leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
aa776721b4
linux/drivers/net/wireless/rt2x00/rt2x00config.c

309 lines
8.8 KiB
C
Raw Normal View History

[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
/*
rt2x00: Update copyright notice Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:42:53 +00:00
Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00lib
Abstract: rt2x00 generic configuration routines.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include "rt2x00.h"
#include "rt2x00lib.h"
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
enum ieee80211_if_types type,
u8 *mac, u8 *bssid)
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
{
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
struct rt2x00intf_conf conf;
unsigned int flags = 0;
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
conf.type = type;
[PATCH] rt2x00: Move TSF sync values into rt2x00config All drivers use the same values for TSF sync, this will move the value determination into rt2x00config.c, and the definition for the values to rt2x00reg.h Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 12:14:29 +00:00
switch (type) {
case IEEE80211_IF_TYPE_IBSS:
case IEEE80211_IF_TYPE_AP:
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
conf.sync = TSF_SYNC_BEACON;
[PATCH] rt2x00: Move TSF sync values into rt2x00config All drivers use the same values for TSF sync, this will move the value determination into rt2x00config.c, and the definition for the values to rt2x00reg.h Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 12:14:29 +00:00
break;
case IEEE80211_IF_TYPE_STA:
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
conf.sync = TSF_SYNC_INFRA;
[PATCH] rt2x00: Move TSF sync values into rt2x00config All drivers use the same values for TSF sync, this will move the value determination into rt2x00config.c, and the definition for the values to rt2x00reg.h Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 12:14:29 +00:00
break;
default:
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
conf.sync = TSF_SYNC_NONE;
[PATCH] rt2x00: Move TSF sync values into rt2x00config All drivers use the same values for TSF sync, this will move the value determination into rt2x00config.c, and the definition for the values to rt2x00reg.h Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 12:14:29 +00:00
break;
}
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
/*
* Note that when NULL is passed as address we will send
* 00:00:00:00:00 to the device to clear the address.
* This will prevent the device being confused when it wants
* to ACK frames or consideres itself associated.
*/
memset(&conf.mac, 0, sizeof(conf.mac));
if (mac)
memcpy(&conf.mac, mac, ETH_ALEN);
memset(&conf.bssid, 0, sizeof(conf.bssid));
if (bssid)
memcpy(&conf.bssid, bssid, ETH_ALEN);
flags |= CONFIG_UPDATE_TYPE;
if (mac || (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count))
flags |= CONFIG_UPDATE_MAC;
if (bssid || (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count))
flags |= CONFIG_UPDATE_BSSID;
rt2x00dev->ops->lib->config_intf(rt2x00dev, intf, &conf, flags);
}
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:46:18 +00:00
void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
struct ieee80211_bss_conf *bss_conf)
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
{
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:46:18 +00:00
struct rt2x00lib_erp erp;
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
int retval;
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:46:18 +00:00
memset(&erp, 0, sizeof(erp));
erp.short_preamble = bss_conf->use_short_preamble;
erp.ack_timeout = PLCP + get_duration(ACK_SIZE, 10);
erp.ack_consume_time = SIFS + PLCP + get_duration(ACK_SIZE, 10);
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
if (rt2x00dev->hw->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME)
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:46:18 +00:00
erp.ack_timeout += SHORT_DIFS;
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
else
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:46:18 +00:00
erp.ack_timeout += DIFS;
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:46:18 +00:00
if (bss_conf->use_short_preamble) {
erp.ack_timeout += SHORT_PREAMBLE;
erp.ack_consume_time += SHORT_PREAMBLE;
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
} else {
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:46:18 +00:00
erp.ack_timeout += PREAMBLE;
erp.ack_consume_time += PREAMBLE;
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
}
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:46:18 +00:00
retval = rt2x00dev->ops->lib->config_erp(rt2x00dev, &erp);
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
if (retval) {
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:46:18 +00:00
spin_lock(&intf->lock);
intf->delayed_flags |= DELAYED_CONFIG_ERP;
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
rt2x00: Rename config_preamble() to config_erp() Rename config_preamble() to config_erp() and cleanup argument list by putting it all into a single structure. This will make the function more meaningful and easier to expand later. This second option is mostly intended to make the patch "mac80211: proper short-slot handling" from Johannes Berg easier to apply for rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:46:18 +00:00
spin_unlock(&intf->lock);
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
}
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
}
[PATCH] rt2x00: Implement SW diversity When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:36 +00:00
void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
enum antenna rx, enum antenna tx)
{
struct rt2x00lib_conf libconf;
libconf.ant.rx = rx;
libconf.ant.tx = tx;
rt2x00: Don't switch to antenna with low rssi When rssi_a > rssi_b is true and the current antenna was already antenna A, then rt2x00 incorrectly jumped to antenna B. Also don't configure the antenna when there has been no change in the antenna setup. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-25 22:15:08 +00:00
if (rx == rt2x00dev->link.ant.active.rx &&
tx == rt2x00dev->link.ant.active.tx)
return;
rt2x00: Disable RX when switching antenna Antenna switching will be ignored when RX is enabled during the switch. Make sure we disable the RX during the switch and don't forget to reenable it later. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 11:39:28 +00:00
/*
* Antenna setup changes require the RX to be disabled,
* else the changes will be ignored by the device.
