linux/include/asm-arm/arch-sa1100/collie.h

/*
 * linux/include/asm-arm/arch-sa1100/collie.h
 *
 * This file contains the hardware specific definitions for Assabet
 * Only include this file from SA1100-specific files.
 *
 * ChangeLog:
 *   04-06-2001 Lineo Japan, Inc.
 *   04-16-2001 SHARP Corporation
 *   07-07-2002 Chris Larson <clarson@digi.com>
 *
 */
#ifndef __ASM_ARCH_COLLIE_H
#define __ASM_ARCH_COLLIE_H


#define COLLIE_SCP_CHARGE_ON	SCOOP_GPCR_PA11
#define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
#define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
#define COLLIE_SCP_MUTE_L	SCOOP_GPCR_PA14
#define COLLIE_SCP_MUTE_R	SCOOP_GPCR_PA15
#define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
#define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
#define COLLIE_SCP_VPEN		SCOOP_GPCR_PA18
#define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19

#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
				COLLIE_SCP_LB_VOL_CHG )
#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
				COLLIE_SCP_CHARGE_ON )

/* GPIOs for which the generic definition doesn't say much */

#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
#define COLLIE_GPIO_CO			GPIO_GPIO (20)
#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)

/* Interrupts */

#define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
#define COLLIE_IRQ_GPIO_AC_IN		IRQ_GPIO1
#define COLLIE_IRQ_GPIO_SDIO_IRQ	IRQ_GPIO11
#define COLLIE_IRQ_GPIO_CF_IRQ		IRQ_GPIO14
#define COLLIE_IRQ_GPIO_nREMOCON_INT	IRQ_GPIO15
#define COLLIE_IRQ_GPIO_CO		IRQ_GPIO20
#define COLLIE_IRQ_GPIO_CF_CD		IRQ_GPIO22
#define COLLIE_IRQ_GPIO_UCB1x00_IRQ	IRQ_GPIO23
#define COLLIE_IRQ_GPIO_WAKEUP		IRQ_GPIO24
#define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26

#define COLLIE_LCM_IRQ_GPIO_RTS		IRQ_LOCOMO_GPIO0
#define COLLIE_LCM_IRQ_GPIO_CTS		IRQ_LOCOMO_GPIO1
#define COLLIE_LCM_IRQ_GPIO_DSR		IRQ_LOCOMO_GPIO2
#define COLLIE_LCM_IRQ_GPIO_DTR		IRQ_LOCOMO_GPIO3
#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT	IRQ_LOCOMO_GPIO13
#define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14

/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )

#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 22:20:36 +00:00			`/*`
			`* linux/include/asm-arm/arch-sa1100/collie.h`
			`*`
			`* This file contains the hardware specific definitions for Assabet`
			`* Only include this file from SA1100-specific files.`
			`*`
			`* ChangeLog:`
			`* 04-06-2001 Lineo Japan, Inc.`
			`* 04-16-2001 SHARP Corporation`
			`* 07-07-2002 Chris Larson <clarson@digi.com>`
			`*`
			`*/`
			`#ifndef __ASM_ARCH_COLLIE_H`
			`#define __ASM_ARCH_COLLIE_H`


			`#define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11`
			`#define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12`
			`#define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13`
			`#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14`
			`#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15`
			`#define COLLIE_SCP_5VON SCOOP_GPCR_PA16`
			`#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17`
			`#define COLLIE_SCP_VPEN SCOOP_GPCR_PA18`
			`#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19`

			`#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON \| COLLIE_SCP_MUTE_L \| COLLIE_SCP_MUTE_R \| \`
			`COLLIE_SCP_5VON \| COLLIE_SCP_AMP_ON \| COLLIE_SCP_VPEN \| \`
			`COLLIE_SCP_LB_VOL_CHG )`
			`#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L \| COLLIE_SCP_MUTE_R \| COLLIE_SCP_VPEN \| \`
			`COLLIE_SCP_CHARGE_ON )`

