leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9a0590aec3
linux/fs/btrfs/scrub.c

3338 lines
89 KiB
C
Raw Normal View History

btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/*
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
* Copyright (C) 2011, 2012 STRATO. All rights reserved.
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License v2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 021110-1307, USA.
*/
#include <linux/blkdev.h>
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
#include <linux/ratelimit.h>
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
#include "ctree.h"
#include "volumes.h"
#include "disk-io.h"
#include "ordered-data.h"
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
#include "transaction.h"
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
#include "backref.h"
btrfs: integrating raid-repair and scrub-fixup-nodatasum This ties nodatasum fixup in scrub together with raid repair patches. While both series are working fine alone, scrub will report uncorrectable errors if they occur in a nodatasum extent *and* the page is in the page cache. Previously, we would have triggered readpage to find good data and do the repair. However, readpage wouldn't read anything in the case where the page is up to date in the cache. So, we simply take that good data we have and call repair_io_failure directly (unless the page in the cache is dirty). Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-08-04 16:11:04 +00:00
#include "extent_io.h"
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
#include "dev-replace.h"
Btrfs: integrate integrity check module into btrfs This is the last part of the patch series. It modifies the btrfs code to use the integrity check module if configured to do so with the define BTRFS_FS_CHECK_INTEGRITY. If this define is not set, the only effective change is that code is added that handles the mount option to activate the integrity check. If the mount option is set and the define BTRFS_FS_CHECK_INTEGRITY is not set, that code complains in the log and the mount fails with EINVAL. Add the mount option to activate the usage of the integrity check code. Add invocation of btrfs integrity check code init and cleanup function on mount and umount, respectively. Add hook to call btrfs integrity check code version of submit_bh/submit_bio. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2011-11-09 12:44:05 +00:00
#include "check-integrity.h"
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
#include "rcu-string.h"
Btrfs: RAID5 and RAID6 This builds on David Woodhouse's original Btrfs raid5/6 implementation. The code has changed quite a bit, blame Chris Mason for any bugs. Read/modify/write is done after the higher levels of the filesystem have prepared a given bio. This means the higher layers are not responsible for building full stripes, and they don't need to query for the topology of the extents that may get allocated during delayed allocation runs. It also means different files can easily share the same stripe. But, it does expose us to incorrect parity if we crash or lose power while doing a read/modify/write cycle. This will be addressed in a later commit. Scrub is unable to repair crc errors on raid5/6 chunks. Discard does not work on raid5/6 (yet) The stripe size is fixed at 64KiB per disk. This will be tunable in a later commit. Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-01-29 23:40:14 +00:00
#include "raid56.h"
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/*
* This is only the first step towards a full-features scrub. It reads all
* extent and super block and verifies the checksums. In case a bad checksum
* is found or the extent cannot be read, good data will be written back if
* any can be found.
*
* Future enhancements:
* - In case an unrepairable extent is encountered, track which files are
* affected and report them
* - track and record media errors, throw out bad devices
* - add a mode to also read unallocated space
*/
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
struct scrub_block;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
/*
* the following three values only influence the performance.
* The last one configures the number of parallel and outstanding I/O
* operations. The first two values configure an upper limit for the number
* of (dynamically allocated) pages that are added to a bio.
*/
#define SCRUB_PAGES_PER_RD_BIO 32 /* 128k per bio */
#define SCRUB_PAGES_PER_WR_BIO 32 /* 128k per bio */
#define SCRUB_BIOS_PER_SCTX 64 /* 8MB per device in flight */
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
/*
* the following value times PAGE_SIZE needs to be large enough to match the
* largest node/leaf/sector size that shall be supported.
* Values larger than BTRFS_STRIPE_LEN are not supported.
*/
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
#define SCRUB_MAX_PAGES_PER_BLOCK 16 /* 64k per node/leaf/sector */
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct scrub_page {
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
struct scrub_block *sblock;
struct page *page;
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
struct btrfs_device *dev;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
u64 flags; /* extent flags */
u64 generation;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u64 logical;
u64 physical;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
u64 physical_for_dev_replace;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
atomic_t ref_count;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
struct {
unsigned int mirror_num:8;
unsigned int have_csum:1;
unsigned int io_error:1;
};
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
u8 csum[BTRFS_CSUM_SIZE];
};
struct scrub_bio {
int index;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_device *dev;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct bio *bio;
int err;
u64 logical;
u64 physical;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
#if SCRUB_PAGES_PER_WR_BIO >= SCRUB_PAGES_PER_RD_BIO
struct scrub_page *pagev[SCRUB_PAGES_PER_WR_BIO];
#else
struct scrub_page *pagev[SCRUB_PAGES_PER_RD_BIO];
#endif
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
int page_count;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
int next_free;
struct btrfs_work work;
};
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
struct scrub_block {
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
struct scrub_page *pagev[SCRUB_MAX_PAGES_PER_BLOCK];
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
int page_count;
atomic_t outstanding_pages;
atomic_t ref_count; /* free mem on transition to zero */
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
struct {
unsigned int header_error:1;
unsigned int checksum_error:1;
unsigned int no_io_error_seen:1;
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
unsigned int generation_error:1; /* also sets header_error */
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
};
};
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
struct scrub_wr_ctx {
struct scrub_bio *wr_curr_bio;
struct btrfs_device *tgtdev;
int pages_per_wr_bio; /* <= SCRUB_PAGES_PER_WR_BIO */
atomic_t flush_all_writes;
struct mutex wr_lock;
};
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx {
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
struct scrub_bio *bios[SCRUB_BIOS_PER_SCTX];
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_root *dev_root;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
int first_free;
int curr;
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
atomic_t bios_in_flight;
atomic_t workers_pending;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
spinlock_t list_lock;
wait_queue_head_t list_wait;
u16 csum_size;
struct list_head csum_list;
atomic_t cancel_req;
btrfs: add readonly flag setting the readonly flag prevents writes in case an error is detected Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-23 15:34:19 +00:00
int readonly;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
int pages_per_rd_bio;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u32 sectorsize;
u32 nodesize;
u32 leafsize;
Btrfs: disallow some operations on the device replace target device This patch adds some code to disallow operations on the device that is used as the target for the device replace operation. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 17:29:28 +00:00
int is_dev_replace;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
struct scrub_wr_ctx wr_ctx;
Btrfs: disallow some operations on the device replace target device This patch adds some code to disallow operations on the device that is used as the target for the device replace operation. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 17:29:28 +00:00
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/*
* statistics
*/
struct btrfs_scrub_progress stat;
spinlock_t stat_lock;
};
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
struct scrub_fixup_nodatasum {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_device *dev;
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
u64 logical;
struct btrfs_root *root;
struct btrfs_work work;
int mirror_num;
};
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
struct scrub_copy_nocow_ctx {
struct scrub_ctx *sctx;
u64 logical;
u64 len;
int mirror_num;
u64 physical_for_dev_replace;
struct btrfs_work work;
};
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
struct scrub_warning {
struct btrfs_path *path;
u64 extent_item_size;
char *scratch_buf;
char *msg_buf;
const char *errstr;
sector_t sector;
u64 logical;
struct btrfs_device *dev;
int msg_bufsize;
int scratch_bufsize;
};
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
static void scrub_pending_bio_inc(struct scrub_ctx *sctx);
static void scrub_pending_bio_dec(struct scrub_ctx *sctx);
static void scrub_pending_trans_workers_inc(struct scrub_ctx *sctx);
static void scrub_pending_trans_workers_dec(struct scrub_ctx *sctx);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static int scrub_handle_errored_block(struct scrub_block *sblock_to_check);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static int scrub_setup_recheck_block(struct scrub_ctx *sctx,
Btrfs: pass fs_info to btrfs_map_block() instead of mapping_tree This is required for the device replace procedure in a later step. Two calling functions also had to be changed to have the fs_info pointer: repair_io_failure() and scrub_setup_recheck_block(). Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 14:46:42 +00:00
struct btrfs_fs_info *fs_info,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
struct scrub_block *original_sblock,
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u64 length, u64 logical,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
struct scrub_block *sblocks_for_recheck);
Btrfs: in scrub repair code, simplify alloc error handling In the scrub repair code, the code is changed to handle memory allocation errors a little bit smarter. The change is to handle it just like a read error. This simplifies the code and removes a couple of lines of code, since the code to handle read errors is there anyway. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:16:26 +00:00
static void scrub_recheck_block(struct btrfs_fs_info *fs_info,
struct scrub_block *sblock, int is_metadata,
int have_csum, u8 *csum, u64 generation,
u16 csum_size);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static void scrub_recheck_block_checksum(struct btrfs_fs_info *fs_info,
struct scrub_block *sblock,
int is_metadata, int have_csum,
const u8 *csum, u64 generation,
u16 csum_size);
static void scrub_complete_bio_end_io(struct bio *bio, int err);
static int scrub_repair_block_from_good_copy(struct scrub_block *sblock_bad,
struct scrub_block *sblock_good,
int force_write);
static int scrub_repair_page_from_good_copy(struct scrub_block *sblock_bad,
struct scrub_block *sblock_good,
int page_num, int force_write);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
static void scrub_write_block_to_dev_replace(struct scrub_block *sblock);
static int scrub_write_page_to_dev_replace(struct scrub_block *sblock,
int page_num);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static int scrub_checksum_data(struct scrub_block *sblock);
static int scrub_checksum_tree_block(struct scrub_block *sblock);
static int scrub_checksum_super(struct scrub_block *sblock);
static void scrub_block_get(struct scrub_block *sblock);
static void scrub_block_put(struct scrub_block *sblock);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
static void scrub_page_get(struct scrub_page *spage);
static void scrub_page_put(struct scrub_page *spage);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
static int scrub_add_page_to_rd_bio(struct scrub_ctx *sctx,
struct scrub_page *spage);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static int scrub_pages(struct scrub_ctx *sctx, u64 logical, u64 len,
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
u64 physical, struct btrfs_device *dev, u64 flags,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
u64 gen, int mirror_num, u8 *csum, int force,
u64 physical_for_dev_replace);
Btrfs: minor cleanup in scrub Just a minor cleanup commit in preparation for the big block changes. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:26 +00:00
static void scrub_bio_end_io(struct bio *bio, int err);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static void scrub_bio_end_io_worker(struct btrfs_work *work);
static void scrub_block_complete(struct scrub_block *sblock);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
static void scrub_remap_extent(struct btrfs_fs_info *fs_info,
u64 extent_logical, u64 extent_len,
u64 *extent_physical,
struct btrfs_device **extent_dev,
int *extent_mirror_num);
static int scrub_setup_wr_ctx(struct scrub_ctx *sctx,
struct scrub_wr_ctx *wr_ctx,
struct btrfs_fs_info *fs_info,
struct btrfs_device *dev,
int is_dev_replace);
static void scrub_free_wr_ctx(struct scrub_wr_ctx *wr_ctx);
static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx,
struct scrub_page *spage);
static void scrub_wr_submit(struct scrub_ctx *sctx);
static void scrub_wr_bio_end_io(struct bio *bio, int err);
static void scrub_wr_bio_end_io_worker(struct btrfs_work *work);
static int write_page_nocow(struct scrub_ctx *sctx,
u64 physical_for_dev_replace, struct page *page);
static int copy_nocow_pages_for_inode(u64 inum, u64 offset, u64 root,
void *ctx);
static int copy_nocow_pages(struct scrub_ctx *sctx, u64 logical, u64 len,
int mirror_num, u64 physical_for_dev_replace);
static void copy_nocow_pages_worker(struct btrfs_work *work);
Btrfs: minor cleanup in scrub Just a minor cleanup commit in preparation for the big block changes. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:26 +00:00
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
static void scrub_pending_bio_inc(struct scrub_ctx *sctx)
{
atomic_inc(&sctx->bios_in_flight);
}
static void scrub_pending_bio_dec(struct scrub_ctx *sctx)
{
atomic_dec(&sctx->bios_in_flight);
wake_up(&sctx->list_wait);
}
/*
* used for workers that require transaction commits (i.e., for the
* NOCOW case)
*/
static void scrub_pending_trans_workers_inc(struct scrub_ctx *sctx)
{
struct btrfs_fs_info *fs_info = sctx->dev_root->fs_info;
/*
* increment scrubs_running to prevent cancel requests from
* completing as long as a worker is running. we must also
* increment scrubs_paused to prevent deadlocking on pause
* requests used for transactions commits (as the worker uses a
* transaction context). it is safe to regard the worker
* as paused for all matters practical. effectively, we only
* avoid cancellation requests from completing.
*/
mutex_lock(&fs_info->scrub_lock);
atomic_inc(&fs_info->scrubs_running);
atomic_inc(&fs_info->scrubs_paused);
mutex_unlock(&fs_info->scrub_lock);
atomic_inc(&sctx->workers_pending);
}
/* used for workers that require transaction commits */
static void scrub_pending_trans_workers_dec(struct scrub_ctx *sctx)
{
struct btrfs_fs_info *fs_info = sctx->dev_root->fs_info;
/*
* see scrub_pending_trans_workers_inc() why we're pretending
* to be paused in the scrub counters
*/
mutex_lock(&fs_info->scrub_lock);
atomic_dec(&fs_info->scrubs_running);
atomic_dec(&fs_info->scrubs_paused);
mutex_unlock(&fs_info->scrub_lock);
atomic_dec(&sctx->workers_pending);
wake_up(&fs_info->scrub_pause_wait);
wake_up(&sctx->list_wait);
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static void scrub_free_csums(struct scrub_ctx *sctx)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
while (!list_empty(&sctx->csum_list)) {
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct btrfs_ordered_sum *sum;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sum = list_first_entry(&sctx->csum_list,
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct btrfs_ordered_sum, list);
list_del(&sum->list);
kfree(sum);
}
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static noinline_for_stack void scrub_free_ctx(struct scrub_ctx *sctx)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
int i;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
if (!sctx)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
return;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
scrub_free_wr_ctx(&sctx->wr_ctx);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/* this can happen when scrub is cancelled */
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
if (sctx->curr != -1) {
struct scrub_bio *sbio = sctx->bios[sctx->curr];
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
for (i = 0; i < sbio->page_count; i++) {
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
WARN_ON(!sbio->pagev[i]->page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
scrub_block_put(sbio->pagev[i]->sblock);
}
bio_put(sbio->bio);
}
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
for (i = 0; i < SCRUB_BIOS_PER_SCTX; ++i) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_bio *sbio = sctx->bios[i];
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
if (!sbio)
break;
kfree(sbio);
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
scrub_free_csums(sctx);
kfree(sctx);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
static noinline_for_stack
Btrfs: disallow some operations on the device replace target device This patch adds some code to disallow operations on the device that is used as the target for the device replace operation. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 17:29:28 +00:00
struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
int i;
struct btrfs_fs_info *fs_info = dev->dev_root->fs_info;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
int pages_per_rd_bio;
int ret;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
/*
* the setting of pages_per_rd_bio is correct for scrub but might
* be wrong for the dev_replace code where we might read from
* different devices in the initial huge bios. However, that
* code is able to correctly handle the case when adding a page
* to a bio fails.
*/
if (dev->bdev)
pages_per_rd_bio = min_t(int, SCRUB_PAGES_PER_RD_BIO,
bio_get_nr_vecs(dev->bdev));
else
pages_per_rd_bio = SCRUB_PAGES_PER_RD_BIO;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sctx = kzalloc(sizeof(*sctx), GFP_NOFS);
if (!sctx)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
goto nomem;
Btrfs: disallow some operations on the device replace target device This patch adds some code to disallow operations on the device that is used as the target for the device replace operation. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 17:29:28 +00:00
sctx->is_dev_replace = is_dev_replace;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
sctx->pages_per_rd_bio = pages_per_rd_bio;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sctx->curr = -1;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
sctx->dev_root = dev->dev_root;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
for (i = 0; i < SCRUB_BIOS_PER_SCTX; ++i) {
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct scrub_bio *sbio;
sbio = kzalloc(sizeof(*sbio), GFP_NOFS);
if (!sbio)
goto nomem;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sctx->bios[i] = sbio;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
sbio->index = i;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sbio->sctx = sctx;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
sbio->page_count = 0;
sbio->work.func = scrub_bio_end_io_worker;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (i != SCRUB_BIOS_PER_SCTX - 1)
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sctx->bios[i]->next_free = i + 1;
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
else
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sctx->bios[i]->next_free = -1;
}
sctx->first_free = 0;
sctx->nodesize = dev->dev_root->nodesize;
sctx->leafsize = dev->dev_root->leafsize;
sctx->sectorsize = dev->dev_root->sectorsize;
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
atomic_set(&sctx->bios_in_flight, 0);
atomic_set(&sctx->workers_pending, 0);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
atomic_set(&sctx->cancel_req, 0);
sctx->csum_size = btrfs_super_csum_size(fs_info->super_copy);
INIT_LIST_HEAD(&sctx->csum_list);
spin_lock_init(&sctx->list_lock);
spin_lock_init(&sctx->stat_lock);
init_waitqueue_head(&sctx->list_wait);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
ret = scrub_setup_wr_ctx(sctx, &sctx->wr_ctx, fs_info,
fs_info->dev_replace.tgtdev, is_dev_replace);
if (ret) {
scrub_free_ctx(sctx);
return ERR_PTR(ret);
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
return sctx;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
nomem:
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
scrub_free_ctx(sctx);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
return ERR_PTR(-ENOMEM);
}
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
static int scrub_print_warning_inode(u64 inum, u64 offset, u64 root,
void *warn_ctx)
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
{
u64 isize;
u32 nlink;
int ret;
int i;
struct extent_buffer *eb;
struct btrfs_inode_item *inode_item;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
struct scrub_warning *swarn = warn_ctx;
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
struct btrfs_fs_info *fs_info = swarn->dev->dev_root->fs_info;
struct inode_fs_paths *ipath = NULL;
struct btrfs_root *local_root;
struct btrfs_key root_key;
root_key.objectid = root;
root_key.type = BTRFS_ROOT_ITEM_KEY;
root_key.offset = (u64)-1;
local_root = btrfs_read_fs_root_no_name(fs_info, &root_key);
if (IS_ERR(local_root)) {
ret = PTR_ERR(local_root);
goto err;
}
ret = inode_item_info(inum, 0, local_root, swarn->path);
if (ret) {
btrfs_release_path(swarn->path);
goto err;
}
eb = swarn->path->nodes[0];
inode_item = btrfs_item_ptr(eb, swarn->path->slots[0],
struct btrfs_inode_item);
isize = btrfs_inode_size(eb, inode_item);
nlink = btrfs_inode_nlink(eb, inode_item);
btrfs_release_path(swarn->path);
ipath = init_ipath(4096, local_root, swarn->path);
btrfs scrub: handle -ENOMEM from init_ipath() init_ipath() can return an ERR_PTR(-ENOMEM). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
2011-11-16 08:28:01 +00:00
if (IS_ERR(ipath)) {
ret = PTR_ERR(ipath);
ipath = NULL;
goto err;
}
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
ret = paths_from_inode(inum, ipath);
if (ret < 0)
goto err;
/*
* we deliberately ignore the bit ipath might have been too small to
* hold all of the paths here
*/
for (i = 0; i < ipath->fspath->elem_cnt; ++i)
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
printk_in_rcu(KERN_WARNING "btrfs: %s at logical %llu on dev "
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
"%s, sector %llu, root %llu, inode %llu, offset %llu, "
"length %llu, links %u (path: %s)\n", swarn->errstr,
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
swarn->logical, rcu_str_deref(swarn->dev->name),
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
(unsigned long long)swarn->sector, root, inum, offset,
min(isize - offset, (u64)PAGE_SIZE), nlink,
btrfs: Fix up 32/64-bit compatibility for new ioctls This patch casts to unsigned long before casting to a pointer and fixes the following warnings: fs/btrfs/extent_io.c:2289:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] fs/btrfs/ioctl.c:2933:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] fs/btrfs/ioctl.c:2937:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/ioctl.c:3020:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/scrub.c:275:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/backref.c:686:27: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-11-20 12:31:57 +00:00
(char *)(unsigned long)ipath->fspath->val[i]);
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
free_ipath(ipath);
return 0;
err:
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
printk_in_rcu(KERN_WARNING "btrfs: %s at logical %llu on dev "
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
"%s, sector %llu, root %llu, inode %llu, offset %llu: path "
"resolving failed with ret=%d\n", swarn->errstr,
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
swarn->logical, rcu_str_deref(swarn->dev->name),
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
(unsigned long long)swarn->sector, root, inum, offset, ret);
free_ipath(ipath);
return 0;
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static void scrub_print_warning(const char *errstr, struct scrub_block *sblock)
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
{
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_device *dev;
struct btrfs_fs_info *fs_info;
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
struct btrfs_path *path;
struct btrfs_key found_key;
struct extent_buffer *eb;
struct btrfs_extent_item *ei;
struct scrub_warning swarn;
Btrfs: fix a bug in parsing return value in logical resolve In logical resolve, we parse extent_from_logical()'s 'ret' as a kind of flag. It is possible to lose our errors because (-EXXXX & BTRFS_EXTENT_FLAG_TREE_BLOCK) is true. I'm not sure if it is on purpose, it just looks too hacky if it is. I'd rather use a real flag and a 'ret' to catch errors. Acked-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Liu Bo <liub.liubo@gmail.com>
2012-09-08 02:01:28 +00:00
unsigned long ptr = 0;
u64 extent_item_pos;
u64 flags = 0;
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
u64 ref_root;
Btrfs: fix a bug in parsing return value in logical resolve In logical resolve, we parse extent_from_logical()'s 'ret' as a kind of flag. It is possible to lose our errors because (-EXXXX & BTRFS_EXTENT_FLAG_TREE_BLOCK) is true. I'm not sure if it is on purpose, it just looks too hacky if it is. I'd rather use a real flag and a 'ret' to catch errors. Acked-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Liu Bo <liub.liubo@gmail.com>
2012-09-08 02:01:28 +00:00
u32 item_size;
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
u8 ref_level;
const int bufsize = 4096;
