linux/drivers/gpio/gpio-dwapb.c

693 lines
17 KiB
C
Raw Normal View History

gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
/*
* Copyright (c) 2011 Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* All enquiries to support@picochip.com
*/
#include <linux/basic_mmio_gpio.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/platform_data/gpio-dwapb.h>
#include <linux/slab.h>
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
#define GPIO_SWPORTA_DR 0x00
#define GPIO_SWPORTA_DDR 0x04
#define GPIO_SWPORTB_DR 0x0c
#define GPIO_SWPORTB_DDR 0x10
#define GPIO_SWPORTC_DR 0x18
#define GPIO_SWPORTC_DDR 0x1c
#define GPIO_SWPORTD_DR 0x24
#define GPIO_SWPORTD_DDR 0x28
#define GPIO_INTEN 0x30
#define GPIO_INTMASK 0x34
#define GPIO_INTTYPE_LEVEL 0x38
#define GPIO_INT_POLARITY 0x3c
#define GPIO_INTSTATUS 0x40
#define GPIO_PORTA_DEBOUNCE 0x48
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
#define GPIO_PORTA_EOI 0x4c
#define GPIO_EXT_PORTA 0x50
#define GPIO_EXT_PORTB 0x54
#define GPIO_EXT_PORTC 0x58
#define GPIO_EXT_PORTD 0x5c
#define DWAPB_MAX_PORTS 4
#define GPIO_EXT_PORT_SIZE (GPIO_EXT_PORTB - GPIO_EXT_PORTA)
#define GPIO_SWPORT_DR_SIZE (GPIO_SWPORTB_DR - GPIO_SWPORTA_DR)
#define GPIO_SWPORT_DDR_SIZE (GPIO_SWPORTB_DDR - GPIO_SWPORTA_DDR)
struct dwapb_gpio;
#ifdef CONFIG_PM_SLEEP
/* Store GPIO context across system-wide suspend/resume transitions */
struct dwapb_context {
u32 data;
u32 dir;
u32 ext;
u32 int_en;
u32 int_mask;
u32 int_type;
u32 int_pol;
u32 int_deb;
};
#endif
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
struct dwapb_gpio_port {
struct bgpio_chip bgc;
bool is_registered;
struct dwapb_gpio *gpio;
#ifdef CONFIG_PM_SLEEP
struct dwapb_context *ctx;
#endif
unsigned int idx;
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
};
struct dwapb_gpio {
struct device *dev;
void __iomem *regs;
struct dwapb_gpio_port *ports;
unsigned int nr_ports;
struct irq_domain *domain;
};
static inline struct dwapb_gpio_port *
to_dwapb_gpio_port(struct bgpio_chip *bgc)
{
return container_of(bgc, struct dwapb_gpio_port, bgc);
}
static inline u32 dwapb_read(struct dwapb_gpio *gpio, unsigned int offset)
{
struct bgpio_chip *bgc = &gpio->ports[0].bgc;
void __iomem *reg_base = gpio->regs;
return bgc->read_reg(reg_base + offset);
}
static inline void dwapb_write(struct dwapb_gpio *gpio, unsigned int offset,
u32 val)
{
struct bgpio_chip *bgc = &gpio->ports[0].bgc;
void __iomem *reg_base = gpio->regs;
bgc->write_reg(reg_base + offset, val);
}
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
static int dwapb_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct bgpio_chip *bgc = to_bgpio_chip(gc);
struct dwapb_gpio_port *port = to_dwapb_gpio_port(bgc);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
struct dwapb_gpio *gpio = port->gpio;
return irq_find_mapping(gpio->domain, offset);
}
static void dwapb_toggle_trigger(struct dwapb_gpio *gpio, unsigned int offs)
{
u32 v = dwapb_read(gpio, GPIO_INT_POLARITY);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
if (gpio_get_value(gpio->ports[0].bgc.gc.base + offs))
v &= ~BIT(offs);
else
v |= BIT(offs);
dwapb_write(gpio, GPIO_INT_POLARITY, v);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
}
static u32 dwapb_do_irq(struct dwapb_gpio *gpio)
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
{
u32 irq_status = readl_relaxed(gpio->regs + GPIO_INTSTATUS);
u32 ret = irq_status;
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
while (irq_status) {
int hwirq = fls(irq_status) - 1;
int gpio_irq = irq_find_mapping(gpio->domain, hwirq);
generic_handle_irq(gpio_irq);
irq_status &= ~BIT(hwirq);
if ((irq_get_trigger_type(gpio_irq) & IRQ_TYPE_SENSE_MASK)
== IRQ_TYPE_EDGE_BOTH)
