leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
aeb64ff383
linux/drivers/media/dvb-frontends/rtl2832_priv.h

416 lines
11 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 13:51:31 +00:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
[media] RTL2832 DVB-T demodulator driver Changelog for ver. 0.5: - fixed code style and naming errors Changelog for ver. 0.4: - removed statistics as their calculation was wrong - fixed bug in Makefile - indentation and code style improvements Signed-off-by: Thomas Mair <thomas.mair86@googlemail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-18 17:47:40 +00:00
/*
* Realtek RTL2832 DVB-T demodulator driver
*
* Copyright (C) 2012 Thomas Mair <thomas.mair86@gmail.com>
[media] rtl2832: claim copyright and module author I have implemented tons of things for that driver, more than anyone else, so lets claim copyright and module authorship. Cc: Thomas Mair <thomas.mair86@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-16 16:54:23 +00:00
* Copyright (C) 2012-2014 Antti Palosaari <crope@iki.fi>
[media] RTL2832 DVB-T demodulator driver Changelog for ver. 0.5: - fixed code style and naming errors Changelog for ver. 0.4: - removed statistics as their calculation was wrong - fixed bug in Makefile - indentation and code style improvements Signed-off-by: Thomas Mair <thomas.mair86@googlemail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-18 17:47:40 +00:00
*/
#ifndef RTL2832_PRIV_H
#define RTL2832_PRIV_H
[media] rtl2832: convert to regmap API Use regmap to cover register access routines. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-14 07:45:57 +00:00
#include <linux/regmap.h>
[media] rtl2832: wrap DVBv5 CNR to DVBv3 SNR Change legacy DVBv3 read SNR to return values calculated by DVBv5 statistics. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-14 13:05:49 +00:00
#include <linux/math64.h>
[media] rtl2832: cleanups and minor changes Remove all the stuff that is not needed anymore. Rename variable. Remove extra new lines. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-16 16:37:18 +00:00
#include <linux/bitops.h>
media: move dvb kAPI headers to include/media Except for DVB, all media kAPI headers are at include/media. Move the headers to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-28 18:03:51 +00:00
#include <media/dvb_frontend.h>
#include <media/dvb_math.h>
[media] rtl2832: cleanups and minor changes Remove all the stuff that is not needed anymore. Rename variable. Remove extra new lines. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-16 16:37:18 +00:00
#include "rtl2832.h"
[media] RTL2832 DVB-T demodulator driver Changelog for ver. 0.5: - fixed code style and naming errors Changelog for ver. 0.4: - removed statistics as their calculation was wrong - fixed bug in Makefile - indentation and code style improvements Signed-off-by: Thomas Mair <thomas.mair86@googlemail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-18 17:47:40 +00:00
