linux/drivers/scsi/sun3_scsi.c

670 lines
16 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
*
* Sun3 DMA routines added by Sam Creasey (sammy@sammy.net)
*
* VME support added by Sam Creasey
*
* TODO: modify this driver to support multiple Sun3 SCSI VME boards
*
* Adapted from mac_scsinew.c:
*/
/*
* Generic Macintosh NCR5380 driver
*
* Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
*
* derived in part from:
*/
/*
* Generic Generic NCR5380 driver
*
* Copyright 1995, Russell King
*/
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/dvma.h>
#include <scsi/scsi_host.h>
/* minimum number of bytes to do dma on */
#define DMA_MIN_SIZE 129
/* Definitions for the core NCR5380 driver. */
#define NCR5380_implementation_fields /* none */
#define NCR5380_read(reg) in_8(hostdata->io + (reg))
#define NCR5380_write(reg, value) out_8(hostdata->io + (reg), value)
#define NCR5380_queue_command sun3scsi_queue_command
#define NCR5380_host_reset sun3scsi_host_reset
#define NCR5380_abort sun3scsi_abort
#define NCR5380_info sun3scsi_info
#define NCR5380_dma_xfer_len sun3scsi_dma_xfer_len
#define NCR5380_dma_recv_setup sun3scsi_dma_count
#define NCR5380_dma_send_setup sun3scsi_dma_count
#define NCR5380_dma_residual sun3scsi_dma_residual
#include "NCR5380.h"
/* dma regs start at regbase + 8, directly after the NCR regs */
struct sun3_dma_regs {
unsigned short dma_addr_hi; /* vme only */
unsigned short dma_addr_lo; /* vme only */
unsigned short dma_count_hi; /* vme only */
unsigned short dma_count_lo; /* vme only */
unsigned short udc_data; /* udc dma data reg (obio only) */
unsigned short udc_addr; /* uda dma addr reg (obio only) */
unsigned short fifo_data; /* fifo data reg,
* holds extra byte on odd dma reads
*/
unsigned short fifo_count;
unsigned short csr; /* control/status reg */
unsigned short bpack_hi; /* vme only */
unsigned short bpack_lo; /* vme only */
unsigned short ivect; /* vme only */
unsigned short fifo_count_hi; /* vme only */
};
/* ucd chip specific regs - live in dvma space */
struct sun3_udc_regs {
unsigned short rsel; /* select regs to load */
unsigned short addr_hi; /* high word of addr */
unsigned short addr_lo; /* low word */
unsigned short count; /* words to be xfer'd */
unsigned short mode_hi; /* high word of channel mode */
unsigned short mode_lo; /* low word of channel mode */
};
/* addresses of the udc registers */
#define UDC_MODE 0x38
#define UDC_CSR 0x2e /* command/status */
#define UDC_CHN_HI 0x26 /* chain high word */
#define UDC_CHN_LO 0x22 /* chain lo word */
#define UDC_CURA_HI 0x1a /* cur reg A high */
#define UDC_CURA_LO 0x0a /* cur reg A low */
#define UDC_CURB_HI 0x12 /* cur reg B high */
#define UDC_CURB_LO 0x02 /* cur reg B low */
#define UDC_MODE_HI 0x56 /* mode reg high */
#define UDC_MODE_LO 0x52 /* mode reg low */
#define UDC_COUNT 0x32 /* words to xfer */
/* some udc commands */
#define UDC_RESET 0
#define UDC_CHN_START 0xa0 /* start chain */
#define UDC_INT_ENABLE 0x32 /* channel 1 int on */
/* udc mode words */
#define UDC_MODE_HIWORD 0x40
#define UDC_MODE_LSEND 0xc2
#define UDC_MODE_LRECV 0xd2
/* udc reg selections */
#define UDC_RSEL_SEND 0x282
#define UDC_RSEL_RECV 0x182
/* bits in csr reg */
#define CSR_DMA_ACTIVE 0x8000
#define CSR_DMA_CONFLICT 0x4000
#define CSR_DMA_BUSERR 0x2000
#define CSR_FIFO_EMPTY 0x400 /* fifo flushed? */
#define CSR_SDB_INT 0x200 /* sbc interrupt pending */
#define CSR_DMA_INT 0x100 /* dma interrupt pending */
#define CSR_LEFT 0xc0
#define CSR_LEFT_3 0xc0
#define CSR_LEFT_2 0x80
#define CSR_LEFT_1 0x40
