linux/net/mpls/mpls_iptunnel.c

298 lines
7.6 KiB
C
Raw Normal View History

/*
* mpls tunnels An implementation mpls tunnels using the light weight tunnel
* infrastructure
*
* Authors: Roopa Prabhu, <roopa@cumulusnetworks.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/net.h>
#include <linux/module.h>
#include <linux/mpls.h>
#include <linux/vmalloc.h>
#include <net/ip.h>
#include <net/dst.h>
#include <net/lwtunnel.h>
#include <net/netevent.h>
#include <net/netns/generic.h>
#include <net/ip6_fib.h>
#include <net/route.h>
#include <net/mpls_iptunnel.h>
#include <linux/mpls_iptunnel.h>
#include "internal.h"
static const struct nla_policy mpls_iptunnel_policy[MPLS_IPTUNNEL_MAX + 1] = {
[MPLS_IPTUNNEL_DST] = { .type = NLA_U32 },
[MPLS_IPTUNNEL_TTL] = { .type = NLA_U8 },
};
static unsigned int mpls_encap_size(struct mpls_iptunnel_encap *en)
{
/* The size of the layer 2.5 labels to be added for this route */
return en->labels * sizeof(struct mpls_shim_hdr);
}
static int mpls_xmit(struct sk_buff *skb)
{
struct mpls_iptunnel_encap *tun_encap_info;
struct mpls_shim_hdr *hdr;
struct net_device *out_dev;
unsigned int hh_len;
unsigned int new_header_size;
unsigned int mtu;
struct dst_entry *dst = skb_dst(skb);
struct rtable *rt = NULL;
struct rt6_info *rt6 = NULL;
struct mpls_dev *out_mdev;
struct net *net;
int err = 0;
bool bos;
int i;
unsigned int ttl;
/* Find the output device */
out_dev = dst->dev;
net = dev_net(out_dev);
skb_orphan(skb);
if (!mpls_output_possible(out_dev) ||
!dst->lwtstate || skb_warn_if_lro(skb))
goto drop;
skb_forward_csum(skb);
tun_encap_info = mpls_lwtunnel_encap(dst->lwtstate);
/* Obtain the ttl using the following set of rules.
*
* LWT ttl propagation setting:
* - disabled => use default TTL value from LWT
* - enabled => use TTL value from IPv4/IPv6 header
* - default =>
* Global ttl propagation setting:
* - disabled => use default TTL value from global setting
* - enabled => use TTL value from IPv4/IPv6 header
*/
if (dst->ops->family == AF_INET) {
if (tun_encap_info->ttl_propagate == MPLS_TTL_PROP_DISABLED)
ttl = tun_encap_info->default_ttl;
else if (tun_encap_info->ttl_propagate == MPLS_TTL_PROP_DEFAULT &&
!net->mpls.ip_ttl_propagate)
ttl = net->mpls.default_ttl;
else
ttl = ip_hdr(skb)->ttl;
rt = (struct rtable *)dst;
} else if (dst->ops->family == AF_INET6) {
if (tun_encap_info->ttl_propagate == MPLS_TTL_PROP_DISABLED)
ttl = tun_encap_info->default_ttl;
else if (tun_encap_info->ttl_propagate == MPLS_TTL_PROP_DEFAULT &&
!net->mpls.ip_ttl_propagate)
ttl = net->mpls.default_ttl;
else
ttl = ipv6_hdr(skb)->hop_limit;
rt6 = (struct rt6_info *)dst;
} else {
goto drop;
}
/* Verify the destination can hold the packet */
new_header_size = mpls_encap_size(tun_encap_info);
mtu = mpls_dev_mtu(out_dev);
if (mpls_pkt_too_big(skb, mtu - new_header_size))
goto drop;
hh_len = LL_RESERVED_SPACE(out_dev);
if (!out_dev->header_ops)
hh_len = 0;
/* Ensure there is enough space for the headers in the skb */
if (skb_cow(skb, hh_len + new_header_size))
goto drop;
net: mpls: Fixups for GSO As reported by Lennert the MPLS GSO code is failing to properly segment large packets. There are a couple of problems: 1. the inner protocol is not set so the gso segment functions for inner protocol layers are not getting run, and 2 MPLS labels for packets that use the "native" (non-OVS) MPLS code are not properly accounted for in mpls_gso_segment. The MPLS GSO code was added for OVS. It is re-using skb_mac_gso_segment to call the gso segment functions for the higher layer protocols. That means skb_mac_gso_segment is called twice -- once with the network protocol set to MPLS and again with the network protocol set to the inner protocol. This patch sets the inner skb protocol addressing item 1 above and sets the network_header and inner_network_header to mark where the MPLS labels start and end. The MPLS code in OVS is also updated to set the two network markers. >From there the MPLS GSO code uses the difference between the network header and the inner network header to know the size of the MPLS header that was pushed. It then pulls the MPLS header, resets the mac_len and protocol for the inner protocol and then calls skb_mac_gso_segment to segment the skb. Afterward the inner protocol segmentation is done the skb protocol is set to mpls for each segment and the network and mac headers restored. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-25 03:10:44 +00:00
