linux/drivers/scsi/qla2xxx/qla_inline.h

369 lines
8.0 KiB
C
Raw Normal View History

/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2014 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#include "qla_target.h"
/**
* qla24xx_calc_iocbs() - Determine number of Command Type 3 and
* Continuation Type 1 IOCBs to allocate.
*
* @dsds: number of data segment decriptors needed
*
* Returns the number of IOCB entries needed to store @dsds.
*/
static inline uint16_t
qla24xx_calc_iocbs(scsi_qla_host_t *vha, uint16_t dsds)
{
uint16_t iocbs;
iocbs = 1;
if (dsds > 1) {
iocbs += (dsds - 1) / 5;
if ((dsds - 1) % 5)
iocbs++;
}
return iocbs;
}
/*
* qla2x00_debounce_register
* Debounce register.
*
* Input:
* port = register address.
*
* Returns:
* register value.
*/
static __inline__ uint16_t
qla2x00_debounce_register(volatile uint16_t __iomem *addr)
{
volatile uint16_t first;
volatile uint16_t second;
do {
first = RD_REG_WORD(addr);
barrier();
cpu_relax();
second = RD_REG_WORD(addr);
} while (first != second);
return (first);
}
static inline void
qla2x00_poll(struct rsp_que *rsp)
{
[SCSI] qla2xxx: Disable local-interrupts while polling for RISC status. Matthew Wilcox <matthew@wil.cx> reported the following lockdep warning: > ================================= > [INFO:inconsistentlockstate] > 2.6.26-rc1-00115-g0340eda-dirty#60 > --------------------------------- > inconsistent{hardirq-on-W}->{in-hardirq-W}usage. > swapper/1[HC1[1]:SC0[0]:HE0:SE1]takes: > (&ha->hardware_lock){+-..},at:[<c035495d>]qla2300_intr_handler+0x35/0x1f5 > {hardirq-on-W}statewasregisteredat: > [<c0139a16>]__lock_acquire+0x459/0xb1d > [<c013a091>]__lock_acquire+0xad4/0xb1d > [<c013a142>]lock_acquire+0x68/0x82 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c0506da5>]_spin_lock+0x24/0x4d > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c01391e4>]trace_hardirqs_on+0xe7/0x10e > [<c034f0a6>]qla2x00_mailbox_command+0x1c6/0x433 ... > other info that might help us debug this: > no locks held by swapper/1. > > stack backtrace: > Pid:1,comm:swapperNottainted2.6.26-rc1-00115-g0340eda-dirty#60 > [<c0138121>]print_usage_bug+0x100/0x10a > [<c0138d37>]mark_lock+0xaa/0x395 > [<c01399af>]__lock_acquire+0x3f2/0xb1d > [<c013a091>]__lock_acquire+0xad4/0xb1d > [<c013a142>]lock_acquire+0x68/0x82 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c0506da5>]_spin_lock+0x24/0x4d > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c014a37b>]handle_IRQ_event+0x13/0x3d > [<c014b366>]handle_fasteoi_irq+0x76/0xab Which shows that lockdep is detecting the driver's interrupt-handler is run in both process and interrupt context with irqs-enabled in the former case. During init-time and error-recovery (after a RISC reset), the driver disables interrupts and 'polls' for completions by calling qla2x00_poll(): static inline void qla2x00_poll(scsi_qla_host_t *ha) { ha->isp_ops->intr_handler(0, ha); } which in-turn calls the ISP registered interrupt handler. This patch corrects it by disabling local interrupts during polling. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-13 05:21:14 +00:00
unsigned long flags;
struct qla_hw_data *ha = rsp->hw;
[SCSI] qla2xxx: Disable local-interrupts while polling for RISC status. Matthew Wilcox <matthew@wil.cx> reported the following lockdep warning: > ================================= > [INFO:inconsistentlockstate] > 2.6.26-rc1-00115-g0340eda-dirty#60 > --------------------------------- > inconsistent{hardirq-on-W}->{in-hardirq-W}usage. > swapper/1[HC1[1]:SC0[0]:HE0:SE1]takes: > (&ha->hardware_lock){+-..