linux/drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h

536 lines
21 KiB
C
Raw Normal View History

Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 01:15:23 +00:00
/**********************************************************************
* Author: Cavium, Inc.
*
* Contact: support@cavium.com
* Please include "LiquidIO" in the subject.
*
* Copyright (c) 2003-2015 Cavium, Inc.
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium, Inc. for more information
**********************************************************************/
/*! \file cn66xx_regs.h
* \brief Host Driver: Register Address and Register Mask values for
* Octeon CN66XX devices.
*/
#ifndef __CN66XX_REGS_H__
#define __CN66XX_REGS_H__
#define CN6XXX_XPANSION_BAR 0x30
#define CN6XXX_MSI_CAP 0x50
#define CN6XXX_MSI_ADDR_LO 0x54
#define CN6XXX_MSI_ADDR_HI 0x58
#define CN6XXX_MSI_DATA 0x5C
#define CN6XXX_PCIE_CAP 0x70
#define CN6XXX_PCIE_DEVCAP 0x74
#define CN6XXX_PCIE_DEVCTL 0x78
#define CN6XXX_PCIE_LINKCAP 0x7C
#define CN6XXX_PCIE_LINKCTL 0x80
#define CN6XXX_PCIE_SLOTCAP 0x84
#define CN6XXX_PCIE_SLOTCTL 0x88
#define CN6XXX_PCIE_ENH_CAP 0x100
#define CN6XXX_PCIE_UNCORR_ERR_STATUS 0x104
#define CN6XXX_PCIE_UNCORR_ERR_MASK 0x108
#define CN6XXX_PCIE_UNCORR_ERR 0x10C
#define CN6XXX_PCIE_CORR_ERR_STATUS 0x110
#define CN6XXX_PCIE_CORR_ERR_MASK 0x114
#define CN6XXX_PCIE_ADV_ERR_CAP 0x118
#define CN6XXX_PCIE_ACK_REPLAY_TIMER 0x700
#define CN6XXX_PCIE_OTHER_MSG 0x704
#define CN6XXX_PCIE_PORT_FORCE_LINK 0x708
#define CN6XXX_PCIE_ACK_FREQ 0x70C
#define CN6XXX_PCIE_PORT_LINK_CTL 0x710
#define CN6XXX_PCIE_LANE_SKEW 0x714
#define CN6XXX_PCIE_SYM_NUM 0x718
#define CN6XXX_PCIE_FLTMSK 0x720
/* ############## BAR0 Registers ################ */
#define CN6XXX_SLI_CTL_PORT0 0x0050
#define CN6XXX_SLI_CTL_PORT1 0x0060
#define CN6XXX_SLI_WINDOW_CTL 0x02E0
#define CN6XXX_SLI_DBG_DATA 0x0310
#define CN6XXX_SLI_SCRATCH1 0x03C0
#define CN6XXX_SLI_SCRATCH2 0x03D0
#define CN6XXX_SLI_CTL_STATUS 0x0570
#define CN6XXX_WIN_WR_ADDR_LO 0x0000
#define CN6XXX_WIN_WR_ADDR_HI 0x0004
#define CN6XXX_WIN_WR_ADDR64 CN6XXX_WIN_WR_ADDR_LO
#define CN6XXX_WIN_RD_ADDR_LO 0x0010
#define CN6XXX_WIN_RD_ADDR_HI 0x0014
#define CN6XXX_WIN_RD_ADDR64 CN6XXX_WIN_RD_ADDR_LO
#define CN6XXX_WIN_WR_DATA_LO 0x0020
#define CN6XXX_WIN_WR_DATA_HI 0x0024
#define CN6XXX_WIN_WR_DATA64 CN6XXX_WIN_WR_DATA_LO
#define CN6XXX_WIN_RD_DATA_LO 0x0040
#define CN6XXX_WIN_RD_DATA_HI 0x0044
#define CN6XXX_WIN_RD_DATA64 CN6XXX_WIN_RD_DATA_LO
#define CN6XXX_WIN_WR_MASK_LO 0x0030
#define CN6XXX_WIN_WR_MASK_HI 0x0034
#define CN6XXX_WIN_WR_MASK_REG CN6XXX_WIN_WR_MASK_LO
/* 1 register (32-bit) to enable Input queues */