Btrfs: fix a bug in parsing return value in logical resolve In logical resolve, we parse extent_from_logical()'s 'ret' as a kind of flag. It is possible to lose our errors because (-EXXXX & BTRFS_EXTENT_FLAG_TREE_BLOCK) is true. I'm not sure if it is on purpose, it just looks too hacky if it is. I'd rather use a real flag and a 'ret' to catch errors. Acked-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Liu Bo <liub.liubo@gmail.com>
2012-09-08 02:01:28 +00:00
int ret;
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
WARN_ON(sblock->page_count < 1);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
dev = sblock->pagev[0]->dev;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
fs_info = sblock->sctx->dev_root->fs_info;
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
path = btrfs_alloc_path();
swarn.scratch_buf = kmalloc(bufsize, GFP_NOFS);
swarn.msg_buf = kmalloc(bufsize, GFP_NOFS);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
swarn.sector = (sblock->pagev[0]->physical) >> 9;
swarn.logical = sblock->pagev[0]->logical;
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
swarn.errstr = errstr;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
swarn.dev = NULL;
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
swarn.msg_bufsize = bufsize;
swarn.scratch_bufsize = bufsize;
if (!path || !swarn.scratch_buf || !swarn.msg_buf)
goto out;
Btrfs: fix a bug in parsing return value in logical resolve In logical resolve, we parse extent_from_logical()'s 'ret' as a kind of flag. It is possible to lose our errors because (-EXXXX & BTRFS_EXTENT_FLAG_TREE_BLOCK) is true. I'm not sure if it is on purpose, it just looks too hacky if it is. I'd rather use a real flag and a 'ret' to catch errors. Acked-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Liu Bo <liub.liubo@gmail.com>
2012-09-08 02:01:28 +00:00
ret = extent_from_logical(fs_info, swarn.logical, path, &found_key,
&flags);
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
if (ret < 0)
goto out;
Btrfs: new backref walking code The old backref iteration code could only safely be used on commit roots. Besides this limitation, it had bugs in finding the roots for these references. This commit replaces large parts of it by btrfs_find_all_roots() which a) really finds all roots and the correct roots, b) works correctly under heavy file system load, c) considers delayed refs. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-12-02 13:56:41 +00:00
extent_item_pos = swarn.logical - found_key.objectid;
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
swarn.extent_item_size = found_key.offset;
eb = path->nodes[0];
ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
item_size = btrfs_item_size_nr(eb, path->slots[0]);
Btrfs: fix a bug in parsing return value in logical resolve In logical resolve, we parse extent_from_logical()'s 'ret' as a kind of flag. It is possible to lose our errors because (-EXXXX & BTRFS_EXTENT_FLAG_TREE_BLOCK) is true. I'm not sure if it is on purpose, it just looks too hacky if it is. I'd rather use a real flag and a 'ret' to catch errors. Acked-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Liu Bo <liub.liubo@gmail.com>
2012-09-08 02:01:28 +00:00
if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
do {
ret = tree_backref_for_extent(&ptr, eb, ei, item_size,
&ref_root, &ref_level);
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
printk_in_rcu(KERN_WARNING
Btrfs: minor cleanup in scrub Just a minor cleanup commit in preparation for the big block changes. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:26 +00:00
"btrfs: %s at logical %llu on dev %s, "
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
"sector %llu: metadata %s (level %d) in tree "
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
"%llu\n", errstr, swarn.logical,
rcu_str_deref(dev->name),
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
(unsigned long long)swarn.sector,
ref_level ? "node" : "leaf",
ret < 0 ? -1 : ref_level,
ret < 0 ? -1 : ref_root);
} while (ret != 1);
Btrfs: don't drop path when printing out tree errors in scrub A user reported a panic where we were panicing somewhere in tree_backref_for_extent from scrub_print_warning. He only captured the trace but looking at scrub_print_warning we drop the path right before we mess with the extent buffer to print out a bunch of stuff, which isn't right. So fix this by dropping the path after we use the eb if we need to. Thanks, Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-29 14:09:34 +00:00
btrfs_release_path(path);
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
} else {
Btrfs: don't drop path when printing out tree errors in scrub A user reported a panic where we were panicing somewhere in tree_backref_for_extent from scrub_print_warning. He only captured the trace but looking at scrub_print_warning we drop the path right before we mess with the extent buffer to print out a bunch of stuff, which isn't right. So fix this by dropping the path after we use the eb if we need to. Thanks, Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-03-29 14:09:34 +00:00
btrfs_release_path(path);
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
swarn.path = path;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
swarn.dev = dev;
Btrfs: fix regression in scrub path resolving In commit 4692cf58 we introduced new backref walking code for btrfs. This assumes we're searching live roots, which requires a transaction context. While scrubbing, however, we must not join a transaction because this could deadlock with the commit path. Additionally, what scrub really wants to do is resolving a logical address in the commit root it's currently checking. This patch adds support for logical to path resolving on commit roots and makes scrub use that. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2012-03-23 16:32:28 +00:00
iterate_extent_inodes(fs_info, found_key.objectid,
extent_item_pos, 1,
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
scrub_print_warning_inode, &swarn);
}
out:
btrfs_free_path(path);
kfree(swarn.scratch_buf);
kfree(swarn.msg_buf);
}
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
static int scrub_fixup_readpage(u64 inum, u64 offset, u64 root, void *fixup_ctx)
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
{
btrfs: integrating raid-repair and scrub-fixup-nodatasum This ties nodatasum fixup in scrub together with raid repair patches. While both series are working fine alone, scrub will report uncorrectable errors if they occur in a nodatasum extent *and* the page is in the page cache. Previously, we would have triggered readpage to find good data and do the repair. However, readpage wouldn't read anything in the case where the page is up to date in the cache. So, we simply take that good data we have and call repair_io_failure directly (unless the page in the cache is dirty). Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-08-04 16:11:04 +00:00
struct page *page = NULL;
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
unsigned long index;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
struct scrub_fixup_nodatasum *fixup = fixup_ctx;
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
int ret;
btrfs: integrating raid-repair and scrub-fixup-nodatasum This ties nodatasum fixup in scrub together with raid repair patches. While both series are working fine alone, scrub will report uncorrectable errors if they occur in a nodatasum extent *and* the page is in the page cache. Previously, we would have triggered readpage to find good data and do the repair. However, readpage wouldn't read anything in the case where the page is up to date in the cache. So, we simply take that good data we have and call repair_io_failure directly (unless the page in the cache is dirty). Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-08-04 16:11:04 +00:00
int corrected = 0;
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
struct btrfs_key key;
btrfs: integrating raid-repair and scrub-fixup-nodatasum This ties nodatasum fixup in scrub together with raid repair patches. While both series are working fine alone, scrub will report uncorrectable errors if they occur in a nodatasum extent *and* the page is in the page cache. Previously, we would have triggered readpage to find good data and do the repair. However, readpage wouldn't read anything in the case where the page is up to date in the cache. So, we simply take that good data we have and call repair_io_failure directly (unless the page in the cache is dirty). Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-08-04 16:11:04 +00:00
struct inode *inode = NULL;
Btrfs: fix race between snapshot deletion and getting inode While running snapshot testscript created by Mitch and David, the race between autodefrag and snapshot deletion can lead to corruption of dead_root list so that we can get crash on btrfs_clean_old_snapshots(). And besides autodefrag, scrub also does the same thing, ie. read root first and get inode. Here is the story(take autodefrag as an example): (1) when we delete a snapshot or subvolume, it will set its root's refs to zero and do a iput() on its own inode, and if this inode happens to be the only active in-meory one in root's inode rbtree, it will add itself to the global dead_roots list for later cleanup. (2) after (1), the autodefrag thread may read another inode for defrag and the inode is just in the deleted snapshot/subvolume, but all of these are without checking if the root is still valid(refs > 0). So the end up result is adding the deleted snapshot/subvolume's root to the global dead_roots list AGAIN. Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu. So all we need to do is to take the lock to protect 'read root and get inode', since we synchronize to wait for the rcu grace period before adding something to the global dead_roots list. Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-01-29 03:22:10 +00:00
struct btrfs_fs_info *fs_info;
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
u64 end = offset + PAGE_SIZE - 1;
struct btrfs_root *local_root;
Btrfs: fix race between snapshot deletion and getting inode While running snapshot testscript created by Mitch and David, the race between autodefrag and snapshot deletion can lead to corruption of dead_root list so that we can get crash on btrfs_clean_old_snapshots(). And besides autodefrag, scrub also does the same thing, ie. read root first and get inode. Here is the story(take autodefrag as an example): (1) when we delete a snapshot or subvolume, it will set its root's refs to zero and do a iput() on its own inode, and if this inode happens to be the only active in-meory one in root's inode rbtree, it will add itself to the global dead_roots list for later cleanup. (2) after (1), the autodefrag thread may read another inode for defrag and the inode is just in the deleted snapshot/subvolume, but all of these are without checking if the root is still valid(refs > 0). So the end up result is adding the deleted snapshot/subvolume's root to the global dead_roots list AGAIN. Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu. So all we need to do is to take the lock to protect 'read root and get inode', since we synchronize to wait for the rcu grace period before adding something to the global dead_roots list. Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-01-29 03:22:10 +00:00
int srcu_index;
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
key.objectid = root;
key.type = BTRFS_ROOT_ITEM_KEY;
key.offset = (u64)-1;
Btrfs: fix race between snapshot deletion and getting inode While running snapshot testscript created by Mitch and David, the race between autodefrag and snapshot deletion can lead to corruption of dead_root list so that we can get crash on btrfs_clean_old_snapshots(). And besides autodefrag, scrub also does the same thing, ie. read root first and get inode. Here is the story(take autodefrag as an example): (1) when we delete a snapshot or subvolume, it will set its root's refs to zero and do a iput() on its own inode, and if this inode happens to be the only active in-meory one in root's inode rbtree, it will add itself to the global dead_roots list for later cleanup. (2) after (1), the autodefrag thread may read another inode for defrag and the inode is just in the deleted snapshot/subvolume, but all of these are without checking if the root is still valid(refs > 0). So the end up result is adding the deleted snapshot/subvolume's root to the global dead_roots list AGAIN. Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu. So all we need to do is to take the lock to protect 'read root and get inode', since we synchronize to wait for the rcu grace period before adding something to the global dead_roots list. Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-01-29 03:22:10 +00:00
fs_info = fixup->root->fs_info;
srcu_index = srcu_read_lock(&fs_info->subvol_srcu);
local_root = btrfs_read_fs_root_no_name(fs_info, &key);
if (IS_ERR(local_root)) {
srcu_read_unlock(&fs_info->subvol_srcu, srcu_index);
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
return PTR_ERR(local_root);
Btrfs: fix race between snapshot deletion and getting inode While running snapshot testscript created by Mitch and David, the race between autodefrag and snapshot deletion can lead to corruption of dead_root list so that we can get crash on btrfs_clean_old_snapshots(). And besides autodefrag, scrub also does the same thing, ie. read root first and get inode. Here is the story(take autodefrag as an example): (1) when we delete a snapshot or subvolume, it will set its root's refs to zero and do a iput() on its own inode, and if this inode happens to be the only active in-meory one in root's inode rbtree, it will add itself to the global dead_roots list for later cleanup. (2) after (1), the autodefrag thread may read another inode for defrag and the inode is just in the deleted snapshot/subvolume, but all of these are without checking if the root is still valid(refs > 0). So the end up result is adding the deleted snapshot/subvolume's root to the global dead_roots list AGAIN. Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu. So all we need to do is to take the lock to protect 'read root and get inode', since we synchronize to wait for the rcu grace period before adding something to the global dead_roots list. Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-01-29 03:22:10 +00:00
}
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
key.type = BTRFS_INODE_ITEM_KEY;
key.objectid = inum;
key.offset = 0;
Btrfs: fix race between snapshot deletion and getting inode While running snapshot testscript created by Mitch and David, the race between autodefrag and snapshot deletion can lead to corruption of dead_root list so that we can get crash on btrfs_clean_old_snapshots(). And besides autodefrag, scrub also does the same thing, ie. read root first and get inode. Here is the story(take autodefrag as an example): (1) when we delete a snapshot or subvolume, it will set its root's refs to zero and do a iput() on its own inode, and if this inode happens to be the only active in-meory one in root's inode rbtree, it will add itself to the global dead_roots list for later cleanup. (2) after (1), the autodefrag thread may read another inode for defrag and the inode is just in the deleted snapshot/subvolume, but all of these are without checking if the root is still valid(refs > 0). So the end up result is adding the deleted snapshot/subvolume's root to the global dead_roots list AGAIN. Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu. So all we need to do is to take the lock to protect 'read root and get inode', since we synchronize to wait for the rcu grace period before adding something to the global dead_roots list. Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-01-29 03:22:10 +00:00
inode = btrfs_iget(fs_info->sb, &key, local_root, NULL);
srcu_read_unlock(&fs_info->subvol_srcu, srcu_index);
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
if (IS_ERR(inode))
return PTR_ERR(inode);
index = offset >> PAGE_CACHE_SHIFT;
page = find_or_create_page(inode->i_mapping, index, GFP_NOFS);
btrfs: integrating raid-repair and scrub-fixup-nodatasum This ties nodatasum fixup in scrub together with raid repair patches. While both series are working fine alone, scrub will report uncorrectable errors if they occur in a nodatasum extent *and* the page is in the page cache. Previously, we would have triggered readpage to find good data and do the repair. However, readpage wouldn't read anything in the case where the page is up to date in the cache. So, we simply take that good data we have and call repair_io_failure directly (unless the page in the cache is dirty). Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-08-04 16:11:04 +00:00
if (!page) {
ret = -ENOMEM;
goto out;
}
if (PageUptodate(page)) {
if (PageDirty(page)) {
/*
* we need to write the data to the defect sector. the
* data that was in that sector is not in memory,
* because the page was modified. we must not write the
* modified page to that sector.
*
* TODO: what could be done here: wait for the delalloc
* runner to write out that page (might involve
* COW) and see whether the sector is still
* referenced afterwards.
*
* For the meantime, we'll treat this error
* incorrectable, although there is a chance that a
* later scrub will find the bad sector again and that
* there's no dirty page in memory, then.
*/
ret = -EIO;
goto out;
}
Btrfs: pass fs_info to btrfs_map_block() instead of mapping_tree This is required for the device replace procedure in a later step. Two calling functions also had to be changed to have the fs_info pointer: repair_io_failure() and scrub_setup_recheck_block(). Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 14:46:42 +00:00
fs_info = BTRFS_I(inode)->root->fs_info;
ret = repair_io_failure(fs_info, offset, PAGE_SIZE,
btrfs: integrating raid-repair and scrub-fixup-nodatasum This ties nodatasum fixup in scrub together with raid repair patches. While both series are working fine alone, scrub will report uncorrectable errors if they occur in a nodatasum extent *and* the page is in the page cache. Previously, we would have triggered readpage to find good data and do the repair. However, readpage wouldn't read anything in the case where the page is up to date in the cache. So, we simply take that good data we have and call repair_io_failure directly (unless the page in the cache is dirty). Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-08-04 16:11:04 +00:00
fixup->logical, page,
fixup->mirror_num);
unlock_page(page);
corrected = !ret;
} else {
/*
* we need to get good data first. the general readpage path
* will call repair_io_failure for us, we just have to make
* sure we read the bad mirror.
*/
ret = set_extent_bits(&BTRFS_I(inode)->io_tree, offset, end,
EXTENT_DAMAGED, GFP_NOFS);
if (ret) {
/* set_extent_bits should give proper error */
WARN_ON(ret > 0);
if (ret > 0)
ret = -EFAULT;
goto out;
}
ret = extent_read_full_page(&BTRFS_I(inode)->io_tree, page,
btrfs_get_extent,
fixup->mirror_num);
wait_on_page_locked(page);
corrected = !test_range_bit(&BTRFS_I(inode)->io_tree, offset,
end, EXTENT_DAMAGED, 0, NULL);
if (!corrected)
clear_extent_bits(&BTRFS_I(inode)->io_tree, offset, end,
EXTENT_DAMAGED, GFP_NOFS);
}
out:
if (page)
put_page(page);
if (inode)
iput(inode);
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
if (ret < 0)
return ret;
if (ret == 0 && corrected) {
/*
* we only need to call readpage for one of the inodes belonging
* to this extent. so make iterate_extent_inodes stop
*/
return 1;
}
return -EIO;
}
static void scrub_fixup_nodatasum(struct btrfs_work *work)
{
int ret;
struct scrub_fixup_nodatasum *fixup;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx;
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
struct btrfs_trans_handle *trans = NULL;
struct btrfs_fs_info *fs_info;
struct btrfs_path *path;
int uncorrectable = 0;
fixup = container_of(work, struct scrub_fixup_nodatasum, work);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sctx = fixup->sctx;
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
fs_info = fixup->root->fs_info;
path = btrfs_alloc_path();
if (!path) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
++sctx->stat.malloc_errors;
spin_unlock(&sctx->stat_lock);
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
uncorrectable = 1;
goto out;
}
trans = btrfs_join_transaction(fixup->root);
if (IS_ERR(trans)) {
uncorrectable = 1;
goto out;
}
/*
* the idea is to trigger a regular read through the standard path. we
* read a page from the (failed) logical address by specifying the
* corresponding copynum of the failed sector. thus, that readpage is
* expected to fail.
* that is the point where on-the-fly error correction will kick in
* (once it's finished) and rewrite the failed sector if a good copy
* can be found.
*/
ret = iterate_inodes_from_logical(fixup->logical, fixup->root->fs_info,
path, scrub_fixup_readpage,
fixup);
if (ret < 0) {
uncorrectable = 1;
goto out;
}
WARN_ON(ret != 1);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
++sctx->stat.corrected_errors;
spin_unlock(&sctx->stat_lock);
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
out:
if (trans && !IS_ERR(trans))
btrfs_end_transaction(trans, fixup->root);
if (uncorrectable) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
++sctx->stat.uncorrectable_errors;
spin_unlock(&sctx->stat_lock);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
btrfs_dev_replace_stats_inc(
&sctx->dev_root->fs_info->dev_replace.
num_uncorrectable_read_errors);
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
printk_ratelimited_in_rcu(KERN_ERR
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
"btrfs: unable to fixup (nodatasum) error at logical %llu on dev %s\n",
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
(unsigned long long)fixup->logical,
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
rcu_str_deref(fixup->dev->name));
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
}
btrfs_free_path(path);
kfree(fixup);
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
scrub_pending_trans_workers_dec(sctx);
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/*
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
* scrub_handle_errored_block gets called when either verification of the
* pages failed or the bio failed to read, e.g. with EIO. In the latter
* case, this function handles all pages in the bio, even though only one
* may be bad.
* The goal of this function is to repair the errored block by using the
* contents of one of the mirrors.
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
*/
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static int scrub_handle_errored_block(struct scrub_block *sblock_to_check)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx = sblock_to_check->sctx;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_device *dev;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
struct btrfs_fs_info *fs_info;
u64 length;
u64 logical;
u64 generation;
unsigned int failed_mirror_index;
unsigned int is_metadata;
unsigned int have_csum;
u8 *csum;
struct scrub_block *sblocks_for_recheck; /* holds one for each mirror */
struct scrub_block *sblock_bad;
int ret;
int mirror_index;
int page_num;
int success;
btrfs scrub: print paths of corrupted files While scrubbing, we may encounter various errors. Previously, a logical address was printed to the log only. Now, all paths belonging to that address are resolved and printed separately. That should work for hardlinks as well as reflinks. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:59:12 +00:00
static DEFINE_RATELIMIT_STATE(_rs, DEFAULT_RATELIMIT_INTERVAL,
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
DEFAULT_RATELIMIT_BURST);
BUG_ON(sblock_to_check->page_count < 1);
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
fs_info = sctx->dev_root->fs_info;
Btrfs: fix BUG() in scrub when first superblock reading gives EIO This fixes a very special case that can be reproduced by just disconnecting a disk at runtime, and without unmounting the filesystem first, start scrub on the filesystem with the disconnected disk. All read and write EIOs are handled correctly, only the first superblock is an exception and gives a BUG() in a subfunction. The BUG() is correct, it would crash later otherwise. The subfunction must not be called for superblocks and this is what the fix changes. Reported-by: Joeri Vanthienen <mail@joerivanthienen.be> Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-14 18:57:29 +00:00
if (sblock_to_check->pagev[0]->flags & BTRFS_EXTENT_FLAG_SUPER) {
/*
* if we find an error in a super block, we just report it.
* They will get written with the next transaction commit
* anyway
*/
spin_lock(&sctx->stat_lock);
++sctx->stat.super_errors;
spin_unlock(&sctx->stat_lock);
return 0;
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
length = sblock_to_check->page_count * PAGE_SIZE;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
logical = sblock_to_check->pagev[0]->logical;
generation = sblock_to_check->pagev[0]->generation;
BUG_ON(sblock_to_check->pagev[0]->mirror_num < 1);
failed_mirror_index = sblock_to_check->pagev[0]->mirror_num - 1;
is_metadata = !(sblock_to_check->pagev[0]->flags &
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
BTRFS_EXTENT_FLAG_DATA);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
have_csum = sblock_to_check->pagev[0]->have_csum;
csum = sblock_to_check->pagev[0]->csum;
dev = sblock_to_check->pagev[0]->dev;
btrfs scrub: added unverified_errors In normal operation, scrub is reading data sequentially in large portions. In case of an i/o error, we try to find the corrupted area(s) by issuing page sized read requests. With this commit we increment the unverified_errors counter if all of the small size requests succeed. Userland patches carrying such conspicous events to the administrator should already be around. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:56:13 +00:00
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (sctx->is_dev_replace && !is_metadata && !have_csum) {
sblocks_for_recheck = NULL;
goto nodatasum_case;
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/*
* read all mirrors one after the other. This includes to
* re-read the extent or metadata block that failed (that was
* the cause that this fixup code is called) another time,
* page by page this time in order to know which pages
* caused I/O errors and which ones are good (for all mirrors).
* It is the goal to handle the situation when more than one
* mirror contains I/O errors, but the errors do not
* overlap, i.e. the data can be repaired by selecting the
* pages from those mirrors without I/O error on the
* particular pages. One example (with blocks >= 2 * PAGE_SIZE)
* would be that mirror #1 has an I/O error on the first page,
* the second page is good, and mirror #2 has an I/O error on
* the second page, but the first page is good.
* Then the first page of the first mirror can be repaired by
* taking the first page of the second mirror, and the
* second page of the second mirror can be repaired by
* copying the contents of the 2nd page of the 1st mirror.