},at:[<c035495d>]qla2300_intr_handler+0x35/0x1f5 > {hardirq-on-W}statewasregisteredat: > [<c0139a16>]__lock_acquire+0x459/0xb1d > [<c013a091>]__lock_acquire+0xad4/0xb1d > [<c013a142>]lock_acquire+0x68/0x82 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c0506da5>]_spin_lock+0x24/0x4d > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c01391e4>]trace_hardirqs_on+0xe7/0x10e > [<c034f0a6>]qla2x00_mailbox_command+0x1c6/0x433 ... > other info that might help us debug this: > no locks held by swapper/1. > > stack backtrace: > Pid:1,comm:swapperNottainted2.6.26-rc1-00115-g0340eda-dirty#60 > [<c0138121>]print_usage_bug+0x100/0x10a > [<c0138d37>]mark_lock+0xaa/0x395 > [<c01399af>]__lock_acquire+0x3f2/0xb1d > [<c013a091>]__lock_acquire+0xad4/0xb1d > [<c013a142>]lock_acquire+0x68/0x82 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c0506da5>]_spin_lock+0x24/0x4d > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c014a37b>]handle_IRQ_event+0x13/0x3d > [<c014b366>]handle_fasteoi_irq+0x76/0xab Which shows that lockdep is detecting the driver's interrupt-handler is run in both process and interrupt context with irqs-enabled in the former case. During init-time and error-recovery (after a RISC reset), the driver disables interrupts and 'polls' for completions by calling qla2x00_poll(): static inline void qla2x00_poll(scsi_qla_host_t *ha) { ha->isp_ops->intr_handler(0, ha); } which in-turn calls the ISP registered interrupt handler. This patch corrects it by disabling local interrupts during polling. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-13 05:21:14 +00:00
local_irq_save(flags);
if (IS_P3P_TYPE(ha))
qla82xx_poll(0, rsp);
else
ha->isp_ops->intr_handler(0, rsp);
[SCSI] qla2xxx: Disable local-interrupts while polling for RISC status. Matthew Wilcox <matthew@wil.cx> reported the following lockdep warning: > ================================= > [INFO:inconsistentlockstate] > 2.6.26-rc1-00115-g0340eda-dirty#60 > --------------------------------- > inconsistent{hardirq-on-W}->{in-hardirq-W}usage. > swapper/1[HC1[1]:SC0[0]:HE0:SE1]takes: > (&ha->hardware_lock){+-..},at:[<c035495d>]qla2300_intr_handler+0x35/0x1f5 > {hardirq-on-W}statewasregisteredat: > [<c0139a16>]__lock_acquire+0x459/0xb1d > [<c013a091>]__lock_acquire+0xad4/0xb1d > [<c013a142>]lock_acquire+0x68/0x82 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c0506da5>]_spin_lock+0x24/0x4d > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c01391e4>]trace_hardirqs_on+0xe7/0x10e > [<c034f0a6>]qla2x00_mailbox_command+0x1c6/0x433 ... > other info that might help us debug this: > no locks held by swapper/1. > > stack backtrace: > Pid:1,comm:swapperNottainted2.6.26-rc1-00115-g0340eda-dirty#60 > [<c0138121>]print_usage_bug+0x100/0x10a > [<c0138d37>]mark_lock+0xaa/0x395 > [<c01399af>]__lock_acquire+0x3f2/0xb1d > [<c013a091>]__lock_acquire+0xad4/0xb1d > [<c013a142>]lock_acquire+0x68/0x82 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c0506da5>]_spin_lock+0x24/0x4d > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c035495d>]qla2300_intr_handler+0x35/0x1f5 > [<c014a37b>]handle_IRQ_event+0x13/0x3d > [<c014b366>]handle_fasteoi_irq+0x76/0xab Which shows that lockdep is detecting the driver's interrupt-handler is run in both process and interrupt context with irqs-enabled in the former case. During init-time and error-recovery (after a RISC reset), the driver disables interrupts and 'polls' for completions by calling qla2x00_poll(): static inline void qla2x00_poll(scsi_qla_host_t *ha) { ha->isp_ops->intr_handler(0, ha); } which in-turn calls the ISP registered interrupt handler. This patch corrects it by disabling local interrupts during polling. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-13 05:21:14 +00:00
local_irq_restore(flags);
}
static inline uint8_t *
host_to_fcp_swap(uint8_t *fcp, uint32_t bsize)
{
uint32_t *ifcp = (uint32_t *) fcp;
uint32_t *ofcp = (uint32_t *) fcp;
uint32_t iter = bsize >> 2;
for (; iter ; iter--)
*ofcp++ = swab32(*ifcp++);
return fcp;
}
static inline void
host_to_adap(uint8_t *src, uint8_t *dst, uint32_t bsize)
