linux/drivers/gpu/drm/panel/panel-sony-acx424akp.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * MIPI-DSI Sony ACX424AKP panel driver. This is a 480x864
 * AMOLED panel with a command-only DSI interface.
 *
 * Copyright (C) Linaro Ltd. 2019
 * Author: Linus Walleij
 * Based on code and know-how from Marcus Lorentzon
 * Copyright (C) ST-Ericsson SA 2010
 */
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regulator/consumer.h>

#include <video/mipi_display.h>

#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#include <drm/drm_print.h>

#define ACX424_DCS_READ_ID1		0xDA
#define ACX424_DCS_READ_ID2		0xDB
#define ACX424_DCS_READ_ID3		0xDC
#define ACX424_DCS_SET_MDDI		0xAE

/*
 * Sony seems to use vendor ID 0x81
 */
#define DISPLAY_SONY_ACX424AKP_ID1	0x811b
#define DISPLAY_SONY_ACX424AKP_ID2	0x811a
/*
 * The third ID looks like a bug, vendor IDs begin at 0x80
 * and panel 00 ... seems like default values.
 */
#define DISPLAY_SONY_ACX424AKP_ID3	0x8000

struct acx424akp {
	struct drm_panel panel;
	struct device *dev;
	struct backlight_device *bl;
	struct regulator *supply;
	struct gpio_desc *reset_gpio;
	bool video_mode;
};

static const struct drm_display_mode sony_acx424akp_vid_mode = {
	.clock = 27234,
	.hdisplay = 480,
	.hsync_start = 480 + 15,
	.hsync_end = 480 + 15 + 0,
	.htotal = 480 + 15 + 0 + 15,
	.vdisplay = 864,
	.vsync_start = 864 + 14,
	.vsync_end = 864 + 14 + 1,
	.vtotal = 864 + 14 + 1 + 11,
	.width_mm = 48,
	.height_mm = 84,
	.flags = DRM_MODE_FLAG_PVSYNC,
};

/*
 * The timings are not very helpful as the display is used in
 * command mode using the maximum HS frequency.
 */
static const struct drm_display_mode sony_acx424akp_cmd_mode = {
	.clock = 35478,
	.hdisplay = 480,
	.hsync_start = 480 + 154,
	.hsync_end = 480 + 154 + 16,
	.htotal = 480 + 154 + 16 + 32,
	.vdisplay = 864,
	.vsync_start = 864 + 1,
	.vsync_end = 864 + 1 + 1,
	.vtotal = 864 + 1 + 1 + 1,
	/*
	 * Some desired refresh rate, experiments at the maximum "pixel"
	 * clock speed (HS clock 420 MHz) yields around 117Hz.
	 */
	.width_mm = 48,
	.height_mm = 84,
};

static inline struct acx424akp *panel_to_acx424akp(struct drm_panel *panel)
{
	return container_of(panel, struct acx424akp, panel);
}

#define FOSC			20 /* 20Mhz */
#define SCALE_FACTOR_NS_DIV_MHZ	1000

static int acx424akp_set_brightness(struct backlight_device *bl)
{
	struct acx424akp *acx = bl_get_data(bl);
	struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
	int period_ns = 1023;
	int duty_ns = bl->props.brightness;
	u8 pwm_ratio;
	u8 pwm_div;
	u8 par;
	int ret;

	/* Calculate the PWM duty cycle in n/256's */
	pwm_ratio = max(((duty_ns * 256) / period_ns) - 1, 1);
	pwm_div = max(1,
		      ((FOSC * period_ns) / 256) /
		      SCALE_FACTOR_NS_DIV_MHZ);

	/* Set up PWM dutycycle ONE byte (differs from the standard) */
	DRM_DEV_DEBUG(acx->dev, "calculated duty cycle %02x\n", pwm_ratio);
	ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
				 &pwm_ratio, 1);
	if (ret < 0) {
		DRM_DEV_ERROR(acx->dev,
			      "failed to set display PWM ratio (%d)\n",
			      ret);
		return ret;
	}

	/*
	 * Sequence to write PWMDIV:
	 *	address		data
	 *	0xF3		0xAA   CMD2 Unlock
	 *	0x00		0x01   Enter CMD2 page 0
	 *	0X7D		0x01   No reload MTP of CMD2 P1
	 *	0x22		PWMDIV
	 *	0x7F		0xAA   CMD2 page 1 lock
	 */
	par = 0xaa;
	ret = mipi_dsi_dcs_write(dsi, 0xf3, &par, 1);
	if (ret < 0) {
		DRM_DEV_ERROR(acx->dev,
			      "failed to unlock CMD 2 (%d)\n",
			      ret);
		return ret;
	}
	par = 0x01;
	ret = mipi_dsi_dcs_write(dsi, 0x00, &par, 1);
	if (ret < 0) {
		DRM_DEV_ERROR(acx->dev,
			      "failed to enter page 1 (%d)\n",
			      ret);
		return ret;
	}
	par = 0x01;
	ret = mipi_dsi_dcs_write(dsi, 0x7d, &par, 1);
	if (ret < 0) {
		DRM_DEV_ERROR(acx->dev,
			      "failed to disable MTP reload (%d)\n",
			      ret);
		return ret;
	}
	ret = mipi_dsi_dcs_write(dsi, 0x22, &pwm_div, 1);
	if (ret < 0) {
		DRM_DEV_ERROR(acx->dev,
			      "failed to set PWM divisor (%d)\n",
			      ret);
		return ret;
	}
	par = 0xaa;
	ret = mipi_dsi_dcs_write(dsi, 0x7f, &par, 1);
	if (ret < 0) {
		DRM_DEV_ERROR(acx->dev,
			      "failed to lock CMD 2 (%d)\n",
			      ret);
		return ret;
	}