* One more note: if the pages of one mirror contain I/O
* errors, the checksum cannot be verified. In order to get
* the best data for repairing, the first attempt is to find
* a mirror without I/O errors and with a validated checksum.
* Only if this is not possible, the pages are picked from
* mirrors with I/O errors without considering the checksum.
* If the latter is the case, at the end, the checksum of the
* repaired area is verified in order to correctly maintain
* the statistics.
*/
sblocks_for_recheck = kzalloc(BTRFS_MAX_MIRRORS *
sizeof(*sblocks_for_recheck),
GFP_NOFS);
if (!sblocks_for_recheck) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
sctx->stat.malloc_errors++;
sctx->stat.read_errors++;
sctx->stat.uncorrectable_errors++;
spin_unlock(&sctx->stat_lock);
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_READ_ERRS);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
goto out;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/* setup the context, map the logical blocks and alloc the pages */
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
ret = scrub_setup_recheck_block(sctx, fs_info, sblock_to_check, length,
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
logical, sblocks_for_recheck);
if (ret) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
sctx->stat.read_errors++;
sctx->stat.uncorrectable_errors++;
spin_unlock(&sctx->stat_lock);
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_READ_ERRS);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
goto out;
}
BUG_ON(failed_mirror_index >= BTRFS_MAX_MIRRORS);
sblock_bad = sblocks_for_recheck + failed_mirror_index;
btrfs scrub: added unverified_errors In normal operation, scrub is reading data sequentially in large portions. In case of an i/o error, we try to find the corrupted area(s) by issuing page sized read requests. With this commit we increment the unverified_errors counter if all of the small size requests succeed. Userland patches carrying such conspicous events to the administrator should already be around. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:56:13 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/* build and submit the bios for the failed mirror, check checksums */
Btrfs: in scrub repair code, simplify alloc error handling In the scrub repair code, the code is changed to handle memory allocation errors a little bit smarter. The change is to handle it just like a read error. This simplifies the code and removes a couple of lines of code, since the code to handle read errors is there anyway. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:16:26 +00:00
scrub_recheck_block(fs_info, sblock_bad, is_metadata, have_csum,
csum, generation, sctx->csum_size);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (!sblock_bad->header_error && !sblock_bad->checksum_error &&
sblock_bad->no_io_error_seen) {
/*
* the error disappeared after reading page by page, or
* the area was part of a huge bio and other parts of the
* bio caused I/O errors, or the block layer merged several
* read requests into one and the error is caused by a
* different bio (usually one of the two latter cases is
* the cause)
*/
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
sctx->stat.unverified_errors++;
spin_unlock(&sctx->stat_lock);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (sctx->is_dev_replace)
scrub_write_block_to_dev_replace(sblock_bad);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
goto out;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (!sblock_bad->no_io_error_seen) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
sctx->stat.read_errors++;
spin_unlock(&sctx->stat_lock);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (__ratelimit(&_rs))
scrub_print_warning("i/o error", sblock_to_check);
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_READ_ERRS);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
} else if (sblock_bad->checksum_error) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
sctx->stat.csum_errors++;
spin_unlock(&sctx->stat_lock);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (__ratelimit(&_rs))
scrub_print_warning("checksum error", sblock_to_check);
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
btrfs_dev_stat_inc_and_print(dev,
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
BTRFS_DEV_STAT_CORRUPTION_ERRS);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
} else if (sblock_bad->header_error) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
sctx->stat.verify_errors++;
spin_unlock(&sctx->stat_lock);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (__ratelimit(&_rs))
scrub_print_warning("checksum/header error",
sblock_to_check);
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
if (sblock_bad->generation_error)
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
btrfs_dev_stat_inc_and_print(dev,
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
BTRFS_DEV_STAT_GENERATION_ERRS);
else
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
btrfs_dev_stat_inc_and_print(dev,
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
BTRFS_DEV_STAT_CORRUPTION_ERRS);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (sctx->readonly && !sctx->is_dev_replace)
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
goto did_not_correct_error;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (!is_metadata && !have_csum) {
struct scrub_fixup_nodatasum *fixup_nodatasum;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
nodatasum_case:
WARN_ON(sctx->is_dev_replace);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/*
* !is_metadata and !have_csum, this means that the data
* might not be COW'ed, that it might be modified
* concurrently. The general strategy to work on the
* commit root does not help in the case when COW is not
* used.
*/
fixup_nodatasum = kzalloc(sizeof(*fixup_nodatasum), GFP_NOFS);
if (!fixup_nodatasum)
goto did_not_correct_error;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
fixup_nodatasum->sctx = sctx;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
fixup_nodatasum->dev = dev;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
fixup_nodatasum->logical = logical;
fixup_nodatasum->root = fs_info->extent_root;
fixup_nodatasum->mirror_num = failed_mirror_index + 1;
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
scrub_pending_trans_workers_inc(sctx);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
fixup_nodatasum->work.func = scrub_fixup_nodatasum;
btrfs_queue_worker(&fs_info->scrub_workers,
&fixup_nodatasum->work);
goto out;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/*
* now build and submit the bios for the other mirrors, check
Btrfs: in scrub repair code, optimize the reading of mirrors In case that disk blocks need to be repaired (rewritten), the current code at first (for simplicity reasons) reads all alternate mirrors in the first step, afterwards selects the best one in a second step. This is now changed to read one alternate mirror after the other and to leave the loop early when a perfect mirror is found. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:14:21 +00:00
* checksums.
* First try to pick the mirror which is completely without I/O
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
* errors and also does not have a checksum error.
* If one is found, and if a checksum is present, the full block
* that is known to contain an error is rewritten. Afterwards
* the block is known to be corrected.
* If a mirror is found which is completely correct, and no
* checksum is present, only those pages are rewritten that had
* an I/O error in the block to be repaired, since it cannot be
* determined, which copy of the other pages is better (and it
* could happen otherwise that a correct page would be
* overwritten by a bad one).
*/
for (mirror_index = 0;
mirror_index < BTRFS_MAX_MIRRORS &&
sblocks_for_recheck[mirror_index].page_count > 0;
mirror_index++) {
Btrfs: in scrub repair code, optimize the reading of mirrors In case that disk blocks need to be repaired (rewritten), the current code at first (for simplicity reasons) reads all alternate mirrors in the first step, afterwards selects the best one in a second step. This is now changed to read one alternate mirror after the other and to leave the loop early when a perfect mirror is found. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:14:21 +00:00
struct scrub_block *sblock_other;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
Btrfs: in scrub repair code, optimize the reading of mirrors In case that disk blocks need to be repaired (rewritten), the current code at first (for simplicity reasons) reads all alternate mirrors in the first step, afterwards selects the best one in a second step. This is now changed to read one alternate mirror after the other and to leave the loop early when a perfect mirror is found. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:14:21 +00:00
if (mirror_index == failed_mirror_index)
continue;
sblock_other = sblocks_for_recheck + mirror_index;
/* build and submit the bios, check checksums */
Btrfs: in scrub repair code, simplify alloc error handling In the scrub repair code, the code is changed to handle memory allocation errors a little bit smarter. The change is to handle it just like a read error. This simplifies the code and removes a couple of lines of code, since the code to handle read errors is there anyway. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:16:26 +00:00
scrub_recheck_block(fs_info, sblock_other, is_metadata,
have_csum, csum, generation,
sctx->csum_size);
if (!sblock_other->header_error &&
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
!sblock_other->checksum_error &&
sblock_other->no_io_error_seen) {
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (sctx->is_dev_replace) {
scrub_write_block_to_dev_replace(sblock_other);
} else {
int force_write = is_metadata || have_csum;
ret = scrub_repair_block_from_good_copy(
sblock_bad, sblock_other,
force_write);
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (0 == ret)
goto corrected_error;
}
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/*
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
* for dev_replace, pick good pages and write to the target device.
*/
if (sctx->is_dev_replace) {
success = 1;
for (page_num = 0; page_num < sblock_bad->page_count;
page_num++) {
int sub_success;
sub_success = 0;
for (mirror_index = 0;
mirror_index < BTRFS_MAX_MIRRORS &&
sblocks_for_recheck[mirror_index].page_count > 0;
mirror_index++) {
struct scrub_block *sblock_other =
sblocks_for_recheck + mirror_index;
struct scrub_page *page_other =
sblock_other->pagev[page_num];
if (!page_other->io_error) {
ret = scrub_write_page_to_dev_replace(
sblock_other, page_num);
if (ret == 0) {
/* succeeded for this page */
sub_success = 1;
break;
} else {
btrfs_dev_replace_stats_inc(
&sctx->dev_root->
fs_info->dev_replace.
num_write_errors);
}
}
}
if (!sub_success) {
/*
* did not find a mirror to fetch the page
* from. scrub_write_page_to_dev_replace()
* handles this case (page->io_error), by
* filling the block with zeros before
* submitting the write request
*/
success = 0;
ret = scrub_write_page_to_dev_replace(
sblock_bad, page_num);
if (ret)
btrfs_dev_replace_stats_inc(
&sctx->dev_root->fs_info->
dev_replace.num_write_errors);
}
}
goto out;
}
/*
* for regular scrub, repair those pages that are errored.
* In case of I/O errors in the area that is supposed to be
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
* repaired, continue by picking good copies of those pages.
* Select the good pages from mirrors to rewrite bad pages from
* the area to fix. Afterwards verify the checksum of the block
* that is supposed to be repaired. This verification step is
* only done for the purpose of statistic counting and for the
* final scrub report, whether errors remain.
* A perfect algorithm could make use of the checksum and try
* all possible combinations of pages from the different mirrors
* until the checksum verification succeeds. For example, when
* the 2nd page of mirror #1 faces I/O errors, and the 2nd page
* of mirror #2 is readable but the final checksum test fails,
* then the 2nd page of mirror #3 could be tried, whether now
* the final checksum succeedes. But this would be a rare
* exception and is therefore not implemented. At least it is
* avoided that the good copy is overwritten.
* A more useful improvement would be to pick the sectors
* without I/O error based on sector sizes (512 bytes on legacy
* disks) instead of on PAGE_SIZE. Then maybe 512 byte of one
* mirror could be repaired by taking 512 byte of a different
* mirror, even if other 512 byte sectors in the same PAGE_SIZE
* area are unreadable.
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
*/
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/* can only fix I/O errors from here on */
if (sblock_bad->no_io_error_seen)
goto did_not_correct_error;
success = 1;
for (page_num = 0; page_num < sblock_bad->page_count; page_num++) {
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
struct scrub_page *page_bad = sblock_bad->pagev[page_num];
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (!page_bad->io_error)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
continue;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
for (mirror_index = 0;
mirror_index < BTRFS_MAX_MIRRORS &&
sblocks_for_recheck[mirror_index].page_count > 0;
mirror_index++) {
struct scrub_block *sblock_other = sblocks_for_recheck +
mirror_index;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
struct scrub_page *page_other = sblock_other->pagev[
page_num];
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (!page_other->io_error) {
ret = scrub_repair_page_from_good_copy(
sblock_bad, sblock_other, page_num, 0);
if (0 == ret) {
page_bad->io_error = 0;
break; /* succeeded for this page */
}
}
btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-04-09 11:27:01 +00:00
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (page_bad->io_error) {
/* did not find a mirror to copy the page from */
success = 0;
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (success) {
if (is_metadata || have_csum) {
/*
* need to verify the checksum now that all
* sectors on disk are repaired (the write
* request for data to be repaired is on its way).
* Just be lazy and use scrub_recheck_block()
* which re-reads the data before the checksum
* is verified, but most likely the data comes out
* of the page cache.
*/
Btrfs: in scrub repair code, simplify alloc error handling In the scrub repair code, the code is changed to handle memory allocation errors a little bit smarter. The change is to handle it just like a read error. This simplifies the code and removes a couple of lines of code, since the code to handle read errors is there anyway. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:16:26 +00:00
scrub_recheck_block(fs_info, sblock_bad,
is_metadata, have_csum, csum,
generation, sctx->csum_size);
if (!sblock_bad->header_error &&
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
!sblock_bad->checksum_error &&
sblock_bad->no_io_error_seen)
goto corrected_error;
else
goto did_not_correct_error;
} else {
corrected_error:
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
sctx->stat.corrected_errors++;
spin_unlock(&sctx->stat_lock);
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
printk_ratelimited_in_rcu(KERN_ERR
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
"btrfs: fixed up error at logical %llu on dev %s\n",
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
(unsigned long long)logical,
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
rcu_str_deref(dev->name));
btrfs: add readonly flag setting the readonly flag prevents writes in case an error is detected Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-23 15:34:19 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
} else {
did_not_correct_error:
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
sctx->stat.uncorrectable_errors++;
spin_unlock(&sctx->stat_lock);
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
printk_ratelimited_in_rcu(KERN_ERR
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
"btrfs: unable to fixup (regular) error at logical %llu on dev %s\n",
Btrfs: use rcu to protect device->name Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-04 18:03:51 +00:00
(unsigned long long)logical,
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
rcu_str_deref(dev->name));
btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-04-09 11:27:01 +00:00
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
out:
if (sblocks_for_recheck) {
for (mirror_index = 0; mirror_index < BTRFS_MAX_MIRRORS;
mirror_index++) {
struct scrub_block *sblock = sblocks_for_recheck +
mirror_index;
int page_index;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
for (page_index = 0; page_index < sblock->page_count;
page_index++) {
sblock->pagev[page_index]->sblock = NULL;
scrub_page_put(sblock->pagev[page_index]);
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
}
kfree(sblocks_for_recheck);
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
return 0;
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static int scrub_setup_recheck_block(struct scrub_ctx *sctx,
Btrfs: pass fs_info to btrfs_map_block() instead of mapping_tree This is required for the device replace procedure in a later step. Two calling functions also had to be changed to have the fs_info pointer: repair_io_failure() and scrub_setup_recheck_block(). Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 14:46:42 +00:00
struct btrfs_fs_info *fs_info,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
struct scrub_block *original_sblock,
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u64 length, u64 logical,
struct scrub_block *sblocks_for_recheck)
{
int page_index;
int mirror_index;
int ret;
/*
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
* note: the two members ref_count and outstanding_pages
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
* are not used (and not set) in the blocks that are used for
* the recheck procedure
*/
page_index = 0;
while (length > 0) {
u64 sublen = min_t(u64, length, PAGE_SIZE);
u64 mapped_length = sublen;
struct btrfs_bio *bbio = NULL;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/*
* with a length of PAGE_SIZE, each returned stripe
* represents one mirror
*/
Btrfs: introduce GET_READ_MIRRORS functionality for btrfs_map_block() Before this commit, btrfs_map_block() was called with REQ_WRITE in order to retrieve the list of mirrors for a disk block. This needs to be changed for the device replace procedure since it makes a difference whether you are asking for read mirrors or for locations to write to. GET_READ_MIRRORS is introduced as a new interface to call btrfs_map_block(). In the current commit, the functionality is not yet changed, only the interface for GET_READ_MIRRORS is introduced and all the places that should use this new interface are adapted. The reason that REQ_WRITE cannot be abused anymore to retrieve a list of read mirrors is that during a running dev replace operation all write requests to the live filesystem are duplicated to also write to the target drive. Keep in mind that the target disk is only partially a valid copy of the source disk while the operation is ongoing. All writes go to the target disk, but not all reads would return valid data on the target disk. Therefore it is not possible anymore to abuse a REQ_WRITE interface to find valid mirrors for a REQ_READ. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 13:16:24 +00:00
ret = btrfs_map_block(fs_info, REQ_GET_READ_MIRRORS, logical,
&mapped_length, &bbio, 0);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (ret || !bbio || mapped_length < sublen) {
kfree(bbio);
return -EIO;
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
BUG_ON(page_index >= SCRUB_PAGES_PER_RD_BIO);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
for (mirror_index = 0; mirror_index < (int)bbio->num_stripes;
mirror_index++) {
struct scrub_block *sblock;
struct scrub_page *page;
if (mirror_index >= BTRFS_MAX_MIRRORS)
continue;
sblock = sblocks_for_recheck + mirror_index;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
sblock->sctx = sctx;
page = kzalloc(sizeof(*page), GFP_NOFS);
if (!page) {
leave_nomem:
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
sctx->stat.malloc_errors++;
spin_unlock(&sctx->stat_lock);
Btrfs: fix possible memory leak in scrub_setup_recheck_block() bbio has been malloced in btrfs_map_block() and should be freed before leaving from the error handling cases. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2012-09-02 13:44:51 +00:00
kfree(bbio);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
return -ENOMEM;
}
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
scrub_page_get(page);
sblock->pagev[page_index] = page;
page->logical = logical;
page->physical = bbio->stripes[mirror_index].physical;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
BUG_ON(page_index >= original_sblock->page_count);
page->physical_for_dev_replace =
original_sblock->pagev[page_index]->
physical_for_dev_replace;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
/* for missing devices, dev->bdev is NULL */
page->dev = bbio->stripes[mirror_index].dev;
page->mirror_num = mirror_index + 1;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
sblock->page_count++;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
page->page = alloc_page(GFP_NOFS);
if (!page->page)
goto leave_nomem;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
}
kfree(bbio);
length -= sublen;
logical += sublen;
page_index++;
}
return 0;
btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-04-09 11:27:01 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/*
* this function will check the on disk data for checksum errors, header
* errors and read I/O errors. If any I/O errors happen, the exact pages
* which are errored are marked as being bad. The goal is to enable scrub
* to take those pages that are not errored from all the mirrors so that
* the pages that are errored in the just handled mirror can be repaired.
*/
Btrfs: in scrub repair code, simplify alloc error handling In the scrub repair code, the code is changed to handle memory allocation errors a little bit smarter. The change is to handle it just like a read error. This simplifies the code and removes a couple of lines of code, since the code to handle read errors is there anyway. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:16:26 +00:00
static void scrub_recheck_block(struct btrfs_fs_info *fs_info,
struct scrub_block *sblock, int is_metadata,
int have_csum, u8 *csum, u64 generation,
u16 csum_size)
btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-04-09 11:27:01 +00:00
{
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
int page_num;
btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-04-09 11:27:01 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
sblock->no_io_error_seen = 1;
sblock->header_error = 0;
sblock->checksum_error = 0;
btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-04-09 11:27:01 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
for (page_num = 0; page_num < sblock->page_count; page_num++) {
struct bio *bio;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
struct scrub_page *page = sblock->pagev[page_num];
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
DECLARE_COMPLETION_ONSTACK(complete);
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
if (page->dev->bdev == NULL) {
Btrfs: fix crash in scrub repair code when device is missing Fix that when scrub tries to repair an I/O or checksum error and one of the devices containing the mirror is missing, it crashes in bio_add_page because the bdev is a NULL pointer for missing devices. Reported-by: Marco L. Crociani <marco.crociani@gmail.com> Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-05-04 19:16:07 +00:00
page->io_error = 1;
sblock->no_io_error_seen = 0;
continue;
}
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
WARN_ON(!page->page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
bio = bio_alloc(GFP_NOFS, 1);
Btrfs: in scrub repair code, simplify alloc error handling In the scrub repair code, the code is changed to handle memory allocation errors a little bit smarter. The change is to handle it just like a read error. This simplifies the code and removes a couple of lines of code, since the code to handle read errors is there anyway. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:16:26 +00:00
if (!bio) {
page->io_error = 1;
sblock->no_io_error_seen = 0;
continue;
}
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
bio->bi_bdev = page->dev->bdev;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
bio->bi_sector = page->physical >> 9;
bio->bi_end_io = scrub_complete_bio_end_io;
bio->bi_private = &complete;
Btrfs: in scrub repair code, simplify alloc error handling In the scrub repair code, the code is changed to handle memory allocation errors a little bit smarter. The change is to handle it just like a read error. This simplifies the code and removes a couple of lines of code, since the code to handle read errors is there anyway. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:16:26 +00:00
bio_add_page(bio, page->page, PAGE_SIZE, 0);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
btrfsic_submit_bio(READ, bio);
btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-04-09 11:27:01 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/* this will also unplug the queue */
wait_for_completion(&complete);
btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-04-09 11:27:01 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
page->io_error = !test_bit(BIO_UPTODATE, &bio->bi_flags);
if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
sblock->no_io_error_seen = 0;
bio_put(bio);
}
btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-04-09 11:27:01 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (sblock->no_io_error_seen)
scrub_recheck_block_checksum(fs_info, sblock, is_metadata,
have_csum, csum, generation,
csum_size);
Btrfs: in scrub repair code, simplify alloc error handling In the scrub repair code, the code is changed to handle memory allocation errors a little bit smarter. The change is to handle it just like a read error. This simplifies the code and removes a couple of lines of code, since the code to handle read errors is there anyway. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:16:26 +00:00
return;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static void scrub_recheck_block_checksum(struct btrfs_fs_info *fs_info,
struct scrub_block *sblock,
int is_metadata, int have_csum,
const u8 *csum, u64 generation,
u16 csum_size)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
int page_num;
u8 calculated_csum[BTRFS_CSUM_SIZE];
u32 crc = ~(u32)0;
void *mapped_buffer;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
WARN_ON(!sblock->pagev[0]->page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (is_metadata) {
struct btrfs_header *h;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
mapped_buffer = kmap_atomic(sblock->pagev[0]->page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
h = (struct btrfs_header *)mapped_buffer;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
if (sblock->pagev[0]->logical != le64_to_cpu(h->bytenr) ||
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
memcmp(h->fsid, fs_info->fsid, BTRFS_UUID_SIZE) ||
memcmp(h->chunk_tree_uuid, fs_info->chunk_tree_uuid,
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
BTRFS_UUID_SIZE)) {
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
sblock->header_error = 1;
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
} else if (generation != le64_to_cpu(h->generation)) {
sblock->header_error = 1;
sblock->generation_error = 1;
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
csum = h->csum;
} else {
if (!have_csum)
return;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
mapped_buffer = kmap_atomic(sblock->pagev[0]->page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
for (page_num = 0;;) {
if (page_num == 0 && is_metadata)
Btrfs: cleanup unused arguments of btrfs_csum_data Argument 'root' is no more used in btrfs_csum_data(). Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-14 14:57:45 +00:00
crc = btrfs_csum_data(
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
((u8 *)mapped_buffer) + BTRFS_CSUM_SIZE,
crc, PAGE_SIZE - BTRFS_CSUM_SIZE);
else
Btrfs: cleanup unused arguments of btrfs_csum_data Argument 'root' is no more used in btrfs_csum_data(). Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-14 14:57:45 +00:00
crc = btrfs_csum_data(mapped_buffer, crc, PAGE_SIZE);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes and features from Chris Mason: "We've merged in the error handling patches from SuSE. These are already shipping in the sles kernel, and they give btrfs the ability to abort transactions and go readonly on errors. It involves a lot of churn as they clarify BUG_ONs, and remove the ones we now properly deal with. Josef reworked the way our metadata interacts with the page cache. page->private now points to the btrfs extent_buffer object, which makes everything faster. He changed it so we write an whole extent buffer at a time instead of allowing individual pages to go down,, which will be important for the raid5/6 code (for the 3.5 merge window ;) Josef also made us more aggressive about dropping pages for metadata blocks that were freed due to COW. Overall, our metadata caching is much faster now. We've integrated my patch for metadata bigger than the page size. This allows metadata blocks up to 64KB in size. In practice 16K and 32K seem to work best. For workloads with lots of metadata, this cuts down the size of the extent allocation tree dramatically and fragments much less. Scrub was updated to support the larger block sizes, which ended up being a fairly large change (thanks Stefan Behrens). We also have an assortment of fixes and updates, especially to the balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and the defragging code (Liu Bo)." Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to removal of the second argument to k[un]map_atomic() in commit 7ac687d9e047. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits) Btrfs: update the checks for mixed block groups with big metadata blocks Btrfs: update to the right index of defragment Btrfs: do not bother to defrag an extent if it is a big real extent Btrfs: add a check to decide if we should defrag the range Btrfs: fix recursive defragment with autodefrag option Btrfs: fix the mismatch of page->mapping Btrfs: fix race between direct io and autodefrag Btrfs: fix deadlock during allocating chunks Btrfs: show useful info in space reservation tracepoint Btrfs: don't use crc items bigger than 4KB Btrfs: flush out and clean up any block device pages during mount btrfs: disallow unequal data/metadata blocksize for mixed block groups Btrfs: enhance superblock sanity checks Btrfs: change scrub to support big blocks Btrfs: minor cleanup in scrub Btrfs: introduce common define for max number of mirrors Btrfs: fix infinite loop in btrfs_shrink_device() Btrfs: fix memory leak in resolver code Btrfs: allow dup for data chunks in mixed mode Btrfs: validate target profiles only if we are going to use them ...