{
uint32_t *isrc = (uint32_t *) src;
__le32 *odest = (__le32 *) dst;
uint32_t iter = bsize >> 2;
for ( ; iter--; isrc++)
*odest++ = cpu_to_le32(*isrc);
}
static inline void
qla2x00_set_reserved_loop_ids(struct qla_hw_data *ha)
{
int i;
if (IS_FWI2_CAPABLE(ha))
return;
for (i = 0; i < SNS_FIRST_LOOP_ID; i++)
set_bit(i, ha->loop_id_map);
set_bit(MANAGEMENT_SERVER, ha->loop_id_map);
set_bit(BROADCAST, ha->loop_id_map);
}
static inline int
qla2x00_is_reserved_id(scsi_qla_host_t *vha, uint16_t loop_id)
{
struct qla_hw_data *ha = vha->hw;
if (IS_FWI2_CAPABLE(ha))
return (loop_id > NPH_LAST_HANDLE);
return ((loop_id > ha->max_loop_id && loop_id < SNS_FIRST_LOOP_ID) ||
loop_id == MANAGEMENT_SERVER || loop_id == BROADCAST);
}
static inline void
qla2x00_clear_loop_id(fc_port_t *fcport) {
struct qla_hw_data *ha = fcport->vha->hw;
if (fcport->loop_id == FC_NO_LOOP_ID ||
qla2x00_is_reserved_id(fcport->vha, fcport->loop_id))
return;
clear_bit(fcport->loop_id, ha->loop_id_map);
fcport->loop_id = FC_NO_LOOP_ID;
}
static inline void
qla2x00_clean_dsd_pool(struct qla_hw_data *ha, struct crc_context *ctx)
{
struct dsd_dma *dsd, *tdsd;
/* clean up allocated prev pool */
list_for_each_entry_safe(dsd, tdsd, &ctx->dsd_list, list) {
dma_pool_free(ha->dl_dma_pool, dsd->dsd_addr,
dsd->dsd_list_dma);
list_del(&dsd->list);
kfree(dsd);
}
INIT_LIST_HEAD(&ctx->dsd_list);
}
static inline void
qla2x00_set_fcport_state(fc_port_t *fcport, int state)
{
int old_state;
old_state = atomic_read(&fcport->state);
atomic_set(&fcport->state, state);
/* Don't print state transitions during initial allocation of fcport */
if (old_state && old_state != state) {
ql_dbg(ql_dbg_disc, fcport->vha, 0x207d,
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
"FCPort %8phC state transitioned from %s to %s - "
"portid=%02x%02x%02x.\n", fcport->port_name,
port_state_str[old_state], port_state_str[state],
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
}
}
static inline int
qla2x00_hba_err_chk_enabled(srb_t *sp)
{
/*
* Uncomment when corresponding SCSI changes are done.
*
if (!sp->cmd->prot_chk)
return 0;
*
*/
switch (scsi_get_prot_op(GET_CMD_SP(sp))) {
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_WRITE_INSERT:
if (ql2xenablehba_err_chk >= 1)
return 1;
break;
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
if (ql2xenablehba_err_chk >= 2)
return 1;
break;
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
return 1;
}
return 0;
}
static inline int
qla2x00_reset_active(scsi_qla_host_t *vha)
{
scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev);
/* Test appropriate base-vha and vha flags. */
return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) ||
test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
}
static inline srb_t *
qla2xxx_get_qpair_sp(struct qla_qpair *qpair, fc_port_t *fcport, gfp_t flag)
{
srb_t *sp = NULL;
uint8_t bail;
QLA_QPAIR_MARK_BUSY(qpair, bail);
if (unlikely(bail))
return NULL;
sp = mempool_alloc(qpair->srb_mempool, flag);
if (!sp)
goto done;
memset(sp, 0, sizeof(*sp));
sp->fcport = fcport;
sp->iocbs = 1;
sp->vha = qpair->vha;
done:
if (!sp)
QLA_QPAIR_MARK_NOT_BUSY(qpair);
return sp;
}
static inline void
qla2xxx_rel_qpair_sp(struct qla_qpair *qpair, srb_t *sp)
{
mempool_free(sp, qpair->srb_mempool);
QLA_QPAIR_MARK_NOT_BUSY(qpair);
}
static inline srb_t *
qla2x00_get_sp(scsi_qla_host_t *vha, fc_port_t *fcport, gfp_t flag)
{
srb_t *sp = NULL;
uint8_t bail;
QLA_VHA_MARK_BUSY(vha, bail);
if (unlikely(bail))
return NULL;
sp = mempool_alloc(vha->hw->srb_mempool, flag);
if (!sp)
goto done;
memset(sp, 0, sizeof(*sp));
sp->fcport = fcport;
sp->cmd_type = TYPE_SRB;
sp->iocbs = 1;
