leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a480f30846
linux/drivers/media/v4l2-core/Makefile

46 lines
1.4 KiB
Makefile
Raw Normal View History

[media] v4l: move v4l2 core into a separate directory Currently, the v4l2 core is mixed together with other non-core drivers. Move them into a separate directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-14 19:35:52 +00:00
#
# Makefile for the V4L2 core
#
tuner-objs := tuner-core.o
videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \
[media] V4L2: support asynchronous subdevice registration Currently bridge device drivers register devices for all subdevices synchronously, typically, during their probing. E.g. if an I2C CMOS sensor is attached to a video bridge device, the bridge driver will create an I2C device and wait for the respective I2C driver to probe. This makes linking of devices straight forward, but this approach cannot be used with intrinsically asynchronous and unordered device registration systems like the Flattened Device Tree. To support such systems this patch adds an asynchronous subdevice registration framework to V4L2. To use it respective (e.g. I2C) subdevice drivers must register themselves with the framework. A bridge driver on the other hand must register notification callbacks, that will be called upon various related events. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-08 10:06:31 +00:00
v4l2-event.o v4l2-ctrls.o v4l2-subdev.o v4l2-clk.o \
v4l2-async.o
[media] v4l: move v4l2 core into a separate directory Currently, the v4l2 core is mixed together with other non-core drivers. Move them into a separate directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-14 19:35:52 +00:00
ifeq ($(CONFIG_COMPAT),y)
videodev-objs += v4l2-compat-ioctl32.o
endif
[media] v4l: fwnode: Support generic fwnode for parsing standardised properties The fwnode_handle is a more generic way than OF device_node to describe firmware nodes. Instead of the OF API, use more generic fwnode API to obtain the same information. As the V4L2 fwnode support will be required by a small minority of e.g. ACPI based systems (the same might actually go for OF), make this a module instead of embedding it in the videodev module. The origins of the V4L2 fwnode framework is in the V4L2 OF framework. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-12 11:05:51 +00:00
obj-$(CONFIG_V4L2_FWNODE) += v4l2-fwnode.o
[media] v4l2: move tracepoint generation into separate file To compile videobuf2-core as a module, the vb2_* tracepoints must be exported from the videodev module. Instead of exporting vb2 tracepoint symbols from v4l2-ioctl.c, move the tracepoint generation into a separate file. This patch fixes the following build error in the modpost stage, introduced by 2091f5181c66 ("[media] videobuf2: add trace events"): ERROR: "__tracepoint_vb2_buf_done" undefined! ERROR: "__tracepoint_vb2_dqbuf" undefined! ERROR: "__tracepoint_vb2_qbuf" undefined! ERROR: "__tracepoint_vb2_buf_queue" undefined! Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-06 12:38:02 +00:00
ifeq ($(CONFIG_TRACEPOINTS),y)
[media] media: videobuf2: Prepare to divide videobuf2 Prepare to divide videobuf2 - Separate vb2 trace events from v4l2 trace event. - Make wrapper functions that will move to v4l2-side. - Make vb2_core_* functions that will remain in core-side. - Add a callback function table for buffer operation which makes vb2-core to be able to invoke a v4l2-side functions. - Rename internal functions as vb2_*. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-06 09:37:48 +00:00
videodev-objs += vb2-trace.o v4l2-trace.o
[media] v4l2: move tracepoint generation into separate file To compile videobuf2-core as a module, the vb2_* tracepoints must be exported from the videodev module. Instead of exporting vb2 tracepoint symbols from v4l2-ioctl.c, move the tracepoint generation into a separate file. This patch fixes the following build error in the modpost stage, introduced by 2091f5181c66 ("[media] videobuf2: add trace events"): ERROR: "__tracepoint_vb2_buf_done" undefined! ERROR: "__tracepoint_vb2_dqbuf" undefined! ERROR: "__tracepoint_vb2_qbuf" undefined! ERROR: "__tracepoint_vb2_buf_queue" undefined! Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-06 12:38:02 +00:00
endif
[media] v4l2-mc: add a generic function to create the media graph The em28xx_v4l2_create_media_graph() is almost generic enough to be at the core, as an ancillary function. Make it even more generic, by getting rid of em28xx-specific code, relying only at the media_device, in order to discover all entities found on PC-customer's hardware and add it at the V4L2 core. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-05 09:02:43 +00:00
videodev-$(CONFIG_MEDIA_CONTROLLER) += v4l2-mc.o
[media] v4l: move v4l2 core into a separate directory Currently, the v4l2 core is mixed together with other non-core drivers. Move them into a separate directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-14 19:35:52 +00:00