skb_set_inner_protocol(skb, skb->protocol);
skb_reset_inner_network_header(skb);
skb_push(skb, new_header_size);
net: mpls: Fixups for GSO As reported by Lennert the MPLS GSO code is failing to properly segment large packets. There are a couple of problems: 1. the inner protocol is not set so the gso segment functions for inner protocol layers are not getting run, and 2 MPLS labels for packets that use the "native" (non-OVS) MPLS code are not properly accounted for in mpls_gso_segment. The MPLS GSO code was added for OVS. It is re-using skb_mac_gso_segment to call the gso segment functions for the higher layer protocols. That means skb_mac_gso_segment is called twice -- once with the network protocol set to MPLS and again with the network protocol set to the inner protocol. This patch sets the inner skb protocol addressing item 1 above and sets the network_header and inner_network_header to mark where the MPLS labels start and end. The MPLS code in OVS is also updated to set the two network markers. >From there the MPLS GSO code uses the difference between the network header and the inner network header to know the size of the MPLS header that was pushed. It then pulls the MPLS header, resets the mac_len and protocol for the inner protocol and then calls skb_mac_gso_segment to segment the skb. Afterward the inner protocol segmentation is done the skb protocol is set to mpls for each segment and the network and mac headers restored. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-25 03:10:44 +00:00
skb_reset_network_header(skb);
skb->dev = out_dev;
skb->protocol = htons(ETH_P_MPLS_UC);
/* Push the new labels */
hdr = mpls_hdr(skb);
bos = true;
for (i = tun_encap_info->labels - 1; i >= 0; i--) {
hdr[i] = mpls_entry_encode(tun_encap_info->label[i],
ttl, 0, bos);
bos = false;
}
mpls_stats_inc_outucastpkts(out_dev, skb);
if (rt)
err = neigh_xmit(NEIGH_ARP_TABLE, out_dev, &rt->rt_gateway,
skb);
else if (rt6)
err = neigh_xmit(NEIGH_ND_TABLE, out_dev, &rt6->rt6i_gateway,
skb);
if (err)
net_dbg_ratelimited("%s: packet transmission failed: %d\n",
__func__, err);
return LWTUNNEL_XMIT_DONE;
drop:
out_mdev = out_dev ? mpls_dev_get(out_dev) : NULL;
if (out_mdev)
MPLS_INC_STATS(out_mdev, tx_errors);
kfree_skb(skb);
return -EINVAL;
}
static int mpls_build_state(struct nlattr *nla,
unsigned int family, const void *cfg,
struct lwtunnel_state **ts,
struct netlink_ext_ack *extack)
{
struct mpls_iptunnel_encap *tun_encap_info;
struct nlattr *tb[MPLS_IPTUNNEL_MAX + 1];
struct lwtunnel_state *newts;
u8 n_labels;
int ret;
ret = nla_parse_nested(tb, MPLS_IPTUNNEL_MAX, nla,
mpls_iptunnel_policy, extack);
if (ret < 0)
return ret;
if (!tb[MPLS_IPTUNNEL_DST])
return -EINVAL;
/* determine number of labels */
if (nla_get_labels(tb[MPLS_IPTUNNEL_DST],
MAX_NEW_LABELS, &n_labels, NULL))
return -EINVAL;
newts = lwtunnel_state_alloc(sizeof(*tun_encap_info) +
n_labels * sizeof(u32));
if (!newts)
return -ENOMEM;
tun_encap_info = mpls_lwtunnel_encap(newts);
ret = nla_get_labels(tb[MPLS_IPTUNNEL_DST], n_labels,
&tun_encap_info->labels, tun_encap_info->label);
if (ret)
goto errout;
tun_encap_info->ttl_propagate = MPLS_TTL_PROP_DEFAULT;
if (tb[MPLS_IPTUNNEL_TTL]) {
tun_encap_info->default_ttl = nla_get_u8(tb[MPLS_IPTUNNEL_TTL]);
/* TTL 0 implies propagate from IP header */
tun_encap_info->ttl_propagate = tun_encap_info->default_ttl ?
