2015-08-14 20:33:37 +00:00
|
|
|
/*
|
|
|
|
* SPI Link Layer for ST NCI based Driver
|
|
|
|
* Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms and conditions of the GNU General Public License,
|
|
|
|
* version 2, as published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/spi/spi.h>
|
nfc: st-nci: Add support for acpi probing for spi device.
Add support for acpi probing.
SMO2101 is used for st21nfcb
It has been tested with the following acpi node on Minnowboard:
Note: Remove uicc-present or ese-present Package if one of them is not
supported.
Device (NFC1)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "SMO2101") // _HID: Hardware ID
Name (_CID, "SMO2101") // _CID: Compatible ID
Name (_DDN, "SMO NFC") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Name (_DSD, Package (0x02)
{
/* Device Properties for _DSD */
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x02)
{
Package (0x02) { "uicc-present", 1 },
Package (0x02) { "ese-present", 1 }
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
SpiSerialBus (0, PolarityLow, FourWireMode, 8,
ControllerInitiated, 4000000, ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI1",
0x00, ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0001
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0002,
}
})
Return (SBUF) /* \_SB_.SPI1.NFC1._CRS.SBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-23 22:45:10 +00:00
|
|
|
#include <linux/gpio/consumer.h>
|
|
|
|
#include <linux/acpi.h>
|
2015-08-14 20:33:37 +00:00
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/nfc.h>
|
2017-06-19 10:08:54 +00:00
|
|
|
#include <linux/of.h>
|
2015-10-25 21:54:19 +00:00
|
|
|
#include <net/nfc/nci.h>
|
2015-08-14 20:33:37 +00:00
|
|
|
|
2015-10-25 21:54:17 +00:00
|
|
|
#include "st-nci.h"
|
2015-08-14 20:33:37 +00:00
|
|
|
|
|
|
|
#define DRIVER_DESC "NCI NFC driver for ST_NCI"
|
|
|
|
|
|
|
|
/* ndlc header */
|
|
|
|
#define ST_NCI_FRAME_HEADROOM 1
|
2015-12-23 22:45:12 +00:00
|
|
|
#define ST_NCI_FRAME_TAILROOM 0
|
2015-08-14 20:33:37 +00:00
|
|
|
|
|
|
|
#define ST_NCI_SPI_MIN_SIZE 4 /* PCB(1) + NCI Packet header(3) */
|
|
|
|
#define ST_NCI_SPI_MAX_SIZE 250 /* req 4.2.1 */
|
|
|
|
|
2017-06-19 10:08:52 +00:00
|
|
|
#define ST_NCI_DRIVER_NAME "st_nci"
|
2015-08-14 20:33:37 +00:00
|
|
|
#define ST_NCI_SPI_DRIVER_NAME "st_nci_spi"
|
|
|
|
|
nfc: st-nci: spi: Change ST_NCI_GPIO_NAME_RESET to match DT
Since
commit 10cf4899f8af ("gpiolib: tighten up ACPI legacy gpio lookups")
If _DSD properties are available in an ACPI node, we are not
allowed to fallback to _CRS data to retrieve gpio properties.
This was causing us to fail if uicc-present and/or ese-present
are defined.
