linux/net/bluetooth/l2cap_core.c

7657 lines
178 KiB
C
Raw Normal View History

/*
BlueZ - Bluetooth protocol stack for Linux
Copyright (C) 2000-2001 Qualcomm Incorporated
Copyright (C) 2009-2010 Gustavo F. Padovan <gustavo@padovan.org>
Copyright (C) 2010 Google Inc.
Copyright (C) 2011 ProFUSION Embedded Systems
Copyright (c) 2012 Code Aurora Forum. All rights reserved.
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
SOFTWARE IS DISCLAIMED.
*/
/* Bluetooth L2CAP core. */
#include <linux/module.h>
#include <linux/debugfs.h>
#include <linux/crc16.h>
Bluetooth: split sk_filter in l2cap_sock_recv_cb During an audit for sk_filter(), we found that rx_busy_skb handling in l2cap_sock_recv_cb() and l2cap_sock_recvmsg() looks not quite as intended. The assumption from commit e328140fdacb ("Bluetooth: Use event-driven approach for handling ERTM receive buffer") is that errors returned from sock_queue_rcv_skb() are due to receive buffer shortage. However, nothing should prevent doing a setsockopt() with SO_ATTACH_FILTER on the socket, that could drop some of the incoming skbs when handled in sock_queue_rcv_skb(). In that case sock_queue_rcv_skb() will return with -EPERM, propagated from sk_filter() and if in L2CAP_MODE_ERTM mode, wrong assumption was that we failed due to receive buffer being full. From that point onwards, due to the to-be-dropped skb being held in rx_busy_skb, we cannot make any forward progress as rx_busy_skb is never cleared from l2cap_sock_recvmsg(), due to the filter drop verdict over and over coming from sk_filter(). Meanwhile, in l2cap_sock_recv_cb() all new incoming skbs are being dropped due to rx_busy_skb being occupied. Instead, just use __sock_queue_rcv_skb() where an error really tells that there's a receive buffer issue. Split the sk_filter() and enable it for non-segmented modes at queuing time since at this point in time the skb has already been through the ERTM state machine and it has been acked, so dropping is not allowed. Instead, for ERTM and streaming mode, call sk_filter() in l2cap_data_rcv() so the packet can be dropped before the state machine sees it. Fixes: e328140fdacb ("Bluetooth: Use event-driven approach for handling ERTM receive buffer") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-27 18:40:14 +00:00
#include <linux/filter.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/l2cap.h>
#include "smp.h"
#include "a2mp.h"
#include "amp.h"
#define LE_FLOWCTL_MAX_CREDITS 65535
bool disable_ertm;
static u32 l2cap_feat_mask = L2CAP_FEAT_FIXED_CHAN | L2CAP_FEAT_UCD;
static LIST_HEAD(chan_list);
static DEFINE_RWLOCK(chan_list_lock);
static u16 le_max_credits = L2CAP_LE_MAX_CREDITS;
static u16 le_default_mps = L2CAP_LE_DEFAULT_MPS;
static struct sk_buff *l2cap_build_cmd(struct l2cap_conn *conn,
u8 code, u8 ident, u16 dlen, void *data);
static void l2cap_send_cmd(struct l2cap_conn *conn, u8 ident, u8 code, u16 len,
void *data);
static int l2cap_build_conf_req(struct l2cap_chan *chan, void *data);
static void l2cap_send_disconn_req(struct l2cap_chan *chan, int err);
static void l2cap_tx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
struct sk_buff_head *skbs, u8 event);
static inline u8 bdaddr_type(u8 link_type, u8 bdaddr_type)
{
if (link_type == LE_LINK) {
if (bdaddr_type == ADDR_LE_DEV_PUBLIC)
return BDADDR_LE_PUBLIC;
else
return BDADDR_LE_RANDOM;
}
return BDADDR_BREDR;
}
static inline u8 bdaddr_src_type(struct hci_conn *hcon)
{
return bdaddr_type(hcon->type, hcon->src_type);
}
static inline u8 bdaddr_dst_type(struct hci_conn *hcon)
{
return bdaddr_type(hcon->type, hcon->dst_type);
}
/* ---- L2CAP channels ---- */
static struct l2cap_chan *__l2cap_get_chan_by_dcid(struct l2cap_conn *conn,
u16 cid)
{
struct l2cap_chan *c;
list_for_each_entry(c, &conn->chan_l, list) {
if (c->dcid == cid)
return c;
}
return NULL;
}
static struct l2cap_chan *__l2cap_get_chan_by_scid(struct l2cap_conn *conn,
u16 cid)
{
struct l2cap_chan *c;
list_for_each_entry(c, &conn->chan_l, list) {
if (c->scid == cid)
return c;
}
return NULL;
}
/* Find channel with given SCID.
* Returns locked channel. */
static struct l2cap_chan *l2cap_get_chan_by_scid(struct l2cap_conn *conn,
u16 cid)
{
struct l2cap_chan *c;
mutex_lock(&conn->chan_lock);
c = __l2cap_get_chan_by_scid(conn, cid);
if (c)
l2cap_chan_lock(c);
mutex_unlock(&conn->chan_lock);
return c;
}
/* Find channel with given DCID.
* Returns locked channel.
*/
static struct l2cap_chan *l2cap_get_chan_by_dcid(struct l2cap_conn *conn,
u16 cid)
{
struct l2cap_chan *c;
mutex_lock(&conn->chan_lock);
c = __l2cap_get_chan_by_dcid(conn, cid);
if (c)
l2cap_chan_lock(c);
mutex_unlock(&conn->chan_lock);
return c;
}
static struct l2cap_chan *__l2cap_get_chan_by_ident(struct l2cap_conn *conn,
u8 ident)
{
struct l2cap_chan *c;
list_for_each_entry(c, &conn->chan_l, list) {
if (c->ident == ident)
return c;
}
return NULL;
}
static struct l2cap_chan *l2cap_get_chan_by_ident(struct l2cap_conn *conn,
u8 ident)
{
struct l2cap_chan *c;
mutex_lock(&conn->chan_lock);
c = __l2cap_get_chan_by_ident(conn, ident);
if (c)
l2cap_chan_lock(c);
mutex_unlock(&conn->chan_lock);
return c;
}
static struct l2cap_chan *__l2cap_global_chan_by_addr(__le16 psm, bdaddr_t *src)
{
struct l2cap_chan *c;
list_for_each_entry(c, &chan_list, global_l) {
if (c->sport == psm && !bacmp(&c->src, src))
return c;
}
return NULL;
}
int l2cap_add_psm(struct l2cap_chan *chan, bdaddr_t *src, __le16 psm)
{
int err;
write_lock(&chan_list_lock);
if (psm && __l2cap_global_chan_by_addr(psm, src)) {
err = -EADDRINUSE;
goto done;
}
if (psm) {
chan->psm = psm;
chan->sport = psm;
err = 0;
} else {
u16 p, start, end, incr;
if (chan->src_type == BDADDR_BREDR) {
start = L2CAP_PSM_DYN_START;
end = L2CAP_PSM_AUTO_END;
incr = 2;
} else {
start = L2CAP_PSM_LE_DYN_START;
end = L2CAP_PSM_LE_DYN_END;
incr = 1;
}
err = -EINVAL;
for (p = start; p <= end; p += incr)
if (!__l2cap_global_chan_by_addr(cpu_to_le16(p), src)) {
chan->psm = cpu_to_le16(p);
chan->sport = cpu_to_le16(p);
err = 0;
break;
}
}
done:
write_unlock(&chan_list_lock);
return err;
}
EXPORT_SYMBOL_GPL(l2cap_add_psm);
int l2cap_add_scid(struct l2cap_chan *chan, __u16 scid)
{
write_lock(&chan_list_lock);
/* Override the defaults (which are for conn-oriented) */
chan->omtu = L2CAP_DEFAULT_MTU;
chan->chan_type = L2CAP_CHAN_FIXED;
chan->scid = scid;
write_unlock(&chan_list_lock);
return 0;
}
static u16 l2cap_alloc_cid(struct l2cap_conn *conn)
{
u16 cid, dyn_end;
if (conn->hcon->type == LE_LINK)
dyn_end = L2CAP_CID_LE_DYN_END;
else
dyn_end = L2CAP_CID_DYN_END;
for (cid = L2CAP_CID_DYN_START; cid <= dyn_end; cid++) {
if (!__l2cap_get_chan_by_scid(conn, cid))
return cid;
}
return 0;
}
static void l2cap_state_change(struct l2cap_chan *chan, int state)
{
BT_DBG("chan %p %s -> %s", chan, state_to_string(chan->state),
state_to_string(state));
chan->state = state;
chan->ops->state_change(chan, state, 0);
}
static inline void l2cap_state_change_and_error(struct l2cap_chan *chan,
int state, int err)
{
chan->state = state;
chan->ops->state_change(chan, chan->state, err);
}
static inline void l2cap_chan_set_err(struct l2cap_chan *chan, int err)
{
chan->ops->state_change(chan, chan->state, err);
}
static void __set_retrans_timer(struct l2cap_chan *chan)
{
if (!delayed_work_pending(&chan->monitor_timer) &&
chan->retrans_timeout) {
l2cap_set_timer(chan, &chan->retrans_timer,
msecs_to_jiffies(chan->retrans_timeout));
}
}
static void __set_monitor_timer(struct l2cap_chan *chan)
{
__clear_retrans_timer(chan);
if (chan->monitor_timeout) {
l2cap_set_timer(chan, &chan->monitor_timer,
msecs_to_jiffies(chan->monitor_timeout));
}
}
static struct sk_buff *l2cap_ertm_seq_in_queue(struct sk_buff_head *head,
u16 seq)
{
struct sk_buff *skb;
skb_queue_walk(head, skb) {
if (bt_cb(skb)->l2cap.txseq == seq)
return skb;
}
return NULL;
}
/* ---- L2CAP sequence number lists ---- */
/* For ERTM, ordered lists of sequence numbers must be tracked for
* SREJ requests that are received and for frames that are to be
* retransmitted. These seq_list functions implement a singly-linked
* list in an array, where membership in the list can also be checked
* in constant time. Items can also be added to the tail of the list
* and removed from the head in constant time, without further memory
* allocs or frees.
*/
static int l2cap_seq_list_init(struct l2cap_seq_list *seq_list, u16 size)
{
size_t alloc_size, i;
/* Allocated size is a power of 2 to map sequence numbers
* (which may be up to 14 bits) in to a smaller array that is
* sized for the negotiated ERTM transmit windows.
*/
alloc_size = roundup_pow_of_two(size);
seq_list->list = kmalloc(sizeof(u16) * alloc_size, GFP_KERNEL);
if (!seq_list->list)
return -ENOMEM;
seq_list->mask = alloc_size - 1;
seq_list->head = L2CAP_SEQ_LIST_CLEAR;
seq_list->tail = L2CAP_SEQ_LIST_CLEAR;
for (i = 0; i < alloc_size; i++)
seq_list->list[i] = L2CAP_SEQ_LIST_CLEAR;
return 0;
}
static inline void l2cap_seq_list_free(struct l2cap_seq_list *seq_list)
{
kfree(seq_list->list);
}
static inline bool l2cap_seq_list_contains(struct l2cap_seq_list *seq_list,
u16 seq)
{
/* Constant-time check for list membership */
return seq_list->list[seq & seq_list->mask] != L2CAP_SEQ_LIST_CLEAR;
}
static inline u16 l2cap_seq_list_pop(struct l2cap_seq_list *seq_list)
{
u16 seq = seq_list->head;
u16 mask = seq_list->mask;
seq_list->head = seq_list->list[seq & mask];
seq_list->list[seq & mask] = L2CAP_SEQ_LIST_CLEAR;
if (seq_list->head == L2CAP_SEQ_LIST_TAIL) {
seq_list->head = L2CAP_SEQ_LIST_CLEAR;
seq_list->tail = L2CAP_SEQ_LIST_CLEAR;
}
return seq;
}
static void l2cap_seq_list_clear(struct l2cap_seq_list *seq_list)
{
u16 i;
if (seq_list->head == L2CAP_SEQ_LIST_CLEAR)
return;
for (i = 0; i <= seq_list->mask; i++)
seq_list->list[i] = L2CAP_SEQ_LIST_CLEAR;
seq_list->head = L2CAP_SEQ_LIST_CLEAR;
seq_list->tail = L2CAP_SEQ_LIST_CLEAR;
}
static void l2cap_seq_list_append(struct l2cap_seq_list *seq_list, u16 seq)
{
u16 mask = seq_list->mask;
/* All appends happen in constant time */
if (seq_list->list[seq & mask] != L2CAP_SEQ_LIST_CLEAR)
return;
if (seq_list->tail == L2CAP_SEQ_LIST_CLEAR)
seq_list->head = seq;
else
seq_list->list[seq_list->tail & mask] = seq;
seq_list->tail = seq;
seq_list->list[seq & mask] = L2CAP_SEQ_LIST_TAIL;
}
static void l2cap_chan_timeout(struct work_struct *work)
{
struct l2cap_chan *chan = container_of(work, struct l2cap_chan,
chan_timer.work);
struct l2cap_conn *conn = chan->conn;
int reason;
BT_DBG("chan %p state %s", chan, state_to_string(chan->state));
mutex_lock(&conn->chan_lock);
l2cap_chan_lock(chan);
if (chan->state == BT_CONNECTED || chan->state == BT_CONFIG)
reason = ECONNREFUSED;
else if (chan->state == BT_CONNECT &&
chan->sec_level != BT_SECURITY_SDP)
reason = ECONNREFUSED;
else
reason = ETIMEDOUT;
l2cap_chan_close(chan, reason);
l2cap_chan_unlock(chan);
chan->ops->close(chan);
mutex_unlock(&conn->chan_lock);
Bluetooth: Fix deadlocks with sock lock and L2CAP timers locks When cancelling a delayed work (timer) in L2CAP we can not sleep holding the sock mutex otherwise we might deadlock with an L2CAP timer handler. This is possible because RX/TX and L2CAP timers run in different workqueues. The scenario below illustrates the problem. Thus we are now avoiding to sleep on the timers locks. ====================================================== [ INFO: possible circular locking dependency detected ] 3.1.0-05270-ga978dc7-dirty #239 ------------------------------------------------------- kworker/1:1/873 is trying to acquire lock: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] but task is already holding lock: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((&(&chan->chan_timer)->work)){+.+...}: [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff81052a6f>] wait_on_work+0x4f/0x160 [<ffffffff81052ca3>] __cancel_work_timer+0x73/0x80 [<ffffffff81052cbd>] cancel_delayed_work_sync+0xd/0x10 [<ffffffffa002f2ed>] l2cap_chan_connect+0x22d/0x470 [bluetooth] [<ffffffffa002fb51>] l2cap_sock_connect+0xb1/0x140 [bluetooth] [<ffffffff8130811b>] kernel_connect+0xb/0x10 [<ffffffffa00cf98a>] rfcomm_session_create+0x12a/0x1c0 [rfcomm] [<ffffffffa00cfbe7>] __rfcomm_dlc_open+0x1c7/0x240 [rfcomm] [<ffffffffa00d07c2>] rfcomm_dlc_open+0x42/0x70 [rfcomm] [<ffffffffa00d3b03>] rfcomm_sock_connect+0x103/0x150 [rfcomm] [<ffffffff8130bd7e>] sys_connect+0xae/0xc0 [<ffffffff813368d2>] compat_sys_socketcall+0xb2/0x220 [<ffffffff813b2089>] sysenter_dispatch+0x7/0x30 -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}: [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); *** DEADLOCK *** 2 locks held by kworker/1:1/873: #0: (events){.+.+.+}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 #1: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 stack backtrace: Pid: 873, comm: kworker/1:1 Not tainted 3.1.0-05270-ga978dc7-dirty #239 Call Trace: [<ffffffff813a0f6e>] print_circular_bug+0xd2/0xe3 [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ea30>] ? lock_release_nested+0x100/0x110 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ce70>] ? l2cap_security_cfm+0x4e0/0x4e0 [bluetooth] [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81052610>] ? manage_workers+0x110/0x110 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 [<ffffffff813af69d>] ? retint_restore_args+0xe/0xe [<ffffffff81057b20>] ? __init_kthread_worker+0x70/0x70 [<ffffffff813b1ef0>] ? gs_change+0xb/0xb Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-21 22:02:36 +00:00
l2cap_chan_put(chan);
}
struct l2cap_chan *l2cap_chan_create(void)
{
struct l2cap_chan *chan;
chan = kzalloc(sizeof(*chan), GFP_ATOMIC);
if (!chan)
return NULL;
mutex_init(&chan->lock);
/* Set default lock nesting level */
atomic_set(&chan->nesting, L2CAP_NESTING_NORMAL);
write_lock(&chan_list_lock);
list_add(&chan->global_l, &chan_list);
write_unlock(&chan_list_lock);
INIT_DELAYED_WORK(&chan->chan_timer, l2cap_chan_timeout);
chan->state = BT_OPEN;
kref_init(&chan->kref);
/* This flag is cleared in l2cap_chan_ready() */
set_bit(CONF_NOT_COMPLETE, &chan->conf_state);
BT_DBG("chan %p", chan);
return chan;
}
EXPORT_SYMBOL_GPL(l2cap_chan_create);
static void l2cap_chan_destroy(struct kref *kref)
{
struct l2cap_chan *chan = container_of(kref, struct l2cap_chan, kref);
BT_DBG("chan %p", chan);
write_lock(&chan_list_lock);
list_del(&chan->global_l);
write_unlock(&chan_list_lock);
kfree(chan);
}
void l2cap_chan_hold(struct l2cap_chan *c)
{
BT_DBG("chan %p orig refcnt %d", c, kref_read(&c->kref));
kref_get(&c->kref);
}
void l2cap_chan_put(struct l2cap_chan *c)
{
BT_DBG("chan %p orig refcnt %d", c, kref_read(&c->kref));
kref_put(&c->kref, l2cap_chan_destroy);
}
EXPORT_SYMBOL_GPL(l2cap_chan_put);
void l2cap_chan_set_defaults(struct l2cap_chan *chan)
{
chan->fcs = L2CAP_FCS_CRC16;
chan->max_tx = L2CAP_DEFAULT_MAX_TX;
chan->tx_win = L2CAP_DEFAULT_TX_WINDOW;
chan->tx_win_max = L2CAP_DEFAULT_TX_WINDOW;
chan->remote_max_tx = chan->max_tx;
chan->remote_tx_win = chan->tx_win;
chan->ack_win = L2CAP_DEFAULT_TX_WINDOW;
chan->sec_level = BT_SECURITY_LOW;
chan->flush_to = L2CAP_DEFAULT_FLUSH_TO;
chan->retrans_timeout = L2CAP_DEFAULT_RETRANS_TO;
chan->monitor_timeout = L2CAP_DEFAULT_MONITOR_TO;
chan->conf_state = 0;
set_bit(FLAG_FORCE_ACTIVE, &chan->flags);
}
EXPORT_SYMBOL_GPL(l2cap_chan_set_defaults);
static void l2cap_le_flowctl_init(struct l2cap_chan *chan)
{
chan->sdu = NULL;
chan->sdu_last_frag = NULL;
chan->sdu_len = 0;
chan->tx_credits = 0;
chan->rx_credits = le_max_credits;
chan->mps = min_t(u16, chan->imtu, le_default_mps);
skb_queue_head_init(&chan->tx_q);
}
void __l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan)
{
BT_DBG("conn %p, psm 0x%2.2x, dcid 0x%4.4x", conn,
__le16_to_cpu(chan->psm), chan->dcid);
conn->disc_reason = HCI_ERROR_REMOTE_USER_TERM;
Bluetooth: Ask upper layers for HCI disconnect reason Some of the qualification tests demand that in case of failures in L2CAP the HCI disconnect should indicate a reason why L2CAP fails. This is a bluntly layer violation since multiple L2CAP connections could be using the same ACL and thus forcing a disconnect reason is not a good idea. To comply with the Bluetooth test specification, the disconnect reason is now stored in the L2CAP connection structure and every time a new L2CAP channel is added it will set back to its default. So only in the case where the L2CAP channel with the disconnect reason is really the last one, it will propagated to the HCI layer. The HCI layer has been extended with a disconnect indication that allows it to ask upper layers for a disconnect reason. The upper layer must not support this callback and in that case it will nicely default to the existing behavior. If an upper layer like L2CAP can provide a disconnect reason that one will be used to disconnect the ACL or SCO link. No modification to the ACL disconnect timeout have been made. So in case of Linux to Linux connection the initiator will disconnect the ACL link before the acceptor side can signal the specific disconnect reason. That is perfectly fine since Linux doesn't make use of this value anyway. The L2CAP layer has a perfect valid error code for rejecting connection due to a security violation. It is unclear why the Bluetooth specification insists on having specific HCI disconnect reason. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-12 13:02:50 +00:00
chan->conn = conn;
switch (chan->chan_type) {
case L2CAP_CHAN_CONN_ORIENTED:
/* Alloc CID for connection-oriented socket */
chan->scid = l2cap_alloc_cid(conn);
if (conn->hcon->type == ACL_LINK)
chan->omtu = L2CAP_DEFAULT_MTU;
break;
case L2CAP_CHAN_CONN_LESS:
/* Connectionless socket */
chan->scid = L2CAP_CID_CONN_LESS;
chan->dcid = L2CAP_CID_CONN_LESS;
chan->omtu = L2CAP_DEFAULT_MTU;
break;
case L2CAP_CHAN_FIXED:
/* Caller will set CID and CID specific MTU values */
break;
default:
/* Raw socket can send/recv signalling messages only */
chan->scid = L2CAP_CID_SIGNALING;
chan->dcid = L2CAP_CID_SIGNALING;
chan->omtu = L2CAP_DEFAULT_MTU;
}
chan->local_id = L2CAP_BESTEFFORT_ID;
chan->local_stype = L2CAP_SERV_BESTEFFORT;
chan->local_msdu = L2CAP_DEFAULT_MAX_SDU_SIZE;
chan->local_sdu_itime = L2CAP_DEFAULT_SDU_ITIME;
chan->local_acc_lat = L2CAP_DEFAULT_ACC_LAT;
chan->local_flush_to = L2CAP_EFS_DEFAULT_FLUSH_TO;
Bluetooth: Fix deadlocks with sock lock and L2CAP timers locks When cancelling a delayed work (timer) in L2CAP we can not sleep holding the sock mutex otherwise we might deadlock with an L2CAP timer handler. This is possible because RX/TX and L2CAP timers run in different workqueues. The scenario below illustrates the problem. Thus we are now avoiding to sleep on the timers locks. ====================================================== [ INFO: possible circular locking dependency detected ] 3.1.0-05270-ga978dc7-dirty #239 ------------------------------------------------------- kworker/1:1/873 is trying to acquire lock: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] but task is already holding lock: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((&(&chan->chan_timer)->work)){+.+...}: [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff81052a6f>] wait_on_work+0x4f/0x160 [<ffffffff81052ca3>] __cancel_work_timer+0x73/0x80 [<ffffffff81052cbd>] cancel_delayed_work_sync+0xd/0x10 [<ffffffffa002f2ed>] l2cap_chan_connect+0x22d/0x470 [bluetooth] [<ffffffffa002fb51>] l2cap_sock_connect+0xb1/0x140 [bluetooth] [<ffffffff8130811b>] kernel_connect+0xb/0x10 [<ffffffffa00cf98a>] rfcomm_session_create+0x12a/0x1c0 [rfcomm] [<ffffffffa00cfbe7>] __rfcomm_dlc_open+0x1c7/0x240 [rfcomm] [<ffffffffa00d07c2>] rfcomm_dlc_open+0x42/0x70 [rfcomm] [<ffffffffa00d3b03>] rfcomm_sock_connect+0x103/0x150 [rfcomm] [<ffffffff8130bd7e>] sys_connect+0xae/0xc0 [<ffffffff813368d2>] compat_sys_socketcall+0xb2/0x220 [<ffffffff813b2089>] sysenter_dispatch+0x7/0x30 -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}: [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); *** DEADLOCK *** 2 locks held by kworker/1:1/873: #0: (events){.+.+.+}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 #1: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 stack backtrace: Pid: 873, comm: kworker/1:1 Not tainted 3.1.0-05270-ga978dc7-dirty #239 Call Trace: [<ffffffff813a0f6e>] print_circular_bug+0xd2/0xe3 [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ea30>] ? lock_release_nested+0x100/0x110 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ce70>] ? l2cap_security_cfm+0x4e0/0x4e0 [bluetooth] [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81052610>] ? manage_workers+0x110/0x110 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 [<ffffffff813af69d>] ? retint_restore_args+0xe/0xe [<ffffffff81057b20>] ? __init_kthread_worker+0x70/0x70 [<ffffffff813b1ef0>] ? gs_change+0xb/0xb Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-21 22:02:36 +00:00
l2cap_chan_hold(chan);
/* Only keep a reference for fixed channels if they requested it */
if (chan->chan_type != L2CAP_CHAN_FIXED ||
test_bit(FLAG_HOLD_HCI_CONN, &chan->flags))
hci_conn_hold(conn->hcon);
list_add(&chan->list, &conn->chan_l);
}
void l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan)
{
mutex_lock(&conn->chan_lock);
__l2cap_chan_add(conn, chan);
mutex_unlock(&conn->chan_lock);
}
void l2cap_chan_del(struct l2cap_chan *chan, int err)
{
struct l2cap_conn *conn = chan->conn;
__clear_chan_timer(chan);
BT_DBG("chan %p, conn %p, err %d, state %s", chan, conn, err,
state_to_string(chan->state));
chan->ops->teardown(chan, err);
if (conn) {
struct amp_mgr *mgr = conn->hcon->amp_mgr;
/* Delete from channel list */
list_del(&chan->list);
Bluetooth: Fix deadlocks with sock lock and L2CAP timers locks When cancelling a delayed work (timer) in L2CAP we can not sleep holding the sock mutex otherwise we might deadlock with an L2CAP timer handler. This is possible because RX/TX and L2CAP timers run in different workqueues. The scenario below illustrates the problem. Thus we are now avoiding to sleep on the timers locks. ====================================================== [ INFO: possible circular locking dependency detected ] 3.1.0-05270-ga978dc7-dirty #239 ------------------------------------------------------- kworker/1:1/873 is trying to acquire lock: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] but task is already holding lock: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((&(&chan->chan_timer)->work)){+.+...}: [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff81052a6f>] wait_on_work+0x4f/0x160 [<ffffffff81052ca3>] __cancel_work_timer+0x73/0x80 [<ffffffff81052cbd>] cancel_delayed_work_sync+0xd/0x10 [<ffffffffa002f2ed>] l2cap_chan_connect+0x22d/0x470 [bluetooth] [<ffffffffa002fb51>] l2cap_sock_connect+0xb1/0x140 [bluetooth] [<ffffffff8130811b>] kernel_connect+0xb/0x10 [<ffffffffa00cf98a>] rfcomm_session_create+0x12a/0x1c0 [rfcomm] [<ffffffffa00cfbe7>] __rfcomm_dlc_open+0x1c7/0x240 [rfcomm] [<ffffffffa00d07c2>] rfcomm_dlc_open+0x42/0x70 [rfcomm] [<ffffffffa00d3b03>] rfcomm_sock_connect+0x103/0x150 [rfcomm] [<ffffffff8130bd7e>] sys_connect+0xae/0xc0 [<ffffffff813368d2>] compat_sys_socketcall+0xb2/0x220 [<ffffffff813b2089>] sysenter_dispatch+0x7/0x30 -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}: [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); *** DEADLOCK *** 2 locks held by kworker/1:1/873: #0: (events){.+.+.+}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 #1: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 stack backtrace: Pid: 873, comm: kworker/1:1 Not tainted 3.1.0-05270-ga978dc7-dirty #239 Call Trace: [<ffffffff813a0f6e>] print_circular_bug+0xd2/0xe3 [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ea30>] ? lock_release_nested+0x100/0x110 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ce70>] ? l2cap_security_cfm+0x4e0/0x4e0 [bluetooth] [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81052610>] ? manage_workers+0x110/0x110 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 [<ffffffff813af69d>] ? retint_restore_args+0xe/0xe [<ffffffff81057b20>] ? __init_kthread_worker+0x70/0x70 [<ffffffff813b1ef0>] ? gs_change+0xb/0xb Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-21 22:02:36 +00:00
l2cap_chan_put(chan);
chan->conn = NULL;
/* Reference was only held for non-fixed channels or
* fixed channels that explicitly requested it using the
* FLAG_HOLD_HCI_CONN flag.
*/
if (chan->chan_type != L2CAP_CHAN_FIXED ||
test_bit(FLAG_HOLD_HCI_CONN, &chan->flags))
hci_conn_drop(conn->hcon);
if (mgr && mgr->bredr_chan == chan)
mgr->bredr_chan = NULL;
}
if (chan->hs_hchan) {
struct hci_chan *hs_hchan = chan->hs_hchan;
BT_DBG("chan %p disconnect hs_hchan %p", chan, hs_hchan);
amp_disconnect_logical_link(hs_hchan);
}
if (test_bit(CONF_NOT_COMPLETE, &chan->conf_state))
return;
switch(chan->mode) {
case L2CAP_MODE_BASIC:
break;
case L2CAP_MODE_LE_FLOWCTL:
skb_queue_purge(&chan->tx_q);
break;
case L2CAP_MODE_ERTM:
__clear_retrans_timer(chan);
__clear_monitor_timer(chan);
__clear_ack_timer(chan);
skb_queue_purge(&chan->srej_q);
l2cap_seq_list_free(&chan->srej_list);
l2cap_seq_list_free(&chan->retrans_list);
/* fall through */
case L2CAP_MODE_STREAMING:
skb_queue_purge(&chan->tx_q);
break;
}
return;
}
EXPORT_SYMBOL_GPL(l2cap_chan_del);
static void l2cap_conn_update_id_addr(struct work_struct *work)
{
struct l2cap_conn *conn = container_of(work, struct l2cap_conn,
id_addr_update_work);
struct hci_conn *hcon = conn->hcon;
struct l2cap_chan *chan;
mutex_lock(&conn->chan_lock);
list_for_each_entry(chan, &conn->chan_l, list) {
l2cap_chan_lock(chan);
bacpy(&chan->dst, &hcon->dst);
chan->dst_type = bdaddr_dst_type(hcon);
l2cap_chan_unlock(chan);
}
mutex_unlock(&conn->chan_lock);
}
static void l2cap_chan_le_connect_reject(struct l2cap_chan *chan)
{
struct l2cap_conn *conn = chan->conn;
struct l2cap_le_conn_rsp rsp;
u16 result;
if (test_bit(FLAG_DEFER_SETUP, &chan->flags))
result = L2CAP_CR_AUTHORIZATION;
else
result = L2CAP_CR_BAD_PSM;
l2cap_state_change(chan, BT_DISCONN);
rsp.dcid = cpu_to_le16(chan->scid);
rsp.mtu = cpu_to_le16(chan->imtu);
rsp.mps = cpu_to_le16(chan->mps);
rsp.credits = cpu_to_le16(chan->rx_credits);
rsp.result = cpu_to_le16(result);
l2cap_send_cmd(conn, chan->ident, L2CAP_LE_CONN_RSP, sizeof(rsp),
&rsp);
}
static void l2cap_chan_connect_reject(struct l2cap_chan *chan)
{
struct l2cap_conn *conn = chan->conn;
struct l2cap_conn_rsp rsp;
u16 result;
if (test_bit(FLAG_DEFER_SETUP, &chan->flags))
result = L2CAP_CR_SEC_BLOCK;
else
result = L2CAP_CR_BAD_PSM;
l2cap_state_change(chan, BT_DISCONN);
rsp.scid = cpu_to_le16(chan->dcid);
rsp.dcid = cpu_to_le16(chan->scid);
rsp.result = cpu_to_le16(result);
rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_RSP, sizeof(rsp), &rsp);
}
void l2cap_chan_close(struct l2cap_chan *chan, int reason)
{
struct l2cap_conn *conn = chan->conn;
BT_DBG("chan %p state %s", chan, state_to_string(chan->state));
switch (chan->state) {
case BT_LISTEN:
chan->ops->teardown(chan, 0);
break;
case BT_CONNECTED:
case BT_CONFIG:
if (chan->chan_type == L2CAP_CHAN_CONN_ORIENTED) {
__set_chan_timer(chan, chan->ops->get_sndtimeo(chan));
l2cap_send_disconn_req(chan, reason);
} else
l2cap_chan_del(chan, reason);
break;
case BT_CONNECT2:
if (chan->chan_type == L2CAP_CHAN_CONN_ORIENTED) {
if (conn->hcon->type == ACL_LINK)
l2cap_chan_connect_reject(chan);
else if (conn->hcon->type == LE_LINK)
l2cap_chan_le_connect_reject(chan);
}
l2cap_chan_del(chan, reason);
break;
case BT_CONNECT:
case BT_DISCONN:
l2cap_chan_del(chan, reason);
break;
default:
chan->ops->teardown(chan, 0);
break;
}
}
EXPORT_SYMBOL(l2cap_chan_close);
static inline u8 l2cap_get_auth_type(struct l2cap_chan *chan)
{
switch (chan->chan_type) {
case L2CAP_CHAN_RAW:
switch (chan->sec_level) {
case BT_SECURITY_HIGH:
case BT_SECURITY_FIPS:
return HCI_AT_DEDICATED_BONDING_MITM;
case BT_SECURITY_MEDIUM:
return HCI_AT_DEDICATED_BONDING;
default:
return HCI_AT_NO_BONDING;
}
break;
case L2CAP_CHAN_CONN_LESS:
if (chan->psm == cpu_to_le16(L2CAP_PSM_3DSP)) {
if (chan->sec_level == BT_SECURITY_LOW)
chan->sec_level = BT_SECURITY_SDP;
}
if (chan->sec_level == BT_SECURITY_HIGH ||
chan->sec_level == BT_SECURITY_FIPS)
return HCI_AT_NO_BONDING_MITM;
else
return HCI_AT_NO_BONDING;
break;
case L2CAP_CHAN_CONN_ORIENTED:
if (chan->psm == cpu_to_le16(L2CAP_PSM_SDP)) {
if (chan->sec_level == BT_SECURITY_LOW)
chan->sec_level = BT_SECURITY_SDP;
if (chan->sec_level == BT_SECURITY_HIGH ||
chan->sec_level == BT_SECURITY_FIPS)
return HCI_AT_NO_BONDING_MITM;
else
return HCI_AT_NO_BONDING;
}
/* fall through */
default:
switch (chan->sec_level) {
case BT_SECURITY_HIGH:
case BT_SECURITY_FIPS:
return HCI_AT_GENERAL_BONDING_MITM;
case BT_SECURITY_MEDIUM:
return HCI_AT_GENERAL_BONDING;
default:
return HCI_AT_NO_BONDING;
}
break;
}
}
/* Service level security */
int l2cap_chan_check_security(struct l2cap_chan *chan, bool initiator)
{
struct l2cap_conn *conn = chan->conn;
__u8 auth_type;
if (conn->hcon->type == LE_LINK)
return smp_conn_security(conn->hcon, chan->sec_level);
auth_type = l2cap_get_auth_type(chan);
return hci_conn_security(conn->hcon, chan->sec_level, auth_type,
initiator);
}
static u8 l2cap_get_ident(struct l2cap_conn *conn)
{
u8 id;
/* Get next available identificator.
* 1 - 128 are used by kernel.
* 129 - 199 are reserved.
* 200 - 254 are used by utilities like l2ping, etc.
