linux/drivers/block/drbd/drbd_protocol.h

427 lines
13 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __DRBD_PROTOCOL_H
#define __DRBD_PROTOCOL_H
enum drbd_packet {
/* receiver (data socket) */
P_DATA = 0x00,
P_DATA_REPLY = 0x01, /* Response to P_DATA_REQUEST */
P_RS_DATA_REPLY = 0x02, /* Response to P_RS_DATA_REQUEST */
P_BARRIER = 0x03,
P_BITMAP = 0x04,
P_BECOME_SYNC_TARGET = 0x05,
P_BECOME_SYNC_SOURCE = 0x06,
P_UNPLUG_REMOTE = 0x07, /* Used at various times to hint the peer */
P_DATA_REQUEST = 0x08, /* Used to ask for a data block */
P_RS_DATA_REQUEST = 0x09, /* Used to ask for a data block for resync */
P_SYNC_PARAM = 0x0a,
P_PROTOCOL = 0x0b,
P_UUIDS = 0x0c,
P_SIZES = 0x0d,
P_STATE = 0x0e,
P_SYNC_UUID = 0x0f,
P_AUTH_CHALLENGE = 0x10,
P_AUTH_RESPONSE = 0x11,
P_STATE_CHG_REQ = 0x12,
/* (meta socket) */
P_PING = 0x13,
P_PING_ACK = 0x14,
P_RECV_ACK = 0x15, /* Used in protocol B */
P_WRITE_ACK = 0x16, /* Used in protocol C */
P_RS_WRITE_ACK = 0x17, /* Is a P_WRITE_ACK, additionally call set_in_sync(). */
P_SUPERSEDED = 0x18, /* Used in proto C, two-primaries conflict detection */
P_NEG_ACK = 0x19, /* Sent if local disk is unusable */
P_NEG_DREPLY = 0x1a, /* Local disk is broken... */
P_NEG_RS_DREPLY = 0x1b, /* Local disk is broken... */
P_BARRIER_ACK = 0x1c,
P_STATE_CHG_REPLY = 0x1d,
/* "new" commands, no longer fitting into the ordering scheme above */
P_OV_REQUEST = 0x1e, /* data socket */
P_OV_REPLY = 0x1f,
P_OV_RESULT = 0x20, /* meta socket */
P_CSUM_RS_REQUEST = 0x21, /* data socket */
P_RS_IS_IN_SYNC = 0x22, /* meta socket */
P_SYNC_PARAM89 = 0x23, /* data socket, protocol version 89 replacement for P_SYNC_PARAM */
P_COMPRESSED_BITMAP = 0x24, /* compressed or otherwise encoded bitmap transfer */
/* P_CKPT_FENCE_REQ = 0x25, * currently reserved for protocol D */
/* P_CKPT_DISABLE_REQ = 0x26, * currently reserved for protocol D */
P_DELAY_PROBE = 0x27, /* is used on BOTH sockets */
P_OUT_OF_SYNC = 0x28, /* Mark as out of sync (Outrunning), data socket */
P_RS_CANCEL = 0x29, /* meta: Used to cancel RS_DATA_REQUEST packet by SyncSource */
P_CONN_ST_CHG_REQ = 0x2a, /* data sock: Connection wide state request */
P_CONN_ST_CHG_REPLY = 0x2b, /* meta sock: Connection side state req reply */
P_RETRY_WRITE = 0x2c, /* Protocol C: retry conflicting write request */
P_PROTOCOL_UPDATE = 0x2d, /* data sock: is used in established connections */
/* 0x2e to 0x30 reserved, used in drbd 9 */
/* REQ_OP_DISCARD. We used "discard" in different contexts before,
* which is why I chose TRIM here, to disambiguate. */
P_TRIM = 0x31,
/* Only use these two if both support FF_THIN_RESYNC */
P_RS_THIN_REQ = 0x32, /* Request a block for resync or reply P_RS_DEALLOCATED */
P_RS_DEALLOCATED = 0x33, /* Contains only zeros on sync source node */
/* REQ_WRITE_SAME.