#define CN6XXX_SLI_PKT_INSTR_ENB 0x1000
/* 1 register (32-bit) to enable Output queues */
#define CN6XXX_SLI_PKT_OUT_ENB 0x1010
/* 1 register (32-bit) to determine whether Output queues are in reset. */
#define CN6XXX_SLI_PORT_IN_RST_OQ 0x11F0
/* 1 register (32-bit) to determine whether Input queues are in reset. */
#define CN6XXX_SLI_PORT_IN_RST_IQ 0x11F4
/*###################### REQUEST QUEUE #########################*/
/* 1 register (32-bit) - instr. size of each input queue. */
#define CN6XXX_SLI_PKT_INSTR_SIZE 0x1020
/* 32 registers for Input Queue Instr Count - SLI_PKT_IN_DONE0_CNTS */
#define CN6XXX_SLI_IQ_INSTR_COUNT_START 0x2000
/* 32 registers for Input Queue Start Addr - SLI_PKT0_INSTR_BADDR */
#define CN6XXX_SLI_IQ_BASE_ADDR_START64 0x2800
/* 32 registers for Input Doorbell - SLI_PKT0_INSTR_BAOFF_DBELL */
#define CN6XXX_SLI_IQ_DOORBELL_START 0x2C00
/* 32 registers for Input Queue size - SLI_PKT0_INSTR_FIFO_RSIZE */
#define CN6XXX_SLI_IQ_SIZE_START 0x3000
/* 32 registers for Instruction Header Options - SLI_PKT0_INSTR_HEADER */
#define CN6XXX_SLI_IQ_PKT_INSTR_HDR_START64 0x3400
/* 1 register (64-bit) - Back Pressure for each input queue - SLI_PKT0_IN_BP */
#define CN66XX_SLI_INPUT_BP_START64 0x3800
/* Each Input Queue register is at a 16-byte Offset in BAR0 */
#define CN6XXX_IQ_OFFSET 0x10
/* 1 register (32-bit) - ES, RO, NS, Arbitration for Input Queue Data &
* gather list fetches. SLI_PKT_INPUT_CONTROL.
*/
#define CN6XXX_SLI_PKT_INPUT_CONTROL 0x1170
/* 1 register (64-bit) - Number of instructions to read at one time
* - 2 bits for each input ring. SLI_PKT_INSTR_RD_SIZE.
*/
#define CN6XXX_SLI_PKT_INSTR_RD_SIZE 0x11A0
/* 1 register (64-bit) - Assign Input ring to MAC port
* - 2 bits for each input ring. SLI_PKT_IN_PCIE_PORT.
*/
#define CN6XXX_SLI_IN_PCIE_PORT 0x11B0
/*------- Request Queue Macros ---------*/
#define CN6XXX_SLI_IQ_BASE_ADDR64(iq) \
(CN6XXX_SLI_IQ_BASE_ADDR_START64 + ((iq) * CN6XXX_IQ_OFFSET))
#define CN6XXX_SLI_IQ_SIZE(iq) \
(CN6XXX_SLI_IQ_SIZE_START + ((iq) * CN6XXX_IQ_OFFSET))
#define CN6XXX_SLI_IQ_PKT_INSTR_HDR64(iq) \
(CN6XXX_SLI_IQ_PKT_INSTR_HDR_START64 + ((iq) * CN6XXX_IQ_OFFSET))
#define CN6XXX_SLI_IQ_DOORBELL(iq) \
(CN6XXX_SLI_IQ_DOORBELL_START + ((iq) * CN6XXX_IQ_OFFSET))
#define CN6XXX_SLI_IQ_INSTR_COUNT(iq) \
(CN6XXX_SLI_IQ_INSTR_COUNT_START + ((iq) * CN6XXX_IQ_OFFSET))
#define CN66XX_SLI_IQ_BP64(iq) \
(CN66XX_SLI_INPUT_BP_START64 + ((iq) * CN6XXX_IQ_OFFSET))
/*------------------ Masks ----------------*/
#define CN6XXX_INPUT_CTL_ROUND_ROBIN_ARB BIT(22)
#define CN6XXX_INPUT_CTL_DATA_NS BIT(8)
#define CN6XXX_INPUT_CTL_DATA_ES_64B_SWAP BIT(6)
#define CN6XXX_INPUT_CTL_DATA_RO BIT(5)
#define CN6XXX_INPUT_CTL_USE_CSR BIT(4)