*/
mutex_lock(&conn->ident_lock);
if (++conn->tx_ident > 128)
conn->tx_ident = 1;
id = conn->tx_ident;
mutex_unlock(&conn->ident_lock);
return id;
}
static void l2cap_send_cmd(struct l2cap_conn *conn, u8 ident, u8 code, u16 len,
void *data)
{
struct sk_buff *skb = l2cap_build_cmd(conn, code, ident, len, data);
Bluetooth: Use non-flushable by default L2CAP data packets Modification of Nick Pelly <npelly@google.com> patch. With Bluetooth 2.1 ACL packets can be flushable or non-flushable. This commit makes ACL data packets non-flushable by default on compatible chipsets, and adds the BT_FLUSHABLE socket option to explicitly request flushable ACL data packets for a given L2CAP socket. This is useful for A2DP data which can be safely discarded if it can not be delivered within a short time (while other ACL data should not be discarded). Note that making ACL data flushable has no effect unless the automatic flush timeout for that ACL link is changed from its default of 0 (infinite). Default packet types (for compatible chipsets): Frame 34: 13 bytes on wire (104 bits), 13 bytes captured (104 bits) Bluetooth HCI H4 Bluetooth HCI ACL Packet .... 0000 0000 0010 = Connection Handle: 0x0002 ..00 .... .... .... = PB Flag: First Non-automatically Flushable Packet (0) 00.. .... .... .... = BC Flag: Point-To-Point (0) Data Total Length: 8 Bluetooth L2CAP Packet After setting BT_FLUSHABLE (sock.setsockopt(274 /*SOL_BLUETOOTH*/, 8 /* BT_FLUSHABLE */, 1 /* flush */)) Frame 34: 13 bytes on wire (104 bits), 13 bytes captured (104 bits) Bluetooth HCI H4 Bluetooth HCI ACL Packet .... 0000 0000 0010 = Connection Handle: 0x0002 ..10 .... .... .... = PB Flag: First Automatically Flushable Packet (2) 00.. .... .... .... = BC Flag: Point-To-Point (0) Data Total Length: 8 Bluetooth L2CAP Packet Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-01-03 09:14:36 +00:00
u8 flags;
BT_DBG("code 0x%2.2x", code);
if (!skb)
return;
/* Use NO_FLUSH if supported or we have an LE link (which does
* not support auto-flushing packets) */
if (lmp_no_flush_capable(conn->hcon->hdev) ||
conn->hcon->type == LE_LINK)
Bluetooth: Use non-flushable by default L2CAP data packets Modification of Nick Pelly <npelly@google.com> patch. With Bluetooth 2.1 ACL packets can be flushable or non-flushable. This commit makes ACL data packets non-flushable by default on compatible chipsets, and adds the BT_FLUSHABLE socket option to explicitly request flushable ACL data packets for a given L2CAP socket. This is useful for A2DP data which can be safely discarded if it can not be delivered within a short time (while other ACL data should not be discarded). Note that making ACL data flushable has no effect unless the automatic flush timeout for that ACL link is changed from its default of 0 (infinite). Default packet types (for compatible chipsets): Frame 34: 13 bytes on wire (104 bits), 13 bytes captured (104 bits) Bluetooth HCI H4 Bluetooth HCI ACL Packet .... 0000 0000 0010 = Connection Handle: 0x0002 ..00 .... .... .... = PB Flag: First Non-automatically Flushable Packet (0) 00.. .... .... .... = BC Flag: Point-To-Point (0) Data Total Length: 8 Bluetooth L2CAP Packet After setting BT_FLUSHABLE (sock.setsockopt(274 /*SOL_BLUETOOTH*/, 8 /* BT_FLUSHABLE */, 1 /* flush */)) Frame 34: 13 bytes on wire (104 bits), 13 bytes captured (104 bits) Bluetooth HCI H4 Bluetooth HCI ACL Packet .... 0000 0000 0010 = Connection Handle: 0x0002 ..10 .... .... .... = PB Flag: First Automatically Flushable Packet (2) 00.. .... .... .... = BC Flag: Point-To-Point (0) Data Total Length: 8 Bluetooth L2CAP Packet Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-01-03 09:14:36 +00:00
flags = ACL_START_NO_FLUSH;
else
flags = ACL_START;
bt_cb(skb)->force_active = BT_POWER_FORCE_ACTIVE_ON;
skb->priority = HCI_PRIO_MAX;
hci_send_acl(conn->hchan, skb, flags);
}
static bool __chan_is_moving(struct l2cap_chan *chan)
{
return chan->move_state != L2CAP_MOVE_STABLE &&
chan->move_state != L2CAP_MOVE_WAIT_PREPARE;
}
static void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb)
{
struct hci_conn *hcon = chan->conn->hcon;
u16 flags;
BT_DBG("chan %p, skb %p len %d priority %u", chan, skb, skb->len,
skb->priority);
if (chan->hs_hcon && !__chan_is_moving(chan)) {
if (chan->hs_hchan)
hci_send_acl(chan->hs_hchan, skb, ACL_COMPLETE);
else
kfree_skb(skb);
return;
}
/* Use NO_FLUSH for LE links (where this is the only option) or
* if the BR/EDR link supports it and flushing has not been
* explicitly requested (through FLAG_FLUSHABLE).
*/
if (hcon->type == LE_LINK ||
(!test_bit(FLAG_FLUSHABLE, &chan->flags) &&
lmp_no_flush_capable(hcon->hdev)))
flags = ACL_START_NO_FLUSH;
else
flags = ACL_START;
bt_cb(skb)->force_active = test_bit(FLAG_FORCE_ACTIVE, &chan->flags);
hci_send_acl(chan->conn->hchan, skb, flags);
}
static void __unpack_enhanced_control(u16 enh, struct l2cap_ctrl *control)
{
control->reqseq = (enh & L2CAP_CTRL_REQSEQ) >> L2CAP_CTRL_REQSEQ_SHIFT;
control->final = (enh & L2CAP_CTRL_FINAL) >> L2CAP_CTRL_FINAL_SHIFT;
if (enh & L2CAP_CTRL_FRAME_TYPE) {
/* S-Frame */
control->sframe = 1;
control->poll = (enh & L2CAP_CTRL_POLL) >> L2CAP_CTRL_POLL_SHIFT;
control->super = (enh & L2CAP_CTRL_SUPERVISE) >> L2CAP_CTRL_SUPER_SHIFT;
control->sar = 0;
control->txseq = 0;
} else {
/* I-Frame */
control->sframe = 0;
control->sar = (enh & L2CAP_CTRL_SAR) >> L2CAP_CTRL_SAR_SHIFT;
control->txseq = (enh & L2CAP_CTRL_TXSEQ) >> L2CAP_CTRL_TXSEQ_SHIFT;
control->poll = 0;
control->super = 0;
}
}
static void __unpack_extended_control(u32 ext, struct l2cap_ctrl *control)
{
control->reqseq = (ext & L2CAP_EXT_CTRL_REQSEQ) >> L2CAP_EXT_CTRL_REQSEQ_SHIFT;
control->final = (ext & L2CAP_EXT_CTRL_FINAL) >> L2CAP_EXT_CTRL_FINAL_SHIFT;
if (ext & L2CAP_EXT_CTRL_FRAME_TYPE) {
/* S-Frame */
control->sframe = 1;
control->poll = (ext & L2CAP_EXT_CTRL_POLL) >> L2CAP_EXT_CTRL_POLL_SHIFT;
control->super = (ext & L2CAP_EXT_CTRL_SUPERVISE) >> L2CAP_EXT_CTRL_SUPER_SHIFT;
control->sar = 0;
control->txseq = 0;
} else {
/* I-Frame */
control->sframe = 0;
control->sar = (ext & L2CAP_EXT_CTRL_SAR) >> L2CAP_EXT_CTRL_SAR_SHIFT;
control->txseq = (ext & L2CAP_EXT_CTRL_TXSEQ) >> L2CAP_EXT_CTRL_TXSEQ_SHIFT;
control->poll = 0;
control->super = 0;
}
}
static inline void __unpack_control(struct l2cap_chan *chan,
struct sk_buff *skb)
{
if (test_bit(FLAG_EXT_CTRL, &chan->flags)) {
__unpack_extended_control(get_unaligned_le32(skb->data),
&bt_cb(skb)->l2cap);
skb_pull(skb, L2CAP_EXT_CTRL_SIZE);
} else {
__unpack_enhanced_control(get_unaligned_le16(skb->data),
&bt_cb(skb)->l2cap);
skb_pull(skb, L2CAP_ENH_CTRL_SIZE);
}
}
static u32 __pack_extended_control(struct l2cap_ctrl *control)
{
u32 packed;
packed = control->reqseq << L2CAP_EXT_CTRL_REQSEQ_SHIFT;
packed |= control->final << L2CAP_EXT_CTRL_FINAL_SHIFT;
if (control->sframe) {
packed |= control->poll << L2CAP_EXT_CTRL_POLL_SHIFT;
packed |= control->super << L2CAP_EXT_CTRL_SUPER_SHIFT;
packed |= L2CAP_EXT_CTRL_FRAME_TYPE;
} else {
packed |= control->sar << L2CAP_EXT_CTRL_SAR_SHIFT;
packed |= control->txseq << L2CAP_EXT_CTRL_TXSEQ_SHIFT;
}
return packed;
}
static u16 __pack_enhanced_control(struct l2cap_ctrl *control)
{
u16 packed;
packed = control->reqseq << L2CAP_CTRL_REQSEQ_SHIFT;
packed |= control->final << L2CAP_CTRL_FINAL_SHIFT;
if (control->sframe) {
packed |= control->poll << L2CAP_CTRL_POLL_SHIFT;
packed |= control->super << L2CAP_CTRL_SUPER_SHIFT;
packed |= L2CAP_CTRL_FRAME_TYPE;
} else {
packed |= control->sar << L2CAP_CTRL_SAR_SHIFT;
packed |= control->txseq << L2CAP_CTRL_TXSEQ_SHIFT;
}
return packed;
}
static inline void __pack_control(struct l2cap_chan *chan,
struct l2cap_ctrl *control,
struct sk_buff *skb)
{
if (test_bit(FLAG_EXT_CTRL, &chan->flags)) {
put_unaligned_le32(__pack_extended_control(control),
skb->data + L2CAP_HDR_SIZE);
} else {
put_unaligned_le16(__pack_enhanced_control(control),
skb->data + L2CAP_HDR_SIZE);
}
}
static inline unsigned int __ertm_hdr_size(struct l2cap_chan *chan)
{
if (test_bit(FLAG_EXT_CTRL, &chan->flags))
return L2CAP_EXT_HDR_SIZE;
else
return L2CAP_ENH_HDR_SIZE;
}
static struct sk_buff *l2cap_create_sframe_pdu(struct l2cap_chan *chan,
u32 control)
{
struct sk_buff *skb;
struct l2cap_hdr *lh;
int hlen = __ertm_hdr_size(chan);
if (chan->fcs == L2CAP_FCS_CRC16)
hlen += L2CAP_FCS_SIZE;
skb = bt_skb_alloc(hlen, GFP_KERNEL);
if (!skb)
return ERR_PTR(-ENOMEM);
lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
lh->len = cpu_to_le16(hlen - L2CAP_HDR_SIZE);
lh->cid = cpu_to_le16(chan->dcid);
if (test_bit(FLAG_EXT_CTRL, &chan->flags))
put_unaligned_le32(control, skb_put(skb, L2CAP_EXT_CTRL_SIZE));
else
put_unaligned_le16(control, skb_put(skb, L2CAP_ENH_CTRL_SIZE));
if (chan->fcs == L2CAP_FCS_CRC16) {
u16 fcs = crc16(0, (u8 *)skb->data, skb->len);
put_unaligned_le16(fcs, skb_put(skb, L2CAP_FCS_SIZE));
}
skb->priority = HCI_PRIO_MAX;
return skb;
}
static void l2cap_send_sframe(struct l2cap_chan *chan,
struct l2cap_ctrl *control)
{
struct sk_buff *skb;
u32 control_field;
BT_DBG("chan %p, control %p", chan, control);
if (!control->sframe)
return;
if (__chan_is_moving(chan))
return;
if (test_and_clear_bit(CONN_SEND_FBIT, &chan->conn_state) &&
!control->poll)
control->final = 1;
if (control->super == L2CAP_SUPER_RR)
clear_bit(CONN_RNR_SENT, &chan->conn_state);
else if (control->super == L2CAP_SUPER_RNR)
set_bit(CONN_RNR_SENT, &chan->conn_state);
if (control->super != L2CAP_SUPER_SREJ) {
chan->last_acked_seq = control->reqseq;
__clear_ack_timer(chan);
}
BT_DBG("reqseq %d, final %d, poll %d, super %d", control->reqseq,
control->final, control->poll, control->super);
if (test_bit(FLAG_EXT_CTRL, &chan->flags))
control_field = __pack_extended_control(control);
else
control_field = __pack_enhanced_control(control);
skb = l2cap_create_sframe_pdu(chan, control_field);
if (!IS_ERR(skb))
l2cap_do_send(chan, skb);
}
static void l2cap_send_rr_or_rnr(struct l2cap_chan *chan, bool poll)
{
struct l2cap_ctrl control;
BT_DBG("chan %p, poll %d", chan, poll);
memset(&control, 0, sizeof(control));
control.sframe = 1;
control.poll = poll;
if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state))
control.super = L2CAP_SUPER_RNR;
else
control.super = L2CAP_SUPER_RR;
control.reqseq = chan->buffer_seq;
l2cap_send_sframe(chan, &control);
}
static inline int __l2cap_no_conn_pending(struct l2cap_chan *chan)
{
if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED)
return true;
return !test_bit(CONF_CONNECT_PEND, &chan->conf_state);
}
static bool __amp_capable(struct l2cap_chan *chan)
{
struct l2cap_conn *conn = chan->conn;
struct hci_dev *hdev;
bool amp_available = false;
if (!(conn->local_fixed_chan & L2CAP_FC_A2MP))
return false;
if (!(conn->remote_fixed_chan & L2CAP_FC_A2MP))
return false;
read_lock(&hci_dev_list_lock);
list_for_each_entry(hdev, &hci_dev_list, list) {
if (hdev->amp_type != AMP_TYPE_BREDR &&
test_bit(HCI_UP, &hdev->flags)) {
amp_available = true;
break;
}
}
read_unlock(&hci_dev_list_lock);
if (chan->chan_policy == BT_CHANNEL_POLICY_AMP_PREFERRED)
return amp_available;
return false;
}
static bool l2cap_check_efs(struct l2cap_chan *chan)
{
/* Check EFS parameters */
return true;
}
void l2cap_send_conn_req(struct l2cap_chan *chan)
{
struct l2cap_conn *conn = chan->conn;
struct l2cap_conn_req req;
req.scid = cpu_to_le16(chan->scid);
req.psm = chan->psm;
chan->ident = l2cap_get_ident(conn);
set_bit(CONF_CONNECT_PEND, &chan->conf_state);
l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_REQ, sizeof(req), &req);
}
static void l2cap_send_create_chan_req(struct l2cap_chan *chan, u8 amp_id)
{
struct l2cap_create_chan_req req;
req.scid = cpu_to_le16(chan->scid);
req.psm = chan->psm;
req.amp_id = amp_id;
chan->ident = l2cap_get_ident(chan->conn);
l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CREATE_CHAN_REQ,
sizeof(req), &req);
}
static void l2cap_move_setup(struct l2cap_chan *chan)
{
struct sk_buff *skb;
BT_DBG("chan %p", chan);
if (chan->mode != L2CAP_MODE_ERTM)
return;
__clear_retrans_timer(chan);
__clear_monitor_timer(chan);
__clear_ack_timer(chan);
chan->retry_count = 0;
skb_queue_walk(&chan->tx_q, skb) {
if (bt_cb(skb)->l2cap.retries)
bt_cb(skb)->l2cap.retries = 1;
else
break;
}
chan->expected_tx_seq = chan->buffer_seq;
clear_bit(CONN_REJ_ACT, &chan->conn_state);
clear_bit(CONN_SREJ_ACT, &chan->conn_state);
l2cap_seq_list_clear(&chan->retrans_list);
l2cap_seq_list_clear(&chan->srej_list);
skb_queue_purge(&chan->srej_q);
chan->tx_state = L2CAP_TX_STATE_XMIT;
chan->rx_state = L2CAP_RX_STATE_MOVE;
set_bit(CONN_REMOTE_BUSY, &chan->conn_state);
}
static void l2cap_move_done(struct l2cap_chan *chan)
{
u8 move_role = chan->move_role;
BT_DBG("chan %p", chan);
chan->move_state = L2CAP_MOVE_STABLE;
chan->move_role = L2CAP_MOVE_ROLE_NONE;
if (chan->mode != L2CAP_MODE_ERTM)
return;
switch (move_role) {
case L2CAP_MOVE_ROLE_INITIATOR:
l2cap_tx(chan, NULL, NULL, L2CAP_EV_EXPLICIT_POLL);
chan->rx_state = L2CAP_RX_STATE_WAIT_F;
break;
case L2CAP_MOVE_ROLE_RESPONDER:
chan->rx_state = L2CAP_RX_STATE_WAIT_P;
break;
}
}
static void l2cap_chan_ready(struct l2cap_chan *chan)
{
/* The channel may have already been flagged as connected in
* case of receiving data before the L2CAP info req/rsp
* procedure is complete.
*/
if (chan->state == BT_CONNECTED)
return;
/* This clears all conf flags, including CONF_NOT_COMPLETE */
chan->conf_state = 0;
__clear_chan_timer(chan);
if (chan->mode == L2CAP_MODE_LE_FLOWCTL && !chan->tx_credits)
chan->ops->suspend(chan);
chan->state = BT_CONNECTED;
chan->ops->ready(chan);
}
static void l2cap_le_connect(struct l2cap_chan *chan)
{
struct l2cap_conn *conn = chan->conn;
struct l2cap_le_conn_req req;
if (test_and_set_bit(FLAG_LE_CONN_REQ_SENT, &chan->flags))
return;
req.psm = chan->psm;
req.scid = cpu_to_le16(chan->scid);
req.mtu = cpu_to_le16(chan->imtu);
req.mps = cpu_to_le16(chan->mps);
req.credits = cpu_to_le16(chan->rx_credits);
chan->ident = l2cap_get_ident(conn);
l2cap_send_cmd(conn, chan->ident, L2CAP_LE_CONN_REQ,
sizeof(req), &req);
}
static void l2cap_le_start(struct l2cap_chan *chan)
{
struct l2cap_conn *conn = chan->conn;
if (!smp_conn_security(conn->hcon, chan->sec_level))
return;
if (!chan->psm) {
l2cap_chan_ready(chan);
return;
}
if (chan->state == BT_CONNECT)
l2cap_le_connect(chan);
}
static void l2cap_start_connection(struct l2cap_chan *chan)
{
if (__amp_capable(chan)) {
BT_DBG("chan %p AMP capable: discover AMPs", chan);
a2mp_discover_amp(chan);
} else if (chan->conn->hcon->type == LE_LINK) {
l2cap_le_start(chan);
} else {
l2cap_send_conn_req(chan);
}
}
static void l2cap_request_info(struct l2cap_conn *conn)
{
struct l2cap_info_req req;
if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT)
return;
req.type = cpu_to_le16(L2CAP_IT_FEAT_MASK);
conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_SENT;
conn->info_ident = l2cap_get_ident(conn);
schedule_delayed_work(&conn->info_timer, L2CAP_INFO_TIMEOUT);
l2cap_send_cmd(conn, conn->info_ident, L2CAP_INFO_REQ,
sizeof(req), &req);
}
static void l2cap_do_start(struct l2cap_chan *chan)
{
struct l2cap_conn *conn = chan->conn;
if (conn->hcon->type == LE_LINK) {
l2cap_le_start(chan);
return;
}
if (!(conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT)) {
l2cap_request_info(conn);
return;
}
if (!(conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE))
return;
if (l2cap_chan_check_security(chan, true) &&
__l2cap_no_conn_pending(chan))
l2cap_start_connection(chan);
}
static inline int l2cap_mode_supported(__u8 mode, __u32 feat_mask)
{
u32 local_feat_mask = l2cap_feat_mask;
if (!disable_ertm)
local_feat_mask |= L2CAP_FEAT_ERTM | L2CAP_FEAT_STREAMING;
switch (mode) {
case L2CAP_MODE_ERTM:
return L2CAP_FEAT_ERTM & feat_mask & local_feat_mask;
case L2CAP_MODE_STREAMING:
return L2CAP_FEAT_STREAMING & feat_mask & local_feat_mask;
default:
return 0x00;
}
}
static void l2cap_send_disconn_req(struct l2cap_chan *chan, int err)
{
struct l2cap_conn *conn = chan->conn;
struct l2cap_disconn_req req;
if (!conn)
return;
if (chan->mode == L2CAP_MODE_ERTM && chan->state == BT_CONNECTED) {
__clear_retrans_timer(chan);
__clear_monitor_timer(chan);
__clear_ack_timer(chan);
}
if (chan->scid == L2CAP_CID_A2MP) {
l2cap_state_change(chan, BT_DISCONN);
return;
}
req.dcid = cpu_to_le16(chan->dcid);
req.scid = cpu_to_le16(chan->scid);
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_DISCONN_REQ,
sizeof(req), &req);
l2cap_state_change_and_error(chan, BT_DISCONN, err);
}
/* ---- L2CAP connections ---- */
static void l2cap_conn_start(struct l2cap_conn *conn)
{
struct l2cap_chan *chan, *tmp;
BT_DBG("conn %p", conn);
mutex_lock(&conn->chan_lock);
list_for_each_entry_safe(chan, tmp, &conn->chan_l, list) {
l2cap_chan_lock(chan);
if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
l2cap_chan_ready(chan);
l2cap_chan_unlock(chan);
continue;
}
if (chan->state == BT_CONNECT) {
if (!l2cap_chan_check_security(chan, true) ||
!__l2cap_no_conn_pending(chan)) {
l2cap_chan_unlock(chan);
continue;
}
if (!l2cap_mode_supported(chan->mode, conn->feat_mask)
&& test_bit(CONF_STATE2_DEVICE,
&chan->conf_state)) {
l2cap_chan_close(chan, ECONNRESET);
l2cap_chan_unlock(chan);
continue;
}
l2cap_start_connection(chan);
} else if (chan->state == BT_CONNECT2) {
struct l2cap_conn_rsp rsp;
char buf[128];
rsp.scid = cpu_to_le16(chan->dcid);
rsp.dcid = cpu_to_le16(chan->scid);
if (l2cap_chan_check_security(chan, false)) {
if (test_bit(FLAG_DEFER_SETUP, &chan->flags)) {
rsp.result = cpu_to_le16(L2CAP_CR_PEND);
rsp.status = cpu_to_le16(L2CAP_CS_AUTHOR_PEND);
chan->ops->defer(chan);
} else {
l2cap_state_change(chan, BT_CONFIG);
rsp.result = cpu_to_le16(L2CAP_CR_SUCCESS);
rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
}
} else {
rsp.result = cpu_to_le16(L2CAP_CR_PEND);
rsp.status = cpu_to_le16(L2CAP_CS_AUTHEN_PEND);
}
l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_RSP,
sizeof(rsp), &rsp);
if (test_bit(CONF_REQ_SENT, &chan->conf_state) ||
rsp.result != L2CAP_CR_SUCCESS) {
l2cap_chan_unlock(chan);
continue;
}
set_bit(CONF_REQ_SENT, &chan->conf_state);
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
l2cap_build_conf_req(chan, buf), buf);
chan->num_conf_req++;
}
l2cap_chan_unlock(chan);
}
mutex_unlock(&conn->chan_lock);
}
static void l2cap_le_conn_ready(struct l2cap_conn *conn)
{
struct hci_conn *hcon = conn->hcon;
struct hci_dev *hdev = hcon->hdev;
BT_DBG("%s conn %p", hdev->name, conn);
/* For outgoing pairing which doesn't necessarily have an
* associated socket (e.g. mgmt_pair_device).
*/
if (hcon->out)
smp_conn_security(hcon, hcon->pending_sec_level);
/* For LE slave connections, make sure the connection interval
* is in the range of the minium and maximum interval that has
* been configured for this connection. If not, then trigger
* the connection update procedure.
*/
if (hcon->role == HCI_ROLE_SLAVE &&
(hcon->le_conn_interval < hcon->le_conn_min_interval ||
hcon->le_conn_interval > hcon->le_conn_max_interval)) {
struct l2cap_conn_param_update_req req;
req.min = cpu_to_le16(hcon->le_conn_min_interval);
req.max = cpu_to_le16(hcon->le_conn_max_interval);
req.latency = cpu_to_le16(hcon->le_conn_latency);
req.to_multiplier = cpu_to_le16(hcon->le_supv_timeout);
l2cap_send_cmd(conn, l2cap_get_ident(conn),
L2CAP_CONN_PARAM_UPDATE_REQ, sizeof(req), &req);
}
}
static void l2cap_conn_ready(struct l2cap_conn *conn)
{
struct l2cap_chan *chan;
struct hci_conn *hcon = conn->hcon;
BT_DBG("conn %p", conn);
if (hcon->type == ACL_LINK)
l2cap_request_info(conn);
mutex_lock(&conn->chan_lock);
list_for_each_entry(chan, &conn->chan_l, list) {
l2cap_chan_lock(chan);
if (chan->scid == L2CAP_CID_A2MP) {
l2cap_chan_unlock(chan);
continue;
}
if (hcon->type == LE_LINK) {
l2cap_le_start(chan);
} else if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE)
l2cap_chan_ready(chan);
} else if (chan->state == BT_CONNECT) {
l2cap_do_start(chan);
}
l2cap_chan_unlock(chan);
}
mutex_unlock(&conn->chan_lock);
if (hcon->type == LE_LINK)
l2cap_le_conn_ready(conn);
queue_work(hcon->hdev->workqueue, &conn->pending_rx_work);
}
/* Notify sockets that we cannot guaranty reliability anymore */
static void l2cap_conn_unreliable(struct l2cap_conn *conn, int err)
{
struct l2cap_chan *chan;
BT_DBG("conn %p", conn);
mutex_lock(&conn->chan_lock);
list_for_each_entry(chan, &conn->chan_l, list) {
if (test_bit(FLAG_FORCE_RELIABLE, &chan->flags))
l2cap_chan_set_err(chan, err);
}
mutex_unlock(&conn->chan_lock);
}
static void l2cap_info_timeout(struct work_struct *work)
{
struct l2cap_conn *conn = container_of(work, struct l2cap_conn,
info_timer.work);
conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
conn->info_ident = 0;
l2cap_conn_start(conn);
}
Bluetooth: l2cap: add l2cap_user sub-modules Several sub-modules like HIDP, rfcomm, ... need to track l2cap connections. The l2cap_conn->hcon->dev object is used as parent for sysfs devices so the sub-modules need to be notified when the hci_conn object is removed from sysfs. As submodules normally use the l2cap layer, the l2cap_user objects are registered there instead of on the underlying hci_conn object. This avoids any direct dependency on the HCI layer and lets the l2cap core handle any specifics. This patch introduces l2cap_user objects which contain a "probe" and "remove" callback. You can register them on any l2cap_conn object and if it is active, the "probe" callback will get called. Otherwise, an error is returned. The l2cap_conn object will call your "remove" callback directly before it is removed from user-space. This allows you to remove your submodules _before_ the parent l2cap_conn and hci_conn object is removed. At any time you can asynchronously unregister your l2cap_user object if your submodule vanishes before the l2cap_conn object does. There is no way around l2cap_user. If we want wire-protocols in the kernel, we always want the hci_conn object as parent in the sysfs tree. We cannot use a channel here since we might need multiple channels for a single protocol. But the problem is, we _must_ get notified when an l2cap_conn object is removed. We cannot use reference-counting for object-removal! This is not how it works. If a hardware is removed, we should immediately remove the object from sysfs. Any other behavior would be inconsistent with the rest of the system. Also note that device_del() might sleep, but it doesn't wait for user-space or block very long. It only _unlinks_ the object from sysfs and the whole device-tree. Everything else is handled by ref-counts! This is exactly what the other sub-modules must do: unlink their devices when the "remove" l2cap_user callback is called. They should not do any cleanup or synchronous shutdowns. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:45 +00:00
/*
* l2cap_user
* External modules can register l2cap_user objects on l2cap_conn. The ->probe
* callback is called during registration. The ->remove callback is called
* during unregistration.
* An l2cap_user object can either be explicitly unregistered or when the
* underlying l2cap_conn object is deleted. This guarantees that l2cap->hcon,
* l2cap->hchan, .. are valid as long as the remove callback hasn't been called.
* External modules must own a reference to the l2cap_conn object if they intend
* to call l2cap_unregister_user(). The l2cap_conn object might get destroyed at
* any time if they don't.
*/
int l2cap_register_user(struct l2cap_conn *conn, struct l2cap_user *user)
{
struct hci_dev *hdev = conn->hcon->hdev;
int ret;
/* We need to check whether l2cap_conn is registered. If it is not, we
* must not register the l2cap_user. l2cap_conn_del() is unregisters
* l2cap_conn objects, but doesn't provide its own locking. Instead, it
* relies on the parent hci_conn object to be locked. This itself relies
* on the hci_dev object to be locked. So we must lock the hci device
* here, too. */
hci_dev_lock(hdev);
if (!list_empty(&user->list)) {
Bluetooth: l2cap: add l2cap_user sub-modules Several sub-modules like HIDP, rfcomm, ... need to track l2cap connections. The l2cap_conn->hcon->dev object is used as parent for sysfs devices so the sub-modules need to be notified when the hci_conn object is removed from sysfs. As submodules normally use the l2cap layer, the l2cap_user objects are registered there instead of on the underlying hci_conn object. This avoids any direct dependency on the HCI layer and lets the l2cap core handle any specifics. This patch introduces l2cap_user objects which contain a "probe" and "remove" callback. You can register them on any l2cap_conn object and if it is active, the "probe" callback will get called. Otherwise, an error is returned. The l2cap_conn object will call your "remove" callback directly before it is removed from user-space. This allows you to remove your submodules _before_ the parent l2cap_conn and hci_conn object is removed. At any time you can asynchronously unregister your l2cap_user object if your submodule vanishes before the l2cap_conn object does. There is no way around l2cap_user. If we want wire-protocols in the kernel, we always want the hci_conn object as parent in the sysfs tree. We cannot use a channel here since we might need multiple channels for a single protocol. But the problem is, we _must_ get notified when an l2cap_conn object is removed. We cannot use reference-counting for object-removal! This is not how it works. If a hardware is removed, we should immediately remove the object from sysfs. Any other behavior would be inconsistent with the rest of the system. Also note that device_del() might sleep, but it doesn't wait for user-space or block very long. It only _unlinks_ the object from sysfs and the whole device-tree. Everything else is handled by ref-counts! This is exactly what the other sub-modules must do: unlink their devices when the "remove" l2cap_user callback is called. They should not do any cleanup or synchronous shutdowns. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:45 +00:00
ret = -EINVAL;
goto out_unlock;
}
/* conn->hchan is NULL after l2cap_conn_del() was called */
if (!conn->hchan) {
ret = -ENODEV;
goto out_unlock;
}
ret = user->probe(conn, user);
if (ret)
goto out_unlock;
list_add(&user->list, &conn->users);
ret = 0;
out_unlock:
hci_dev_unlock(hdev);
return ret;
}
EXPORT_SYMBOL(l2cap_register_user);
void l2cap_unregister_user(struct l2cap_conn *conn, struct l2cap_user *user)
{
struct hci_dev *hdev = conn->hcon->hdev;
hci_dev_lock(hdev);
if (list_empty(&user->list))
Bluetooth: l2cap: add l2cap_user sub-modules Several sub-modules like HIDP, rfcomm, ... need to track l2cap connections. The l2cap_conn->hcon->dev object is used as parent for sysfs devices so the sub-modules need to be notified when the hci_conn object is removed from sysfs. As submodules normally use the l2cap layer, the l2cap_user objects are registered there instead of on the underlying hci_conn object. This avoids any direct dependency on the HCI layer and lets the l2cap core handle any specifics. This patch introduces l2cap_user objects which contain a "probe" and "remove" callback. You can register them on any l2cap_conn object and if it is active, the "probe" callback will get called. Otherwise, an error is returned. The l2cap_conn object will call your "remove" callback directly before it is removed from user-space. This allows you to remove your submodules _before_ the parent l2cap_conn and hci_conn object is removed. At any time you can asynchronously unregister your l2cap_user object if your submodule vanishes before the l2cap_conn object does. There is no way around l2cap_user. If we want wire-protocols in the kernel, we always want the hci_conn object as parent in the sysfs tree. We cannot use a channel here since we might need multiple channels for a single protocol. But the problem is, we _must_ get notified when an l2cap_conn object is removed. We cannot use reference-counting for object-removal! This is not how it works. If a hardware is removed, we should immediately remove the object from sysfs. Any other behavior would be inconsistent with the rest of the system. Also note that device_del() might sleep, but it doesn't wait for user-space or block very long. It only _unlinks_ the object from sysfs and the whole device-tree. Everything else is handled by ref-counts! This is exactly what the other sub-modules must do: unlink their devices when the "remove" l2cap_user callback is called. They should not do any cleanup or synchronous shutdowns. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:45 +00:00
goto out_unlock;
list_del_init(&user->list);
Bluetooth: l2cap: add l2cap_user sub-modules Several sub-modules like HIDP, rfcomm, ... need to track l2cap connections. The l2cap_conn->hcon->dev object is used as parent for sysfs devices so the sub-modules need to be notified when the hci_conn object is removed from sysfs. As submodules normally use the l2cap layer, the l2cap_user objects are registered there instead of on the underlying hci_conn object. This avoids any direct dependency on the HCI layer and lets the l2cap core handle any specifics. This patch introduces l2cap_user objects which contain a "probe" and "remove" callback. You can register them on any l2cap_conn object and if it is active, the "probe" callback will get called. Otherwise, an error is returned. The l2cap_conn object will call your "remove" callback directly before it is removed from user-space. This allows you to remove your submodules _before_ the parent l2cap_conn and hci_conn object is removed. At any time you can asynchronously unregister your l2cap_user object if your submodule vanishes before the l2cap_conn object does. There is no way around l2cap_user. If we want wire-protocols in the kernel, we always want the hci_conn object as parent in the sysfs tree. We cannot use a channel here since we might need multiple channels for a single protocol. But the problem is, we _must_ get notified when an l2cap_conn object is removed. We cannot use reference-counting for object-removal! This is not how it works. If a hardware is removed, we should immediately remove the object from sysfs. Any other behavior would be inconsistent with the rest of the system. Also note that device_del() might sleep, but it doesn't wait for user-space or block very long. It only _unlinks_ the object from sysfs and the whole device-tree. Everything else is handled by ref-counts! This is exactly what the other sub-modules must do: unlink their devices when the "remove" l2cap_user callback is called. They should not do any cleanup or synchronous shutdowns. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:45 +00:00
user->remove(conn, user);
out_unlock:
hci_dev_unlock(hdev);
}
EXPORT_SYMBOL(l2cap_unregister_user);
static void l2cap_unregister_all_users(struct l2cap_conn *conn)
{
struct l2cap_user *user;
while (!list_empty(&conn->users)) {
user = list_first_entry(&conn->users, struct l2cap_user, list);
list_del_init(&user->list);
Bluetooth: l2cap: add l2cap_user sub-modules Several sub-modules like HIDP, rfcomm, ... need to track l2cap connections. The l2cap_conn->hcon->dev object is used as parent for sysfs devices so the sub-modules need to be notified when the hci_conn object is removed from sysfs. As submodules normally use the l2cap layer, the l2cap_user objects are registered there instead of on the underlying hci_conn object. This avoids any direct dependency on the HCI layer and lets the l2cap core handle any specifics. This patch introduces l2cap_user objects which contain a "probe" and "remove" callback. You can register them on any l2cap_conn object and if it is active, the "probe" callback will get called. Otherwise, an error is returned. The l2cap_conn object will call your "remove" callback directly before it is removed from user-space. This allows you to remove your submodules _before_ the parent l2cap_conn and hci_conn object is removed. At any time you can asynchronously unregister your l2cap_user object if your submodule vanishes before the l2cap_conn object does. There is no way around l2cap_user. If we want wire-protocols in the kernel, we always want the hci_conn object as parent in the sysfs tree. We cannot use a channel here since we might need multiple channels for a single protocol. But the problem is, we _must_ get notified when an l2cap_conn object is removed. We cannot use reference-counting for object-removal! This is not how it works. If a hardware is removed, we should immediately remove the object from sysfs. Any other behavior would be inconsistent with the rest of the system. Also note that device_del() might sleep, but it doesn't wait for user-space or block very long. It only _unlinks_ the object from sysfs and the whole device-tree. Everything else is handled by ref-counts! This is exactly what the other sub-modules must do: unlink their devices when the "remove" l2cap_user callback is called. They should not do any cleanup or synchronous shutdowns. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:45 +00:00
user->remove(conn, user);
}
}
static void l2cap_conn_del(struct hci_conn *hcon, int err)
{
struct l2cap_conn *conn = hcon->l2cap_data;
struct l2cap_chan *chan, *l;
if (!conn)
return;
BT_DBG("hcon %p conn %p, err %d", hcon, conn, err);
kfree_skb(conn->rx_skb);
skb_queue_purge(&conn->pending_rx);
/* We can not call flush_work(&conn->pending_rx_work) here since we
* might block if we are running on a worker from the same workqueue
* pending_rx_work is waiting on.
