linux/net/core/xdp.c

450 lines
10 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/* net/core/xdp.c
*
* Copyright (c) 2017 Jesper Dangaard Brouer, Red Hat Inc.
*/
#include <linux/bpf.h>
#include <linux/filter.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/netdevice.h>
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
#include <linux/slab.h>
#include <linux/idr.h>
#include <linux/rhashtable.h>
#include <net/page_pool.h>
#include <net/xdp.h>
#define REG_STATE_NEW 0x0
#define REG_STATE_REGISTERED 0x1
#define REG_STATE_UNREGISTERED 0x2
#define REG_STATE_UNUSED 0x3
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
static DEFINE_IDA(mem_id_pool);
static DEFINE_MUTEX(mem_id_lock);
#define MEM_ID_MAX 0xFFFE
#define MEM_ID_MIN 1
static int mem_id_next = MEM_ID_MIN;
static bool mem_id_init; /* false */
static struct rhashtable *mem_id_ht;
struct xdp_mem_allocator {
struct xdp_mem_info mem;
union {
void *allocator;
struct page_pool *page_pool;
struct zero_copy_allocator *zc_alloc;
};
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
struct rhash_head node;
struct rcu_head rcu;
};
static u32 xdp_mem_id_hashfn(const void *data, u32 len, u32 seed)
{
const u32 *k = data;
const u32 key = *k;
BUILD_BUG_ON(FIELD_SIZEOF(struct xdp_mem_allocator, mem.id)
!= sizeof(u32));
/* Use cyclic increasing ID as direct hash key */
return key;
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
}
static int xdp_mem_id_cmp(struct rhashtable_compare_arg *arg,
const void *ptr)
{
const struct xdp_mem_allocator *xa = ptr;
u32 mem_id = *(u32 *)arg->key;
return xa->mem.id != mem_id;
}
static const struct rhashtable_params mem_id_rht_params = {
.nelem_hint = 64,
.head_offset = offsetof(struct xdp_mem_allocator, node),
.key_offset = offsetof(struct xdp_mem_allocator, mem.id),
.key_len = FIELD_SIZEOF(struct xdp_mem_allocator, mem.id),
.max_size = MEM_ID_MAX,
.min_size = 8,
.automatic_shrinking = true,
.hashfn = xdp_mem_id_hashfn,
.obj_cmpfn = xdp_mem_id_cmp,
};
static void __xdp_mem_allocator_rcu_free(struct rcu_head *rcu)
{
struct xdp_mem_allocator *xa;
xa = container_of(rcu, struct xdp_mem_allocator, rcu);
/* Allow this ID to be reused */
ida_simple_remove(&mem_id_pool, xa->mem.id);
/* Notice, driver is expected to free the *allocator,
* e.g. page_pool, and MUST also use RCU free.