#define CSR_PACK_ENABLE 0x20
#define CSR_DMA_ENABLE 0x10
#define CSR_SEND 0x8 /* 1 = send 0 = recv */
#define CSR_FIFO 0x2 /* reset fifo */
#define CSR_INTR 0x4 /* interrupt enable */
#define CSR_SCSI 0x1
#define VME_DATA24 0x3d00
extern int sun3_map_test(unsigned long, char *);
static int setup_can_queue = -1;
module_param(setup_can_queue, int, 0);
static int setup_cmd_per_lun = -1;
module_param(setup_cmd_per_lun, int, 0);
static int setup_sg_tablesize = -1;
module_param(setup_sg_tablesize, int, 0);
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
/* ms to wait after hitting dma regs */
#define SUN3_DMA_DELAY 10
/* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
#define SUN3_DVMA_BUFSIZE 0xe000
static struct scsi_cmnd *sun3_dma_setup_done;
static volatile struct sun3_dma_regs *dregs;
static struct sun3_udc_regs *udc_regs;
static unsigned char *sun3_dma_orig_addr;
static unsigned long sun3_dma_orig_count;
static int sun3_dma_active;
static unsigned long last_residual;
#ifndef SUN3_SCSI_VME
/* dma controller register access functions */
static inline unsigned short sun3_udc_read(unsigned char reg)
{
unsigned short ret;
dregs->udc_addr = UDC_CSR;
udelay(SUN3_DMA_DELAY);
ret = dregs->udc_data;
udelay(SUN3_DMA_DELAY);
return ret;
}
static inline void sun3_udc_write(unsigned short val, unsigned char reg)
{
dregs->udc_addr = reg;
udelay(SUN3_DMA_DELAY);
dregs->udc_data = val;
udelay(SUN3_DMA_DELAY);
}
#endif
// safe bits for the CSR
#define CSR_GOOD 0x060f
static irqreturn_t scsi_sun3_intr(int irq, void *dev)
{
struct Scsi_Host *instance = dev;
unsigned short csr = dregs->csr;
int handled = 0;
#ifdef SUN3_SCSI_VME
dregs->csr &= ~CSR_DMA_ENABLE;
#endif
if(csr & ~CSR_GOOD) {
if (csr & CSR_DMA_BUSERR)
shost_printk(KERN_ERR, instance, "bus error in DMA\n");
if (csr & CSR_DMA_CONFLICT)
shost_printk(KERN_ERR, instance, "DMA conflict\n");
handled = 1;
}
if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
NCR5380_intr(irq, dev);
handled = 1;
}
return IRQ_RETVAL(handled);
}
/* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
static int sun3scsi_dma_setup(struct NCR5380_hostdata *hostdata,
unsigned char *data, int count, int write_flag)
{
void *addr;
if(sun3_dma_orig_addr != NULL)
dvma_unmap(sun3_dma_orig_addr);
#ifdef SUN3_SCSI_VME
addr = (void *)dvma_map_vme((unsigned long) data, count);
#else
addr = (void *)dvma_map((unsigned long) data, count);
#endif
sun3_dma_orig_addr = addr;
sun3_dma_orig_count = count;
#ifndef SUN3_SCSI_VME
dregs->fifo_count = 0;
sun3_udc_write(UDC_RESET, UDC_CSR);
/* reset fifo */
dregs->csr &= ~CSR_FIFO;
dregs->csr |= CSR_FIFO;
#endif
/* set direction */
if(write_flag)
dregs->csr |= CSR_SEND;
else
dregs->csr &= ~CSR_SEND;
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_PACK_ENABLE;
dregs->dma_addr_hi = ((unsigned long)addr >> 16);
dregs->dma_addr_lo = ((unsigned long)addr & 0xffff);
dregs->dma_count_hi = 0;
dregs->dma_count_lo = 0;
dregs->fifo_count_hi = 0;
dregs->fifo_count = 0;
#else
/* byte count for fifo */
dregs->fifo_count = count;
sun3_udc_write(UDC_RESET, UDC_CSR);
/* reset fifo */
dregs->csr &= ~CSR_FIFO;
dregs->csr |= CSR_FIFO;
if(dregs->fifo_count != count) {
shost_printk(KERN_ERR, hostdata->host,
"FIFO mismatch %04x not %04x\n",
dregs->fifo_count, (unsigned int) count);
NCR5380_dprint(NDEBUG_DMA, hostdata->host);
}
/* setup udc */
udc_regs->addr_hi = (((unsigned long)(addr) & 0xff0000) >> 8);
udc_regs->addr_lo = ((unsigned long)(addr) & 0xffff);
udc_regs->count = count/2; /* count in words */
udc_regs->mode_hi = UDC_MODE_HIWORD;