*/
if (work_pending(&conn->pending_rx_work))
cancel_work_sync(&conn->pending_rx_work);
if (work_pending(&conn->id_addr_update_work))
cancel_work_sync(&conn->id_addr_update_work);
Bluetooth: l2cap: add l2cap_user sub-modules Several sub-modules like HIDP, rfcomm, ... need to track l2cap connections. The l2cap_conn->hcon->dev object is used as parent for sysfs devices so the sub-modules need to be notified when the hci_conn object is removed from sysfs. As submodules normally use the l2cap layer, the l2cap_user objects are registered there instead of on the underlying hci_conn object. This avoids any direct dependency on the HCI layer and lets the l2cap core handle any specifics. This patch introduces l2cap_user objects which contain a "probe" and "remove" callback. You can register them on any l2cap_conn object and if it is active, the "probe" callback will get called. Otherwise, an error is returned. The l2cap_conn object will call your "remove" callback directly before it is removed from user-space. This allows you to remove your submodules _before_ the parent l2cap_conn and hci_conn object is removed. At any time you can asynchronously unregister your l2cap_user object if your submodule vanishes before the l2cap_conn object does. There is no way around l2cap_user. If we want wire-protocols in the kernel, we always want the hci_conn object as parent in the sysfs tree. We cannot use a channel here since we might need multiple channels for a single protocol. But the problem is, we _must_ get notified when an l2cap_conn object is removed. We cannot use reference-counting for object-removal! This is not how it works. If a hardware is removed, we should immediately remove the object from sysfs. Any other behavior would be inconsistent with the rest of the system. Also note that device_del() might sleep, but it doesn't wait for user-space or block very long. It only _unlinks_ the object from sysfs and the whole device-tree. Everything else is handled by ref-counts! This is exactly what the other sub-modules must do: unlink their devices when the "remove" l2cap_user callback is called. They should not do any cleanup or synchronous shutdowns. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-06 18:28:45 +00:00
l2cap_unregister_all_users(conn);
/* Force the connection to be immediately dropped */
hcon->disc_timeout = 0;
mutex_lock(&conn->chan_lock);
/* Kill channels */
list_for_each_entry_safe(chan, l, &conn->chan_l, list) {
l2cap_chan_hold(chan);
l2cap_chan_lock(chan);
l2cap_chan_del(chan, err);
l2cap_chan_unlock(chan);
chan->ops->close(chan);
l2cap_chan_put(chan);
}
mutex_unlock(&conn->chan_lock);
hci_chan_del(conn->hchan);
if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT)
cancel_delayed_work_sync(&conn->info_timer);
hcon->l2cap_data = NULL;
conn->hchan = NULL;
l2cap_conn_put(conn);
}
static void l2cap_conn_free(struct kref *ref)
{
struct l2cap_conn *conn = container_of(ref, struct l2cap_conn, ref);
hci_conn_put(conn->hcon);
kfree(conn);
}
struct l2cap_conn *l2cap_conn_get(struct l2cap_conn *conn)
{
kref_get(&conn->ref);
return conn;
}
EXPORT_SYMBOL(l2cap_conn_get);
void l2cap_conn_put(struct l2cap_conn *conn)
{
kref_put(&conn->ref, l2cap_conn_free);
}
EXPORT_SYMBOL(l2cap_conn_put);
/* ---- Socket interface ---- */
/* Find socket with psm and source / destination bdaddr.
* Returns closest match.
*/
static struct l2cap_chan *l2cap_global_chan_by_psm(int state, __le16 psm,
bdaddr_t *src,
bdaddr_t *dst,
u8 link_type)
{
struct l2cap_chan *c, *c1 = NULL;
read_lock(&chan_list_lock);
list_for_each_entry(c, &chan_list, global_l) {
if (state && c->state != state)
continue;
if (link_type == ACL_LINK && c->src_type != BDADDR_BREDR)
continue;
if (link_type == LE_LINK && c->src_type == BDADDR_BREDR)
continue;
if (c->psm == psm) {
int src_match, dst_match;
int src_any, dst_any;
/* Exact match. */
src_match = !bacmp(&c->src, src);
dst_match = !bacmp(&c->dst, dst);
if (src_match && dst_match) {
l2cap_chan_hold(c);
read_unlock(&chan_list_lock);
return c;
}
/* Closest match */
src_any = !bacmp(&c->src, BDADDR_ANY);
dst_any = !bacmp(&c->dst, BDADDR_ANY);
if ((src_match && dst_any) || (src_any && dst_match) ||
(src_any && dst_any))
c1 = c;
}
}
if (c1)
l2cap_chan_hold(c1);
read_unlock(&chan_list_lock);
return c1;
}
static void l2cap_monitor_timeout(struct work_struct *work)
{
struct l2cap_chan *chan = container_of(work, struct l2cap_chan,
monitor_timer.work);
BT_DBG("chan %p", chan);
l2cap_chan_lock(chan);
if (!chan->conn) {
l2cap_chan_unlock(chan);
l2cap_chan_put(chan);
return;
}
l2cap_tx(chan, NULL, NULL, L2CAP_EV_MONITOR_TO);
l2cap_chan_unlock(chan);
l2cap_chan_put(chan);
}
static void l2cap_retrans_timeout(struct work_struct *work)
{
struct l2cap_chan *chan = container_of(work, struct l2cap_chan,
retrans_timer.work);
BT_DBG("chan %p", chan);
l2cap_chan_lock(chan);
if (!chan->conn) {
l2cap_chan_unlock(chan);
l2cap_chan_put(chan);
return;
}
l2cap_tx(chan, NULL, NULL, L2CAP_EV_RETRANS_TO);
l2cap_chan_unlock(chan);
l2cap_chan_put(chan);
}
static void l2cap_streaming_send(struct l2cap_chan *chan,
struct sk_buff_head *skbs)
{
struct sk_buff *skb;
struct l2cap_ctrl *control;
BT_DBG("chan %p, skbs %p", chan, skbs);
if (__chan_is_moving(chan))
return;
skb_queue_splice_tail_init(skbs, &chan->tx_q);
while (!skb_queue_empty(&chan->tx_q)) {
skb = skb_dequeue(&chan->tx_q);
bt_cb(skb)->l2cap.retries = 1;
control = &bt_cb(skb)->l2cap;
control->reqseq = 0;
control->txseq = chan->next_tx_seq;
__pack_control(chan, control, skb);
if (chan->fcs == L2CAP_FCS_CRC16) {
u16 fcs = crc16(0, (u8 *) skb->data, skb->len);
put_unaligned_le16(fcs, skb_put(skb, L2CAP_FCS_SIZE));
}
l2cap_do_send(chan, skb);
BT_DBG("Sent txseq %u", control->txseq);
chan->next_tx_seq = __next_seq(chan, chan->next_tx_seq);
chan->frames_sent++;
}
}
static int l2cap_ertm_send(struct l2cap_chan *chan)
{
struct sk_buff *skb, *tx_skb;
struct l2cap_ctrl *control;
int sent = 0;
BT_DBG("chan %p", chan);
if (chan->state != BT_CONNECTED)
return -ENOTCONN;
if (test_bit(CONN_REMOTE_BUSY, &chan->conn_state))
return 0;
if (__chan_is_moving(chan))
return 0;
while (chan->tx_send_head &&
chan->unacked_frames < chan->remote_tx_win &&
chan->tx_state == L2CAP_TX_STATE_XMIT) {
skb = chan->tx_send_head;
bt_cb(skb)->l2cap.retries = 1;
control = &bt_cb(skb)->l2cap;
if (test_and_clear_bit(CONN_SEND_FBIT, &chan->conn_state))
control->final = 1;
control->reqseq = chan->buffer_seq;
chan->last_acked_seq = chan->buffer_seq;
control->txseq = chan->next_tx_seq;
__pack_control(chan, control, skb);
if (chan->fcs == L2CAP_FCS_CRC16) {
u16 fcs = crc16(0, (u8 *) skb->data, skb->len);
put_unaligned_le16(fcs, skb_put(skb, L2CAP_FCS_SIZE));
}
/* Clone after data has been modified. Data is assumed to be
read-only (for locking purposes) on cloned sk_buffs.
*/
tx_skb = skb_clone(skb, GFP_KERNEL);
if (!tx_skb)
break;
__set_retrans_timer(chan);
chan->next_tx_seq = __next_seq(chan, chan->next_tx_seq);
chan->unacked_frames++;
chan->frames_sent++;
sent++;
if (skb_queue_is_last(&chan->tx_q, skb))
chan->tx_send_head = NULL;
else
chan->tx_send_head = skb_queue_next(&chan->tx_q, skb);
l2cap_do_send(chan, tx_skb);
BT_DBG("Sent txseq %u", control->txseq);
}
BT_DBG("Sent %d, %u unacked, %u in ERTM queue", sent,
chan->unacked_frames, skb_queue_len(&chan->tx_q));
return sent;
}
static void l2cap_ertm_resend(struct l2cap_chan *chan)
{
struct l2cap_ctrl control;
struct sk_buff *skb;
struct sk_buff *tx_skb;
u16 seq;
BT_DBG("chan %p", chan);
if (test_bit(CONN_REMOTE_BUSY, &chan->conn_state))
return;
if (__chan_is_moving(chan))
return;
while (chan->retrans_list.head != L2CAP_SEQ_LIST_CLEAR) {
seq = l2cap_seq_list_pop(&chan->retrans_list);
skb = l2cap_ertm_seq_in_queue(&chan->tx_q, seq);
if (!skb) {
BT_DBG("Error: Can't retransmit seq %d, frame missing",
seq);
continue;
}
bt_cb(skb)->l2cap.retries++;
control = bt_cb(skb)->l2cap;
if (chan->max_tx != 0 &&
bt_cb(skb)->l2cap.retries > chan->max_tx) {
BT_DBG("Retry limit exceeded (%d)", chan->max_tx);
l2cap_send_disconn_req(chan, ECONNRESET);
l2cap_seq_list_clear(&chan->retrans_list);
break;
}
control.reqseq = chan->buffer_seq;
if (test_and_clear_bit(CONN_SEND_FBIT, &chan->conn_state))
control.final = 1;
else
control.final = 0;
if (skb_cloned(skb)) {
/* Cloned sk_buffs are read-only, so we need a
* writeable copy
*/
tx_skb = skb_copy(skb, GFP_KERNEL);
} else {
tx_skb = skb_clone(skb, GFP_KERNEL);
}
if (!tx_skb) {
l2cap_seq_list_clear(&chan->retrans_list);
break;
}
/* Update skb contents */
if (test_bit(FLAG_EXT_CTRL, &chan->flags)) {
put_unaligned_le32(__pack_extended_control(&control),
tx_skb->data + L2CAP_HDR_SIZE);
} else {
put_unaligned_le16(__pack_enhanced_control(&control),
tx_skb->data + L2CAP_HDR_SIZE);
}
/* Update FCS */
if (chan->fcs == L2CAP_FCS_CRC16) {
u16 fcs = crc16(0, (u8 *) tx_skb->data,
tx_skb->len - L2CAP_FCS_SIZE);
put_unaligned_le16(fcs, skb_tail_pointer(tx_skb) -
L2CAP_FCS_SIZE);
}
l2cap_do_send(chan, tx_skb);
BT_DBG("Resent txseq %d", control.txseq);
chan->last_acked_seq = chan->buffer_seq;
}
}
static void l2cap_retransmit(struct l2cap_chan *chan,
struct l2cap_ctrl *control)
{
BT_DBG("chan %p, control %p", chan, control);
l2cap_seq_list_append(&chan->retrans_list, control->reqseq);
l2cap_ertm_resend(chan);
}
static void l2cap_retransmit_all(struct l2cap_chan *chan,
struct l2cap_ctrl *control)
{
struct sk_buff *skb;
BT_DBG("chan %p, control %p", chan, control);
if (control->poll)
set_bit(CONN_SEND_FBIT, &chan->conn_state);
l2cap_seq_list_clear(&chan->retrans_list);
if (test_bit(CONN_REMOTE_BUSY, &chan->conn_state))
return;
if (chan->unacked_frames) {
skb_queue_walk(&chan->tx_q, skb) {
if (bt_cb(skb)->l2cap.txseq == control->reqseq ||
skb == chan->tx_send_head)
break;
}
skb_queue_walk_from(&chan->tx_q, skb) {
if (skb == chan->tx_send_head)
break;
l2cap_seq_list_append(&chan->retrans_list,
bt_cb(skb)->l2cap.txseq);
}
l2cap_ertm_resend(chan);
}
}
static void l2cap_send_ack(struct l2cap_chan *chan)
{
struct l2cap_ctrl control;
u16 frames_to_ack = __seq_offset(chan, chan->buffer_seq,
chan->last_acked_seq);
int threshold;
BT_DBG("chan %p last_acked_seq %d buffer_seq %d",
chan, chan->last_acked_seq, chan->buffer_seq);
memset(&control, 0, sizeof(control));
control.sframe = 1;
if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state) &&
chan->rx_state == L2CAP_RX_STATE_RECV) {
__clear_ack_timer(chan);
control.super = L2CAP_SUPER_RNR;
control.reqseq = chan->buffer_seq;
l2cap_send_sframe(chan, &control);
} else {
if (!test_bit(CONN_REMOTE_BUSY, &chan->conn_state)) {
l2cap_ertm_send(chan);
/* If any i-frames were sent, they included an ack */
if (chan->buffer_seq == chan->last_acked_seq)
frames_to_ack = 0;
}
/* Ack now if the window is 3/4ths full.
* Calculate without mul or div
*/
threshold = chan->ack_win;
threshold += threshold << 1;
threshold >>= 2;
BT_DBG("frames_to_ack %u, threshold %d", frames_to_ack,
threshold);
if (frames_to_ack >= threshold) {
__clear_ack_timer(chan);
control.super = L2CAP_SUPER_RR;
control.reqseq = chan->buffer_seq;
l2cap_send_sframe(chan, &control);
frames_to_ack = 0;
}
if (frames_to_ack)
__set_ack_timer(chan);
}
}
static inline int l2cap_skbuff_fromiovec(struct l2cap_chan *chan,
struct msghdr *msg, int len,
int count, struct sk_buff *skb)
{
struct l2cap_conn *conn = chan->conn;
struct sk_buff **frag;
int sent = 0;
if (!copy_from_iter_full(skb_put(skb, count), count, &msg->msg_iter))
return -EFAULT;
sent += count;
len -= count;
/* Continuation fragments (no L2CAP header) */
frag = &skb_shinfo(skb)->frag_list;
while (len) {
struct sk_buff *tmp;
count = min_t(unsigned int, conn->mtu, len);
tmp = chan->ops->alloc_skb(chan, 0, count,
msg->msg_flags & MSG_DONTWAIT);
if (IS_ERR(tmp))
return PTR_ERR(tmp);
*frag = tmp;
if (!copy_from_iter_full(skb_put(*frag, count), count,
&msg->msg_iter))
return -EFAULT;
sent += count;
len -= count;
skb->len += (*frag)->len;
skb->data_len += (*frag)->len;
frag = &(*frag)->next;
}
return sent;
}
static struct sk_buff *l2cap_create_connless_pdu(struct l2cap_chan *chan,
struct msghdr *msg, size_t len)
{
struct l2cap_conn *conn = chan->conn;
struct sk_buff *skb;
int err, count, hlen = L2CAP_HDR_SIZE + L2CAP_PSMLEN_SIZE;
struct l2cap_hdr *lh;
BT_DBG("chan %p psm 0x%2.2x len %zu", chan,
__le16_to_cpu(chan->psm), len);
count = min_t(unsigned int, (conn->mtu - hlen), len);
skb = chan->ops->alloc_skb(chan, hlen, count,
msg->msg_flags & MSG_DONTWAIT);
if (IS_ERR(skb))
return skb;
/* Create L2CAP header */
lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
lh->cid = cpu_to_le16(chan->dcid);
lh->len = cpu_to_le16(len + L2CAP_PSMLEN_SIZE);
put_unaligned(chan->psm, (__le16 *) skb_put(skb, L2CAP_PSMLEN_SIZE));
err = l2cap_skbuff_fromiovec(chan, msg, len, count, skb);
if (unlikely(err < 0)) {
kfree_skb(skb);
return ERR_PTR(err);
}
return skb;
}
static struct sk_buff *l2cap_create_basic_pdu(struct l2cap_chan *chan,
struct msghdr *msg, size_t len)
{
struct l2cap_conn *conn = chan->conn;
struct sk_buff *skb;
int err, count;
struct l2cap_hdr *lh;
BT_DBG("chan %p len %zu", chan, len);
count = min_t(unsigned int, (conn->mtu - L2CAP_HDR_SIZE), len);
skb = chan->ops->alloc_skb(chan, L2CAP_HDR_SIZE, count,
msg->msg_flags & MSG_DONTWAIT);
if (IS_ERR(skb))
return skb;
/* Create L2CAP header */
lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
lh->cid = cpu_to_le16(chan->dcid);
lh->len = cpu_to_le16(len);
err = l2cap_skbuff_fromiovec(chan, msg, len, count, skb);
if (unlikely(err < 0)) {
kfree_skb(skb);
return ERR_PTR(err);
}
return skb;
}
static struct sk_buff *l2cap_create_iframe_pdu(struct l2cap_chan *chan,
struct msghdr *msg, size_t len,
u16 sdulen)
{
struct l2cap_conn *conn = chan->conn;
struct sk_buff *skb;
int err, count, hlen;
struct l2cap_hdr *lh;
BT_DBG("chan %p len %zu", chan, len);
if (!conn)
return ERR_PTR(-ENOTCONN);
hlen = __ertm_hdr_size(chan);
if (sdulen)
hlen += L2CAP_SDULEN_SIZE;
if (chan->fcs == L2CAP_FCS_CRC16)
hlen += L2CAP_FCS_SIZE;
count = min_t(unsigned int, (conn->mtu - hlen), len);
skb = chan->ops->alloc_skb(chan, hlen, count,
msg->msg_flags & MSG_DONTWAIT);
if (IS_ERR(skb))
return skb;
/* Create L2CAP header */
lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
lh->cid = cpu_to_le16(chan->dcid);
lh->len = cpu_to_le16(len + (hlen - L2CAP_HDR_SIZE));
/* Control header is populated later */
if (test_bit(FLAG_EXT_CTRL, &chan->flags))
put_unaligned_le32(0, skb_put(skb, L2CAP_EXT_CTRL_SIZE));
else
put_unaligned_le16(0, skb_put(skb, L2CAP_ENH_CTRL_SIZE));
if (sdulen)
put_unaligned_le16(sdulen, skb_put(skb, L2CAP_SDULEN_SIZE));
err = l2cap_skbuff_fromiovec(chan, msg, len, count, skb);
if (unlikely(err < 0)) {
kfree_skb(skb);
return ERR_PTR(err);
}
bt_cb(skb)->l2cap.fcs = chan->fcs;
bt_cb(skb)->l2cap.retries = 0;
return skb;
}
static int l2cap_segment_sdu(struct l2cap_chan *chan,
struct sk_buff_head *seg_queue,
struct msghdr *msg, size_t len)
{
struct sk_buff *skb;
u16 sdu_len;
size_t pdu_len;
u8 sar;
BT_DBG("chan %p, msg %p, len %zu", chan, msg, len);
/* It is critical that ERTM PDUs fit in a single HCI fragment,
* so fragmented skbs are not used. The HCI layer's handling
* of fragmented skbs is not compatible with ERTM's queueing.
*/
/* PDU size is derived from the HCI MTU */
pdu_len = chan->conn->mtu;
/* Constrain PDU size for BR/EDR connections */
if (!chan->hs_hcon)
pdu_len = min_t(size_t, pdu_len, L2CAP_BREDR_MAX_PAYLOAD);
/* Adjust for largest possible L2CAP overhead. */
if (chan->fcs)
pdu_len -= L2CAP_FCS_SIZE;
pdu_len -= __ertm_hdr_size(chan);
/* Remote device may have requested smaller PDUs */
pdu_len = min_t(size_t, pdu_len, chan->remote_mps);
if (len <= pdu_len) {
sar = L2CAP_SAR_UNSEGMENTED;
sdu_len = 0;
pdu_len = len;
} else {
sar = L2CAP_SAR_START;
sdu_len = len;
}
while (len > 0) {
skb = l2cap_create_iframe_pdu(chan, msg, pdu_len, sdu_len);
if (IS_ERR(skb)) {
__skb_queue_purge(seg_queue);
return PTR_ERR(skb);
}
bt_cb(skb)->l2cap.sar = sar;
__skb_queue_tail(seg_queue, skb);
len -= pdu_len;
if (sdu_len)
sdu_len = 0;
if (len <= pdu_len) {
sar = L2CAP_SAR_END;
pdu_len = len;
} else {
sar = L2CAP_SAR_CONTINUE;
}
}
return 0;
}
static struct sk_buff *l2cap_create_le_flowctl_pdu(struct l2cap_chan *chan,
struct msghdr *msg,
size_t len, u16 sdulen)
{
struct l2cap_conn *conn = chan->conn;
struct sk_buff *skb;
int err, count, hlen;
struct l2cap_hdr *lh;
BT_DBG("chan %p len %zu", chan, len);
if (!conn)
return ERR_PTR(-ENOTCONN);
hlen = L2CAP_HDR_SIZE;
if (sdulen)
hlen += L2CAP_SDULEN_SIZE;
count = min_t(unsigned int, (conn->mtu - hlen), len);
skb = chan->ops->alloc_skb(chan, hlen, count,
msg->msg_flags & MSG_DONTWAIT);
if (IS_ERR(skb))
return skb;
/* Create L2CAP header */
lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
lh->cid = cpu_to_le16(chan->dcid);
lh->len = cpu_to_le16(len + (hlen - L2CAP_HDR_SIZE));
if (sdulen)
put_unaligned_le16(sdulen, skb_put(skb, L2CAP_SDULEN_SIZE));
err = l2cap_skbuff_fromiovec(chan, msg, len, count, skb);
if (unlikely(err < 0)) {
kfree_skb(skb);
return ERR_PTR(err);
}
return skb;
}
static int l2cap_segment_le_sdu(struct l2cap_chan *chan,
struct sk_buff_head *seg_queue,
struct msghdr *msg, size_t len)
{
struct sk_buff *skb;
size_t pdu_len;
u16 sdu_len;
BT_DBG("chan %p, msg %p, len %zu", chan, msg, len);
sdu_len = len;
pdu_len = chan->remote_mps - L2CAP_SDULEN_SIZE;
while (len > 0) {
if (len <= pdu_len)
pdu_len = len;
skb = l2cap_create_le_flowctl_pdu(chan, msg, pdu_len, sdu_len);
if (IS_ERR(skb)) {
__skb_queue_purge(seg_queue);
return PTR_ERR(skb);
}
__skb_queue_tail(seg_queue, skb);
len -= pdu_len;
if (sdu_len) {
sdu_len = 0;
pdu_len += L2CAP_SDULEN_SIZE;
}
}
return 0;
}
static void l2cap_le_flowctl_send(struct l2cap_chan *chan)
{
int sent = 0;
BT_DBG("chan %p", chan);
while (chan->tx_credits && !skb_queue_empty(&chan->tx_q)) {
l2cap_do_send(chan, skb_dequeue(&chan->tx_q));
chan->tx_credits--;
sent++;
}
BT_DBG("Sent %d credits %u queued %u", sent, chan->tx_credits,
skb_queue_len(&chan->tx_q));
}
int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len)
{
struct sk_buff *skb;
int err;
struct sk_buff_head seg_queue;
Bluetooth: Fix crash in l2cap_chan_send after l2cap_chan_del Removing a bond and disconnecting from a specific remote device can cause l2cap_chan_send() is called after l2cap_chan_del() is called. This causes following crash. [ 1384.972086] Unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 1384.972090] pgd = c0004000 [ 1384.972125] [00000008] *pgd=00000000 [ 1384.972137] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 1384.972144] Modules linked in: [ 1384.972156] CPU: 0 PID: 841 Comm: krfcommd Not tainted 3.10.14-gdf22a71-dirty #435 [ 1384.972162] task: df29a100 ti: df178000 task.ti: df178000 [ 1384.972182] PC is at l2cap_create_basic_pdu+0x30/0x1ac [ 1384.972191] LR is at l2cap_chan_send+0x100/0x1d4 [ 1384.972198] pc : [<c051d250>] lr : [<c0521c78>] psr: 40000113 [ 1384.972198] sp : df179d40 ip : c083a010 fp : 00000008 [ 1384.972202] r10: 00000004 r9 : 0000065a r8 : 000003f5 [ 1384.972206] r7 : 00000000 r6 : 00000000 r5 : df179e84 r4 : da557000 [ 1384.972210] r3 : 00000000 r2 : 00000004 r1 : df179e84 r0 : 00000000 [ 1384.972215] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1384.972220] Control: 10c53c7d Table: 5c8b004a DAC: 00000015 [ 1384.972224] Process krfcommd (pid: 841, stack limit = 0xdf178238) [ 1384.972229] Stack: (0xdf179d40 to 0xdf17a000) [ 1384.972238] 9d40: 00000000 da557000 00000004 df179e84 00000004 000003f5 0000065a 00000000 [ 1384.972245] 9d60: 00000008 c0521c78 df179e84 da557000 00000004 da557204 de0c6800 df179e84 [ 1384.972253] 9d80: da557000 00000004 da557204 c0526b7c 00000004 df724000 df179e84 00000004 [ 1384.972260] 9da0: df179db0 df29a100 c083bc48 c045481c 00000001 00000000 00000000 00000000 [ 1384.972267] 9dc0: 00000000 df29a100 00000000 00000000 00000000 00000000 df179e10 00000000 [ 1384.972274] 9de0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1384.972281] 9e00: 00000000 00000000 00000000 00000000 df179e4c c000ec80 c0b538c0 00000004 [ 1384.972288] 9e20: df724000 df178000 00000000 df179e84 c0b538c0 00000000 df178000 c07f4570 [ 1384.972295] 9e40: dcad9c00 df179e74 c07f4394 df179e60 df178000 00000000 df179e84 de247010 [ 1384.972303] 9e60: 00000043 c0454dec 00000001 00000004 df315c00 c0530598 00000004 df315c0c [ 1384.972310] 9e80: ffffc32c 00000000 00000000 df179ea0 00000001 00000000 00000000 00000000 [ 1384.972317] 9ea0: df179ebc 00000004 df315c00 c05df838 00000000 c0530810 c07d08c0 d7017303 [ 1384.972325] 9ec0: 6ec245b9 00000000 df315c00 c0531b04 c07f3fe0 c07f4018 da67a300 df315c00 [ 1384.972332] 9ee0: 00000000 c05334e0 df315c00 df315b80 df315c00 de0c6800 da67a300 00000000 [ 1384.972339] 9f00: de0c684c c0533674 df204100 df315c00 df315c00 df204100 df315c00 c082b138 [ 1384.972347] 9f20: c053385c c0533754 a0000113 df178000 00000001 c083bc48 00000000 c053385c [ 1384.972354] 9f40: 00000000 00000000 00000000 c05338c4 00000000 df9f0000 df9f5ee4 df179f6c [ 1384.972360] 9f60: df178000 c0049db4 00000000 00000000 c07f3ff8 00000000 00000000 00000000 [ 1384.972368] 9f80: df179f80 df179f80 00000000 00000000 df179f90 df179f90 df9f5ee4 c0049cfc [ 1384.972374] 9fa0: 00000000 00000000 00000000 c000f168 00000000 00000000 00000000 00000000 [ 1384.972381] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1384.972388] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00010000 00000600 [ 1384.972411] [<c051d250>] (l2cap_create_basic_pdu+0x30/0x1ac) from [<c0521c78>] (l2cap_chan_send+0x100/0x1d4) [ 1384.972425] [<c0521c78>] (l2cap_chan_send+0x100/0x1d4) from [<c0526b7c>] (l2cap_sock_sendmsg+0xa8/0x104) [ 1384.972440] [<c0526b7c>] (l2cap_sock_sendmsg+0xa8/0x104) from [<c045481c>] (sock_sendmsg+0xac/0xcc) [ 1384.972453] [<c045481c>] (sock_sendmsg+0xac/0xcc) from [<c0454dec>] (kernel_sendmsg+0x2c/0x34) [ 1384.972469] [<c0454dec>] (kernel_sendmsg+0x2c/0x34) from [<c0530598>] (rfcomm_send_frame+0x58/0x7c) [ 1384.972481] [<c0530598>] (rfcomm_send_frame+0x58/0x7c) from [<c0530810>] (rfcomm_send_ua+0x98/0xbc) [ 1384.972494] [<c0530810>] (rfcomm_send_ua+0x98/0xbc) from [<c0531b04>] (rfcomm_recv_disc+0xac/0x100) [ 1384.972506] [<c0531b04>] (rfcomm_recv_disc+0xac/0x100) from [<c05334e0>] (rfcomm_recv_frame+0x144/0x264) [ 1384.972519] [<c05334e0>] (rfcomm_recv_frame+0x144/0x264) from [<c0533674>] (rfcomm_process_rx+0x74/0xfc) [ 1384.972531] [<c0533674>] (rfcomm_process_rx+0x74/0xfc) from [<c0533754>] (rfcomm_process_sessions+0x58/0x160) [ 1384.972543] [<c0533754>] (rfcomm_process_sessions+0x58/0x160) from [<c05338c4>] (rfcomm_run+0x68/0x110) [ 1384.972558] [<c05338c4>] (rfcomm_run+0x68/0x110) from [<c0049db4>] (kthread+0xb8/0xbc) [ 1384.972576] [<c0049db4>] (kthread+0xb8/0xbc) from [<c000f168>] (ret_from_fork+0x14/0x2c) [ 1384.972586] Code: e3100004 e1a07003 e5946000 1a000057 (e5969008) [ 1384.972614] ---[ end trace 6170b7ce00144e8c ]--- Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-11-05 09:46:33 +00:00
if (!chan->conn)
return -ENOTCONN;
/* Connectionless channel */
if (chan->chan_type == L2CAP_CHAN_CONN_LESS) {
skb = l2cap_create_connless_pdu(chan, msg, len);
if (IS_ERR(skb))
return PTR_ERR(skb);
Bluetooth: Fix NULL pointer dereference when sending data When trying to allocate skb for new PDU, l2cap_chan is unlocked so we can sleep waiting for memory as otherwise there's possible deadlock as fixed in e454c84464. However, in a6a5568c03 lock was moved from socket to channel level and it's no longer safe to just unlock and lock again without checking l2cap_chan state since channel can be disconnected when lock is not held. This patch adds missing checks for l2cap_chan state when returning from call which allocates skb. Scenario is easily reproducible by running rfcomm-tester in a loop. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0442169>] l2cap_do_send+0x29/0x120 [bluetooth] PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 7 PID: 4038 Comm: krfcommd Not tainted 3.14.0-rc2+ #15 Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A10 11/24/2011 task: ffff8802bdd731c0 ti: ffff8801ec986000 task.ti: ffff8801ec986000 RIP: 0010:[<ffffffffa0442169>] [<ffffffffa0442169>] l2cap_do_send+0x29/0x120 RSP: 0018:ffff8801ec987ad8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8800c5796800 RCX: 0000000000000000 RDX: ffff880410e7a800 RSI: ffff8802b6c1da00 RDI: ffff8800c5796800 RBP: ffff8801ec987af8 R08: 00000000000000c0 R09: 0000000000000300 R10: 000000000000573b R11: 000000000000573a R12: ffff8802b6c1da00 R13: 0000000000000000 R14: ffff8802b6c1da00 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000041257c000 CR4: 00000000000407e0 Stack: ffff8801ec987d78 ffff8800c5796800 ffff8801ec987d78 0000000000000000 ffff8801ec987ba8 ffffffffa0449e37 0000000000000004 ffff8801ec987af0 ffff8801ec987d40 0000000000000282 0000000000000000 ffffffff00000004 Call Trace: [<ffffffffa0449e37>] l2cap_chan_send+0xaa7/0x1120 [bluetooth] [<ffffffff81770100>] ? _raw_spin_unlock_bh+0x20/0x40 [<ffffffffa045188b>] l2cap_sock_sendmsg+0xcb/0x110 [bluetooth] [<ffffffff81652b0f>] sock_sendmsg+0xaf/0xc0 [<ffffffff810a8381>] ? update_curr+0x141/0x200 [<ffffffff810a8961>] ? dequeue_entity+0x181/0x520 [<ffffffff81652b60>] kernel_sendmsg+0x40/0x60 [<ffffffffa04a8505>] rfcomm_send_frame+0x45/0x70 [rfcomm] [<ffffffff810766f0>] ? internal_add_timer+0x20/0x50 [<ffffffffa04a8564>] rfcomm_send_cmd+0x34/0x60 [rfcomm] [<ffffffffa04a8605>] rfcomm_send_disc+0x75/0xa0 [rfcomm] [<ffffffffa04aacec>] rfcomm_run+0x8cc/0x1a30 [rfcomm] [<ffffffffa04aa420>] ? rfcomm_check_accept+0xc0/0xc0 [rfcomm] [<ffffffff8108e3a9>] kthread+0xc9/0xe0 [<ffffffff8108e2e0>] ? flush_kthread_worker+0xb0/0xb0 [<ffffffff817795fc>] ret_from_fork+0x7c/0xb0 [<ffffffff8108e2e0>] ? flush_kthread_worker+0xb0/0xb0 Code: 00 00 66 66 66 66 90 55 48 89 e5 48 83 ec 20 f6 05 d6 a3 02 00 04 RIP [<ffffffffa0442169>] l2cap_do_send+0x29/0x120 [bluetooth] RSP <ffff8801ec987ad8> CR2: 0000000000000000 Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-25 16:16:22 +00:00
/* Channel lock is released before requesting new skb and then
* reacquired thus we need to recheck channel state.
*/
if (chan->state != BT_CONNECTED) {
kfree_skb(skb);
return -ENOTCONN;
}
l2cap_do_send(chan, skb);
return len;
}
switch (chan->mode) {
case L2CAP_MODE_LE_FLOWCTL:
/* Check outgoing MTU */
if (len > chan->omtu)
return -EMSGSIZE;
__skb_queue_head_init(&seg_queue);
err = l2cap_segment_le_sdu(chan, &seg_queue, msg, len);
if (chan->state != BT_CONNECTED) {
__skb_queue_purge(&seg_queue);
err = -ENOTCONN;
}
if (err)
return err;
skb_queue_splice_tail_init(&seg_queue, &chan->tx_q);
l2cap_le_flowctl_send(chan);
if (!chan->tx_credits)
chan->ops->suspend(chan);
err = len;
break;
case L2CAP_MODE_BASIC:
/* Check outgoing MTU */
if (len > chan->omtu)
return -EMSGSIZE;
/* Create a basic PDU */
skb = l2cap_create_basic_pdu(chan, msg, len);
if (IS_ERR(skb))
return PTR_ERR(skb);
Bluetooth: Fix NULL pointer dereference when sending data When trying to allocate skb for new PDU, l2cap_chan is unlocked so we can sleep waiting for memory as otherwise there's possible deadlock as fixed in e454c84464. However, in a6a5568c03 lock was moved from socket to channel level and it's no longer safe to just unlock and lock again without checking l2cap_chan state since channel can be disconnected when lock is not held. This patch adds missing checks for l2cap_chan state when returning from call which allocates skb. Scenario is easily reproducible by running rfcomm-tester in a loop. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0442169>] l2cap_do_send+0x29/0x120 [bluetooth] PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 7 PID: 4038 Comm: krfcommd Not tainted 3.14.0-rc2+ #15 Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A10 11/24/2011 task: ffff8802bdd731c0 ti: ffff8801ec986000 task.ti: ffff8801ec986000 RIP: 0010:[<ffffffffa0442169>] [<ffffffffa0442169>] l2cap_do_send+0x29/0x120 RSP: 0018:ffff8801ec987ad8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8800c5796800 RCX: 0000000000000000 RDX: ffff880410e7a800 RSI: ffff8802b6c1da00 RDI: ffff8800c5796800 RBP: ffff8801ec987af8 R08: 00000000000000c0 R09: 0000000000000300 R10: 000000000000573b R11: 000000000000573a R12: ffff8802b6c1da00 R13: 0000000000000000 R14: ffff8802b6c1da00 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000041257c000 CR4: 00000000000407e0 Stack: ffff8801ec987d78 ffff8800c5796800 ffff8801ec987d78 0000000000000000 ffff8801ec987ba8 ffffffffa0449e37 0000000000000004 ffff8801ec987af0 ffff8801ec987d40 0000000000000282 0000000000000000 ffffffff00000004 Call Trace: [<ffffffffa0449e37>] l2cap_chan_send+0xaa7/0x1120 [bluetooth] [<ffffffff81770100>] ? _raw_spin_unlock_bh+0x20/0x40 [<ffffffffa045188b>] l2cap_sock_sendmsg+0xcb/0x110 [bluetooth] [<ffffffff81652b0f>] sock_sendmsg+0xaf/0xc0 [<ffffffff810a8381>] ? update_curr+0x141/0x200 [<ffffffff810a8961>] ? dequeue_entity+0x181/0x520 [<ffffffff81652b60>] kernel_sendmsg+0x40/0x60 [<ffffffffa04a8505>] rfcomm_send_frame+0x45/0x70 [rfcomm] [<ffffffff810766f0>] ? internal_add_timer+0x20/0x50 [<ffffffffa04a8564>] rfcomm_send_cmd+0x34/0x60 [rfcomm] [<ffffffffa04a8605>] rfcomm_send_disc+0x75/0xa0 [rfcomm] [<ffffffffa04aacec>] rfcomm_run+0x8cc/0x1a30 [rfcomm] [<ffffffffa04aa420>] ? rfcomm_check_accept+0xc0/0xc0 [rfcomm] [<ffffffff8108e3a9>] kthread+0xc9/0xe0 [<ffffffff8108e2e0>] ? flush_kthread_worker+0xb0/0xb0 [<ffffffff817795fc>] ret_from_fork+0x7c/0xb0 [<ffffffff8108e2e0>] ? flush_kthread_worker+0xb0/0xb0 Code: 00 00 66 66 66 66 90 55 48 89 e5 48 83 ec 20 f6 05 d6 a3 02 00 04 RIP [<ffffffffa0442169>] l2cap_do_send+0x29/0x120 [bluetooth] RSP <ffff8801ec987ad8> CR2: 0000000000000000 Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-25 16:16:22 +00:00
/* Channel lock is released before requesting new skb and then
* reacquired thus we need to recheck channel state.