dwapb_toggle_trigger(gpio, hwirq);
}
return ret;
}
static void dwapb_irq_handler(struct irq_desc *desc)
{
struct dwapb_gpio *gpio = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
dwapb_do_irq(gpio);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
if (chip->irq_eoi)
chip->irq_eoi(irq_desc_get_irq_data(desc));
}
static void dwapb_irq_enable(struct irq_data *d)
{
struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d);
struct dwapb_gpio *gpio = igc->private;
struct bgpio_chip *bgc = &gpio->ports[0].bgc;
unsigned long flags;
u32 val;
spin_lock_irqsave(&bgc->lock, flags);
val = dwapb_read(gpio, GPIO_INTEN);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
val |= BIT(d->hwirq);
dwapb_write(gpio, GPIO_INTEN, val);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
spin_unlock_irqrestore(&bgc->lock, flags);
}
static void dwapb_irq_disable(struct irq_data *d)
{
struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d);
struct dwapb_gpio *gpio = igc->private;
struct bgpio_chip *bgc = &gpio->ports[0].bgc;
unsigned long flags;
u32 val;
spin_lock_irqsave(&bgc->lock, flags);
val = dwapb_read(gpio, GPIO_INTEN);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
val &= ~BIT(d->hwirq);
dwapb_write(gpio, GPIO_INTEN, val);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
spin_unlock_irqrestore(&bgc->lock, flags);
}
static int dwapb_irq_reqres(struct irq_data *d)
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
{
struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d);
struct dwapb_gpio *gpio = igc->private;
struct bgpio_chip *bgc = &gpio->ports[0].bgc;
if (gpiochip_lock_as_irq(&bgc->gc, irqd_to_hwirq(d))) {
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
dev_err(gpio->dev, "unable to lock HW IRQ %lu for IRQ\n",
irqd_to_hwirq(d));
return -EINVAL;
}
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
return 0;
}
static void dwapb_irq_relres(struct irq_data *d)
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
{
struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d);
struct dwapb_gpio *gpio = igc->private;
struct bgpio_chip *bgc = &gpio->ports[0].bgc;
gpiochip_unlock_as_irq(&bgc->gc, irqd_to_hwirq(d));
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
}
static int dwapb_irq_set_type(struct irq_data *d, u32 type)
{
struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d);
struct dwapb_gpio *gpio = igc->private;
struct bgpio_chip *bgc = &gpio->ports[0].bgc;
int bit = d->hwirq;
unsigned long level, polarity, flags;
if (type & ~(IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
return -EINVAL;
spin_lock_irqsave(&bgc->lock, flags);
level = dwapb_read(gpio, GPIO_INTTYPE_LEVEL);
polarity = dwapb_read(gpio, GPIO_INT_POLARITY);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
level |= BIT(bit);
dwapb_toggle_trigger(gpio, bit);
break;
case IRQ_TYPE_EDGE_RISING:
level |= BIT(bit);
polarity |= BIT(bit);
break;
case IRQ_TYPE_EDGE_FALLING:
level |= BIT(bit);
polarity &= ~BIT(bit);
break;
case IRQ_TYPE_LEVEL_HIGH:
level &= ~BIT(bit);
polarity |= BIT(bit);
break;
case IRQ_TYPE_LEVEL_LOW:
level &= ~BIT(bit);
polarity &= ~BIT(bit);
break;
}
irq_setup_alt_chip(d, type);
dwapb_write(gpio, GPIO_INTTYPE_LEVEL, level);
dwapb_write(gpio, GPIO_INT_POLARITY, polarity);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
spin_unlock_irqrestore(&bgc->lock, flags);
return 0;
}
static int dwapb_gpio_set_debounce(struct gpio_chip *gc,
unsigned offset, unsigned debounce)
{
struct bgpio_chip *bgc = to_bgpio_chip(gc);
struct dwapb_gpio_port *port = to_dwapb_gpio_port(bgc);
struct dwapb_gpio *gpio = port->gpio;
unsigned long flags, val_deb;
unsigned long mask = bgc->pin2mask(bgc, offset);
spin_lock_irqsave(&bgc->lock, flags);