if(write_flag) {
if(count & 1)
udc_regs->count++;
udc_regs->mode_lo = UDC_MODE_LSEND;
udc_regs->rsel = UDC_RSEL_SEND;
} else {
udc_regs->mode_lo = UDC_MODE_LRECV;
udc_regs->rsel = UDC_RSEL_RECV;
}
/* announce location of regs block */
sun3_udc_write(((dvma_vtob(udc_regs) & 0xff0000) >> 8),
UDC_CHN_HI);
sun3_udc_write((dvma_vtob(udc_regs) & 0xffff), UDC_CHN_LO);
/* set dma master on */
sun3_udc_write(0xd, UDC_MODE);
/* interrupt enable */
sun3_udc_write(UDC_INT_ENABLE, UDC_CSR);
#endif
return count;
}
static int sun3scsi_dma_count(struct NCR5380_hostdata *hostdata,
unsigned char *data, int count)
{
return count;
}
static inline int sun3scsi_dma_recv_setup(struct NCR5380_hostdata *hostdata,
unsigned char *data, int count)
{
return sun3scsi_dma_setup(hostdata, data, count, 0);
}
static inline int sun3scsi_dma_send_setup(struct NCR5380_hostdata *hostdata,
unsigned char *data, int count)
{
return sun3scsi_dma_setup(hostdata, data, count, 1);
}
static int sun3scsi_dma_residual(struct NCR5380_hostdata *hostdata)
{
return last_residual;
}
static int sun3scsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
struct scsi_cmnd *cmd)
{
int wanted_len = cmd->SCp.this_residual;
if (wanted_len < DMA_MIN_SIZE || blk_rq_is_passthrough(cmd->request))
return 0;
return wanted_len;
}
static inline int sun3scsi_dma_start(unsigned long count, unsigned char *data)
{
#ifdef SUN3_SCSI_VME
unsigned short csr;
csr = dregs->csr;
dregs->dma_count_hi = (sun3_dma_orig_count >> 16);
dregs->dma_count_lo = (sun3_dma_orig_count & 0xffff);
dregs->fifo_count_hi = (sun3_dma_orig_count >> 16);
dregs->fifo_count = (sun3_dma_orig_count & 0xffff);
/* if(!(csr & CSR_DMA_ENABLE))
* dregs->csr |= CSR_DMA_ENABLE;
*/
#else
sun3_udc_write(UDC_CHN_START, UDC_CSR);
#endif
return 0;
}
/* clean up after our dma is done */
static int sun3scsi_dma_finish(int write_flag)
{
unsigned short __maybe_unused count;
unsigned short fifo;
int ret = 0;
sun3_dma_active = 0;
#ifdef SUN3_SCSI_VME
dregs->csr &= ~CSR_DMA_ENABLE;
fifo = dregs->fifo_count;
if (write_flag) {
if ((fifo > 0) && (fifo < sun3_dma_orig_count))
fifo++;
}
last_residual = fifo;
/* empty bytes from the fifo which didn't make it */
if ((!write_flag) && (dregs->csr & CSR_LEFT)) {
unsigned char *vaddr;
vaddr = (unsigned char *)dvma_vmetov(sun3_dma_orig_addr);
vaddr += (sun3_dma_orig_count - fifo);
vaddr--;
switch (dregs->csr & CSR_LEFT) {
case CSR_LEFT_3:
*vaddr = (dregs->bpack_lo & 0xff00) >> 8;
vaddr--;
fallthrough;
case CSR_LEFT_2:
*vaddr = (dregs->bpack_hi & 0x00ff);
vaddr--;
fallthrough;
case CSR_LEFT_1:
*vaddr = (dregs->bpack_hi & 0xff00) >> 8;
break;
}
}
#else
// check to empty the fifo on a read
if(!write_flag) {
int tmo = 20000; /* .2 sec */
while(1) {
if(dregs->csr & CSR_FIFO_EMPTY)
break;
if(--tmo <= 0) {
printk("sun3scsi: fifo failed to empty!\n");
return 1;
}
udelay(10);
}
}
dregs->udc_addr = 0x32;
udelay(SUN3_DMA_DELAY);
count = 2 * dregs->udc_data;
udelay(SUN3_DMA_DELAY);
fifo = dregs->fifo_count;
last_residual = fifo;
/* empty bytes from the fifo which didn't make it */
if((!write_flag) && (count - fifo) == 2) {
unsigned short data;
unsigned char *vaddr;
data = dregs->fifo_data;
vaddr = (unsigned char *)dvma_btov(sun3_dma_orig_addr);
vaddr += (sun3_dma_orig_count - fifo);
vaddr[-2] = (data & 0xff00) >> 8;
vaddr[-1] = (data & 0xff);
}
#endif
dvma_unmap(sun3_dma_orig_addr);
sun3_dma_orig_addr = NULL;
#ifdef SUN3_SCSI_VME
dregs->dma_addr_hi = 0;
dregs->dma_addr_lo = 0;
dregs->dma_count_hi = 0;
dregs->dma_count_lo = 0;
dregs->fifo_count = 0;