[media] rtl2832: rename driver state variable from 'priv' to 'dev' Rename it device state variable to dev. Both priv and dev are very common terms for such variable in kernel, but I like use dev in order to keep drivers consistent. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-13 03:37:43 +00:00
struct rtl2832_dev {
[media] rtl2832: move all configuration to platform data struct Move all needed configuration values to platform data structure and remove old configuration code where possible. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-13 08:26:27 +00:00
struct rtl2832_platform_data *pdata;
[media] rtl2832: convert driver to I2C binding Convert that driver to I2C driver model. Legacy DVB binding is left also for later removal... Tested-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02 13:55:17 +00:00
struct i2c_client *client;
[media] rtl2832: implement own lock for regmap Introduce own lock to silence lockdep warning. lockdep validator makes wrong decision when two similar (&map->mutex) locks were taken recursively, even those are different mutexes in a two different drivers. After that patch, functionality remains same, but mutex names are different. That is a temporary hack, proper solution is make regmap aware of locked nested locking rules. ============================================= [ INFO: possible recursive locking detected ] 3.18.0-rc4+ #4 Tainted: G O --------------------------------------------- kdvb-ad-0-fe-0/2814 is trying to acquire lock: (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40 but task is already holding lock: (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&map->mutex); lock(&map->mutex); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by kdvb-ad-0-fe-0/2814: #0: (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40 stack backtrace: CPU: 3 PID: 2814 Comm: kdvb-ad-0-fe-0 Tainted: G O 3.18.0-rc4+ #4 Hardware name: System manufacturer System Product Name/M5A78L-M/USB3, BIOS 2001 09/11/2014 0000000000000000 00000000410c8772 ffff880293af3868 ffffffff817a6f82 0000000000000000 ffff8800b3462be0 ffff880293af3968 ffffffff810e7f94 ffff880293af3888 00000000410c8772 ffffffff82dfee60 ffffffff81ab8f89 Call Trace: [<ffffffff817a6f82>] dump_stack+0x4e/0x68 [<ffffffff810e7f94>] __lock_acquire+0x1ea4/0x1f50 [<ffffffff810e2a7d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff817b01f3>] ? _raw_spin_lock_irqsave+0x83/0xa0 [<ffffffff810e13e6>] ? up+0x16/0x50 [<ffffffff810e2a7d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff817af8bf>] ? _raw_spin_unlock_irqrestore+0x5f/0x70 [<ffffffff810e9069>] lock_acquire+0xc9/0x170 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40 [<ffffffff817ab50e>] mutex_lock_nested+0x7e/0x430 