val_deb = dwapb_read(gpio, GPIO_PORTA_DEBOUNCE);
if (debounce)
dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, val_deb | mask);
else
dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, val_deb & ~mask);
spin_unlock_irqrestore(&bgc->lock, flags);
return 0;
}
static irqreturn_t dwapb_irq_handler_mfd(int irq, void *dev_id)
{
u32 worked;
struct dwapb_gpio *gpio = dev_id;
worked = dwapb_do_irq(gpio);
return worked ? IRQ_HANDLED : IRQ_NONE;
}
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
struct dwapb_gpio_port *port,
struct dwapb_port_property *pp)
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
{
struct gpio_chip *gc = &port->bgc.gc;
struct device_node *node = pp->node;
struct irq_chip_generic *irq_gc = NULL;
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
unsigned int hwirq, ngpio = gc->ngpio;
struct irq_chip_type *ct;
int err, i;
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
gpio->domain = irq_domain_add_linear(node, ngpio,
&irq_generic_chip_ops, gpio);
if (!gpio->domain)
return;
err = irq_alloc_domain_generic_chips(gpio->domain, ngpio, 2,
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
"gpio-dwapb", handle_level_irq,
IRQ_NOREQUEST, 0,
IRQ_GC_INIT_NESTED_LOCK);
if (err) {
dev_info(gpio->dev, "irq_alloc_domain_generic_chips failed\n");
irq_domain_remove(gpio->domain);
gpio->domain = NULL;
return;
}
irq_gc = irq_get_domain_generic_chip(gpio->domain, 0);
if (!irq_gc) {
irq_domain_remove(gpio->domain);
gpio->domain = NULL;
return;
}
irq_gc->reg_base = gpio->regs;
irq_gc->private = gpio;
for (i = 0; i < 2; i++) {
ct = &irq_gc->chip_types[i];
ct->chip.irq_ack = irq_gc_ack_set_bit;
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->chip.irq_set_type = dwapb_irq_set_type;
ct->chip.irq_enable = dwapb_irq_enable;
ct->chip.irq_disable = dwapb_irq_disable;
ct->chip.irq_request_resources = dwapb_irq_reqres;
ct->chip.irq_release_resources = dwapb_irq_relres;
ct->regs.ack = GPIO_PORTA_EOI;
ct->regs.mask = GPIO_INTMASK;
ct->type = IRQ_TYPE_LEVEL_MASK;
}
irq_gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK;
irq_gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH;
irq_gc->chip_types[1].handler = handle_edge_irq;
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
if (!pp->irq_shared) {
irq_set_chained_handler_and_data(pp->irq, dwapb_irq_handler,
gpio);
} else {
/*
* Request a shared IRQ since where MFD would have devices
* using the same irq pin
*/
err = devm_request_irq(gpio->dev, pp->irq,
dwapb_irq_handler_mfd,
IRQF_SHARED, "gpio-dwapb-mfd", gpio);
if (err) {
dev_err(gpio->dev, "error requesting IRQ\n");
irq_domain_remove(gpio->domain);
gpio->domain = NULL;
return;
}
}
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
for (hwirq = 0 ; hwirq < ngpio ; hwirq++)
irq_create_mapping(gpio->domain, hwirq);
port->bgc.gc.to_irq = dwapb_gpio_to_irq;
}
static void dwapb_irq_teardown(struct dwapb_gpio *gpio)
{
struct dwapb_gpio_port *port = &gpio->ports[0];
struct gpio_chip *gc = &port->bgc.gc;
unsigned int ngpio = gc->ngpio;
irq_hw_number_t hwirq;
if (!gpio->domain)
return;
for (hwirq = 0 ; hwirq < ngpio ; hwirq++)
irq_dispose_mapping(irq_find_mapping(gpio->domain, hwirq));
irq_domain_remove(gpio->domain);
gpio->domain = NULL;
}
static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
struct dwapb_port_property *pp,
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
unsigned int offs)
{
struct dwapb_gpio_port *port;
void __iomem *dat, *set, *dirout;
int err;
port = &gpio->ports[offs];
port->gpio = gpio;
port->idx = pp->idx;
#ifdef CONFIG_PM_SLEEP
port->ctx = devm_kzalloc(gpio->dev, sizeof(*port->ctx), GFP_KERNEL);
if (!port->ctx)
return -ENOMEM;
#endif
