leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9a3c4145af
linux/arch/arm/mach-bcm/Makefile

33 lines
1.0 KiB
Makefile
Raw Normal View History

Add support for generic BCM SoC chipsets In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-19 17:46:10 +00:00
#
ARM: bcm21664: Add board support. Add support for the Broadcom BCM21664 mobile SoC. It has two Cortex-A9 cores like the BCM281xx family of chips. BCM21664 and BCM281xx share many IP blocks in addition to the ARM cores. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-03-06 09:18:13 +00:00
# Copyright (C) 2012-2014 Broadcom Corporation
Add support for generic BCM SoC chipsets In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-19 17:46:10 +00:00
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation version 2.
#
# This program is distributed "as is" WITHOUT ANY WARRANTY of any
# kind, whether express or implied; without even the implied warranty
# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
ARM: bcm: clean up config and build targets Currently CONFIG_ARCH_BCM_MOBILE is used to select all (both) Broadcom mobile SoC families. Instead, use that only as a config menu switch, and define specific symbols like ARCH_BCM_281XX to select a particular SoC family. If ARCH_BCM_MOBILE is selected, all of the SoCs will be selected by default, but this way each can be disabled individually as well. Note that BCM281xx and BCM21664 both require the SMC and L2 cache control code, so that code will be built based on ARCH_BCM_MOBILE. Signed-off-by: Alex Elder <elder@linaro.org> [mporter: added ARM: to the description] Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-15 12:37:19 +00:00
# BCM281XX
obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
# BCM21664
obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o
ARM: bcm2835: Move to mach-bcm directory Move the bcm2835 board file into the mach-bcm directory. This allows us to get rid of the mach-bcm2835 directory with the associated Kconfig and Makefile. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> [swarren, adjust defconfig so ARCH_BCM2835 still gets enabled] Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2014-02-21 00:16:11 +00:00
ARM: bcm: clean up config and build targets Currently CONFIG_ARCH_BCM_MOBILE is used to select all (both) Broadcom mobile SoC families. Instead, use that only as a config menu switch, and define specific symbols like ARCH_BCM_281XX to select a particular SoC family. If ARCH_BCM_MOBILE is selected, all of the SoCs will be selected by default, but this way each can be disabled individually as well. Note that BCM281xx and BCM21664 both require the SMC and L2 cache control code, so that code will be built based on ARCH_BCM_MOBILE. Signed-off-by: Alex Elder <elder@linaro.org> [mporter: added ARM: to the description] Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-15 12:37:19 +00:00
# BCM281XX and BCM21664 L2 cache control
ARM: bcm: rename "kona.h" and "kona.c" These source files contain only level-2 cache initialization code, so rename them to make that fact more obvious. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-21 21:53:11 +00:00
obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
ARM: bcm: config option for l2 cache support Add a new config option ARCH_BCM_MOBILE_L2_CACHE that allows support for level-2 cache to be enabled or disabled at build time for BCM218XX and BCM21664 family SoCs. Build support for SMC only if it's required (currently it's only required for to support level 2 cache control). If arch/arm/mach-bcm/kona.c gets compiled, ARCH_BCM_MOBILE_L2_CACHE must have been selected, which implies CONFIG_CACHE_L2X0 is set. There is therefore no need to check CONFIG_CACHE_L2X0 at the top of kona_l2_cache_init(), so get rid of that check. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-21 21:53:07 +00:00
# Support for secure monitor traps
ARM: bcm: use inline assembly for "smc" request Move the code that implements the "smc" call into a C function that uses inline assembly. This allows us to make that function private, and enables us to get rid of "arch/arm/mach-bcm/bcm_kona_smc_asm.S". Rename what had been the "buffer_addr" argument to be "buffer_phys" so it's consistent with other usage in this file. Since it's now easy to do, verify that r12 contains SEC_EXIT_NORMAL upon completion of the SMC. There really isn't a good way to handle the abnormal completion of a secure monitor request. Since "bcm_kona_smc.h" is now only included from C files, eliminate the #ifndef __ASSEMBLY__. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-21 21:53:09 +00:00
obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o
ifeq ($(call as-instr,.arch_extension sec,as_has_sec),as_has_sec)
CFLAGS_bcm_kona_smc.o += -Wa,-march=armv7-a+sec -DREQUIRES_SEC
endif
ARM: bcm: clean up config and build targets Currently CONFIG_ARCH_BCM_MOBILE is used to select all (both) Broadcom mobile SoC families. Instead, use that only as a config menu switch, and define specific symbols like ARCH_BCM_281XX to select a particular SoC family. If ARCH_BCM_MOBILE is selected, all of the SoCs will be selected by default, but this way each can be disabled individually as well. Note that BCM281xx and BCM21664 both require the SMC and L2 cache control code, so that code will be built based on ARCH_BCM_MOBILE. Signed-off-by: Alex Elder <elder@linaro.org> [mporter: added ARM: to the description] Signed-off-by: Matt Porter <mporter@linaro.org>
2014-04-15 12:37:19 +00:00
# BCM2835
obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
# BCM5301X
ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU This patch adds support for the BCM5301X/BCM470X SoCs with an ARM CPUs. Currently just booting to a shell is working and nothing else, no Ethernet, wifi, flash, ... I have some pending patches to make Ethernet work for this device. Mostly device tree support for bcma is missing. This SoC is used in small office and home router with Broadcom SoCs it's internal name is Northstar. This code should support the BCM4707, BCM4708, BCM4709, BCM53010, BCM53011 and BCM53012 SoC. It uses one or two ARM Cortex A9 Cores, some highlights are 2 PCIe 2.0 controllers, 4 Gigabit Ethernet MACs and a USB 3.0 host controller. This SoC uses a dual core CPU, but this is currently not implemented. More information about this SoC can be found here: http://www.anandtech.com/show/5925/broadcom-announces-bcm4708x-and-bcm5301x-socs-for-80211ac-routers Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-03 23:01:43 +00:00
obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
Reference in New Issue Copy Permalink