2012-03-30 19:44:29 +00:00
kunmap_atomic(mapped_buffer);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
page_num++;
if (page_num >= sblock->page_count)
break;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
WARN_ON(!sblock->pagev[page_num]->page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
mapped_buffer = kmap_atomic(sblock->pagev[page_num]->page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
}
btrfs_csum_final(crc, calculated_csum);
if (memcmp(calculated_csum, csum, csum_size))
sblock->checksum_error = 1;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static void scrub_complete_bio_end_io(struct bio *bio, int err)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
complete((struct completion *)bio->bi_private);
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static int scrub_repair_block_from_good_copy(struct scrub_block *sblock_bad,
struct scrub_block *sblock_good,
int force_write)
{
int page_num;
int ret = 0;
btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-04-09 11:27:01 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
for (page_num = 0; page_num < sblock_bad->page_count; page_num++) {
int ret_sub;
btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-04-09 11:27:01 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
ret_sub = scrub_repair_page_from_good_copy(sblock_bad,
sblock_good,
page_num,
force_write);
if (ret_sub)
ret = ret_sub;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
return ret;
}
static int scrub_repair_page_from_good_copy(struct scrub_block *sblock_bad,
struct scrub_block *sblock_good,
int page_num, int force_write)
{
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
struct scrub_page *page_bad = sblock_bad->pagev[page_num];
struct scrub_page *page_good = sblock_good->pagev[page_num];
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
BUG_ON(page_bad->page == NULL);
BUG_ON(page_good->page == NULL);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (force_write || sblock_bad->header_error ||
sblock_bad->checksum_error || page_bad->io_error) {
struct bio *bio;
int ret;
DECLARE_COMPLETION_ONSTACK(complete);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (!page_bad->dev->bdev) {
printk_ratelimited(KERN_WARNING
"btrfs: scrub_repair_page_from_good_copy(bdev == NULL) is unexpected!\n");
return -EIO;
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
bio = bio_alloc(GFP_NOFS, 1);
Btrfs: check return value of bio_alloc() properly bio_alloc() has the possibility of returning NULL. So, it is necessary to check the return value. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-04-12 20:03:56 +00:00
if (!bio)
return -EIO;
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
bio->bi_bdev = page_bad->dev->bdev;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
bio->bi_sector = page_bad->physical >> 9;
bio->bi_end_io = scrub_complete_bio_end_io;
bio->bi_private = &complete;
ret = bio_add_page(bio, page_good->page, PAGE_SIZE, 0);
if (PAGE_SIZE != ret) {
bio_put(bio);
return -EIO;
btrfs scrub: added unverified_errors In normal operation, scrub is reading data sequentially in large portions. In case of an i/o error, we try to find the corrupted area(s) by issuing page sized read requests. With this commit we increment the unverified_errors counter if all of the small size requests succeed. Userland patches carrying such conspicous events to the administrator should already be around. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:56:13 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
btrfsic_submit_bio(WRITE, bio);
/* this will also unplug the queue */
wait_for_completion(&complete);
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
if (!bio_flagged(bio, BIO_UPTODATE)) {
btrfs_dev_stat_inc_and_print(page_bad->dev,
BTRFS_DEV_STAT_WRITE_ERRS);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
btrfs_dev_replace_stats_inc(
&sblock_bad->sctx->dev_root->fs_info->
dev_replace.num_write_errors);
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
bio_put(bio);
return -EIO;
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
bio_put(bio);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
return 0;
}
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
static void scrub_write_block_to_dev_replace(struct scrub_block *sblock)
{
int page_num;
for (page_num = 0; page_num < sblock->page_count; page_num++) {
int ret;
ret = scrub_write_page_to_dev_replace(sblock, page_num);
if (ret)
btrfs_dev_replace_stats_inc(
&sblock->sctx->dev_root->fs_info->dev_replace.
num_write_errors);
}
}
static int scrub_write_page_to_dev_replace(struct scrub_block *sblock,
int page_num)
{
struct scrub_page *spage = sblock->pagev[page_num];
BUG_ON(spage->page == NULL);
if (spage->io_error) {
void *mapped_buffer = kmap_atomic(spage->page);
memset(mapped_buffer, 0, PAGE_CACHE_SIZE);
flush_dcache_page(spage->page);
kunmap_atomic(mapped_buffer);
}
return scrub_add_page_to_wr_bio(sblock->sctx, spage);
}
static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx,
struct scrub_page *spage)
{
struct scrub_wr_ctx *wr_ctx = &sctx->wr_ctx;
struct scrub_bio *sbio;
int ret;
mutex_lock(&wr_ctx->wr_lock);
again:
if (!wr_ctx->wr_curr_bio) {
wr_ctx->wr_curr_bio = kzalloc(sizeof(*wr_ctx->wr_curr_bio),
GFP_NOFS);
if (!wr_ctx->wr_curr_bio) {
mutex_unlock(&wr_ctx->wr_lock);
return -ENOMEM;
}
wr_ctx->wr_curr_bio->sctx = sctx;
wr_ctx->wr_curr_bio->page_count = 0;
}
sbio = wr_ctx->wr_curr_bio;
if (sbio->page_count == 0) {
struct bio *bio;
sbio->physical = spage->physical_for_dev_replace;
sbio->logical = spage->logical;
sbio->dev = wr_ctx->tgtdev;
bio = sbio->bio;
if (!bio) {
bio = bio_alloc(GFP_NOFS, wr_ctx->pages_per_wr_bio);
if (!bio) {
mutex_unlock(&wr_ctx->wr_lock);
return -ENOMEM;
}
sbio->bio = bio;
}
bio->bi_private = sbio;
bio->bi_end_io = scrub_wr_bio_end_io;
bio->bi_bdev = sbio->dev->bdev;
bio->bi_sector = sbio->physical >> 9;
sbio->err = 0;
} else if (sbio->physical + sbio->page_count * PAGE_SIZE !=
spage->physical_for_dev_replace ||
sbio->logical + sbio->page_count * PAGE_SIZE !=
spage->logical) {
scrub_wr_submit(sctx);
goto again;
}
ret = bio_add_page(sbio->bio, spage->page, PAGE_SIZE, 0);
if (ret != PAGE_SIZE) {
if (sbio->page_count < 1) {
bio_put(sbio->bio);
sbio->bio = NULL;
mutex_unlock(&wr_ctx->wr_lock);
return -EIO;
}
scrub_wr_submit(sctx);
goto again;
}
sbio->pagev[sbio->page_count] = spage;
scrub_page_get(spage);
sbio->page_count++;
if (sbio->page_count == wr_ctx->pages_per_wr_bio)
scrub_wr_submit(sctx);
mutex_unlock(&wr_ctx->wr_lock);
return 0;
}
static void scrub_wr_submit(struct scrub_ctx *sctx)
{
struct scrub_wr_ctx *wr_ctx = &sctx->wr_ctx;
struct scrub_bio *sbio;
if (!wr_ctx->wr_curr_bio)
return;
sbio = wr_ctx->wr_curr_bio;
wr_ctx->wr_curr_bio = NULL;
WARN_ON(!sbio->bio->bi_bdev);
scrub_pending_bio_inc(sctx);
/* process all writes in a single worker thread. Then the block layer
* orders the requests before sending them to the driver which
* doubled the write performance on spinning disks when measured
* with Linux 3.5 */
btrfsic_submit_bio(WRITE, sbio->bio);
}
static void scrub_wr_bio_end_io(struct bio *bio, int err)
{
struct scrub_bio *sbio = bio->bi_private;
struct btrfs_fs_info *fs_info = sbio->dev->dev_root->fs_info;
sbio->err = err;
sbio->bio = bio;
sbio->work.func = scrub_wr_bio_end_io_worker;
btrfs_queue_worker(&fs_info->scrub_wr_completion_workers, &sbio->work);
}
static void scrub_wr_bio_end_io_worker(struct btrfs_work *work)
{
struct scrub_bio *sbio = container_of(work, struct scrub_bio, work);
struct scrub_ctx *sctx = sbio->sctx;
int i;
WARN_ON(sbio->page_count > SCRUB_PAGES_PER_WR_BIO);
if (sbio->err) {
struct btrfs_dev_replace *dev_replace =
&sbio->sctx->dev_root->fs_info->dev_replace;
for (i = 0; i < sbio->page_count; i++) {
struct scrub_page *spage = sbio->pagev[i];
spage->io_error = 1;
btrfs_dev_replace_stats_inc(&dev_replace->
num_write_errors);
}
}
for (i = 0; i < sbio->page_count; i++)
scrub_page_put(sbio->pagev[i]);
bio_put(sbio->bio);
kfree(sbio);
scrub_pending_bio_dec(sctx);
}
static int scrub_checksum(struct scrub_block *sblock)
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
{
u64 flags;
int ret;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
WARN_ON(sblock->page_count < 1);
flags = sblock->pagev[0]->flags;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
ret = 0;
if (flags & BTRFS_EXTENT_FLAG_DATA)
ret = scrub_checksum_data(sblock);
else if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK)
ret = scrub_checksum_tree_block(sblock);
else if (flags & BTRFS_EXTENT_FLAG_SUPER)
(void)scrub_checksum_super(sblock);
else
WARN_ON(1);
if (ret)
scrub_handle_errored_block(sblock);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
return ret;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static int scrub_checksum_data(struct scrub_block *sblock)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx = sblock->sctx;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
u8 csum[BTRFS_CSUM_SIZE];
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u8 *on_disk_csum;
struct page *page;
void *buffer;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
u32 crc = ~(u32)0;
int fail = 0;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u64 len;
int index;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
BUG_ON(sblock->page_count < 1);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
if (!sblock->pagev[0]->have_csum)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
return 0;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
on_disk_csum = sblock->pagev[0]->csum;
page = sblock->pagev[0]->page;
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes and features from Chris Mason: "We've merged in the error handling patches from SuSE. These are already shipping in the sles kernel, and they give btrfs the ability to abort transactions and go readonly on errors. It involves a lot of churn as they clarify BUG_ONs, and remove the ones we now properly deal with. Josef reworked the way our metadata interacts with the page cache. page->private now points to the btrfs extent_buffer object, which makes everything faster. He changed it so we write an whole extent buffer at a time instead of allowing individual pages to go down,, which will be important for the raid5/6 code (for the 3.5 merge window ;) Josef also made us more aggressive about dropping pages for metadata blocks that were freed due to COW. Overall, our metadata caching is much faster now. We've integrated my patch for metadata bigger than the page size. This allows metadata blocks up to 64KB in size. In practice 16K and 32K seem to work best. For workloads with lots of metadata, this cuts down the size of the extent allocation tree dramatically and fragments much less. Scrub was updated to support the larger block sizes, which ended up being a fairly large change (thanks Stefan Behrens). We also have an assortment of fixes and updates, especially to the balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and the defragging code (Liu Bo)." Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to removal of the second argument to k[un]map_atomic() in commit 7ac687d9e047. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits) Btrfs: update the checks for mixed block groups with big metadata blocks Btrfs: update to the right index of defragment Btrfs: do not bother to defrag an extent if it is a big real extent Btrfs: add a check to decide if we should defrag the range Btrfs: fix recursive defragment with autodefrag option Btrfs: fix the mismatch of page->mapping Btrfs: fix race between direct io and autodefrag Btrfs: fix deadlock during allocating chunks Btrfs: show useful info in space reservation tracepoint Btrfs: don't use crc items bigger than 4KB Btrfs: flush out and clean up any block device pages during mount btrfs: disallow unequal data/metadata blocksize for mixed block groups Btrfs: enhance superblock sanity checks Btrfs: change scrub to support big blocks Btrfs: minor cleanup in scrub Btrfs: introduce common define for max number of mirrors Btrfs: fix infinite loop in btrfs_shrink_device() Btrfs: fix memory leak in resolver code Btrfs: allow dup for data chunks in mixed mode Btrfs: validate target profiles only if we are going to use them ...
2012-03-30 19:44:29 +00:00
buffer = kmap_atomic(page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
len = sctx->sectorsize;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
index = 0;
for (;;) {
u64 l = min_t(u64, len, PAGE_SIZE);
Btrfs: cleanup unused arguments of btrfs_csum_data Argument 'root' is no more used in btrfs_csum_data(). Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-14 14:57:45 +00:00
crc = btrfs_csum_data(buffer, crc, l);
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes and features from Chris Mason: "We've merged in the error handling patches from SuSE. These are already shipping in the sles kernel, and they give btrfs the ability to abort transactions and go readonly on errors. It involves a lot of churn as they clarify BUG_ONs, and remove the ones we now properly deal with. Josef reworked the way our metadata interacts with the page cache. page->private now points to the btrfs extent_buffer object, which makes everything faster. He changed it so we write an whole extent buffer at a time instead of allowing individual pages to go down,, which will be important for the raid5/6 code (for the 3.5 merge window ;) Josef also made us more aggressive about dropping pages for metadata blocks that were freed due to COW. Overall, our metadata caching is much faster now. We've integrated my patch for metadata bigger than the page size. This allows metadata blocks up to 64KB in size. In practice 16K and 32K seem to work best. For workloads with lots of metadata, this cuts down the size of the extent allocation tree dramatically and fragments much less. Scrub was updated to support the larger block sizes, which ended up being a fairly large change (thanks Stefan Behrens). We also have an assortment of fixes and updates, especially to the balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and the defragging code (Liu Bo)." Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to removal of the second argument to k[un]map_atomic() in commit 7ac687d9e047. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits) Btrfs: update the checks for mixed block groups with big metadata blocks Btrfs: update to the right index of defragment Btrfs: do not bother to defrag an extent if it is a big real extent Btrfs: add a check to decide if we should defrag the range Btrfs: fix recursive defragment with autodefrag option Btrfs: fix the mismatch of page->mapping Btrfs: fix race between direct io and autodefrag Btrfs: fix deadlock during allocating chunks Btrfs: show useful info in space reservation tracepoint Btrfs: don't use crc items bigger than 4KB Btrfs: flush out and clean up any block device pages during mount btrfs: disallow unequal data/metadata blocksize for mixed block groups Btrfs: enhance superblock sanity checks Btrfs: change scrub to support big blocks Btrfs: minor cleanup in scrub Btrfs: introduce common define for max number of mirrors Btrfs: fix infinite loop in btrfs_shrink_device() Btrfs: fix memory leak in resolver code Btrfs: allow dup for data chunks in mixed mode Btrfs: validate target profiles only if we are going to use them ...
2012-03-30 19:44:29 +00:00
kunmap_atomic(buffer);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
len -= l;
if (len == 0)
break;
index++;
BUG_ON(index >= sblock->page_count);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
BUG_ON(!sblock->pagev[index]->page);
page = sblock->pagev[index]->page;
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes and features from Chris Mason: "We've merged in the error handling patches from SuSE. These are already shipping in the sles kernel, and they give btrfs the ability to abort transactions and go readonly on errors. It involves a lot of churn as they clarify BUG_ONs, and remove the ones we now properly deal with. Josef reworked the way our metadata interacts with the page cache. page->private now points to the btrfs extent_buffer object, which makes everything faster. He changed it so we write an whole extent buffer at a time instead of allowing individual pages to go down,, which will be important for the raid5/6 code (for the 3.5 merge window ;) Josef also made us more aggressive about dropping pages for metadata blocks that were freed due to COW. Overall, our metadata caching is much faster now. We've integrated my patch for metadata bigger than the page size. This allows metadata blocks up to 64KB in size. In practice 16K and 32K seem to work best. For workloads with lots of metadata, this cuts down the size of the extent allocation tree dramatically and fragments much less. Scrub was updated to support the larger block sizes, which ended up being a fairly large change (thanks Stefan Behrens). We also have an assortment of fixes and updates, especially to the balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and the defragging code (Liu Bo)." Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to removal of the second argument to k[un]map_atomic() in commit 7ac687d9e047. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits) Btrfs: update the checks for mixed block groups with big metadata blocks Btrfs: update to the right index of defragment Btrfs: do not bother to defrag an extent if it is a big real extent Btrfs: add a check to decide if we should defrag the range Btrfs: fix recursive defragment with autodefrag option Btrfs: fix the mismatch of page->mapping Btrfs: fix race between direct io and autodefrag Btrfs: fix deadlock during allocating chunks Btrfs: show useful info in space reservation tracepoint Btrfs: don't use crc items bigger than 4KB Btrfs: flush out and clean up any block device pages during mount btrfs: disallow unequal data/metadata blocksize for mixed block groups Btrfs: enhance superblock sanity checks Btrfs: change scrub to support big blocks Btrfs: minor cleanup in scrub Btrfs: introduce common define for max number of mirrors Btrfs: fix infinite loop in btrfs_shrink_device() Btrfs: fix memory leak in resolver code Btrfs: allow dup for data chunks in mixed mode Btrfs: validate target profiles only if we are going to use them ...
2012-03-30 19:44:29 +00:00
buffer = kmap_atomic(page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
btrfs_csum_final(crc, csum);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
if (memcmp(csum, on_disk_csum, sctx->csum_size))
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
fail = 1;
return fail;
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static int scrub_checksum_tree_block(struct scrub_block *sblock)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx = sblock->sctx;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct btrfs_header *h;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_root *root = sctx->dev_root;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct btrfs_fs_info *fs_info = root->fs_info;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u8 calculated_csum[BTRFS_CSUM_SIZE];
u8 on_disk_csum[BTRFS_CSUM_SIZE];
struct page *page;
void *mapped_buffer;
u64 mapped_size;
void *p;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
u32 crc = ~(u32)0;
int fail = 0;
int crc_fail = 0;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u64 len;
int index;
BUG_ON(sblock->page_count < 1);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
page = sblock->pagev[0]->page;
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes and features from Chris Mason: "We've merged in the error handling patches from SuSE. These are already shipping in the sles kernel, and they give btrfs the ability to abort transactions and go readonly on errors. It involves a lot of churn as they clarify BUG_ONs, and remove the ones we now properly deal with. Josef reworked the way our metadata interacts with the page cache. page->private now points to the btrfs extent_buffer object, which makes everything faster. He changed it so we write an whole extent buffer at a time instead of allowing individual pages to go down,, which will be important for the raid5/6 code (for the 3.5 merge window ;) Josef also made us more aggressive about dropping pages for metadata blocks that were freed due to COW. Overall, our metadata caching is much faster now. We've integrated my patch for metadata bigger than the page size. This allows metadata blocks up to 64KB in size. In practice 16K and 32K seem to work best. For workloads with lots of metadata, this cuts down the size of the extent allocation tree dramatically and fragments much less. Scrub was updated to support the larger block sizes, which ended up being a fairly large change (thanks Stefan Behrens). We also have an assortment of fixes and updates, especially to the balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and the defragging code (Liu Bo)." Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to removal of the second argument to k[un]map_atomic() in commit 7ac687d9e047. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits) Btrfs: update the checks for mixed block groups with big metadata blocks Btrfs: update to the right index of defragment Btrfs: do not bother to defrag an extent if it is a big real extent Btrfs: add a check to decide if we should defrag the range Btrfs: fix recursive defragment with autodefrag option Btrfs: fix the mismatch of page->mapping Btrfs: fix race between direct io and autodefrag Btrfs: fix deadlock during allocating chunks Btrfs: show useful info in space reservation tracepoint Btrfs: don't use crc items bigger than 4KB Btrfs: flush out and clean up any block device pages during mount btrfs: disallow unequal data/metadata blocksize for mixed block groups Btrfs: enhance superblock sanity checks Btrfs: change scrub to support big blocks Btrfs: minor cleanup in scrub Btrfs: introduce common define for max number of mirrors Btrfs: fix infinite loop in btrfs_shrink_device() Btrfs: fix memory leak in resolver code Btrfs: allow dup for data chunks in mixed mode Btrfs: validate target profiles only if we are going to use them ...
