linux/lib/vdso/gettimeofday.c

403 lines
9.6 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Generic userspace implementations of gettimeofday() and similar.
*/
#include <linux/compiler.h>
#include <linux/math64.h>
#include <linux/time.h>
#include <linux/kernel.h>
#include <linux/hrtimer_defs.h>
#include <linux/clocksource.h>
#include <vdso/datapage.h>
#include <vdso/helpers.h>
/*
* The generic vDSO implementation requires that gettimeofday.h
* provides:
* - __arch_get_vdso_data(): to get the vdso datapage.
* - __arch_get_hw_counter(): to get the hw counter based on the
* clock_mode.
* - gettimeofday_fallback(): fallback for gettimeofday.
* - clock_gettime_fallback(): fallback for clock_gettime.
* - clock_getres_fallback(): fallback for clock_getres.
*/
#ifdef ENABLE_COMPAT_VDSO
#include <asm/vdso/compat_gettimeofday.h>
#else
#include <asm/vdso/gettimeofday.h>
#endif /* ENABLE_COMPAT_VDSO */
lib/vdso: Make delta calculation work correctly The x86 vdso implementation on which the generic vdso library is based on has subtle (unfortunately undocumented) twists: 1) The code assumes that the clocksource mask is U64_MAX which means that no bits are masked. Which is true for any valid x86 VDSO clocksource. Stupidly it still did the mask operation for no reason and at the wrong place right after reading the clocksource. 2) It contains a sanity check to catch the case where slightly unsynchronized TSC values can be observed which would cause the delta calculation to make a huge jump. It therefore checks whether the current TSC value is larger than the value on which the current conversion is based on. If it's not larger the base value is used to prevent time jumps. #1 Is not only stupid for the X86 case because it does the masking for no reason it is also completely wrong for clocksources with a smaller mask which can legitimately wrap around during a conversion period. The core timekeeping code does it correct by applying the mask after the delta calculation: (now - base) & mask #2 is equally broken for clocksources which have smaller masks and can wrap around during a conversion period because there the now > base check is just wrong and causes stale time stamps and time going backwards issues. Unbreak it by: 1) Removing the mask operation from the clocksource read which makes the fallback detection work for all clocksources 2) Replacing the conditional delta calculation with a overrideable inline function. #2 could reuse clocksource_delta() from the timekeeping code but that results in a significant performance hit for the x86 VSDO. The timekeeping core code must have the non optimized version as it has to operate correctly with clocksources which have smaller masks as well to handle the case where TSC is discarded as timekeeper clocksource and replaced by HPET or pmtimer. For the VDSO there is no replacement clocksource. If TSC is unusable the syscall is enforced which does the right thing. To accommodate to the needs of various architectures provide an override-able inline function which defaults to the regular delta calculation with masking: (now - base) & mask Override it for x86 with the non-masking and checking version. This unbreaks the ARM64 syscall fallback operation, allows to use clocksources with arbitrary width and preserves the performance optimization for x86. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: linux-arch@vger.kernel.org Cc: LAK <linux-arm-kernel@lists.infradead.org> Cc: linux-mips@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: catalin.marinas@arm.com Cc: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux@armlinux.org.uk Cc: Ralf Baechle <ralf@linux-mips.org> Cc: paul.burton@mips.com Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: salyzyn@android.com Cc: pcc@google.com Cc: shuah@kernel.org Cc: 0x7f454c46@gmail.com Cc: linux@rasmusvillemoes.dk Cc: huw@codeweavers.com Cc: sthotton@marvell.com Cc: andre.przywara@arm.com Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906261159230.32342@nanos.tec.linutronix.de
2019-06-26 10:02:00 +00:00
#ifndef vdso_calc_delta
/*
* Default implementation which works for all sane clocksources. That
* obviously excludes x86/TSC.
