helper_encoder_dpms(encoder, encoder_dpms);
}
crtc_funcs = crtc->helper_private;
if (crtc_funcs->dpms)
(*crtc_funcs->dpms) (crtc,
drm_helper_choose_crtc_dpms(crtc));
}
}
/* disable the unused connectors while restoring the modesetting */
drm/crtc-helper: fix locking for drm_helper_disable_unused_functions We have two calling contexts for thise function: - In the crtc helper code itself as part of the ->set_config implementation. In this calling context all modeset locks are already held, as they should. - In drivers not implementing fastboot before the fbdev/fbcon setup and initialization. This has been added for all drivers in commit 76a39dbfb2d1bc45219839e5a95d4ceaf6ca114f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Jan 20 23:12:54 2013 +0100 drm/fb-helper: don't disable everything in initial_config In this calling context we do not hold any modeset locks since the immediately following call to initialize the fbev emulation grabs all these locks themselves. - There are two exceptions to the above rule: shmob doesn't have fbdev emulation support. I've manually checked the callchain up to the driver load function and no kms locks are held. The right fix therefore is to split this helper into an internal and external version and add the required locking to the function exported to drivers. This remedies locking inconsistencies exposed by me adding locking WARNs as part of the recent kerneldoc abi polishing done in commit 62ff94a5492175759546f8bc61383189d6b49122 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 22:18:47 2014 +0100 drm/crtc-helper: remove LOCKING from kerneldoc and commit 63951385052f7974155fa38f962f0f4e9847f90a Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 23 15:14:15 2014 +0100 drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c v2: It helps when I actually git add the entire thing. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-20 13:26:34 +00:00
__drm_helper_disable_unused_functions(dev);
}
EXPORT_SYMBOL(drm_helper_resume_force_mode);
/**
* drm_kms_helper_hotplug_event - fire off KMS hotplug events
* @dev: drm_device whose connector state changed
*
* This function fires off the uevent for userspace and also calls the
* output_poll_changed function, which is most commonly used to inform the fbdev
* emulation code and allow it to update the fbcon output configuration.
*
* Drivers should call this from their hotplug handling code when a change is
* detected. Note that this function does not do any output detection of its
* own, like drm_helper_hpd_irq_event() does - this is assumed to be done by the
* driver already.
*
* This function must be called from process context with no mode
* setting locks held.
*/
void drm_kms_helper_hotplug_event(struct drm_device *dev)
{
/* send a uevent + call fbdev */
drm_sysfs_hotplug_event(dev);
if (dev->mode_config.funcs->output_poll_changed)
dev->mode_config.funcs->output_poll_changed(dev);
}
EXPORT_SYMBOL(drm_kms_helper_hotplug_event);
#define DRM_OUTPUT_POLL_PERIOD (10*HZ)
static void output_poll_execute(struct work_struct *work)
{
struct delayed_work *delayed_work = to_delayed_work(work);
struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work);
struct drm_connector *connector;
enum drm_connector_status old_status;
bool repoll = false, changed = false;
if (!drm_kms_helper_poll)
return;
mutex_lock(&dev->mode_config.mutex);
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
/* Ignore forced connectors. */
if (connector->force)
continue;
/* Ignore HPD capable connectors and connectors where we don't
* want any hotplug detection at all for polling. */
if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD)
continue;
repoll = true;
old_status = connector->status;
/* if we are connected and don't want to poll for disconnect
skip it */
if (old_status == connector_status_connected &&
!(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT))
continue;
connector->status = connector->funcs->detect(connector, false);
if (old_status != connector->status) {
const char *old, *new;
old = drm_get_connector_status_name(old_status);
new = drm_get_connector_status_name(connector->status);
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] "
"status updated from %s to %s\n",
connector->base.id,
drm_get_connector_name(connector),
old, new);
changed = true;
}
}
mutex_unlock(&dev->mode_config.mutex);
if (changed)
drm_kms_helper_hotplug_event(dev);
if (repoll)
schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD);
}
/**
* drm_kms_helper_poll_disable - disable output polling
* @dev: drm_device
*
* This function disables the output polling work.