2012-03-30 19:44:29 +00:00
mapped_buffer = kmap_atomic(page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
h = (struct btrfs_header *)mapped_buffer;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
memcpy(on_disk_csum, h->csum, sctx->csum_size);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/*
* we don't use the getter functions here, as we
* a) don't have an extent buffer and
* b) the page is already kmapped
*/
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
if (sblock->pagev[0]->logical != le64_to_cpu(h->bytenr))
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
++fail;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
if (sblock->pagev[0]->generation != le64_to_cpu(h->generation))
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
++fail;
if (memcmp(h->fsid, fs_info->fsid, BTRFS_UUID_SIZE))
++fail;
if (memcmp(h->chunk_tree_uuid, fs_info->chunk_tree_uuid,
BTRFS_UUID_SIZE))
++fail;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
WARN_ON(sctx->nodesize != sctx->leafsize);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
len = sctx->nodesize - BTRFS_CSUM_SIZE;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
mapped_size = PAGE_SIZE - BTRFS_CSUM_SIZE;
p = ((u8 *)mapped_buffer) + BTRFS_CSUM_SIZE;
index = 0;
for (;;) {
u64 l = min_t(u64, len, mapped_size);
Btrfs: cleanup unused arguments of btrfs_csum_data Argument 'root' is no more used in btrfs_csum_data(). Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-14 14:57:45 +00:00
crc = btrfs_csum_data(p, crc, l);
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes and features from Chris Mason: "We've merged in the error handling patches from SuSE. These are already shipping in the sles kernel, and they give btrfs the ability to abort transactions and go readonly on errors. It involves a lot of churn as they clarify BUG_ONs, and remove the ones we now properly deal with. Josef reworked the way our metadata interacts with the page cache. page->private now points to the btrfs extent_buffer object, which makes everything faster. He changed it so we write an whole extent buffer at a time instead of allowing individual pages to go down,, which will be important for the raid5/6 code (for the 3.5 merge window ;) Josef also made us more aggressive about dropping pages for metadata blocks that were freed due to COW. Overall, our metadata caching is much faster now. We've integrated my patch for metadata bigger than the page size. This allows metadata blocks up to 64KB in size. In practice 16K and 32K seem to work best. For workloads with lots of metadata, this cuts down the size of the extent allocation tree dramatically and fragments much less. Scrub was updated to support the larger block sizes, which ended up being a fairly large change (thanks Stefan Behrens). We also have an assortment of fixes and updates, especially to the balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and the defragging code (Liu Bo)." Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to removal of the second argument to k[un]map_atomic() in commit 7ac687d9e047. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits) Btrfs: update the checks for mixed block groups with big metadata blocks Btrfs: update to the right index of defragment Btrfs: do not bother to defrag an extent if it is a big real extent Btrfs: add a check to decide if we should defrag the range Btrfs: fix recursive defragment with autodefrag option Btrfs: fix the mismatch of page->mapping Btrfs: fix race between direct io and autodefrag Btrfs: fix deadlock during allocating chunks Btrfs: show useful info in space reservation tracepoint Btrfs: don't use crc items bigger than 4KB Btrfs: flush out and clean up any block device pages during mount btrfs: disallow unequal data/metadata blocksize for mixed block groups Btrfs: enhance superblock sanity checks Btrfs: change scrub to support big blocks Btrfs: minor cleanup in scrub Btrfs: introduce common define for max number of mirrors Btrfs: fix infinite loop in btrfs_shrink_device() Btrfs: fix memory leak in resolver code Btrfs: allow dup for data chunks in mixed mode Btrfs: validate target profiles only if we are going to use them ...
2012-03-30 19:44:29 +00:00
kunmap_atomic(mapped_buffer);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
len -= l;
if (len == 0)
break;
index++;
BUG_ON(index >= sblock->page_count);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
BUG_ON(!sblock->pagev[index]->page);
page = sblock->pagev[index]->page;
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes and features from Chris Mason: "We've merged in the error handling patches from SuSE. These are already shipping in the sles kernel, and they give btrfs the ability to abort transactions and go readonly on errors. It involves a lot of churn as they clarify BUG_ONs, and remove the ones we now properly deal with. Josef reworked the way our metadata interacts with the page cache. page->private now points to the btrfs extent_buffer object, which makes everything faster. He changed it so we write an whole extent buffer at a time instead of allowing individual pages to go down,, which will be important for the raid5/6 code (for the 3.5 merge window ;) Josef also made us more aggressive about dropping pages for metadata blocks that were freed due to COW. Overall, our metadata caching is much faster now. We've integrated my patch for metadata bigger than the page size. This allows metadata blocks up to 64KB in size. In practice 16K and 32K seem to work best. For workloads with lots of metadata, this cuts down the size of the extent allocation tree dramatically and fragments much less. Scrub was updated to support the larger block sizes, which ended up being a fairly large change (thanks Stefan Behrens). We also have an assortment of fixes and updates, especially to the balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and the defragging code (Liu Bo)." Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to removal of the second argument to k[un]map_atomic() in commit 7ac687d9e047. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits) Btrfs: update the checks for mixed block groups with big metadata blocks Btrfs: update to the right index of defragment Btrfs: do not bother to defrag an extent if it is a big real extent Btrfs: add a check to decide if we should defrag the range Btrfs: fix recursive defragment with autodefrag option Btrfs: fix the mismatch of page->mapping Btrfs: fix race between direct io and autodefrag Btrfs: fix deadlock during allocating chunks Btrfs: show useful info in space reservation tracepoint Btrfs: don't use crc items bigger than 4KB Btrfs: flush out and clean up any block device pages during mount btrfs: disallow unequal data/metadata blocksize for mixed block groups Btrfs: enhance superblock sanity checks Btrfs: change scrub to support big blocks Btrfs: minor cleanup in scrub Btrfs: introduce common define for max number of mirrors Btrfs: fix infinite loop in btrfs_shrink_device() Btrfs: fix memory leak in resolver code Btrfs: allow dup for data chunks in mixed mode Btrfs: validate target profiles only if we are going to use them ...
2012-03-30 19:44:29 +00:00
mapped_buffer = kmap_atomic(page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
mapped_size = PAGE_SIZE;
p = mapped_buffer;
}
btrfs_csum_final(crc, calculated_csum);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
if (memcmp(calculated_csum, on_disk_csum, sctx->csum_size))
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
++crc_fail;
return fail || crc_fail;
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static int scrub_checksum_super(struct scrub_block *sblock)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
struct btrfs_super_block *s;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx = sblock->sctx;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_root *root = sctx->dev_root;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct btrfs_fs_info *fs_info = root->fs_info;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u8 calculated_csum[BTRFS_CSUM_SIZE];
u8 on_disk_csum[BTRFS_CSUM_SIZE];
struct page *page;
void *mapped_buffer;
u64 mapped_size;
void *p;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
u32 crc = ~(u32)0;
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
int fail_gen = 0;
int fail_cor = 0;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u64 len;
int index;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
BUG_ON(sblock->page_count < 1);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
page = sblock->pagev[0]->page;
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes and features from Chris Mason: "We've merged in the error handling patches from SuSE. These are already shipping in the sles kernel, and they give btrfs the ability to abort transactions and go readonly on errors. It involves a lot of churn as they clarify BUG_ONs, and remove the ones we now properly deal with. Josef reworked the way our metadata interacts with the page cache. page->private now points to the btrfs extent_buffer object, which makes everything faster. He changed it so we write an whole extent buffer at a time instead of allowing individual pages to go down,, which will be important for the raid5/6 code (for the 3.5 merge window ;) Josef also made us more aggressive about dropping pages for metadata blocks that were freed due to COW. Overall, our metadata caching is much faster now. We've integrated my patch for metadata bigger than the page size. This allows metadata blocks up to 64KB in size. In practice 16K and 32K seem to work best. For workloads with lots of metadata, this cuts down the size of the extent allocation tree dramatically and fragments much less. Scrub was updated to support the larger block sizes, which ended up being a fairly large change (thanks Stefan Behrens). We also have an assortment of fixes and updates, especially to the balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and the defragging code (Liu Bo)." Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to removal of the second argument to k[un]map_atomic() in commit 7ac687d9e047. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits) Btrfs: update the checks for mixed block groups with big metadata blocks Btrfs: update to the right index of defragment Btrfs: do not bother to defrag an extent if it is a big real extent Btrfs: add a check to decide if we should defrag the range Btrfs: fix recursive defragment with autodefrag option Btrfs: fix the mismatch of page->mapping Btrfs: fix race between direct io and autodefrag Btrfs: fix deadlock during allocating chunks Btrfs: show useful info in space reservation tracepoint Btrfs: don't use crc items bigger than 4KB Btrfs: flush out and clean up any block device pages during mount btrfs: disallow unequal data/metadata blocksize for mixed block groups Btrfs: enhance superblock sanity checks Btrfs: change scrub to support big blocks Btrfs: minor cleanup in scrub Btrfs: introduce common define for max number of mirrors Btrfs: fix infinite loop in btrfs_shrink_device() Btrfs: fix memory leak in resolver code Btrfs: allow dup for data chunks in mixed mode Btrfs: validate target profiles only if we are going to use them ...
2012-03-30 19:44:29 +00:00
mapped_buffer = kmap_atomic(page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
s = (struct btrfs_super_block *)mapped_buffer;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
memcpy(on_disk_csum, s->csum, sctx->csum_size);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
if (sblock->pagev[0]->logical != le64_to_cpu(s->bytenr))
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
++fail_cor;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
if (sblock->pagev[0]->generation != le64_to_cpu(s->generation))
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
++fail_gen;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
if (memcmp(s->fsid, fs_info->fsid, BTRFS_UUID_SIZE))
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
++fail_cor;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
len = BTRFS_SUPER_INFO_SIZE - BTRFS_CSUM_SIZE;
mapped_size = PAGE_SIZE - BTRFS_CSUM_SIZE;
p = ((u8 *)mapped_buffer) + BTRFS_CSUM_SIZE;
index = 0;
for (;;) {
u64 l = min_t(u64, len, mapped_size);
Btrfs: cleanup unused arguments of btrfs_csum_data Argument 'root' is no more used in btrfs_csum_data(). Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-14 14:57:45 +00:00
crc = btrfs_csum_data(p, crc, l);
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes and features from Chris Mason: "We've merged in the error handling patches from SuSE. These are already shipping in the sles kernel, and they give btrfs the ability to abort transactions and go readonly on errors. It involves a lot of churn as they clarify BUG_ONs, and remove the ones we now properly deal with. Josef reworked the way our metadata interacts with the page cache. page->private now points to the btrfs extent_buffer object, which makes everything faster. He changed it so we write an whole extent buffer at a time instead of allowing individual pages to go down,, which will be important for the raid5/6 code (for the 3.5 merge window ;) Josef also made us more aggressive about dropping pages for metadata blocks that were freed due to COW. Overall, our metadata caching is much faster now. We've integrated my patch for metadata bigger than the page size. This allows metadata blocks up to 64KB in size. In practice 16K and 32K seem to work best. For workloads with lots of metadata, this cuts down the size of the extent allocation tree dramatically and fragments much less. Scrub was updated to support the larger block sizes, which ended up being a fairly large change (thanks Stefan Behrens). We also have an assortment of fixes and updates, especially to the balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and the defragging code (Liu Bo)." Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to removal of the second argument to k[un]map_atomic() in commit 7ac687d9e047. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits) Btrfs: update the checks for mixed block groups with big metadata blocks Btrfs: update to the right index of defragment Btrfs: do not bother to defrag an extent if it is a big real extent Btrfs: add a check to decide if we should defrag the range Btrfs: fix recursive defragment with autodefrag option Btrfs: fix the mismatch of page->mapping Btrfs: fix race between direct io and autodefrag Btrfs: fix deadlock during allocating chunks Btrfs: show useful info in space reservation tracepoint Btrfs: don't use crc items bigger than 4KB Btrfs: flush out and clean up any block device pages during mount btrfs: disallow unequal data/metadata blocksize for mixed block groups Btrfs: enhance superblock sanity checks Btrfs: change scrub to support big blocks Btrfs: minor cleanup in scrub Btrfs: introduce common define for max number of mirrors Btrfs: fix infinite loop in btrfs_shrink_device() Btrfs: fix memory leak in resolver code Btrfs: allow dup for data chunks in mixed mode Btrfs: validate target profiles only if we are going to use them ...
2012-03-30 19:44:29 +00:00
kunmap_atomic(mapped_buffer);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
len -= l;
if (len == 0)
break;
index++;
BUG_ON(index >= sblock->page_count);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
BUG_ON(!sblock->pagev[index]->page);
page = sblock->pagev[index]->page;
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes and features from Chris Mason: "We've merged in the error handling patches from SuSE. These are already shipping in the sles kernel, and they give btrfs the ability to abort transactions and go readonly on errors. It involves a lot of churn as they clarify BUG_ONs, and remove the ones we now properly deal with. Josef reworked the way our metadata interacts with the page cache. page->private now points to the btrfs extent_buffer object, which makes everything faster. He changed it so we write an whole extent buffer at a time instead of allowing individual pages to go down,, which will be important for the raid5/6 code (for the 3.5 merge window ;) Josef also made us more aggressive about dropping pages for metadata blocks that were freed due to COW. Overall, our metadata caching is much faster now. We've integrated my patch for metadata bigger than the page size. This allows metadata blocks up to 64KB in size. In practice 16K and 32K seem to work best. For workloads with lots of metadata, this cuts down the size of the extent allocation tree dramatically and fragments much less. Scrub was updated to support the larger block sizes, which ended up being a fairly large change (thanks Stefan Behrens). We also have an assortment of fixes and updates, especially to the balancing code (Ilya Dryomov), the back ref walker (Jan Schmidt) and the defragging code (Liu Bo)." Fixed up trivial conflicts in fs/btrfs/scrub.c that were just due to removal of the second argument to k[un]map_atomic() in commit 7ac687d9e047. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (75 commits) Btrfs: update the checks for mixed block groups with big metadata blocks Btrfs: update to the right index of defragment Btrfs: do not bother to defrag an extent if it is a big real extent Btrfs: add a check to decide if we should defrag the range Btrfs: fix recursive defragment with autodefrag option Btrfs: fix the mismatch of page->mapping Btrfs: fix race between direct io and autodefrag Btrfs: fix deadlock during allocating chunks Btrfs: show useful info in space reservation tracepoint Btrfs: don't use crc items bigger than 4KB Btrfs: flush out and clean up any block device pages during mount btrfs: disallow unequal data/metadata blocksize for mixed block groups Btrfs: enhance superblock sanity checks Btrfs: change scrub to support big blocks Btrfs: minor cleanup in scrub Btrfs: introduce common define for max number of mirrors Btrfs: fix infinite loop in btrfs_shrink_device() Btrfs: fix memory leak in resolver code Btrfs: allow dup for data chunks in mixed mode Btrfs: validate target profiles only if we are going to use them ...
2012-03-30 19:44:29 +00:00
mapped_buffer = kmap_atomic(page);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
mapped_size = PAGE_SIZE;
p = mapped_buffer;
}
btrfs_csum_final(crc, calculated_csum);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
if (memcmp(calculated_csum, on_disk_csum, sctx->csum_size))
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
++fail_cor;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
if (fail_cor + fail_gen) {
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/*
* if we find an error in a super block, we just report it.
* They will get written with the next transaction commit
* anyway
*/
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
++sctx->stat.super_errors;
spin_unlock(&sctx->stat_lock);
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
if (fail_cor)
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
btrfs_dev_stat_inc_and_print(sblock->pagev[0]->dev,
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
BTRFS_DEV_STAT_CORRUPTION_ERRS);
else
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
btrfs_dev_stat_inc_and_print(sblock->pagev[0]->dev,
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
BTRFS_DEV_STAT_GENERATION_ERRS);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: add device counters for detected IO and checksum errors The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
2012-05-25 14:06:08 +00:00
return fail_cor + fail_gen;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static void scrub_block_get(struct scrub_block *sblock)
{
atomic_inc(&sblock->ref_count);
}
static void scrub_block_put(struct scrub_block *sblock)
{
if (atomic_dec_and_test(&sblock->ref_count)) {
int i;
for (i = 0; i < sblock->page_count; i++)
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
scrub_page_put(sblock->pagev[i]);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
kfree(sblock);
}
}
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
static void scrub_page_get(struct scrub_page *spage)
{
atomic_inc(&spage->ref_count);
}
static void scrub_page_put(struct scrub_page *spage)
{
if (atomic_dec_and_test(&spage->ref_count)) {
if (spage->page)
__free_page(spage->page);
kfree(spage);
}
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static void scrub_submit(struct scrub_ctx *sctx)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
struct scrub_bio *sbio;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
if (sctx->curr == -1)
Btrfs: minor cleanup in scrub Just a minor cleanup commit in preparation for the big block changes. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:26 +00:00
return;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sbio = sctx->bios[sctx->curr];
sctx->curr = -1;
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
scrub_pending_bio_inc(sctx);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (!sbio->bio->bi_bdev) {
/*
* this case should not happen. If btrfs_map_block() is
* wrong, it could happen for dev-replace operations on
* missing devices when no mirrors are available, but in
* this case it should already fail the mount.
* This case is handled correctly (but _very_ slowly).
*/
printk_ratelimited(KERN_WARNING
"btrfs: scrub_submit(bio bdev == NULL) is unexpected!\n");
bio_endio(sbio->bio, -EIO);
} else {
btrfsic_submit_bio(READ, sbio->bio);
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
static int scrub_add_page_to_rd_bio(struct scrub_ctx *sctx,
struct scrub_page *spage)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
struct scrub_block *sblock = spage->sblock;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct scrub_bio *sbio;
Btrfs: handle bio_add_page failure gracefully in scrub Currently scrub fails with ENOMEM when bio_add_page fails. Unfortunately dm based targets accept only one page per bio, thus making scrub always fails. This patch just submits the current bio when an error is encountered and starts a new one. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-11-11 13:17:10 +00:00
int ret;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
again:
/*
* grab a fresh bio or wait for one to become available
*/
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
while (sctx->curr == -1) {
spin_lock(&sctx->list_lock);
sctx->curr = sctx->first_free;
if (sctx->curr != -1) {
sctx->first_free = sctx->bios[sctx->curr]->next_free;
sctx->bios[sctx->curr]->next_free = -1;
sctx->bios[sctx->curr]->page_count = 0;
spin_unlock(&sctx->list_lock);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
} else {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_unlock(&sctx->list_lock);
wait_event(sctx->list_wait, sctx->first_free != -1);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sbio = sctx->bios[sctx->curr];
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (sbio->page_count == 0) {
Btrfs: handle bio_add_page failure gracefully in scrub Currently scrub fails with ENOMEM when bio_add_page fails. Unfortunately dm based targets accept only one page per bio, thus making scrub always fails. This patch just submits the current bio when an error is encountered and starts a new one. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-11-11 13:17:10 +00:00
struct bio *bio;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
sbio->physical = spage->physical;
sbio->logical = spage->logical;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
sbio->dev = spage->dev;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
bio = sbio->bio;
if (!bio) {
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
bio = bio_alloc(GFP_NOFS, sctx->pages_per_rd_bio);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (!bio)
return -ENOMEM;
sbio->bio = bio;
}
Btrfs: handle bio_add_page failure gracefully in scrub Currently scrub fails with ENOMEM when bio_add_page fails. Unfortunately dm based targets accept only one page per bio, thus making scrub always fails. This patch just submits the current bio when an error is encountered and starts a new one. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-11-11 13:17:10 +00:00
bio->bi_private = sbio;
bio->bi_end_io = scrub_bio_end_io;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
bio->bi_bdev = sbio->dev->bdev;
bio->bi_sector = sbio->physical >> 9;
Btrfs: handle bio_add_page failure gracefully in scrub Currently scrub fails with ENOMEM when bio_add_page fails. Unfortunately dm based targets accept only one page per bio, thus making scrub always fails. This patch just submits the current bio when an error is encountered and starts a new one. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-11-11 13:17:10 +00:00
sbio->err = 0;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
} else if (sbio->physical + sbio->page_count * PAGE_SIZE !=
spage->physical ||
sbio->logical + sbio->page_count * PAGE_SIZE !=
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
spage->logical ||
sbio->dev != spage->dev) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
scrub_submit(sctx);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
goto again;
}
Btrfs: handle bio_add_page failure gracefully in scrub Currently scrub fails with ENOMEM when bio_add_page fails. Unfortunately dm based targets accept only one page per bio, thus making scrub always fails. This patch just submits the current bio when an error is encountered and starts a new one. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-11-11 13:17:10 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
sbio->pagev[sbio->page_count] = spage;
ret = bio_add_page(sbio->bio, spage->page, PAGE_SIZE, 0);
if (ret != PAGE_SIZE) {
if (sbio->page_count < 1) {
bio_put(sbio->bio);
sbio->bio = NULL;
return -EIO;
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
scrub_submit(sctx);
Btrfs: handle bio_add_page failure gracefully in scrub Currently scrub fails with ENOMEM when bio_add_page fails. Unfortunately dm based targets accept only one page per bio, thus making scrub always fails. This patch just submits the current bio when an error is encountered and starts a new one. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-11-11 13:17:10 +00:00
goto again;
}
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
scrub_block_get(sblock); /* one for the page added to the bio */
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
atomic_inc(&sblock->outstanding_pages);
sbio->page_count++;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (sbio->page_count == sctx->pages_per_rd_bio)
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
scrub_submit(sctx);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
return 0;
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static int scrub_pages(struct scrub_ctx *sctx, u64 logical, u64 len,
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
u64 physical, struct btrfs_device *dev, u64 flags,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
u64 gen, int mirror_num, u8 *csum, int force,
u64 physical_for_dev_replace)
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
{
struct scrub_block *sblock;
int index;
sblock = kzalloc(sizeof(*sblock), GFP_NOFS);
if (!sblock) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
sctx->stat.malloc_errors++;
spin_unlock(&sctx->stat_lock);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
return -ENOMEM;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
/* one ref inside this function, plus one for each page added to
* a bio later on */
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
atomic_set(&sblock->ref_count, 1);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sblock->sctx = sctx;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
sblock->no_io_error_seen = 1;
for (index = 0; len > 0; index++) {
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
struct scrub_page *spage;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u64 l = min_t(u64, len, PAGE_SIZE);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
spage = kzalloc(sizeof(*spage), GFP_NOFS);
if (!spage) {
leave_nomem:
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
sctx->stat.malloc_errors++;
spin_unlock(&sctx->stat_lock);
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
scrub_block_put(sblock);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
return -ENOMEM;
}
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
BUG_ON(index >= SCRUB_MAX_PAGES_PER_BLOCK);
scrub_page_get(spage);
sblock->pagev[index] = spage;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
spage->sblock = sblock;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
spage->dev = dev;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
spage->flags = flags;
spage->generation = gen;
spage->logical = logical;
spage->physical = physical;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
spage->physical_for_dev_replace = physical_for_dev_replace;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
spage->mirror_num = mirror_num;
if (csum) {
spage->have_csum = 1;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
memcpy(spage->csum, csum, sctx->csum_size);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
} else {
spage->have_csum = 0;
}
sblock->page_count++;
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
spage->page = alloc_page(GFP_NOFS);
if (!spage->page)
goto leave_nomem;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
len -= l;
logical += l;
physical += l;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
physical_for_dev_replace += l;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
}
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
WARN_ON(sblock->page_count == 0);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
for (index = 0; index < sblock->page_count; index++) {
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
struct scrub_page *spage = sblock->pagev[index];
btrfs: scrub: don't reuse bios and pages The current scrub implementation reuses bios and pages as often as possible, allocating them only on start and releasing them when finished. This leads to more problems with the block layer than it's worth. The elevator gets confused when there are more pages added to the bio than bi_size suggests. This patch completely rips out the reuse of bios and pages and allocates them freshly for each submit. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Maosn <chris.mason@oracle.com>
2011-05-28 19:57:55 +00:00
int ret;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
ret = scrub_add_page_to_rd_bio(sctx, spage);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (ret) {
scrub_block_put(sblock);
btrfs: scrub: don't reuse bios and pages The current scrub implementation reuses bios and pages as often as possible, allocating them only on start and releasing them when finished. This leads to more problems with the block layer than it's worth. The elevator gets confused when there are more pages added to the bio than bi_size suggests. This patch completely rips out the reuse of bios and pages and allocates them freshly for each submit. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Maosn <chris.mason@oracle.com>
2011-05-28 19:57:55 +00:00
return ret;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
}
btrfs: scrub: don't reuse bios and pages The current scrub implementation reuses bios and pages as often as possible, allocating them only on start and releasing them when finished. This leads to more problems with the block layer than it's worth. The elevator gets confused when there are more pages added to the bio than bi_size suggests. This patch completely rips out the reuse of bios and pages and allocates them freshly for each submit. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Maosn <chris.mason@oracle.com>
2011-05-28 19:57:55 +00:00
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (force)
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
scrub_submit(sctx);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/* last one frees, either here or in bio completion for last page */
scrub_block_put(sblock);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
return 0;
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
static void scrub_bio_end_io(struct bio *bio, int err)
{
struct scrub_bio *sbio = bio->bi_private;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_fs_info *fs_info = sbio->dev->dev_root->fs_info;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
sbio->err = err;
sbio->bio = bio;
btrfs_queue_worker(&fs_info->scrub_workers, &sbio->work);
}
static void scrub_bio_end_io_worker(struct btrfs_work *work)
{
struct scrub_bio *sbio = container_of(work, struct scrub_bio, work);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx = sbio->sctx;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
int i;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
BUG_ON(sbio->page_count > SCRUB_PAGES_PER_RD_BIO);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
if (sbio->err) {
for (i = 0; i < sbio->page_count; i++) {
struct scrub_page *spage = sbio->pagev[i];
spage->io_error = 1;
spage->sblock->no_io_error_seen = 0;
}
}
/* now complete the scrub_block items that have all pages completed */
for (i = 0; i < sbio->page_count; i++) {
struct scrub_page *spage = sbio->pagev[i];
struct scrub_block *sblock = spage->sblock;
if (atomic_dec_and_test(&sblock->outstanding_pages))
scrub_block_complete(sblock);
scrub_block_put(sblock);
}
bio_put(sbio->bio);
sbio->bio = NULL;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->list_lock);
sbio->next_free = sctx->first_free;
sctx->first_free = sbio->index;
spin_unlock(&sctx->list_lock);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (sctx->is_dev_replace &&
atomic_read(&sctx->wr_ctx.flush_all_writes)) {
mutex_lock(&sctx->wr_ctx.wr_lock);
scrub_wr_submit(sctx);
mutex_unlock(&sctx->wr_ctx.wr_lock);
}
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
scrub_pending_bio_dec(sctx);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
}
static void scrub_block_complete(struct scrub_block *sblock)
{
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (!sblock->no_io_error_seen) {
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
scrub_handle_errored_block(sblock);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
} else {
/*
* if has checksum error, write via repair mechanism in
* dev replace case, otherwise write here in dev replace
* case.