#define CN6XXX_INPUT_CTL_GATHER_NS BIT(3)
#define CN6XXX_INPUT_CTL_GATHER_ES_64B_SWAP BIT(2)
#define CN6XXX_INPUT_CTL_GATHER_RO BIT(1)
#ifdef __BIG_ENDIAN_BITFIELD
#define CN6XXX_INPUT_CTL_MASK \
(CN6XXX_INPUT_CTL_DATA_ES_64B_SWAP \
| CN6XXX_INPUT_CTL_USE_CSR \
| CN6XXX_INPUT_CTL_GATHER_ES_64B_SWAP)
#else
#define CN6XXX_INPUT_CTL_MASK \
(CN6XXX_INPUT_CTL_DATA_ES_64B_SWAP \
| CN6XXX_INPUT_CTL_USE_CSR)
#endif
/*############################ OUTPUT QUEUE #########################*/
/* 32 registers for Output queue buffer and info size - SLI_PKT0_OUT_SIZE */
#define CN6XXX_SLI_OQ0_BUFF_INFO_SIZE 0x0C00
/* 32 registers for Output Queue Start Addr - SLI_PKT0_SLIST_BADDR */
#define CN6XXX_SLI_OQ_BASE_ADDR_START64 0x1400
/* 32 registers for Output Queue Packet Credits - SLI_PKT0_SLIST_BAOFF_DBELL */
#define CN6XXX_SLI_OQ_PKT_CREDITS_START 0x1800
/* 32 registers for Output Queue size - SLI_PKT0_SLIST_FIFO_RSIZE */
#define CN6XXX_SLI_OQ_SIZE_START 0x1C00
/* 32 registers for Output Queue Packet Count - SLI_PKT0_CNTS */
#define CN6XXX_SLI_OQ_PKT_SENT_START 0x2400
/* Each Output Queue register is at a 16-byte Offset in BAR0 */
#define CN6XXX_OQ_OFFSET 0x10
/* 1 register (32-bit) - 1 bit for each output queue
* - Relaxed Ordering setting for reading Output Queues descriptors
* - SLI_PKT_SLIST_ROR
*/
#define CN6XXX_SLI_PKT_SLIST_ROR 0x1030
/* 1 register (32-bit) - 1 bit for each output queue
* - No Snoop mode for reading Output Queues descriptors
* - SLI_PKT_SLIST_NS
*/
#define CN6XXX_SLI_PKT_SLIST_NS 0x1040
/* 1 register (64-bit) - 2 bits for each output queue
* - Endian-Swap mode for reading Output Queue descriptors
* - SLI_PKT_SLIST_ES
*/
#define CN6XXX_SLI_PKT_SLIST_ES64 0x1050
/* 1 register (32-bit) - 1 bit for each output queue
* - InfoPtr mode for Output Queues.
* - SLI_PKT_IPTR
*/
#define CN6XXX_SLI_PKT_IPTR 0x1070
/* 1 register (32-bit) - 1 bit for each output queue
* - DPTR format selector for Output queues.
* - SLI_PKT_DPADDR
*/
#define CN6XXX_SLI_PKT_DPADDR 0x1080
/* 1 register (32-bit) - 1 bit for each output queue
* - Relaxed Ordering setting for reading Output Queues data
* - SLI_PKT_DATA_OUT_ROR
*/
#define CN6XXX_SLI_PKT_DATA_OUT_ROR 0x1090
/* 1 register (32-bit) - 1 bit for each output queue
* - No Snoop mode for reading Output Queues data
* - SLI_PKT_DATA_OUT_NS
*/
#define CN6XXX_SLI_PKT_DATA_OUT_NS 0x10A0
/* 1 register (64-bit) - 2 bits for each output queue
* - Endian-Swap mode for reading Output Queue data
* - SLI_PKT_DATA_OUT_ES
*/
#define CN6XXX_SLI_PKT_DATA_OUT_ES64 0x10B0
/* 1 register (32-bit) - 1 bit for each output queue
* - Controls whether SLI_PKTn_CNTS is incremented for bytes or for packets.