*/
if (chan->state != BT_CONNECTED) {
kfree_skb(skb);
return -ENOTCONN;
}
l2cap_do_send(chan, skb);
err = len;
break;
case L2CAP_MODE_ERTM:
case L2CAP_MODE_STREAMING:
/* Check outgoing MTU */
if (len > chan->omtu) {
err = -EMSGSIZE;
break;
}
__skb_queue_head_init(&seg_queue);
/* Do segmentation before calling in to the state machine,
* since it's possible to block while waiting for memory
* allocation.
*/
err = l2cap_segment_sdu(chan, &seg_queue, msg, len);
/* The channel could have been closed while segmenting,
* check that it is still connected.
*/
if (chan->state != BT_CONNECTED) {
__skb_queue_purge(&seg_queue);
err = -ENOTCONN;
}
if (err)
break;
if (chan->mode == L2CAP_MODE_ERTM)
l2cap_tx(chan, NULL, &seg_queue, L2CAP_EV_DATA_REQUEST);
else
l2cap_streaming_send(chan, &seg_queue);
err = len;
/* If the skbs were not queued for sending, they'll still be in
* seg_queue and need to be purged.
*/
__skb_queue_purge(&seg_queue);
break;
default:
BT_DBG("bad state %1.1x", chan->mode);
err = -EBADFD;
}
return err;
}
EXPORT_SYMBOL_GPL(l2cap_chan_send);
static void l2cap_send_srej(struct l2cap_chan *chan, u16 txseq)
{
struct l2cap_ctrl control;
u16 seq;
BT_DBG("chan %p, txseq %u", chan, txseq);
memset(&control, 0, sizeof(control));
control.sframe = 1;
control.super = L2CAP_SUPER_SREJ;
for (seq = chan->expected_tx_seq; seq != txseq;
seq = __next_seq(chan, seq)) {
if (!l2cap_ertm_seq_in_queue(&chan->srej_q, seq)) {
control.reqseq = seq;
l2cap_send_sframe(chan, &control);
l2cap_seq_list_append(&chan->srej_list, seq);
}
}
chan->expected_tx_seq = __next_seq(chan, txseq);
}
static void l2cap_send_srej_tail(struct l2cap_chan *chan)
{
struct l2cap_ctrl control;
BT_DBG("chan %p", chan);
if (chan->srej_list.tail == L2CAP_SEQ_LIST_CLEAR)
return;
memset(&control, 0, sizeof(control));
control.sframe = 1;
control.super = L2CAP_SUPER_SREJ;
control.reqseq = chan->srej_list.tail;
l2cap_send_sframe(chan, &control);
}
static void l2cap_send_srej_list(struct l2cap_chan *chan, u16 txseq)
{
struct l2cap_ctrl control;
u16 initial_head;
u16 seq;
BT_DBG("chan %p, txseq %u", chan, txseq);
memset(&control, 0, sizeof(control));
control.sframe = 1;
control.super = L2CAP_SUPER_SREJ;
/* Capture initial list head to allow only one pass through the list. */
initial_head = chan->srej_list.head;
do {
seq = l2cap_seq_list_pop(&chan->srej_list);
if (seq == txseq || seq == L2CAP_SEQ_LIST_CLEAR)
break;
control.reqseq = seq;
l2cap_send_sframe(chan, &control);
l2cap_seq_list_append(&chan->srej_list, seq);
} while (chan->srej_list.head != initial_head);
}
static void l2cap_process_reqseq(struct l2cap_chan *chan, u16 reqseq)
{
struct sk_buff *acked_skb;
u16 ackseq;
BT_DBG("chan %p, reqseq %u", chan, reqseq);
if (chan->unacked_frames == 0 || reqseq == chan->expected_ack_seq)
return;
BT_DBG("expected_ack_seq %u, unacked_frames %u",
chan->expected_ack_seq, chan->unacked_frames);
for (ackseq = chan->expected_ack_seq; ackseq != reqseq;
ackseq = __next_seq(chan, ackseq)) {
acked_skb = l2cap_ertm_seq_in_queue(&chan->tx_q, ackseq);
if (acked_skb) {
skb_unlink(acked_skb, &chan->tx_q);
kfree_skb(acked_skb);
chan->unacked_frames--;
}
}
chan->expected_ack_seq = reqseq;
if (chan->unacked_frames == 0)
__clear_retrans_timer(chan);
BT_DBG("unacked_frames %u", chan->unacked_frames);
}
static void l2cap_abort_rx_srej_sent(struct l2cap_chan *chan)
{
BT_DBG("chan %p", chan);
chan->expected_tx_seq = chan->buffer_seq;
l2cap_seq_list_clear(&chan->srej_list);
skb_queue_purge(&chan->srej_q);
chan->rx_state = L2CAP_RX_STATE_RECV;
}
static void l2cap_tx_state_xmit(struct l2cap_chan *chan,
struct l2cap_ctrl *control,
struct sk_buff_head *skbs, u8 event)
{
BT_DBG("chan %p, control %p, skbs %p, event %d", chan, control, skbs,
event);
switch (event) {
case L2CAP_EV_DATA_REQUEST:
if (chan->tx_send_head == NULL)
chan->tx_send_head = skb_peek(skbs);
skb_queue_splice_tail_init(skbs, &chan->tx_q);
l2cap_ertm_send(chan);
break;
case L2CAP_EV_LOCAL_BUSY_DETECTED:
BT_DBG("Enter LOCAL_BUSY");
set_bit(CONN_LOCAL_BUSY, &chan->conn_state);
if (chan->rx_state == L2CAP_RX_STATE_SREJ_SENT) {
/* The SREJ_SENT state must be aborted if we are to
* enter the LOCAL_BUSY state.
*/
l2cap_abort_rx_srej_sent(chan);
}
l2cap_send_ack(chan);
break;
case L2CAP_EV_LOCAL_BUSY_CLEAR:
BT_DBG("Exit LOCAL_BUSY");
clear_bit(CONN_LOCAL_BUSY, &chan->conn_state);
if (test_bit(CONN_RNR_SENT, &chan->conn_state)) {
struct l2cap_ctrl local_control;
memset(&local_control, 0, sizeof(local_control));
local_control.sframe = 1;
local_control.super = L2CAP_SUPER_RR;
local_control.poll = 1;
local_control.reqseq = chan->buffer_seq;
l2cap_send_sframe(chan, &local_control);
chan->retry_count = 1;
__set_monitor_timer(chan);
chan->tx_state = L2CAP_TX_STATE_WAIT_F;
}
break;
case L2CAP_EV_RECV_REQSEQ_AND_FBIT:
l2cap_process_reqseq(chan, control->reqseq);
break;
case L2CAP_EV_EXPLICIT_POLL:
l2cap_send_rr_or_rnr(chan, 1);
chan->retry_count = 1;
__set_monitor_timer(chan);
__clear_ack_timer(chan);
chan->tx_state = L2CAP_TX_STATE_WAIT_F;
break;
case L2CAP_EV_RETRANS_TO:
l2cap_send_rr_or_rnr(chan, 1);
chan->retry_count = 1;
__set_monitor_timer(chan);
chan->tx_state = L2CAP_TX_STATE_WAIT_F;
break;
case L2CAP_EV_RECV_FBIT:
/* Nothing to process */
break;
default:
break;
}
}
static void l2cap_tx_state_wait_f(struct l2cap_chan *chan,
struct l2cap_ctrl *control,
struct sk_buff_head *skbs, u8 event)
{
BT_DBG("chan %p, control %p, skbs %p, event %d", chan, control, skbs,
event);
switch (event) {
case L2CAP_EV_DATA_REQUEST:
if (chan->tx_send_head == NULL)
chan->tx_send_head = skb_peek(skbs);
/* Queue data, but don't send. */
skb_queue_splice_tail_init(skbs, &chan->tx_q);
break;
case L2CAP_EV_LOCAL_BUSY_DETECTED:
BT_DBG("Enter LOCAL_BUSY");
set_bit(CONN_LOCAL_BUSY, &chan->conn_state);
if (chan->rx_state == L2CAP_RX_STATE_SREJ_SENT) {
/* The SREJ_SENT state must be aborted if we are to
* enter the LOCAL_BUSY state.
*/
l2cap_abort_rx_srej_sent(chan);
}
l2cap_send_ack(chan);
break;
case L2CAP_EV_LOCAL_BUSY_CLEAR:
BT_DBG("Exit LOCAL_BUSY");
clear_bit(CONN_LOCAL_BUSY, &chan->conn_state);
if (test_bit(CONN_RNR_SENT, &chan->conn_state)) {
struct l2cap_ctrl local_control;
memset(&local_control, 0, sizeof(local_control));
local_control.sframe = 1;
local_control.super = L2CAP_SUPER_RR;
local_control.poll = 1;
local_control.reqseq = chan->buffer_seq;
l2cap_send_sframe(chan, &local_control);
chan->retry_count = 1;
__set_monitor_timer(chan);
chan->tx_state = L2CAP_TX_STATE_WAIT_F;
}
break;
case L2CAP_EV_RECV_REQSEQ_AND_FBIT:
l2cap_process_reqseq(chan, control->reqseq);
/* Fall through */
case L2CAP_EV_RECV_FBIT:
if (control && control->final) {
__clear_monitor_timer(chan);
if (chan->unacked_frames > 0)
__set_retrans_timer(chan);
chan->retry_count = 0;
chan->tx_state = L2CAP_TX_STATE_XMIT;
BT_DBG("recv fbit tx_state 0x2.2%x", chan->tx_state);
}
break;
case L2CAP_EV_EXPLICIT_POLL:
/* Ignore */
break;
case L2CAP_EV_MONITOR_TO:
if (chan->max_tx == 0 || chan->retry_count < chan->max_tx) {
l2cap_send_rr_or_rnr(chan, 1);
__set_monitor_timer(chan);
chan->retry_count++;
} else {
l2cap_send_disconn_req(chan, ECONNABORTED);
}
break;
default:
break;
}
}
static void l2cap_tx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
struct sk_buff_head *skbs, u8 event)
{
BT_DBG("chan %p, control %p, skbs %p, event %d, state %d",
chan, control, skbs, event, chan->tx_state);
switch (chan->tx_state) {
case L2CAP_TX_STATE_XMIT:
l2cap_tx_state_xmit(chan, control, skbs, event);
break;
case L2CAP_TX_STATE_WAIT_F:
l2cap_tx_state_wait_f(chan, control, skbs, event);
break;
default:
/* Ignore event */
break;
}
}
static void l2cap_pass_to_tx(struct l2cap_chan *chan,
struct l2cap_ctrl *control)
{
BT_DBG("chan %p, control %p", chan, control);
l2cap_tx(chan, control, NULL, L2CAP_EV_RECV_REQSEQ_AND_FBIT);
}
static void l2cap_pass_to_tx_fbit(struct l2cap_chan *chan,
struct l2cap_ctrl *control)
{
BT_DBG("chan %p, control %p", chan, control);
l2cap_tx(chan, control, NULL, L2CAP_EV_RECV_FBIT);
}
/* Copy frame to all raw sockets on that connection */
static void l2cap_raw_recv(struct l2cap_conn *conn, struct sk_buff *skb)
{
struct sk_buff *nskb;
struct l2cap_chan *chan;
BT_DBG("conn %p", conn);
mutex_lock(&conn->chan_lock);
list_for_each_entry(chan, &conn->chan_l, list) {
if (chan->chan_type != L2CAP_CHAN_RAW)
continue;
/* Don't send frame to the channel it came from */
if (bt_cb(skb)->l2cap.chan == chan)
continue;
nskb = skb_clone(skb, GFP_KERNEL);
if (!nskb)
continue;
if (chan->ops->recv(chan, nskb))
kfree_skb(nskb);
}
mutex_unlock(&conn->chan_lock);
}
/* ---- L2CAP signalling commands ---- */
static struct sk_buff *l2cap_build_cmd(struct l2cap_conn *conn, u8 code,
u8 ident, u16 dlen, void *data)
{
struct sk_buff *skb, **frag;
struct l2cap_cmd_hdr *cmd;
struct l2cap_hdr *lh;
int len, count;
BT_DBG("conn %p, code 0x%2.2x, ident 0x%2.2x, len %u",
conn, code, ident, dlen);
Bluetooth: Fix crash in l2cap_build_cmd() with small MTU If a too small MTU value is set with ioctl(HCISETACLMTU) or by a bogus controller, memory corruption happens due to a memcpy() call with negative length. Fix this crash on either incoming or outgoing connections with a MTU smaller than L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE: [ 46.885433] BUG: unable to handle kernel paging request at f56ad000 [ 46.888037] IP: [<c03d94cd>] memcpy+0x1d/0x40 [ 46.888037] *pdpt = 0000000000ac3001 *pde = 00000000373f8067 *pte = 80000000356ad060 [ 46.888037] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 46.888037] Modules linked in: hci_vhci bluetooth virtio_balloon i2c_piix4 uhci_hcd usbcore usb_common [ 46.888037] CPU: 0 PID: 1044 Comm: kworker/u3:0 Not tainted 3.10.0-rc1+ #12 [ 46.888037] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 46.888037] Workqueue: hci0 hci_rx_work [bluetooth] [ 46.888037] task: f59b15b0 ti: f55c4000 task.ti: f55c4000 [ 46.888037] EIP: 0060:[<c03d94cd>] EFLAGS: 00010212 CPU: 0 [ 46.888037] EIP is at memcpy+0x1d/0x40 [ 46.888037] EAX: f56ac1c0 EBX: fffffff8 ECX: 3ffffc6e EDX: f55c5cf2 [ 46.888037] ESI: f55c6b32 EDI: f56ad000 EBP: f55c5c68 ESP: f55c5c5c [ 46.888037] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 46.888037] CR0: 8005003b CR2: f56ad000 CR3: 3557d000 CR4: 000006f0 [ 46.888037] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 46.888037] DR6: ffff0ff0 DR7: 00000400 [ 46.888037] Stack: [ 46.888037] fffffff8 00000010 00000003 f55c5cac f8c6a54c ffffffff f8c69eb2 00000000 [ 46.888037] f4783cdc f57f0070 f759c590 1001c580 00000003 0200000a 00000000 f5a88560 [ 46.888037] f5ba2600 f5a88560 00000041 00000000 f55c5d90 f8c6f4c7 00000008 f55c5cf2 [ 46.888037] Call Trace: [ 46.888037] [<f8c6a54c>] l2cap_send_cmd+0x1cc/0x230 [bluetooth] [ 46.888037] [<f8c69eb2>] ? l2cap_global_chan_by_psm+0x152/0x1a0 [bluetooth] [ 46.888037] [<f8c6f4c7>] l2cap_connect+0x3f7/0x540 [bluetooth] [ 46.888037] [<c019b37b>] ? trace_hardirqs_off+0xb/0x10 [ 46.888037] [<c01a0ff8>] ? mark_held_locks+0x68/0x110 [ 46.888037] [<c064ad20>] ? mutex_lock_nested+0x280/0x360 [ 46.888037] [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150 [ 46.888037] [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0 [ 46.888037] [<c064ad08>] ? mutex_lock_nested+0x268/0x360 [ 46.888037] [<c01a125b>] ? trace_hardirqs_on+0xb/0x10 [ 46.888037] [<f8c72f8d>] l2cap_recv_frame+0xb2d/0x1d30 [bluetooth] [ 46.888037] [<c01a0ff8>] ? mark_held_locks+0x68/0x110 [ 46.888037] [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150 [ 46.888037] [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0 [ 46.888037] [<f8c754f1>] l2cap_recv_acldata+0x2a1/0x320 [bluetooth] [ 46.888037] [<f8c491d8>] hci_rx_work+0x518/0x810 [bluetooth] [ 46.888037] [<f8c48df2>] ? hci_rx_work+0x132/0x810 [bluetooth] [ 46.888037] [<c0158979>] process_one_work+0x1a9/0x600 [ 46.888037] [<c01588fb>] ? process_one_work+0x12b/0x600 [ 46.888037] [<c015922e>] ? worker_thread+0x19e/0x320 [ 46.888037] [<c015922e>] ? worker_thread+0x19e/0x320 [ 46.888037] [<c0159187>] worker_thread+0xf7/0x320 [ 46.888037] [<c0159090>] ? rescuer_thread+0x290/0x290 [ 46.888037] [<c01602f8>] kthread+0xa8/0xb0 [ 46.888037] [<c0656777>] ret_from_kernel_thread+0x1b/0x28 [ 46.888037] [<c0160250>] ? flush_kthread_worker+0x120/0x120 [ 46.888037] Code: c3 90 8d 74 26 00 e8 63 fc ff ff eb e8 90 55 89 e5 83 ec 0c 89 5d f4 89 75 f8 89 7d fc 3e 8d 74 26 00 89 cb 89 c7 c1 e9 02 89 d6 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 8b 5d f4 8b 75 f8 8b 7d fc 89 [ 46.888037] EIP: [<c03d94cd>] memcpy+0x1d/0x40 SS:ESP 0068:f55c5c5c [ 46.888037] CR2: 00000000f56ad000 [ 46.888037] ---[ end trace 0217c1f4d78714a9 ]--- Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Cc: stable@vger.kernel.org Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-02 20:30:40 +00:00
if (conn->mtu < L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE)
return NULL;
len = L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE + dlen;
count = min_t(unsigned int, conn->mtu, len);
skb = bt_skb_alloc(count, GFP_KERNEL);
if (!skb)
return NULL;
lh = (struct l2cap_hdr *) skb_put(skb, L2CAP_HDR_SIZE);
lh->len = cpu_to_le16(L2CAP_CMD_HDR_SIZE + dlen);
if (conn->hcon->type == LE_LINK)
lh->cid = cpu_to_le16(L2CAP_CID_LE_SIGNALING);
else
lh->cid = cpu_to_le16(L2CAP_CID_SIGNALING);
cmd = (struct l2cap_cmd_hdr *) skb_put(skb, L2CAP_CMD_HDR_SIZE);
cmd->code = code;
cmd->ident = ident;
cmd->len = cpu_to_le16(dlen);
if (dlen) {
count -= L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE;
memcpy(skb_put(skb, count), data, count);
data += count;
}
len -= skb->len;
/* Continuation fragments (no L2CAP header) */
frag = &skb_shinfo(skb)->frag_list;
while (len) {
count = min_t(unsigned int, conn->mtu, len);
*frag = bt_skb_alloc(count, GFP_KERNEL);
if (!*frag)
goto fail;
memcpy(skb_put(*frag, count), data, count);
len -= count;
data += count;
frag = &(*frag)->next;
}
return skb;
fail:
kfree_skb(skb);
return NULL;
}
static inline int l2cap_get_conf_opt(void **ptr, int *type, int *olen,
unsigned long *val)
{
struct l2cap_conf_opt *opt = *ptr;
int len;
len = L2CAP_CONF_OPT_SIZE + opt->len;
*ptr += len;
*type = opt->type;
*olen = opt->len;
switch (opt->len) {
case 1:
*val = *((u8 *) opt->val);
break;
case 2:
*val = get_unaligned_le16(opt->val);
break;
case 4:
*val = get_unaligned_le32(opt->val);
break;
default:
*val = (unsigned long) opt->val;
break;
}
BT_DBG("type 0x%2.2x len %u val 0x%lx", *type, opt->len, *val);
return len;
}
static void l2cap_add_conf_opt(void **ptr, u8 type, u8 len, unsigned long val)
{
struct l2cap_conf_opt *opt = *ptr;
BT_DBG("type 0x%2.2x len %u val 0x%lx", type, len, val);
opt->type = type;
opt->len = len;
switch (len) {
case 1:
*((u8 *) opt->val) = val;
break;
case 2:
put_unaligned_le16(val, opt->val);
break;
case 4:
put_unaligned_le32(val, opt->val);
break;
default:
memcpy(opt->val, (void *) val, len);
break;
}
*ptr += L2CAP_CONF_OPT_SIZE + len;
}
static void l2cap_add_opt_efs(void **ptr, struct l2cap_chan *chan)
{
struct l2cap_conf_efs efs;
switch (chan->mode) {
case L2CAP_MODE_ERTM:
efs.id = chan->local_id;
efs.stype = chan->local_stype;
efs.msdu = cpu_to_le16(chan->local_msdu);
efs.sdu_itime = cpu_to_le32(chan->local_sdu_itime);
efs.acc_lat = cpu_to_le32(L2CAP_DEFAULT_ACC_LAT);
efs.flush_to = cpu_to_le32(L2CAP_EFS_DEFAULT_FLUSH_TO);
break;
case L2CAP_MODE_STREAMING:
efs.id = 1;
efs.stype = L2CAP_SERV_BESTEFFORT;
efs.msdu = cpu_to_le16(chan->local_msdu);
efs.sdu_itime = cpu_to_le32(chan->local_sdu_itime);
efs.acc_lat = 0;
efs.flush_to = 0;
break;
default:
return;
}
l2cap_add_conf_opt(ptr, L2CAP_CONF_EFS, sizeof(efs),
(unsigned long) &efs);
}
static void l2cap_ack_timeout(struct work_struct *work)
{
struct l2cap_chan *chan = container_of(work, struct l2cap_chan,
ack_timer.work);
u16 frames_to_ack;
BT_DBG("chan %p", chan);
l2cap_chan_lock(chan);
frames_to_ack = __seq_offset(chan, chan->buffer_seq,
chan->last_acked_seq);
if (frames_to_ack)
l2cap_send_rr_or_rnr(chan, 0);
l2cap_chan_unlock(chan);
l2cap_chan_put(chan);
}
int l2cap_ertm_init(struct l2cap_chan *chan)
{
int err;
chan->next_tx_seq = 0;
chan->expected_tx_seq = 0;
chan->expected_ack_seq = 0;
chan->unacked_frames = 0;
chan->buffer_seq = 0;
chan->frames_sent = 0;
chan->last_acked_seq = 0;
chan->sdu = NULL;
chan->sdu_last_frag = NULL;
chan->sdu_len = 0;
skb_queue_head_init(&chan->tx_q);
chan->local_amp_id = AMP_ID_BREDR;
chan->move_id = AMP_ID_BREDR;
chan->move_state = L2CAP_MOVE_STABLE;
chan->move_role = L2CAP_MOVE_ROLE_NONE;
if (chan->mode != L2CAP_MODE_ERTM)
return 0;
chan->rx_state = L2CAP_RX_STATE_RECV;
chan->tx_state = L2CAP_TX_STATE_XMIT;
INIT_DELAYED_WORK(&chan->retrans_timer, l2cap_retrans_timeout);
INIT_DELAYED_WORK(&chan->monitor_timer, l2cap_monitor_timeout);
INIT_DELAYED_WORK(&chan->ack_timer, l2cap_ack_timeout);
skb_queue_head_init(&chan->srej_q);
err = l2cap_seq_list_init(&chan->srej_list, chan->tx_win);
if (err < 0)
return err;
err = l2cap_seq_list_init(&chan->retrans_list, chan->remote_tx_win);
if (err < 0)
l2cap_seq_list_free(&chan->srej_list);
return err;
}
static inline __u8 l2cap_select_mode(__u8 mode, __u16 remote_feat_mask)
{
switch (mode) {
case L2CAP_MODE_STREAMING:
case L2CAP_MODE_ERTM:
if (l2cap_mode_supported(mode, remote_feat_mask))
return mode;
/* fall through */
default:
return L2CAP_MODE_BASIC;
}
}
static inline bool __l2cap_ews_supported(struct l2cap_conn *conn)
{
return ((conn->local_fixed_chan & L2CAP_FC_A2MP) &&
(conn->feat_mask & L2CAP_FEAT_EXT_WINDOW));
}
static inline bool __l2cap_efs_supported(struct l2cap_conn *conn)
{
return ((conn->local_fixed_chan & L2CAP_FC_A2MP) &&
(conn->feat_mask & L2CAP_FEAT_EXT_FLOW));
}
static void __l2cap_set_ertm_timeouts(struct l2cap_chan *chan,
struct l2cap_conf_rfc *rfc)
{
if (chan->local_amp_id != AMP_ID_BREDR && chan->hs_hcon) {
u64 ertm_to = chan->hs_hcon->hdev->amp_be_flush_to;
/* Class 1 devices have must have ERTM timeouts
* exceeding the Link Supervision Timeout. The
* default Link Supervision Timeout for AMP
* controllers is 10 seconds.
*
* Class 1 devices use 0xffffffff for their
* best-effort flush timeout, so the clamping logic
* will result in a timeout that meets the above
* requirement. ERTM timeouts are 16-bit values, so
* the maximum timeout is 65.535 seconds.
*/
/* Convert timeout to milliseconds and round */
ertm_to = DIV_ROUND_UP_ULL(ertm_to, 1000);
/* This is the recommended formula for class 2 devices
* that start ERTM timers when packets are sent to the
* controller.
*/
ertm_to = 3 * ertm_to + 500;
if (ertm_to > 0xffff)
ertm_to = 0xffff;
rfc->retrans_timeout = cpu_to_le16((u16) ertm_to);
rfc->monitor_timeout = rfc->retrans_timeout;
} else {
rfc->retrans_timeout = cpu_to_le16(L2CAP_DEFAULT_RETRANS_TO);
rfc->monitor_timeout = cpu_to_le16(L2CAP_DEFAULT_MONITOR_TO);
}
}
static inline void l2cap_txwin_setup(struct l2cap_chan *chan)
{
if (chan->tx_win > L2CAP_DEFAULT_TX_WINDOW &&
__l2cap_ews_supported(chan->conn)) {
/* use extended control field */
set_bit(FLAG_EXT_CTRL, &chan->flags);
chan->tx_win_max = L2CAP_DEFAULT_EXT_WINDOW;
} else {
chan->tx_win = min_t(u16, chan->tx_win,
L2CAP_DEFAULT_TX_WINDOW);
chan->tx_win_max = L2CAP_DEFAULT_TX_WINDOW;
}
chan->ack_win = chan->tx_win;
}
static int l2cap_build_conf_req(struct l2cap_chan *chan, void *data)
{
struct l2cap_conf_req *req = data;
struct l2cap_conf_rfc rfc = { .mode = chan->mode };
void *ptr = req->data;
u16 size;
BT_DBG("chan %p", chan);
if (chan->num_conf_req || chan->num_conf_rsp)
goto done;
switch (chan->mode) {
case L2CAP_MODE_STREAMING:
case L2CAP_MODE_ERTM:
if (test_bit(CONF_STATE2_DEVICE, &chan->conf_state))
break;
if (__l2cap_efs_supported(chan->conn))
set_bit(FLAG_EFS_ENABLE, &chan->flags);
/* fall through */
default:
chan->mode = l2cap_select_mode(rfc.mode, chan->conn->feat_mask);
break;
}
done:
if (chan->imtu != L2CAP_DEFAULT_MTU)
l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, chan->imtu);
switch (chan->mode) {
case L2CAP_MODE_BASIC:
if (disable_ertm)
break;
if (!(chan->conn->feat_mask & L2CAP_FEAT_ERTM) &&
!(chan->conn->feat_mask & L2CAP_FEAT_STREAMING))
break;
rfc.mode = L2CAP_MODE_BASIC;
rfc.txwin_size = 0;
rfc.max_transmit = 0;
rfc.retrans_timeout = 0;
rfc.monitor_timeout = 0;
rfc.max_pdu_size = 0;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
(unsigned long) &rfc);
break;
case L2CAP_MODE_ERTM:
rfc.mode = L2CAP_MODE_ERTM;
rfc.max_transmit = chan->max_tx;
__l2cap_set_ertm_timeouts(chan, &rfc);
size = min_t(u16, L2CAP_DEFAULT_MAX_PDU_SIZE, chan->conn->mtu -
L2CAP_EXT_HDR_SIZE - L2CAP_SDULEN_SIZE -
L2CAP_FCS_SIZE);
rfc.max_pdu_size = cpu_to_le16(size);
l2cap_txwin_setup(chan);
rfc.txwin_size = min_t(u16, chan->tx_win,
L2CAP_DEFAULT_TX_WINDOW);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
(unsigned long) &rfc);
if (test_bit(FLAG_EFS_ENABLE, &chan->flags))
l2cap_add_opt_efs(&ptr, chan);
if (test_bit(FLAG_EXT_CTRL, &chan->flags))
l2cap_add_conf_opt(&ptr, L2CAP_CONF_EWS, 2,
chan->tx_win);
if (chan->conn->feat_mask & L2CAP_FEAT_FCS)
if (chan->fcs == L2CAP_FCS_NONE ||
test_bit(CONF_RECV_NO_FCS, &chan->conf_state)) {
chan->fcs = L2CAP_FCS_NONE;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_FCS, 1,
chan->fcs);
}
break;
case L2CAP_MODE_STREAMING:
l2cap_txwin_setup(chan);
rfc.mode = L2CAP_MODE_STREAMING;
rfc.txwin_size = 0;
rfc.max_transmit = 0;
rfc.retrans_timeout = 0;
rfc.monitor_timeout = 0;
size = min_t(u16, L2CAP_DEFAULT_MAX_PDU_SIZE, chan->conn->mtu -
L2CAP_EXT_HDR_SIZE - L2CAP_SDULEN_SIZE -
L2CAP_FCS_SIZE);
rfc.max_pdu_size = cpu_to_le16(size);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
(unsigned long) &rfc);
if (test_bit(FLAG_EFS_ENABLE, &chan->flags))
l2cap_add_opt_efs(&ptr, chan);
if (chan->conn->feat_mask & L2CAP_FEAT_FCS)
if (chan->fcs == L2CAP_FCS_NONE ||
test_bit(CONF_RECV_NO_FCS, &chan->conf_state)) {
chan->fcs = L2CAP_FCS_NONE;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_FCS, 1,
chan->fcs);
}
break;
}
req->dcid = cpu_to_le16(chan->dcid);
req->flags = cpu_to_le16(0);
return ptr - data;
}
static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data)
{
struct l2cap_conf_rsp *rsp = data;
void *ptr = rsp->data;
void *req = chan->conf_req;
int len = chan->conf_len;
int type, hint, olen;
unsigned long val;
struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC };
struct l2cap_conf_efs efs;
u8 remote_efs = 0;
u16 mtu = L2CAP_DEFAULT_MTU;
u16 result = L2CAP_CONF_SUCCESS;
u16 size;
BT_DBG("chan %p", chan);
while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&req, &type, &olen, &val);
hint = type & L2CAP_CONF_HINT;
type &= L2CAP_CONF_MASK;
switch (type) {
case L2CAP_CONF_MTU:
mtu = val;
break;
case L2CAP_CONF_FLUSH_TO:
chan->flush_to = val;
break;
case L2CAP_CONF_QOS:
break;
case L2CAP_CONF_RFC:
if (olen == sizeof(rfc))
memcpy(&rfc, (void *) val, olen);
break;
case L2CAP_CONF_FCS:
if (val == L2CAP_FCS_NONE)
set_bit(CONF_RECV_NO_FCS, &chan->conf_state);
break;
case L2CAP_CONF_EFS:
remote_efs = 1;
if (olen == sizeof(efs))
memcpy(&efs, (void *) val, olen);
break;
case L2CAP_CONF_EWS:
if (!(chan->conn->local_fixed_chan & L2CAP_FC_A2MP))
return -ECONNREFUSED;
set_bit(FLAG_EXT_CTRL, &chan->flags);
set_bit(CONF_EWS_RECV, &chan->conf_state);
chan->tx_win_max = L2CAP_DEFAULT_EXT_WINDOW;
chan->remote_tx_win = val;
break;
default:
if (hint)
break;
result = L2CAP_CONF_UNKNOWN;
*((u8 *) ptr++) = type;
break;
}
}
if (chan->num_conf_rsp || chan->num_conf_req > 1)
goto done;
switch (chan->mode) {
case L2CAP_MODE_STREAMING:
case L2CAP_MODE_ERTM:
if (!test_bit(CONF_STATE2_DEVICE, &chan->conf_state)) {
chan->mode = l2cap_select_mode(rfc.mode,
chan->conn->feat_mask);
break;
}
if (remote_efs) {
if (__l2cap_efs_supported(chan->conn))
set_bit(FLAG_EFS_ENABLE, &chan->flags);
else
return -ECONNREFUSED;
}
if (chan->mode != rfc.mode)
return -ECONNREFUSED;
break;
}
done:
if (chan->mode != rfc.mode) {
result = L2CAP_CONF_UNACCEPT;
rfc.mode = chan->mode;
if (chan->num_conf_rsp == 1)
return -ECONNREFUSED;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
(unsigned long) &rfc);
}
if (result == L2CAP_CONF_SUCCESS) {
/* Configure output options and let the other side know
* which ones we don't like. */
if (mtu < L2CAP_DEFAULT_MIN_MTU)
result = L2CAP_CONF_UNACCEPT;
else {
chan->omtu = mtu;
set_bit(CONF_MTU_DONE, &chan->conf_state);
}
l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, chan->omtu);
if (remote_efs) {
if (chan->local_stype != L2CAP_SERV_NOTRAFIC &&
efs.stype != L2CAP_SERV_NOTRAFIC &&
efs.stype != chan->local_stype) {
result = L2CAP_CONF_UNACCEPT;
if (chan->num_conf_req >= 1)
return -ECONNREFUSED;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS,
sizeof(efs),
(unsigned long) &efs);
Bluetooth: EFS: implement L2CAP config pending state Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17 11:35:32 +00:00
} else {
/* Send PENDING Conf Rsp */
Bluetooth: EFS: implement L2CAP config pending state Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17 11:35:32 +00:00
result = L2CAP_CONF_PENDING;
set_bit(CONF_LOC_CONF_PEND, &chan->conf_state);
}
}
switch (rfc.mode) {
case L2CAP_MODE_BASIC:
chan->fcs = L2CAP_FCS_NONE;
set_bit(CONF_MODE_DONE, &chan->conf_state);
break;
case L2CAP_MODE_ERTM:
if (!test_bit(CONF_EWS_RECV, &chan->conf_state))
chan->remote_tx_win = rfc.txwin_size;
else
rfc.txwin_size = L2CAP_DEFAULT_TX_WINDOW;
chan->remote_max_tx = rfc.max_transmit;
size = min_t(u16, le16_to_cpu(rfc.max_pdu_size),
chan->conn->mtu - L2CAP_EXT_HDR_SIZE -
L2CAP_SDULEN_SIZE - L2CAP_FCS_SIZE);
rfc.max_pdu_size = cpu_to_le16(size);
chan->remote_mps = size;
__l2cap_set_ertm_timeouts(chan, &rfc);
set_bit(CONF_MODE_DONE, &chan->conf_state);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
sizeof(rfc), (unsigned long) &rfc);
if (test_bit(FLAG_EFS_ENABLE, &chan->flags)) {
chan->remote_id = efs.id;
chan->remote_stype = efs.stype;
chan->remote_msdu = le16_to_cpu(efs.msdu);
chan->remote_flush_to =
le32_to_cpu(efs.flush_to);
chan->remote_acc_lat =
le32_to_cpu(efs.acc_lat);
chan->remote_sdu_itime =
le32_to_cpu(efs.sdu_itime);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS,
sizeof(efs),
(unsigned long) &efs);
}
break;
case L2CAP_MODE_STREAMING:
size = min_t(u16, le16_to_cpu(rfc.max_pdu_size),
chan->conn->mtu - L2CAP_EXT_HDR_SIZE -
L2CAP_SDULEN_SIZE - L2CAP_FCS_SIZE);
rfc.max_pdu_size = cpu_to_le16(size);
chan->remote_mps = size;
set_bit(CONF_MODE_DONE, &chan->conf_state);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
(unsigned long) &rfc);
break;
default:
result = L2CAP_CONF_UNACCEPT;
memset(&rfc, 0, sizeof(rfc));
rfc.mode = chan->mode;
}
if (result == L2CAP_CONF_SUCCESS)
set_bit(CONF_OUTPUT_DONE, &chan->conf_state);
}
rsp->scid = cpu_to_le16(chan->dcid);
rsp->result = cpu_to_le16(result);
rsp->flags = cpu_to_le16(0);
return ptr - data;
}
static int l2cap_parse_conf_rsp(struct l2cap_chan *chan, void *rsp, int len,
void *data, u16 *result)
{
struct l2cap_conf_req *req = data;
void *ptr = req->data;
int type, olen;
unsigned long val;
struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC };
struct l2cap_conf_efs efs;
BT_DBG("chan %p, rsp %p, len %d, req %p", chan, rsp, len, data);
while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
switch (type) {
case L2CAP_CONF_MTU:
if (val < L2CAP_DEFAULT_MIN_MTU) {
*result = L2CAP_CONF_UNACCEPT;
chan->imtu = L2CAP_DEFAULT_MIN_MTU;
} else
chan->imtu = val;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, chan->imtu);
break;
case L2CAP_CONF_FLUSH_TO:
chan->flush_to = val;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_FLUSH_TO,
2, chan->flush_to);
break;
case L2CAP_CONF_RFC:
if (olen == sizeof(rfc))
memcpy(&rfc, (void *)val, olen);
if (test_bit(CONF_STATE2_DEVICE, &chan->conf_state) &&
rfc.mode != chan->mode)
return -ECONNREFUSED;
chan->fcs = 0;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
sizeof(rfc), (unsigned long) &rfc);
break;
case L2CAP_CONF_EWS:
chan->ack_win = min_t(u16, val, chan->ack_win);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_EWS, 2,
chan->tx_win);
break;
case L2CAP_CONF_EFS:
if (olen == sizeof(efs))
memcpy(&efs, (void *)val, olen);
if (chan->local_stype != L2CAP_SERV_NOTRAFIC &&
efs.stype != L2CAP_SERV_NOTRAFIC &&
efs.stype != chan->local_stype)
return -ECONNREFUSED;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS, sizeof(efs),
(unsigned long) &efs);
break;
case L2CAP_CONF_FCS:
if (*result == L2CAP_CONF_PENDING)
if (val == L2CAP_FCS_NONE)
set_bit(CONF_RECV_NO_FCS,
&chan->conf_state);
break;
}
}
if (chan->mode == L2CAP_MODE_BASIC && chan->mode != rfc.mode)
return -ECONNREFUSED;
chan->mode = rfc.mode;
Bluetooth: EFS: implement L2CAP config pending state Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17 11:35:32 +00:00
if (*result == L2CAP_CONF_SUCCESS || *result == L2CAP_CONF_PENDING) {
switch (rfc.mode) {
case L2CAP_MODE_ERTM:
chan->retrans_timeout = le16_to_cpu(rfc.retrans_timeout);
chan->monitor_timeout = le16_to_cpu(rfc.monitor_timeout);
chan->mps = le16_to_cpu(rfc.max_pdu_size);
if (!test_bit(FLAG_EXT_CTRL, &chan->flags))
chan->ack_win = min_t(u16, chan->ack_win,
rfc.txwin_size);
if (test_bit(FLAG_EFS_ENABLE, &chan->flags)) {
chan->local_msdu = le16_to_cpu(efs.msdu);
chan->local_sdu_itime =
le32_to_cpu(efs.sdu_itime);
chan->local_acc_lat = le32_to_cpu(efs.acc_lat);
chan->local_flush_to =
le32_to_cpu(efs.flush_to);
}
break;
case L2CAP_MODE_STREAMING:
chan->mps = le16_to_cpu(rfc.max_pdu_size);
}
}
req->dcid = cpu_to_le16(chan->dcid);
req->flags = cpu_to_le16(0);
return ptr - data;
}
static int l2cap_build_conf_rsp(struct l2cap_chan *chan, void *data,
u16 result, u16 flags)
{
struct l2cap_conf_rsp *rsp = data;
void *ptr = rsp->data;
BT_DBG("chan %p", chan);
rsp->scid = cpu_to_le16(chan->dcid);
rsp->result = cpu_to_le16(result);
rsp->flags = cpu_to_le16(flags);
return ptr - data;
}
void __l2cap_le_connect_rsp_defer(struct l2cap_chan *chan)
{
struct l2cap_le_conn_rsp rsp;
struct l2cap_conn *conn = chan->conn;
BT_DBG("chan %p", chan);
rsp.dcid = cpu_to_le16(chan->scid);
rsp.mtu = cpu_to_le16(chan->imtu);
rsp.mps = cpu_to_le16(chan->mps);
rsp.credits = cpu_to_le16(chan->rx_credits);
rsp.result = cpu_to_le16(L2CAP_CR_SUCCESS);
l2cap_send_cmd(conn, chan->ident, L2CAP_LE_CONN_RSP, sizeof(rsp),
&rsp);
}
void __l2cap_connect_rsp_defer(struct l2cap_chan *chan)
{
struct l2cap_conn_rsp rsp;
struct l2cap_conn *conn = chan->conn;
u8 buf[128];
u8 rsp_code;
rsp.scid = cpu_to_le16(chan->dcid);
rsp.dcid = cpu_to_le16(chan->scid);
rsp.result = cpu_to_le16(L2CAP_CR_SUCCESS);
rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
if (chan->hs_hcon)
rsp_code = L2CAP_CREATE_CHAN_RSP;
else
rsp_code = L2CAP_CONN_RSP;
BT_DBG("chan %p rsp_code %u", chan, rsp_code);
l2cap_send_cmd(conn, chan->ident, rsp_code, sizeof(rsp), &rsp);
if (test_and_set_bit(CONF_REQ_SENT, &chan->conf_state))
return;
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
l2cap_build_conf_req(chan, buf), buf);
chan->num_conf_req++;
}
static void l2cap_conf_rfc_get(struct l2cap_chan *chan, void *rsp, int len)
{
int type, olen;
unsigned long val;
/* Use sane default values in case a misbehaving remote device
* did not send an RFC or extended window size option.