*/
static __always_inline
u64 vdso_calc_delta(u64 cycles, u64 last, u64 mask, u32 mult)
{
return ((cycles - last) & mask) * mult;
}
#endif
#ifndef __arch_vdso_hres_capable
static inline bool __arch_vdso_hres_capable(void)
{
return true;
}
#endif
#ifndef vdso_clocksource_ok
static inline bool vdso_clocksource_ok(const struct vdso_data *vd)
{
return vd->clock_mode != VDSO_CLOCKMODE_NONE;
}
#endif
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
#ifdef CONFIG_TIME_NS
static int do_hres_timens(const struct vdso_data *vdns, clockid_t clk,
struct __kernel_timespec *ts)
{
const struct vdso_data *vd = __arch_get_timens_vdso_data();
const struct timens_offset *offs = &vdns->offset[clk];
const struct vdso_timestamp *vdso_ts;
u64 cycles, last, ns;
u32 seq;
s64 sec;
if (clk != CLOCK_MONOTONIC_RAW)
vd = &vd[CS_HRES_COARSE];
else
vd = &vd[CS_RAW];
vdso_ts = &vd->basetime[clk];
do {
seq = vdso_read_begin(vd);
if (unlikely(!vdso_clocksource_ok(vd)))
return -1;
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
cycles = __arch_get_hw_counter(vd->clock_mode);
ns = vdso_ts->nsec;
last = vd->cycle_last;
ns += vdso_calc_delta(cycles, last, vd->mask, vd->mult);
ns >>= vd->shift;
sec = vdso_ts->sec;
} while (unlikely(vdso_read_retry(vd, seq)));
/* Add the namespace offset */
sec += offs->sec;
ns += offs->nsec;
/*
* Do this outside the loop: a race inside the loop could result
* in __iter_div_u64_rem() being extremely slow.
*/
ts->tv_sec = sec + __iter_div_u64_rem(ns, NSEC_PER_SEC, &ns);
ts->tv_nsec = ns;
return 0;
}
#else
static __always_inline const struct vdso_data *__arch_get_timens_vdso_data(void)
{
return NULL;
}
static int do_hres_timens(const struct vdso_data *vdns, clockid_t clk,
struct __kernel_timespec *ts)
{
return -EINVAL;
}
#endif
static __always_inline int do_hres(const struct vdso_data *vd, clockid_t clk,
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
struct __kernel_timespec *ts)
{
const struct vdso_timestamp *vdso_ts = &vd->basetime[clk];
u64 cycles, last, sec, ns;
u32 seq;
/* Allows to compile the high resolution parts out */
if (!__arch_vdso_hres_capable())
return -1;
do {
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
/*
* Open coded to handle VDSO_CLOCKMODE_TIMENS. Time namespace
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
* enabled tasks have a special VVAR page installed which
* has vd->seq set to 1 and vd->clock_mode set to
* VDSO_CLOCKMODE_TIMENS. For non time namespace affected tasks
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
* this does not affect performance because if vd->seq is
* odd, i.e. a concurrent update is in progress the extra
* check for vd->clock_mode is just a few extra
* instructions while spin waiting for vd->seq to become
* even again.
*/
while (unlikely((seq = READ_ONCE(vd->seq)) & 1)) {
if (IS_ENABLED(CONFIG_TIME_NS) &&
vd->clock_mode == VDSO_CLOCKMODE_TIMENS)
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
return do_hres_timens(vd, clk, ts);
cpu_relax();
}
smp_rmb();
if (unlikely(!vdso_clocksource_ok(vd)))
return -1;
lib/vdso: Make delta calculation work correctly The x86 vdso implementation on which the generic vdso library is based on has subtle (unfortunately undocumented) twists: 1) The code assumes that the clocksource mask is U64_MAX which means that no bits are masked. Which is true for any valid x86 VDSO clocksource. Stupidly it still did the mask operation for no reason and at the wrong place right after reading the clocksource. 2) It contains a sanity check to catch the case where slightly unsynchronized TSC values can be observed which would cause the delta calculation to make a huge jump. It therefore checks whether the current TSC value is larger than the value on which the current conversion is based on. If it's not larger the base value is used to prevent time jumps. #1 Is not only stupid for the X86 case because it does the masking for no reason it is also completely wrong for clocksources with a smaller mask which can legitimately wrap around during a conversion period. The core timekeeping code does it correct by applying the mask after the delta calculation: (now - base) & mask #2 is equally broken for clocksources which have smaller masks and can wrap around during a conversion period because there the now > base check is just wrong and causes stale time stamps and time going backwards issues. Unbreak it by: 1) Removing the mask operation from the clocksource read which makes the fallback detection work for all clocksources 2) Replacing the conditional delta calculation with a overrideable inline function. #2 could reuse clocksource_delta() from the timekeeping code but that results in a significant performance hit for the x86 VSDO. The timekeeping core code must have the non optimized version as it has to operate correctly with clocksources which have smaller masks as well to handle the case where TSC is discarded as timekeeper clocksource and replaced by HPET or pmtimer. For the VDSO there is no replacement clocksource. If TSC is unusable the syscall is enforced which does the right thing. To accommodate to the needs of various architectures provide an override-able inline function which defaults to the regular delta calculation with masking: (now - base) & mask Override it for x86 with the non-masking and checking version. This unbreaks the ARM64 syscall fallback operation, allows to use clocksources with arbitrary width and preserves the performance optimization for x86. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: linux-arch@vger.kernel.org Cc: LAK <linux-arm-kernel@lists.infradead.org> Cc: linux-mips@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: catalin.marinas@arm.com Cc: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux@armlinux.org.uk Cc: Ralf Baechle <ralf@linux-mips.org> Cc: paul.burton@mips.com Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: salyzyn@android.com Cc: pcc@google.com Cc: shuah@kernel.org Cc: 0x7f454c46@gmail.com Cc: linux@rasmusvillemoes.dk Cc: huw@codeweavers.com Cc: sthotton@marvell.com Cc: andre.przywara@arm.com Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906261159230.32342@nanos.tec.linutronix.de
2019-06-26 10:02:00 +00:00
cycles = __arch_get_hw_counter(vd->clock_mode);
ns = vdso_ts->nsec;
last = vd->cycle_last;
lib/vdso: Make delta calculation work correctly The x86 vdso implementation on which the generic vdso library is based on has subtle (unfortunately undocumented) twists: 1) The code assumes that the clocksource mask is U64_MAX which means that no bits are masked. Which is true for any valid x86 VDSO clocksource. Stupidly it still did the mask operation for no reason and at the wrong place right after reading the clocksource. 2) It contains a sanity check to catch the case where slightly unsynchronized TSC values can be observed which would cause the delta calculation to make a huge jump. It therefore checks whether the current TSC value is larger than the value on which the current conversion is based on. If it's not larger the base value is used to prevent time jumps. #1 Is not only stupid for the X86 case because it does the masking for no reason it is also completely wrong for clocksources with a smaller mask which can legitimately wrap around during a conversion period. The core timekeeping code does it correct by applying the mask after the delta calculation: (now - base) & mask #2 is equally broken for clocksources which have smaller masks and can wrap around during a conversion period because there the now > base check is just wrong and causes stale time stamps and time going backwards issues. Unbreak it by: 1) Removing the mask operation from the clocksource read which makes the fallback detection work for all clocksources 2) Replacing the conditional delta calculation with a overrideable inline function. #2 could reuse clocksource_delta() from the timekeeping code but that results in a significant performance hit for the x86 VSDO. The timekeeping core code must have the non optimized version as it has to operate correctly with clocksources which have smaller masks as well to handle the case where TSC is discarded as timekeeper clocksource and replaced by HPET or pmtimer. For the VDSO there is no replacement clocksource. If TSC is unusable the syscall is enforced which does the right thing. To accommodate to the needs of various architectures provide an override-able inline function which defaults to the regular delta calculation with masking: (now - base) & mask Override it for x86 with the non-masking and checking version. This unbreaks the ARM64 syscall fallback operation, allows to use clocksources with arbitrary width and preserves the performance optimization for x86. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: linux-arch@vger.kernel.org Cc: LAK <linux-arm-kernel@lists.infradead.org> Cc: linux-mips@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: catalin.marinas@arm.com Cc: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux@armlinux.org.uk Cc: Ralf Baechle <ralf@linux-mips.org> Cc: paul.burton@mips.com Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: salyzyn@android.com Cc: pcc@google.com Cc: shuah@kernel.org Cc: 0x7f454c46@gmail.com Cc: linux@rasmusvillemoes.dk Cc: huw@codeweavers.com Cc: sthotton@marvell.com Cc: andre.przywara@arm.com Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906261159230.32342@nanos.tec.linutronix.de
2019-06-26 10:02:00 +00:00
ns += vdso_calc_delta(cycles, last, vd->mask, vd->mult);
ns >>= vd->shift;
sec = vdso_ts->sec;
} while (unlikely(vdso_read_retry(vd, seq)));
/*
* Do this outside the loop: a race inside the loop could result
* in __iter_div_u64_rem() being extremely slow.