			`/* GPIOs for which the generic definition doesn't say much */`

			`#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0)`
			`#define COLLIE_GPIO_AC_IN GPIO_GPIO (1)`
[ARM] 5025/2: fix collie cpu initialisation collie.h: * add some meaningfull names to some gpios collie.c: * initialize cpu registers correctly Signed-off-by: Thomas Kunze <thommycheck@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2008-05-19 21:06:51 +00:00			`#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11)`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 22:20:36 +00:00			`#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14)`
			`#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15)`
			`#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16)`
[ARM] 5025/2: fix collie cpu initialisation collie.h: * add some meaningfull names to some gpios collie.c: * initialize cpu registers correctly Signed-off-by: Thomas Kunze <thommycheck@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2008-05-19 21:06:51 +00:00			`#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17)`
			`#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18)`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 22:20:36 +00:00			`#define COLLIE_GPIO_CO GPIO_GPIO (20)`
			`#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21)`
			`#define COLLIE_GPIO_CF_CD GPIO_GPIO (22)`
			`#define COLLIE_GPIO_UCB1x00_IRQ GPIO_GPIO (23)`
			`#define COLLIE_GPIO_WAKEUP GPIO_GPIO (24)`
			`#define COLLIE_GPIO_GA_INT GPIO_GPIO (25)`
			`#define COLLIE_GPIO_MAIN_BAT_LOW GPIO_GPIO (26)`

			`/* Interrupts */`

			`#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0`
			`#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1`
[ARM] 5025/2: fix collie cpu initialisation collie.h: * add some meaningfull names to some gpios collie.c: * initialize cpu registers correctly Signed-off-by: Thomas Kunze <thommycheck@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2008-05-19 21:06:51 +00:00			`#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-16 22:20:36 +00:00			`#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14`
			`#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15`
			`#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20`
			`#define COLLIE_IRQ_GPIO_CF_CD IRQ_GPIO22`
			`#define COLLIE_IRQ_GPIO_UCB1x00_IRQ IRQ_GPIO23`
			`#define COLLIE_IRQ_GPIO_WAKEUP IRQ_GPIO24`
			`#define COLLIE_IRQ_GPIO_GA_INT IRQ_GPIO25`
			`#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO26`

			`#define COLLIE_LCM_IRQ_GPIO_RTS IRQ_LOCOMO_GPIO0`
			`#define COLLIE_LCM_IRQ_GPIO_CTS IRQ_LOCOMO_GPIO1`
			`#define COLLIE_LCM_IRQ_GPIO_DSR IRQ_LOCOMO_GPIO2`
			`#define COLLIE_LCM_IRQ_GPIO_DTR IRQ_LOCOMO_GPIO3`
			`#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT IRQ_LOCOMO_GPIO13`
			`#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14`

			`/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */`
			`#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 /* GPIO0=Version */`
			`#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 /* GPIO1=TBL_CHK */`
			`#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 /* GPIO2=VPNE_ON */`
			`#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 /* GPIO3=IR_ON */`
			`#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 /* GPIO4=AMP_ON */`
			`#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 /* GPIO5=Version */`
			`#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 /* GPIO5=fs 8k LPF */`
			`#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 /* GPIO6=BUZZER BIAS */`
			`#define COLLIE_TC35143_GPIO_MBAT_ON UCB_IO_7 /* GPIO7=MBAT_ON */`
			`#define COLLIE_TC35143_GPIO_BBAT_ON UCB_IO_8 /* GPIO8=BBAT_ON */`
			`#define COLLIE_TC35143_GPIO_TMP_ON UCB_IO_9 /* GPIO9=TMP_ON */`
			`#define COLLIE_TC35143_GPIO_IN ( UCB_IO_0 \| UCB_IO_2 \| UCB_IO_5 )`
			`#define COLLIE_TC35143_GPIO_OUT ( UCB_IO_1 \| UCB_IO_3 \| UCB_IO_4 \| UCB_IO_6 \| \`
			`UCB_IO_7 \| UCB_IO_8 \| UCB_IO_9 )`

			`#endif`