*/
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00: Add link tuner safe RX toggle states This adds 2 new states which both are used to toggle the RX. These new states are required for usage inside the link tuner thread, because the normal RX toggling will stop the link tuner thread. While it is possible that the link tuner thread itself is the caller of the RX toggle (when using software antenna diversity). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-25 22:15:05 +00:00
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
rt2x00: Disable RX when switching antenna Antenna switching will be ignored when RX is enabled during the switch. Make sure we disable the RX during the switch and don't forget to reenable it later. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 11:39:28 +00:00
[PATCH] rt2x00: Implement SW diversity When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:36 +00:00
/*
* Write new antenna setup to device and reset the link tuner.
* The latter is required since we need to recalibrate the
* noise-sensitivity ratio for the new setup.
*/
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA);
[PATCH] rt2x00: Implement SW diversity When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:36 +00:00
rt2x00lib_reset_link_tuner(rt2x00dev);
rt2x00dev->link.ant.active.rx = libconf.ant.rx;
rt2x00dev->link.ant.active.tx = libconf.ant.tx;
rt2x00: Disable RX when switching antenna Antenna switching will be ignored when RX is enabled during the switch. Make sure we disable the RX during the switch and don't forget to reenable it later. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 11:39:28 +00:00
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00: Add link tuner safe RX toggle states This adds 2 new states which both are used to toggle the RX. These new states are required for usage inside the link tuner thread, because the normal RX toggling will stop the link tuner thread. While it is possible that the link tuner thread itself is the caller of the RX toggle (when using software antenna diversity). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-25 22:15:05 +00:00
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
[PATCH] rt2x00: Implement SW diversity When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:36 +00:00
}
rt2x00: Fix basic rate initialization The basic rate which is configured in the register should not match all supported rates, but only the _basic_ rates. Fix this by adding a new flag to the rt2x00_rate structure and whenever the mode is changed, loop over all available rates for that band to get the basic rate mask. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:48:08 +00:00
static u32 rt2x00lib_get_basic_rates(struct ieee80211_supported_band *band)
{
const struct rt2x00_rate *rate;
unsigned int i;
u32 mask = 0;
for (i = 0; i < band->n_bitrates; i++) {
rate = rt2x00_get_rate(band->bitrates[i].hw_value);
if (rate->flags & DEV_RATE_BASIC)
mask |= rate->ratemask;
}
return mask;
}
[PATCH] rt2x00: Reorganize rt2x00dev->flags The rt2x00dev->flags has become a chaos over time, this will reorganize the flags by renaming, deleting, adding and properly implement the flags. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-25 18:55:39 +00:00
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf, const int force_config)
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
{
[PATCH] rt2x00: Reorganize configuration handler Reorganize configuration handling by creating a extra structure which contains precalculated values based on the mac80211 values which are usefull for all individual drivers. This also fixes the preamble configuration problem, up untill now preamble was never configured since by default the rate->val value was used when changing the mode. Now rate->val will only be used to set the basic rate mask. The preamble configuration will now be done correctly through the erp_ie_changed callback function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 11:34:52 +00:00
struct rt2x00lib_conf libconf;
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 18:38:38 +00:00
struct ieee80211_supported_band *band;
[PATCH] rt2x00: Correctly translate mac80211 antenna setup to rt2x00 mac80211 has 3 values for the antenna setup: 0 - default 1 - use antenna 1 2 - use antenna 2 This means that rt2x00 should store the default value from the EEPROM somwhere and use that when mac80211 indicates that the antenna setup is 0. This also implies that rt2x00 should no longer write the hw->config.antenna_sel_* values based on the EEPROM input. This also adds the basis in rt2x00lib for correct software diversity handling. By default rt2x00lib will now configure antenna B instead of hardware diversity. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:23 +00:00
struct antenna_setup *default_ant = &rt2x00dev->default_ant;
[PATCH] rt2x00: Implement SW diversity When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:36 +00:00
struct antenna_setup *active_ant = &rt2x00dev->link.ant.active;
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
int flags = 0;
[PATCH] rt2x00: Reorganize configuration handler Reorganize configuration handling by creating a extra structure which contains precalculated values based on the mac80211 values which are usefull for all individual drivers. This also fixes the preamble configuration problem, up untill now preamble was never configured since by default the rate->val value was used when changing the mode. Now rate->val will only be used to set the basic rate mask. The preamble configuration will now be done correctly through the erp_ie_changed callback function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 11:34:52 +00:00
int short_slot_time;
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
/*
[PATCH] rt2x00: Reorganize rt2x00dev->flags The rt2x00dev->flags has become a chaos over time, this will reorganize the flags by renaming, deleting, adding and properly implement the flags. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-25 18:55:39 +00:00
* In some situations we want to force all configurations
* to be reloaded (When resuming for instance).