*/
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
/* Poison memory */
xa->mem.id = 0xFFFF;
xa->mem.type = 0xF0F0;
xa->allocator = (void *)0xDEAD9001;
kfree(xa);
}
void xdp_rxq_info_unreg_mem_model(struct xdp_rxq_info *xdp_rxq)
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
{
struct xdp_mem_allocator *xa;
int id = xdp_rxq->mem.id;
if (xdp_rxq->reg_state != REG_STATE_REGISTERED) {
WARN(1, "Missing register, driver bug");
return;
}
if (xdp_rxq->mem.type != MEM_TYPE_PAGE_POOL &&
xdp_rxq->mem.type != MEM_TYPE_ZERO_COPY) {
return;
}
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
if (id == 0)
return;
mutex_lock(&mem_id_lock);
net/xdp: Fix suspicious RCU usage warning Fix the warning below by calling rhashtable_lookup_fast. Also, make some code movements for better quality and human readability. [ 342.450870] WARNING: suspicious RCU usage [ 342.455856] 4.18.0-rc2+ #17 Tainted: G O [ 342.462210] ----------------------------- [ 342.467202] ./include/linux/rhashtable.h:481 suspicious rcu_dereference_check() usage! [ 342.476568] [ 342.476568] other info that might help us debug this: [ 342.476568] [ 342.486978] [ 342.486978] rcu_scheduler_active = 2, debug_locks = 1 [ 342.495211] 4 locks held by modprobe/3934: [ 342.500265] #0: 00000000e23116b2 (mlx5_intf_mutex){+.+.}, at: mlx5_unregister_interface+0x18/0x90 [mlx5_core] [ 342.511953] #1: 00000000ca16db96 (rtnl_mutex){+.+.}, at: unregister_netdev+0xe/0x20 [ 342.521109] #2: 00000000a46e2c4b (&priv->state_lock){+.+.}, at: mlx5e_close+0x29/0x60 [mlx5_core] [ 342.531642] #3: 0000000060c5bde3 (mem_id_lock){+.+.}, at: xdp_rxq_info_unreg+0x93/0x6b0 [ 342.541206] [ 342.541206] stack backtrace: [ 342.547075] CPU: 12 PID: 3934 Comm: modprobe Tainted: G O 4.18.0-rc2+ #17 [ 342.556621] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [ 342.565606] Call Trace: [ 342.568861] dump_stack+0x78/0xb3 [ 342.573086] xdp_rxq_info_unreg+0x3f5/0x6b0 [ 342.578285] ? __call_rcu+0x220/0x300 [ 342.582911] mlx5e_free_rq+0x38/0xc0 [mlx5_core] [ 342.588602] mlx5e_close_channel+0x20/0x120 [mlx5_core] [ 342.594976] mlx5e_close_channels+0x26/0x40 [mlx5_core] [ 342.601345] mlx5e_close_locked+0x44/0x50 [mlx5_core] [ 342.607519] mlx5e_close+0x42/0x60 [mlx5_core] [ 342.613005] __dev_close_many+0xb1/0x120 [ 342.617911] dev_close_many+0xa2/0x170 [ 342.622622] rollback_registered_many+0x148/0x460 [ 342.628401] ? __lock_acquire+0x48d/0x11b0 [ 342.633498] ? unregister_netdev+0xe/0x20 [ 342.638495] rollback_registered+0x56/0x90 [ 342.643588] unregister_netdevice_queue+0x7e/0x100 [ 342.649461] unregister_netdev+0x18/0x20 [ 342.654362] mlx5e_remove+0x2a/0x50 [mlx5_core] [ 342.659944] mlx5_remove_device+0xe5/0x110 [mlx5_core] [ 342.666208] mlx5_unregister_interface+0x39/0x90 [mlx5_core] [ 342.673038] cleanup+0x5/0xbfc [mlx5_core] [ 342.678094] __x64_sys_delete_module+0x16b/0x240 [ 342.683725] ? do_syscall_64+0x1c/0x210 [ 342.688476] do_syscall_64+0x5a/0x210 [ 342.693025] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 8d5d88527587 ("xdp: rhashtable with allocator ID to pointer mapping") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-13 09:21:58 +00:00
xa = rhashtable_lookup_fast(mem_id_ht, &id, mem_id_rht_params);
if (xa && !rhashtable_remove_fast(mem_id_ht, &xa->node, mem_id_rht_params))
call_rcu(&xa->rcu, __xdp_mem_allocator_rcu_free);