*/
ts->tv_sec = sec + __iter_div_u64_rem(ns, NSEC_PER_SEC, &ns);
ts->tv_nsec = ns;
return 0;
}
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
#ifdef CONFIG_TIME_NS
static int do_coarse_timens(const struct vdso_data *vdns, clockid_t clk,
struct __kernel_timespec *ts)
{
const struct vdso_data *vd = __arch_get_timens_vdso_data();
const struct vdso_timestamp *vdso_ts = &vd->basetime[clk];
const struct timens_offset *offs = &vdns->offset[clk];
u64 nsec;
s64 sec;
s32 seq;
do {
seq = vdso_read_begin(vd);
sec = vdso_ts->sec;
nsec = vdso_ts->nsec;
} while (unlikely(vdso_read_retry(vd, seq)));
/* Add the namespace offset */
sec += offs->sec;
nsec += offs->nsec;
/*
* Do this outside the loop: a race inside the loop could result
* in __iter_div_u64_rem() being extremely slow.
*/
ts->tv_sec = sec + __iter_div_u64_rem(nsec, NSEC_PER_SEC, &nsec);
ts->tv_nsec = nsec;
return 0;
}
#else
static int do_coarse_timens(const struct vdso_data *vdns, clockid_t clk,
struct __kernel_timespec *ts)
{
return -1;
}
#endif
static __always_inline int do_coarse(const struct vdso_data *vd, clockid_t clk,
struct __kernel_timespec *ts)
{
const struct vdso_timestamp *vdso_ts = &vd->basetime[clk];
u32 seq;
do {
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
/*
* Open coded to handle VDSO_CLOCK_TIMENS. See comment in
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
* do_hres().
*/
while ((seq = READ_ONCE(vd->seq)) & 1) {
if (IS_ENABLED(CONFIG_TIME_NS) &&
vd->clock_mode == VDSO_CLOCKMODE_TIMENS)
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
return do_coarse_timens(vd, clk, ts);
cpu_relax();
}
smp_rmb();
ts->tv_sec = vdso_ts->sec;
ts->tv_nsec = vdso_ts->nsec;
} while (unlikely(vdso_read_retry(vd, seq)));
return 0;
}
static __maybe_unused int
__cvdso_clock_gettime_common(clockid_t clock, struct __kernel_timespec *ts)
{
const struct vdso_data *vd = __arch_get_vdso_data();
u32 msk;
/* Check for negative values or invalid clocks */
if (unlikely((u32) clock >= MAX_CLOCKS))
return -1;
/*
* Convert the clockid to a bitmask and use it to check which
* clocks are handled in the VDSO directly.
*/
msk = 1U << clock;
if (likely(msk & VDSO_HRES))
vd = &vd[CS_HRES_COARSE];
else if (msk & VDSO_COARSE)
return do_coarse(&vd[CS_HRES_COARSE], clock, ts);
else if (msk & VDSO_RAW)
vd = &vd[CS_RAW];
else
return -1;
return do_hres(vd, clock, ts);
}
static __maybe_unused int
__cvdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts)
{
int ret = __cvdso_clock_gettime_common(clock, ts);
if (unlikely(ret))
return clock_gettime_fallback(clock, ts);
return 0;
}
#ifdef BUILD_VDSO32
static __maybe_unused int
__cvdso_clock_gettime32(clockid_t clock, struct old_timespec32 *res)
{
struct __kernel_timespec ts;
int ret;
ret = __cvdso_clock_gettime_common(clock, &ts);
if (unlikely(ret))
return clock_gettime32_fallback(clock, res);
/* For ret == 0 */
res->tv_sec = ts.tv_sec;
res->tv_nsec = ts.tv_nsec;
return ret;
}
#endif /* BUILD_VDSO32 */
static __maybe_unused int
__cvdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz)
{
const struct vdso_data *vd = __arch_get_vdso_data();
if (likely(tv != NULL)) {
struct __kernel_timespec ts;
if (do_hres(&vd[CS_HRES_COARSE], CLOCK_REALTIME, &ts))
return gettimeofday_fallback(tv, tz);
tv->tv_sec = ts.tv_sec;
tv->tv_usec = (u32)ts.tv_nsec / NSEC_PER_USEC;
}
if (unlikely(tz != NULL)) {
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
if (IS_ENABLED(CONFIG_TIME_NS) &&
vd->clock_mode == VDSO_CLOCKMODE_TIMENS)
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
vd = __arch_get_timens_vdso_data();
tz->tz_minuteswest = vd[CS_HRES_COARSE].tz_minuteswest;
tz->tz_dsttime = vd[CS_HRES_COARSE].tz_dsttime;
}
return 0;
}
#ifdef VDSO_HAS_TIME