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40 [<ffffffff817a530b>] ? printk+0x70/0x86 [<ffffffff8110d9e8>] ? mod_timer+0x168/0x240 [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40 [<ffffffff814f08d9>] regmap_update_bits+0x29/0x60 [<ffffffffa03e9778>] rtl2832_select+0x38/0x70 [rtl2832] [<ffffffffa039b03d>] i2c_mux_master_xfer+0x3d/0x90 [i2c_mux] [<ffffffff815da493>] __i2c_transfer+0x73/0x2e0 [<ffffffff815dbaba>] i2c_transfer+0x5a/0xc0 [<ffffffff815dbb6e>] i2c_master_send+0x4e/0x70 [<ffffffffa03ff25a>] regmap_i2c_write+0x1a/0x50 [regmap_i2c] [<ffffffff817ab713>] ? mutex_lock_nested+0x283/0x430 [<ffffffff814f06b2>] _regmap_raw_write+0x862/0x880 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40 [<ffffffff814f0744>] _regmap_bus_raw_write+0x74/0xa0 [<ffffffff814ef3d2>] _regmap_write+0x92/0x140 [<ffffffff814f0b7b>] regmap_write+0x4b/0x70 [<ffffffffa032b090>] ? dvb_frontend_release+0x110/0x110 [dvb_core] [<ffffffffa05141d4>] e4000_init+0x34/0x210 [e4000] [<ffffffffa032a029>] dvb_frontend_init+0x59/0xc0 [dvb_core] [<ffffffff810bde30>] ? finish_task_switch+0x80/0x180 [<ffffffff810bddf2>] ? finish_task_switch+0x42/0x180 [<ffffffffa032b116>] dvb_frontend_thread+0x86/0x7b0 [dvb_core] [<ffffffff817a9203>] ? __schedule+0x343/0x930 [<ffffffffa032b090>] ? dvb_frontend_release+0x110/0x110 [dvb_core] [<ffffffff810b826b>] kthread+0x10b/0x130 [<ffffffff81020099>] ? sched_clock+0x9/0x10 [<ffffffff810b8160>] ? kthread_create_on_node+0x250/0x250 [<ffffffff817b063c>] ret_from_fork+0x7c/0xb0 [<ffffffff810b8160>] ? kthread_create_on_node+0x250/0x250 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-18 10:22:46 +00:00
struct regmap_config regmap_config;
[media] rtl2832: convert to regmap API Use regmap to cover register access routines. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-14 07:45:57 +00:00
struct regmap *regmap;
[media] rtl2832: convert to use an explicit i2c mux core Allocate an explicit i2c mux core to handle parent and child adapters etc. Update the select/deselect ops to be in terms of the i2c mux core instead of the child adapter. Tested-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-20 06:41:25 +00:00
struct i2c_mux_core *muxc;
[media] RTL2832 DVB-T demodulator driver Changelog for ver. 0.5: - fixed code style and naming errors Changelog for ver. 0.4: - removed statistics as their calculation was wrong - fixed bug in Makefile - indentation and code style improvements Signed-off-by: Thomas Mair <thomas.mair86@googlemail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-18 17:47:40 +00:00
struct dvb_frontend fe;
[media] dvb: Get rid of typedev usage for enums The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace. So, let's do it. This patch was generated by this shell script: for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done While here, make CodingStyle fixes on the affected lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