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
mutex_unlock(&mem_id_lock);
}
EXPORT_SYMBOL_GPL(xdp_rxq_info_unreg_mem_model);
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
void xdp_rxq_info_unreg(struct xdp_rxq_info *xdp_rxq)
{
/* Simplify driver cleanup code paths, allow unreg "unused" */
if (xdp_rxq->reg_state == REG_STATE_UNUSED)
return;
WARN(!(xdp_rxq->reg_state == REG_STATE_REGISTERED), "Driver BUG");
xdp_rxq_info_unreg_mem_model(xdp_rxq);
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
xdp_rxq->reg_state = REG_STATE_UNREGISTERED;
xdp_rxq->dev = NULL;
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
/* Reset mem info to defaults */
xdp_rxq->mem.id = 0;
xdp_rxq->mem.type = 0;
}
EXPORT_SYMBOL_GPL(xdp_rxq_info_unreg);
static void xdp_rxq_info_init(struct xdp_rxq_info *xdp_rxq)
{
memset(xdp_rxq, 0, sizeof(*xdp_rxq));
}
/* Returns 0 on success, negative on failure */
int xdp_rxq_info_reg(struct xdp_rxq_info *xdp_rxq,
struct net_device *dev, u32 queue_index)
{
if (xdp_rxq->reg_state == REG_STATE_UNUSED) {
WARN(1, "Driver promised not to register this");
return -EINVAL;
}
if (xdp_rxq->reg_state == REG_STATE_REGISTERED) {
WARN(1, "Missing unregister, handled but fix driver");
xdp_rxq_info_unreg(xdp_rxq);
}
if (!dev) {
WARN(1, "Missing net_device from driver");
return -ENODEV;
}
/* State either UNREGISTERED or NEW */
xdp_rxq_info_init(xdp_rxq);
xdp_rxq->dev = dev;
xdp_rxq->queue_index = queue_index;
xdp_rxq->reg_state = REG_STATE_REGISTERED;
return 0;
}
EXPORT_SYMBOL_GPL(xdp_rxq_info_reg);
void xdp_rxq_info_unused(struct xdp_rxq_info *xdp_rxq)
{
xdp_rxq->reg_state = REG_STATE_UNUSED;
}
EXPORT_SYMBOL_GPL(xdp_rxq_info_unused);
bool xdp_rxq_info_is_reg(struct xdp_rxq_info *xdp_rxq)
{
return (xdp_rxq->reg_state == REG_STATE_REGISTERED);
}
EXPORT_SYMBOL_GPL(xdp_rxq_info_is_reg);
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
static int __mem_id_init_hash_table(void)
{
struct rhashtable *rht;
int ret;
if (unlikely(mem_id_init))
return 0;
rht = kzalloc(sizeof(*rht), GFP_KERNEL);
if (!rht)
return -ENOMEM;
ret = rhashtable_init(rht, &mem_id_rht_params);
if (ret < 0) {
kfree(rht);
return ret;
}
mem_id_ht = rht;
smp_mb(); /* mutex lock should provide enough pairing */
mem_id_init = true;
return 0;
}
/* Allocate a cyclic ID that maps to allocator pointer.
* See: https://www.kernel.org/doc/html/latest/core-api/idr.html
*
* Caller must lock mem_id_lock.
*/
static int __mem_id_cyclic_get(gfp_t gfp)
{
int retries = 1;
int id;
again:
id = ida_simple_get(&mem_id_pool, mem_id_next, MEM_ID_MAX, gfp);
if (id < 0) {
if (id == -ENOSPC) {
/* Cyclic allocator, reset next id */
if (retries--) {
mem_id_next = MEM_ID_MIN;
goto again;
}
}
return id; /* errno */
}
mem_id_next = id + 1;
return id;
}
static bool __is_supported_mem_type(enum xdp_mem_type type)
{
if (type == MEM_TYPE_PAGE_POOL)
return is_page_pool_compiled_in();
if (type >= MEM_TYPE_MAX)
return false;
return true;
}
int xdp_rxq_info_reg_mem_model(struct xdp_rxq_info *xdp_rxq,
enum xdp_mem_type type, void *allocator)
{
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
struct xdp_mem_allocator *xdp_alloc;
gfp_t gfp = GFP_KERNEL;
int id, errno, ret;
void *ptr;
if (xdp_rxq->reg_state != REG_STATE_REGISTERED) {
WARN(1, "Missing register, driver bug");
return -EFAULT;
}
if (!__is_supported_mem_type(type))