* - SLI_PKT_OUT_BMODE
*/
#define CN6XXX_SLI_PKT_OUT_BMODE 0x10D0
/* 1 register (64-bit) - 2 bits for each output queue
* - Assign PCIE port for Output queues
* - SLI_PKT_PCIE_PORT.
*/
#define CN6XXX_SLI_PKT_PCIE_PORT64 0x10E0
/* 1 (64-bit) register for Output Queue Packet Count Interrupt Threshold
* & Time Threshold. The same setting applies to all 32 queues.
* The register is defined as a 64-bit registers, but we use the
* 32-bit offsets to define distinct addresses.
*/
#define CN6XXX_SLI_OQ_INT_LEVEL_PKTS 0x1120
#define CN6XXX_SLI_OQ_INT_LEVEL_TIME 0x1124
/* 1 (64-bit register) for Output Queue backpressure across all rings. */
#define CN6XXX_SLI_OQ_WMARK 0x1180
/* 1 register to control output queue global backpressure & ring enable. */
#define CN6XXX_SLI_PKT_CTL 0x1220
/*------- Output Queue Macros ---------*/
#define CN6XXX_SLI_OQ_BASE_ADDR64(oq) \
(CN6XXX_SLI_OQ_BASE_ADDR_START64 + ((oq) * CN6XXX_OQ_OFFSET))
#define CN6XXX_SLI_OQ_SIZE(oq) \
(CN6XXX_SLI_OQ_SIZE_START + ((oq) * CN6XXX_OQ_OFFSET))
#define CN6XXX_SLI_OQ_BUFF_INFO_SIZE(oq) \
(CN6XXX_SLI_OQ0_BUFF_INFO_SIZE + ((oq) * CN6XXX_OQ_OFFSET))
#define CN6XXX_SLI_OQ_PKTS_SENT(oq) \
(CN6XXX_SLI_OQ_PKT_SENT_START + ((oq) * CN6XXX_OQ_OFFSET))
#define CN6XXX_SLI_OQ_PKTS_CREDIT(oq) \
(CN6XXX_SLI_OQ_PKT_CREDITS_START + ((oq) * CN6XXX_OQ_OFFSET))
/*######################### DMA Counters #########################*/
/* 2 registers (64-bit) - DMA Count - 1 for each DMA counter 0/1. */
#define CN6XXX_DMA_CNT_START 0x0400
/* 2 registers (64-bit) - DMA Timer 0/1, contains DMA timer values
* SLI_DMA_0_TIM
*/
#define CN6XXX_DMA_TIM_START 0x0420
/* 2 registers (64-bit) - DMA count & Time Interrupt threshold -
* SLI_DMA_0_INT_LEVEL
*/
#define CN6XXX_DMA_INT_LEVEL_START 0x03E0
/* Each DMA register is at a 16-byte Offset in BAR0 */
#define CN6XXX_DMA_OFFSET 0x10
/*---------- DMA Counter Macros ---------*/
#define CN6XXX_DMA_CNT(dq) \
(CN6XXX_DMA_CNT_START + ((dq) * CN6XXX_DMA_OFFSET))
#define CN6XXX_DMA_INT_LEVEL(dq) \
(CN6XXX_DMA_INT_LEVEL_START + ((dq) * CN6XXX_DMA_OFFSET))
#define CN6XXX_DMA_PKT_INT_LEVEL(dq) \
(CN6XXX_DMA_INT_LEVEL_START + ((dq) * CN6XXX_DMA_OFFSET))
#define CN6XXX_DMA_TIME_INT_LEVEL(dq) \
(CN6XXX_DMA_INT_LEVEL_START + 4 + ((dq) * CN6XXX_DMA_OFFSET))
#define CN6XXX_DMA_TIM(dq) \