*/
u16 txwin_ext = chan->ack_win;
struct l2cap_conf_rfc rfc = {
.mode = chan->mode,
.retrans_timeout = cpu_to_le16(L2CAP_DEFAULT_RETRANS_TO),
.monitor_timeout = cpu_to_le16(L2CAP_DEFAULT_MONITOR_TO),
.max_pdu_size = cpu_to_le16(chan->imtu),
.txwin_size = min_t(u16, chan->ack_win, L2CAP_DEFAULT_TX_WINDOW),
};
BT_DBG("chan %p, rsp %p, len %d", chan, rsp, len);
if ((chan->mode != L2CAP_MODE_ERTM) && (chan->mode != L2CAP_MODE_STREAMING))
return;
while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
switch (type) {
case L2CAP_CONF_RFC:
if (olen == sizeof(rfc))
memcpy(&rfc, (void *)val, olen);
break;
case L2CAP_CONF_EWS:
txwin_ext = val;
break;
}
}
switch (rfc.mode) {
case L2CAP_MODE_ERTM:
chan->retrans_timeout = le16_to_cpu(rfc.retrans_timeout);
chan->monitor_timeout = le16_to_cpu(rfc.monitor_timeout);
chan->mps = le16_to_cpu(rfc.max_pdu_size);
if (test_bit(FLAG_EXT_CTRL, &chan->flags))
chan->ack_win = min_t(u16, chan->ack_win, txwin_ext);
else
chan->ack_win = min_t(u16, chan->ack_win,
rfc.txwin_size);
break;
case L2CAP_MODE_STREAMING:
chan->mps = le16_to_cpu(rfc.max_pdu_size);
}
}
static inline int l2cap_command_rej(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_cmd_rej_unk *rej = (struct l2cap_cmd_rej_unk *) data;
if (cmd_len < sizeof(*rej))
return -EPROTO;
if (rej->reason != L2CAP_REJ_NOT_UNDERSTOOD)
return 0;
if ((conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT) &&
cmd->ident == conn->info_ident) {
cancel_delayed_work(&conn->info_timer);
conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
conn->info_ident = 0;
l2cap_conn_start(conn);
}
return 0;
}
static struct l2cap_chan *l2cap_connect(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd,
u8 *data, u8 rsp_code, u8 amp_id)
{
struct l2cap_conn_req *req = (struct l2cap_conn_req *) data;
struct l2cap_conn_rsp rsp;
struct l2cap_chan *chan = NULL, *pchan;
int result, status = L2CAP_CS_NO_INFO;
u16 dcid = 0, scid = __le16_to_cpu(req->scid);
__le16 psm = req->psm;
BT_DBG("psm 0x%2.2x scid 0x%4.4x", __le16_to_cpu(psm), scid);
/* Check if we have socket listening on psm */
pchan = l2cap_global_chan_by_psm(BT_LISTEN, psm, &conn->hcon->src,
&conn->hcon->dst, ACL_LINK);
if (!pchan) {
result = L2CAP_CR_BAD_PSM;
goto sendresp;
}
mutex_lock(&conn->chan_lock);
l2cap_chan_lock(pchan);
/* Check if the ACL is secure enough (if not SDP) */
if (psm != cpu_to_le16(L2CAP_PSM_SDP) &&
!hci_conn_check_link_mode(conn->hcon)) {
conn->disc_reason = HCI_ERROR_AUTH_FAILURE;
result = L2CAP_CR_SEC_BLOCK;
goto response;
}
result = L2CAP_CR_NO_MEM;
/* Check if we already have channel with that dcid */
if (__l2cap_get_chan_by_dcid(conn, scid))
goto response;
chan = pchan->ops->new_connection(pchan);
if (!chan)
goto response;
Bluetooth: Fix ACL alive for long in case of non pariable devices For certain devices (ex: HID mouse), support for authentication, pairing and bonding is optional. For such devices, the ACL alive for too long after the L2CAP disconnection. To avoid the ACL alive for too long after L2CAP disconnection, reset the ACL disconnect timeout back to HCI_DISCONN_TIMEOUT during L2CAP connect. While merging the commit id:a9ea3ed9b71cc3271dd59e76f65748adcaa76422 this issue might have introduced. Hcidump info: sh-4.1# /opt/hcidump -Xt 2013-08-05 16:49:00.894129 < ACL data: handle 12 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004a scid 0x0041 2013-08-05 16:49:00.894195 < HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2 handle 12 2013-08-05 16:49:00.894269 < ACL data: handle 12 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x0049 scid 0x0040 2013-08-05 16:49:00.895645 > HCI Event: Command Status (0x0f) plen 4 Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1 2013-08-05 16:49:00.934391 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:49:00.936592 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 2013-08-05 16:49:00.951577 > ACL data: handle 12 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004a scid 0x0041 2013-08-05 16:49:00.952820 > ACL data: handle 12 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0049 scid 0x0040 2013-08-05 16:49:00.969165 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x02 interval 50 Mode: Sniff 2013-08-05 16:49:48.175533 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:49:48.219045 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x02 interval 108 Mode: Sniff 2013-08-05 16:51:00.968209 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 12 reason 0x13 Reason: Remote User Terminated Connection 2013-08-05 16:51:00.969056 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2013-08-05 16:51:01.013495 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active 2013-08-05 16:51:01.073777 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 12 reason 0x16 Reason: Connection Terminated by Local Host ============================ After fix ================================ 2013-08-05 16:57:35.986648 < ACL data: handle 11 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004c scid 0x0041 2013-08-05 16:57:35.986713 < HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2 handle 11 2013-08-05 16:57:35.986785 < ACL data: handle 11 flags 0x00 dlen 12 L2CAP(s): Disconn req: dcid 0x004b scid 0x0040 2013-08-05 16:57:35.988110 > HCI Event: Command Status (0x0f) plen 4 Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1 2013-08-05 16:57:36.030714 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x00 interval 0 Mode: Active 2013-08-05 16:57:36.032950 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 11 packets 2 2013-08-05 16:57:36.047926 > ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004c scid 0x0041 2013-08-05 16:57:36.049200 > ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x004b scid 0x0040 2013-08-05 16:57:36.065509 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x02 interval 50 Mode: Sniff 2013-08-05 16:57:40.052006 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 11 reason 0x13 Reason: Remote User Terminated Connection 2013-08-05 16:57:40.052869 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2013-08-05 16:57:40.104731 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 11 mode 0x00 interval 0 Mode: Active 2013-08-05 16:57:40.146935 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 11 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Sang-Ki Park <sangki79.park@samsung.com> Signed-off-by: Chan-yeol Park <chanyeol.park@samsung.com> Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-08-05 16:59:12 +00:00
/* For certain devices (ex: HID mouse), support for authentication,
* pairing and bonding is optional. For such devices, inorder to avoid
* the ACL alive for too long after L2CAP disconnection, reset the ACL
* disc_timeout back to HCI_DISCONN_TIMEOUT during L2CAP connect.
*/
conn->hcon->disc_timeout = HCI_DISCONN_TIMEOUT;
bacpy(&chan->src, &conn->hcon->src);
bacpy(&chan->dst, &conn->hcon->dst);
chan->src_type = bdaddr_src_type(conn->hcon);
chan->dst_type = bdaddr_dst_type(conn->hcon);
chan->psm = psm;
chan->dcid = scid;
chan->local_amp_id = amp_id;
__l2cap_chan_add(conn, chan);
dcid = chan->scid;
__set_chan_timer(chan, chan->ops->get_sndtimeo(chan));
chan->ident = cmd->ident;
if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE) {
if (l2cap_chan_check_security(chan, false)) {
if (test_bit(FLAG_DEFER_SETUP, &chan->flags)) {
l2cap_state_change(chan, BT_CONNECT2);
result = L2CAP_CR_PEND;
status = L2CAP_CS_AUTHOR_PEND;
chan->ops->defer(chan);
} else {
/* Force pending result for AMP controllers.
* The connection will succeed after the
* physical link is up.
*/
if (amp_id == AMP_ID_BREDR) {
l2cap_state_change(chan, BT_CONFIG);
result = L2CAP_CR_SUCCESS;
} else {
l2cap_state_change(chan, BT_CONNECT2);
result = L2CAP_CR_PEND;
}
status = L2CAP_CS_NO_INFO;
}
} else {
l2cap_state_change(chan, BT_CONNECT2);
result = L2CAP_CR_PEND;
status = L2CAP_CS_AUTHEN_PEND;
}
} else {
l2cap_state_change(chan, BT_CONNECT2);
result = L2CAP_CR_PEND;
status = L2CAP_CS_NO_INFO;
}
response:
l2cap_chan_unlock(pchan);
mutex_unlock(&conn->chan_lock);
l2cap_chan_put(pchan);
sendresp:
rsp.scid = cpu_to_le16(scid);
rsp.dcid = cpu_to_le16(dcid);
rsp.result = cpu_to_le16(result);
rsp.status = cpu_to_le16(status);
l2cap_send_cmd(conn, cmd->ident, rsp_code, sizeof(rsp), &rsp);
if (result == L2CAP_CR_PEND && status == L2CAP_CS_NO_INFO) {
struct l2cap_info_req info;
info.type = cpu_to_le16(L2CAP_IT_FEAT_MASK);
conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_SENT;
conn->info_ident = l2cap_get_ident(conn);
schedule_delayed_work(&conn->info_timer, L2CAP_INFO_TIMEOUT);
l2cap_send_cmd(conn, conn->info_ident, L2CAP_INFO_REQ,
sizeof(info), &info);
}
if (chan && !test_bit(CONF_REQ_SENT, &chan->conf_state) &&
result == L2CAP_CR_SUCCESS) {
u8 buf[128];
set_bit(CONF_REQ_SENT, &chan->conf_state);
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
l2cap_build_conf_req(chan, buf), buf);
chan->num_conf_req++;
}
return chan;
}
static int l2cap_connect_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data)
{
Bluetooth: Fix authentication if acl data comes before remote feature evt If remote device sends l2cap info request before read_remote_ext_feature completes then mgmt_connected will be sent in hci_acldata_packet() and remote name request wont be sent and eventually authentication wont happen Hcidump log of the issue < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 12 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 3 < ACL data: handle 12 flags 0x00 dlen 20 L2CAP(s): Info rsp: type 3 result 0 Fixed channel list 0x00000002 L2CAP Signalling Channel > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 This patch moves sending mgmt_connected from hci_acldata_packet() to l2cap_connect_req() since this code is to handle the scenario remote device sends l2cap connect req too fast Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-10 04:58:35 +00:00
struct hci_dev *hdev = conn->hcon->hdev;
struct hci_conn *hcon = conn->hcon;
if (cmd_len < sizeof(struct l2cap_conn_req))
return -EPROTO;
Bluetooth: Fix authentication if acl data comes before remote feature evt If remote device sends l2cap info request before read_remote_ext_feature completes then mgmt_connected will be sent in hci_acldata_packet() and remote name request wont be sent and eventually authentication wont happen Hcidump log of the issue < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 12 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 3 < ACL data: handle 12 flags 0x00 dlen 20 L2CAP(s): Info rsp: type 3 result 0 Fixed channel list 0x00000002 L2CAP Signalling Channel > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 This patch moves sending mgmt_connected from hci_acldata_packet() to l2cap_connect_req() since this code is to handle the scenario remote device sends l2cap connect req too fast Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-10 04:58:35 +00:00
hci_dev_lock(hdev);
if (hci_dev_test_flag(hdev, HCI_MGMT) &&
Bluetooth: Fix authentication if acl data comes before remote feature evt If remote device sends l2cap info request before read_remote_ext_feature completes then mgmt_connected will be sent in hci_acldata_packet() and remote name request wont be sent and eventually authentication wont happen Hcidump log of the issue < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 12 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 3 < ACL data: handle 12 flags 0x00 dlen 20 L2CAP(s): Info rsp: type 3 result 0 Fixed channel list 0x00000002 L2CAP Signalling Channel > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 This patch moves sending mgmt_connected from hci_acldata_packet() to l2cap_connect_req() since this code is to handle the scenario remote device sends l2cap connect req too fast Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-10 04:58:35 +00:00
!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &hcon->flags))
mgmt_device_connected(hdev, hcon, 0, NULL, 0);
Bluetooth: Fix authentication if acl data comes before remote feature evt If remote device sends l2cap info request before read_remote_ext_feature completes then mgmt_connected will be sent in hci_acldata_packet() and remote name request wont be sent and eventually authentication wont happen Hcidump log of the issue < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 12 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 3 < ACL data: handle 12 flags 0x00 dlen 20 L2CAP(s): Info rsp: type 3 result 0 Fixed channel list 0x00000002 L2CAP Signalling Channel > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 This patch moves sending mgmt_connected from hci_acldata_packet() to l2cap_connect_req() since this code is to handle the scenario remote device sends l2cap connect req too fast Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-10 04:58:35 +00:00
hci_dev_unlock(hdev);
l2cap_connect(conn, cmd, data, L2CAP_CONN_RSP, 0);
return 0;
}
static int l2cap_connect_create_rsp(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_conn_rsp *rsp = (struct l2cap_conn_rsp *) data;
u16 scid, dcid, result, status;
struct l2cap_chan *chan;
u8 req[128];
int err;
if (cmd_len < sizeof(*rsp))
return -EPROTO;
scid = __le16_to_cpu(rsp->scid);
dcid = __le16_to_cpu(rsp->dcid);
result = __le16_to_cpu(rsp->result);
status = __le16_to_cpu(rsp->status);
BT_DBG("dcid 0x%4.4x scid 0x%4.4x result 0x%2.2x status 0x%2.2x",
dcid, scid, result, status);
mutex_lock(&conn->chan_lock);
if (scid) {
chan = __l2cap_get_chan_by_scid(conn, scid);
if (!chan) {
err = -EBADSLT;
goto unlock;
}
} else {
chan = __l2cap_get_chan_by_ident(conn, cmd->ident);
if (!chan) {
err = -EBADSLT;
goto unlock;
}
}
err = 0;
l2cap_chan_lock(chan);
switch (result) {
case L2CAP_CR_SUCCESS:
l2cap_state_change(chan, BT_CONFIG);
chan->ident = 0;
chan->dcid = dcid;
clear_bit(CONF_CONNECT_PEND, &chan->conf_state);
if (test_and_set_bit(CONF_REQ_SENT, &chan->conf_state))
break;
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
l2cap_build_conf_req(chan, req), req);
chan->num_conf_req++;
break;
case L2CAP_CR_PEND:
set_bit(CONF_CONNECT_PEND, &chan->conf_state);
break;
default:
l2cap_chan_del(chan, ECONNREFUSED);
break;
}
l2cap_chan_unlock(chan);
unlock:
mutex_unlock(&conn->chan_lock);
return err;
}
static inline void set_default_fcs(struct l2cap_chan *chan)
{
/* FCS is enabled only in ERTM or streaming mode, if one or both
* sides request it.
*/
if (chan->mode != L2CAP_MODE_ERTM && chan->mode != L2CAP_MODE_STREAMING)
chan->fcs = L2CAP_FCS_NONE;
else if (!test_bit(CONF_RECV_NO_FCS, &chan->conf_state))
chan->fcs = L2CAP_FCS_CRC16;
}
static void l2cap_send_efs_conf_rsp(struct l2cap_chan *chan, void *data,
u8 ident, u16 flags)
{
struct l2cap_conn *conn = chan->conn;
BT_DBG("conn %p chan %p ident %d flags 0x%4.4x", conn, chan, ident,
flags);
clear_bit(CONF_LOC_CONF_PEND, &chan->conf_state);
set_bit(CONF_OUTPUT_DONE, &chan->conf_state);
l2cap_send_cmd(conn, ident, L2CAP_CONF_RSP,
l2cap_build_conf_rsp(chan, data,
L2CAP_CONF_SUCCESS, flags), data);
}
static void cmd_reject_invalid_cid(struct l2cap_conn *conn, u8 ident,
u16 scid, u16 dcid)
{
struct l2cap_cmd_rej_cid rej;
rej.reason = cpu_to_le16(L2CAP_REJ_INVALID_CID);
rej.scid = __cpu_to_le16(scid);
rej.dcid = __cpu_to_le16(dcid);
l2cap_send_cmd(conn, ident, L2CAP_COMMAND_REJ, sizeof(rej), &rej);
}
static inline int l2cap_config_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_conf_req *req = (struct l2cap_conf_req *) data;
u16 dcid, flags;
u8 rsp[64];
struct l2cap_chan *chan;
int len, err = 0;
if (cmd_len < sizeof(*req))
return -EPROTO;
dcid = __le16_to_cpu(req->dcid);
flags = __le16_to_cpu(req->flags);
BT_DBG("dcid 0x%4.4x flags 0x%2.2x", dcid, flags);
chan = l2cap_get_chan_by_scid(conn, dcid);
if (!chan) {
cmd_reject_invalid_cid(conn, cmd->ident, dcid, 0);
return 0;
}
if (chan->state != BT_CONFIG && chan->state != BT_CONNECT2) {
cmd_reject_invalid_cid(conn, cmd->ident, chan->scid,
chan->dcid);
goto unlock;
}
/* Reject if config buffer is too small. */
len = cmd_len - sizeof(*req);
if (chan->conf_len + len > sizeof(chan->conf_req)) {
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP,
l2cap_build_conf_rsp(chan, rsp,
L2CAP_CONF_REJECT, flags), rsp);
goto unlock;
}
/* Store config. */
memcpy(chan->conf_req + chan->conf_len, req->data, len);
chan->conf_len += len;
if (flags & L2CAP_CONF_FLAG_CONTINUATION) {
/* Incomplete config. Send empty response. */
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP,
l2cap_build_conf_rsp(chan, rsp,
L2CAP_CONF_SUCCESS, flags), rsp);
goto unlock;
}
/* Complete config. */
len = l2cap_parse_conf_req(chan, rsp);
if (len < 0) {
l2cap_send_disconn_req(chan, ECONNRESET);
goto unlock;
}
chan->ident = cmd->ident;
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp);
chan->num_conf_rsp++;
/* Reset config buffer. */
chan->conf_len = 0;
if (!test_bit(CONF_OUTPUT_DONE, &chan->conf_state))
goto unlock;
if (test_bit(CONF_INPUT_DONE, &chan->conf_state)) {
set_default_fcs(chan);
if (chan->mode == L2CAP_MODE_ERTM ||
chan->mode == L2CAP_MODE_STREAMING)
err = l2cap_ertm_init(chan);
if (err < 0)
l2cap_send_disconn_req(chan, -err);
else
l2cap_chan_ready(chan);
goto unlock;
}
if (!test_and_set_bit(CONF_REQ_SENT, &chan->conf_state)) {
u8 buf[64];
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_CONF_REQ,
l2cap_build_conf_req(chan, buf), buf);
chan->num_conf_req++;
}
/* Got Conf Rsp PENDING from remote side and assume we sent
Bluetooth: EFS: implement L2CAP config pending state Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17 11:35:32 +00:00
Conf Rsp PENDING in the code above */
if (test_bit(CONF_REM_CONF_PEND, &chan->conf_state) &&
test_bit(CONF_LOC_CONF_PEND, &chan->conf_state)) {
Bluetooth: EFS: implement L2CAP config pending state Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17 11:35:32 +00:00
/* check compatibility */
/* Send rsp for BR/EDR channel */
if (!chan->hs_hcon)
l2cap_send_efs_conf_rsp(chan, rsp, cmd->ident, flags);
else
chan->ident = cmd->ident;
Bluetooth: EFS: implement L2CAP config pending state Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17 11:35:32 +00:00
}
unlock:
l2cap_chan_unlock(chan);
return err;
}
static inline int l2cap_config_rsp(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_conf_rsp *rsp = (struct l2cap_conf_rsp *)data;
u16 scid, flags, result;
struct l2cap_chan *chan;
int len = cmd_len - sizeof(*rsp);
int err = 0;
if (cmd_len < sizeof(*rsp))
return -EPROTO;
scid = __le16_to_cpu(rsp->scid);
flags = __le16_to_cpu(rsp->flags);
result = __le16_to_cpu(rsp->result);
BT_DBG("scid 0x%4.4x flags 0x%2.2x result 0x%2.2x len %d", scid, flags,
result, len);
chan = l2cap_get_chan_by_scid(conn, scid);
if (!chan)
return 0;
switch (result) {
case L2CAP_CONF_SUCCESS:
l2cap_conf_rfc_get(chan, rsp->data, len);
Bluetooth: EFS: implement L2CAP config pending state Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17 11:35:32 +00:00
clear_bit(CONF_REM_CONF_PEND, &chan->conf_state);
break;
Bluetooth: EFS: implement L2CAP config pending state Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17 11:35:32 +00:00
case L2CAP_CONF_PENDING:
set_bit(CONF_REM_CONF_PEND, &chan->conf_state);
if (test_bit(CONF_LOC_CONF_PEND, &chan->conf_state)) {
char buf[64];
len = l2cap_parse_conf_rsp(chan, rsp->data, len,
buf, &result);
Bluetooth: EFS: implement L2CAP config pending state Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17 11:35:32 +00:00
if (len < 0) {
l2cap_send_disconn_req(chan, ECONNRESET);
Bluetooth: EFS: implement L2CAP config pending state Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17 11:35:32 +00:00
goto done;
}
if (!chan->hs_hcon) {
l2cap_send_efs_conf_rsp(chan, buf, cmd->ident,
0);
} else {
if (l2cap_check_efs(chan)) {
amp_create_logical_link(chan);
chan->ident = cmd->ident;
}
}
Bluetooth: EFS: implement L2CAP config pending state Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-17 11:35:32 +00:00
}
goto done;
case L2CAP_CONF_UNACCEPT:
if (chan->num_conf_rsp <= L2CAP_CONF_MAX_CONF_RSP) {
char req[64];
if (len > sizeof(req) - sizeof(struct l2cap_conf_req)) {
l2cap_send_disconn_req(chan, ECONNRESET);
goto done;
}
/* throw out any old stored conf requests */
result = L2CAP_CONF_SUCCESS;
len = l2cap_parse_conf_rsp(chan, rsp->data, len,
req, &result);
if (len < 0) {
l2cap_send_disconn_req(chan, ECONNRESET);
goto done;
}
l2cap_send_cmd(conn, l2cap_get_ident(conn),
L2CAP_CONF_REQ, len, req);
chan->num_conf_req++;
if (result != L2CAP_CONF_SUCCESS)
goto done;
break;
}
default:
l2cap_chan_set_err(chan, ECONNRESET);
__set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT);
l2cap_send_disconn_req(chan, ECONNRESET);
goto done;
}
if (flags & L2CAP_CONF_FLAG_CONTINUATION)
goto done;
set_bit(CONF_INPUT_DONE, &chan->conf_state);
if (test_bit(CONF_OUTPUT_DONE, &chan->conf_state)) {
set_default_fcs(chan);
if (chan->mode == L2CAP_MODE_ERTM ||
chan->mode == L2CAP_MODE_STREAMING)
err = l2cap_ertm_init(chan);
if (err < 0)
l2cap_send_disconn_req(chan, -err);
else
l2cap_chan_ready(chan);
}
done:
l2cap_chan_unlock(chan);
return err;
}
static inline int l2cap_disconnect_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_disconn_req *req = (struct l2cap_disconn_req *) data;
struct l2cap_disconn_rsp rsp;
u16 dcid, scid;
struct l2cap_chan *chan;
if (cmd_len != sizeof(*req))
return -EPROTO;
scid = __le16_to_cpu(req->scid);
dcid = __le16_to_cpu(req->dcid);
BT_DBG("scid 0x%4.4x dcid 0x%4.4x", scid, dcid);
mutex_lock(&conn->chan_lock);
chan = __l2cap_get_chan_by_scid(conn, dcid);
if (!chan) {
mutex_unlock(&conn->chan_lock);
cmd_reject_invalid_cid(conn, cmd->ident, dcid, scid);
return 0;
}
l2cap_chan_lock(chan);
rsp.dcid = cpu_to_le16(chan->scid);
rsp.scid = cpu_to_le16(chan->dcid);
l2cap_send_cmd(conn, cmd->ident, L2CAP_DISCONN_RSP, sizeof(rsp), &rsp);
chan->ops->set_shutdown(chan);
l2cap_chan_hold(chan);
l2cap_chan_del(chan, ECONNRESET);
l2cap_chan_unlock(chan);
chan->ops->close(chan);
l2cap_chan_put(chan);
mutex_unlock(&conn->chan_lock);
return 0;
}
static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_disconn_rsp *rsp = (struct l2cap_disconn_rsp *) data;
u16 dcid, scid;
struct l2cap_chan *chan;
if (cmd_len != sizeof(*rsp))
return -EPROTO;
scid = __le16_to_cpu(rsp->scid);
dcid = __le16_to_cpu(rsp->dcid);
BT_DBG("dcid 0x%4.4x scid 0x%4.4x", dcid, scid);
mutex_lock(&conn->chan_lock);
chan = __l2cap_get_chan_by_scid(conn, scid);
if (!chan) {
mutex_unlock(&conn->chan_lock);
return 0;
}
l2cap_chan_lock(chan);
l2cap_chan_hold(chan);
l2cap_chan_del(chan, 0);
l2cap_chan_unlock(chan);
chan->ops->close(chan);
l2cap_chan_put(chan);
mutex_unlock(&conn->chan_lock);
return 0;
}
static inline int l2cap_information_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_info_req *req = (struct l2cap_info_req *) data;
u16 type;
if (cmd_len != sizeof(*req))
return -EPROTO;
type = __le16_to_cpu(req->type);
BT_DBG("type 0x%4.4x", type);
if (type == L2CAP_IT_FEAT_MASK) {
u8 buf[8];
u32 feat_mask = l2cap_feat_mask;
struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) buf;
rsp->type = cpu_to_le16(L2CAP_IT_FEAT_MASK);
rsp->result = cpu_to_le16(L2CAP_IR_SUCCESS);
if (!disable_ertm)
feat_mask |= L2CAP_FEAT_ERTM | L2CAP_FEAT_STREAMING
| L2CAP_FEAT_FCS;
if (conn->local_fixed_chan & L2CAP_FC_A2MP)
feat_mask |= L2CAP_FEAT_EXT_FLOW
| L2CAP_FEAT_EXT_WINDOW;
put_unaligned_le32(feat_mask, rsp->data);
l2cap_send_cmd(conn, cmd->ident, L2CAP_INFO_RSP, sizeof(buf),
buf);
} else if (type == L2CAP_IT_FIXED_CHAN) {
u8 buf[12];
struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) buf;
rsp->type = cpu_to_le16(L2CAP_IT_FIXED_CHAN);
rsp->result = cpu_to_le16(L2CAP_IR_SUCCESS);
rsp->data[0] = conn->local_fixed_chan;
memset(rsp->data + 1, 0, 7);
l2cap_send_cmd(conn, cmd->ident, L2CAP_INFO_RSP, sizeof(buf),
buf);
} else {
struct l2cap_info_rsp rsp;
rsp.type = cpu_to_le16(type);
rsp.result = cpu_to_le16(L2CAP_IR_NOTSUPP);
l2cap_send_cmd(conn, cmd->ident, L2CAP_INFO_RSP, sizeof(rsp),
&rsp);
}
return 0;
}
static inline int l2cap_information_rsp(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) data;
u16 type, result;
if (cmd_len < sizeof(*rsp))
return -EPROTO;
type = __le16_to_cpu(rsp->type);
result = __le16_to_cpu(rsp->result);
BT_DBG("type 0x%4.4x result 0x%2.2x", type, result);
/* L2CAP Info req/rsp are unbound to channels, add extra checks */
if (cmd->ident != conn->info_ident ||
conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE)
return 0;
cancel_delayed_work(&conn->info_timer);
if (result != L2CAP_IR_SUCCESS) {
conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
conn->info_ident = 0;
l2cap_conn_start(conn);
return 0;
}
switch (type) {
case L2CAP_IT_FEAT_MASK:
conn->feat_mask = get_unaligned_le32(rsp->data);
if (conn->feat_mask & L2CAP_FEAT_FIXED_CHAN) {
struct l2cap_info_req req;
req.type = cpu_to_le16(L2CAP_IT_FIXED_CHAN);
conn->info_ident = l2cap_get_ident(conn);
l2cap_send_cmd(conn, conn->info_ident,
L2CAP_INFO_REQ, sizeof(req), &req);
} else {
conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
conn->info_ident = 0;
l2cap_conn_start(conn);
}
break;
case L2CAP_IT_FIXED_CHAN:
conn->remote_fixed_chan = rsp->data[0];
conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
conn->info_ident = 0;
l2cap_conn_start(conn);
break;
}
return 0;
}
static int l2cap_create_channel_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd,
u16 cmd_len, void *data)
{
struct l2cap_create_chan_req *req = data;
struct l2cap_create_chan_rsp rsp;
struct l2cap_chan *chan;
struct hci_dev *hdev;
u16 psm, scid;
if (cmd_len != sizeof(*req))
return -EPROTO;
if (!(conn->local_fixed_chan & L2CAP_FC_A2MP))
return -EINVAL;
psm = le16_to_cpu(req->psm);
scid = le16_to_cpu(req->scid);
BT_DBG("psm 0x%2.2x, scid 0x%4.4x, amp_id %d", psm, scid, req->amp_id);
/* For controller id 0 make BR/EDR connection */
if (req->amp_id == AMP_ID_BREDR) {
l2cap_connect(conn, cmd, data, L2CAP_CREATE_CHAN_RSP,
req->amp_id);
return 0;
}
/* Validate AMP controller id */
hdev = hci_dev_get(req->amp_id);
if (!hdev)
goto error;
if (hdev->dev_type != HCI_AMP || !test_bit(HCI_UP, &hdev->flags)) {
hci_dev_put(hdev);
goto error;
}
chan = l2cap_connect(conn, cmd, data, L2CAP_CREATE_CHAN_RSP,
req->amp_id);
if (chan) {
struct amp_mgr *mgr = conn->hcon->amp_mgr;
struct hci_conn *hs_hcon;
hs_hcon = hci_conn_hash_lookup_ba(hdev, AMP_LINK,
&conn->hcon->dst);
if (!hs_hcon) {
hci_dev_put(hdev);
cmd_reject_invalid_cid(conn, cmd->ident, chan->scid,
chan->dcid);
return 0;
}
BT_DBG("mgr %p bredr_chan %p hs_hcon %p", mgr, chan, hs_hcon);
mgr->bredr_chan = chan;
chan->hs_hcon = hs_hcon;
chan->fcs = L2CAP_FCS_NONE;
conn->mtu = hdev->block_mtu;
}
hci_dev_put(hdev);
return 0;
error:
rsp.dcid = 0;
rsp.scid = cpu_to_le16(scid);
rsp.result = cpu_to_le16(L2CAP_CR_BAD_AMP);
rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
l2cap_send_cmd(conn, cmd->ident, L2CAP_CREATE_CHAN_RSP,
sizeof(rsp), &rsp);
return 0;
}
static void l2cap_send_move_chan_req(struct l2cap_chan *chan, u8 dest_amp_id)
{
struct l2cap_move_chan_req req;
u8 ident;
BT_DBG("chan %p, dest_amp_id %d", chan, dest_amp_id);
ident = l2cap_get_ident(chan->conn);
chan->ident = ident;
req.icid = cpu_to_le16(chan->scid);
req.dest_amp_id = dest_amp_id;
l2cap_send_cmd(chan->conn, ident, L2CAP_MOVE_CHAN_REQ, sizeof(req),
&req);
__set_chan_timer(chan, L2CAP_MOVE_TIMEOUT);
}
static void l2cap_send_move_chan_rsp(struct l2cap_chan *chan, u16 result)
{