*/
if (!scrub_checksum(sblock) && sblock->sctx->is_dev_replace)
scrub_write_block_to_dev_replace(sblock);
}
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static int scrub_find_csum(struct scrub_ctx *sctx, u64 logical, u64 len,
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
u8 *csum)
{
struct btrfs_ordered_sum *sum = NULL;
int ret = 0;
unsigned long i;
unsigned long num_sectors;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
while (!list_empty(&sctx->csum_list)) {
sum = list_first_entry(&sctx->csum_list,
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct btrfs_ordered_sum, list);
if (sum->bytenr > logical)
return 0;
if (sum->bytenr + sum->len > logical)
break;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
++sctx->stat.csum_discards;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
list_del(&sum->list);
kfree(sum);
sum = NULL;
}
if (!sum)
return 0;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
num_sectors = sum->len / sctx->sectorsize;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
for (i = 0; i < num_sectors; ++i) {
if (sum->sums[i].bytenr == logical) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
memcpy(csum, &sum->sums[i].sum, sctx->csum_size);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
ret = 1;
break;
}
}
if (ret && i == num_sectors - 1) {
list_del(&sum->list);
kfree(sum);
}
return ret;
}
/* scrub extent tries to collect up to 64 kB for each bio */
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static int scrub_extent(struct scrub_ctx *sctx, u64 logical, u64 len,
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
u64 physical, struct btrfs_device *dev, u64 flags,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
u64 gen, int mirror_num, u64 physical_for_dev_replace)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
int ret;
u8 csum[BTRFS_CSUM_SIZE];
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u32 blocksize;
if (flags & BTRFS_EXTENT_FLAG_DATA) {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
blocksize = sctx->sectorsize;
spin_lock(&sctx->stat_lock);
sctx->stat.data_extents_scrubbed++;
sctx->stat.data_bytes_scrubbed += len;
spin_unlock(&sctx->stat_lock);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
} else if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
WARN_ON(sctx->nodesize != sctx->leafsize);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
blocksize = sctx->nodesize;
spin_lock(&sctx->stat_lock);
sctx->stat.tree_extents_scrubbed++;
sctx->stat.tree_bytes_scrubbed += len;
spin_unlock(&sctx->stat_lock);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
} else {
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
blocksize = sctx->sectorsize;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
WARN_ON(1);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
while (len) {
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
u64 l = min_t(u64, len, blocksize);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
int have_csum = 0;
if (flags & BTRFS_EXTENT_FLAG_DATA) {
/* push csums to sbio */
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
have_csum = scrub_find_csum(sctx, logical, l, csum);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
if (have_csum == 0)
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
++sctx->stat.no_csum;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (sctx->is_dev_replace && !have_csum) {
ret = copy_nocow_pages(sctx, logical, l,
mirror_num,
physical_for_dev_replace);
goto behind_scrub_pages;
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
ret = scrub_pages(sctx, logical, l, physical, dev, flags, gen,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
mirror_num, have_csum ? csum : NULL, 0,
physical_for_dev_replace);
behind_scrub_pages:
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
if (ret)
return ret;
len -= l;
logical += l;
physical += l;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
physical_for_dev_replace += l;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
return 0;
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static noinline_for_stack int scrub_stripe(struct scrub_ctx *sctx,
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct map_lookup *map,
struct btrfs_device *scrub_dev,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
int num, u64 base, u64 length,
int is_dev_replace)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
struct btrfs_path *path;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_fs_info *fs_info = sctx->dev_root->fs_info;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct btrfs_root *root = fs_info->extent_root;
struct btrfs_root *csum_root = fs_info->csum_root;
struct btrfs_extent_item *extent;
btrfs: scrub: add explicit plugging With the removal of the implicit plugging scrub ends up doing more and smaller I/O than necessary. This patch adds explicit plugging per chunk. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-28 20:58:38 +00:00
struct blk_plug plug;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
u64 flags;
int ret;
int slot;
u64 nstripes;
struct extent_buffer *l;
struct btrfs_key key;
u64 physical;
u64 logical;
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
u64 logic_end;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
u64 generation;
btrfs scrub: use int for mirror_num, not u64 the rest of the code uses int mirror_num, and so should scrub Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-17 13:55:21 +00:00
int mirror_num;
btrfs: use readahead API for scrub Scrub uses a simple tree-enumeration to bring the relevant portions of the extent- and csum-tree into the page cache before starting the scrub-I/O. This is now replaced by using the new readahead-API. During readahead the scrub is being accounted as paused, so it won't hold off transaction commits. This change raises the average disk bandwith utilisation on my test volume from 70% to 90%. On another volume, the time for a test run went down from 89s to 43s. Changes v5: - reada1/2 are now of type struct reada_control * Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-10 10:39:23 +00:00
struct reada_control *reada1;
struct reada_control *reada2;
struct btrfs_key key_start;
struct btrfs_key key_end;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
u64 increment = map->stripe_len;
u64 offset;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
u64 extent_logical;
u64 extent_physical;
u64 extent_len;
struct btrfs_device *extent_dev;
int extent_mirror_num;
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
int stop_loop;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: RAID5 and RAID6 This builds on David Woodhouse's original Btrfs raid5/6 implementation. The code has changed quite a bit, blame Chris Mason for any bugs. Read/modify/write is done after the higher levels of the filesystem have prepared a given bio. This means the higher layers are not responsible for building full stripes, and they don't need to query for the topology of the extents that may get allocated during delayed allocation runs. It also means different files can easily share the same stripe. But, it does expose us to incorrect parity if we crash or lose power while doing a read/modify/write cycle. This will be addressed in a later commit. Scrub is unable to repair crc errors on raid5/6 chunks. Discard does not work on raid5/6 (yet) The stripe size is fixed at 64KiB per disk. This will be tunable in a later commit. Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-01-29 23:40:14 +00:00
if (map->type & (BTRFS_BLOCK_GROUP_RAID5 |
BTRFS_BLOCK_GROUP_RAID6)) {
if (num >= nr_data_stripes(map)) {
return 0;
}
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
nstripes = length;
offset = 0;
do_div(nstripes, map->stripe_len);
if (map->type & BTRFS_BLOCK_GROUP_RAID0) {
offset = map->stripe_len * num;
increment = map->stripe_len * map->num_stripes;
btrfs scrub: bugfix: mirror_num off by one Fix the mirror_num determination in scrub_stripe. The rest of the scrub code did not use mirror_num for anything important and that error went unnoticed. The nodatasum fixup patch of this set depends on a correct mirror_num. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:56:54 +00:00
mirror_num = 1;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
} else if (map->type & BTRFS_BLOCK_GROUP_RAID10) {
int factor = map->num_stripes / map->sub_stripes;
offset = map->stripe_len * (num / map->sub_stripes);
increment = map->stripe_len * factor;
btrfs scrub: bugfix: mirror_num off by one Fix the mirror_num determination in scrub_stripe. The rest of the scrub code did not use mirror_num for anything important and that error went unnoticed. The nodatasum fixup patch of this set depends on a correct mirror_num. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:56:54 +00:00
mirror_num = num % map->sub_stripes + 1;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
} else if (map->type & BTRFS_BLOCK_GROUP_RAID1) {
increment = map->stripe_len;
btrfs scrub: bugfix: mirror_num off by one Fix the mirror_num determination in scrub_stripe. The rest of the scrub code did not use mirror_num for anything important and that error went unnoticed. The nodatasum fixup patch of this set depends on a correct mirror_num. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:56:54 +00:00
mirror_num = num % map->num_stripes + 1;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
} else if (map->type & BTRFS_BLOCK_GROUP_DUP) {
increment = map->stripe_len;
btrfs scrub: bugfix: mirror_num off by one Fix the mirror_num determination in scrub_stripe. The rest of the scrub code did not use mirror_num for anything important and that error went unnoticed. The nodatasum fixup patch of this set depends on a correct mirror_num. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:56:54 +00:00
mirror_num = num % map->num_stripes + 1;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
} else {
increment = map->stripe_len;
btrfs scrub: bugfix: mirror_num off by one Fix the mirror_num determination in scrub_stripe. The rest of the scrub code did not use mirror_num for anything important and that error went unnoticed. The nodatasum fixup patch of this set depends on a correct mirror_num. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 17:56:54 +00:00
mirror_num = 1;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/*
* work on commit root. The related disk blocks are static as
* long as COW is applied. This means, it is save to rewrite
* them to repair disk errors without any race conditions
*/
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
path->search_commit_root = 1;
path->skip_locking = 1;
/*
btrfs: use readahead API for scrub Scrub uses a simple tree-enumeration to bring the relevant portions of the extent- and csum-tree into the page cache before starting the scrub-I/O. This is now replaced by using the new readahead-API. During readahead the scrub is being accounted as paused, so it won't hold off transaction commits. This change raises the average disk bandwith utilisation on my test volume from 70% to 90%. On another volume, the time for a test run went down from 89s to 43s. Changes v5: - reada1/2 are now of type struct reada_control * Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-10 10:39:23 +00:00
* trigger the readahead for extent tree csum tree and wait for
* completion. During readahead, the scrub is officially paused
* to not hold off transaction commits
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
*/
logical = base + offset;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
wait_event(sctx->list_wait,
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
atomic_read(&sctx->bios_in_flight) == 0);
btrfs: use readahead API for scrub Scrub uses a simple tree-enumeration to bring the relevant portions of the extent- and csum-tree into the page cache before starting the scrub-I/O. This is now replaced by using the new readahead-API. During readahead the scrub is being accounted as paused, so it won't hold off transaction commits. This change raises the average disk bandwith utilisation on my test volume from 70% to 90%. On another volume, the time for a test run went down from 89s to 43s. Changes v5: - reada1/2 are now of type struct reada_control * Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-10 10:39:23 +00:00
atomic_inc(&fs_info->scrubs_paused);
wake_up(&fs_info->scrub_pause_wait);
/* FIXME it might be better to start readahead at commit root */
key_start.objectid = logical;
key_start.type = BTRFS_EXTENT_ITEM_KEY;
key_start.offset = (u64)0;
key_end.objectid = base + offset + nstripes * increment;
Btrfs: add a incompatible format change for smaller metadata extent refs We currently store the first key of the tree block inside the reference for the tree block in the extent tree. This takes up quite a bit of space. Make a new key type for metadata which holds the level as the offset and completely removes storing the btrfs_tree_block_info inside the extent ref. This reduces the size from 51 bytes to 33 bytes per extent reference for each tree block. In practice this results in a 30-35% decrease in the size of our extent tree, which means we COW less and can keep more of the extent tree in memory which makes our heavy metadata operations go much faster. This is not an automatic format change, you must enable it at mkfs time or with btrfstune. This patch deals with having metadata stored as either the old format or the new format so it is easy to convert. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-07 19:22:04 +00:00
key_end.type = BTRFS_METADATA_ITEM_KEY;
key_end.offset = (u64)-1;
btrfs: use readahead API for scrub Scrub uses a simple tree-enumeration to bring the relevant portions of the extent- and csum-tree into the page cache before starting the scrub-I/O. This is now replaced by using the new readahead-API. During readahead the scrub is being accounted as paused, so it won't hold off transaction commits. This change raises the average disk bandwith utilisation on my test volume from 70% to 90%. On another volume, the time for a test run went down from 89s to 43s. Changes v5: - reada1/2 are now of type struct reada_control * Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-10 10:39:23 +00:00
reada1 = btrfs_reada_add(root, &key_start, &key_end);
key_start.objectid = BTRFS_EXTENT_CSUM_OBJECTID;
key_start.type = BTRFS_EXTENT_CSUM_KEY;
key_start.offset = logical;
key_end.objectid = BTRFS_EXTENT_CSUM_OBJECTID;
key_end.type = BTRFS_EXTENT_CSUM_KEY;
key_end.offset = base + offset + nstripes * increment;
reada2 = btrfs_reada_add(csum_root, &key_start, &key_end);
if (!IS_ERR(reada1))
btrfs_reada_wait(reada1);
if (!IS_ERR(reada2))
btrfs_reada_wait(reada2);
mutex_lock(&fs_info->scrub_lock);
while (atomic_read(&fs_info->scrub_pause_req)) {
mutex_unlock(&fs_info->scrub_lock);
wait_event(fs_info->scrub_pause_wait,
atomic_read(&fs_info->scrub_pause_req) == 0);
mutex_lock(&fs_info->scrub_lock);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
btrfs: use readahead API for scrub Scrub uses a simple tree-enumeration to bring the relevant portions of the extent- and csum-tree into the page cache before starting the scrub-I/O. This is now replaced by using the new readahead-API. During readahead the scrub is being accounted as paused, so it won't hold off transaction commits. This change raises the average disk bandwith utilisation on my test volume from 70% to 90%. On another volume, the time for a test run went down from 89s to 43s. Changes v5: - reada1/2 are now of type struct reada_control * Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-10 10:39:23 +00:00
atomic_dec(&fs_info->scrubs_paused);
mutex_unlock(&fs_info->scrub_lock);
wake_up(&fs_info->scrub_pause_wait);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/*
* collect all data csums for the stripe to avoid seeking during
* the scrub. This might currently (crc32) end up to be about 1MB
*/
btrfs: scrub: add explicit plugging With the removal of the implicit plugging scrub ends up doing more and smaller I/O than necessary. This patch adds explicit plugging per chunk. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-28 20:58:38 +00:00
blk_start_plug(&plug);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/*
* now find all extents for each stripe and scrub them
*/
btrfs: use readahead API for scrub Scrub uses a simple tree-enumeration to bring the relevant portions of the extent- and csum-tree into the page cache before starting the scrub-I/O. This is now replaced by using the new readahead-API. During readahead the scrub is being accounted as paused, so it won't hold off transaction commits. This change raises the average disk bandwith utilisation on my test volume from 70% to 90%. On another volume, the time for a test run went down from 89s to 43s. Changes v5: - reada1/2 are now of type struct reada_control * Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-10 10:39:23 +00:00
logical = base + offset;
physical = map->stripes[num].physical;
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
logic_end = logical + increment * nstripes;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
ret = 0;
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
while (logical < logic_end) {
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/*
* canceled?