2015-06-07 17:53:52 +00:00
enum fe_status fe_status;
[media] rtl2832: wrap DVBv5 BER to DVBv3 Change legacy DVBv3 read BER to return values calculated by DVBv5 statistics. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-14 13:10:22 +00:00
u64 post_bit_error_prev; /* for old DVBv3 read_ber() calculation */
[media] rtl2832: implement DVBv5 BER statistic DVBv5 BER. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-14 12:59:20 +00:00
u64 post_bit_error;
u64 post_bit_count;
[media] RTL2832 DVB-T demodulator driver Changelog for ver. 0.5: - fixed code style and naming errors Changelog for ver. 0.4: - removed statistics as their calculation was wrong - fixed bug in Makefile - indentation and code style improvements Signed-off-by: Thomas Mair <thomas.mair86@googlemail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-18 17:47:40 +00:00
bool sleeping;
[media] rtl2832: implement delayed I2C gate close Delay possible I2C gate close a little bit in order to see if there is next message coming to tuner in a sequence. Also, export private muxed I2C adapter. That is aimed only for SDR extension module as SDR belongs to same RTL2832 physical I2C bus (it is physically property of RTL2832, whilst it is own kernel module). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-08 06:50:04 +00:00
struct delayed_work i2c_gate_work;
[media] rtl2832: implement PID filter Implement PID filter. This demod has PID filter size of 32 PIDs. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-14 17:07:35 +00:00
unsigned long filters; /* PID filter */
[media] rtl2832: add support for slave ts pid filter The rtl2832 demod has 2 sets of PID filters. This patch enables the filter support when using a slave demod. Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-06-07 21:31:47 +00:00
bool slave_ts;
[media] RTL2832 DVB-T demodulator driver Changelog for ver. 0.5: - fixed code style and naming errors Changelog for ver. 0.4: - removed statistics as their calculation was wrong - fixed bug in Makefile - indentation and code style improvements Signed-off-by: Thomas Mair <thomas.mair86@googlemail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-18 17:47:40 +00:00
};
struct rtl2832_reg_entry {
[media] rtl2832: merge reg page as a part of reg address Chips uses 8-bit register addresses with 5 pages. Extend register address by using register page as a first byte of address, defining virtual register addresses. That is common method of handling register pages and regmap also uses it. Remove page + address conversion glue which was there for regmap. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-15 04:17:25 +00:00
u16 start_address;