struct l2cap_move_chan_rsp rsp;
BT_DBG("chan %p, result 0x%4.4x", chan, result);
rsp.icid = cpu_to_le16(chan->dcid);
rsp.result = cpu_to_le16(result);
l2cap_send_cmd(chan->conn, chan->ident, L2CAP_MOVE_CHAN_RSP,
sizeof(rsp), &rsp);
}
static void l2cap_send_move_chan_cfm(struct l2cap_chan *chan, u16 result)
{
struct l2cap_move_chan_cfm cfm;
BT_DBG("chan %p, result 0x%4.4x", chan, result);
chan->ident = l2cap_get_ident(chan->conn);
cfm.icid = cpu_to_le16(chan->scid);
cfm.result = cpu_to_le16(result);
l2cap_send_cmd(chan->conn, chan->ident, L2CAP_MOVE_CHAN_CFM,
sizeof(cfm), &cfm);
__set_chan_timer(chan, L2CAP_MOVE_TIMEOUT);
}
static void l2cap_send_move_chan_cfm_icid(struct l2cap_conn *conn, u16 icid)
{
struct l2cap_move_chan_cfm cfm;
BT_DBG("conn %p, icid 0x%4.4x", conn, icid);
cfm.icid = cpu_to_le16(icid);
cfm.result = cpu_to_le16(L2CAP_MC_UNCONFIRMED);
l2cap_send_cmd(conn, l2cap_get_ident(conn), L2CAP_MOVE_CHAN_CFM,
sizeof(cfm), &cfm);
}
static void l2cap_send_move_chan_cfm_rsp(struct l2cap_conn *conn, u8 ident,
u16 icid)
{
struct l2cap_move_chan_cfm_rsp rsp;
BT_DBG("icid 0x%4.4x", icid);
rsp.icid = cpu_to_le16(icid);
l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_CFM_RSP, sizeof(rsp), &rsp);
}
static void __release_logical_link(struct l2cap_chan *chan)
{
chan->hs_hchan = NULL;
chan->hs_hcon = NULL;
/* Placeholder - release the logical link */
}
static void l2cap_logical_fail(struct l2cap_chan *chan)
{
/* Logical link setup failed */
if (chan->state != BT_CONNECTED) {
/* Create channel failure, disconnect */
l2cap_send_disconn_req(chan, ECONNRESET);
return;
}
switch (chan->move_role) {
case L2CAP_MOVE_ROLE_RESPONDER:
l2cap_move_done(chan);
l2cap_send_move_chan_rsp(chan, L2CAP_MR_NOT_SUPP);
break;
case L2CAP_MOVE_ROLE_INITIATOR:
if (chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_COMP ||
chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_CFM) {
/* Remote has only sent pending or
* success responses, clean up
*/
l2cap_move_done(chan);
}
/* Other amp move states imply that the move
* has already aborted
*/
l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
break;
}
}
static void l2cap_logical_finish_create(struct l2cap_chan *chan,
struct hci_chan *hchan)
{
struct l2cap_conf_rsp rsp;
chan->hs_hchan = hchan;
chan->hs_hcon->l2cap_data = chan->conn;
l2cap_send_efs_conf_rsp(chan, &rsp, chan->ident, 0);
if (test_bit(CONF_INPUT_DONE, &chan->conf_state)) {
int err;
set_default_fcs(chan);
err = l2cap_ertm_init(chan);
if (err < 0)
l2cap_send_disconn_req(chan, -err);
else
l2cap_chan_ready(chan);
}
}
static void l2cap_logical_finish_move(struct l2cap_chan *chan,
struct hci_chan *hchan)
{
chan->hs_hcon = hchan->conn;
chan->hs_hcon->l2cap_data = chan->conn;
BT_DBG("move_state %d", chan->move_state);
switch (chan->move_state) {
case L2CAP_MOVE_WAIT_LOGICAL_COMP:
/* Move confirm will be sent after a success
* response is received
*/
chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
break;
case L2CAP_MOVE_WAIT_LOGICAL_CFM:
if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
} else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
chan->move_state = L2CAP_MOVE_WAIT_CONFIRM_RSP;
l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
} else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
l2cap_send_move_chan_rsp(chan, L2CAP_MR_SUCCESS);
}
break;
default:
/* Move was not in expected state, free the channel */
__release_logical_link(chan);
chan->move_state = L2CAP_MOVE_STABLE;
}
}
/* Call with chan locked */
void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
u8 status)
{
BT_DBG("chan %p, hchan %p, status %d", chan, hchan, status);
if (status) {
l2cap_logical_fail(chan);
__release_logical_link(chan);
return;
}
if (chan->state != BT_CONNECTED) {
/* Ignore logical link if channel is on BR/EDR */
if (chan->local_amp_id != AMP_ID_BREDR)
l2cap_logical_finish_create(chan, hchan);
} else {
l2cap_logical_finish_move(chan, hchan);
}
}
void l2cap_move_start(struct l2cap_chan *chan)
{
BT_DBG("chan %p", chan);
if (chan->local_amp_id == AMP_ID_BREDR) {
if (chan->chan_policy != BT_CHANNEL_POLICY_AMP_PREFERRED)
return;
chan->move_role = L2CAP_MOVE_ROLE_INITIATOR;
chan->move_state = L2CAP_MOVE_WAIT_PREPARE;
/* Placeholder - start physical link setup */
} else {
chan->move_role = L2CAP_MOVE_ROLE_INITIATOR;
chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
chan->move_id = 0;
l2cap_move_setup(chan);
l2cap_send_move_chan_req(chan, 0);
}
}
static void l2cap_do_create(struct l2cap_chan *chan, int result,
u8 local_amp_id, u8 remote_amp_id)
{
BT_DBG("chan %p state %s %u -> %u", chan, state_to_string(chan->state),
local_amp_id, remote_amp_id);
chan->fcs = L2CAP_FCS_NONE;
/* Outgoing channel on AMP */
if (chan->state == BT_CONNECT) {
if (result == L2CAP_CR_SUCCESS) {
chan->local_amp_id = local_amp_id;
l2cap_send_create_chan_req(chan, remote_amp_id);
} else {
/* Revert to BR/EDR connect */
l2cap_send_conn_req(chan);
}
return;
}
/* Incoming channel on AMP */
if (__l2cap_no_conn_pending(chan)) {
struct l2cap_conn_rsp rsp;
char buf[128];
rsp.scid = cpu_to_le16(chan->dcid);
rsp.dcid = cpu_to_le16(chan->scid);
if (result == L2CAP_CR_SUCCESS) {
/* Send successful response */
rsp.result = cpu_to_le16(L2CAP_CR_SUCCESS);
rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
} else {
/* Send negative response */
rsp.result = cpu_to_le16(L2CAP_CR_NO_MEM);
rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
}
l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CREATE_CHAN_RSP,
sizeof(rsp), &rsp);
if (result == L2CAP_CR_SUCCESS) {
l2cap_state_change(chan, BT_CONFIG);
set_bit(CONF_REQ_SENT, &chan->conf_state);
l2cap_send_cmd(chan->conn, l2cap_get_ident(chan->conn),
L2CAP_CONF_REQ,
l2cap_build_conf_req(chan, buf), buf);
chan->num_conf_req++;
}
}
}
static void l2cap_do_move_initiate(struct l2cap_chan *chan, u8 local_amp_id,
u8 remote_amp_id)
{
l2cap_move_setup(chan);
chan->move_id = local_amp_id;
chan->move_state = L2CAP_MOVE_WAIT_RSP;
l2cap_send_move_chan_req(chan, remote_amp_id);
}
static void l2cap_do_move_respond(struct l2cap_chan *chan, int result)
{
struct hci_chan *hchan = NULL;
/* Placeholder - get hci_chan for logical link */
if (hchan) {
if (hchan->state == BT_CONNECTED) {
/* Logical link is ready to go */
chan->hs_hcon = hchan->conn;
chan->hs_hcon->l2cap_data = chan->conn;
chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
l2cap_send_move_chan_rsp(chan, L2CAP_MR_SUCCESS);
l2cap_logical_cfm(chan, hchan, L2CAP_MR_SUCCESS);
} else {
/* Wait for logical link to be ready */
chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_CFM;
}
} else {
/* Logical link not available */
l2cap_send_move_chan_rsp(chan, L2CAP_MR_NOT_ALLOWED);
}
}
static void l2cap_do_move_cancel(struct l2cap_chan *chan, int result)
{
if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
u8 rsp_result;
if (result == -EINVAL)
rsp_result = L2CAP_MR_BAD_ID;
else
rsp_result = L2CAP_MR_NOT_ALLOWED;
l2cap_send_move_chan_rsp(chan, rsp_result);
}
chan->move_role = L2CAP_MOVE_ROLE_NONE;
chan->move_state = L2CAP_MOVE_STABLE;
/* Restart data transmission */
l2cap_ertm_send(chan);
}
/* Invoke with locked chan */
void __l2cap_physical_cfm(struct l2cap_chan *chan, int result)
{
u8 local_amp_id = chan->local_amp_id;
u8 remote_amp_id = chan->remote_amp_id;
BT_DBG("chan %p, result %d, local_amp_id %d, remote_amp_id %d",
chan, result, local_amp_id, remote_amp_id);
if (chan->state == BT_DISCONN || chan->state == BT_CLOSED) {
l2cap_chan_unlock(chan);
return;
}
if (chan->state != BT_CONNECTED) {
l2cap_do_create(chan, result, local_amp_id, remote_amp_id);
} else if (result != L2CAP_MR_SUCCESS) {
l2cap_do_move_cancel(chan, result);
} else {
switch (chan->move_role) {
case L2CAP_MOVE_ROLE_INITIATOR:
l2cap_do_move_initiate(chan, local_amp_id,
remote_amp_id);
break;
case L2CAP_MOVE_ROLE_RESPONDER:
l2cap_do_move_respond(chan, result);
break;
default:
l2cap_do_move_cancel(chan, result);
break;
}
}
}
static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd,
u16 cmd_len, void *data)
{
struct l2cap_move_chan_req *req = data;
struct l2cap_move_chan_rsp rsp;
struct l2cap_chan *chan;
u16 icid = 0;
u16 result = L2CAP_MR_NOT_ALLOWED;
if (cmd_len != sizeof(*req))
return -EPROTO;
icid = le16_to_cpu(req->icid);
BT_DBG("icid 0x%4.4x, dest_amp_id %d", icid, req->dest_amp_id);
if (!(conn->local_fixed_chan & L2CAP_FC_A2MP))
return -EINVAL;
chan = l2cap_get_chan_by_dcid(conn, icid);
if (!chan) {
rsp.icid = cpu_to_le16(icid);
rsp.result = cpu_to_le16(L2CAP_MR_NOT_ALLOWED);
l2cap_send_cmd(conn, cmd->ident, L2CAP_MOVE_CHAN_RSP,
sizeof(rsp), &rsp);
return 0;
}
chan->ident = cmd->ident;
if (chan->scid < L2CAP_CID_DYN_START ||
chan->chan_policy == BT_CHANNEL_POLICY_BREDR_ONLY ||
(chan->mode != L2CAP_MODE_ERTM &&
chan->mode != L2CAP_MODE_STREAMING)) {
result = L2CAP_MR_NOT_ALLOWED;
goto send_move_response;
}
if (chan->local_amp_id == req->dest_amp_id) {
result = L2CAP_MR_SAME_ID;
goto send_move_response;
}
if (req->dest_amp_id != AMP_ID_BREDR) {
struct hci_dev *hdev;
hdev = hci_dev_get(req->dest_amp_id);
if (!hdev || hdev->dev_type != HCI_AMP ||
!test_bit(HCI_UP, &hdev->flags)) {
if (hdev)
hci_dev_put(hdev);
result = L2CAP_MR_BAD_ID;
goto send_move_response;
}
hci_dev_put(hdev);
}
/* Detect a move collision. Only send a collision response
* if this side has "lost", otherwise proceed with the move.
* The winner has the larger bd_addr.
*/
if ((__chan_is_moving(chan) ||
chan->move_role != L2CAP_MOVE_ROLE_NONE) &&
bacmp(&conn->hcon->src, &conn->hcon->dst) > 0) {
result = L2CAP_MR_COLLISION;
goto send_move_response;
}
chan->move_role = L2CAP_MOVE_ROLE_RESPONDER;
l2cap_move_setup(chan);
chan->move_id = req->dest_amp_id;
icid = chan->dcid;
if (req->dest_amp_id == AMP_ID_BREDR) {
/* Moving to BR/EDR */
if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
result = L2CAP_MR_PEND;
} else {
chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
result = L2CAP_MR_SUCCESS;
}
} else {
chan->move_state = L2CAP_MOVE_WAIT_PREPARE;
/* Placeholder - uncomment when amp functions are available */
/*amp_accept_physical(chan, req->dest_amp_id);*/
result = L2CAP_MR_PEND;
}
send_move_response:
l2cap_send_move_chan_rsp(chan, result);
l2cap_chan_unlock(chan);
return 0;
}
static void l2cap_move_continue(struct l2cap_conn *conn, u16 icid, u16 result)
{
struct l2cap_chan *chan;
struct hci_chan *hchan = NULL;
chan = l2cap_get_chan_by_scid(conn, icid);
if (!chan) {
l2cap_send_move_chan_cfm_icid(conn, icid);
return;
}
__clear_chan_timer(chan);
if (result == L2CAP_MR_PEND)
__set_chan_timer(chan, L2CAP_MOVE_ERTX_TIMEOUT);
switch (chan->move_state) {
case L2CAP_MOVE_WAIT_LOGICAL_COMP:
/* Move confirm will be sent when logical link
* is complete.
*/
chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_CFM;
break;
case L2CAP_MOVE_WAIT_RSP_SUCCESS:
if (result == L2CAP_MR_PEND) {
break;
} else if (test_bit(CONN_LOCAL_BUSY,
&chan->conn_state)) {
chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
} else {
/* Logical link is up or moving to BR/EDR,
* proceed with move
*/
chan->move_state = L2CAP_MOVE_WAIT_CONFIRM_RSP;
l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
}
break;
case L2CAP_MOVE_WAIT_RSP:
/* Moving to AMP */
if (result == L2CAP_MR_SUCCESS) {
/* Remote is ready, send confirm immediately
* after logical link is ready
*/
chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_CFM;
} else {
/* Both logical link and move success
* are required to confirm
*/
chan->move_state = L2CAP_MOVE_WAIT_LOGICAL_COMP;
}
/* Placeholder - get hci_chan for logical link */
if (!hchan) {
/* Logical link not available */
l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
break;
}
/* If the logical link is not yet connected, do not
* send confirmation.
*/
if (hchan->state != BT_CONNECTED)
break;
/* Logical link is already ready to go */
chan->hs_hcon = hchan->conn;
chan->hs_hcon->l2cap_data = chan->conn;
if (result == L2CAP_MR_SUCCESS) {
/* Can confirm now */
l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
} else {
/* Now only need move success
* to confirm
*/
chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
}
l2cap_logical_cfm(chan, hchan, L2CAP_MR_SUCCESS);
break;
default:
/* Any other amp move state means the move failed. */
chan->move_id = chan->local_amp_id;
l2cap_move_done(chan);
l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
}
l2cap_chan_unlock(chan);
}
static void l2cap_move_fail(struct l2cap_conn *conn, u8 ident, u16 icid,
u16 result)
{
struct l2cap_chan *chan;
chan = l2cap_get_chan_by_ident(conn, ident);
if (!chan) {
/* Could not locate channel, icid is best guess */
l2cap_send_move_chan_cfm_icid(conn, icid);
return;
}
__clear_chan_timer(chan);
if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
if (result == L2CAP_MR_COLLISION) {
chan->move_role = L2CAP_MOVE_ROLE_RESPONDER;
} else {
/* Cleanup - cancel move */
chan->move_id = chan->local_amp_id;
l2cap_move_done(chan);
}
}
l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
l2cap_chan_unlock(chan);
}
static int l2cap_move_channel_rsp(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd,
u16 cmd_len, void *data)
{
struct l2cap_move_chan_rsp *rsp = data;
u16 icid, result;
if (cmd_len != sizeof(*rsp))
return -EPROTO;
icid = le16_to_cpu(rsp->icid);
result = le16_to_cpu(rsp->result);
BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
if (result == L2CAP_MR_SUCCESS || result == L2CAP_MR_PEND)
l2cap_move_continue(conn, icid, result);
else
l2cap_move_fail(conn, cmd->ident, icid, result);
return 0;
}
static int l2cap_move_channel_confirm(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd,
u16 cmd_len, void *data)
{
struct l2cap_move_chan_cfm *cfm = data;
struct l2cap_chan *chan;
u16 icid, result;
if (cmd_len != sizeof(*cfm))
return -EPROTO;
icid = le16_to_cpu(cfm->icid);
result = le16_to_cpu(cfm->result);
BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
chan = l2cap_get_chan_by_dcid(conn, icid);
if (!chan) {
/* Spec requires a response even if the icid was not found */
l2cap_send_move_chan_cfm_rsp(conn, cmd->ident, icid);
return 0;
}
if (chan->move_state == L2CAP_MOVE_WAIT_CONFIRM) {
if (result == L2CAP_MC_CONFIRMED) {
chan->local_amp_id = chan->move_id;
if (chan->local_amp_id == AMP_ID_BREDR)
__release_logical_link(chan);
} else {
chan->move_id = chan->local_amp_id;
}
l2cap_move_done(chan);
}
l2cap_send_move_chan_cfm_rsp(conn, cmd->ident, icid);
l2cap_chan_unlock(chan);
return 0;
}
static inline int l2cap_move_channel_confirm_rsp(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd,
u16 cmd_len, void *data)
{
struct l2cap_move_chan_cfm_rsp *rsp = data;
struct l2cap_chan *chan;
u16 icid;
if (cmd_len != sizeof(*rsp))
return -EPROTO;
icid = le16_to_cpu(rsp->icid);
BT_DBG("icid 0x%4.4x", icid);
chan = l2cap_get_chan_by_scid(conn, icid);
if (!chan)
return 0;
__clear_chan_timer(chan);
if (chan->move_state == L2CAP_MOVE_WAIT_CONFIRM_RSP) {
chan->local_amp_id = chan->move_id;
if (chan->local_amp_id == AMP_ID_BREDR && chan->hs_hchan)
__release_logical_link(chan);
l2cap_move_done(chan);
}
l2cap_chan_unlock(chan);
return 0;
}
static inline int l2cap_conn_param_update_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd,
u16 cmd_len, u8 *data)
{
struct hci_conn *hcon = conn->hcon;
struct l2cap_conn_param_update_req *req;
struct l2cap_conn_param_update_rsp rsp;
u16 min, max, latency, to_multiplier;
int err;
if (hcon->role != HCI_ROLE_MASTER)
return -EINVAL;
if (cmd_len != sizeof(struct l2cap_conn_param_update_req))
return -EPROTO;
req = (struct l2cap_conn_param_update_req *) data;
min = __le16_to_cpu(req->min);
max = __le16_to_cpu(req->max);
latency = __le16_to_cpu(req->latency);
to_multiplier = __le16_to_cpu(req->to_multiplier);
BT_DBG("min 0x%4.4x max 0x%4.4x latency: 0x%4.4x Timeout: 0x%4.4x",
min, max, latency, to_multiplier);
memset(&rsp, 0, sizeof(rsp));
err = hci_check_conn_params(min, max, latency, to_multiplier);
if (err)
rsp.result = cpu_to_le16(L2CAP_CONN_PARAM_REJECTED);
else
rsp.result = cpu_to_le16(L2CAP_CONN_PARAM_ACCEPTED);
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONN_PARAM_UPDATE_RSP,
sizeof(rsp), &rsp);
if (!err) {
u8 store_hint;
store_hint = hci_le_conn_update(hcon, min, max, latency,
to_multiplier);
mgmt_new_conn_param(hcon->hdev, &hcon->dst, hcon->dst_type,
store_hint, min, max, latency,
to_multiplier);
}
return 0;
}
static int l2cap_le_connect_rsp(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_le_conn_rsp *rsp = (struct l2cap_le_conn_rsp *) data;
struct hci_conn *hcon = conn->hcon;
u16 dcid, mtu, mps, credits, result;
struct l2cap_chan *chan;
int err, sec_level;
if (cmd_len < sizeof(*rsp))
return -EPROTO;
dcid = __le16_to_cpu(rsp->dcid);
mtu = __le16_to_cpu(rsp->mtu);
mps = __le16_to_cpu(rsp->mps);
credits = __le16_to_cpu(rsp->credits);
result = __le16_to_cpu(rsp->result);
if (result == L2CAP_CR_SUCCESS && (mtu < 23 || mps < 23 ||
dcid < L2CAP_CID_DYN_START ||
dcid > L2CAP_CID_LE_DYN_END))
return -EPROTO;
BT_DBG("dcid 0x%4.4x mtu %u mps %u credits %u result 0x%2.2x",
dcid, mtu, mps, credits, result);
mutex_lock(&conn->chan_lock);
chan = __l2cap_get_chan_by_ident(conn, cmd->ident);
if (!chan) {
err = -EBADSLT;
goto unlock;
}
err = 0;
l2cap_chan_lock(chan);
switch (result) {
case L2CAP_CR_SUCCESS:
if (__l2cap_get_chan_by_dcid(conn, dcid)) {
err = -EBADSLT;
break;
}
chan->ident = 0;
chan->dcid = dcid;
chan->omtu = mtu;
chan->remote_mps = mps;
chan->tx_credits = credits;
l2cap_chan_ready(chan);
break;
case L2CAP_CR_AUTHENTICATION:
case L2CAP_CR_ENCRYPTION:
/* If we already have MITM protection we can't do
* anything.
*/
if (hcon->sec_level > BT_SECURITY_MEDIUM) {
l2cap_chan_del(chan, ECONNREFUSED);
break;
}
sec_level = hcon->sec_level + 1;
if (chan->sec_level < sec_level)
chan->sec_level = sec_level;
/* We'll need to send a new Connect Request */
clear_bit(FLAG_LE_CONN_REQ_SENT, &chan->flags);
smp_conn_security(hcon, chan->sec_level);
break;
default:
l2cap_chan_del(chan, ECONNREFUSED);
break;
}
l2cap_chan_unlock(chan);
unlock:
mutex_unlock(&conn->chan_lock);
return err;
}
static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
int err = 0;
switch (cmd->code) {
case L2CAP_COMMAND_REJ:
l2cap_command_rej(conn, cmd, cmd_len, data);
break;
case L2CAP_CONN_REQ:
err = l2cap_connect_req(conn, cmd, cmd_len, data);
break;
case L2CAP_CONN_RSP:
case L2CAP_CREATE_CHAN_RSP:
l2cap_connect_create_rsp(conn, cmd, cmd_len, data);
break;
case L2CAP_CONF_REQ:
err = l2cap_config_req(conn, cmd, cmd_len, data);
break;
case L2CAP_CONF_RSP:
l2cap_config_rsp(conn, cmd, cmd_len, data);
break;
case L2CAP_DISCONN_REQ:
err = l2cap_disconnect_req(conn, cmd, cmd_len, data);
break;
case L2CAP_DISCONN_RSP:
l2cap_disconnect_rsp(conn, cmd, cmd_len, data);
break;
case L2CAP_ECHO_REQ:
l2cap_send_cmd(conn, cmd->ident, L2CAP_ECHO_RSP, cmd_len, data);
break;
case L2CAP_ECHO_RSP:
break;
case L2CAP_INFO_REQ:
err = l2cap_information_req(conn, cmd, cmd_len, data);
break;
case L2CAP_INFO_RSP:
l2cap_information_rsp(conn, cmd, cmd_len, data);
break;
case L2CAP_CREATE_CHAN_REQ:
err = l2cap_create_channel_req(conn, cmd, cmd_len, data);
break;
case L2CAP_MOVE_CHAN_REQ:
err = l2cap_move_channel_req(conn, cmd, cmd_len, data);
break;
case L2CAP_MOVE_CHAN_RSP:
l2cap_move_channel_rsp(conn, cmd, cmd_len, data);
break;
case L2CAP_MOVE_CHAN_CFM:
err = l2cap_move_channel_confirm(conn, cmd, cmd_len, data);
break;
case L2CAP_MOVE_CHAN_CFM_RSP:
l2cap_move_channel_confirm_rsp(conn, cmd, cmd_len, data);
break;
default:
BT_ERR("Unknown BR/EDR signaling command 0x%2.2x", cmd->code);
err = -EINVAL;
break;
}
return err;
}
static int l2cap_le_connect_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_le_conn_req *req = (struct l2cap_le_conn_req *) data;
struct l2cap_le_conn_rsp rsp;
struct l2cap_chan *chan, *pchan;
u16 dcid, scid, credits, mtu, mps;
__le16 psm;
u8 result;
if (cmd_len != sizeof(*req))
return -EPROTO;
scid = __le16_to_cpu(req->scid);
mtu = __le16_to_cpu(req->mtu);
mps = __le16_to_cpu(req->mps);
psm = req->psm;
dcid = 0;
credits = 0;
if (mtu < 23 || mps < 23)
return -EPROTO;
BT_DBG("psm 0x%2.2x scid 0x%4.4x mtu %u mps %u", __le16_to_cpu(psm),
scid, mtu, mps);
/* Check if we have socket listening on psm */
pchan = l2cap_global_chan_by_psm(BT_LISTEN, psm, &conn->hcon->src,
&conn->hcon->dst, LE_LINK);
if (!pchan) {
result = L2CAP_CR_BAD_PSM;
chan = NULL;
goto response;
}
mutex_lock(&conn->chan_lock);
l2cap_chan_lock(pchan);
if (!smp_sufficient_security(conn->hcon, pchan->sec_level,
SMP_ALLOW_STK)) {
result = L2CAP_CR_AUTHENTICATION;
chan = NULL;
goto response_unlock;
}
/* Check for valid dynamic CID range */
if (scid < L2CAP_CID_DYN_START || scid > L2CAP_CID_LE_DYN_END) {
result = L2CAP_CR_INVALID_SCID;
chan = NULL;
goto response_unlock;
}
/* Check if we already have channel with that dcid */
if (__l2cap_get_chan_by_dcid(conn, scid)) {
result = L2CAP_CR_SCID_IN_USE;
chan = NULL;
goto response_unlock;
}
chan = pchan->ops->new_connection(pchan);
if (!chan) {
result = L2CAP_CR_NO_MEM;
goto response_unlock;
}
l2cap_le_flowctl_init(chan);
bacpy(&chan->src, &conn->hcon->src);
bacpy(&chan->dst, &conn->hcon->dst);
chan->src_type = bdaddr_src_type(conn->hcon);
chan->dst_type = bdaddr_dst_type(conn->hcon);
chan->psm = psm;
chan->dcid = scid;
chan->omtu = mtu;
chan->remote_mps = mps;
chan->tx_credits = __le16_to_cpu(req->credits);
__l2cap_chan_add(conn, chan);
dcid = chan->scid;
credits = chan->rx_credits;
__set_chan_timer(chan, chan->ops->get_sndtimeo(chan));
chan->ident = cmd->ident;
if (test_bit(FLAG_DEFER_SETUP, &chan->flags)) {
l2cap_state_change(chan, BT_CONNECT2);
/* The following result value is actually not defined
* for LE CoC but we use it to let the function know
* that it should bail out after doing its cleanup
* instead of sending a response.
*/
result = L2CAP_CR_PEND;
chan->ops->defer(chan);
} else {
l2cap_chan_ready(chan);
result = L2CAP_CR_SUCCESS;
}
response_unlock:
l2cap_chan_unlock(pchan);
mutex_unlock(&conn->chan_lock);
l2cap_chan_put(pchan);
if (result == L2CAP_CR_PEND)
return 0;
response:
if (chan) {
rsp.mtu = cpu_to_le16(chan->imtu);
rsp.mps = cpu_to_le16(chan->mps);
} else {
rsp.mtu = 0;
rsp.mps = 0;
}
rsp.dcid = cpu_to_le16(dcid);
rsp.credits = cpu_to_le16(credits);
rsp.result = cpu_to_le16(result);
l2cap_send_cmd(conn, cmd->ident, L2CAP_LE_CONN_RSP, sizeof(rsp), &rsp);
return 0;
}
static inline int l2cap_le_credits(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_le_credits *pkt;
struct l2cap_chan *chan;
u16 cid, credits, max_credits;
if (cmd_len != sizeof(*pkt))
return -EPROTO;
pkt = (struct l2cap_le_credits *) data;
cid = __le16_to_cpu(pkt->cid);
credits = __le16_to_cpu(pkt->credits);
BT_DBG("cid 0x%4.4x credits 0x%4.4x", cid, credits);
chan = l2cap_get_chan_by_dcid(conn, cid);
if (!chan)
return -EBADSLT;
max_credits = LE_FLOWCTL_MAX_CREDITS - chan->tx_credits;
if (credits > max_credits) {
BT_ERR("LE credits overflow");
l2cap_send_disconn_req(chan, ECONNRESET);
l2cap_chan_unlock(chan);
/* Return 0 so that we don't trigger an unnecessary
* command reject packet.
*/
return 0;
}
chan->tx_credits += credits;
/* Resume sending */
l2cap_le_flowctl_send(chan);
if (chan->tx_credits)
chan->ops->resume(chan);
l2cap_chan_unlock(chan);
return 0;
}
static inline int l2cap_le_command_rej(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
struct l2cap_cmd_rej_unk *rej = (struct l2cap_cmd_rej_unk *) data;
struct l2cap_chan *chan;
if (cmd_len < sizeof(*rej))
return -EPROTO;
mutex_lock(&conn->chan_lock);
chan = __l2cap_get_chan_by_ident(conn, cmd->ident);
if (!chan)
goto done;
l2cap_chan_lock(chan);
l2cap_chan_del(chan, ECONNREFUSED);
l2cap_chan_unlock(chan);
done:
mutex_unlock(&conn->chan_lock);
return 0;
}
static inline int l2cap_le_sig_cmd(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd, u16 cmd_len,
u8 *data)
{
int err = 0;
switch (cmd->code) {
case L2CAP_COMMAND_REJ:
l2cap_le_command_rej(conn, cmd, cmd_len, data);
break;
case L2CAP_CONN_PARAM_UPDATE_REQ:
err = l2cap_conn_param_update_req(conn, cmd, cmd_len, data);
break;
case L2CAP_CONN_PARAM_UPDATE_RSP:
break;
case L2CAP_LE_CONN_RSP:
l2cap_le_connect_rsp(conn, cmd, cmd_len, data);
break;
case L2CAP_LE_CONN_REQ:
err = l2cap_le_connect_req(conn, cmd, cmd_len, data);
break;
case L2CAP_LE_CREDITS:
err = l2cap_le_credits(conn, cmd, cmd_len, data);
break;
case L2CAP_DISCONN_REQ:
err = l2cap_disconnect_req(conn, cmd, cmd_len, data);
break;
case L2CAP_DISCONN_RSP:
l2cap_disconnect_rsp(conn, cmd, cmd_len, data);
break;
default:
BT_ERR("Unknown LE signaling command 0x%2.2x", cmd->code);
err = -EINVAL;
break;
}
return err;
}
static inline void l2cap_le_sig_channel(struct l2cap_conn *conn,
struct sk_buff *skb)
{
struct hci_conn *hcon = conn->hcon;
struct l2cap_cmd_hdr *cmd;
u16 len;
int err;
if (hcon->type != LE_LINK)
goto drop;
if (skb->len < L2CAP_CMD_HDR_SIZE)
goto drop;
cmd = (void *) skb->data;
skb_pull(skb, L2CAP_CMD_HDR_SIZE);
len = le16_to_cpu(cmd->len);
BT_DBG("code 0x%2.2x len %d id 0x%2.2x", cmd->code, len, cmd->ident);
if (len != skb->len || !cmd->ident) {
BT_DBG("corrupted command");
goto drop;
}
err = l2cap_le_sig_cmd(conn, cmd, len, skb->data);
if (err) {
struct l2cap_cmd_rej_unk rej;
BT_ERR("Wrong link type (%d)", err);
rej.reason = cpu_to_le16(L2CAP_REJ_NOT_UNDERSTOOD);
l2cap_send_cmd(conn, cmd->ident, L2CAP_COMMAND_REJ,
sizeof(rej), &rej);
}
drop:
kfree_skb(skb);
}
static inline void l2cap_sig_channel(struct l2cap_conn *conn,
struct sk_buff *skb)
{
struct hci_conn *hcon = conn->hcon;
u8 *data = skb->data;
int len = skb->len;
struct l2cap_cmd_hdr cmd;
int err;
l2cap_raw_recv(conn, skb);
if (hcon->type != ACL_LINK)
goto drop;
while (len >= L2CAP_CMD_HDR_SIZE) {
u16 cmd_len;
memcpy(&cmd, data, L2CAP_CMD_HDR_SIZE);
data += L2CAP_CMD_HDR_SIZE;
len -= L2CAP_CMD_HDR_SIZE;
cmd_len = le16_to_cpu(cmd.len);
BT_DBG("code 0x%2.2x len %d id 0x%2.2x", cmd.code, cmd_len,
cmd.ident);
if (cmd_len > len || !cmd.ident) {
BT_DBG("corrupted command");
break;
}
err = l2cap_bredr_sig_cmd(conn, &cmd, cmd_len, data);
if (err) {
struct l2cap_cmd_rej_unk rej;
BT_ERR("Wrong link type (%d)", err);
rej.reason = cpu_to_le16(L2CAP_REJ_NOT_UNDERSTOOD);
l2cap_send_cmd(conn, cmd.ident, L2CAP_COMMAND_REJ,
sizeof(rej), &rej);
}
data += cmd_len;
len -= cmd_len;
}
drop:
kfree_skb(skb);
}
static int l2cap_check_fcs(struct l2cap_chan *chan, struct sk_buff *skb)
{
u16 our_fcs, rcv_fcs;
int hdr_size;
if (test_bit(FLAG_EXT_CTRL, &chan->flags))
hdr_size = L2CAP_EXT_HDR_SIZE;
else
hdr_size = L2CAP_ENH_HDR_SIZE;
if (chan->fcs == L2CAP_FCS_CRC16) {
skb_trim(skb, skb->len - L2CAP_FCS_SIZE);
rcv_fcs = get_unaligned_le16(skb->data + skb->len);
our_fcs = crc16(0, skb->data - hdr_size, skb->len + hdr_size);
if (our_fcs != rcv_fcs)
return -EBADMSG;
}
return 0;
}
static void l2cap_send_i_or_rr_or_rnr(struct l2cap_chan *chan)
{
struct l2cap_ctrl control;
BT_DBG("chan %p", chan);
memset(&control, 0, sizeof(control));
control.sframe = 1;
control.final = 1;
control.reqseq = chan->buffer_seq;
set_bit(CONN_SEND_FBIT, &chan->conn_state);
if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
control.super = L2CAP_SUPER_RNR;
l2cap_send_sframe(chan, &control);
}
if (test_and_clear_bit(CONN_REMOTE_BUSY, &chan->conn_state) &&
chan->unacked_frames > 0)
__set_retrans_timer(chan);
/* Send pending iframes */
l2cap_ertm_send(chan);
if (!test_bit(CONN_LOCAL_BUSY, &chan->conn_state) &&
test_bit(CONN_SEND_FBIT, &chan->conn_state)) {
/* F-bit wasn't sent in an s-frame or i-frame yet, so
* send it now.