* On a receiving side without REQ_WRITE_SAME,
* we may fall back to an opencoded loop instead. */
P_WSAME = 0x34,
drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire") And also re-enable partial-zero-out + discard aligned. With the introduction of REQ_OP_WRITE_ZEROES, we started to use that for both WRITE_ZEROES and DISCARDS, hoping that WRITE_ZEROES would "do what we want", UNMAP if possible, zero-out the rest. The example scenario is some LVM "thin" backend. While an un-allocated block on dm-thin reads as zeroes, on a dm-thin with "skip_block_zeroing=true", after a partial block write allocated that block, that same block may well map "undefined old garbage" from the backends on LBAs that have not yet been written to. If we cannot distinguish between zero-out and discard on the receiving side, to avoid "undefined old garbage" to pop up randomly at later times on supposedly zero-initialized blocks, we'd need to map all discards to zero-out on the receiving side. But that would potentially do a full alloc on thinly provisioned backends, even when the expectation was to unmap/trim/discard/de-allocate. We need to distinguish on the protocol level, whether we need to guarantee zeroes (and thus use zero-out, potentially doing the mentioned full-alloc), or if we want to put the emphasis on discard, and only do a "best effort zeroing" (by "discarding" blocks aligned to discard-granularity, and zeroing only potential unaligned head and tail clippings to at least *try* to avoid "false positives" in an online-verify later), hoping that someone set skip_block_zeroing=false. For some discussion regarding this on dm-devel, see also https://www.mail-archive.com/dm-devel%40redhat.com/msg07965.html https://www.redhat.com/archives/dm-devel/2018-January/msg00271.html For backward compatibility, P_TRIM means zero-out, unless the DRBD_FF_WZEROES feature flag is agreed upon during handshake. To have upper layers even try to submit WRITE ZEROES requests, we need to announce "efficient zeroout" independently. We need to fixup max_write_zeroes_sectors after blk_queue_stack_limits(): if we can handle "zeroes" efficiently on the protocol, we want to do that, even if our backend does not announce max_write_zeroes_sectors itself. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20 16:23:42 +00:00
/* 0x35 already claimed in DRBD 9 */
P_ZEROES = 0x36, /* data sock: zero-out, WRITE_ZEROES */
/* 0x40 .. 0x48 already claimed in DRBD 9 */
P_MAY_IGNORE = 0x100, /* Flag to test if (cmd > P_MAY_IGNORE) ... */
P_MAX_OPT_CMD = 0x101,
/* special command ids for handshake */
P_INITIAL_META = 0xfff1, /* First Packet on the MetaSock */
P_INITIAL_DATA = 0xfff2, /* First Packet on the Socket */
P_CONNECTION_FEATURES = 0xfffe /* FIXED for the next century! */
};
#ifndef __packed
#define __packed __attribute__((packed))
#endif
/* This is the layout for a packet on the wire.
* The byteorder is the network byte order.
* (except block_id and barrier fields.
* these are pointers to local structs
* and have no relevance for the partner,
* which just echoes them as received.)
*
* NOTE that the payload starts at a long aligned offset,
* regardless of 32 or 64 bit arch!
*/
struct p_header80 {
u32 magic;
u16 command;
u16 length; /* bytes of data after this header */
} __packed;
/* Header for big packets, Used for data packets exceeding 64kB */
struct p_header95 {
u16 magic; /* use DRBD_MAGIC_BIG here */
u16 command;
u32 length;
} __packed;
struct p_header100 {
u32 magic;
u16 volume;
u16 command;
u32 length;
u32 pad;
} __packed;
/* These defines must not be changed without changing the protocol version.
* New defines may only be introduced together with protocol version bump or
* new protocol feature flags.