*
* Drivers can call this helper from their device suspend implementation. It is
* not an error to call this even when output polling isn't enabled or arlready
* disabled.
*/
void drm_kms_helper_poll_disable(struct drm_device *dev)
{
if (!dev->mode_config.poll_enabled)
return;
cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
}
EXPORT_SYMBOL(drm_kms_helper_poll_disable);
/**
* drm_kms_helper_poll_enable - re-enable output polling.
* @dev: drm_device
*
* This function re-enables the output polling work.
*
* Drivers can call this helper from their device resume implementation. It is
* an error to call this when the output polling support has not yet been set
* up.
*/
void drm_kms_helper_poll_enable(struct drm_device *dev)
{
bool poll = false;
struct drm_connector *connector;
if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
return;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
DRM_CONNECTOR_POLL_DISCONNECT))
poll = true;
}
if (poll)
schedule_delayed_work(&dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD);
}
EXPORT_SYMBOL(drm_kms_helper_poll_enable);
/**
* drm_kms_helper_poll_init - initialize and enable output polling
* @dev: drm_device
*
* This function intializes and then also enables output polling support for
* @dev. Drivers which do not have reliable hotplug support in hardware can use
* this helper infrastructure to regularly poll such connectors for changes in
* their connection state.
*
* Drivers can control which connectors are polled by setting the
* DRM_CONNECTOR_POLL_CONNECT and DRM_CONNECTOR_POLL_DISCONNECT flags. On
* connectors where probing live outputs can result in visual distortion drivers
* should not set the DRM_CONNECTOR_POLL_DISCONNECT flag to avoid this.
* Connectors which have no flag or only DRM_CONNECTOR_POLL_HPD set are
* completely ignored by the polling logic.
*
* Note that a connector can be both polled and probed from the hotplug handler,
* in case the hotplug interrupt is known to be unreliable.
*/
void drm_kms_helper_poll_init(struct drm_device *dev)
{
INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute);
dev->mode_config.poll_enabled = true;
drm_kms_helper_poll_enable(dev);
}
EXPORT_SYMBOL(drm_kms_helper_poll_init);
/**
* drm_kms_helper_poll_fini - disable output polling and clean it up
* @dev: drm_device
*/
void drm_kms_helper_poll_fini(struct drm_device *dev)
{
drm_kms_helper_poll_disable(dev);
}
EXPORT_SYMBOL(drm_kms_helper_poll_fini);
/**
* drm_helper_hpd_irq_event - hotplug processing
* @dev: drm_device
*
* Drivers can use this helper function to run a detect cycle on all connectors
* which have the DRM_CONNECTOR_POLL_HPD flag set in their &polled member. All
* other connectors are ignored, which is useful to avoid reprobing fixed
* panels.
*
* This helper function is useful for drivers which can't or don't track hotplug
* interrupts for each connector.
*
* Drivers which support hotplug interrupts for each connector individually and
* which have a more fine-grained detect logic should bypass this code and
* directly call drm_kms_helper_hotplug_event() in case the connector state
* changed.
*
* This function must be called from process context with no mode
* setting locks held.
*
* Note that a connector can be both polled and probed from the hotplug handler,
* in case the hotplug interrupt is known to be unreliable.
*/
bool drm_helper_hpd_irq_event(struct drm_device *dev)
{
struct drm_connector *connector;
enum drm_connector_status old_status;
bool changed = false;
if (!dev->mode_config.poll_enabled)
return false;
mutex_lock(&dev->mode_config.mutex);
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
/* Only handle HPD capable connectors. */
if (!(connector->polled & DRM_CONNECTOR_POLL_HPD))
continue;
old_status = connector->status;
connector->status = connector->funcs->detect(connector, false);
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
connector->base.id,
drm_get_connector_name(connector),
drm_get_connector_status_name(old_status),
drm_get_connector_status_name(connector->status));
if (old_status != connector->status)
changed = true;
}
mutex_unlock(&dev->mode_config.mutex);
if (changed)
drm_kms_helper_hotplug_event(dev);
return changed;
}
EXPORT_SYMBOL(drm_helper_hpd_irq_event);