(CN6XXX_DMA_TIM_START + ((dq) * CN6XXX_DMA_OFFSET))
/*######################## INTERRUPTS #########################*/
/* 1 register (64-bit) for Interrupt Summary */
#define CN6XXX_SLI_INT_SUM64 0x0330
/* 1 register (64-bit) for Interrupt Enable */
#define CN6XXX_SLI_INT_ENB64_PORT0 0x0340
#define CN6XXX_SLI_INT_ENB64_PORT1 0x0350
/* 1 register (32-bit) to enable Output Queue Packet/Byte Count Interrupt */
#define CN6XXX_SLI_PKT_CNT_INT_ENB 0x1150
/* 1 register (32-bit) to enable Output Queue Packet Timer Interrupt */
#define CN6XXX_SLI_PKT_TIME_INT_ENB 0x1160
/* 1 register (32-bit) to indicate which Output Queue reached pkt threshold */
#define CN6XXX_SLI_PKT_CNT_INT 0x1130
/* 1 register (32-bit) to indicate which Output Queue reached time threshold */
#define CN6XXX_SLI_PKT_TIME_INT 0x1140
/*------------------ Interrupt Masks ----------------*/
#define CN6XXX_INTR_RML_TIMEOUT_ERR BIT(1)
#define CN6XXX_INTR_BAR0_RW_TIMEOUT_ERR BIT(2)
#define CN6XXX_INTR_IO2BIG_ERR BIT(3)
#define CN6XXX_INTR_PKT_COUNT BIT(4)
#define CN6XXX_INTR_PKT_TIME BIT(5)
#define CN6XXX_INTR_M0UPB0_ERR BIT(8)
#define CN6XXX_INTR_M0UPWI_ERR BIT(9)
#define CN6XXX_INTR_M0UNB0_ERR BIT(10)
#define CN6XXX_INTR_M0UNWI_ERR BIT(11)
#define CN6XXX_INTR_M1UPB0_ERR BIT(12)
#define CN6XXX_INTR_M1UPWI_ERR BIT(13)
#define CN6XXX_INTR_M1UNB0_ERR BIT(14)
#define CN6XXX_INTR_M1UNWI_ERR BIT(15)
#define CN6XXX_INTR_MIO_INT0 BIT(16)
#define CN6XXX_INTR_MIO_INT1 BIT(17)
#define CN6XXX_INTR_MAC_INT0 BIT(18)
#define CN6XXX_INTR_MAC_INT1 BIT(19)
#define CN6XXX_INTR_DMA0_FORCE BIT_ULL(32)
#define CN6XXX_INTR_DMA1_FORCE BIT_ULL(33)
#define CN6XXX_INTR_DMA0_COUNT BIT_ULL(34)
#define CN6XXX_INTR_DMA1_COUNT BIT_ULL(35)
#define CN6XXX_INTR_DMA0_TIME BIT_ULL(36)
#define CN6XXX_INTR_DMA1_TIME BIT_ULL(37)
#define CN6XXX_INTR_INSTR_DB_OF_ERR BIT_ULL(48)
#define CN6XXX_INTR_SLIST_DB_OF_ERR BIT_ULL(49)
#define CN6XXX_INTR_POUT_ERR BIT_ULL(50)
#define CN6XXX_INTR_PIN_BP_ERR BIT_ULL(51)
#define CN6XXX_INTR_PGL_ERR BIT_ULL(52)
#define CN6XXX_INTR_PDI_ERR BIT_ULL(53)
#define CN6XXX_INTR_POP_ERR BIT_ULL(54)
#define CN6XXX_INTR_PINS_ERR BIT_ULL(55)
#define CN6XXX_INTR_SPRT0_ERR BIT_ULL(56)
#define CN6XXX_INTR_SPRT1_ERR BIT_ULL(57)
#define CN6XXX_INTR_ILL_PAD_ERR BIT_ULL(60)