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
*/
[PATCH] rt2x00: Reorganize rt2x00dev->flags The rt2x00dev->flags has become a chaos over time, this will reorganize the flags by renaming, deleting, adding and properly implement the flags. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-25 18:55:39 +00:00
if (force_config) {
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
flags = CONFIG_UPDATE_ALL;
goto config;
}
/*
* Check which configuration options have been
* updated and should be send to the device.
*/
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 18:38:38 +00:00
if (rt2x00dev->rx_status.band != conf->channel->band)
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
flags |= CONFIG_UPDATE_PHYMODE;
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 18:38:38 +00:00
if (rt2x00dev->rx_status.freq != conf->channel->center_freq)
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
flags |= CONFIG_UPDATE_CHANNEL;
if (rt2x00dev->tx_power != conf->power_level)
flags |= CONFIG_UPDATE_TXPOWER;
[PATCH] rt2x00: Correctly translate mac80211 antenna setup to rt2x00 mac80211 has 3 values for the antenna setup: 0 - default 1 - use antenna 1 2 - use antenna 2 This means that rt2x00 should store the default value from the EEPROM somwhere and use that when mac80211 indicates that the antenna setup is 0. This also implies that rt2x00 should no longer write the hw->config.antenna_sel_* values based on the EEPROM input. This also adds the basis in rt2x00lib for correct software diversity handling. By default rt2x00lib will now configure antenna B instead of hardware diversity. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:23 +00:00
/*
* Determining changes in the antenna setups request several checks:
* antenna_sel_{r,t}x = 0
* -> Does active_{r,t}x match default_{r,t}x
* -> Is default_{r,t}x SW_DIVERSITY
* antenna_sel_{r,t}x = 1/2
* -> Does active_{r,t}x match antenna_sel_{r,t}x
* The reason for not updating the antenna while SW diversity
* should be used is simple: Software diversity means that
* we should switch between the antenna's based on the
* quality. This means that the current antenna is good enough
* to work with untill the link tuner decides that an antenna
* switch should be performed.
*/
if (!conf->antenna_sel_rx &&
default_ant->rx != ANTENNA_SW_DIVERSITY &&
default_ant->rx != active_ant->rx)
flags |= CONFIG_UPDATE_ANTENNA;
else if (conf->antenna_sel_rx &&
conf->antenna_sel_rx != active_ant->rx)
flags |= CONFIG_UPDATE_ANTENNA;
[PATCH] rt2x00: Fix antenna selection. In the config() handler, make sure that we do configure an antenna if the current active antenna is uninitialized. Furthermore, don't overwrite the active antenna with bogus values if we didn't touch the antenna setup. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:57 +00:00
else if (active_ant->rx == ANTENNA_SW_DIVERSITY)
flags |= CONFIG_UPDATE_ANTENNA;
[PATCH] rt2x00: Correctly translate mac80211 antenna setup to rt2x00 mac80211 has 3 values for the antenna setup: 0 - default 1 - use antenna 1 2 - use antenna 2 This means that rt2x00 should store the default value from the EEPROM somwhere and use that when mac80211 indicates that the antenna setup is 0. This also implies that rt2x00 should no longer write the hw->config.antenna_sel_* values based on the EEPROM input. This also adds the basis in rt2x00lib for correct software diversity handling. By default rt2x00lib will now configure antenna B instead of hardware diversity. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:23 +00:00
if (!conf->antenna_sel_tx &&
default_ant->tx != ANTENNA_SW_DIVERSITY &&
default_ant->tx != active_ant->tx)
flags |= CONFIG_UPDATE_ANTENNA;
else if (conf->antenna_sel_tx &&
conf->antenna_sel_tx != active_ant->tx)
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
flags |= CONFIG_UPDATE_ANTENNA;
[PATCH] rt2x00: Fix antenna selection. In the config() handler, make sure that we do configure an antenna if the current active antenna is uninitialized. Furthermore, don't overwrite the active antenna with bogus values if we didn't touch the antenna setup. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:57 +00:00
else if (active_ant->tx == ANTENNA_SW_DIVERSITY)
flags |= CONFIG_UPDATE_ANTENNA;
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
/*
* The following configuration options are never
* stored anywhere and will always be updated.