To be consistent with devicetree change ST_NCI_GPIO_NAME_RESET
content to reset so that acpi_find_gpio in drivers/gpio/gpiolib.c
will look for reset-gpios. In the mean time the ACPI table needs
to be fixed as follow (Tested on Minnowboard Max):
Device (NFC1)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "SMO2101") // _HID: Hardware ID
Name (_CID, "SMO2101") // _CID: Compatible ID
Name (_DDN, "SMO NFC") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
SpiSerialBus (0, PolarityLow, FourWireMode, 8,
ControllerInitiated, 4000000, ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI1",
0x00, ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0001
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0002,
}
})
Name (_DSD, Package (0x02)
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x03)
{
Package (0x02) { "uicc-present", 1 },
Package (0x02) { "ese-present", 1 },
Package (0x02) { "reset-gpios", Package(0x04) { ^NFC1, 1, 0, 0} },
}
})
Return (SBUF) /* \_SB_.SPI1.NFC1._CRS.SBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-04-30 07:12:36 +00:00
|
|
|
#define ST_NCI_GPIO_NAME_RESET "reset"
|
2015-12-23 22:45:07 +00:00
|
|
|
|
2015-08-14 20:33:37 +00:00
|
|
|
struct st_nci_spi_phy {
|
|
|
|
struct spi_device *spi_dev;
|
|
|
|
struct llt_ndlc *ndlc;
|
|
|
|
|
2015-10-25 21:54:48 +00:00
|
|
|
bool irq_active;
|
|
|
|
|
2017-06-19 10:08:54 +00:00
|
|
|
struct gpio_desc *gpiod_reset;
|
2015-10-25 21:54:39 +00:00
|
|
|
|
|
|
|
struct st_nci_se_status se_status;
|
2015-08-14 20:33:37 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static int st_nci_spi_enable(void *phy_id)
|
|
|
|
{
|
|
|
|
struct st_nci_spi_phy *phy = phy_id;
|
|
|
|
|
2017-06-19 10:08:54 +00:00
|
|
|
gpiod_set_value(phy->gpiod_reset, 0);
|
2015-08-14 20:33:37 +00:00
|
|
|
usleep_range(10000, 15000);
|
2017-06-19 10:08:54 +00:00
|
|
|
gpiod_set_value(phy->gpiod_reset, 1);
|
2015-08-14 20:33:37 +00:00
|
|
|
usleep_range(80000, 85000);
|
|
|
|
|
2015-10-25 21:54:48 +00:00
|
|
|
if (phy->ndlc->powered == 0 && phy->irq_active == 0) {
|
2015-08-14 20:33:37 +00:00
|
|
|
enable_irq(phy->spi_dev->irq);
|
2015-10-25 21:54:48 +00:00
|
|
|
phy->irq_active = true;
|
|
|
|
}
|
2015-08-14 20:33:37 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void st_nci_spi_disable(void *phy_id)
|
|
|
|
{
|
|
|
|
struct st_nci_spi_phy *phy = phy_id;
|
|
|
|
|
|
|
|
disable_irq_nosync(phy->spi_dev->irq);
|
2015-10-25 21:54:48 +00:00
|
|
|
phy->irq_active = false;
|
2015-08-14 20:33:37 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Writing a frame must not return the number of written bytes.
|
|
|
|
* It must return either zero for success, or <0 for error.
|
|
|
|
* In addition, it must not alter the skb
|
|
|
|
*/
|
|
|
|
static int st_nci_spi_write(void *phy_id, struct sk_buff *skb)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
struct st_nci_spi_phy *phy = phy_id;
|
|
|
|
struct spi_device *dev = phy->spi_dev;
|
|
|
|
struct sk_buff *skb_rx;
|
2015-10-25 21:54:19 +00:00
|
|
|
u8 buf[ST_NCI_SPI_MAX_SIZE + NCI_DATA_HDR_SIZE +
|
|
|
|
ST_NCI_FRAME_HEADROOM + ST_NCI_FRAME_TAILROOM];
|
2015-08-14 20:33:37 +00:00
|
|
|
struct spi_transfer spi_xfer = {
|
|
|
|
.tx_buf = skb->data,
|
|
|
|
.rx_buf = buf,
|
|
|
|
.len = skb->len,
|
|
|
|
};
|
|
|
|
|
|
|
|
if (phy->ndlc->hard_fault != 0)
|
|
|
|
return phy->ndlc->hard_fault;
|
|
|
|
|
|
|
|
r = spi_sync_transfer(dev, &spi_xfer, 1);
|
|
|
|
/*
|
|
|
|
* We may have received some valuable data on miso line.
|
|
|
|
* Send them back in the ndlc state machine.