*/
if (atomic_read(&fs_info->scrub_cancel_req) ||
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
atomic_read(&sctx->cancel_req)) {
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
ret = -ECANCELED;
goto out;
}
/*
* check to see if we have to pause
*/
if (atomic_read(&fs_info->scrub_pause_req)) {
/* push queued extents */
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
atomic_set(&sctx->wr_ctx.flush_all_writes, 1);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
scrub_submit(sctx);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
mutex_lock(&sctx->wr_ctx.wr_lock);
scrub_wr_submit(sctx);
mutex_unlock(&sctx->wr_ctx.wr_lock);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
wait_event(sctx->list_wait,
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
atomic_read(&sctx->bios_in_flight) == 0);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
atomic_set(&sctx->wr_ctx.flush_all_writes, 0);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
atomic_inc(&fs_info->scrubs_paused);
wake_up(&fs_info->scrub_pause_wait);
mutex_lock(&fs_info->scrub_lock);
while (atomic_read(&fs_info->scrub_pause_req)) {
mutex_unlock(&fs_info->scrub_lock);
wait_event(fs_info->scrub_pause_wait,
atomic_read(&fs_info->scrub_pause_req) == 0);
mutex_lock(&fs_info->scrub_lock);
}
atomic_dec(&fs_info->scrubs_paused);
mutex_unlock(&fs_info->scrub_lock);
wake_up(&fs_info->scrub_pause_wait);
}
key.objectid = logical;
key.type = BTRFS_EXTENT_ITEM_KEY;
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
key.offset = (u64)-1;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
goto out;
Btrfs: add a incompatible format change for smaller metadata extent refs We currently store the first key of the tree block inside the reference for the tree block in the extent tree. This takes up quite a bit of space. Make a new key type for metadata which holds the level as the offset and completely removes storing the btrfs_tree_block_info inside the extent ref. This reduces the size from 51 bytes to 33 bytes per extent reference for each tree block. In practice this results in a 30-35% decrease in the size of our extent tree, which means we COW less and can keep more of the extent tree in memory which makes our heavy metadata operations go much faster. This is not an automatic format change, you must enable it at mkfs time or with btrfstune. This patch deals with having metadata stored as either the old format or the new format so it is easy to convert. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-07 19:22:04 +00:00
btrfs: scrub: errors in tree enumeration due to the semantics of btrfs_search_slot the path can point to an invalid slot when ret > 0. This condition went unnoticed, which in turn could have led to an incomplete scrubbing. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-03 08:09:26 +00:00
if (ret > 0) {
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
ret = btrfs_previous_item(root, path, 0,
BTRFS_EXTENT_ITEM_KEY);
if (ret < 0)
goto out;
btrfs: scrub: errors in tree enumeration due to the semantics of btrfs_search_slot the path can point to an invalid slot when ret > 0. This condition went unnoticed, which in turn could have led to an incomplete scrubbing. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-03 08:09:26 +00:00
if (ret > 0) {
/* there's no smaller item, so stick with the
* larger one */
btrfs_release_path(path);
ret = btrfs_search_slot(NULL, root, &key,
path, 0, 0);
if (ret < 0)
goto out;
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
stop_loop = 0;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
while (1) {
Btrfs: add a incompatible format change for smaller metadata extent refs We currently store the first key of the tree block inside the reference for the tree block in the extent tree. This takes up quite a bit of space. Make a new key type for metadata which holds the level as the offset and completely removes storing the btrfs_tree_block_info inside the extent ref. This reduces the size from 51 bytes to 33 bytes per extent reference for each tree block. In practice this results in a 30-35% decrease in the size of our extent tree, which means we COW less and can keep more of the extent tree in memory which makes our heavy metadata operations go much faster. This is not an automatic format change, you must enable it at mkfs time or with btrfstune. This patch deals with having metadata stored as either the old format or the new format so it is easy to convert. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-07 19:22:04 +00:00
u64 bytes;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
l = path->nodes[0];
slot = path->slots[0];
if (slot >= btrfs_header_nritems(l)) {
ret = btrfs_next_leaf(root, path);
if (ret == 0)
continue;
if (ret < 0)
goto out;
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
stop_loop = 1;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
break;
}
btrfs_item_key_to_cpu(l, &key, slot);
Btrfs: add a incompatible format change for smaller metadata extent refs We currently store the first key of the tree block inside the reference for the tree block in the extent tree. This takes up quite a bit of space. Make a new key type for metadata which holds the level as the offset and completely removes storing the btrfs_tree_block_info inside the extent ref. This reduces the size from 51 bytes to 33 bytes per extent reference for each tree block. In practice this results in a 30-35% decrease in the size of our extent tree, which means we COW less and can keep more of the extent tree in memory which makes our heavy metadata operations go much faster. This is not an automatic format change, you must enable it at mkfs time or with btrfstune. This patch deals with having metadata stored as either the old format or the new format so it is easy to convert. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-03-07 19:22:04 +00:00
if (key.type == BTRFS_METADATA_ITEM_KEY)
bytes = root->leafsize;
else
bytes = key.offset;
if (key.objectid + bytes <= logical)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
goto next;
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
if (key.type != BTRFS_EXTENT_ITEM_KEY &&
key.type != BTRFS_METADATA_ITEM_KEY)
goto next;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
if (key.objectid >= logical + map->stripe_len) {
/* out of this device extent */
if (key.objectid >= logic_end)
stop_loop = 1;
break;
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
extent = btrfs_item_ptr(l, slot,
struct btrfs_extent_item);
flags = btrfs_extent_flags(l, extent);
generation = btrfs_extent_generation(l, extent);
if (key.objectid < logical &&
(flags & BTRFS_EXTENT_FLAG_TREE_BLOCK)) {
printk(KERN_ERR
"btrfs scrub: tree block %llu spanning "
"stripes, ignored. logical=%llu\n",
(unsigned long long)key.objectid,
(unsigned long long)logical);
goto next;
}
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
again:
extent_logical = key.objectid;
extent_len = bytes;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/*
* trim extent to this stripe
*/
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
if (extent_logical < logical) {
extent_len -= logical - extent_logical;
extent_logical = logical;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
if (extent_logical + extent_len >
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
logical + map->stripe_len) {
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
extent_len = logical + map->stripe_len -
extent_logical;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
extent_physical = extent_logical - logical + physical;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
extent_dev = scrub_dev;
extent_mirror_num = mirror_num;
if (is_dev_replace)
scrub_remap_extent(fs_info, extent_logical,
extent_len, &extent_physical,
&extent_dev,
&extent_mirror_num);
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
ret = btrfs_lookup_csums_range(csum_root, logical,
logical + map->stripe_len - 1,
&sctx->csum_list, 1);
if (ret)
goto out;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
ret = scrub_extent(sctx, extent_logical, extent_len,
extent_physical, extent_dev, flags,
generation, extent_mirror_num,
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
extent_physical);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
if (ret)
goto out;
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
if (extent_logical + extent_len <
key.objectid + bytes) {
logical += increment;
physical += map->stripe_len;
if (logical < key.objectid + bytes) {
cond_resched();
goto again;
}
if (logical >= logic_end) {
stop_loop = 1;
break;
}
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
next:
path->slots[0]++;
}
Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/arne/btrfs-unstable-arne into inode_numbers Conflicts: fs/btrfs/Makefile fs/btrfs/ctree.h fs/btrfs/volumes.h Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-23 10:30:52 +00:00
btrfs_release_path(path);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
logical += increment;
physical += map->stripe_len;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
if (stop_loop)
sctx->stat.last_physical = map->stripes[num].physical +
length;
else
sctx->stat.last_physical = physical;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_unlock(&sctx->stat_lock);
Btrfs: improve the loop of scrub_stripe 1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-04-27 02:56:57 +00:00
if (stop_loop)
break;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
out:
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
/* push queued extents */
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
scrub_submit(sctx);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
mutex_lock(&sctx->wr_ctx.wr_lock);
scrub_wr_submit(sctx);
mutex_unlock(&sctx->wr_ctx.wr_lock);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
btrfs: scrub: add explicit plugging With the removal of the implicit plugging scrub ends up doing more and smaller I/O than necessary. This patch adds explicit plugging per chunk. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-28 20:58:38 +00:00
blk_finish_plug(&plug);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
btrfs_free_path(path);
return ret < 0 ? ret : 0;
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static noinline_for_stack int scrub_chunk(struct scrub_ctx *sctx,
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_device *scrub_dev,
u64 chunk_tree, u64 chunk_objectid,
u64 chunk_offset, u64 length,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
u64 dev_offset, int is_dev_replace)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
struct btrfs_mapping_tree *map_tree =
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
&sctx->dev_root->fs_info->mapping_tree;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct map_lookup *map;
struct extent_map *em;
int i;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
int ret = 0;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
read_lock(&map_tree->map_tree.lock);
em = lookup_extent_mapping(&map_tree->map_tree, chunk_offset, 1);
read_unlock(&map_tree->map_tree.lock);
if (!em)
return -EINVAL;
map = (struct map_lookup *)em->bdev;
if (em->start != chunk_offset)
goto out;
if (em->len < length)
goto out;
for (i = 0; i < map->num_stripes; ++i) {
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
if (map->stripes[i].dev->bdev == scrub_dev->bdev &&
btrfs: don't check DUP chunks twice Because scrub enumerates the dev extent tree to find the chunks to scrub, it currently finds each DUP chunk twice and also scrubs it twice. This patch makes sure that scrub_chunk only checks that part of the chunk the dev extent has been found for. This only changes the behaviour for DUP chunks. Reported-and-tested-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Arne Jansen <sensille@gmx.net>
2012-02-09 14:09:02 +00:00
map->stripes[i].physical == dev_offset) {
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
ret = scrub_stripe(sctx, map, scrub_dev, i,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
chunk_offset, length,
is_dev_replace);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
if (ret)
goto out;
}
}
out:
free_extent_map(em);
return ret;
}
static noinline_for_stack
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
int scrub_enumerate_chunks(struct scrub_ctx *sctx,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
struct btrfs_device *scrub_dev, u64 start, u64 end,
int is_dev_replace)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
struct btrfs_dev_extent *dev_extent = NULL;
struct btrfs_path *path;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_root *root = sctx->dev_root;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
struct btrfs_fs_info *fs_info = root->fs_info;
u64 length;
u64 chunk_tree;
u64 chunk_objectid;
u64 chunk_offset;
int ret;
int slot;
struct extent_buffer *l;
struct btrfs_key key;
struct btrfs_key found_key;
struct btrfs_block_group_cache *cache;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
path->reada = 2;
path->search_commit_root = 1;
path->skip_locking = 1;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
key.objectid = scrub_dev->devid;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
key.offset = 0ull;
key.type = BTRFS_DEV_EXTENT_KEY;
while (1) {
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
btrfs: scrub: errors in tree enumeration due to the semantics of btrfs_search_slot the path can point to an invalid slot when ret > 0. This condition went unnoticed, which in turn could have led to an incomplete scrubbing. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-03 08:09:26 +00:00
break;
if (ret > 0) {
if (path->slots[0] >=
btrfs_header_nritems(path->nodes[0])) {
ret = btrfs_next_leaf(root, path);
if (ret)
break;
}
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
l = path->nodes[0];
slot = path->slots[0];
btrfs_item_key_to_cpu(l, &found_key, slot);
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
if (found_key.objectid != scrub_dev->devid)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
break;
btrfs: scrub: errors in tree enumeration due to the semantics of btrfs_search_slot the path can point to an invalid slot when ret > 0. This condition went unnoticed, which in turn could have led to an incomplete scrubbing. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-03 08:09:26 +00:00
if (btrfs_key_type(&found_key) != BTRFS_DEV_EXTENT_KEY)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
break;
if (found_key.offset >= end)
break;
if (found_key.offset < key.offset)
break;
dev_extent = btrfs_item_ptr(l, slot, struct btrfs_dev_extent);
length = btrfs_dev_extent_length(l, dev_extent);
if (found_key.offset + length <= start) {
key.offset = found_key.offset + length;
Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/arne/btrfs-unstable-arne into inode_numbers Conflicts: fs/btrfs/Makefile fs/btrfs/ctree.h fs/btrfs/volumes.h Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-23 10:30:52 +00:00
btrfs_release_path(path);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
continue;
}
chunk_tree = btrfs_dev_extent_chunk_tree(l, dev_extent);
chunk_objectid = btrfs_dev_extent_chunk_objectid(l, dev_extent);
chunk_offset = btrfs_dev_extent_chunk_offset(l, dev_extent);
/*
* get a reference on the corresponding block group to prevent
* the chunk from going away while we scrub it
*/
cache = btrfs_lookup_block_group(fs_info, chunk_offset);
if (!cache) {
ret = -ENOENT;
btrfs: scrub: errors in tree enumeration due to the semantics of btrfs_search_slot the path can point to an invalid slot when ret > 0. This condition went unnoticed, which in turn could have led to an incomplete scrubbing. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-03 08:09:26 +00:00
break;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
dev_replace->cursor_right = found_key.offset + length;
dev_replace->cursor_left = found_key.offset;
dev_replace->item_needs_writeback = 1;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
ret = scrub_chunk(sctx, scrub_dev, chunk_tree, chunk_objectid,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
chunk_offset, length, found_key.offset,
is_dev_replace);
/*
* flush, submit all pending read and write bios, afterwards
* wait for them.
* Note that in the dev replace case, a read request causes
* write requests that are submitted in the read completion
* worker. Therefore in the current situation, it is required
* that all write requests are flushed, so that all read and
* write requests are really completed when bios_in_flight
* changes to 0.
*/
atomic_set(&sctx->wr_ctx.flush_all_writes, 1);
scrub_submit(sctx);
mutex_lock(&sctx->wr_ctx.wr_lock);
scrub_wr_submit(sctx);
mutex_unlock(&sctx->wr_ctx.wr_lock);
wait_event(sctx->list_wait,
atomic_read(&sctx->bios_in_flight) == 0);
atomic_set(&sctx->wr_ctx.flush_all_writes, 0);
atomic_inc(&fs_info->scrubs_paused);
wake_up(&fs_info->scrub_pause_wait);
wait_event(sctx->list_wait,
atomic_read(&sctx->workers_pending) == 0);
mutex_lock(&fs_info->scrub_lock);
while (atomic_read(&fs_info->scrub_pause_req)) {
mutex_unlock(&fs_info->scrub_lock);
wait_event(fs_info->scrub_pause_wait,
atomic_read(&fs_info->scrub_pause_req) == 0);
mutex_lock(&fs_info->scrub_lock);
}
atomic_dec(&fs_info->scrubs_paused);
mutex_unlock(&fs_info->scrub_lock);
wake_up(&fs_info->scrub_pause_wait);
dev_replace->cursor_left = dev_replace->cursor_right;
dev_replace->item_needs_writeback = 1;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
btrfs_put_block_group(cache);
if (ret)
break;
Btrfs: fix a scrub regression in case of write errors This regression was introduced by the device-replace patches. Scrub immediately stops checking those disks that have write errors. This is nothing that happens in the real world, but it is wrong since scrub is the tool to detect and repair defects. Fix it. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-27 17:39:51 +00:00
if (is_dev_replace &&
atomic64_read(&dev_replace->num_write_errors) > 0) {
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
ret = -EIO;
break;
}
if (sctx->stat.malloc_errors > 0) {
ret = -ENOMEM;
break;
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
key.offset = found_key.offset + length;
Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/arne/btrfs-unstable-arne into inode_numbers Conflicts: fs/btrfs/Makefile fs/btrfs/ctree.h fs/btrfs/volumes.h Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-23 10:30:52 +00:00
btrfs_release_path(path);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
btrfs_free_path(path);
btrfs: scrub: errors in tree enumeration due to the semantics of btrfs_search_slot the path can point to an invalid slot when ret > 0. This condition went unnoticed, which in turn could have led to an incomplete scrubbing. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-03 08:09:26 +00:00
/*
* ret can still be 1 from search_slot or next_leaf,
* that's not an error
*/
return ret < 0 ? ret : 0;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
static noinline_for_stack int scrub_supers(struct scrub_ctx *sctx,
struct btrfs_device *scrub_dev)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
int i;
u64 bytenr;
u64 gen;
int ret;
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
struct btrfs_root *root = sctx->dev_root;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: use bit operation for ->fs_state There is no lock to protect fs_info->fs_state, it will introduce some problems, such as the value may be covered by the other task when several tasks modify it. For example: Task0 - CPU0 Task1 - CPU1 mov %fs_state rax or $0x1 rax mov %fs_state rax or $0x2 rax mov rax %fs_state mov rax %fs_state The expected value is 3, but in fact, it is 2. Though this problem doesn't happen now (because there is only one flag currently), the code is error prone, if we add other flags, the above problem will happen to a certainty. Now we use bit operation for it to fix the above problem. In this way, we can make the code more robust and be easy to add new flags. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-01-29 10:14:48 +00:00
if (test_bit(BTRFS_FS_STATE_ERROR, &root->fs_info->fs_state))
btrfs: replace many BUG_ONs with proper error handling btrfs currently handles most errors with BUG_ON. This patch is a work-in- progress but aims to handle most errors other than internal logic errors and ENOMEM more gracefully. This iteration prevents most crashes but can run into lockups with the page lock on occasion when the timing "works out." Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-12 15:03:00 +00:00
return -EIO;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
gen = root->fs_info->last_trans_committed;
for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
bytenr = btrfs_sb_offset(i);
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
if (bytenr + BTRFS_SUPER_INFO_SIZE > scrub_dev->total_bytes)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
break;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
ret = scrub_pages(sctx, bytenr, BTRFS_SUPER_INFO_SIZE, bytenr,
Btrfs: remove the block device pointer from the scrub context struct The block device is removed from the scrub context state structure. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in the scrub context struct and moved into the lower level scope of scrub_bio, fixup and page structures where the block device context is known. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 12:26:57 +00:00
scrub_dev, BTRFS_EXTENT_FLAG_SUPER, gen, i,
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
NULL, 1, bytenr);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
if (ret)
return ret;
}
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
wait_event(sctx->list_wait, atomic_read(&sctx->bios_in_flight) == 0);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
return 0;
}
/*
* get a reference count on fs_info->scrub_workers. start worker if necessary
*/
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
static noinline_for_stack int scrub_workers_get(struct btrfs_fs_info *fs_info,
int is_dev_replace)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
Btrfs: fix num_workers_starting bug and other bugs in async thread Al pointed out we have some random problems with the way we account for num_workers_starting in the async thread stuff. First of all we need to make sure to decrement num_workers_starting if we fail to start the worker, so make __btrfs_start_workers do this. Also fix __btrfs_start_workers so that it doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we failed to create a worker. Also check_pending_worker_creates needs to call __btrfs_start_work in it's work function since it already increments num_workers_starting. People only start one worker at a time, so get rid of the num_workers argument everywhere, and make btrfs_queue_worker a void since it will always succeed. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-11-18 19:37:27 +00:00
int ret = 0;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
mutex_lock(&fs_info->scrub_lock);
btrfs: reinitialize scrub workers Scrub starts the workers each time a scrub starts and stops them after it finished. This patch adds an initialization for the workers before each start, otherwise the workers behave strangely. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-10 10:07:07 +00:00
if (fs_info->scrub_workers_refcnt == 0) {
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (is_dev_replace)
btrfs_init_workers(&fs_info->scrub_workers, "scrub", 1,
&fs_info->generic_worker);
else
btrfs_init_workers(&fs_info->scrub_workers, "scrub",
fs_info->thread_pool_size,
&fs_info->generic_worker);
btrfs: reinitialize scrub workers Scrub starts the workers each time a scrub starts and stops them after it finished. This patch adds an initialization for the workers before each start, otherwise the workers behave strangely. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-10 10:07:07 +00:00
fs_info->scrub_workers.idle_thresh = 4;
Btrfs: fix num_workers_starting bug and other bugs in async thread Al pointed out we have some random problems with the way we account for num_workers_starting in the async thread stuff. First of all we need to make sure to decrement num_workers_starting if we fail to start the worker, so make __btrfs_start_workers do this. Also fix __btrfs_start_workers so that it doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we failed to create a worker. Also check_pending_worker_creates needs to call __btrfs_start_work in it's work function since it already increments num_workers_starting. People only start one worker at a time, so get rid of the num_workers argument everywhere, and make btrfs_queue_worker a void since it will always succeed. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-11-18 19:37:27 +00:00
ret = btrfs_start_workers(&fs_info->scrub_workers);
if (ret)
goto out;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
btrfs_init_workers(&fs_info->scrub_wr_completion_workers,
"scrubwrc",
fs_info->thread_pool_size,
&fs_info->generic_worker);
fs_info->scrub_wr_completion_workers.idle_thresh = 2;
ret = btrfs_start_workers(
&fs_info->scrub_wr_completion_workers);
if (ret)
goto out;
btrfs_init_workers(&fs_info->scrub_nocow_workers, "scrubnc", 1,
&fs_info->generic_worker);
ret = btrfs_start_workers(&fs_info->scrub_nocow_workers);
if (ret)
goto out;
btrfs: reinitialize scrub workers Scrub starts the workers each time a scrub starts and stops them after it finished. This patch adds an initialization for the workers before each start, otherwise the workers behave strangely. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-06-10 10:07:07 +00:00
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
++fs_info->scrub_workers_refcnt;
Btrfs: fix num_workers_starting bug and other bugs in async thread Al pointed out we have some random problems with the way we account for num_workers_starting in the async thread stuff. First of all we need to make sure to decrement num_workers_starting if we fail to start the worker, so make __btrfs_start_workers do this. Also fix __btrfs_start_workers so that it doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we failed to create a worker. Also check_pending_worker_creates needs to call __btrfs_start_work in it's work function since it already increments num_workers_starting. People only start one worker at a time, so get rid of the num_workers argument everywhere, and make btrfs_queue_worker a void since it will always succeed. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-11-18 19:37:27 +00:00
out:
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
mutex_unlock(&fs_info->scrub_lock);
Btrfs: fix num_workers_starting bug and other bugs in async thread Al pointed out we have some random problems with the way we account for num_workers_starting in the async thread stuff. First of all we need to make sure to decrement num_workers_starting if we fail to start the worker, so make __btrfs_start_workers do this. Also fix __btrfs_start_workers so that it doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we failed to create a worker. Also check_pending_worker_creates needs to call __btrfs_start_work in it's work function since it already increments num_workers_starting. People only start one worker at a time, so get rid of the num_workers argument everywhere, and make btrfs_queue_worker a void since it will always succeed. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-11-18 19:37:27 +00:00
return ret;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
static noinline_for_stack void scrub_workers_put(struct btrfs_fs_info *fs_info)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
mutex_lock(&fs_info->scrub_lock);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (--fs_info->scrub_workers_refcnt == 0) {
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
btrfs_stop_workers(&fs_info->scrub_workers);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
btrfs_stop_workers(&fs_info->scrub_wr_completion_workers);
btrfs_stop_workers(&fs_info->scrub_nocow_workers);
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
WARN_ON(fs_info->scrub_workers_refcnt < 0);
mutex_unlock(&fs_info->scrub_lock);
}
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
int btrfs_scrub_dev(struct btrfs_fs_info *fs_info, u64 devid, u64 start,
u64 end, struct btrfs_scrub_progress *progress,
Btrfs: disallow some operations on the device replace target device This patch adds some code to disallow operations on the device that is used as the target for the device replace operation. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 17:29:28 +00:00
int readonly, int is_dev_replace)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
int ret;
struct btrfs_device *dev;
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
if (btrfs_fs_closing(fs_info))
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
return -EINVAL;
/*
* check some assumptions
*/
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
if (fs_info->chunk_root->nodesize != fs_info->chunk_root->leafsize) {
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
printk(KERN_ERR
"btrfs_scrub: size assumption nodesize == leafsize (%d == %d) fails\n",
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
fs_info->chunk_root->nodesize,
fs_info->chunk_root->leafsize);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
return -EINVAL;
}
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
if (fs_info->chunk_root->nodesize > BTRFS_STRIPE_LEN) {
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/*
* in this case scrub is unable to calculate the checksum
* the way scrub is implemented. Do not handle this
* situation at all because it won't ever happen.
