leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a08786568a
linux/arch/mips/lib/memset.S

181 lines
4.1 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1998, 1999, 2000 by Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
* Copyright (C) 2007 Maciej W. Rozycki
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
#include <asm/asm.h>
kbuild: mips use generic asm-offsets.h support Removed obsolete stuff from arch makefile. mips had a special rule for generating asm-offsets.h so preserved it using an architecture specific hook in top-level Kbuild file. Renamed .h file to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 20:32:31 +00:00
#include <asm/asm-offsets.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/regdef.h>
[MIPS] Unify memset.S The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, supporting CDEX, etc.) easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-17 15:07:40 +00:00
#if LONGSIZE == 4
#define LONG_S_L swl
#define LONG_S_R swr
#else
#define LONG_S_L sdl
#define LONG_S_R sdr
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#define EX(insn,reg,addr,handler) \
9: insn reg, addr; \
.section __ex_table,"a"; \
PTR 9b, handler; \
.previous
.macro f_fill64 dst, offset, val, fixup
EX(LONG_S, \val, (\offset + 0 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 1 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 2 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 3 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 4 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 5 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 6 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 7 * LONGSIZE)(\dst), \fixup)
[MIPS] Unify memset.S The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, supporting CDEX, etc.) easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-17 15:07:40 +00:00
#if LONGSIZE == 4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EX(LONG_S, \val, (\offset + 8 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 9 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 10 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 11 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 12 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 13 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 14 * LONGSIZE)(\dst), \fixup)
EX(LONG_S, \val, (\offset + 15 * LONGSIZE)(\dst), \fixup)
[MIPS] Unify memset.S The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, supporting CDEX, etc.) easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-17 15:07:40 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.endm
/*
* memset(void *s, int c, size_t n)
*
* a0: start of area to clear
* a1: char to fill with
* a2: size of area to clear
*/
.set noreorder
.align 5
LEAF(memset)
beqz a1, 1f
move v0, a0 /* result */
andi a1, 0xff /* spread fillword */
[MIPS] Unify memset.S The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, supporting CDEX, etc.) easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-17 15:07:40 +00:00
LONG_SLL t1, a1, 8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
or a1, t1
[MIPS] Unify memset.S The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, supporting CDEX, etc.) easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-17 15:07:40 +00:00
LONG_SLL t1, a1, 16
#if LONGSIZE == 8
or a1, t1
LONG_SLL t1, a1, 32
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
or a1, t1
1:
FEXPORT(__bzero)
sltiu t0, a2, LONGSIZE /* very small region? */
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
bnez t0, .Lsmall_memset
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
andi t0, a0, LONGMASK /* aligned? */
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
beqz t0, 1f
PTR_SUBU t0, LONGSIZE /* alignment in bytes */
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
#else
.set noat
li AT, LONGSIZE
beqz t0, 1f
PTR_SUBU t0, AT /* alignment in bytes */
.set at
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[MIPS] IP28: added cache barrier to assembly routines IP28 needs special treatment to avoid speculative accesses. gcc takes care for .c code, but for assembly code we need to do it manually. This is taken from Peter Fuersts IP28 patches. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-25 10:47:56 +00:00
R10KCBARRIER(0(ra))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef __MIPSEB__
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
EX(LONG_S_L, a1, (a0), .Lfirst_fixup) /* make word/dword aligned */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
#ifdef __MIPSEL__
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
EX(LONG_S_R, a1, (a0), .Lfirst_fixup) /* make word/dword aligned */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
PTR_SUBU a0, t0 /* long align ptr */
PTR_ADDU a2, t0 /* correct size */
1: ori t1, a2, 0x3f /* # of full blocks */
xori t1, 0x3f
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
beqz t1, .Lmemset_partial /* no block to fill */
[MIPS] Unify memset.S The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, supporting CDEX, etc.) easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-17 15:07:40 +00:00
andi t0, a2, 0x40-LONGSIZE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PTR_ADDU t1, a0 /* end address */
.set reorder
1: PTR_ADDIU a0, 64
[MIPS] IP28: added cache barrier to assembly routines IP28 needs special treatment to avoid speculative accesses. gcc takes care for .c code, but for assembly code we need to do it manually. This is taken from Peter Fuersts IP28 patches. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-25 10:47:56 +00:00
R10KCBARRIER(0(ra))
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
f_fill64 a0, -64, a1, .Lfwd_fixup
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
bne t1, a0, 1b
.set noreorder
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
.Lmemset_partial:
[MIPS] IP28: added cache barrier to assembly routines IP28 needs special treatment to avoid speculative accesses. gcc takes care for .c code, but for assembly code we need to do it manually. This is taken from Peter Fuersts IP28 patches. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-25 10:47:56 +00:00
R10KCBARRIER(0(ra))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PTR_LA t1, 2f /* where to start */
[MIPS] Unify memset.S The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, supporting CDEX, etc.) easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-17 15:07:40 +00:00
#if LONGSIZE == 4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PTR_SUBU t1, t0
[MIPS] Unify memset.S The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, supporting CDEX, etc.) easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-17 15:07:40 +00:00
#else
.set noat
LONG_SRL AT, t0, 1
PTR_SUBU t1, AT
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
.set at
[MIPS] Unify memset.S The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, supporting CDEX, etc.) easier. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-17 15:07:40 +00:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jr t1
PTR_ADDU a0, t0 /* dest ptr */
.set push
.set noreorder
.set nomacro
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
f_fill64 a0, -64, a1, .Lpartial_fixup /* ... but first do longs ... */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
2: .set pop
andi a2, LONGMASK /* At most one long to go */
beqz a2, 1f
PTR_ADDU a0, a2 /* What's left */
[MIPS] IP28: added cache barrier to assembly routines IP28 needs special treatment to avoid speculative accesses. gcc takes care for .c code, but for assembly code we need to do it manually. This is taken from Peter Fuersts IP28 patches. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-25 10:47:56 +00:00
R10KCBARRIER(0(ra))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef __MIPSEB__
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
EX(LONG_S_R, a1, -1(a0), .Llast_fixup)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
#ifdef __MIPSEL__
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
EX(LONG_S_L, a1, -1(a0), .Llast_fixup)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
1: jr ra
move a2, zero
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
.Lsmall_memset:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
beqz a2, 2f
PTR_ADDU t1, a0, a2
1: PTR_ADDIU a0, 1 /* fill bytewise */
[MIPS] IP28: added cache barrier to assembly routines IP28 needs special treatment to avoid speculative accesses. gcc takes care for .c code, but for assembly code we need to do it manually. This is taken from Peter Fuersts IP28 patches. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-25 10:47:56 +00:00
R10KCBARRIER(0(ra))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
bne t1, a0, 1b
sb a1, -1(a0)
2: jr ra /* done */
move a2, zero
END(memset)
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
.Lfirst_fixup:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jr ra
nop
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
.Lfwd_fixup:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PTR_L t0, TI_TASK($28)
LONG_L t0, THREAD_BUADDR(t0)
andi a2, 0x3f
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
.Lpartial_fixup:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
PTR_L t0, TI_TASK($28)
LONG_L t0, THREAD_BUADDR(t0)
andi a2, LONGMASK
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
[MIPS] Eleminate local symbols from the symbol table. These symbols appear in oprofile output, stacktraces and similar but only make the output harder to read. Many identical symbol names such as "both_aligned" were also being used in multiple source files making it impossible to see which file actually was meant. So let's get rid of them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
.Llast_fixup:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
jr ra
andi v1, a2, LONGMASK
Reference in New Issue Copy Permalink