|
|
|
|
*/
|
|
|
|
if (!r) {
|
|
|
|
skb_rx = alloc_skb(skb->len, GFP_KERNEL);
|
|
|
|
if (!skb_rx) {
|
|
|
|
r = -ENOMEM;
|
|
|
|
goto exit;
|
|
|
|
}
|
|
|
|
|
|
|
|
skb_put(skb_rx, skb->len);
|
|
|
|
memcpy(skb_rx->data, buf, skb->len);
|
|
|
|
ndlc_recv(phy->ndlc, skb_rx);
|
|
|
|
}
|
|
|
|
|
|
|
|
exit:
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Reads an ndlc frame and returns it in a newly allocated sk_buff.
|
|
|
|
* returns:
|
|
|
|
* 0 : if received frame is complete
|
|
|
|
* -EREMOTEIO : i2c read error (fatal)
|
|
|
|
* -EBADMSG : frame was incorrect and discarded
|
|
|
|
* -ENOMEM : cannot allocate skb, frame dropped
|
|
|
|
*/
|
|
|
|
static int st_nci_spi_read(struct st_nci_spi_phy *phy,
|
|
|
|
struct sk_buff **skb)
|
|
|
|
{
|
|
|
|
int r;
|
|
|
|
u8 len;
|
|
|
|
u8 buf[ST_NCI_SPI_MAX_SIZE];
|
|
|
|
struct spi_device *dev = phy->spi_dev;
|
|
|
|
struct spi_transfer spi_xfer = {
|
|
|
|
.rx_buf = buf,
|
|
|
|
.len = ST_NCI_SPI_MIN_SIZE,
|
|
|
|
};
|
|
|
|
|
|
|
|
r = spi_sync_transfer(dev, &spi_xfer, 1);
|
|
|
|
if (r < 0)
|
|
|
|
return -EREMOTEIO;
|
|
|
|
|
|
|
|
len = be16_to_cpu(*(__be16 *) (buf + 2));
|
|
|
|
if (len > ST_NCI_SPI_MAX_SIZE) {
|
|
|
|
nfc_err(&dev->dev, "invalid frame len\n");
|
|
|
|
phy->ndlc->hard_fault = 1;
|
|
|
|
return -EBADMSG;
|
|
|
|
}
|
|
|
|
|
|
|
|
*skb = alloc_skb(ST_NCI_SPI_MIN_SIZE + len, GFP_KERNEL);
|
|
|
|
if (*skb == NULL)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
skb_reserve(*skb, ST_NCI_SPI_MIN_SIZE);
|
|
|
|
skb_put(*skb, ST_NCI_SPI_MIN_SIZE);
|
|
|
|
memcpy((*skb)->data, buf, ST_NCI_SPI_MIN_SIZE);
|
|
|
|
|
|
|
|
if (!len)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
spi_xfer.len = len;
|
|
|
|
r = spi_sync_transfer(dev, &spi_xfer, 1);
|
|
|
|
if (r < 0) {
|
|
|
|
kfree_skb(*skb);
|
|
|
|
return -EREMOTEIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
skb_put(*skb, len);
|
|
|
|
memcpy((*skb)->data + ST_NCI_SPI_MIN_SIZE, buf, len);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Reads an ndlc frame from the chip.
|
|
|
|
*
|
|
|
|
* On ST21NFCB, IRQ goes in idle state when read starts.
|
|
|
|
*/
|
|
|
|
static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id)
|
|
|
|
{
|
|
|
|
struct st_nci_spi_phy *phy = phy_id;
|
|
|
|
struct spi_device *dev;
|
|
|
|
struct sk_buff *skb = NULL;
|
|
|
|
int r;
|
|
|
|
|
|
|
|
if (!phy || !phy->ndlc || irq != phy->spi_dev->irq) {
|
|
|
|
WARN_ON_ONCE(1);
|
|
|
|
return IRQ_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev = phy->spi_dev;
|
|
|
|
dev_dbg(&dev->dev, "IRQ\n");
|
|
|
|
|
|
|
|
if (phy->ndlc->hard_fault)
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
|
|
|
|
if (!phy->ndlc->powered) {
|
|
|
|
st_nci_spi_disable(phy);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = st_nci_spi_read(phy, &skb);
|
|
|
|
if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
|
|
|
|
ndlc_recv(phy->ndlc, skb);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct nfc_phy_ops spi_phy_ops = {
|
|
|
|
.write = st_nci_spi_write,
|
|
|
|
.enable = st_nci_spi_enable,
|
|
|
|
.disable = st_nci_spi_disable,
|
|
|
|
};
|
|
|
|
|
nfc: st-nci: Add support for acpi probing for spi device.