	/* Enable backlight */
	par = 0x24;
	ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
				 &par, 1);
	if (ret < 0) {
		DRM_DEV_ERROR(acx->dev,
			      "failed to enable display backlight (%d)\n",
			      ret);
		return ret;
	}

	return 0;
}

static const struct backlight_ops acx424akp_bl_ops = {
	.update_status = acx424akp_set_brightness,
};

static int acx424akp_read_id(struct acx424akp *acx)
{
	struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
	u8 vendor, version, panel;
	u16 val;
	int ret;

	ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID1, &vendor, 1);
	if (ret < 0) {
		DRM_DEV_ERROR(acx->dev, "could not vendor ID byte\n");
		return ret;
	}
	ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID2, &version, 1);
	if (ret < 0) {
		DRM_DEV_ERROR(acx->dev, "could not read device version byte\n");
		return ret;
	}
	ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID3, &panel, 1);
	if (ret < 0) {
		DRM_DEV_ERROR(acx->dev, "could not read panel ID byte\n");
		return ret;
	}

	if (vendor == 0x00) {
		DRM_DEV_ERROR(acx->dev, "device vendor ID is zero\n");
		return -ENODEV;
	}

	val = (vendor << 8) | panel;
	switch (val) {
	case DISPLAY_SONY_ACX424AKP_ID1:
	case DISPLAY_SONY_ACX424AKP_ID2:
	case DISPLAY_SONY_ACX424AKP_ID3:
		DRM_DEV_INFO(acx->dev,
			     "MTP vendor: %02x, version: %02x, panel: %02x\n",
			     vendor, version, panel);
		break;
	default:
		DRM_DEV_INFO(acx->dev,
			     "unknown vendor: %02x, version: %02x, panel: %02x\n",
			     vendor, version, panel);
		break;
	}

	return 0;
}

static int acx424akp_power_on(struct acx424akp *acx)
{
	int ret;

	ret = regulator_enable(acx->supply);
	if (ret) {
		DRM_DEV_ERROR(acx->dev, "failed to enable supply (%d)\n", ret);
		return ret;
	}

	/* Assert RESET */
	gpiod_set_value_cansleep(acx->reset_gpio, 1);
	udelay(20);
	/* De-assert RESET */
	gpiod_set_value_cansleep(acx->reset_gpio, 0);
	usleep_range(11000, 20000);

	return 0;
}

static void acx424akp_power_off(struct acx424akp *acx)
{
	/* Assert RESET */
	gpiod_set_value_cansleep(acx->reset_gpio, 1);
	usleep_range(11000, 20000);

	regulator_disable(acx->supply);
}

static int acx424akp_prepare(struct drm_panel *panel)
{
	struct acx424akp *acx = panel_to_acx424akp(panel);
	struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
	const u8 mddi = 3;
	int ret;

	ret = acx424akp_power_on(acx);
	if (ret)
		return ret;

	ret = acx424akp_read_id(acx);
	if (ret) {
		DRM_DEV_ERROR(acx->dev, "failed to read panel ID (%d)\n", ret);
		goto err_power_off;
	}

	/* Enabe tearing mode: send TE (tearing effect) at VBLANK */
	ret = mipi_dsi_dcs_set_tear_on(dsi,
				       MIPI_DSI_DCS_TEAR_MODE_VBLANK);
	if (ret) {
		DRM_DEV_ERROR(acx->dev, "failed to enable vblank TE (%d)\n",
			      ret);
		goto err_power_off;
	}

	/*
	 * Set MDDI
	 *
	 * This presumably deactivates the Qualcomm MDDI interface and
	 * selects DSI, similar code is found in other drivers such as the
	 * Sharp LS043T1LE01 which makes us suspect that this panel may be
	 * using a Novatek NT35565 or similar display driver chip that shares
	 * this command. Due to the lack of documentation we cannot know for
	 * sure.
	 */
	ret = mipi_dsi_dcs_write(dsi, ACX424_DCS_SET_MDDI,
				 &mddi, sizeof(mddi));
	if (ret < 0) {
		DRM_DEV_ERROR(acx->dev, "failed to set MDDI (%d)\n", ret);
		goto err_power_off;
	}