[media] RTL2832 DVB-T demodulator driver Changelog for ver. 0.5: - fixed code style and naming errors Changelog for ver. 0.4: - removed statistics as their calculation was wrong - fixed bug in Makefile - indentation and code style improvements Signed-off-by: Thomas Mair <thomas.mair86@googlemail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-18 17:47:40 +00:00
u8 msb;
u8 lsb;
};
struct rtl2832_reg_value {
int reg;
u32 value;
};
/* Demod register bit names */
enum DVBT_REG_BIT_NAME {
DVBT_SOFT_RST,
DVBT_IIC_REPEAT,
DVBT_TR_WAIT_MIN_8K,
DVBT_RSD_BER_FAIL_VAL,
DVBT_EN_BK_TRK,
DVBT_REG_PI,
DVBT_REG_PFREQ_1_0,
DVBT_PD_DA8,
DVBT_LOCK_TH,
DVBT_BER_PASS_SCAL,
DVBT_CE_FFSM_BYPASS,
DVBT_ALPHAIIR_N,
DVBT_ALPHAIIR_DIF,
DVBT_EN_TRK_SPAN,
DVBT_LOCK_TH_LEN,
DVBT_CCI_THRE,
DVBT_CCI_MON_SCAL,
DVBT_CCI_M0,
DVBT_CCI_M1,
DVBT_CCI_M2,
DVBT_CCI_M3,
DVBT_SPEC_INIT_0,
DVBT_SPEC_INIT_1,
DVBT_SPEC_INIT_2,
DVBT_AD_EN_REG,
DVBT_AD_EN_REG1,
DVBT_EN_BBIN,
DVBT_MGD_THD0,
DVBT_MGD_THD1,
DVBT_MGD_THD2,
DVBT_MGD_THD3,
DVBT_MGD_THD4,
DVBT_MGD_THD5,
DVBT_MGD_THD6,
DVBT_MGD_THD7,
DVBT_EN_CACQ_NOTCH,
DVBT_AD_AV_REF,
DVBT_PIP_ON,
DVBT_SCALE1_B92,
DVBT_SCALE1_B93,
DVBT_SCALE1_BA7,
DVBT_SCALE1_BA9,
DVBT_SCALE1_BAA,
DVBT_SCALE1_BAB,
DVBT_SCALE1_BAC,
DVBT_SCALE1_BB0,
DVBT_SCALE1_BB1,
DVBT_KB_P1,
DVBT_KB_P2,
DVBT_KB_P3,
DVBT_OPT_ADC_IQ,
DVBT_AD_AVI,
DVBT_AD_AVQ,
DVBT_K1_CR_STEP12,
DVBT_TRK_KS_P2,
DVBT_TRK_KS_I2,
DVBT_TR_THD_SET2,
DVBT_TRK_KC_P2,
DVBT_TRK_KC_I2,
DVBT_CR_THD_SET2,
DVBT_PSET_IFFREQ,
DVBT_SPEC_INV,
DVBT_BW_INDEX,
DVBT_RSAMP_RATIO,
DVBT_CFREQ_OFF_RATIO,
DVBT_FSM_STAGE,
DVBT_RX_CONSTEL,
DVBT_RX_HIER,
DVBT_RX_C_RATE_LP,
DVBT_RX_C_RATE_HP,
DVBT_GI_IDX,
DVBT_FFT_MODE_IDX,
DVBT_RSD_BER_EST,
DVBT_CE_EST_EVM,
DVBT_RF_AGC_VAL,
DVBT_IF_AGC_VAL,
DVBT_DAGC_VAL,
DVBT_SFREQ_OFF,
DVBT_CFREQ_OFF,
DVBT_POLAR_RF_AGC,
DVBT_POLAR_IF_AGC,
DVBT_AAGC_HOLD,
DVBT_EN_RF_AGC,
DVBT_EN_IF_AGC,
DVBT_IF_AGC_MIN,
DVBT_IF_AGC_MAX,
DVBT_RF_AGC_MIN,
DVBT_RF_AGC_MAX,
DVBT_IF_AGC_MAN,
DVBT_IF_AGC_MAN_VAL,
DVBT_RF_AGC_MAN,
DVBT_RF_AGC_MAN_VAL,
DVBT_DAGC_TRG_VAL,
DVBT_AGC_TARG_VAL,
DVBT_LOOP_GAIN_3_0,
DVBT_LOOP_GAIN_4,
DVBT_VTOP,
DVBT_KRF,
DVBT_AGC_TARG_VAL_0,
DVBT_AGC_TARG_VAL_8_1,
DVBT_AAGC_LOOP_GAIN,
DVBT_LOOP_GAIN2_3_0,
DVBT_LOOP_GAIN2_4,
DVBT_LOOP_GAIN3,
DVBT_VTOP1,
DVBT_VTOP2,
DVBT_VTOP3,
DVBT_KRF1,
DVBT_KRF2,
DVBT_KRF3,
DVBT_KRF4,
DVBT_EN_GI_PGA,
DVBT_THD_LOCK_UP,
DVBT_THD_LOCK_DW,
DVBT_THD_UP1,
DVBT_THD_DW1,
DVBT_INTER_CNT_LEN,
DVBT_GI_PGA_STATE,
DVBT_EN_AGC_PGA,
DVBT_CKOUTPAR,
DVBT_CKOUT_PWR,
DVBT_SYNC_DUR,
DVBT_ERR_DUR,
DVBT_SYNC_LVL,
DVBT_ERR_LVL,
DVBT_VAL_LVL,
DVBT_SERIAL,
DVBT_SER_LSB,
DVBT_CDIV_PH0,
DVBT_CDIV_PH1,
DVBT_MPEG_IO_OPT_2_2,
DVBT_MPEG_IO_OPT_1_0,
DVBT_CKOUTPAR_PIP,
DVBT_CKOUT_PWR_PIP,
DVBT_SYNC_LVL_PIP,
DVBT_ERR_LVL_PIP,
DVBT_VAL_LVL_PIP,
DVBT_CKOUTPAR_PID,
DVBT_CKOUT_PWR_PID,
DVBT_SYNC_LVL_PID,
DVBT_ERR_LVL_PID,
DVBT_VAL_LVL_PID,
DVBT_SM_PASS,
DVBT_UPDATE_REG_2,
DVBT_BTHD_P3,
DVBT_BTHD_D3,
DVBT_FUNC4_REG0,
DVBT_FUNC4_REG1,
DVBT_FUNC4_REG2,