Add support for acpi probing.
SMO2101 is used for st21nfcb
It has been tested with the following acpi node on Minnowboard:
Note: Remove uicc-present or ese-present Package if one of them is not
supported.
Device (NFC1)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "SMO2101") // _HID: Hardware ID
Name (_CID, "SMO2101") // _CID: Compatible ID
Name (_DDN, "SMO NFC") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Name (_DSD, Package (0x02)
{
/* Device Properties for _DSD */
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x02)
{
Package (0x02) { "uicc-present", 1 },
Package (0x02) { "ese-present", 1 }
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
SpiSerialBus (0, PolarityLow, FourWireMode, 8,
ControllerInitiated, 4000000, ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI1",
0x00, ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0001
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0002,
}
})
Return (SBUF) /* \_SB_.SPI1.NFC1._CRS.SBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-23 22:45:10 +00:00
|
|
|
static int st_nci_spi_acpi_request_resources(struct spi_device *spi_dev)
|
|
|
|
{
|
|
|
|
struct st_nci_spi_phy *phy = spi_get_drvdata(spi_dev);
|
2016-04-30 07:12:46 +00:00
|
|
|
struct device *dev = &spi_dev->dev;
|
2016-04-30 07:12:39 +00:00
|
|
|
u8 tmp;
|
nfc: st-nci: Add support for acpi probing for spi device.
Add support for acpi probing.
SMO2101 is used for st21nfcb
It has been tested with the following acpi node on Minnowboard:
Note: Remove uicc-present or ese-present Package if one of them is not
supported.
Device (NFC1)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "SMO2101") // _HID: Hardware ID
Name (_CID, "SMO2101") // _CID: Compatible ID
Name (_DDN, "SMO NFC") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Name (_DSD, Package (0x02)
{
/* Device Properties for _DSD */
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x02)
{
Package (0x02) { "uicc-present", 1 },
Package (0x02) { "ese-present", 1 }
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
SpiSerialBus (0, PolarityLow, FourWireMode, 8,
ControllerInitiated, 4000000, ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI1",
0x00, ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0001
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0002,
}
})
Return (SBUF) /* \_SB_.SPI1.NFC1._CRS.SBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-23 22:45:10 +00:00
|
|
|
|
|
|
|
/* Get RESET GPIO from ACPI */
|
2017-06-19 10:08:54 +00:00
|
|
|
phy->gpiod_reset = devm_gpiod_get_index(dev, ST_NCI_GPIO_NAME_RESET,
|
|
|
|
1, GPIOD_OUT_HIGH);
|
|
|
|
if (IS_ERR(phy->gpiod_reset)) {
|
nfc: st-nci: Add support for acpi probing for spi device.
Add support for acpi probing.
SMO2101 is used for st21nfcb
It has been tested with the following acpi node on Minnowboard:
Note: Remove uicc-present or ese-present Package if one of them is not
supported.
Device (NFC1)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "SMO2101") // _HID: Hardware ID
Name (_CID, "SMO2101") // _CID: Compatible ID
Name (_DDN, "SMO NFC") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Name (_DSD, Package (0x02)
{
/* Device Properties for _DSD */
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x02)
{
Package (0x02) { "uicc-present", 1 },
Package (0x02) { "ese-present", 1 }
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
SpiSerialBus (0, PolarityLow, FourWireMode, 8,
ControllerInitiated, 4000000, ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI1",
0x00, ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0001
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0002,
}
})
Return (SBUF) /* \_SB_.SPI1.NFC1._CRS.SBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-23 22:45:10 +00:00
|
|
|
nfc_err(dev, "Unable to get RESET GPIO\n");
|
2017-06-19 10:08:54 +00:00
|
|
|
return PTR_ERR(phy->gpiod_reset);
|
nfc: st-nci: Add support for acpi probing for spi device.