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
dat = gpio->regs + GPIO_EXT_PORTA + (pp->idx * GPIO_EXT_PORT_SIZE);
set = gpio->regs + GPIO_SWPORTA_DR + (pp->idx * GPIO_SWPORT_DR_SIZE);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
dirout = gpio->regs + GPIO_SWPORTA_DDR +
(pp->idx * GPIO_SWPORT_DDR_SIZE);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
err = bgpio_init(&port->bgc, gpio->dev, 4, dat, set, NULL, dirout,
NULL, false);
if (err) {
dev_err(gpio->dev, "failed to init gpio chip for %s\n",
pp->name);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
return err;
}
#ifdef CONFIG_OF_GPIO
port->bgc.gc.of_node = pp->node;
#endif
port->bgc.gc.ngpio = pp->ngpio;
port->bgc.gc.base = pp->gpio_base;
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
/* Only port A support debounce */
if (pp->idx == 0)
port->bgc.gc.set_debounce = dwapb_gpio_set_debounce;
if (pp->irq)
dwapb_configure_irqs(gpio, port, pp);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
err = gpiochip_add(&port->bgc.gc);
if (err)
dev_err(gpio->dev, "failed to register gpiochip for %s\n",
pp->name);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
else
port->is_registered = true;
return err;
}
static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
{
unsigned int m;
for (m = 0; m < gpio->nr_ports; ++m)
if (gpio->ports[m].is_registered)
gpiochip_remove(&gpio->ports[m].bgc.gc);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
}
static struct dwapb_platform_data *
dwapb_gpio_get_pdata_of(struct device *dev)
{
struct device_node *node, *port_np;
struct dwapb_platform_data *pdata;
struct dwapb_port_property *pp;
int nports;
int i;
node = dev->of_node;
if (!IS_ENABLED(CONFIG_OF_GPIO) || !node)
return ERR_PTR(-ENODEV);
nports = of_get_child_count(node);
if (nports == 0)
return ERR_PTR(-ENODEV);
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return ERR_PTR(-ENOMEM);
pdata->properties = devm_kcalloc(dev, nports, sizeof(*pp), GFP_KERNEL);
if (!pdata->properties)
return ERR_PTR(-ENOMEM);
pdata->nports = nports;
i = 0;
for_each_child_of_node(node, port_np) {
pp = &pdata->properties[i++];
pp->node = port_np;
if (of_property_read_u32(port_np, "reg", &pp->idx) ||
pp->idx >= DWAPB_MAX_PORTS) {
dev_err(dev, "missing/invalid port index for %s\n",
port_np->full_name);
return ERR_PTR(-EINVAL);
}
if (of_property_read_u32(port_np, "snps,nr-gpios",
&pp->ngpio)) {
dev_info(dev, "failed to get number of gpios for %s\n",
port_np->full_name);
pp->ngpio = 32;
}
/*
* Only port A can provide interrupts in all configurations of
* the IP.
*/
if (pp->idx == 0 &&
of_property_read_bool(port_np, "interrupt-controller")) {
pp->irq = irq_of_parse_and_map(port_np, 0);
if (!pp->irq) {
dev_warn(dev, "no irq for bank %s\n",
port_np->full_name);
}
}
pp->irq_shared = false;
pp->gpio_base = -1;
pp->name = port_np->full_name;
}
return pdata;
}
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
static int dwapb_gpio_probe(struct platform_device *pdev)
{
unsigned int i;
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
struct resource *res;
struct dwapb_gpio *gpio;
int err;
struct device *dev = &pdev->dev;
struct dwapb_platform_data *pdata = dev_get_platdata(dev);
if (!pdata) {
pdata = dwapb_gpio_get_pdata_of(dev);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
}
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
if (!pdata->nports)
return -ENODEV;
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
if (!gpio)
return -ENOMEM;
gpio->dev = &pdev->dev;
gpio->nr_ports = pdata->nports;
gpio->ports = devm_kcalloc(&pdev->dev, gpio->nr_ports,
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
sizeof(*gpio->ports), GFP_KERNEL);
if (!gpio->ports)
return -ENOMEM;