MPLS_TTL_PROP_DISABLED :
MPLS_TTL_PROP_ENABLED;
}
newts->type = LWTUNNEL_ENCAP_MPLS;
newts->flags |= LWTUNNEL_STATE_XMIT_REDIRECT;
newts->headroom = mpls_encap_size(tun_encap_info);
*ts = newts;
return 0;
errout:
kfree(newts);
*ts = NULL;
return ret;
}
static int mpls_fill_encap_info(struct sk_buff *skb,
struct lwtunnel_state *lwtstate)
{
struct mpls_iptunnel_encap *tun_encap_info;
tun_encap_info = mpls_lwtunnel_encap(lwtstate);
if (nla_put_labels(skb, MPLS_IPTUNNEL_DST, tun_encap_info->labels,
tun_encap_info->label))
goto nla_put_failure;
if (tun_encap_info->ttl_propagate != MPLS_TTL_PROP_DEFAULT &&
nla_put_u8(skb, MPLS_IPTUNNEL_TTL, tun_encap_info->default_ttl))
goto nla_put_failure;
return 0;
nla_put_failure:
return -EMSGSIZE;
}
static int mpls_encap_nlsize(struct lwtunnel_state *lwtstate)
{
struct mpls_iptunnel_encap *tun_encap_info;
int nlsize;
tun_encap_info = mpls_lwtunnel_encap(lwtstate);
nlsize = nla_total_size(tun_encap_info->labels * 4);
if (tun_encap_info->ttl_propagate != MPLS_TTL_PROP_DEFAULT)
nlsize += nla_total_size(1);
return nlsize;
}
static int mpls_encap_cmp(struct lwtunnel_state *a, struct lwtunnel_state *b)
{
struct mpls_iptunnel_encap *a_hdr = mpls_lwtunnel_encap(a);
struct mpls_iptunnel_encap *b_hdr = mpls_lwtunnel_encap(b);
int l;
if (a_hdr->labels != b_hdr->labels ||
a_hdr->ttl_propagate != b_hdr->ttl_propagate ||
a_hdr->default_ttl != b_hdr->default_ttl)
return 1;
for (l = 0; l < a_hdr->labels; l++)
if (a_hdr->label[l] != b_hdr->label[l])
return 1;
return 0;
}
static const struct lwtunnel_encap_ops mpls_iptun_ops = {
.build_state = mpls_build_state,
.xmit = mpls_xmit,
.fill_encap = mpls_fill_encap_info,
.get_encap_size = mpls_encap_nlsize,
.cmp_encap = mpls_encap_cmp,
.owner = THIS_MODULE,
};
static int __init mpls_iptunnel_init(void)
{
return lwtunnel_encap_add_ops(&mpls_iptun_ops, LWTUNNEL_ENCAP_MPLS);
}
module_init(mpls_iptunnel_init);
static void __exit mpls_iptunnel_exit(void)
{
lwtunnel_encap_del_ops(&mpls_iptun_ops, LWTUNNEL_ENCAP_MPLS);
}
module_exit(mpls_iptunnel_exit);
MODULE_ALIAS_RTNL_LWT(MPLS);
MODULE_DESCRIPTION("MultiProtocol Label Switching IP Tunnels");
MODULE_LICENSE("GPL v2");