Add support for acpi probing.
SMO2101 is used for st21nfcb
It has been tested with the following acpi node on Minnowboard:
Note: Remove uicc-present or ese-present Package if one of them is not
supported.
Device (NFC1)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "SMO2101") // _HID: Hardware ID
Name (_CID, "SMO2101") // _CID: Compatible ID
Name (_DDN, "SMO NFC") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Name (_DSD, Package (0x02)
{
/* Device Properties for _DSD */
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x02)
{
Package (0x02) { "uicc-present", 1 },
Package (0x02) { "ese-present", 1 }
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
SpiSerialBus (0, PolarityLow, FourWireMode, 8,
ControllerInitiated, 4000000, ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI1",
0x00, ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0001
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0002,
}
})
Return (SBUF) /* \_SB_.SPI1.NFC1._CRS.SBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-23 22:45:10 +00:00
|
|
|
}
|
|
|
|
|
2016-04-30 07:12:39 +00:00
|
|
|
phy->se_status.is_ese_present = false;
|
|
|
|
phy->se_status.is_uicc_present = false;
|
|
|
|
|
|
|
|
if (device_property_present(dev, "ese-present")) {
|
|
|
|
device_property_read_u8(dev, "ese-present", &tmp);
|
|
|
|
tmp = phy->se_status.is_ese_present;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (device_property_present(dev, "uicc-present")) {
|
|
|
|
device_property_read_u8(dev, "uicc-present", &tmp);
|
|
|
|
tmp = phy->se_status.is_uicc_present;
|
|
|
|
}
|
nfc: st-nci: Add support for acpi probing for spi device.
Add support for acpi probing.
SMO2101 is used for st21nfcb
It has been tested with the following acpi node on Minnowboard:
Note: Remove uicc-present or ese-present Package if one of them is not
supported.
Device (NFC1)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "SMO2101") // _HID: Hardware ID
Name (_CID, "SMO2101") // _CID: Compatible ID
Name (_DDN, "SMO NFC") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Name (_DSD, Package (0x02)
{
/* Device Properties for _DSD */
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x02)
{
Package (0x02) { "uicc-present", 1 },
Package (0x02) { "ese-present", 1 }
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
SpiSerialBus (0, PolarityLow, FourWireMode, 8,
ControllerInitiated, 4000000, ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI1",
0x00, ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0001
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0002,
}
})
Return (SBUF) /* \_SB_.SPI1.NFC1._CRS.SBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-23 22:45:10 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-06-19 10:08:54 +00:00
|
|
|
static int st_nci_spi_of_request_resources(struct spi_device *spi)
|
2015-08-14 20:33:37 +00:00
|
|
|
{
|
2017-06-19 10:08:54 +00:00
|
|
|
struct st_nci_spi_phy *phy = spi_get_drvdata(spi);
|
|
|
|
struct device *dev = &spi->dev;
|
2015-08-14 20:33:37 +00:00
|
|
|
struct device_node *pp;
|
|
|
|
|
2017-06-19 10:08:54 +00:00
|
|
|
pp = spi->dev.of_node;
|
2015-08-14 20:33:37 +00:00
|
|
|
if (!pp)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
/* Get GPIO from device tree */
|
2017-06-19 10:08:54 +00:00
|
|
|
phy->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
|
|
if (IS_ERR(phy->gpiod_reset)) {
|
|
|
|
nfc_err(dev, "Unable to get RESET GPIO\n");
|
|
|
|
return PTR_ERR(phy->gpiod_reset);
|
2015-08-14 20:33:37 +00:00
|
|
|
}
|
|
|
|
|
2015-10-25 21:54:39 +00:00
|
|
|
phy->se_status.is_ese_present =
|
|
|
|
of_property_read_bool(pp, "ese-present");
|
|
|
|
phy->se_status.is_uicc_present =
|
|
|
|
of_property_read_bool(pp, "uicc-present");
|
|
|
|
|