DVBT_FUNC4_REG3,
DVBT_FUNC4_REG4,
DVBT_FUNC4_REG5,
DVBT_FUNC4_REG6,
DVBT_FUNC4_REG7,
DVBT_FUNC4_REG8,
DVBT_FUNC4_REG9,
DVBT_FUNC4_REG10,
DVBT_FUNC5_REG0,
DVBT_FUNC5_REG1,
DVBT_FUNC5_REG2,
DVBT_FUNC5_REG3,
DVBT_FUNC5_REG4,
DVBT_FUNC5_REG5,
DVBT_FUNC5_REG6,
DVBT_FUNC5_REG7,
DVBT_FUNC5_REG8,
DVBT_FUNC5_REG9,
DVBT_FUNC5_REG10,
DVBT_FUNC5_REG11,
DVBT_FUNC5_REG12,
DVBT_FUNC5_REG13,
DVBT_FUNC5_REG14,
DVBT_FUNC5_REG15,
DVBT_FUNC5_REG16,
DVBT_FUNC5_REG17,
DVBT_FUNC5_REG18,
DVBT_AD7_SETTING,
DVBT_RSSI_R,
DVBT_ACI_DET_IND,
DVBT_REG_MON,
DVBT_REG_MONSEL,
DVBT_REG_GPE,
DVBT_REG_GPO,
DVBT_REG_4MSEL,
DVBT_TEST_REG_1,
DVBT_TEST_REG_2,
DVBT_TEST_REG_3,
DVBT_TEST_REG_4,
DVBT_REG_BIT_NAME_ITEM_TERMINATOR,
};
[media] rtl2832: add inittab for FC2580 tuner Add reg/val inittab for FC2580 tuner. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-24 01:52:07 +00:00
static const struct rtl2832_reg_value rtl2832_tuner_init_fc2580[] = {
{DVBT_DAGC_TRG_VAL, 0x39},
{DVBT_AGC_TARG_VAL_0, 0x0},
{DVBT_AGC_TARG_VAL_8_1, 0x5a},
{DVBT_AAGC_LOOP_GAIN, 0x16},
{DVBT_LOOP_GAIN2_3_0, 0x6},
{DVBT_LOOP_GAIN2_4, 0x1},
{DVBT_LOOP_GAIN3, 0x16},
{DVBT_VTOP1, 0x35},
{DVBT_VTOP2, 0x21},
{DVBT_VTOP3, 0x21},
{DVBT_KRF1, 0x0},
{DVBT_KRF2, 0x40},
{DVBT_KRF3, 0x10},
{DVBT_KRF4, 0x10},
{DVBT_IF_AGC_MIN, 0x80},
{DVBT_IF_AGC_MAX, 0x7f},
{DVBT_RF_AGC_MIN, 0x9c},
{DVBT_RF_AGC_MAX, 0x7f},
{DVBT_POLAR_RF_AGC, 0x0},
{DVBT_POLAR_IF_AGC, 0x0},
{DVBT_AD7_SETTING, 0xe9f4},
};
[media] rtl2832: support for tua9001 tuner Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-12 01:27:08 +00:00
static const struct rtl2832_reg_value rtl2832_tuner_init_tua9001[] = {
{DVBT_DAGC_TRG_VAL, 0x39},
{DVBT_AGC_TARG_VAL_0, 0x0},
{DVBT_AGC_TARG_VAL_8_1, 0x5a},
{DVBT_AAGC_LOOP_GAIN, 0x16},
{DVBT_LOOP_GAIN2_3_0, 0x6},
{DVBT_LOOP_GAIN2_4, 0x1},
{DVBT_LOOP_GAIN3, 0x16},
{DVBT_VTOP1, 0x35},
{DVBT_VTOP2, 0x21},
{DVBT_VTOP3, 0x21},
{DVBT_KRF1, 0x0},
{DVBT_KRF2, 0x40},
{DVBT_KRF3, 0x10},
{DVBT_KRF4, 0x10},
{DVBT_IF_AGC_MIN, 0x80},
{DVBT_IF_AGC_MAX, 0x7f},
{DVBT_RF_AGC_MIN, 0x9c},
{DVBT_RF_AGC_MAX, 0x7f},
{DVBT_POLAR_RF_AGC, 0x0},
{DVBT_POLAR_IF_AGC, 0x0},
{DVBT_AD7_SETTING, 0xe9f4},
{DVBT_OPT_ADC_IQ, 0x1},
{DVBT_AD_AVI, 0x0},
{DVBT_AD_AVQ, 0x0},
[media] rtl2832: style changes and minor cleanup Most of those were reported by checkpatch.pl... debug module parameter is not used anywhere so remove it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-13 03:06:44 +00:00
{DVBT_SPEC_INV, 0x0},
[media] rtl2832: support for tua9001 tuner Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-12 01:27:08 +00:00
};
[media] rtl2832: separate tuner specific init from general It is first step closer to support multiple tuners. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-12 01:27:04 +00:00
static const struct rtl2832_reg_value rtl2832_tuner_init_fc0012[] = {
{DVBT_DAGC_TRG_VAL, 0x5a},