dregs->fifo_count_hi = 0;
dregs->csr &= ~CSR_SEND;
/* dregs->csr |= CSR_DMA_ENABLE; */
#else
sun3_udc_write(UDC_RESET, UDC_CSR);
dregs->fifo_count = 0;
dregs->csr &= ~CSR_SEND;
/* reset fifo */
dregs->csr &= ~CSR_FIFO;
dregs->csr |= CSR_FIFO;
#endif
sun3_dma_setup_done = NULL;
return ret;
}
#include "NCR5380.c"
#ifdef SUN3_SCSI_VME
#define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
#define DRV_MODULE_NAME "sun3_scsi_vme"
#else
#define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
#define DRV_MODULE_NAME "sun3_scsi"
#endif
#define PFX DRV_MODULE_NAME ": "
static struct scsi_host_template sun3_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
.name = SUN3_SCSI_NAME,
.info = sun3scsi_info,
.queuecommand = sun3scsi_queue_command,
.eh_abort_handler = sun3scsi_abort,
.eh_host_reset_handler = sun3scsi_host_reset,
.can_queue = 16,
.this_id = 7,
scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE Since the scsi subsystem adopted the blk-mq API, a host with zero sg_tablesize crashes with a NULL pointer dereference. blk_queue_max_segments: set to minimum 1 scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:0: Beginning Domain Validation scsi target0:0:0: Domain Validation skipping write tests scsi target0:0:0: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:1: Beginning Domain Validation scsi target0:0:1: Domain Validation skipping write tests scsi target0:0:1: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5 scsi target0:0:2: Beginning Domain Validation scsi target0:0:2: Domain Validation skipping write tests scsi target0:0:2: Ending Domain Validation blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 sr 0:0:2:0: Power-on or device reset occurred sd 0:0:0:0: Power-on or device reset occurred sd 0:0:1:0: Power-on or device reset occurred sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<001cd874>] blk_mq_free_request+0x66/0xe2 SR: 2004 SP: (ptrval) a2: 00874520 d0: 00000000 d1: 00000000 d2: 009ba800 d3: 00000000 d4: 00000000 d5: 08000002 a0: 0087be68 a1: 009a81e0 Process kworker/u2:2 (pid: 15, task=(ptrval)) Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 0000007a 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 0087bd98: 00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4 0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c 00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68 00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000 009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74 00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000 Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14 [<0024d200>] __scsi_execute+0x124/0x174 [<0024d0dc>] __scsi_execute+0x0/0x174 [<00265d10>] sd_revalidate_disk+0xba/0x1f02 [<00265c56>] sd_revalidate_disk+0x0/0x1f02 [<0036ddf4>] strlen+0x0/0x22 [<00227ba0>] device_add+0x3da/0x604 [<0036ddf4>] strlen+0x0/0x22 [<00267e64>] sd_probe+0x30c/0x4b4 [<0002da44>] process_one_work+0x0/0x402 [<0022b978>] really_probe+0x226/0x354 [<0022bc34>] driver_probe_device+0xa4/0xf0 [<0002da44>] process_one_work+0x0/0x402 [<0022bcd0>] __driver_attach_async_helper+0x50/0x70 [<00035dae>] async_run_entry_fn+0x36/0x130 [<0002db88>] process_one_work+0x144/0x402 [<0002e1aa>] worker_thread+0x0/0x570 [<0002e29a>] worker_thread+0xf0/0x570 [<0002e1aa>] worker_thread+0x0/0x570 [<003768d8>] schedule+0x0/0xb8 [<0003f58c>] __init_waitqueue_head+0x0/0x12 [<00033e92>] kthread+0xc2/0xf6 [<000331e8>] kthread_parkme+0x0/0x4e [<003768d8>] schedule+0x0/0xb8 [<00033dd0>] kthread+0x0/0xf6 [<00002c10>] ret_from_kernel_thread+0xc/0x14 Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c Disabling lock debugging due to kernel taint Avoid this by setting sg_tablesize = 1. Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.au Reported-and-tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> References: commit 68ab2d76e4be ("scsi: cxlflash: Set sg_tablesize to 1 instead of SG_NONE") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-11-02 01:06:54 +00:00