2015-08-14 20:33:37 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int st_nci_spi_probe(struct spi_device *dev)
|
|
|
|
{
|
|
|
|
struct st_nci_spi_phy *phy;
|
|
|
|
int r;
|
|
|
|
|
|
|
|
dev_dbg(&dev->dev, "%s\n", __func__);
|
|
|
|
dev_dbg(&dev->dev, "IRQ: %d\n", dev->irq);
|
|
|
|
|
|
|
|
/* Check SPI platform functionnalities */
|
|
|
|
if (!dev) {
|
|
|
|
pr_debug("%s: dev is NULL. Device is not accessible.\n",
|
|
|
|
__func__);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
phy = devm_kzalloc(&dev->dev, sizeof(struct st_nci_spi_phy),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!phy)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
phy->spi_dev = dev;
|
|
|
|
|
|
|
|
spi_set_drvdata(dev, phy);
|
|
|
|
|
2017-06-19 10:08:52 +00:00
|
|
|
if (dev->dev.of_node) {
|
2015-08-14 20:33:37 +00:00
|
|
|
r = st_nci_spi_of_request_resources(dev);
|
|
|
|
if (r) {
|
|
|
|
nfc_err(&dev->dev, "No platform data\n");
|
|
|
|
return r;
|
|
|
|
}
|
nfc: st-nci: Add support for acpi probing for spi device.
Add support for acpi probing.
SMO2101 is used for st21nfcb
It has been tested with the following acpi node on Minnowboard:
Note: Remove uicc-present or ese-present Package if one of them is not
supported.
Device (NFC1)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "SMO2101") // _HID: Hardware ID
Name (_CID, "SMO2101") // _CID: Compatible ID
Name (_DDN, "SMO NFC") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Name (_DSD, Package (0x02)
{
/* Device Properties for _DSD */
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x02)
{
Package (0x02) { "uicc-present", 1 },
Package (0x02) { "ese-present", 1 }
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
SpiSerialBus (0, PolarityLow, FourWireMode, 8,
ControllerInitiated, 4000000, ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI1",
0x00, ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0001
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0002,
}
})
Return (SBUF) /* \_SB_.SPI1.NFC1._CRS.SBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-23 22:45:10 +00:00
|
|
|
} else if (ACPI_HANDLE(&dev->dev)) {
|
|
|
|
r = st_nci_spi_acpi_request_resources(dev);
|
|
|
|
if (r) {
|
|
|
|
nfc_err(&dev->dev, "Cannot get ACPI data\n");
|
|
|
|
return r;
|
|
|
|
}
|
2015-08-14 20:33:37 +00:00
|
|
|
} else {
|
|
|
|
nfc_err(&dev->dev,
|
|
|
|
"st_nci platform resources not available\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = ndlc_probe(phy, &spi_phy_ops, &dev->dev,
|
|
|
|
ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM,
|
2015-10-25 21:54:39 +00:00
|
|
|
&phy->ndlc, &phy->se_status);
|
2015-08-14 20:33:37 +00:00
|
|
|
if (r < 0) {
|
|
|
|
nfc_err(&dev->dev, "Unable to register ndlc layer\n");
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
2015-10-25 21:54:48 +00:00
|
|
|
phy->irq_active = true;
|
2015-08-14 20:33:37 +00:00
|
|
|
r = devm_request_threaded_irq(&dev->dev, dev->irq, NULL,
|
|
|
|
st_nci_irq_thread_fn,
|
2017-06-19 10:08:53 +00:00
|
|
|
IRQF_ONESHOT,
|
2015-08-14 20:33:37 +00:00
|
|
|
ST_NCI_SPI_DRIVER_NAME, phy);
|
|
|
|
if (r < 0)
|
|
|
|
nfc_err(&dev->dev, "Unable to register IRQ handler\n");
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int st_nci_spi_remove(struct spi_device *dev)
|
|
|
|
{
|
|
|
|
struct st_nci_spi_phy *phy = spi_get_drvdata(dev);
|
|
|
|
|
|
|
|
dev_dbg(&dev->dev, "%s\n", __func__);
|
|
|
|
|
|
|
|
ndlc_remove(phy->ndlc);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-12-23 22:45:05 +00:00
|
|
|
static struct spi_device_id st_nci_spi_id_table[] = {
|
|
|
|
{ST_NCI_SPI_DRIVER_NAME, 0},
|
|
|
|
{}
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table);
|
|
|
|
|
nfc: st-nci: Add support for acpi probing for spi device.