return -EOPNOTSUPP;
xdp_rxq->mem.type = type;
if (!allocator) {
if (type == MEM_TYPE_PAGE_POOL || type == MEM_TYPE_ZERO_COPY)
return -EINVAL; /* Setup time check page_pool req */
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
return 0;
}
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
/* Delay init of rhashtable to save memory if feature isn't used */
if (!mem_id_init) {
mutex_lock(&mem_id_lock);
ret = __mem_id_init_hash_table();
mutex_unlock(&mem_id_lock);
if (ret < 0) {
WARN_ON(1);
return ret;
}
}
xdp_alloc = kzalloc(sizeof(*xdp_alloc), gfp);
if (!xdp_alloc)
return -ENOMEM;
mutex_lock(&mem_id_lock);
id = __mem_id_cyclic_get(gfp);
if (id < 0) {
errno = id;
goto err;
}
xdp_rxq->mem.id = id;
xdp_alloc->mem = xdp_rxq->mem;
xdp_alloc->allocator = allocator;
/* Insert allocator into ID lookup table */
ptr = rhashtable_insert_slow(mem_id_ht, &id, &xdp_alloc->node);
if (IS_ERR(ptr)) {
errno = PTR_ERR(ptr);
goto err;
}
mutex_unlock(&mem_id_lock);
return 0;
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
err:
mutex_unlock(&mem_id_lock);
kfree(xdp_alloc);
return errno;
}
EXPORT_SYMBOL_GPL(xdp_rxq_info_reg_mem_model);
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
/* XDP RX runs under NAPI protection, and in different delivery error
* scenarios (e.g. queue full), it is possible to return the xdp_frame
* while still leveraging this protection. The @napi_direct boolian
* is used for those calls sites. Thus, allowing for faster recycling
* of xdp_frames/pages in those cases.
*/
static void __xdp_return(void *data, struct xdp_mem_info *mem, bool napi_direct,
unsigned long handle)
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
{
struct xdp_mem_allocator *xa;
struct page *page;
switch (mem->type) {
case MEM_TYPE_PAGE_POOL:
rcu_read_lock();
/* mem->id is valid, checked in xdp_rxq_info_reg_mem_model() */
xa = rhashtable_lookup(mem_id_ht, &mem->id, mem_id_rht_params);
page = virt_to_head_page(data);
if (xa) {
napi_direct &= !xdp_return_frame_no_direct();
page_pool_put_page(xa->page_pool, page, napi_direct);
} else {
put_page(page);
}
rcu_read_unlock();
break;
case MEM_TYPE_PAGE_SHARED:
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
page_frag_free(data);
break;
case MEM_TYPE_PAGE_ORDER0:
page = virt_to_page(data); /* Assumes order0 page*/
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
put_page(page);
break;
case MEM_TYPE_ZERO_COPY:
/* NB! Only valid from an xdp_buff! */
rcu_read_lock();
/* mem->id is valid, checked in xdp_rxq_info_reg_mem_model() */
xa = rhashtable_lookup(mem_id_ht, &mem->id, mem_id_rht_params);
xa->zc_alloc->free(xa->zc_alloc, handle);
rcu_read_unlock();
default:
/* Not possible, checked in xdp_rxq_info_reg_mem_model() */
break;
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
}
}
void xdp_return_frame(struct xdp_frame *xdpf)
{
__xdp_return(xdpf->data, &xdpf->mem, false, 0);
}