*/
#define DP_HARDBARRIER 1 /* no longer used */
#define DP_RW_SYNC 2 /* equals REQ_SYNC */
#define DP_MAY_SET_IN_SYNC 4
#define DP_UNPLUG 8 /* not used anymore */
#define DP_FUA 16 /* equals REQ_FUA */
#define DP_FLUSH 32 /* equals REQ_PREFLUSH */
#define DP_DISCARD 64 /* equals REQ_OP_DISCARD */
#define DP_SEND_RECEIVE_ACK 128 /* This is a proto B write request */
#define DP_SEND_WRITE_ACK 256 /* This is a proto C write request */
#define DP_WSAME 512 /* equiv. REQ_WRITE_SAME */
drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire") And also re-enable partial-zero-out + discard aligned. With the introduction of REQ_OP_WRITE_ZEROES, we started to use that for both WRITE_ZEROES and DISCARDS, hoping that WRITE_ZEROES would "do what we want", UNMAP if possible, zero-out the rest. The example scenario is some LVM "thin" backend. While an un-allocated block on dm-thin reads as zeroes, on a dm-thin with "skip_block_zeroing=true", after a partial block write allocated that block, that same block may well map "undefined old garbage" from the backends on LBAs that have not yet been written to. If we cannot distinguish between zero-out and discard on the receiving side, to avoid "undefined old garbage" to pop up randomly at later times on supposedly zero-initialized blocks, we'd need to map all discards to zero-out on the receiving side. But that would potentially do a full alloc on thinly provisioned backends, even when the expectation was to unmap/trim/discard/de-allocate. We need to distinguish on the protocol level, whether we need to guarantee zeroes (and thus use zero-out, potentially doing the mentioned full-alloc), or if we want to put the emphasis on discard, and only do a "best effort zeroing" (by "discarding" blocks aligned to discard-granularity, and zeroing only potential unaligned head and tail clippings to at least *try* to avoid "false positives" in an online-verify later), hoping that someone set skip_block_zeroing=false. For some discussion regarding this on dm-devel, see also https://www.mail-archive.com/dm-devel%40redhat.com/msg07965.html https://www.redhat.com/archives/dm-devel/2018-January/msg00271.html For backward compatibility, P_TRIM means zero-out, unless the DRBD_FF_WZEROES feature flag is agreed upon during handshake. To have upper layers even try to submit WRITE ZEROES requests, we need to announce "efficient zeroout" independently. We need to fixup max_write_zeroes_sectors after blk_queue_stack_limits(): if we can handle "zeroes" efficiently on the protocol, we want to do that, even if our backend does not announce max_write_zeroes_sectors itself. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20 16:23:42 +00:00
#define DP_ZEROES 1024 /* equiv. REQ_OP_WRITE_ZEROES */
/* possible combinations:
* REQ_OP_WRITE_ZEROES: DP_DISCARD | DP_ZEROES
* REQ_OP_WRITE_ZEROES + REQ_NOUNMAP: DP_ZEROES
*/
struct p_data {
u64 sector; /* 64 bits sector number */
u64 block_id; /* to identify the request in protocol B&C */
u32 seq_num;
u32 dp_flags;
} __packed;
struct p_trim {
struct p_data p_data;
u32 size; /* == bio->bi_size */
} __packed;
struct p_wsame {
struct p_data p_data;
u32 size; /* == bio->bi_size */
} __packed;
/*
* commands which share a struct:
* p_block_ack:
* P_RECV_ACK (proto B), P_WRITE_ACK (proto C),
* P_SUPERSEDED (proto C, two-primaries conflict detection)
* p_block_req:
* P_DATA_REQUEST, P_RS_DATA_REQUEST
*/
struct p_block_ack {
u64 sector;
u64 block_id;
u32 blksize;
u32 seq_num;
} __packed;
struct p_block_req {
u64 sector;
u64 block_id;
u32 blksize;
u32 pad; /* to multiple of 8 Byte */
} __packed;
/*
* commands with their own struct for additional fields:
* P_CONNECTION_FEATURES
* P_BARRIER
* P_BARRIER_ACK
* P_SYNC_PARAM
* ReportParams
*/
/* supports TRIM/DISCARD on the "wire" protocol */
#define DRBD_FF_TRIM 1
/* Detect all-zeros during resync, and rather TRIM/UNMAP/DISCARD those blocks
* instead of fully allocate a supposedly thin volume on initial resync */
#define DRBD_FF_THIN_RESYNC 2
/* supports REQ_WRITE_SAME on the "wire" protocol.
* Note: this flag is overloaded,
* its presence also
* - indicates support for 128 MiB "batch bios",
* max discard size of 128 MiB
* instead of 4M before that.