Add support for acpi probing.
SMO2101 is used for st21nfcb
It has been tested with the following acpi node on Minnowboard:
Note: Remove uicc-present or ese-present Package if one of them is not
supported.
Device (NFC1)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "SMO2101") // _HID: Hardware ID
Name (_CID, "SMO2101") // _CID: Compatible ID
Name (_DDN, "SMO NFC") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Name (_DSD, Package (0x02)
{
/* Device Properties for _DSD */
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x02)
{
Package (0x02) { "uicc-present", 1 },
Package (0x02) { "ese-present", 1 }
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
SpiSerialBus (0, PolarityLow, FourWireMode, 8,
ControllerInitiated, 4000000, ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI1",
0x00, ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0001
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0002,
}
})
Return (SBUF) /* \_SB_.SPI1.NFC1._CRS.SBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-23 22:45:10 +00:00
|
|
|
static const struct acpi_device_id st_nci_spi_acpi_match[] = {
|
|
|
|
{"SMO2101", 0},
|
|
|
|
{}
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(acpi, st_nci_spi_acpi_match);
|
|
|
|
|
2015-08-14 20:33:37 +00:00
|
|
|
static const struct of_device_id of_st_nci_spi_match[] = {
|
|
|
|
{ .compatible = "st,st21nfcb-spi", },
|
|
|
|
{}
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, of_st_nci_spi_match);
|
|
|
|
|
|
|
|
static struct spi_driver st_nci_spi_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = ST_NCI_SPI_DRIVER_NAME,
|
|
|
|
.of_match_table = of_match_ptr(of_st_nci_spi_match),
|
nfc: st-nci: Add support for acpi probing for spi device.
Add support for acpi probing.
SMO2101 is used for st21nfcb
It has been tested with the following acpi node on Minnowboard:
Note: Remove uicc-present or ese-present Package if one of them is not
supported.
Device (NFC1)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "SMO2101") // _HID: Hardware ID
Name (_CID, "SMO2101") // _CID: Compatible ID
Name (_DDN, "SMO NFC") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Name (_DSD, Package (0x02)
{
/* Device Properties for _DSD */
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x02)
{
Package (0x02) { "uicc-present", 1 },
Package (0x02) { "ese-present", 1 }
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
SpiSerialBus (0, PolarityLow, FourWireMode, 8,
ControllerInitiated, 4000000, ClockPolarityLow,
ClockPhaseFirst, "\\_SB.SPI1",
0x00, ResourceConsumer, ,)
GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0001
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPO2", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0002,
}
})
Return (SBUF) /* \_SB_.SPI1.NFC1._CRS.SBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-23 22:45:10 +00:00
|
|
|
.acpi_match_table = ACPI_PTR(st_nci_spi_acpi_match),
|
2015-08-14 20:33:37 +00:00
|
|
|
},
|
|
|
|
.probe = st_nci_spi_probe,
|
|
|
|
.id_table = st_nci_spi_id_table,
|
|
|
|
.remove = st_nci_spi_remove,
|
|
|
|
};
|
|
|
|
module_spi_driver(st_nci_spi_driver);
|
|
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|