forked from Minki/linux
119 lines
2.3 KiB
ReStructuredText
119 lines
2.3 KiB
ReStructuredText
|
.. SPDX-License-Identifier: GPL-2.0
|
||
|
|
|
||
|
|
Kernel driver xdpe152
|
||
|
|
=====================
|
||
|
|
|
||
|
|
Supported chips:
|
||
|
|
|
||
|
|
* Infineon XDPE152C4
|
||
|
|
|
||
|
|
Prefix: 'xdpe152c4'
|
||
|
|
|
||
|
|
* Infineon XDPE15284
|
||
|
|
|
||
|
|
Prefix: 'xdpe15284'
|
||
|
|
|
||
|
|
Authors:
|
||
|
|
|
||
|
|
Greg Schwendimann <greg.schwendimann@infineon.com>
|
||
|
|
|
||
|
|
Description
|
||
|
|
-----------
|
||
|
|
|
||
|
|
This driver implements support for Infineon Digital Multi-phase Controller
|
||
|
|
XDPE152C4 and XDPE15284 dual loop voltage regulators.
|
||
|
|
The devices are compliant with:
|
||
|
|
|
||
|
|
- Intel VR13, VR13HC and VR14 rev 1.86
|
||
|
|
converter specification.
|
||
|
|
- Intel SVID rev 1.93. protocol.
|
||
|
|
- PMBus rev 1.3.1 interface.
|
||
|
|
|
||
|
|
Devices support linear format for reading input and output voltage, input
|
||
|
|
and output current, input and output power and temperature.
|
||
|
|
|
||
|
|
Devices support two pages for telemetry.
|
||
|
|
|
||
|
|
The driver provides for current: input, maximum and critical thresholds
|
||
|
|
and maximum and critical alarms. Low Critical thresholds and Low critical alarm are
|
||
|
|
supported only for current output.
|
||
|
|
The driver exports the following attributes for via the sysfs files, where
|
||
|
|
indexes 1, 2 are for "iin" and 3, 4 for "iout":
|
||
|
|
|
||
|
|
**curr[1-4]_crit**
|
||
|
|
|
||
|
|
**curr[1-4]_crit_alarm**
|
||
|
|
|
||
|
|
**curr[1-4]_input**
|
||
|
|
|
||
|
|
**curr[1-4]_label**
|
||
|
|
|
||
|
|
**curr[1-4]_max**
|
||
|
|
|
||
|
|
**curr[1-4]_max_alarm**
|
||
|
|
|
||
|
|
**curr[3-4]_lcrit**
|
||
|
|
|
||
|
|
**curr[3-4]_lcrit_alarm**
|
||
|
|
|
||
|
|
**curr[3-4]_rated_max**
|
||
|
|
|
||
|
|
The driver provides for voltage: input, critical and low critical thresholds
|
||
|
|
and critical and low critical alarms.
|
||
|
|
The driver exports the following attributes for via the sysfs files, where
|
||
|
|
indexes 1, 2 are for "vin" and 3, 4 for "vout":
|
||
|
|
|
||
|
|
**in[1-4]_min**
|
||
|
|
|
||
|
|
**in[1-4]_crit**
|
||
|
|
|
||
|
|
**in[1-4_crit_alarm**
|
||
|
|
|
||
|
|
**in[1-4]_input**
|
||
|
|
|
||
|
|
**in[1-4]_label**
|
||
|
|
|
||
|
|
**in[1-4]_max**
|
||
|
|
|
||
|
|
**in[1-4]_max_alarm**
|
||
|
|
|
||
|
|
**in[1-4]_min**
|
||
|
|
|
||
|
|
**in[1-4]_min_alarm**
|
||
|
|
|
||
|
|
**in[3-4]_lcrit**
|
||
|
|
|
||
|
|
**in[3-4]_lcrit_alarm**
|
||
|
|
|
||
|
|
**in[3-4]_rated_max**
|
||
|
|
|
||
|
|
**in[3-4]_rated_min**
|
||
|
|
|
||
|
|
The driver provides for power: input and alarms.
|
||
|
|
The driver exports the following attributes for via the sysfs files, where
|
||
|
|
indexes 1, 2 are for "pin" and 3, 4 for "pout":
|
||
|
|
|
||
|
|
**power[1-2]_alarm**
|
||
|
|
|
||
|
|
**power[1-4]_input**
|
||
|
|
|
||
|
|
**power[1-4]_label**
|
||
|
|
|
||
|
|
**power[1-4]_max**
|
||
|
|
|
||
|
|
**power[1-4]_rated_max**
|
||
|
|
|
||
|
|
The driver provides for temperature: input, maximum and critical thresholds
|
||
|
|
and maximum and critical alarms.
|
||
|
|
The driver exports the following attributes for via the sysfs files:
|
||
|
|
|
||
|
|
**temp[1-2]_crit**
|
||
|
|
|
||
|
|
**temp[1-2]_crit_alarm**
|
||
|
|
|
||
|
|
**temp[1-2]_input**
|
||
|
|
|
||
|
|
**temp[1-2]_max**
|
||
|
|
|
||
|
|
**temp[1-2]_max_alarm**
|