[media] fix compilation with both V4L2 and I2C as 'm' When config options are: CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2=m CONFIG_I2C=m Compilation breaks, as reported by: https://bugzilla.kernel.org/show_bug.cgi?id=55681 Before changeset 7b34be71db533f3e0cf93d53cf62d036cdb5418a, no compilation errors occurred. However, the I2C code there at v4l2-device was incorrectly disabled. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-25 15:24:35 +00:00
obj-$(CONFIG_VIDEO_V4L2) += videodev.o
[media] Cleanup media Kconfig files - get rid of ridden V4L2_COMMON symbol This symbol is not needed anymore; it can be folded with V4L2 one, simplifying the Kconfig a little bit; - Comment why some Kconfig items are needed; - Remove if test for MEDIA_CAMERA_SUPPORT, replacing it by depends on. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-20 13:32:19 +00:00
obj-$(CONFIG_VIDEO_V4L2) += v4l2-common.o
[media] v4l2-dv-timings: add new helper module This module makes it easy to filter valid timings from the full list of CEA and DMT timings based on the timings capabilities. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-29 11:40:55 +00:00
obj-$(CONFIG_VIDEO_V4L2) += v4l2-dv-timings.o
[media] v4l: move v4l2 core into a separate directory Currently, the v4l2 core is mixed together with other non-core drivers. Move them into a separate directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-14 19:35:52 +00:00
obj-$(CONFIG_VIDEO_TUNER) += tuner.o
obj-$(CONFIG_V4L2_MEM2MEM_DEV) += v4l2-mem2mem.o
media: Add registration helpers for V4L2 flash sub-devices This patch adds helper functions for registering/unregistering LED Flash class devices as V4L2 sub-devices. The functions should be called from the LED subsystem device driver. In case the support for V4L2 Flash sub-devices is disabled in the kernel config the functions' empty versions will be used. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-06-19 07:31:47 +00:00
obj-$(CONFIG_V4L2_FLASH_LED_CLASS) += v4l2-flash-led-class.o
[media] v4l: move v4l2 core into a separate directory Currently, the v4l2 core is mixed together with other non-core drivers. Move them into a separate directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-14 19:35:52 +00:00
obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o
obj-$(CONFIG_VIDEOBUF_DVB) += videobuf-dvb.o
[media] media: videobuf2: Replace videobuf2-core with videobuf2-v4l2 Make videobuf2-v4l2 as a wrapper of videobuf2-core for v4l2-use. And replace videobuf2-core.h with videobuf2-v4l2.h. This renaming change should be accompanied by the modifications of all device drivers that include videobuf2-core.h. It can be done with just running this shell script. replace() { str1=$1 str2=$2 dir=$3 for file in $(find $dir -name *.h -o -name *.c -o -name Makefile) do echo $file sed "s/$str1/$str2/g" $file > $file.out mv $file.out $file done } replace "videobuf2-core" "videobuf2-v4l2" "include/media/" replace "videobuf2-core" "videobuf2-v4l2" "drivers/media/" replace "videobuf2-core" "videobuf2-v4l2" "drivers/usb/gadget/" replace "videobuf2-core" "videobuf2-v4l2" "drivers/staging/media/" Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-09-22 13:30:29 +00:00
obj-$(CONFIG_VIDEOBUF2_CORE) += videobuf2-core.o videobuf2-v4l2.o
[media] v4l: move v4l2 core into a separate directory Currently, the v4l2 core is mixed together with other non-core drivers. Move them into a separate directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-14 19:35:52 +00:00
obj-$(CONFIG_VIDEOBUF2_MEMOPS) += videobuf2-memops.o
obj-$(CONFIG_VIDEOBUF2_VMALLOC) += videobuf2-vmalloc.o
obj-$(CONFIG_VIDEOBUF2_DMA_CONTIG) += videobuf2-dma-contig.o
obj-$(CONFIG_VIDEOBUF2_DMA_SG) += videobuf2-dma-sg.o
[media] vb2: Add videobuf2-dvb support With the new vb2_thread_start/stop core code it is very easy to implement videobuf2-dvb. This should simplify converting existing videobuf drivers to vb2. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-09 11:01:05 +00:00
obj-$(CONFIG_VIDEOBUF2_DVB) += videobuf2-dvb.o
[media] v4l: move v4l2 core into a separate directory Currently, the v4l2 core is mixed together with other non-core drivers. Move them into a separate directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-14 19:35:52 +00:00
[media] dvb: move the dvb core one level up just like the V4L2 core, move the DVB core to drivers/media, as the intention is to get rid of both "video" and "dvb" directories. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-14 19:35:53 +00:00
ccflags-y += -I$(srctree)/drivers/media/dvb-core
[media] move the dvb/frontends to drivers/media/dvb-frontends Raise the DVB frontends one level up, as the intention is to remove the drivers/media/dvb directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-14 02:13:41 +00:00
ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
[media] common: move media/common/tuners to media/tuners Move the tuners one level up, as the "common" directory will be used by drivers that are shared between more than one driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-14 19:35:59 +00:00
ccflags-y += -I$(srctree)/drivers/media/tuners
[media] v4l: move v4l2 core into a separate directory Currently, the v4l2 core is mixed together with other non-core drivers. Move them into a separate directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-14 19:35:52 +00:00
Reference in New Issue Copy Permalink