xdp: rhashtable with allocator ID to pointer mapping Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which uses a radix tree, use a dynamic rhashtable, for creating ID to pointer lookup table, because this is faster. The problem that is being solved here is that, the xdp_rxq_info pointer (stored in xdp_buff) cannot be used directly, as the guaranteed lifetime is too short. The info is needed on a (potentially) remote CPU during DMA-TX completion time . In an xdp_frame the xdp_mem_info is stored, when it got converted from an xdp_buff, which is sufficient for the simple page refcnt based recycle schemes. For more advanced allocators there is a need to store a pointer to the registered allocator. Thus, there is a need to guard the lifetime or validity of the allocator pointer, which is done through this rhashtable ID map to pointer. The removal and validity of of the allocator and helper struct xdp_mem_allocator is guarded by RCU. The allocator will be created by the driver, and registered with xdp_rxq_info_reg_mem_model(). It is up-to debate who is responsible for freeing the allocator pointer or invoking the allocator destructor function. In any case, this must happen via RCU freeing. Use the IDA infrastructure for getting a cyclic increasing ID number, that is used for keeping track of each registered allocator per RX-queue xdp_rxq_info. V4: Per req of Jason Wang - Use xdp_rxq_info_reg_mem_model() in all drivers implementing XDP_REDIRECT, even-though it's not strictly necessary when allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero). V6: Per req of Alex Duyck - Introduce rhashtable_lookup() call in later patch V8: Address sparse should be static warnings (from kbuild test robot) Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:12 +00:00
EXPORT_SYMBOL_GPL(xdp_return_frame);
void xdp_return_frame_rx_napi(struct xdp_frame *xdpf)
{
__xdp_return(xdpf->data, &xdpf->mem, true, 0);
}
EXPORT_SYMBOL_GPL(xdp_return_frame_rx_napi);
void xdp_return_buff(struct xdp_buff *xdp)
{
__xdp_return(xdp->data, &xdp->rxq->mem, true, xdp->handle);
}
EXPORT_SYMBOL_GPL(xdp_return_buff);
int xdp_attachment_query(struct xdp_attachment_info *info,
struct netdev_bpf *bpf)
{
bpf->prog_id = info->prog ? info->prog->aux->id : 0;
bpf->prog_flags = info->prog ? info->flags : 0;
return 0;
}
EXPORT_SYMBOL_GPL(xdp_attachment_query);
bool xdp_attachment_flags_ok(struct xdp_attachment_info *info,
struct netdev_bpf *bpf)
{
if (info->prog && (bpf->flags ^ info->flags) & XDP_FLAGS_MODES) {
NL_SET_ERR_MSG(bpf->extack,
"program loaded with different flags");
return false;
}
return true;
}
EXPORT_SYMBOL_GPL(xdp_attachment_flags_ok);
void xdp_attachment_setup(struct xdp_attachment_info *info,
struct netdev_bpf *bpf)
{
if (info->prog)
bpf_prog_put(info->prog);
info->prog = bpf->prog;
info->flags = bpf->flags;
}
EXPORT_SYMBOL_GPL(xdp_attachment_setup);
struct xdp_frame *xdp_convert_zc_to_xdp_frame(struct xdp_buff *xdp)
{
unsigned int metasize, totsize;
void *addr, *data_to_copy;
struct xdp_frame *xdpf;
struct page *page;
/* Clone into a MEM_TYPE_PAGE_ORDER0 xdp_frame. */
metasize = xdp_data_meta_unsupported(xdp) ? 0 :
xdp->data - xdp->data_meta;
totsize = xdp->data_end - xdp->data + metasize;
if (sizeof(*xdpf) + totsize > PAGE_SIZE)
return NULL;
page = dev_alloc_page();
if (!page)
return NULL;
addr = page_to_virt(page);
xdpf = addr;
memset(xdpf, 0, sizeof(*xdpf));
addr += sizeof(*xdpf);
data_to_copy = metasize ? xdp->data_meta : xdp->data;
memcpy(addr, data_to_copy, totsize);
xdpf->data = addr + metasize;
xdpf->len = totsize - metasize;
xdpf->headroom = 0;
xdpf->metasize = metasize;
xdpf->mem.type = MEM_TYPE_PAGE_ORDER0;
xdp_return_buff(xdp);
return xdpf;
}
EXPORT_SYMBOL_GPL(xdp_convert_zc_to_xdp_frame);