*/
control.super = L2CAP_SUPER_RR;
l2cap_send_sframe(chan, &control);
}
}
static void append_skb_frag(struct sk_buff *skb, struct sk_buff *new_frag,
struct sk_buff **last_frag)
{
/* skb->len reflects data in skb as well as all fragments
* skb->data_len reflects only data in fragments
*/
if (!skb_has_frag_list(skb))
skb_shinfo(skb)->frag_list = new_frag;
new_frag->next = NULL;
(*last_frag)->next = new_frag;
*last_frag = new_frag;
skb->len += new_frag->len;
skb->data_len += new_frag->len;
skb->truesize += new_frag->truesize;
}
static int l2cap_reassemble_sdu(struct l2cap_chan *chan, struct sk_buff *skb,
struct l2cap_ctrl *control)
{
int err = -EINVAL;
switch (control->sar) {
case L2CAP_SAR_UNSEGMENTED:
if (chan->sdu)
break;
err = chan->ops->recv(chan, skb);
break;
case L2CAP_SAR_START:
if (chan->sdu)
break;
Bluetooth: split sk_filter in l2cap_sock_recv_cb During an audit for sk_filter(), we found that rx_busy_skb handling in l2cap_sock_recv_cb() and l2cap_sock_recvmsg() looks not quite as intended. The assumption from commit e328140fdacb ("Bluetooth: Use event-driven approach for handling ERTM receive buffer") is that errors returned from sock_queue_rcv_skb() are due to receive buffer shortage. However, nothing should prevent doing a setsockopt() with SO_ATTACH_FILTER on the socket, that could drop some of the incoming skbs when handled in sock_queue_rcv_skb(). In that case sock_queue_rcv_skb() will return with -EPERM, propagated from sk_filter() and if in L2CAP_MODE_ERTM mode, wrong assumption was that we failed due to receive buffer being full. From that point onwards, due to the to-be-dropped skb being held in rx_busy_skb, we cannot make any forward progress as rx_busy_skb is never cleared from l2cap_sock_recvmsg(), due to the filter drop verdict over and over coming from sk_filter(). Meanwhile, in l2cap_sock_recv_cb() all new incoming skbs are being dropped due to rx_busy_skb being occupied. Instead, just use __sock_queue_rcv_skb() where an error really tells that there's a receive buffer issue. Split the sk_filter() and enable it for non-segmented modes at queuing time since at this point in time the skb has already been through the ERTM state machine and it has been acked, so dropping is not allowed. Instead, for ERTM and streaming mode, call sk_filter() in l2cap_data_rcv() so the packet can be dropped before the state machine sees it. Fixes: e328140fdacb ("Bluetooth: Use event-driven approach for handling ERTM receive buffer") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-27 18:40:14 +00:00
if (!pskb_may_pull(skb, L2CAP_SDULEN_SIZE))
break;
chan->sdu_len = get_unaligned_le16(skb->data);
skb_pull(skb, L2CAP_SDULEN_SIZE);
if (chan->sdu_len > chan->imtu) {
err = -EMSGSIZE;
break;
}
if (skb->len >= chan->sdu_len)
break;
chan->sdu = skb;
chan->sdu_last_frag = skb;
skb = NULL;
err = 0;
break;
case L2CAP_SAR_CONTINUE:
if (!chan->sdu)
break;
append_skb_frag(chan->sdu, skb,
&chan->sdu_last_frag);
skb = NULL;
if (chan->sdu->len >= chan->sdu_len)
break;
err = 0;
break;
case L2CAP_SAR_END:
if (!chan->sdu)
break;
append_skb_frag(chan->sdu, skb,
&chan->sdu_last_frag);
skb = NULL;
if (chan->sdu->len != chan->sdu_len)
break;
err = chan->ops->recv(chan, chan->sdu);
if (!err) {
/* Reassembly complete */
chan->sdu = NULL;
chan->sdu_last_frag = NULL;
chan->sdu_len = 0;
}
break;
}
if (err) {
kfree_skb(skb);
kfree_skb(chan->sdu);
chan->sdu = NULL;
chan->sdu_last_frag = NULL;
chan->sdu_len = 0;
}
return err;
}
static int l2cap_resegment(struct l2cap_chan *chan)
{
/* Placeholder */
return 0;
}
void l2cap_chan_busy(struct l2cap_chan *chan, int busy)
{
u8 event;
if (chan->mode != L2CAP_MODE_ERTM)
return;
event = busy ? L2CAP_EV_LOCAL_BUSY_DETECTED : L2CAP_EV_LOCAL_BUSY_CLEAR;
l2cap_tx(chan, NULL, NULL, event);
}
static int l2cap_rx_queued_iframes(struct l2cap_chan *chan)
{
int err = 0;
/* Pass sequential frames to l2cap_reassemble_sdu()
* until a gap is encountered.
*/
BT_DBG("chan %p", chan);
while (!test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
struct sk_buff *skb;
BT_DBG("Searching for skb with txseq %d (queue len %d)",
chan->buffer_seq, skb_queue_len(&chan->srej_q));
skb = l2cap_ertm_seq_in_queue(&chan->srej_q, chan->buffer_seq);
if (!skb)
break;
skb_unlink(skb, &chan->srej_q);
chan->buffer_seq = __next_seq(chan, chan->buffer_seq);
err = l2cap_reassemble_sdu(chan, skb, &bt_cb(skb)->l2cap);
if (err)
break;
}
if (skb_queue_empty(&chan->srej_q)) {
chan->rx_state = L2CAP_RX_STATE_RECV;
l2cap_send_ack(chan);
}
return err;
}
static void l2cap_handle_srej(struct l2cap_chan *chan,
struct l2cap_ctrl *control)
{
struct sk_buff *skb;
BT_DBG("chan %p, control %p", chan, control);
if (control->reqseq == chan->next_tx_seq) {
BT_DBG("Invalid reqseq %d, disconnecting", control->reqseq);
l2cap_send_disconn_req(chan, ECONNRESET);
return;
}
skb = l2cap_ertm_seq_in_queue(&chan->tx_q, control->reqseq);
if (skb == NULL) {
BT_DBG("Seq %d not available for retransmission",
control->reqseq);
return;
}
if (chan->max_tx != 0 && bt_cb(skb)->l2cap.retries >= chan->max_tx) {
BT_DBG("Retry limit exceeded (%d)", chan->max_tx);
l2cap_send_disconn_req(chan, ECONNRESET);
return;
}
clear_bit(CONN_REMOTE_BUSY, &chan->conn_state);
if (control->poll) {
l2cap_pass_to_tx(chan, control);
set_bit(CONN_SEND_FBIT, &chan->conn_state);
l2cap_retransmit(chan, control);
l2cap_ertm_send(chan);
if (chan->tx_state == L2CAP_TX_STATE_WAIT_F) {
set_bit(CONN_SREJ_ACT, &chan->conn_state);
chan->srej_save_reqseq = control->reqseq;
}
} else {
l2cap_pass_to_tx_fbit(chan, control);
if (control->final) {
if (chan->srej_save_reqseq != control->reqseq ||
!test_and_clear_bit(CONN_SREJ_ACT,
&chan->conn_state))
l2cap_retransmit(chan, control);
} else {
l2cap_retransmit(chan, control);
if (chan->tx_state == L2CAP_TX_STATE_WAIT_F) {
set_bit(CONN_SREJ_ACT, &chan->conn_state);
chan->srej_save_reqseq = control->reqseq;
}
}
}
}
static void l2cap_handle_rej(struct l2cap_chan *chan,
struct l2cap_ctrl *control)
{
struct sk_buff *skb;
BT_DBG("chan %p, control %p", chan, control);
if (control->reqseq == chan->next_tx_seq) {
BT_DBG("Invalid reqseq %d, disconnecting", control->reqseq);
l2cap_send_disconn_req(chan, ECONNRESET);
return;
}
skb = l2cap_ertm_seq_in_queue(&chan->tx_q, control->reqseq);
if (chan->max_tx && skb &&
bt_cb(skb)->l2cap.retries >= chan->max_tx) {
BT_DBG("Retry limit exceeded (%d)", chan->max_tx);
l2cap_send_disconn_req(chan, ECONNRESET);
return;
}
clear_bit(CONN_REMOTE_BUSY, &chan->conn_state);
l2cap_pass_to_tx(chan, control);
if (control->final) {
if (!test_and_clear_bit(CONN_REJ_ACT, &chan->conn_state))
l2cap_retransmit_all(chan, control);
} else {
l2cap_retransmit_all(chan, control);
l2cap_ertm_send(chan);
if (chan->tx_state == L2CAP_TX_STATE_WAIT_F)
set_bit(CONN_REJ_ACT, &chan->conn_state);
}
}
static u8 l2cap_classify_txseq(struct l2cap_chan *chan, u16 txseq)
{
BT_DBG("chan %p, txseq %d", chan, txseq);
BT_DBG("last_acked_seq %d, expected_tx_seq %d", chan->last_acked_seq,
chan->expected_tx_seq);
if (chan->rx_state == L2CAP_RX_STATE_SREJ_SENT) {
if (__seq_offset(chan, txseq, chan->last_acked_seq) >=
chan->tx_win) {
/* See notes below regarding "double poll" and
* invalid packets.
*/
if (chan->tx_win <= ((chan->tx_win_max + 1) >> 1)) {
BT_DBG("Invalid/Ignore - after SREJ");
return L2CAP_TXSEQ_INVALID_IGNORE;
} else {
BT_DBG("Invalid - in window after SREJ sent");
return L2CAP_TXSEQ_INVALID;
}
}
if (chan->srej_list.head == txseq) {
BT_DBG("Expected SREJ");
return L2CAP_TXSEQ_EXPECTED_SREJ;
}
if (l2cap_ertm_seq_in_queue(&chan->srej_q, txseq)) {
BT_DBG("Duplicate SREJ - txseq already stored");
return L2CAP_TXSEQ_DUPLICATE_SREJ;
}
if (l2cap_seq_list_contains(&chan->srej_list, txseq)) {
BT_DBG("Unexpected SREJ - not requested");
return L2CAP_TXSEQ_UNEXPECTED_SREJ;
}
}
if (chan->expected_tx_seq == txseq) {
if (__seq_offset(chan, txseq, chan->last_acked_seq) >=
chan->tx_win) {
BT_DBG("Invalid - txseq outside tx window");
return L2CAP_TXSEQ_INVALID;
} else {
BT_DBG("Expected");
return L2CAP_TXSEQ_EXPECTED;
}
}
if (__seq_offset(chan, txseq, chan->last_acked_seq) <
__seq_offset(chan, chan->expected_tx_seq, chan->last_acked_seq)) {
BT_DBG("Duplicate - expected_tx_seq later than txseq");
return L2CAP_TXSEQ_DUPLICATE;
}
if (__seq_offset(chan, txseq, chan->last_acked_seq) >= chan->tx_win) {
/* A source of invalid packets is a "double poll" condition,
* where delays cause us to send multiple poll packets. If
* the remote stack receives and processes both polls,
* sequence numbers can wrap around in such a way that a
* resent frame has a sequence number that looks like new data
* with a sequence gap. This would trigger an erroneous SREJ
* request.
*
* Fortunately, this is impossible with a tx window that's
* less than half of the maximum sequence number, which allows
* invalid frames to be safely ignored.
*
* With tx window sizes greater than half of the tx window
* maximum, the frame is invalid and cannot be ignored. This
* causes a disconnect.
*/
if (chan->tx_win <= ((chan->tx_win_max + 1) >> 1)) {
BT_DBG("Invalid/Ignore - txseq outside tx window");
return L2CAP_TXSEQ_INVALID_IGNORE;
} else {
BT_DBG("Invalid - txseq outside tx window");
return L2CAP_TXSEQ_INVALID;
}
} else {
BT_DBG("Unexpected - txseq indicates missing frames");
return L2CAP_TXSEQ_UNEXPECTED;
}
}
static int l2cap_rx_state_recv(struct l2cap_chan *chan,
struct l2cap_ctrl *control,
struct sk_buff *skb, u8 event)
{
int err = 0;
bool skb_in_use = false;
BT_DBG("chan %p, control %p, skb %p, event %d", chan, control, skb,
event);
switch (event) {
case L2CAP_EV_RECV_IFRAME:
switch (l2cap_classify_txseq(chan, control->txseq)) {
case L2CAP_TXSEQ_EXPECTED:
l2cap_pass_to_tx(chan, control);
if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
BT_DBG("Busy, discarding expected seq %d",
control->txseq);
break;
}
chan->expected_tx_seq = __next_seq(chan,
control->txseq);
chan->buffer_seq = chan->expected_tx_seq;
skb_in_use = true;
err = l2cap_reassemble_sdu(chan, skb, control);
if (err)
break;
if (control->final) {
if (!test_and_clear_bit(CONN_REJ_ACT,
&chan->conn_state)) {
control->final = 0;
l2cap_retransmit_all(chan, control);
l2cap_ertm_send(chan);
}
}
if (!test_bit(CONN_LOCAL_BUSY, &chan->conn_state))
l2cap_send_ack(chan);
break;
case L2CAP_TXSEQ_UNEXPECTED:
l2cap_pass_to_tx(chan, control);
/* Can't issue SREJ frames in the local busy state.
* Drop this frame, it will be seen as missing
* when local busy is exited.
*/
if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
BT_DBG("Busy, discarding unexpected seq %d",
control->txseq);
break;
}
/* There was a gap in the sequence, so an SREJ
* must be sent for each missing frame. The
* current frame is stored for later use.
*/
skb_queue_tail(&chan->srej_q, skb);
skb_in_use = true;
BT_DBG("Queued %p (queue len %d)", skb,
skb_queue_len(&chan->srej_q));
clear_bit(CONN_SREJ_ACT, &chan->conn_state);
l2cap_seq_list_clear(&chan->srej_list);
l2cap_send_srej(chan, control->txseq);
chan->rx_state = L2CAP_RX_STATE_SREJ_SENT;
break;
case L2CAP_TXSEQ_DUPLICATE:
l2cap_pass_to_tx(chan, control);
break;
case L2CAP_TXSEQ_INVALID_IGNORE:
break;
case L2CAP_TXSEQ_INVALID:
default:
l2cap_send_disconn_req(chan, ECONNRESET);
break;
}
break;
case L2CAP_EV_RECV_RR:
l2cap_pass_to_tx(chan, control);
if (control->final) {
clear_bit(CONN_REMOTE_BUSY, &chan->conn_state);
if (!test_and_clear_bit(CONN_REJ_ACT, &chan->conn_state) &&
!__chan_is_moving(chan)) {
control->final = 0;
l2cap_retransmit_all(chan, control);
}
l2cap_ertm_send(chan);
} else if (control->poll) {
l2cap_send_i_or_rr_or_rnr(chan);
} else {
if (test_and_clear_bit(CONN_REMOTE_BUSY,
&chan->conn_state) &&
chan->unacked_frames)
__set_retrans_timer(chan);
l2cap_ertm_send(chan);
}
break;
case L2CAP_EV_RECV_RNR:
set_bit(CONN_REMOTE_BUSY, &chan->conn_state);
l2cap_pass_to_tx(chan, control);
if (control && control->poll) {
set_bit(CONN_SEND_FBIT, &chan->conn_state);
l2cap_send_rr_or_rnr(chan, 0);
}
__clear_retrans_timer(chan);
l2cap_seq_list_clear(&chan->retrans_list);
break;
case L2CAP_EV_RECV_REJ:
l2cap_handle_rej(chan, control);
break;
case L2CAP_EV_RECV_SREJ:
l2cap_handle_srej(chan, control);
break;
default:
break;
}
if (skb && !skb_in_use) {
BT_DBG("Freeing %p", skb);
kfree_skb(skb);
}
return err;
}
static int l2cap_rx_state_srej_sent(struct l2cap_chan *chan,
struct l2cap_ctrl *control,
struct sk_buff *skb, u8 event)
{
int err = 0;
u16 txseq = control->txseq;
bool skb_in_use = false;
BT_DBG("chan %p, control %p, skb %p, event %d", chan, control, skb,
event);
switch (event) {
case L2CAP_EV_RECV_IFRAME:
switch (l2cap_classify_txseq(chan, txseq)) {
case L2CAP_TXSEQ_EXPECTED:
/* Keep frame for reassembly later */
l2cap_pass_to_tx(chan, control);
skb_queue_tail(&chan->srej_q, skb);
skb_in_use = true;
BT_DBG("Queued %p (queue len %d)", skb,
skb_queue_len(&chan->srej_q));
chan->expected_tx_seq = __next_seq(chan, txseq);
break;
case L2CAP_TXSEQ_EXPECTED_SREJ:
l2cap_seq_list_pop(&chan->srej_list);
l2cap_pass_to_tx(chan, control);
skb_queue_tail(&chan->srej_q, skb);
skb_in_use = true;
BT_DBG("Queued %p (queue len %d)", skb,
skb_queue_len(&chan->srej_q));
err = l2cap_rx_queued_iframes(chan);
if (err)
break;
break;
case L2CAP_TXSEQ_UNEXPECTED:
/* Got a frame that can't be reassembled yet.
* Save it for later, and send SREJs to cover
* the missing frames.
*/
skb_queue_tail(&chan->srej_q, skb);
skb_in_use = true;
BT_DBG("Queued %p (queue len %d)", skb,
skb_queue_len(&chan->srej_q));
l2cap_pass_to_tx(chan, control);
l2cap_send_srej(chan, control->txseq);
break;
case L2CAP_TXSEQ_UNEXPECTED_SREJ:
/* This frame was requested with an SREJ, but
* some expected retransmitted frames are
* missing. Request retransmission of missing
* SREJ'd frames.
*/
skb_queue_tail(&chan->srej_q, skb);
skb_in_use = true;
BT_DBG("Queued %p (queue len %d)", skb,
skb_queue_len(&chan->srej_q));
l2cap_pass_to_tx(chan, control);
l2cap_send_srej_list(chan, control->txseq);
break;
case L2CAP_TXSEQ_DUPLICATE_SREJ:
/* We've already queued this frame. Drop this copy. */
l2cap_pass_to_tx(chan, control);
break;
case L2CAP_TXSEQ_DUPLICATE:
/* Expecting a later sequence number, so this frame
* was already received. Ignore it completely.
*/
break;
case L2CAP_TXSEQ_INVALID_IGNORE:
break;
case L2CAP_TXSEQ_INVALID:
default:
l2cap_send_disconn_req(chan, ECONNRESET);
break;
}
break;
case L2CAP_EV_RECV_RR:
l2cap_pass_to_tx(chan, control);
if (control->final) {
clear_bit(CONN_REMOTE_BUSY, &chan->conn_state);
if (!test_and_clear_bit(CONN_REJ_ACT,
&chan->conn_state)) {
control->final = 0;
l2cap_retransmit_all(chan, control);
}
l2cap_ertm_send(chan);
} else if (control->poll) {
if (test_and_clear_bit(CONN_REMOTE_BUSY,
&chan->conn_state) &&
chan->unacked_frames) {
__set_retrans_timer(chan);
}
set_bit(CONN_SEND_FBIT, &chan->conn_state);
l2cap_send_srej_tail(chan);
} else {
if (test_and_clear_bit(CONN_REMOTE_BUSY,
&chan->conn_state) &&
chan->unacked_frames)
__set_retrans_timer(chan);
l2cap_send_ack(chan);
}
break;
case L2CAP_EV_RECV_RNR:
set_bit(CONN_REMOTE_BUSY, &chan->conn_state);
l2cap_pass_to_tx(chan, control);
if (control->poll) {
l2cap_send_srej_tail(chan);
} else {
struct l2cap_ctrl rr_control;
memset(&rr_control, 0, sizeof(rr_control));
rr_control.sframe = 1;
rr_control.super = L2CAP_SUPER_RR;
rr_control.reqseq = chan->buffer_seq;
l2cap_send_sframe(chan, &rr_control);
}
break;
case L2CAP_EV_RECV_REJ:
l2cap_handle_rej(chan, control);
break;
case L2CAP_EV_RECV_SREJ:
l2cap_handle_srej(chan, control);
break;
}
if (skb && !skb_in_use) {
BT_DBG("Freeing %p", skb);
kfree_skb(skb);
}
return err;
}
static int l2cap_finish_move(struct l2cap_chan *chan)
{
BT_DBG("chan %p", chan);
chan->rx_state = L2CAP_RX_STATE_RECV;
if (chan->hs_hcon)
chan->conn->mtu = chan->hs_hcon->hdev->block_mtu;
else
chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
return l2cap_resegment(chan);
}
static int l2cap_rx_state_wait_p(struct l2cap_chan *chan,
struct l2cap_ctrl *control,
struct sk_buff *skb, u8 event)
{
int err;
BT_DBG("chan %p, control %p, skb %p, event %d", chan, control, skb,
event);
if (!control->poll)
return -EPROTO;
l2cap_process_reqseq(chan, control->reqseq);
if (!skb_queue_empty(&chan->tx_q))
chan->tx_send_head = skb_peek(&chan->tx_q);
else
chan->tx_send_head = NULL;
/* Rewind next_tx_seq to the point expected
* by the receiver.
*/
chan->next_tx_seq = control->reqseq;
chan->unacked_frames = 0;
err = l2cap_finish_move(chan);
if (err)
return err;
set_bit(CONN_SEND_FBIT, &chan->conn_state);
l2cap_send_i_or_rr_or_rnr(chan);
if (event == L2CAP_EV_RECV_IFRAME)
return -EPROTO;
return l2cap_rx_state_recv(chan, control, NULL, event);
}
static int l2cap_rx_state_wait_f(struct l2cap_chan *chan,
struct l2cap_ctrl *control,
struct sk_buff *skb, u8 event)
{
int err;
if (!control->final)
return -EPROTO;
clear_bit(CONN_REMOTE_BUSY, &chan->conn_state);
chan->rx_state = L2CAP_RX_STATE_RECV;
l2cap_process_reqseq(chan, control->reqseq);
if (!skb_queue_empty(&chan->tx_q))
chan->tx_send_head = skb_peek(&chan->tx_q);
else
chan->tx_send_head = NULL;
/* Rewind next_tx_seq to the point expected
* by the receiver.
*/
chan->next_tx_seq = control->reqseq;
chan->unacked_frames = 0;
if (chan->hs_hcon)
chan->conn->mtu = chan->hs_hcon->hdev->block_mtu;
else
chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
err = l2cap_resegment(chan);
if (!err)
err = l2cap_rx_state_recv(chan, control, skb, event);
return err;
}
static bool __valid_reqseq(struct l2cap_chan *chan, u16 reqseq)
{
/* Make sure reqseq is for a packet that has been sent but not acked */
u16 unacked;
unacked = __seq_offset(chan, chan->next_tx_seq, chan->expected_ack_seq);
return __seq_offset(chan, chan->next_tx_seq, reqseq) <= unacked;
}
static int l2cap_rx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
struct sk_buff *skb, u8 event)
{
int err = 0;
BT_DBG("chan %p, control %p, skb %p, event %d, state %d", chan,
control, skb, event, chan->rx_state);
if (__valid_reqseq(chan, control->reqseq)) {
switch (chan->rx_state) {
case L2CAP_RX_STATE_RECV:
err = l2cap_rx_state_recv(chan, control, skb, event);
break;
case L2CAP_RX_STATE_SREJ_SENT:
err = l2cap_rx_state_srej_sent(chan, control, skb,
event);
break;
case L2CAP_RX_STATE_WAIT_P:
err = l2cap_rx_state_wait_p(chan, control, skb, event);
break;
case L2CAP_RX_STATE_WAIT_F:
err = l2cap_rx_state_wait_f(chan, control, skb, event);
break;
default:
/* shut it down */
break;
}
} else {
BT_DBG("Invalid reqseq %d (next_tx_seq %d, expected_ack_seq %d",
control->reqseq, chan->next_tx_seq,
chan->expected_ack_seq);
l2cap_send_disconn_req(chan, ECONNRESET);
}
return err;
}
static int l2cap_stream_rx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
struct sk_buff *skb)
{
BT_DBG("chan %p, control %p, skb %p, state %d", chan, control, skb,
chan->rx_state);
if (l2cap_classify_txseq(chan, control->txseq) ==
L2CAP_TXSEQ_EXPECTED) {
l2cap_pass_to_tx(chan, control);
BT_DBG("buffer_seq %d->%d", chan->buffer_seq,
__next_seq(chan, chan->buffer_seq));
chan->buffer_seq = __next_seq(chan, chan->buffer_seq);
l2cap_reassemble_sdu(chan, skb, control);
} else {
if (chan->sdu) {
kfree_skb(chan->sdu);
chan->sdu = NULL;
}
chan->sdu_last_frag = NULL;
chan->sdu_len = 0;
if (skb) {
BT_DBG("Freeing %p", skb);
kfree_skb(skb);
}
}
chan->last_acked_seq = control->txseq;
chan->expected_tx_seq = __next_seq(chan, control->txseq);
return 0;
}
static int l2cap_data_rcv(struct l2cap_chan *chan, struct sk_buff *skb)
{
struct l2cap_ctrl *control = &bt_cb(skb)->l2cap;
u16 len;
u8 event;
__unpack_control(chan, skb);
len = skb->len;
/*
* We can just drop the corrupted I-frame here.
* Receiver will miss it and start proper recovery
* procedures and ask for retransmission.
*/
if (l2cap_check_fcs(chan, skb))
goto drop;
if (!control->sframe && control->sar == L2CAP_SAR_START)
len -= L2CAP_SDULEN_SIZE;
if (chan->fcs == L2CAP_FCS_CRC16)
len -= L2CAP_FCS_SIZE;
if (len > chan->mps) {
l2cap_send_disconn_req(chan, ECONNRESET);
goto drop;
}
Bluetooth: split sk_filter in l2cap_sock_recv_cb During an audit for sk_filter(), we found that rx_busy_skb handling in l2cap_sock_recv_cb() and l2cap_sock_recvmsg() looks not quite as intended. The assumption from commit e328140fdacb ("Bluetooth: Use event-driven approach for handling ERTM receive buffer") is that errors returned from sock_queue_rcv_skb() are due to receive buffer shortage. However, nothing should prevent doing a setsockopt() with SO_ATTACH_FILTER on the socket, that could drop some of the incoming skbs when handled in sock_queue_rcv_skb(). In that case sock_queue_rcv_skb() will return with -EPERM, propagated from sk_filter() and if in L2CAP_MODE_ERTM mode, wrong assumption was that we failed due to receive buffer being full. From that point onwards, due to the to-be-dropped skb being held in rx_busy_skb, we cannot make any forward progress as rx_busy_skb is never cleared from l2cap_sock_recvmsg(), due to the filter drop verdict over and over coming from sk_filter(). Meanwhile, in l2cap_sock_recv_cb() all new incoming skbs are being dropped due to rx_busy_skb being occupied. Instead, just use __sock_queue_rcv_skb() where an error really tells that there's a receive buffer issue. Split the sk_filter() and enable it for non-segmented modes at queuing time since at this point in time the skb has already been through the ERTM state machine and it has been acked, so dropping is not allowed. Instead, for ERTM and streaming mode, call sk_filter() in l2cap_data_rcv() so the packet can be dropped before the state machine sees it. Fixes: e328140fdacb ("Bluetooth: Use event-driven approach for handling ERTM receive buffer") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-27 18:40:14 +00:00
if ((chan->mode == L2CAP_MODE_ERTM ||
chan->mode == L2CAP_MODE_STREAMING) && sk_filter(chan->data, skb))
goto drop;
if (!control->sframe) {
int err;
BT_DBG("iframe sar %d, reqseq %d, final %d, txseq %d",
control->sar, control->reqseq, control->final,
control->txseq);
/* Validate F-bit - F=0 always valid, F=1 only
* valid in TX WAIT_F
*/
if (control->final && chan->tx_state != L2CAP_TX_STATE_WAIT_F)
goto drop;
if (chan->mode != L2CAP_MODE_STREAMING) {
event = L2CAP_EV_RECV_IFRAME;
err = l2cap_rx(chan, control, skb, event);
} else {
err = l2cap_stream_rx(chan, control, skb);
}
if (err)
l2cap_send_disconn_req(chan, ECONNRESET);
} else {
const u8 rx_func_to_event[4] = {
L2CAP_EV_RECV_RR, L2CAP_EV_RECV_REJ,
L2CAP_EV_RECV_RNR, L2CAP_EV_RECV_SREJ
};
/* Only I-frames are expected in streaming mode */
if (chan->mode == L2CAP_MODE_STREAMING)
goto drop;
BT_DBG("sframe reqseq %d, final %d, poll %d, super %d",
control->reqseq, control->final, control->poll,
control->super);
if (len != 0) {
BT_ERR("Trailing bytes: %d in sframe", len);
l2cap_send_disconn_req(chan, ECONNRESET);
goto drop;
}
/* Validate F and P bits */
if (control->final && (control->poll ||
chan->tx_state != L2CAP_TX_STATE_WAIT_F))
goto drop;
event = rx_func_to_event[control->super];
if (l2cap_rx(chan, control, skb, event))
l2cap_send_disconn_req(chan, ECONNRESET);
}
return 0;
drop:
kfree_skb(skb);
return 0;
}
static void l2cap_chan_le_send_credits(struct l2cap_chan *chan)
{
struct l2cap_conn *conn = chan->conn;
struct l2cap_le_credits pkt;
u16 return_credits;
/* We return more credits to the sender only after the amount of
* credits falls below half of the initial amount.
*/
if (chan->rx_credits >= (le_max_credits + 1) / 2)
return;
return_credits = le_max_credits - chan->rx_credits;
BT_DBG("chan %p returning %u credits to sender", chan, return_credits);
chan->rx_credits += return_credits;
pkt.cid = cpu_to_le16(chan->scid);
pkt.credits = cpu_to_le16(return_credits);
chan->ident = l2cap_get_ident(conn);
l2cap_send_cmd(conn, chan->ident, L2CAP_LE_CREDITS, sizeof(pkt), &pkt);
}
static int l2cap_le_data_rcv(struct l2cap_chan *chan, struct sk_buff *skb)
{
int err;
if (!chan->rx_credits) {
BT_ERR("No credits to receive LE L2CAP data");
l2cap_send_disconn_req(chan, ECONNRESET);
return -ENOBUFS;
}
if (chan->imtu < skb->len) {
BT_ERR("Too big LE L2CAP PDU");
return -ENOBUFS;
}
chan->rx_credits--;
BT_DBG("rx_credits %u -> %u", chan->rx_credits + 1, chan->rx_credits);
l2cap_chan_le_send_credits(chan);
err = 0;
if (!chan->sdu) {
u16 sdu_len;
sdu_len = get_unaligned_le16(skb->data);
skb_pull(skb, L2CAP_SDULEN_SIZE);
BT_DBG("Start of new SDU. sdu_len %u skb->len %u imtu %u",
sdu_len, skb->len, chan->imtu);
if (sdu_len > chan->imtu) {
BT_ERR("Too big LE L2CAP SDU length received");
err = -EMSGSIZE;
goto failed;
}
if (skb->len > sdu_len) {
BT_ERR("Too much LE L2CAP data received");
err = -EINVAL;
goto failed;
}
if (skb->len == sdu_len)
return chan->ops->recv(chan, skb);
chan->sdu = skb;
chan->sdu_len = sdu_len;
chan->sdu_last_frag = skb;
return 0;
}
BT_DBG("SDU fragment. chan->sdu->len %u skb->len %u chan->sdu_len %u",
chan->sdu->len, skb->len, chan->sdu_len);
if (chan->sdu->len + skb->len > chan->sdu_len) {
BT_ERR("Too much LE L2CAP data received");
err = -EINVAL;
goto failed;
}
append_skb_frag(chan->sdu, skb, &chan->sdu_last_frag);
skb = NULL;
if (chan->sdu->len == chan->sdu_len) {
err = chan->ops->recv(chan, chan->sdu);
if (!err) {
chan->sdu = NULL;
chan->sdu_last_frag = NULL;
chan->sdu_len = 0;
}
}
failed:
if (err) {
kfree_skb(skb);
kfree_skb(chan->sdu);
chan->sdu = NULL;
chan->sdu_last_frag = NULL;
chan->sdu_len = 0;
}
/* We can't return an error here since we took care of the skb
* freeing internally. An error return would cause the caller to
* do a double-free of the skb.
*/
return 0;
}
static void l2cap_data_channel(struct l2cap_conn *conn, u16 cid,
struct sk_buff *skb)
{
struct l2cap_chan *chan;
chan = l2cap_get_chan_by_scid(conn, cid);
if (!chan) {
if (cid == L2CAP_CID_A2MP) {
chan = a2mp_channel_create(conn, skb);
if (!chan) {
kfree_skb(skb);
return;
}
l2cap_chan_lock(chan);
} else {
BT_DBG("unknown cid 0x%4.4x", cid);
/* Drop packet and return */
kfree_skb(skb);
return;
}
}
BT_DBG("chan %p, len %d", chan, skb->len);
/* If we receive data on a fixed channel before the info req/rsp
* procdure is done simply assume that the channel is supported
* and mark it as ready.
*/
if (chan->chan_type == L2CAP_CHAN_FIXED)
l2cap_chan_ready(chan);
if (chan->state != BT_CONNECTED)
goto drop;
switch (chan->mode) {
case L2CAP_MODE_LE_FLOWCTL:
if (l2cap_le_data_rcv(chan, skb) < 0)
goto drop;
goto done;
case L2CAP_MODE_BASIC:
/* If socket recv buffers overflows we drop data here
* which is *bad* because L2CAP has to be reliable.
* But we don't have any other choice. L2CAP doesn't
* provide flow control mechanism. */
if (chan->imtu < skb->len) {
BT_ERR("Dropping L2CAP data: receive buffer overflow");
goto drop;
}
if (!chan->ops->recv(chan, skb))
goto done;
break;
case L2CAP_MODE_ERTM:
case L2CAP_MODE_STREAMING:
l2cap_data_rcv(chan, skb);
goto done;
default:
BT_DBG("chan %p: bad mode 0x%2.2x", chan, chan->mode);
break;
}
drop:
kfree_skb(skb);
done:
l2cap_chan_unlock(chan);
}
static void l2cap_conless_channel(struct l2cap_conn *conn, __le16 psm,
struct sk_buff *skb)
{
struct hci_conn *hcon = conn->hcon;
struct l2cap_chan *chan;
if (hcon->type != ACL_LINK)
goto free_skb;
chan = l2cap_global_chan_by_psm(0, psm, &hcon->src, &hcon->dst,
ACL_LINK);
if (!chan)
goto free_skb;
BT_DBG("chan %p, len %d", chan, skb->len);
if (chan->state != BT_BOUND && chan->state != BT_CONNECTED)
goto drop;
if (chan->imtu < skb->len)
goto drop;
/* Store remote BD_ADDR and PSM for msg_name */
bacpy(&bt_cb(skb)->l2cap.bdaddr, &hcon->dst);
bt_cb(skb)->l2cap.psm = psm;
if (!chan->ops->recv(chan, skb)) {
l2cap_chan_put(chan);
return;
}
drop:
l2cap_chan_put(chan);
free_skb:
kfree_skb(skb);
}
static void l2cap_recv_frame(struct l2cap_conn *conn, struct sk_buff *skb)
{
struct l2cap_hdr *lh = (void *) skb->data;
struct hci_conn *hcon = conn->hcon;
u16 cid, len;
__le16 psm;
if (hcon->state != BT_CONNECTED) {
BT_DBG("queueing pending rx skb");
skb_queue_tail(&conn->pending_rx, skb);
return;
}
skb_pull(skb, L2CAP_HDR_SIZE);
cid = __le16_to_cpu(lh->cid);
len = __le16_to_cpu(lh->len);
if (len != skb->len) {
kfree_skb(skb);
return;
}
/* Since we can't actively block incoming LE connections we must
* at least ensure that we ignore incoming data from them.