qla2xxx: Add framework for async fabric discovery Currently code performs a full scan of the fabric for every RSCN. Its an expensive process in a noisy large SAN. This patch optimizes expensive fabric discovery process by scanning switch for the affected port when RSCN is received. Currently Initiator Mode code makes login/logout decision without knowledge of target mode. This causes driver and firmware to go out-of-sync. This framework synchronizes both initiator mode personality and target mode personality in making login/logout decision. This patch adds following capabilities in the driver - Send Notification Acknowledgement asynchronously. - Update session/fcport state asynchronously. - Create a session or fcport struct asynchronously. - Send GNL asynchronously. The command will ask FW to provide a list of FC Port entries FW knows about. - Send GPDB asynchronously. The command will ask FW to provide detail data of an FC Port FW knows about or perform ADISC to verify the state of the session. - Send GPNID asynchronously. The command will ask switch to provide WWPN for provided NPort ID. - Send GPSC asynchronously. The command will ask switch to provide registered port speed for provided WWPN. - Send GIDPN asynchronously. The command will ask the switch to provide Nport ID for provided WWPN. - In driver unload path, schedule all session for deletion and wait for deletion to complete before allowing driver unload to proceed. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> [ bvanassche: fixed spelling in patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-20 06:28:00 +00:00
sp->vha = vha;
done:
if (!sp)
QLA_VHA_MARK_NOT_BUSY(vha);
return sp;
}
static inline void
qla2x00_rel_sp(srb_t *sp)
{
QLA_VHA_MARK_NOT_BUSY(sp->vha);
mempool_free(sp, sp->vha->hw->srb_mempool);
}
static inline void
qla2x00_init_timer(srb_t *sp, unsigned long tmo)
{
timer_setup(&sp->u.iocb_cmd.timer, qla2x00_sp_timeout, 0);
sp->u.iocb_cmd.timer.expires = jiffies + tmo * HZ;
add_timer(&sp->u.iocb_cmd.timer);
sp->free = qla2x00_sp_free;
init_completion(&sp->comp);
if (IS_QLAFX00(sp->vha->hw) && (sp->type == SRB_FXIOCB_DCMD))
init_completion(&sp->u.iocb_cmd.u.fxiocb.fxiocb_comp);
if (sp->type == SRB_ELS_DCMD)
init_completion(&sp->u.iocb_cmd.u.els_logo.comp);
}
static inline int
qla2x00_gid_list_size(struct qla_hw_data *ha)
{
if (IS_QLAFX00(ha))
return sizeof(uint32_t) * 32;
else
return sizeof(struct gid_list_info) * ha->max_fibre_devices;
}
static inline void
qla2x00_handle_mbx_completion(struct qla_hw_data *ha, int status)
{
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
complete(&ha->mbx_intr_comp);
}
}
static inline void
qla2x00_set_retry_delay_timestamp(fc_port_t *fcport, uint16_t retry_delay)
{
if (retry_delay)
fcport->retry_delay_timestamp = jiffies +
(retry_delay * HZ / 10);
}
static inline bool
qla_is_exch_offld_enabled(struct scsi_qla_host *vha)
{
if (qla_ini_mode_enabled(vha) &&
(ql2xiniexchg > FW_DEF_EXCHANGES_CNT))
return true;
else if (qla_tgt_mode_enabled(vha) &&
(ql2xexchoffld > FW_DEF_EXCHANGES_CNT))
return true;
else if (qla_dual_mode_enabled(vha) &&
((ql2xiniexchg + ql2xexchoffld) > FW_DEF_EXCHANGES_CNT))
return true;
else
return false;
}
static inline void
qla_cpu_update(struct qla_qpair *qpair, uint16_t cpuid)
{
qpair->cpuid = cpuid;
if (!list_empty(&qpair->hints_list)) {
struct qla_qpair_hint *h;
list_for_each_entry(h, &qpair->hints_list, hint_elem)
h->cpuid = qpair->cpuid;
}
}
static inline struct qla_qpair_hint *
qla_qpair_to_hint(struct qla_tgt *tgt, struct qla_qpair *qpair)
{
struct qla_qpair_hint *h;
u16 i;
for (i = 0; i < tgt->ha->max_qpairs + 1; i++) {
h = &tgt->qphints[i];
if (h->qpair == qpair)
return h;
}
return NULL;
}
static inline void
qla_83xx_start_iocbs(struct qla_qpair *qpair)
{
struct req_que *req = qpair->req;
req->ring_index++;
if (req->ring_index == req->length) {
req->ring_index = 0;
req->ring_ptr = req->ring;
} else
req->ring_ptr++;
WRT_REG_DWORD(req->req_q_in, req->ring_index);
}