{DVBT_AGC_TARG_VAL_0, 0x0},
{DVBT_AGC_TARG_VAL_8_1, 0x5a},
{DVBT_AAGC_LOOP_GAIN, 0x16},
{DVBT_LOOP_GAIN2_3_0, 0x6},
{DVBT_LOOP_GAIN2_4, 0x1},
{DVBT_LOOP_GAIN3, 0x16},
{DVBT_VTOP1, 0x35},
{DVBT_VTOP2, 0x21},
{DVBT_VTOP3, 0x21},
{DVBT_KRF1, 0x0},
{DVBT_KRF2, 0x40},
{DVBT_KRF3, 0x10},
{DVBT_KRF4, 0x10},
{DVBT_IF_AGC_MIN, 0x80},
{DVBT_IF_AGC_MAX, 0x7f},
{DVBT_RF_AGC_MIN, 0x80},
{DVBT_RF_AGC_MAX, 0x7f},
{DVBT_POLAR_RF_AGC, 0x0},
{DVBT_POLAR_IF_AGC, 0x0},
{DVBT_AD7_SETTING, 0xe9bf},
{DVBT_EN_GI_PGA, 0x0},
{DVBT_THD_LOCK_UP, 0x0},
{DVBT_THD_LOCK_DW, 0x0},
{DVBT_THD_UP1, 0x11},
{DVBT_THD_DW1, 0xef},
{DVBT_INTER_CNT_LEN, 0xc},
{DVBT_GI_PGA_STATE, 0x0},
{DVBT_EN_AGC_PGA, 0x1},
{DVBT_IF_AGC_MAN, 0x0},
[media] rtl2832: style changes and minor cleanup Most of those were reported by checkpatch.pl... debug module parameter is not used anywhere so remove it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-13 03:06:44 +00:00
{DVBT_SPEC_INV, 0x0},
[media] rtl2832: separate tuner specific init from general It is first step closer to support multiple tuners. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-12 01:27:04 +00:00
};
[media] rtl2832: add configuration for e4000 tuner Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-17 20:53:04 +00:00
static const struct rtl2832_reg_value rtl2832_tuner_init_e4000[] = {
{DVBT_DAGC_TRG_VAL, 0x5a},
{DVBT_AGC_TARG_VAL_0, 0x0},
{DVBT_AGC_TARG_VAL_8_1, 0x5a},
{DVBT_AAGC_LOOP_GAIN, 0x18},
{DVBT_LOOP_GAIN2_3_0, 0x8},
{DVBT_LOOP_GAIN2_4, 0x1},
{DVBT_LOOP_GAIN3, 0x18},
{DVBT_VTOP1, 0x35},
{DVBT_VTOP2, 0x21},
{DVBT_VTOP3, 0x21},
{DVBT_KRF1, 0x0},
{DVBT_KRF2, 0x40},
{DVBT_KRF3, 0x10},
{DVBT_KRF4, 0x10},
{DVBT_IF_AGC_MIN, 0x80},
{DVBT_IF_AGC_MAX, 0x7f},
{DVBT_RF_AGC_MIN, 0x80},
{DVBT_RF_AGC_MAX, 0x7f},
{DVBT_POLAR_RF_AGC, 0x0},
{DVBT_POLAR_IF_AGC, 0x0},
{DVBT_AD7_SETTING, 0xe9d4},
{DVBT_EN_GI_PGA, 0x0},
{DVBT_THD_LOCK_UP, 0x0},
{DVBT_THD_LOCK_DW, 0x0},
{DVBT_THD_UP1, 0x14},
{DVBT_THD_DW1, 0xec},
{DVBT_INTER_CNT_LEN, 0xc},
{DVBT_GI_PGA_STATE, 0x0},
{DVBT_EN_AGC_PGA, 0x1},
{DVBT_REG_GPE, 0x1},
{DVBT_REG_GPO, 0x1},
{DVBT_REG_MONSEL, 0x1},
{DVBT_REG_MON, 0x1},
{DVBT_REG_4MSEL, 0x0},
[media] rtl2832: style changes and minor cleanup Most of those were reported by checkpatch.pl... debug module parameter is not used anywhere so remove it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-13 03:06:44 +00:00
{DVBT_SPEC_INV, 0x0},
[media] rtl2832: add code to bind r820t on it There are some init stuff to be done for each new tuner at the demod code. Add the code there for r820t. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Antti Palosaari <crope@iki.fi>
2013-04-09 21:19:50 +00:00
};
static const struct rtl2832_reg_value rtl2832_tuner_init_r820t[] = {
[media] rtl2832: style changes and minor cleanup Most of those were reported by checkpatch.pl... debug module parameter is not used anywhere so remove it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-13 03:06:44 +00:00