*/
printk(KERN_ERR
"btrfs_scrub: size assumption nodesize <= BTRFS_STRIPE_LEN (%d <= %d) fails\n",
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
fs_info->chunk_root->nodesize, BTRFS_STRIPE_LEN);
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
return -EINVAL;
}
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
if (fs_info->chunk_root->sectorsize != PAGE_SIZE) {
Btrfs: change scrub to support big blocks Scrub used to be coded for nodesize == leafsize == sectorsize == PAGE_SIZE. This is now changed to support sizes for nodesize and leafsize which are N * PAGE_SIZE. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:27 +00:00
/* not supported for data w/o checksums */
printk(KERN_ERR
"btrfs_scrub: size assumption sectorsize != PAGE_SIZE (%d != %lld) fails\n",
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
fs_info->chunk_root->sectorsize,
(unsigned long long)PAGE_SIZE);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
return -EINVAL;
}
Btrfs: make the scrub page array dynamically allocated With the modified design (in order to support the devive replace procedure) it is necessary to alloc the page array dynamically. The reason is that pages are reused. At first a page is used for the bio to read the data from the filesystem, then the same page is reused for the bio that writes the data to the target disk. Since the read process and the write process are completely decoupled, this requires a new concept of refcounts and get/put functions for pages, and it requires to use newly created pages for each read bio which are freed after the write operation is finished. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 13:58:04 +00:00
if (fs_info->chunk_root->nodesize >
PAGE_SIZE * SCRUB_MAX_PAGES_PER_BLOCK ||
fs_info->chunk_root->sectorsize >
PAGE_SIZE * SCRUB_MAX_PAGES_PER_BLOCK) {
/*
* would exhaust the array bounds of pagev member in
* struct scrub_block
*/
pr_err("btrfs_scrub: size assumption nodesize and sectorsize <= SCRUB_MAX_PAGES_PER_BLOCK (%d <= %d && %d <= %d) fails\n",
fs_info->chunk_root->nodesize,
SCRUB_MAX_PAGES_PER_BLOCK,
fs_info->chunk_root->sectorsize,
SCRUB_MAX_PAGES_PER_BLOCK);
return -EINVAL;
}
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
ret = scrub_workers_get(fs_info, is_dev_replace);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
if (ret)
return ret;
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
mutex_lock(&fs_info->fs_devices->device_list_mutex);
dev = btrfs_find_device(fs_info, devid, NULL, NULL);
Btrfs: disallow some operations on the device replace target device This patch adds some code to disallow operations on the device that is used as the target for the device replace operation. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 17:29:28 +00:00
if (!dev || (dev->missing && !is_dev_replace)) {
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
scrub_workers_put(fs_info);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
return -ENODEV;
}
mutex_lock(&fs_info->scrub_lock);
Btrfs: disallow some operations on the device replace target device This patch adds some code to disallow operations on the device that is used as the target for the device replace operation. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 17:29:28 +00:00
if (!dev->in_fs_metadata || dev->is_tgtdev_for_dev_replace) {
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
mutex_unlock(&fs_info->scrub_lock);
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
scrub_workers_put(fs_info);
return -EIO;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: change core code of btrfs to support the device replace operations This commit contains all the essential changes to the core code of Btrfs for support of the device replace procedure. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 12:15:27 +00:00
btrfs_dev_replace_lock(&fs_info->dev_replace);
if (dev->scrub_device ||
(!is_dev_replace &&
btrfs_dev_replace_is_ongoing(&fs_info->dev_replace))) {
btrfs_dev_replace_unlock(&fs_info->dev_replace);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
mutex_unlock(&fs_info->scrub_lock);
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
scrub_workers_put(fs_info);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
return -EINPROGRESS;
}
Btrfs: change core code of btrfs to support the device replace operations This commit contains all the essential changes to the core code of Btrfs for support of the device replace procedure. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 12:15:27 +00:00
btrfs_dev_replace_unlock(&fs_info->dev_replace);
Btrfs: disallow some operations on the device replace target device This patch adds some code to disallow operations on the device that is used as the target for the device replace operation. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 17:29:28 +00:00
sctx = scrub_setup_ctx(dev, is_dev_replace);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
if (IS_ERR(sctx)) {
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
mutex_unlock(&fs_info->scrub_lock);
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
scrub_workers_put(fs_info);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
return PTR_ERR(sctx);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sctx->readonly = readonly;
dev->scrub_device = sctx;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
atomic_inc(&fs_info->scrubs_running);
mutex_unlock(&fs_info->scrub_lock);
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (!is_dev_replace) {
down_read(&fs_info->scrub_super_lock);
ret = scrub_supers(sctx, dev);
up_read(&fs_info->scrub_super_lock);
}
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
if (!ret)
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
ret = scrub_enumerate_chunks(sctx, dev, start, end,
is_dev_replace);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
wait_event(sctx->list_wait, atomic_read(&sctx->bios_in_flight) == 0);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
atomic_dec(&fs_info->scrubs_running);
wake_up(&fs_info->scrub_pause_wait);
Btrfs: cleanup scrub bio and worker wait code Just move some code into functions to make everything more readable. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 15:44:58 +00:00
wait_event(sctx->list_wait, atomic_read(&sctx->workers_pending) == 0);
btrfs scrub: add fixup code for errors on nodatasum files This removes a FIXME comment and introduces the first part of nodatasum fixup: It gets the corresponding inode for a logical address and triggers a regular readpage for the corrupted sector. Once we have on-the-fly error correction our error will be automatically corrected. The correction code is expected to clear the newly introduced EXTENT_DAMAGED flag, making scrub report that error as "corrected" instead of "uncorrectable" eventually. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-06-13 18:04:15 +00:00
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
if (progress)
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
memcpy(progress, &sctx->stat, sizeof(*progress));
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
mutex_lock(&fs_info->scrub_lock);
dev->scrub_device = NULL;
mutex_unlock(&fs_info->scrub_lock);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
scrub_free_ctx(sctx);
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
scrub_workers_put(fs_info);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
return ret;
}
btrfs: return void in functions without error conditions Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-01 13:56:26 +00:00
void btrfs_scrub_pause(struct btrfs_root *root)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
struct btrfs_fs_info *fs_info = root->fs_info;
mutex_lock(&fs_info->scrub_lock);
atomic_inc(&fs_info->scrub_pause_req);
while (atomic_read(&fs_info->scrubs_paused) !=
atomic_read(&fs_info->scrubs_running)) {
mutex_unlock(&fs_info->scrub_lock);
wait_event(fs_info->scrub_pause_wait,
atomic_read(&fs_info->scrubs_paused) ==
atomic_read(&fs_info->scrubs_running));
mutex_lock(&fs_info->scrub_lock);
}
mutex_unlock(&fs_info->scrub_lock);
}
btrfs: return void in functions without error conditions Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-01 13:56:26 +00:00
void btrfs_scrub_continue(struct btrfs_root *root)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
struct btrfs_fs_info *fs_info = root->fs_info;
atomic_dec(&fs_info->scrub_pause_req);
wake_up(&fs_info->scrub_pause_wait);
}
btrfs: return void in functions without error conditions Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-01 13:56:26 +00:00
void btrfs_scrub_pause_super(struct btrfs_root *root)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
down_write(&root->fs_info->scrub_super_lock);
}
btrfs: return void in functions without error conditions Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-01 13:56:26 +00:00
void btrfs_scrub_continue_super(struct btrfs_root *root)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
up_write(&root->fs_info->scrub_super_lock);
}
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
int btrfs_scrub_cancel(struct btrfs_fs_info *fs_info)
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
{
mutex_lock(&fs_info->scrub_lock);
if (!atomic_read(&fs_info->scrubs_running)) {
mutex_unlock(&fs_info->scrub_lock);
return -ENOTCONN;
}
atomic_inc(&fs_info->scrub_cancel_req);
while (atomic_read(&fs_info->scrubs_running)) {
mutex_unlock(&fs_info->scrub_lock);
wait_event(fs_info->scrub_pause_wait,
atomic_read(&fs_info->scrubs_running) == 0);
mutex_lock(&fs_info->scrub_lock);
}
atomic_dec(&fs_info->scrub_cancel_req);
mutex_unlock(&fs_info->scrub_lock);
return 0;
}
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
int btrfs_scrub_cancel_dev(struct btrfs_fs_info *fs_info,
struct btrfs_device *dev)
btrfs: enhance transaction abort infrastructure Signed-off-by: Jeff Mahoney <jeffm@suse.com>
2012-03-01 16:24:58 +00:00
{
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
mutex_lock(&fs_info->scrub_lock);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sctx = dev->scrub_device;
if (!sctx) {
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
mutex_unlock(&fs_info->scrub_lock);
return -ENOTCONN;
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
atomic_inc(&sctx->cancel_req);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
while (dev->scrub_device) {
mutex_unlock(&fs_info->scrub_lock);
wait_event(fs_info->scrub_pause_wait,
dev->scrub_device == NULL);
mutex_lock(&fs_info->scrub_lock);
}
mutex_unlock(&fs_info->scrub_lock);
return 0;
}
Btrfs: minor cleanup in scrub Just a minor cleanup commit in preparation for the big block changes. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-03-27 18:21:26 +00:00
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
int btrfs_scrub_progress(struct btrfs_root *root, u64 devid,
struct btrfs_scrub_progress *progress)
{
struct btrfs_device *dev;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx = NULL;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
mutex_lock(&root->fs_info->fs_devices->device_list_mutex);
Btrfs: pass fs_info instead of root A small number of functions that are used in a device replace procedure when the operation is resumed at mount time are unable to pass the same root pointer that would be used in the regular (ioctl) context. And since the root pointer is not required, only the fs_info is, the root pointer argument is replaced with the fs_info pointer argument. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-05 16:03:39 +00:00
dev = btrfs_find_device(root->fs_info, devid, NULL, NULL);
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
if (dev)
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sctx = dev->scrub_device;
if (sctx)
memcpy(progress, &sctx->stat, sizeof(*progress));
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
mutex_unlock(&root->fs_info->fs_devices->device_list_mutex);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
return dev ? (sctx ? 0 : -ENOTCONN) : -ENODEV;
btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-03-08 13:14:00 +00:00
}
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
static void scrub_remap_extent(struct btrfs_fs_info *fs_info,
u64 extent_logical, u64 extent_len,
u64 *extent_physical,
struct btrfs_device **extent_dev,
int *extent_mirror_num)
{
u64 mapped_length;
struct btrfs_bio *bbio = NULL;
int ret;
mapped_length = extent_len;
ret = btrfs_map_block(fs_info, READ, extent_logical,
&mapped_length, &bbio, 0);
if (ret || !bbio || mapped_length < extent_len ||
!bbio->stripes[0].dev->bdev) {
kfree(bbio);
return;
}
*extent_physical = bbio->stripes[0].physical;
*extent_mirror_num = bbio->mirror_num;
*extent_dev = bbio->stripes[0].dev;
kfree(bbio);
}
static int scrub_setup_wr_ctx(struct scrub_ctx *sctx,
struct scrub_wr_ctx *wr_ctx,
struct btrfs_fs_info *fs_info,
struct btrfs_device *dev,
int is_dev_replace)
{
WARN_ON(wr_ctx->wr_curr_bio != NULL);
mutex_init(&wr_ctx->wr_lock);
wr_ctx->wr_curr_bio = NULL;
if (!is_dev_replace)
return 0;
WARN_ON(!dev->bdev);
wr_ctx->pages_per_wr_bio = min_t(int, SCRUB_PAGES_PER_WR_BIO,
bio_get_nr_vecs(dev->bdev));
wr_ctx->tgtdev = dev;
atomic_set(&wr_ctx->flush_all_writes, 0);
return 0;
}
static void scrub_free_wr_ctx(struct scrub_wr_ctx *wr_ctx)
{
mutex_lock(&wr_ctx->wr_lock);
kfree(wr_ctx->wr_curr_bio);
wr_ctx->wr_curr_bio = NULL;
mutex_unlock(&wr_ctx->wr_lock);
}
static int copy_nocow_pages(struct scrub_ctx *sctx, u64 logical, u64 len,
int mirror_num, u64 physical_for_dev_replace)
{
struct scrub_copy_nocow_ctx *nocow_ctx;
struct btrfs_fs_info *fs_info = sctx->dev_root->fs_info;
nocow_ctx = kzalloc(sizeof(*nocow_ctx), GFP_NOFS);
if (!nocow_ctx) {
spin_lock(&sctx->stat_lock);
sctx->stat.malloc_errors++;
spin_unlock(&sctx->stat_lock);
return -ENOMEM;
}
scrub_pending_trans_workers_inc(sctx);
nocow_ctx->sctx = sctx;
nocow_ctx->logical = logical;
nocow_ctx->len = len;
nocow_ctx->mirror_num = mirror_num;
nocow_ctx->physical_for_dev_replace = physical_for_dev_replace;
nocow_ctx->work.func = copy_nocow_pages_worker;
btrfs_queue_worker(&fs_info->scrub_nocow_workers,
&nocow_ctx->work);
return 0;
}
static void copy_nocow_pages_worker(struct btrfs_work *work)
{
struct scrub_copy_nocow_ctx *nocow_ctx =
container_of(work, struct scrub_copy_nocow_ctx, work);
struct scrub_ctx *sctx = nocow_ctx->sctx;
u64 logical = nocow_ctx->logical;
u64 len = nocow_ctx->len;
int mirror_num = nocow_ctx->mirror_num;
u64 physical_for_dev_replace = nocow_ctx->physical_for_dev_replace;
int ret;
struct btrfs_trans_handle *trans = NULL;
struct btrfs_fs_info *fs_info;
struct btrfs_path *path;
struct btrfs_root *root;
int not_written = 0;
fs_info = sctx->dev_root->fs_info;
root = fs_info->extent_root;
path = btrfs_alloc_path();
if (!path) {
spin_lock(&sctx->stat_lock);
sctx->stat.malloc_errors++;
spin_unlock(&sctx->stat_lock);
not_written = 1;
goto out;
}
trans = btrfs_join_transaction(root);
if (IS_ERR(trans)) {
not_written = 1;
goto out;
}
ret = iterate_inodes_from_logical(logical, fs_info, path,
copy_nocow_pages_for_inode,
nocow_ctx);
if (ret != 0 && ret != -ENOENT) {
pr_warn("iterate_inodes_from_logical() failed: log %llu, phys %llu, len %llu, mir %llu, ret %d\n",
(unsigned long long)logical,
(unsigned long long)physical_for_dev_replace,
(unsigned long long)len,
(unsigned long long)mirror_num, ret);
not_written = 1;
goto out;
}
out:
if (trans && !IS_ERR(trans))
btrfs_end_transaction(trans, root);
if (not_written)
btrfs_dev_replace_stats_inc(&fs_info->dev_replace.
num_uncorrectable_read_errors);
btrfs_free_path(path);
kfree(nocow_ctx);
scrub_pending_trans_workers_dec(sctx);
}
static int copy_nocow_pages_for_inode(u64 inum, u64 offset, u64 root, void *ctx)
{
unsigned long index;
struct scrub_copy_nocow_ctx *nocow_ctx = ctx;
int ret = 0;
struct btrfs_key key;
struct inode *inode = NULL;
struct btrfs_root *local_root;
u64 physical_for_dev_replace;
u64 len;
struct btrfs_fs_info *fs_info = nocow_ctx->sctx->dev_root->fs_info;
Btrfs: fix race between snapshot deletion and getting inode While running snapshot testscript created by Mitch and David, the race between autodefrag and snapshot deletion can lead to corruption of dead_root list so that we can get crash on btrfs_clean_old_snapshots(). And besides autodefrag, scrub also does the same thing, ie. read root first and get inode. Here is the story(take autodefrag as an example): (1) when we delete a snapshot or subvolume, it will set its root's refs to zero and do a iput() on its own inode, and if this inode happens to be the only active in-meory one in root's inode rbtree, it will add itself to the global dead_roots list for later cleanup. (2) after (1), the autodefrag thread may read another inode for defrag and the inode is just in the deleted snapshot/subvolume, but all of these are without checking if the root is still valid(refs > 0). So the end up result is adding the deleted snapshot/subvolume's root to the global dead_roots list AGAIN. Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu. So all we need to do is to take the lock to protect 'read root and get inode', since we synchronize to wait for the rcu grace period before adding something to the global dead_roots list. Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-01-29 03:22:10 +00:00
int srcu_index;
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
key.objectid = root;
key.type = BTRFS_ROOT_ITEM_KEY;
key.offset = (u64)-1;
Btrfs: fix race between snapshot deletion and getting inode While running snapshot testscript created by Mitch and David, the race between autodefrag and snapshot deletion can lead to corruption of dead_root list so that we can get crash on btrfs_clean_old_snapshots(). And besides autodefrag, scrub also does the same thing, ie. read root first and get inode. Here is the story(take autodefrag as an example): (1) when we delete a snapshot or subvolume, it will set its root's refs to zero and do a iput() on its own inode, and if this inode happens to be the only active in-meory one in root's inode rbtree, it will add itself to the global dead_roots list for later cleanup. (2) after (1), the autodefrag thread may read another inode for defrag and the inode is just in the deleted snapshot/subvolume, but all of these are without checking if the root is still valid(refs > 0). So the end up result is adding the deleted snapshot/subvolume's root to the global dead_roots list AGAIN. Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu. So all we need to do is to take the lock to protect 'read root and get inode', since we synchronize to wait for the rcu grace period before adding something to the global dead_roots list. Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-01-29 03:22:10 +00:00
srcu_index = srcu_read_lock(&fs_info->subvol_srcu);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
local_root = btrfs_read_fs_root_no_name(fs_info, &key);
Btrfs: fix race between snapshot deletion and getting inode While running snapshot testscript created by Mitch and David, the race between autodefrag and snapshot deletion can lead to corruption of dead_root list so that we can get crash on btrfs_clean_old_snapshots(). And besides autodefrag, scrub also does the same thing, ie. read root first and get inode. Here is the story(take autodefrag as an example): (1) when we delete a snapshot or subvolume, it will set its root's refs to zero and do a iput() on its own inode, and if this inode happens to be the only active in-meory one in root's inode rbtree, it will add itself to the global dead_roots list for later cleanup. (2) after (1), the autodefrag thread may read another inode for defrag and the inode is just in the deleted snapshot/subvolume, but all of these are without checking if the root is still valid(refs > 0). So the end up result is adding the deleted snapshot/subvolume's root to the global dead_roots list AGAIN. Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu. So all we need to do is to take the lock to protect 'read root and get inode', since we synchronize to wait for the rcu grace period before adding something to the global dead_roots list. Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-01-29 03:22:10 +00:00
if (IS_ERR(local_root)) {
srcu_read_unlock(&fs_info->subvol_srcu, srcu_index);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
return PTR_ERR(local_root);
Btrfs: fix race between snapshot deletion and getting inode While running snapshot testscript created by Mitch and David, the race between autodefrag and snapshot deletion can lead to corruption of dead_root list so that we can get crash on btrfs_clean_old_snapshots(). And besides autodefrag, scrub also does the same thing, ie. read root first and get inode. Here is the story(take autodefrag as an example): (1) when we delete a snapshot or subvolume, it will set its root's refs to zero and do a iput() on its own inode, and if this inode happens to be the only active in-meory one in root's inode rbtree, it will add itself to the global dead_roots list for later cleanup. (2) after (1), the autodefrag thread may read another inode for defrag and the inode is just in the deleted snapshot/subvolume, but all of these are without checking if the root is still valid(refs > 0). So the end up result is adding the deleted snapshot/subvolume's root to the global dead_roots list AGAIN. Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu. So all we need to do is to take the lock to protect 'read root and get inode', since we synchronize to wait for the rcu grace period before adding something to the global dead_roots list. Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-01-29 03:22:10 +00:00
}
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
key.type = BTRFS_INODE_ITEM_KEY;
key.objectid = inum;
key.offset = 0;
inode = btrfs_iget(fs_info->sb, &key, local_root, NULL);
Btrfs: fix race between snapshot deletion and getting inode While running snapshot testscript created by Mitch and David, the race between autodefrag and snapshot deletion can lead to corruption of dead_root list so that we can get crash on btrfs_clean_old_snapshots(). And besides autodefrag, scrub also does the same thing, ie. read root first and get inode. Here is the story(take autodefrag as an example): (1) when we delete a snapshot or subvolume, it will set its root's refs to zero and do a iput() on its own inode, and if this inode happens to be the only active in-meory one in root's inode rbtree, it will add itself to the global dead_roots list for later cleanup. (2) after (1), the autodefrag thread may read another inode for defrag and the inode is just in the deleted snapshot/subvolume, but all of these are without checking if the root is still valid(refs > 0). So the end up result is adding the deleted snapshot/subvolume's root to the global dead_roots list AGAIN. Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu. So all we need to do is to take the lock to protect 'read root and get inode', since we synchronize to wait for the rcu grace period before adding something to the global dead_roots list. Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-01-29 03:22:10 +00:00
srcu_read_unlock(&fs_info->subvol_srcu, srcu_index);
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 10:43:11 +00:00
if (IS_ERR(inode))
return PTR_ERR(inode);
physical_for_dev_replace = nocow_ctx->physical_for_dev_replace;
len = nocow_ctx->len;
while (len >= PAGE_CACHE_SIZE) {
struct page *page = NULL;
int ret_sub;
index = offset >> PAGE_CACHE_SHIFT;
page = find_or_create_page(inode->i_mapping, index, GFP_NOFS);
if (!page) {
pr_err("find_or_create_page() failed\n");
ret = -ENOMEM;
goto next_page;
}
if (PageUptodate(page)) {
if (PageDirty(page))
goto next_page;
} else {
ClearPageError(page);
ret_sub = extent_read_full_page(&BTRFS_I(inode)->
io_tree,
page, btrfs_get_extent,
nocow_ctx->mirror_num);
if (ret_sub) {
ret = ret_sub;
goto next_page;
}
wait_on_page_locked(page);
if (!PageUptodate(page)) {
ret = -EIO;
goto next_page;
}
}
ret_sub = write_page_nocow(nocow_ctx->sctx,
physical_for_dev_replace, page);
if (ret_sub) {
ret = ret_sub;
goto next_page;
}
next_page:
if (page) {
unlock_page(page);
put_page(page);
}
offset += PAGE_CACHE_SIZE;
physical_for_dev_replace += PAGE_CACHE_SIZE;
len -= PAGE_CACHE_SIZE;
}
if (inode)
iput(inode);
return ret;
}
static int write_page_nocow(struct scrub_ctx *sctx,
u64 physical_for_dev_replace, struct page *page)
{
struct bio *bio;
struct btrfs_device *dev;
int ret;
DECLARE_COMPLETION_ONSTACK(compl);
dev = sctx->wr_ctx.tgtdev;
if (!dev)
return -EIO;
if (!dev->bdev) {
printk_ratelimited(KERN_WARNING
"btrfs: scrub write_page_nocow(bdev == NULL) is unexpected!\n");
return -EIO;
}
bio = bio_alloc(GFP_NOFS, 1);
if (!bio) {
spin_lock(&sctx->stat_lock);
sctx->stat.malloc_errors++;
spin_unlock(&sctx->stat_lock);
return -ENOMEM;
}
bio->bi_private = &compl;
bio->bi_end_io = scrub_complete_bio_end_io;
bio->bi_size = 0;
bio->bi_sector = physical_for_dev_replace >> 9;
bio->bi_bdev = dev->bdev;
ret = bio_add_page(bio, page, PAGE_CACHE_SIZE, 0);
if (ret != PAGE_CACHE_SIZE) {
leave_with_eio:
bio_put(bio);
btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS);
return -EIO;
}
btrfsic_submit_bio(WRITE_SYNC, bio);
wait_for_completion(&compl);
if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
goto leave_with_eio;
bio_put(bio);
return 0;
}
Reference in New Issue Copy Permalink