.sg_tablesize = 1,
.cmd_per_lun = 2,
.dma_boundary = PAGE_SIZE - 1,
.cmd_size = NCR5380_CMD_SIZE,
};
static int __init sun3_scsi_probe(struct platform_device *pdev)
{
struct Scsi_Host *instance;
struct NCR5380_hostdata *hostdata;
int error;
struct resource *irq, *mem;
void __iomem *ioaddr;
int host_flags = 0;
#ifdef SUN3_SCSI_VME
int i;
#endif
if (setup_can_queue > 0)
sun3_scsi_template.can_queue = setup_can_queue;
if (setup_cmd_per_lun > 0)
sun3_scsi_template.cmd_per_lun = setup_cmd_per_lun;
scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE Since the scsi subsystem adopted the blk-mq API, a host with zero sg_tablesize crashes with a NULL pointer dereference. blk_queue_max_segments: set to minimum 1 scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:0: Beginning Domain Validation scsi target0:0:0: Domain Validation skipping write tests scsi target0:0:0: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:1: Beginning Domain Validation scsi target0:0:1: Domain Validation skipping write tests scsi target0:0:1: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5 scsi target0:0:2: Beginning Domain Validation scsi target0:0:2: Domain Validation skipping write tests scsi target0:0:2: Ending Domain Validation blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 sr 0:0:2:0: Power-on or device reset occurred sd 0:0:0:0: Power-on or device reset occurred sd 0:0:1:0: Power-on or device reset occurred sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<001cd874>] blk_mq_free_request+0x66/0xe2 SR: 2004 SP: (ptrval) a2: 00874520 d0: 00000000 d1: 00000000 d2: 009ba800 d3: 00000000 d4: 00000000 d5: 08000002 a0: 0087be68 a1: 009a81e0 Process kworker/u2:2 (pid: 15, task=(ptrval)) Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 0000007a 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 0087bd98: 00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4 0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c 00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68 00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000 009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74 00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000 Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14 [<0024d200>] __scsi_execute+0x124/0x174 [<0024d0dc>] __scsi_execute+0x0/0x174 [<00265d10>] sd_revalidate_disk+0xba/0x1f02 [<00265c56>] sd_revalidate_disk+0x0/0x1f02 [<0036ddf4>] strlen+0x0/0x22 [<00227ba0>] device_add+0x3da/0x604 [<0036ddf4>] strlen+0x0/0x22 [<00267e64>] sd_probe+0x30c/0x4b4 [<0002da44>] process_one_work+0x0/0x402 [<0022b978>] really_probe+0x226/0x354 [<0022bc34>] driver_probe_device+0xa4/0xf0 [<0002da44>] process_one_work+0x0/0x402 [<0022bcd0>] __driver_attach_async_helper+0x50/0x70 [<00035dae>] async_run_entry_fn+0x36/0x130 [<0002db88>] process_one_work+0x144/0x402 [<0002e1aa>] worker_thread+0x0/0x570 [<0002e29a>] worker_thread+0xf0/0x570 [<0002e1aa>] worker_thread+0x0/0x570 [<003768d8>] schedule+0x0/0xb8 [<0003f58c>] __init_waitqueue_head+0x0/0x12 [<00033e92>] kthread+0xc2/0xf6 [<000331e8>] kthread_parkme+0x0/0x4e [<003768d8>] schedule+0x0/0xb8 [<00033dd0>] kthread+0x0/0xf6 [<00002c10>] ret_from_kernel_thread+0xc/0x14 Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c Disabling lock debugging due to kernel taint Avoid this by setting sg_tablesize = 1. Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.au Reported-and-tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> References: commit 68ab2d76e4be ("scsi: cxlflash: Set sg_tablesize to 1 instead of SG_NONE") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-11-02 01:06:54 +00:00
if (setup_sg_tablesize > 0)
sun3_scsi_template.sg_tablesize = setup_sg_tablesize;
if (setup_hostid >= 0)
sun3_scsi_template.this_id = setup_hostid & 7;
#ifdef SUN3_SCSI_VME
ioaddr = NULL;
for (i = 0; i < 2; i++) {
unsigned char x;
irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
mem = platform_get_resource(pdev, IORESOURCE_MEM, i);
if (!irq || !mem)
break;
ioaddr = sun3_ioremap(mem->start, resource_size(mem),
SUN3_PAGE_TYPE_VME16);
dregs = (struct sun3_dma_regs *)(ioaddr + 8);
if (sun3_map_test((unsigned long)dregs, &x)) {
unsigned short oldcsr;
oldcsr = dregs->csr;
dregs->csr = 0;
udelay(SUN3_DMA_DELAY);
if (dregs->csr == 0x1400)
break;
dregs->csr = oldcsr;
}
iounmap(ioaddr);
ioaddr = NULL;
}
if (!ioaddr)
return -ENODEV;
#else
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!irq || !mem)
return -ENODEV;
ioaddr = ioremap(mem->start, resource_size(mem));
dregs = (struct sun3_dma_regs *)(ioaddr + 8);
udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs));
if (!udc_regs) {
pr_err(PFX "couldn't allocate DVMA memory!\n");
iounmap(ioaddr);
return -ENOMEM;
}
#endif
instance = scsi_host_alloc(&sun3_scsi_template,
sizeof(struct NCR5380_hostdata));
if (!instance) {
error = -ENOMEM;
goto fail_alloc;
}
instance->irq = irq->start;
hostdata = shost_priv(instance);
hostdata->base = mem->start;
hostdata->io = ioaddr;
error = NCR5380_init(instance, host_flags);
if (error)
goto fail_init;
error = request_irq(instance->irq, scsi_sun3_intr, 0,
"NCR5380", instance);
if (error) {
pr_err(PFX "scsi%d: IRQ %d not free, bailing out\n",
instance->host_no, instance->irq);
goto fail_irq;
}
dregs->csr = 0;
udelay(SUN3_DMA_DELAY);
dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
udelay(SUN3_DMA_DELAY);
dregs->fifo_count = 0;
#ifdef SUN3_SCSI_VME
dregs->fifo_count_hi = 0;
dregs->dma_addr_hi = 0;
dregs->dma_addr_lo = 0;
dregs->dma_count_hi = 0;
dregs->dma_count_lo = 0;
dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
#endif
NCR5380_maybe_reset_bus(instance);
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
platform_set_drvdata(pdev, instance);
scsi_scan_host(instance);
return 0;
fail_host:
free_irq(instance->irq, instance);
fail_irq:
NCR5380_exit(instance);
fail_init:
scsi_host_put(instance);
fail_alloc:
if (udc_regs)
dvma_free(udc_regs);
iounmap(ioaddr);
return error;
}
static int __exit sun3_scsi_remove(struct platform_device *pdev)
{
struct Scsi_Host *instance = platform_get_drvdata(pdev);
struct NCR5380_hostdata *hostdata = shost_priv(instance);
void __iomem *ioaddr = hostdata->io;
scsi_remove_host(instance);
free_irq(instance->irq, instance);
NCR5380_exit(instance);
scsi_host_put(instance);
if (udc_regs)
dvma_free(udc_regs);
iounmap(ioaddr);
return 0;
}
static struct platform_driver sun3_scsi_driver = {
.remove = __exit_p(sun3_scsi_remove),
.driver = {
.name = DRV_MODULE_NAME,
},
};
module_platform_driver_probe(sun3_scsi_driver, sun3_scsi_probe);
MODULE_ALIAS("platform:" DRV_MODULE_NAME);
MODULE_LICENSE("GPL");