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
gpio->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(gpio->regs))
return PTR_ERR(gpio->regs);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
for (i = 0; i < gpio->nr_ports; i++) {
err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
if (err)
goto out_unregister;
}
platform_set_drvdata(pdev, gpio);
return 0;
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
out_unregister:
dwapb_gpio_unregister(gpio);
dwapb_irq_teardown(gpio);
return err;
}
static int dwapb_gpio_remove(struct platform_device *pdev)
{
struct dwapb_gpio *gpio = platform_get_drvdata(pdev);
dwapb_gpio_unregister(gpio);
dwapb_irq_teardown(gpio);
return 0;
}
static const struct of_device_id dwapb_of_match[] = {
{ .compatible = "snps,dw-apb-gpio" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dwapb_of_match);
#ifdef CONFIG_PM_SLEEP
static int dwapb_gpio_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct dwapb_gpio *gpio = platform_get_drvdata(pdev);
struct bgpio_chip *bgc = &gpio->ports[0].bgc;
unsigned long flags;
int i;
spin_lock_irqsave(&bgc->lock, flags);
for (i = 0; i < gpio->nr_ports; i++) {
unsigned int offset;
unsigned int idx = gpio->ports[i].idx;
struct dwapb_context *ctx = gpio->ports[i].ctx;
BUG_ON(!ctx);
offset = GPIO_SWPORTA_DDR + idx * GPIO_SWPORT_DDR_SIZE;
ctx->dir = dwapb_read(gpio, offset);
offset = GPIO_SWPORTA_DR + idx * GPIO_SWPORT_DR_SIZE;
ctx->data = dwapb_read(gpio, offset);
offset = GPIO_EXT_PORTA + idx * GPIO_EXT_PORT_SIZE;
ctx->ext = dwapb_read(gpio, offset);
/* Only port A can provide interrupts */
if (idx == 0) {
ctx->int_mask = dwapb_read(gpio, GPIO_INTMASK);
ctx->int_en = dwapb_read(gpio, GPIO_INTEN);
ctx->int_pol = dwapb_read(gpio, GPIO_INT_POLARITY);
ctx->int_type = dwapb_read(gpio, GPIO_INTTYPE_LEVEL);
ctx->int_deb = dwapb_read(gpio, GPIO_PORTA_DEBOUNCE);
/* Mask out interrupts */
dwapb_write(gpio, GPIO_INTMASK, 0xffffffff);
}
}
spin_unlock_irqrestore(&bgc->lock, flags);
return 0;
}
static int dwapb_gpio_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct dwapb_gpio *gpio = platform_get_drvdata(pdev);
struct bgpio_chip *bgc = &gpio->ports[0].bgc;
unsigned long flags;
int i;
spin_lock_irqsave(&bgc->lock, flags);
for (i = 0; i < gpio->nr_ports; i++) {
unsigned int offset;
unsigned int idx = gpio->ports[i].idx;
struct dwapb_context *ctx = gpio->ports[i].ctx;
BUG_ON(!ctx);
offset = GPIO_SWPORTA_DR + idx * GPIO_SWPORT_DR_SIZE;
dwapb_write(gpio, offset, ctx->data);
offset = GPIO_SWPORTA_DDR + idx * GPIO_SWPORT_DDR_SIZE;
dwapb_write(gpio, offset, ctx->dir);
offset = GPIO_EXT_PORTA + idx * GPIO_EXT_PORT_SIZE;
dwapb_write(gpio, offset, ctx->ext);
/* Only port A can provide interrupts */
if (idx == 0) {
dwapb_write(gpio, GPIO_INTTYPE_LEVEL, ctx->int_type);
dwapb_write(gpio, GPIO_INT_POLARITY, ctx->int_pol);
dwapb_write(gpio, GPIO_PORTA_DEBOUNCE, ctx->int_deb);
dwapb_write(gpio, GPIO_INTEN, ctx->int_en);
dwapb_write(gpio, GPIO_INTMASK, ctx->int_mask);
/* Clear out spurious interrupts */
dwapb_write(gpio, GPIO_PORTA_EOI, 0xffffffff);
}
}
spin_unlock_irqrestore(&bgc->lock, flags);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(dwapb_gpio_pm_ops, dwapb_gpio_suspend,
dwapb_gpio_resume);
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
static struct platform_driver dwapb_gpio_driver = {
.driver = {
.name = "gpio-dwapb",
.pm = &dwapb_gpio_pm_ops,
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 23:01:01 +00:00
.of_match_table = of_match_ptr(dwapb_of_match),
},
.probe = dwapb_gpio_probe,
.remove = dwapb_gpio_remove,
};
module_platform_driver(dwapb_gpio_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jamie Iles");
MODULE_DESCRIPTION("Synopsys DesignWare APB GPIO driver");