* - indicates that we exchange additional settings in p_sizes
* drbd_send_sizes()/receive_sizes()
*/
#define DRBD_FF_WSAME 4
drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire") And also re-enable partial-zero-out + discard aligned. With the introduction of REQ_OP_WRITE_ZEROES, we started to use that for both WRITE_ZEROES and DISCARDS, hoping that WRITE_ZEROES would "do what we want", UNMAP if possible, zero-out the rest. The example scenario is some LVM "thin" backend. While an un-allocated block on dm-thin reads as zeroes, on a dm-thin with "skip_block_zeroing=true", after a partial block write allocated that block, that same block may well map "undefined old garbage" from the backends on LBAs that have not yet been written to. If we cannot distinguish between zero-out and discard on the receiving side, to avoid "undefined old garbage" to pop up randomly at later times on supposedly zero-initialized blocks, we'd need to map all discards to zero-out on the receiving side. But that would potentially do a full alloc on thinly provisioned backends, even when the expectation was to unmap/trim/discard/de-allocate. We need to distinguish on the protocol level, whether we need to guarantee zeroes (and thus use zero-out, potentially doing the mentioned full-alloc), or if we want to put the emphasis on discard, and only do a "best effort zeroing" (by "discarding" blocks aligned to discard-granularity, and zeroing only potential unaligned head and tail clippings to at least *try* to avoid "false positives" in an online-verify later), hoping that someone set skip_block_zeroing=false. For some discussion regarding this on dm-devel, see also https://www.mail-archive.com/dm-devel%40redhat.com/msg07965.html https://www.redhat.com/archives/dm-devel/2018-January/msg00271.html For backward compatibility, P_TRIM means zero-out, unless the DRBD_FF_WZEROES feature flag is agreed upon during handshake. To have upper layers even try to submit WRITE ZEROES requests, we need to announce "efficient zeroout" independently. We need to fixup max_write_zeroes_sectors after blk_queue_stack_limits(): if we can handle "zeroes" efficiently on the protocol, we want to do that, even if our backend does not announce max_write_zeroes_sectors itself. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-20 16:23:42 +00:00
/* supports REQ_OP_WRITE_ZEROES on the "wire" protocol.
*
* We used to map that to "discard" on the sending side, and if we cannot
* guarantee that discard zeroes data, the receiving side would map discard
* back to zero-out.
*
* With the introduction of REQ_OP_WRITE_ZEROES,
* we started to use that for both WRITE_ZEROES and DISCARDS,
* hoping that WRITE_ZEROES would "do what we want",
* UNMAP if possible, zero-out the rest.
*
* The example scenario is some LVM "thin" backend.
*
* While an un-allocated block on dm-thin reads as zeroes, on a dm-thin
* with "skip_block_zeroing=true", after a partial block write allocated
* that block, that same block may well map "undefined old garbage" from
* the backends on LBAs that have not yet been written to.
*
* If we cannot distinguish between zero-out and discard on the receiving
* side, to avoid "undefined old garbage" to pop up randomly at later times
* on supposedly zero-initialized blocks, we'd need to map all discards to
* zero-out on the receiving side. But that would potentially do a full
* alloc on thinly provisioned backends, even when the expectation was to
* unmap/trim/discard/de-allocate.
*
* We need to distinguish on the protocol level, whether we need to guarantee
* zeroes (and thus use zero-out, potentially doing the mentioned full-alloc),
* or if we want to put the emphasis on discard, and only do a "best effort
* zeroing" (by "discarding" blocks aligned to discard-granularity, and zeroing
* only potential unaligned head and tail clippings), to at least *try* to
* avoid "false positives" in an online-verify later, hoping that someone
* set skip_block_zeroing=false.
*/
#define DRBD_FF_WZEROES 8
struct p_connection_features {
u32 protocol_min;
u32 feature_flags;
u32 protocol_max;
/* should be more than enough for future enhancements
* for now, feature_flags and the reserved array shall be zero.