*/
flags |= CONFIG_UPDATE_SLOT_TIME;
flags |= CONFIG_UPDATE_BEACON_INT;
[PATCH] rt2x00: Reorganize configuration handler Reorganize configuration handling by creating a extra structure which contains precalculated values based on the mac80211 values which are usefull for all individual drivers. This also fixes the preamble configuration problem, up untill now preamble was never configured since by default the rate->val value was used when changing the mode. Now rate->val will only be used to set the basic rate mask. The preamble configuration will now be done correctly through the erp_ie_changed callback function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 11:34:52 +00:00
/*
* We have determined what options should be updated,
* now precalculate device configuration values depending
* on what configuration options need to be updated.
*/
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
config:
[PATCH] rt2x00: Reorganize configuration handler Reorganize configuration handling by creating a extra structure which contains precalculated values based on the mac80211 values which are usefull for all individual drivers. This also fixes the preamble configuration problem, up untill now preamble was never configured since by default the rate->val value was used when changing the mode. Now rate->val will only be used to set the basic rate mask. The preamble configuration will now be done correctly through the erp_ie_changed callback function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 11:34:52 +00:00
memset(&libconf, 0, sizeof(libconf));
if (flags & CONFIG_UPDATE_PHYMODE) {
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 18:38:38 +00:00
band = &rt2x00dev->bands[conf->channel->band];
rt2x00: Remove HWMODE_{A,B,G} rt2500usb initialized the SIFS and EIFS without using the values coming from rt2x000lib. After this is fixed HWMODE_{A,B,G} is now unused and can be removed in favour of the ieee80211_band enumeration which could still be usefull later. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:51:13 +00:00
libconf.band = conf->channel->band;
rt2x00: Fix basic rate initialization The basic rate which is configured in the register should not match all supported rates, but only the _basic_ rates. Fix this by adding a new flag to the rt2x00_rate structure and whenever the mode is changed, loop over all available rates for that band to get the basic rate mask. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-09 21:48:08 +00:00
libconf.basic_rates = rt2x00lib_get_basic_rates(band);
[PATCH] rt2x00: Reorganize configuration handler Reorganize configuration handling by creating a extra structure which contains precalculated values based on the mac80211 values which are usefull for all individual drivers. This also fixes the preamble configuration problem, up untill now preamble was never configured since by default the rate->val value was used when changing the mode. Now rate->val will only be used to set the basic rate mask. The preamble configuration will now be done correctly through the erp_ie_changed callback function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 11:34:52 +00:00
}
if (flags & CONFIG_UPDATE_CHANNEL) {
memcpy(&libconf.rf,
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 18:38:38 +00:00
&rt2x00dev->spec.channels[conf->channel->hw_value],
[PATCH] rt2x00: Reorganize configuration handler Reorganize configuration handling by creating a extra structure which contains precalculated values based on the mac80211 values which are usefull for all individual drivers. This also fixes the preamble configuration problem, up untill now preamble was never configured since by default the rate->val value was used when changing the mode. Now rate->val will only be used to set the basic rate mask. The preamble configuration will now be done correctly through the erp_ie_changed callback function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 11:34:52 +00:00
sizeof(libconf.rf));
}
[PATCH] rt2x00: Correctly translate mac80211 antenna setup to rt2x00 mac80211 has 3 values for the antenna setup: 0 - default 1 - use antenna 1 2 - use antenna 2 This means that rt2x00 should store the default value from the EEPROM somwhere and use that when mac80211 indicates that the antenna setup is 0. This also implies that rt2x00 should no longer write the hw->config.antenna_sel_* values based on the EEPROM input. This also adds the basis in rt2x00lib for correct software diversity handling. By default rt2x00lib will now configure antenna B instead of hardware diversity. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:23 +00:00
if (flags & CONFIG_UPDATE_ANTENNA) {
if (conf->antenna_sel_rx)
libconf.ant.rx = conf->antenna_sel_rx;
else if (default_ant->rx != ANTENNA_SW_DIVERSITY)
libconf.ant.rx = default_ant->rx;
else if (active_ant->rx == ANTENNA_SW_DIVERSITY)
libconf.ant.rx = ANTENNA_B;
if (conf->antenna_sel_tx)
libconf.ant.tx = conf->antenna_sel_tx;
else if (default_ant->tx != ANTENNA_SW_DIVERSITY)
libconf.ant.tx = default_ant->tx;
else if (active_ant->tx == ANTENNA_SW_DIVERSITY)
libconf.ant.tx = ANTENNA_B;
}
[PATCH] rt2x00: Reorganize configuration handler Reorganize configuration handling by creating a extra structure which contains precalculated values based on the mac80211 values which are usefull for all individual drivers. This also fixes the preamble configuration problem, up untill now preamble was never configured since by default the rate->val value was used when changing the mode. Now rate->val will only be used to set the basic rate mask. The preamble configuration will now be done correctly through the erp_ie_changed callback function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-06 11:34:52 +00:00
if (flags & CONFIG_UPDATE_SLOT_TIME) {
short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
libconf.slot_time =
short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME;
libconf.sifs = SIFS;
libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS;
libconf.difs = short_slot_time ? SHORT_DIFS : DIFS;
libconf.eifs = EIFS;
}
libconf.conf = conf;
/*
* Start configuration.