*/
if (hcon->type == LE_LINK &&
hci_bdaddr_list_lookup(&hcon->hdev->blacklist, &hcon->dst,
bdaddr_dst_type(hcon))) {
kfree_skb(skb);
return;
}
BT_DBG("len %d, cid 0x%4.4x", len, cid);
switch (cid) {
case L2CAP_CID_SIGNALING:
l2cap_sig_channel(conn, skb);
break;
case L2CAP_CID_CONN_LESS:
psm = get_unaligned((__le16 *) skb->data);
skb_pull(skb, L2CAP_PSMLEN_SIZE);
l2cap_conless_channel(conn, psm, skb);
break;
case L2CAP_CID_LE_SIGNALING:
l2cap_le_sig_channel(conn, skb);
break;
default:
l2cap_data_channel(conn, cid, skb);
break;
}
}
static void process_pending_rx(struct work_struct *work)
{
struct l2cap_conn *conn = container_of(work, struct l2cap_conn,
pending_rx_work);
struct sk_buff *skb;
BT_DBG("");
while ((skb = skb_dequeue(&conn->pending_rx)))
l2cap_recv_frame(conn, skb);
}
static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon)
{
struct l2cap_conn *conn = hcon->l2cap_data;
struct hci_chan *hchan;
if (conn)
return conn;
hchan = hci_chan_create(hcon);
if (!hchan)
return NULL;
conn = kzalloc(sizeof(*conn), GFP_KERNEL);
if (!conn) {
hci_chan_del(hchan);
return NULL;
}
kref_init(&conn->ref);
hcon->l2cap_data = conn;
conn->hcon = hci_conn_get(hcon);
conn->hchan = hchan;
BT_DBG("hcon %p conn %p hchan %p", hcon, conn, hchan);
switch (hcon->type) {
case LE_LINK:
if (hcon->hdev->le_mtu) {
conn->mtu = hcon->hdev->le_mtu;
break;
}
/* fall through */
default:
conn->mtu = hcon->hdev->acl_mtu;
break;
}
conn->feat_mask = 0;
conn->local_fixed_chan = L2CAP_FC_SIG_BREDR | L2CAP_FC_CONNLESS;
if (hcon->type == ACL_LINK &&
hci_dev_test_flag(hcon->hdev, HCI_HS_ENABLED))
conn->local_fixed_chan |= L2CAP_FC_A2MP;
if (hci_dev_test_flag(hcon->hdev, HCI_LE_ENABLED) &&
(bredr_sc_enabled(hcon->hdev) ||
hci_dev_test_flag(hcon->hdev, HCI_FORCE_BREDR_SMP)))
conn->local_fixed_chan |= L2CAP_FC_SMP_BREDR;
mutex_init(&conn->ident_lock);
mutex_init(&conn->chan_lock);
INIT_LIST_HEAD(&conn->chan_l);
INIT_LIST_HEAD(&conn->users);
INIT_DELAYED_WORK(&conn->info_timer, l2cap_info_timeout);
skb_queue_head_init(&conn->pending_rx);
INIT_WORK(&conn->pending_rx_work, process_pending_rx);
INIT_WORK(&conn->id_addr_update_work, l2cap_conn_update_id_addr);
conn->disc_reason = HCI_ERROR_REMOTE_USER_TERM;
return conn;
}
static bool is_valid_psm(u16 psm, u8 dst_type) {
if (!psm)
return false;
if (bdaddr_type_is_le(dst_type))
return (psm <= 0x00ff);
/* PSM must be odd and lsb of upper byte must be 0 */
return ((psm & 0x0101) == 0x0001);
}
int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
bdaddr_t *dst, u8 dst_type)
{
struct l2cap_conn *conn;
struct hci_conn *hcon;
struct hci_dev *hdev;
int err;
BT_DBG("%pMR -> %pMR (type %u) psm 0x%2.2x", &chan->src, dst,
dst_type, __le16_to_cpu(psm));
hdev = hci_get_route(dst, &chan->src, chan->src_type);
if (!hdev)
return -EHOSTUNREACH;
hci_dev_lock(hdev);
if (!is_valid_psm(__le16_to_cpu(psm), dst_type) && !cid &&
chan->chan_type != L2CAP_CHAN_RAW) {
err = -EINVAL;
goto done;
}
if (chan->chan_type == L2CAP_CHAN_CONN_ORIENTED && !psm) {
err = -EINVAL;
goto done;
}
if (chan->chan_type == L2CAP_CHAN_FIXED && !cid) {
err = -EINVAL;
goto done;
}
switch (chan->mode) {
case L2CAP_MODE_BASIC:
break;
case L2CAP_MODE_LE_FLOWCTL:
l2cap_le_flowctl_init(chan);
break;
case L2CAP_MODE_ERTM:
case L2CAP_MODE_STREAMING:
if (!disable_ertm)
break;
/* fall through */
default:
err = -EOPNOTSUPP;
goto done;
}
switch (chan->state) {
case BT_CONNECT:
case BT_CONNECT2:
case BT_CONFIG:
/* Already connecting */
err = 0;
goto done;
case BT_CONNECTED:
/* Already connected */
err = -EISCONN;
goto done;
case BT_OPEN:
case BT_BOUND:
/* Can connect */
break;
default:
err = -EBADFD;
goto done;
}
/* Set destination address and psm */
bacpy(&chan->dst, dst);
chan->dst_type = dst_type;
chan->psm = psm;
chan->dcid = cid;
if (bdaddr_type_is_le(dst_type)) {
/* Convert from L2CAP channel address type to HCI address type
*/
if (dst_type == BDADDR_LE_PUBLIC)
dst_type = ADDR_LE_DEV_PUBLIC;
else
dst_type = ADDR_LE_DEV_RANDOM;
if (hci_dev_test_flag(hdev, HCI_ADVERTISING))
hcon = hci_connect_le(hdev, dst, dst_type,
chan->sec_level,
HCI_LE_CONN_TIMEOUT,
HCI_ROLE_SLAVE);
else
hcon = hci_connect_le_scan(hdev, dst, dst_type,
chan->sec_level,
HCI_LE_CONN_TIMEOUT);
} else {
u8 auth_type = l2cap_get_auth_type(chan);
hcon = hci_connect_acl(hdev, dst, chan->sec_level, auth_type);
}
if (IS_ERR(hcon)) {
err = PTR_ERR(hcon);
goto done;
}
conn = l2cap_conn_add(hcon);
if (!conn) {
hci_conn_drop(hcon);
err = -ENOMEM;
goto done;
}
Bluetooth: Fix lockdep warning with l2cap_chan_connect The L2CAP connection's channel list lock (conn->chan_lock) must never be taken while already holding a channel lock (chan->lock) in order to avoid lock-inversion and lockdep warnings. So far the l2cap_chan_connect function has acquired the chan->lock early in the function and then later called l2cap_chan_add(conn, chan) which will try to take the conn->chan_lock. This violates the correct order of taking the locks and may lead to the following type of lockdep warnings: -> #1 (&conn->chan_lock){+.+...}: [<c109324d>] lock_acquire+0x9d/0x140 [<c188459c>] mutex_lock_nested+0x6c/0x420 [<d0aab48e>] l2cap_chan_add+0x1e/0x40 [bluetooth] [<d0aac618>] l2cap_chan_connect+0x348/0x8f0 [bluetooth] [<d0cc9a91>] lowpan_control_write+0x221/0x2d0 [bluetooth_6lowpan] -> #0 (&chan->lock){+.+.+.}: [<c10928d8>] __lock_acquire+0x1a18/0x1d20 [<c109324d>] lock_acquire+0x9d/0x140 [<c188459c>] mutex_lock_nested+0x6c/0x420 [<d0ab05fd>] l2cap_connect_cfm+0x1dd/0x3f0 [bluetooth] [<d0a909c4>] hci_le_meta_evt+0x11a4/0x1260 [bluetooth] [<d0a910eb>] hci_event_packet+0x3ab/0x3120 [bluetooth] [<d0a7cb08>] hci_rx_work+0x208/0x4a0 [bluetooth] CPU0 CPU1 ---- ---- lock(&conn->chan_lock); lock(&chan->lock); lock(&conn->chan_lock); lock(&chan->lock); Before calling l2cap_chan_add() the channel is not part of the conn->chan_l list, and can therefore only be accessed by the L2CAP user (such as l2cap_sock.c). We can therefore assume that it is the responsibility of the user to handle mutual exclusion until this point (which we can see is already true in l2cap_sock.c by it in many places touching chan members without holding chan->lock). Since the hci_conn and by exctension l2cap_conn creation in the l2cap_chan_connect() function depend on chan details we cannot simply add a mutex_lock(&conn->chan_lock) in the beginning of the function (since the conn object doesn't yet exist there). What we can do however is move the chan->lock taking later into the function where we already have the conn object and can that way take conn->chan_lock first. This patch implements the above strategy and does some other necessary changes such as using __l2cap_chan_add() which assumes conn->chan_lock is held, as well as adding a second needed label so the unlocking happens as it should. Reported-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-02 07:16:22 +00:00
mutex_lock(&conn->chan_lock);
l2cap_chan_lock(chan);
if (cid && __l2cap_get_chan_by_dcid(conn, cid)) {
hci_conn_drop(hcon);
err = -EBUSY;
Bluetooth: Fix lockdep warning with l2cap_chan_connect The L2CAP connection's channel list lock (conn->chan_lock) must never be taken while already holding a channel lock (chan->lock) in order to avoid lock-inversion and lockdep warnings. So far the l2cap_chan_connect function has acquired the chan->lock early in the function and then later called l2cap_chan_add(conn, chan) which will try to take the conn->chan_lock. This violates the correct order of taking the locks and may lead to the following type of lockdep warnings: -> #1 (&conn->chan_lock){+.+...}: [<c109324d>] lock_acquire+0x9d/0x140 [<c188459c>] mutex_lock_nested+0x6c/0x420 [<d0aab48e>] l2cap_chan_add+0x1e/0x40 [bluetooth] [<d0aac618>] l2cap_chan_connect+0x348/0x8f0 [bluetooth] [<d0cc9a91>] lowpan_control_write+0x221/0x2d0 [bluetooth_6lowpan] -> #0 (&chan->lock){+.+.+.}: [<c10928d8>] __lock_acquire+0x1a18/0x1d20 [<c109324d>] lock_acquire+0x9d/0x140 [<c188459c>] mutex_lock_nested+0x6c/0x420 [<d0ab05fd>] l2cap_connect_cfm+0x1dd/0x3f0 [bluetooth] [<d0a909c4>] hci_le_meta_evt+0x11a4/0x1260 [bluetooth] [<d0a910eb>] hci_event_packet+0x3ab/0x3120 [bluetooth] [<d0a7cb08>] hci_rx_work+0x208/0x4a0 [bluetooth] CPU0 CPU1 ---- ---- lock(&conn->chan_lock); lock(&chan->lock); lock(&conn->chan_lock); lock(&chan->lock); Before calling l2cap_chan_add() the channel is not part of the conn->chan_l list, and can therefore only be accessed by the L2CAP user (such as l2cap_sock.c). We can therefore assume that it is the responsibility of the user to handle mutual exclusion until this point (which we can see is already true in l2cap_sock.c by it in many places touching chan members without holding chan->lock). Since the hci_conn and by exctension l2cap_conn creation in the l2cap_chan_connect() function depend on chan details we cannot simply add a mutex_lock(&conn->chan_lock) in the beginning of the function (since the conn object doesn't yet exist there). What we can do however is move the chan->lock taking later into the function where we already have the conn object and can that way take conn->chan_lock first. This patch implements the above strategy and does some other necessary changes such as using __l2cap_chan_add() which assumes conn->chan_lock is held, as well as adding a second needed label so the unlocking happens as it should. Reported-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-02 07:16:22 +00:00
goto chan_unlock;
}
/* Update source addr of the socket */
bacpy(&chan->src, &hcon->src);
chan->src_type = bdaddr_src_type(hcon);
Bluetooth: Fix lockdep warning with l2cap_chan_connect The L2CAP connection's channel list lock (conn->chan_lock) must never be taken while already holding a channel lock (chan->lock) in order to avoid lock-inversion and lockdep warnings. So far the l2cap_chan_connect function has acquired the chan->lock early in the function and then later called l2cap_chan_add(conn, chan) which will try to take the conn->chan_lock. This violates the correct order of taking the locks and may lead to the following type of lockdep warnings: -> #1 (&conn->chan_lock){+.+...}: [<c109324d>] lock_acquire+0x9d/0x140 [<c188459c>] mutex_lock_nested+0x6c/0x420 [<d0aab48e>] l2cap_chan_add+0x1e/0x40 [bluetooth] [<d0aac618>] l2cap_chan_connect+0x348/0x8f0 [bluetooth] [<d0cc9a91>] lowpan_control_write+0x221/0x2d0 [bluetooth_6lowpan] -> #0 (&chan->lock){+.+.+.}: [<c10928d8>] __lock_acquire+0x1a18/0x1d20 [<c109324d>] lock_acquire+0x9d/0x140 [<c188459c>] mutex_lock_nested+0x6c/0x420 [<d0ab05fd>] l2cap_connect_cfm+0x1dd/0x3f0 [bluetooth] [<d0a909c4>] hci_le_meta_evt+0x11a4/0x1260 [bluetooth] [<d0a910eb>] hci_event_packet+0x3ab/0x3120 [bluetooth] [<d0a7cb08>] hci_rx_work+0x208/0x4a0 [bluetooth] CPU0 CPU1 ---- ---- lock(&conn->chan_lock); lock(&chan->lock); lock(&conn->chan_lock); lock(&chan->lock); Before calling l2cap_chan_add() the channel is not part of the conn->chan_l list, and can therefore only be accessed by the L2CAP user (such as l2cap_sock.c). We can therefore assume that it is the responsibility of the user to handle mutual exclusion until this point (which we can see is already true in l2cap_sock.c by it in many places touching chan members without holding chan->lock). Since the hci_conn and by exctension l2cap_conn creation in the l2cap_chan_connect() function depend on chan details we cannot simply add a mutex_lock(&conn->chan_lock) in the beginning of the function (since the conn object doesn't yet exist there). What we can do however is move the chan->lock taking later into the function where we already have the conn object and can that way take conn->chan_lock first. This patch implements the above strategy and does some other necessary changes such as using __l2cap_chan_add() which assumes conn->chan_lock is held, as well as adding a second needed label so the unlocking happens as it should. Reported-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-02 07:16:22 +00:00
__l2cap_chan_add(conn, chan);
/* l2cap_chan_add takes its own ref so we can drop this one */
hci_conn_drop(hcon);
l2cap_state_change(chan, BT_CONNECT);
__set_chan_timer(chan, chan->ops->get_sndtimeo(chan));
/* Release chan->sport so that it can be reused by other
* sockets (as it's only used for listening sockets).
*/
write_lock(&chan_list_lock);
chan->sport = 0;
write_unlock(&chan_list_lock);
if (hcon->state == BT_CONNECTED) {
if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
__clear_chan_timer(chan);
if (l2cap_chan_check_security(chan, true))
l2cap_state_change(chan, BT_CONNECTED);
} else
l2cap_do_start(chan);
}
err = 0;
Bluetooth: Fix lockdep warning with l2cap_chan_connect The L2CAP connection's channel list lock (conn->chan_lock) must never be taken while already holding a channel lock (chan->lock) in order to avoid lock-inversion and lockdep warnings. So far the l2cap_chan_connect function has acquired the chan->lock early in the function and then later called l2cap_chan_add(conn, chan) which will try to take the conn->chan_lock. This violates the correct order of taking the locks and may lead to the following type of lockdep warnings: -> #1 (&conn->chan_lock){+.+...}: [<c109324d>] lock_acquire+0x9d/0x140 [<c188459c>] mutex_lock_nested+0x6c/0x420 [<d0aab48e>] l2cap_chan_add+0x1e/0x40 [bluetooth] [<d0aac618>] l2cap_chan_connect+0x348/0x8f0 [bluetooth] [<d0cc9a91>] lowpan_control_write+0x221/0x2d0 [bluetooth_6lowpan] -> #0 (&chan->lock){+.+.+.}: [<c10928d8>] __lock_acquire+0x1a18/0x1d20 [<c109324d>] lock_acquire+0x9d/0x140 [<c188459c>] mutex_lock_nested+0x6c/0x420 [<d0ab05fd>] l2cap_connect_cfm+0x1dd/0x3f0 [bluetooth] [<d0a909c4>] hci_le_meta_evt+0x11a4/0x1260 [bluetooth] [<d0a910eb>] hci_event_packet+0x3ab/0x3120 [bluetooth] [<d0a7cb08>] hci_rx_work+0x208/0x4a0 [bluetooth] CPU0 CPU1 ---- ---- lock(&conn->chan_lock); lock(&chan->lock); lock(&conn->chan_lock); lock(&chan->lock); Before calling l2cap_chan_add() the channel is not part of the conn->chan_l list, and can therefore only be accessed by the L2CAP user (such as l2cap_sock.c). We can therefore assume that it is the responsibility of the user to handle mutual exclusion until this point (which we can see is already true in l2cap_sock.c by it in many places touching chan members without holding chan->lock). Since the hci_conn and by exctension l2cap_conn creation in the l2cap_chan_connect() function depend on chan details we cannot simply add a mutex_lock(&conn->chan_lock) in the beginning of the function (since the conn object doesn't yet exist there). What we can do however is move the chan->lock taking later into the function where we already have the conn object and can that way take conn->chan_lock first. This patch implements the above strategy and does some other necessary changes such as using __l2cap_chan_add() which assumes conn->chan_lock is held, as well as adding a second needed label so the unlocking happens as it should. Reported-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-02 07:16:22 +00:00
chan_unlock:
l2cap_chan_unlock(chan);
Bluetooth: Fix lockdep warning with l2cap_chan_connect The L2CAP connection's channel list lock (conn->chan_lock) must never be taken while already holding a channel lock (chan->lock) in order to avoid lock-inversion and lockdep warnings. So far the l2cap_chan_connect function has acquired the chan->lock early in the function and then later called l2cap_chan_add(conn, chan) which will try to take the conn->chan_lock. This violates the correct order of taking the locks and may lead to the following type of lockdep warnings: -> #1 (&conn->chan_lock){+.+...}: [<c109324d>] lock_acquire+0x9d/0x140 [<c188459c>] mutex_lock_nested+0x6c/0x420 [<d0aab48e>] l2cap_chan_add+0x1e/0x40 [bluetooth] [<d0aac618>] l2cap_chan_connect+0x348/0x8f0 [bluetooth] [<d0cc9a91>] lowpan_control_write+0x221/0x2d0 [bluetooth_6lowpan] -> #0 (&chan->lock){+.+.+.}: [<c10928d8>] __lock_acquire+0x1a18/0x1d20 [<c109324d>] lock_acquire+0x9d/0x140 [<c188459c>] mutex_lock_nested+0x6c/0x420 [<d0ab05fd>] l2cap_connect_cfm+0x1dd/0x3f0 [bluetooth] [<d0a909c4>] hci_le_meta_evt+0x11a4/0x1260 [bluetooth] [<d0a910eb>] hci_event_packet+0x3ab/0x3120 [bluetooth] [<d0a7cb08>] hci_rx_work+0x208/0x4a0 [bluetooth] CPU0 CPU1 ---- ---- lock(&conn->chan_lock); lock(&chan->lock); lock(&conn->chan_lock); lock(&chan->lock); Before calling l2cap_chan_add() the channel is not part of the conn->chan_l list, and can therefore only be accessed by the L2CAP user (such as l2cap_sock.c). We can therefore assume that it is the responsibility of the user to handle mutual exclusion until this point (which we can see is already true in l2cap_sock.c by it in many places touching chan members without holding chan->lock). Since the hci_conn and by exctension l2cap_conn creation in the l2cap_chan_connect() function depend on chan details we cannot simply add a mutex_lock(&conn->chan_lock) in the beginning of the function (since the conn object doesn't yet exist there). What we can do however is move the chan->lock taking later into the function where we already have the conn object and can that way take conn->chan_lock first. This patch implements the above strategy and does some other necessary changes such as using __l2cap_chan_add() which assumes conn->chan_lock is held, as well as adding a second needed label so the unlocking happens as it should. Reported-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-02 07:16:22 +00:00
mutex_unlock(&conn->chan_lock);
done:
hci_dev_unlock(hdev);
hci_dev_put(hdev);
return err;
}
EXPORT_SYMBOL_GPL(l2cap_chan_connect);
/* ---- L2CAP interface with lower layer (HCI) ---- */
int l2cap_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr)
{
int exact = 0, lm1 = 0, lm2 = 0;
struct l2cap_chan *c;
BT_DBG("hdev %s, bdaddr %pMR", hdev->name, bdaddr);
/* Find listening sockets and check their link_mode */
read_lock(&chan_list_lock);
list_for_each_entry(c, &chan_list, global_l) {
if (c->state != BT_LISTEN)
continue;
if (!bacmp(&c->src, &hdev->bdaddr)) {
lm1 |= HCI_LM_ACCEPT;
if (test_bit(FLAG_ROLE_SWITCH, &c->flags))
lm1 |= HCI_LM_MASTER;
exact++;
} else if (!bacmp(&c->src, BDADDR_ANY)) {
lm2 |= HCI_LM_ACCEPT;
if (test_bit(FLAG_ROLE_SWITCH, &c->flags))
lm2 |= HCI_LM_MASTER;
}
}
read_unlock(&chan_list_lock);
return exact ? lm1 : lm2;
}
/* Find the next fixed channel in BT_LISTEN state, continue iteration
* from an existing channel in the list or from the beginning of the
* global list (by passing NULL as first parameter).
*/
static struct l2cap_chan *l2cap_global_fixed_chan(struct l2cap_chan *c,
struct hci_conn *hcon)
{
u8 src_type = bdaddr_src_type(hcon);
read_lock(&chan_list_lock);
if (c)
c = list_next_entry(c, global_l);
else
c = list_entry(chan_list.next, typeof(*c), global_l);
list_for_each_entry_from(c, &chan_list, global_l) {
if (c->chan_type != L2CAP_CHAN_FIXED)
continue;
if (c->state != BT_LISTEN)
continue;
if (bacmp(&c->src, &hcon->src) && bacmp(&c->src, BDADDR_ANY))
continue;
if (src_type != c->src_type)
continue;
l2cap_chan_hold(c);
read_unlock(&chan_list_lock);
return c;
}
read_unlock(&chan_list_lock);
return NULL;
}
static void l2cap_connect_cfm(struct hci_conn *hcon, u8 status)
{
struct hci_dev *hdev = hcon->hdev;
struct l2cap_conn *conn;
struct l2cap_chan *pchan;
u8 dst_type;
if (hcon->type != ACL_LINK && hcon->type != LE_LINK)
return;
BT_DBG("hcon %p bdaddr %pMR status %d", hcon, &hcon->dst, status);
if (status) {
l2cap_conn_del(hcon, bt_to_errno(status));
return;
}
conn = l2cap_conn_add(hcon);
if (!conn)
return;
dst_type = bdaddr_dst_type(hcon);
/* If device is blocked, do not create channels for it */
if (hci_bdaddr_list_lookup(&hdev->blacklist, &hcon->dst, dst_type))
return;
/* Find fixed channels and notify them of the new connection. We
* use multiple individual lookups, continuing each time where
* we left off, because the list lock would prevent calling the
* potentially sleeping l2cap_chan_lock() function.
*/
pchan = l2cap_global_fixed_chan(NULL, hcon);
while (pchan) {
struct l2cap_chan *chan, *next;
/* Client fixed channels should override server ones */
if (__l2cap_get_chan_by_dcid(conn, pchan->scid))
goto next;
l2cap_chan_lock(pchan);
chan = pchan->ops->new_connection(pchan);
if (chan) {
bacpy(&chan->src, &hcon->src);
bacpy(&chan->dst, &hcon->dst);
chan->src_type = bdaddr_src_type(hcon);
chan->dst_type = dst_type;
__l2cap_chan_add(conn, chan);
}
l2cap_chan_unlock(pchan);
next:
next = l2cap_global_fixed_chan(pchan, hcon);
l2cap_chan_put(pchan);
pchan = next;
}
l2cap_conn_ready(conn);
}
int l2cap_disconn_ind(struct hci_conn *hcon)
Bluetooth: Ask upper layers for HCI disconnect reason Some of the qualification tests demand that in case of failures in L2CAP the HCI disconnect should indicate a reason why L2CAP fails. This is a bluntly layer violation since multiple L2CAP connections could be using the same ACL and thus forcing a disconnect reason is not a good idea. To comply with the Bluetooth test specification, the disconnect reason is now stored in the L2CAP connection structure and every time a new L2CAP channel is added it will set back to its default. So only in the case where the L2CAP channel with the disconnect reason is really the last one, it will propagated to the HCI layer. The HCI layer has been extended with a disconnect indication that allows it to ask upper layers for a disconnect reason. The upper layer must not support this callback and in that case it will nicely default to the existing behavior. If an upper layer like L2CAP can provide a disconnect reason that one will be used to disconnect the ACL or SCO link. No modification to the ACL disconnect timeout have been made. So in case of Linux to Linux connection the initiator will disconnect the ACL link before the acceptor side can signal the specific disconnect reason. That is perfectly fine since Linux doesn't make use of this value anyway. The L2CAP layer has a perfect valid error code for rejecting connection due to a security violation. It is unclear why the Bluetooth specification insists on having specific HCI disconnect reason. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-12 13:02:50 +00:00
{
struct l2cap_conn *conn = hcon->l2cap_data;
BT_DBG("hcon %p", hcon);
if (!conn)
return HCI_ERROR_REMOTE_USER_TERM;
Bluetooth: Ask upper layers for HCI disconnect reason Some of the qualification tests demand that in case of failures in L2CAP the HCI disconnect should indicate a reason why L2CAP fails. This is a bluntly layer violation since multiple L2CAP connections could be using the same ACL and thus forcing a disconnect reason is not a good idea. To comply with the Bluetooth test specification, the disconnect reason is now stored in the L2CAP connection structure and every time a new L2CAP channel is added it will set back to its default. So only in the case where the L2CAP channel with the disconnect reason is really the last one, it will propagated to the HCI layer. The HCI layer has been extended with a disconnect indication that allows it to ask upper layers for a disconnect reason. The upper layer must not support this callback and in that case it will nicely default to the existing behavior. If an upper layer like L2CAP can provide a disconnect reason that one will be used to disconnect the ACL or SCO link. No modification to the ACL disconnect timeout have been made. So in case of Linux to Linux connection the initiator will disconnect the ACL link before the acceptor side can signal the specific disconnect reason. That is perfectly fine since Linux doesn't make use of this value anyway. The L2CAP layer has a perfect valid error code for rejecting connection due to a security violation. It is unclear why the Bluetooth specification insists on having specific HCI disconnect reason. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-12 13:02:50 +00:00
return conn->disc_reason;
}
static void l2cap_disconn_cfm(struct hci_conn *hcon, u8 reason)
{
if (hcon->type != ACL_LINK && hcon->type != LE_LINK)
return;
BT_DBG("hcon %p reason %d", hcon, reason);
l2cap_conn_del(hcon, bt_to_errno(reason));
}
static inline void l2cap_check_encryption(struct l2cap_chan *chan, u8 encrypt)
{
if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED)
return;
if (encrypt == 0x00) {
if (chan->sec_level == BT_SECURITY_MEDIUM) {
__set_chan_timer(chan, L2CAP_ENC_TIMEOUT);
} else if (chan->sec_level == BT_SECURITY_HIGH ||
chan->sec_level == BT_SECURITY_FIPS)
l2cap_chan_close(chan, ECONNREFUSED);
} else {
if (chan->sec_level == BT_SECURITY_MEDIUM)
__clear_chan_timer(chan);
}
}
static void l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
{
struct l2cap_conn *conn = hcon->l2cap_data;
struct l2cap_chan *chan;
if (!conn)
return;
BT_DBG("conn %p status 0x%2.2x encrypt %u", conn, status, encrypt);
mutex_lock(&conn->chan_lock);
list_for_each_entry(chan, &conn->chan_l, list) {
l2cap_chan_lock(chan);
BT_DBG("chan %p scid 0x%4.4x state %s", chan, chan->scid,
state_to_string(chan->state));
if (chan->scid == L2CAP_CID_A2MP) {
l2cap_chan_unlock(chan);
continue;
}
if (!status && encrypt)
chan->sec_level = hcon->sec_level;
if (!__l2cap_no_conn_pending(chan)) {
l2cap_chan_unlock(chan);
continue;
}
if (!status && (chan->state == BT_CONNECTED ||
chan->state == BT_CONFIG)) {
chan->ops->resume(chan);
l2cap_check_encryption(chan, encrypt);
l2cap_chan_unlock(chan);
continue;
}
if (chan->state == BT_CONNECT) {
if (!status)
l2cap_start_connection(chan);
else
__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
} else if (chan->state == BT_CONNECT2 &&
chan->mode != L2CAP_MODE_LE_FLOWCTL) {
struct l2cap_conn_rsp rsp;
__u16 res, stat;
if (!status) {
if (test_bit(FLAG_DEFER_SETUP, &chan->flags)) {
res = L2CAP_CR_PEND;
stat = L2CAP_CS_AUTHOR_PEND;
chan->ops->defer(chan);
} else {
l2cap_state_change(chan, BT_CONFIG);
res = L2CAP_CR_SUCCESS;
stat = L2CAP_CS_NO_INFO;
}
} else {
l2cap_state_change(chan, BT_DISCONN);
__set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
res = L2CAP_CR_SEC_BLOCK;
stat = L2CAP_CS_NO_INFO;
}
rsp.scid = cpu_to_le16(chan->dcid);
rsp.dcid = cpu_to_le16(chan->scid);
rsp.result = cpu_to_le16(res);
rsp.status = cpu_to_le16(stat);
l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_RSP,
sizeof(rsp), &rsp);
Bluetooth: Send a configuration request after security confirmation Sometimes an ACL link must be raised to a higher security level after an L2CAP connection is requested, but before a connection response is sent. In this case, a connection response sent by L2CAP was not immediately followed by a configuration request. Other code paths do send this configuration request right away. It was possible for the connection to stall while L2CAP waited for the remote device (like PTS) to trigger the configuration process. Here is an abbreviated hcidump of the failure case with PTS: 1337806446.051982 > ACL data: handle 43 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 1337806446.052050 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x000000b8 1337806446.595320 > ACL data: handle 43 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 4097 scid 0x0041 1337806446.595673 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 0 1337806446.595679 < ACL data: handle 43 flags 0x00 dlen 10 L2CAP(s): Info req: type 2 1337806446.669835 > ACL data: handle 43 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00000028 1337806446.669899 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 1337806446.669906 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 1 <security setup here> 1337806446.769888 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0 At this point, the connection stalls and no further messages are sent on the L2CAP signaling channel. No data is received either. If we immediately send a configuration request after a successful connect response, the connection completes: 1337724090.041162 > ACL data: handle 43 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 1337724090.041236 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x000000b8 1337724090.597128 > ACL data: handle 43 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 4097 scid 0x0041 1337724090.597236 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 0 1337724090.597244 < ACL data: handle 43 flags 0x00 dlen 10 L2CAP(s): Info req: type 2 1337724090.660842 > ACL data: handle 43 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00000028 1337724090.660926 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 1337724090.660934 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 1 <security setup here> 1337724090.755162 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0 1337724090.755171 < ACL data: handle 43 flags 0x00 dlen 23 L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 11 1337724091.361847 > ACL data: handle 43 flags 0x02 dlen 29 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 15 1337724091.863808 > ACL data: handle 43 flags 0x02 dlen 23 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 11 1337724091.863882 < ACL data: handle 43 flags 0x00 dlen 29 L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 15 1337724092.683745 > ACL data: handle 43 flags 0x02 dlen 12 L2CAP(d): cid 0x0040 len 8 [psm 4097] 0000: 00 00 11 22 33 44 34 2f ..."3D4/ Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-05-23 21:59:30 +00:00
if (!test_bit(CONF_REQ_SENT, &chan->conf_state) &&
res == L2CAP_CR_SUCCESS) {
char buf[128];
set_bit(CONF_REQ_SENT, &chan->conf_state);
l2cap_send_cmd(conn, l2cap_get_ident(conn),
L2CAP_CONF_REQ,
l2cap_build_conf_req(chan, buf),
buf);
chan->num_conf_req++;
}
}
l2cap_chan_unlock(chan);
}
mutex_unlock(&conn->chan_lock);
}
void l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
{
struct l2cap_conn *conn = hcon->l2cap_data;
struct l2cap_hdr *hdr;
int len;
/* For AMP controller do not create l2cap conn */
if (!conn && hcon->hdev->dev_type != HCI_PRIMARY)
goto drop;
if (!conn)
conn = l2cap_conn_add(hcon);
if (!conn)
goto drop;
BT_DBG("conn %p len %d flags 0x%x", conn, skb->len, flags);
switch (flags) {
case ACL_START:
case ACL_START_NO_FLUSH:
case ACL_COMPLETE:
if (conn->rx_len) {
BT_ERR("Unexpected start frame (len %d)", skb->len);
kfree_skb(conn->rx_skb);
conn->rx_skb = NULL;
conn->rx_len = 0;
l2cap_conn_unreliable(conn, ECOMM);
}
/* Start fragment always begin with Basic L2CAP header */
if (skb->len < L2CAP_HDR_SIZE) {
BT_ERR("Frame is too short (len %d)", skb->len);
l2cap_conn_unreliable(conn, ECOMM);
goto drop;
}
hdr = (struct l2cap_hdr *) skb->data;
len = __le16_to_cpu(hdr->len) + L2CAP_HDR_SIZE;
if (len == skb->len) {
/* Complete frame received */
l2cap_recv_frame(conn, skb);
return;
}
BT_DBG("Start: total len %d, frag len %d", len, skb->len);
if (skb->len > len) {
BT_ERR("Frame is too long (len %d, expected len %d)",
skb->len, len);
l2cap_conn_unreliable(conn, ECOMM);
goto drop;
}
/* Allocate skb for the complete frame (with header) */
conn->rx_skb = bt_skb_alloc(len, GFP_KERNEL);
if (!conn->rx_skb)
goto drop;
skb_copy_from_linear_data(skb, skb_put(conn->rx_skb, skb->len),
skb->len);
conn->rx_len = len - skb->len;
break;
case ACL_CONT:
BT_DBG("Cont: frag len %d (expecting %d)", skb->len, conn->rx_len);
if (!conn->rx_len) {
BT_ERR("Unexpected continuation frame (len %d)", skb->len);
l2cap_conn_unreliable(conn, ECOMM);
goto drop;
}
if (skb->len > conn->rx_len) {
BT_ERR("Fragment is too long (len %d, expected %d)",
skb->len, conn->rx_len);
kfree_skb(conn->rx_skb);
conn->rx_skb = NULL;
conn->rx_len = 0;
l2cap_conn_unreliable(conn, ECOMM);
goto drop;
}
skb_copy_from_linear_data(skb, skb_put(conn->rx_skb, skb->len),
skb->len);
conn->rx_len -= skb->len;
if (!conn->rx_len) {
/* Complete frame received. l2cap_recv_frame
* takes ownership of the skb so set the global
* rx_skb pointer to NULL first.
*/
struct sk_buff *rx_skb = conn->rx_skb;
conn->rx_skb = NULL;
l2cap_recv_frame(conn, rx_skb);
}
break;
}
drop:
kfree_skb(skb);
}
static struct hci_cb l2cap_cb = {
.name = "L2CAP",
.connect_cfm = l2cap_connect_cfm,
.disconn_cfm = l2cap_disconn_cfm,
.security_cfm = l2cap_security_cfm,
};
static int l2cap_debugfs_show(struct seq_file *f, void *p)
{
struct l2cap_chan *c;
read_lock(&chan_list_lock);
list_for_each_entry(c, &chan_list, global_l) {
seq_printf(f, "%pMR (%u) %pMR (%u) %d %d 0x%4.4x 0x%4.4x %d %d %d %d\n",
&c->src, c->src_type, &c->dst, c->dst_type,
c->state, __le16_to_cpu(c->psm),
c->scid, c->dcid, c->imtu, c->omtu,
c->sec_level, c->mode);
}
read_unlock(&chan_list_lock);
return 0;
}
static int l2cap_debugfs_open(struct inode *inode, struct file *file)
{
return single_open(file, l2cap_debugfs_show, inode->i_private);
}
static const struct file_operations l2cap_debugfs_fops = {
.open = l2cap_debugfs_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static struct dentry *l2cap_debugfs;
int __init l2cap_init(void)
{
int err;
err = l2cap_init_sockets();
if (err < 0)
return err;
hci_register_cb(&l2cap_cb);
if (IS_ERR_OR_NULL(bt_debugfs))
return 0;
l2cap_debugfs = debugfs_create_file("l2cap", 0444, bt_debugfs,
NULL, &l2cap_debugfs_fops);
debugfs_create_u16("l2cap_le_max_credits", 0644, bt_debugfs,
&le_max_credits);
debugfs_create_u16("l2cap_le_default_mps", 0644, bt_debugfs,
&le_default_mps);
return 0;
}
void l2cap_exit(void)
{
debugfs_remove(l2cap_debugfs);
hci_unregister_cb(&l2cap_cb);
l2cap_cleanup_sockets();
}
module_param(disable_ertm, bool, 0644);
MODULE_PARM_DESC(disable_ertm, "Disable enhanced retransmission mode");