static __maybe_unused __kernel_old_time_t __cvdso_time(__kernel_old_time_t *time)
{
const struct vdso_data *vd = __arch_get_vdso_data();
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
__kernel_old_time_t t;
if (IS_ENABLED(CONFIG_TIME_NS) &&
vd->clock_mode == VDSO_CLOCKMODE_TIMENS)
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
vd = __arch_get_timens_vdso_data();
t = READ_ONCE(vd[CS_HRES_COARSE].basetime[CLOCK_REALTIME].sec);
if (time)
*time = t;
return t;
}
#endif /* VDSO_HAS_TIME */
#ifdef VDSO_HAS_CLOCK_GETRES
static __maybe_unused
int __cvdso_clock_getres_common(clockid_t clock, struct __kernel_timespec *res)
{
const struct vdso_data *vd = __arch_get_vdso_data();
u32 msk;
u64 ns;
/* Check for negative values or invalid clocks */
if (unlikely((u32) clock >= MAX_CLOCKS))
return -1;
if (IS_ENABLED(CONFIG_TIME_NS) &&
vd->clock_mode == VDSO_CLOCKMODE_TIMENS)
lib/vdso: Prepare for time namespace support To support time namespaces in the vdso with a minimal impact on regular non time namespace affected tasks, the namespace handling needs to be hidden in a slow path. The most obvious place is vdso_seq_begin(). If a task belongs to a time namespace then the VVAR page which contains the system wide vdso data is replaced with a namespace specific page which has the same layout as the VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace handling path. The extra check in the case that vdso_data->seq is odd, e.g. a concurrent update of the vdso data is in progress, is not really affecting regular tasks which are not part of a time namespace as the task is spin waiting for the update to finish and vdso_data->seq to become even again. If a time namespace task hits that code path, it invokes the corresponding time getter function which retrieves the real VVAR page, reads host time and then adds the offset for the requested clock which is stored in the special VVAR page. If VDSO time namespace support is disabled the whole magic is compiled out. Initial testing shows that the disabled case is almost identical to the host case which does not take the slow timens path. With the special timens page installed the performance hit is constant time and in the range of 5-7%. For the vdso functions which are not using the sequence count an unconditional check for vdso_data->clock_mode is added which switches to the real vdso when the clock_mode is VCLOCK_TIMENS. [avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data pointer by CS_RAW offset.] Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
2019-11-12 01:27:09 +00:00
vd = __arch_get_timens_vdso_data();
/*
* Convert the clockid to a bitmask and use it to check which
* clocks are handled in the VDSO directly.
*/
msk = 1U << clock;
if (msk & (VDSO_HRES | VDSO_RAW)) {
/*
* Preserves the behaviour of posix_get_hrtimer_res().
*/
ns = READ_ONCE(vd[CS_HRES_COARSE].hrtimer_res);
} else if (msk & VDSO_COARSE) {
/*
* Preserves the behaviour of posix_get_coarse_res().
*/
ns = LOW_RES_NSEC;
} else {
return -1;
}
if (likely(res)) {
res->tv_sec = 0;
res->tv_nsec = ns;
}
return 0;
}
static __maybe_unused
int __cvdso_clock_getres(clockid_t clock, struct __kernel_timespec *res)
{
int ret = __cvdso_clock_getres_common(clock, res);
if (unlikely(ret))
return clock_getres_fallback(clock, res);
return 0;
}
#ifdef BUILD_VDSO32
static __maybe_unused int
__cvdso_clock_getres_time32(clockid_t clock, struct old_timespec32 *res)
{
struct __kernel_timespec ts;
int ret;
ret = __cvdso_clock_getres_common(clock, &ts);
if (unlikely(ret))
return clock_getres32_fallback(clock, res);
if (likely(res)) {
res->tv_sec = ts.tv_sec;
res->tv_nsec = ts.tv_nsec;
}
return ret;
}
#endif /* BUILD_VDSO32 */
#endif /* VDSO_HAS_CLOCK_GETRES */