#define CN6XXX_INTR_DMA0_DATA (CN6XXX_INTR_DMA0_TIME)
#define CN6XXX_INTR_DMA1_DATA (CN6XXX_INTR_DMA1_TIME)
#define CN6XXX_INTR_DMA_DATA \
(CN6XXX_INTR_DMA0_DATA | CN6XXX_INTR_DMA1_DATA)
#define CN6XXX_INTR_PKT_DATA (CN6XXX_INTR_PKT_TIME | \
CN6XXX_INTR_PKT_COUNT)
/* Sum of interrupts for all PCI-Express Data Interrupts */
#define CN6XXX_INTR_PCIE_DATA \
(CN6XXX_INTR_DMA_DATA | CN6XXX_INTR_PKT_DATA)
#define CN6XXX_INTR_MIO \
(CN6XXX_INTR_MIO_INT0 | CN6XXX_INTR_MIO_INT1)
#define CN6XXX_INTR_MAC \
(CN6XXX_INTR_MAC_INT0 | CN6XXX_INTR_MAC_INT1)
/* Sum of interrupts for error events */
#define CN6XXX_INTR_ERR \
(CN6XXX_INTR_BAR0_RW_TIMEOUT_ERR \
| CN6XXX_INTR_IO2BIG_ERR \
| CN6XXX_INTR_M0UPB0_ERR \
| CN6XXX_INTR_M0UPWI_ERR \
| CN6XXX_INTR_M0UNB0_ERR \
| CN6XXX_INTR_M0UNWI_ERR \
| CN6XXX_INTR_M1UPB0_ERR \
| CN6XXX_INTR_M1UPWI_ERR \
| CN6XXX_INTR_M1UPB0_ERR \
| CN6XXX_INTR_M1UNWI_ERR \
| CN6XXX_INTR_INSTR_DB_OF_ERR \
| CN6XXX_INTR_SLIST_DB_OF_ERR \
| CN6XXX_INTR_POUT_ERR \
| CN6XXX_INTR_PIN_BP_ERR \
| CN6XXX_INTR_PGL_ERR \
| CN6XXX_INTR_PDI_ERR \
| CN6XXX_INTR_POP_ERR \
| CN6XXX_INTR_PINS_ERR \
| CN6XXX_INTR_SPRT0_ERR \
| CN6XXX_INTR_SPRT1_ERR \
| CN6XXX_INTR_ILL_PAD_ERR)
/* Programmed Mask for Interrupt Sum */
#define CN6XXX_INTR_MASK \
(CN6XXX_INTR_PCIE_DATA \
| CN6XXX_INTR_DMA0_FORCE \
| CN6XXX_INTR_DMA1_FORCE \
| CN6XXX_INTR_MIO \
| CN6XXX_INTR_MAC \
| CN6XXX_INTR_ERR)
#define CN6XXX_SLI_S2M_PORT0_CTL 0x3D80
#define CN6XXX_SLI_S2M_PORT1_CTL 0x3D90
#define CN6XXX_SLI_S2M_PORTX_CTL(port) \
(CN6XXX_SLI_S2M_PORT0_CTL + (port * 0x10))
#define CN6XXX_SLI_INT_ENB64(port) \
(CN6XXX_SLI_INT_ENB64_PORT0 + (port * 0x10))
#define CN6XXX_SLI_MAC_NUMBER 0x3E00
/* CN6XXX BAR1 Index registers. */
#define CN6XXX_PEM_BAR1_INDEX000 0x00011800C00000A8ULL
#define CN6XXX_PEM_OFFSET 0x0000000001000000ULL
#define CN6XXX_BAR1_INDEX_START CN6XXX_PEM_BAR1_INDEX000
#define CN6XXX_PCI_BAR1_OFFSET 0x8
#define CN6XXX_BAR1_REG(idx, port) \
(CN6XXX_BAR1_INDEX_START + (port * CN6XXX_PEM_OFFSET) + \
(CN6XXX_PCI_BAR1_OFFSET * (idx)))
/*############################ DPI #########################*/
#define CN6XXX_DPI_CTL 0x0001df0000000040ULL
#define CN6XXX_DPI_DMA_CONTROL 0x0001df0000000048ULL
#define CN6XXX_DPI_REQ_GBL_ENB 0x0001df0000000050ULL