*/
rt2x00: Add per-interface structure Rework the interface handling. Delete the interface structure and replace it with a per-interface structure. This changes the way rt2x00 handles the active interface drastically. Copy ieee80211_bss_conf to the this rt2x00_intf structure during the bss_info_changed() callback function. This will allow us to reference it later, and removes the requirement for the device flag SHORT_PREAMBLE flag which is interface specific. Drivers receive the option to give the maximum number of virtual interfaces the device can handle. Virtual interface support: rt2400pci: 1 sta or 1 ap, * monitor interfaces rt2500pci: 1 sta or 1 ap, * monitor interfaces rt2500usb: 1 sta or 1 ap, * monitor interfaces rt61pci: 1 sta or 4 ap, * monitor interfaces rt73usb: 1 sta or 4 ap, * monitor interfaces At the moment none of the drivers support AP and STA interfaces simultaneously, this is a hardware limitation so future support will be very unlikely. Each interface structure receives its dedicated beacon entry, with this we can easily work with beaconing while multiple master mode interfaces are currently active. The configuration handlers for the MAC, BSSID and type are often called together since they all belong to the interface configuration. Merge the 3 configuration calls and cleanup the API between rt2x00lib and the drivers. While we are cleaning up the interface configuration anyway, we might as well clean up the configuration handler as well. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-03 14:49:59 +00:00
rt2x00dev->ops->lib->config(rt2x00dev, &libconf, flags);
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
/*
* Some configuration changes affect the link quality
* which means we need to reset the link tuner.
*/
if (flags & (CONFIG_UPDATE_CHANNEL | CONFIG_UPDATE_ANTENNA))
rt2x00lib_reset_link_tuner(rt2x00dev);
[PATCH] rt2x00: Fix antenna selection. In the config() handler, make sure that we do configure an antenna if the current active antenna is uninitialized. Furthermore, don't overwrite the active antenna with bogus values if we didn't touch the antenna setup. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:57 +00:00
if (flags & CONFIG_UPDATE_PHYMODE) {
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 18:38:38 +00:00
rt2x00dev->curr_band = conf->channel->band;
rt2x00dev->rx_status.band = conf->channel->band;
[PATCH] rt2x00: Fix antenna selection. In the config() handler, make sure that we do configure an antenna if the current active antenna is uninitialized. Furthermore, don't overwrite the active antenna with bogus values if we didn't touch the antenna setup. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:57 +00:00
}
cfg80211 API for channels/bitrates, mac80211 and driver conversion This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-24 18:38:38 +00:00
rt2x00dev->rx_status.freq = conf->channel->center_freq;
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
rt2x00dev->tx_power = conf->power_level;
[PATCH] rt2x00: Fix antenna selection. In the config() handler, make sure that we do configure an antenna if the current active antenna is uninitialized. Furthermore, don't overwrite the active antenna with bogus values if we didn't touch the antenna setup. Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 14:26:57 +00:00
if (flags & CONFIG_UPDATE_ANTENNA) {
rt2x00dev->link.ant.active.rx = libconf.ant.rx;
rt2x00dev->link.ant.active.tx = libconf.ant.tx;
}
[RT2x00]: add driver for Ralink wireless hardware Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-26 00:57:13 +00:00
}
Reference in New Issue Copy Permalink