*/
u32 _pad;
u64 reserved[7];
} __packed;
struct p_barrier {
u32 barrier; /* barrier number _handle_ only */
u32 pad; /* to multiple of 8 Byte */
} __packed;
struct p_barrier_ack {
u32 barrier;
u32 set_size;
} __packed;
struct p_rs_param {
u32 resync_rate;
/* Since protocol version 88 and higher. */
char verify_alg[0];
} __packed;
struct p_rs_param_89 {
u32 resync_rate;
/* protocol version 89: */
char verify_alg[SHARED_SECRET_MAX];
char csums_alg[SHARED_SECRET_MAX];
} __packed;
struct p_rs_param_95 {
u32 resync_rate;
char verify_alg[SHARED_SECRET_MAX];
char csums_alg[SHARED_SECRET_MAX];
u32 c_plan_ahead;
u32 c_delay_target;
u32 c_fill_target;
u32 c_max_rate;
} __packed;
enum drbd_conn_flags {
CF_DISCARD_MY_DATA = 1,
CF_DRY_RUN = 2,
};
struct p_protocol {
u32 protocol;
u32 after_sb_0p;
u32 after_sb_1p;
u32 after_sb_2p;
u32 conn_flags;
u32 two_primaries;
/* Since protocol version 87 and higher. */
char integrity_alg[0];
} __packed;
struct p_uuids {
u64 uuid[UI_EXTENDED_SIZE];
} __packed;
struct p_rs_uuid {
u64 uuid;
} __packed;
/* optional queue_limits if (agreed_features & DRBD_FF_WSAME)
* see also struct queue_limits, as of late 2015 */
struct o_qlim {
/* we don't need it yet, but we may as well communicate it now */
u32 physical_block_size;
/* so the original in struct queue_limits is unsigned short,
* but I'd have to put in padding anyways. */
u32 logical_block_size;
/* One incoming bio becomes one DRBD request,
* which may be translated to several bio on the receiving side.
* We don't need to communicate chunk/boundary/segment ... limits.
*/
/* various IO hints may be useful with "diskless client" setups */
u32 alignment_offset;
u32 io_min;
u32 io_opt;
/* We may need to communicate integrity stuff at some point,
* but let's not get ahead of ourselves. */
/* Backend discard capabilities.
* Receiving side uses "blkdev_issue_discard()", no need to communicate
* more specifics. If the backend cannot do discards, the DRBD peer
* may fall back to blkdev_issue_zeroout().
*/
u8 discard_enabled;
u8 discard_zeroes_data;
u8 write_same_capable;
u8 _pad;
} __packed;
struct p_sizes {
u64 d_size; /* size of disk */
u64 u_size; /* user requested size */
u64 c_size; /* current exported size */
u32 max_bio_size; /* Maximal size of a BIO */
u16 queue_order_type; /* not yet implemented in DRBD*/
u16 dds_flags; /* use enum dds_flags here. */
/* optional queue_limits if (agreed_features & DRBD_FF_WSAME) */
struct o_qlim qlim[0];
} __packed;
struct p_state {
u32 state;
} __packed;
struct p_req_state {
u32 mask;
u32 val;
} __packed;
struct p_req_state_reply {
u32 retcode;
} __packed;
struct p_drbd06_param {
u64 size;
u32 state;
u32 blksize;
u32 protocol;
u32 version;
u32 gen_cnt[5];
u32 bit_map_gen[5];
} __packed;
struct p_block_desc {
u64 sector;
u32 blksize;
u32 pad; /* to multiple of 8 Byte */
} __packed;
/* Valid values for the encoding field.
* Bump proto version when changing this. */
enum drbd_bitmap_code {
/* RLE_VLI_Bytes = 0,
* and other bit variants had been defined during
* algorithm evaluation. */
RLE_VLI_Bits = 2,
};
struct p_compressed_bm {
/* (encoding & 0x0f): actual encoding, see enum drbd_bitmap_code
* (encoding & 0x80): polarity (set/unset) of first runlength
* ((encoding >> 4) & 0x07): pad_bits, number of trailing zero bits
* used to pad up to head.length bytes
*/
u8 encoding;
u8 code[0];
} __packed;
struct p_delay_probe93 {
u32 seq_num; /* sequence number to match the two probe packets */
u32 offset; /* usecs the probe got sent after the reference time point */
} __packed;
/*
* Bitmap packets need to fit within a single page on the sender and receiver,
* so we are limited to 4 KiB (and not to PAGE_SIZE, which can be bigger).
*/
#define DRBD_SOCKET_BUFFER_SIZE 4096
#endif /* __DRBD_PROTOCOL_H */