#define CN6XXX_DPI_REQ_ERR_RSP 0x0001df0000000058ULL
#define CN6XXX_DPI_REQ_ERR_RST 0x0001df0000000060ULL
#define CN6XXX_DPI_DMA_ENG0_ENB 0x0001df0000000080ULL
#define CN6XXX_DPI_DMA_ENG_ENB(q_no) \
(CN6XXX_DPI_DMA_ENG0_ENB + (q_no * 8))
#define CN6XXX_DPI_DMA_ENG0_BUF 0x0001df0000000880ULL
#define CN6XXX_DPI_DMA_ENG_BUF(q_no) \
(CN6XXX_DPI_DMA_ENG0_BUF + (q_no * 8))
#define CN6XXX_DPI_SLI_PRT0_CFG 0x0001df0000000900ULL
#define CN6XXX_DPI_SLI_PRT1_CFG 0x0001df0000000908ULL
#define CN6XXX_DPI_SLI_PRTX_CFG(port) \
(CN6XXX_DPI_SLI_PRT0_CFG + (port * 0x10))
#define CN6XXX_DPI_DMA_COMMIT_MODE BIT_ULL(58)
#define CN6XXX_DPI_DMA_PKT_HP BIT_ULL(57)
#define CN6XXX_DPI_DMA_PKT_EN BIT_ULL(56)
#define CN6XXX_DPI_DMA_O_ES BIT_ULL(15)
#define CN6XXX_DPI_DMA_O_MODE BIT_ULL(14)
#define CN6XXX_DPI_DMA_CTL_MASK \
(CN6XXX_DPI_DMA_COMMIT_MODE | \
CN6XXX_DPI_DMA_PKT_HP | \
CN6XXX_DPI_DMA_PKT_EN | \
CN6XXX_DPI_DMA_O_ES | \
CN6XXX_DPI_DMA_O_MODE)
/*############################ CIU #########################*/
#define CN6XXX_CIU_SOFT_BIST 0x0001070000000738ULL
#define CN6XXX_CIU_SOFT_RST 0x0001070000000740ULL
/*############################ MIO #########################*/
#define CN6XXX_MIO_PTP_CLOCK_CFG 0x0001070000000f00ULL
#define CN6XXX_MIO_PTP_CLOCK_LO 0x0001070000000f08ULL
#define CN6XXX_MIO_PTP_CLOCK_HI 0x0001070000000f10ULL
#define CN6XXX_MIO_PTP_CLOCK_COMP 0x0001070000000f18ULL
#define CN6XXX_MIO_PTP_TIMESTAMP 0x0001070000000f20ULL
#define CN6XXX_MIO_PTP_EVT_CNT 0x0001070000000f28ULL
#define CN6XXX_MIO_PTP_CKOUT_THRESH_LO 0x0001070000000f30ULL
#define CN6XXX_MIO_PTP_CKOUT_THRESH_HI 0x0001070000000f38ULL
#define CN6XXX_MIO_PTP_CKOUT_HI_INCR 0x0001070000000f40ULL
#define CN6XXX_MIO_PTP_CKOUT_LO_INCR 0x0001070000000f48ULL
#define CN6XXX_MIO_PTP_PPS_THRESH_LO 0x0001070000000f50ULL
#define CN6XXX_MIO_PTP_PPS_THRESH_HI 0x0001070000000f58ULL
#define CN6XXX_MIO_PTP_PPS_HI_INCR 0x0001070000000f60ULL
#define CN6XXX_MIO_PTP_PPS_LO_INCR 0x0001070000000f68ULL
#define CN6XXX_MIO_QLM4_CFG 0x00011800000015B0ULL
#define CN6XXX_MIO_RST_BOOT 0x0001180000001600ULL
#define CN6XXX_MIO_QLM_CFG_MASK 0x7
/*############################ LMC #########################*/
#define CN6XXX_LMC0_RESET_CTL 0x0001180088000180ULL
#define CN6XXX_LMC0_RESET_CTL_DDR3RST_MASK 0x0000000000000001ULL
#endif