{DVBT_DAGC_TRG_VAL, 0x39},
{DVBT_AGC_TARG_VAL_0, 0x0},
{DVBT_AGC_TARG_VAL_8_1, 0x40},
{DVBT_AAGC_LOOP_GAIN, 0x16},
{DVBT_LOOP_GAIN2_3_0, 0x8},
{DVBT_LOOP_GAIN2_4, 0x1},
{DVBT_LOOP_GAIN3, 0x18},
{DVBT_VTOP1, 0x35},
{DVBT_VTOP2, 0x21},
{DVBT_VTOP3, 0x21},
{DVBT_KRF1, 0x0},
{DVBT_KRF2, 0x40},
{DVBT_KRF3, 0x10},
{DVBT_KRF4, 0x10},
{DVBT_IF_AGC_MIN, 0x80},
{DVBT_IF_AGC_MAX, 0x7f},
{DVBT_RF_AGC_MIN, 0x80},
{DVBT_RF_AGC_MAX, 0x7f},
{DVBT_POLAR_RF_AGC, 0x0},
{DVBT_POLAR_IF_AGC, 0x0},
{DVBT_AD7_SETTING, 0xe9f4},
{DVBT_SPEC_INV, 0x1},
[media] rtl2832: add configuration for e4000 tuner Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-17 20:53:04 +00:00
};
[media] rtl2832: add support for GoTView MasterHD 3 USB tuner GoTView MasterHD 3 is a DVB-T2/C USB 2.0 tuner. It's based on the following components: - USB bridge: RTL2832P (contains also DVB-T demodulator) - Demodulator: Si2168-A30 - Tuner: Si2148-A20 The demodulator and the tuner will need firmwares. The Si2148 uses Si2158 firmware. Antti has the firmwares available for download: http://palosaari.fi/linux/v4l-dvb/firmware/ Do note that for DVB-T either of the demodulators can be used. DVB-C and DVB-T2 are only supported by the Si2168 demodulator. The driver will register 2 frontends for the same adapter. Frontend 0 will be the RTL2832 demodulator and frontend 1 will be the Si2168 demodulator. The same tuner is used for both. As a consequence of the above, it's recommended to use application that does implement proper DVBv5 support. For some reason, the old I2C write method sporadically fails. Thus the need for an option to only use the new I2C write method supported by the RTL2832. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-05 16:54:19 +00:00
static const struct rtl2832_reg_value rtl2832_tuner_init_si2157[] = {
{DVBT_DAGC_TRG_VAL, 0x39},
{DVBT_AGC_TARG_VAL_0, 0x0},
{DVBT_AGC_TARG_VAL_8_1, 0x40},
{DVBT_AAGC_LOOP_GAIN, 0x16},
{DVBT_LOOP_GAIN2_3_0, 0x8},
{DVBT_LOOP_GAIN2_4, 0x1},
{DVBT_LOOP_GAIN3, 0x18},
{DVBT_VTOP1, 0x35},
{DVBT_VTOP2, 0x21},
{DVBT_VTOP3, 0x21},
{DVBT_KRF1, 0x0},
{DVBT_KRF2, 0x40},
{DVBT_KRF3, 0x10},
{DVBT_KRF4, 0x10},
{DVBT_IF_AGC_MIN, 0x80},
{DVBT_IF_AGC_MAX, 0x7f},
{DVBT_RF_AGC_MIN, 0x80},
{DVBT_RF_AGC_MAX, 0x7f},
{DVBT_POLAR_RF_AGC, 0x0},
{DVBT_POLAR_IF_AGC, 0x0},
{DVBT_AD7_SETTING, 0xe9f4},
{DVBT_SPEC_INV, 0x0},
};
[media] RTL2832 DVB-T demodulator driver Changelog for ver. 0.5: - fixed code style and naming errors Changelog for ver. 0.4: - removed statistics as their calculation was wrong - fixed bug in Makefile - indentation and code style improvements Signed-off-by: Thomas Mair <thomas.mair86@googlemail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-18 17:47:40 +00:00
#endif /* RTL2832_PRIV_H */
Reference in New Issue Copy Permalink