	/* Exit sleep mode */
	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
	if (ret) {
		DRM_DEV_ERROR(acx->dev, "failed to exit sleep mode (%d)\n",
			      ret);
		goto err_power_off;
	}
	msleep(140);

	ret = mipi_dsi_dcs_set_display_on(dsi);
	if (ret) {
		DRM_DEV_ERROR(acx->dev, "failed to turn display on (%d)\n",
			      ret);
		goto err_power_off;
	}
	if (acx->video_mode) {
		/* In video mode turn peripheral on */
		ret = mipi_dsi_turn_on_peripheral(dsi);
		if (ret) {
			dev_err(acx->dev, "failed to turn on peripheral\n");
			goto err_power_off;
		}
	}

	acx->bl->props.power = FB_BLANK_NORMAL;

	return 0;

err_power_off:
	acx424akp_power_off(acx);
	return ret;
}

static int acx424akp_unprepare(struct drm_panel *panel)
{
	struct acx424akp *acx = panel_to_acx424akp(panel);
	struct mipi_dsi_device *dsi = to_mipi_dsi_device(acx->dev);
	u8 par;
	int ret;

	/* Disable backlight */
	par = 0x00;
	ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
				 &par, 1);
	if (ret) {
		DRM_DEV_ERROR(acx->dev,
			      "failed to disable display backlight (%d)\n",
			      ret);
		return ret;
	}

	ret = mipi_dsi_dcs_set_display_off(dsi);
	if (ret) {
		DRM_DEV_ERROR(acx->dev, "failed to turn display off (%d)\n",
			      ret);
		return ret;
	}

	/* Enter sleep mode */
	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
	if (ret) {
		DRM_DEV_ERROR(acx->dev, "failed to enter sleep mode (%d)\n",
			      ret);
		return ret;
	}
	msleep(85);

	acx424akp_power_off(acx);
	acx->bl->props.power = FB_BLANK_POWERDOWN;

	return 0;
}

static int acx424akp_enable(struct drm_panel *panel)
{
	struct acx424akp *acx = panel_to_acx424akp(panel);

	/*
	 * The backlight is on as long as the display is on
	 * so no use to call backlight_enable() here.
	 */
	acx->bl->props.power = FB_BLANK_UNBLANK;

	return 0;
}

static int acx424akp_disable(struct drm_panel *panel)
{
	struct acx424akp *acx = panel_to_acx424akp(panel);

	/*
	 * The backlight is on as long as the display is on
	 * so no use to call backlight_disable() here.
	 */
	acx->bl->props.power = FB_BLANK_NORMAL;

	return 0;
}

static int acx424akp_get_modes(struct drm_panel *panel,
			       struct drm_connector *connector)
{
	struct acx424akp *acx = panel_to_acx424akp(panel);
	struct drm_display_mode *mode;

	if (acx->video_mode)
		mode = drm_mode_duplicate(connector->dev,
					  &sony_acx424akp_vid_mode);
	else
		mode = drm_mode_duplicate(connector->dev,
					  &sony_acx424akp_cmd_mode);
	if (!mode) {
		DRM_ERROR("bad mode or failed to add mode\n");
		return -EINVAL;
	}
	drm_mode_set_name(mode);
	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;

	connector->display_info.width_mm = mode->width_mm;
	connector->display_info.height_mm = mode->height_mm;

	drm_mode_probed_add(connector, mode);

	return 1; /* Number of modes */
}

static const struct drm_panel_funcs acx424akp_drm_funcs = {
	.disable = acx424akp_disable,
	.unprepare = acx424akp_unprepare,
	.prepare = acx424akp_prepare,
	.enable = acx424akp_enable,
	.get_modes = acx424akp_get_modes,
};

static int acx424akp_probe(struct mipi_dsi_device *dsi)
{
	struct device *dev = &dsi->dev;
	struct acx424akp *acx;
	int ret;

	acx = devm_kzalloc(dev, sizeof(struct acx424akp), GFP_KERNEL);
	if (!acx)
		return -ENOMEM;
	acx->video_mode = of_property_read_bool(dev->of_node,
						"enforce-video-mode");

	mipi_dsi_set_drvdata(dsi, acx);
	acx->dev = dev;

	dsi->lanes = 2;
	dsi->format = MIPI_DSI_FMT_RGB888;
	/*
	 * FIXME: these come from the ST-Ericsson vendor driver for the
	 * HREF520 and seems to reflect limitations in the PLLs on that
	 * platform, if you have the datasheet, please cross-check the
	 * actual max rates.
	 */
	dsi->lp_rate = 19200000;
	dsi->hs_rate = 420160000;

	if (acx->video_mode)
		/* Burst mode using event for sync */
		dsi->mode_flags =
			MIPI_DSI_MODE_VIDEO |
			MIPI_DSI_MODE_VIDEO_BURST;
	else
		dsi->mode_flags =
			MIPI_DSI_CLOCK_NON_CONTINUOUS |
			MIPI_DSI_MODE_EOT_PACKET;

	acx->supply = devm_regulator_get(dev, "vddi");
	if (IS_ERR(acx->supply))
		return PTR_ERR(acx->supply);

	/* This asserts RESET by default */
	acx->reset_gpio = devm_gpiod_get_optional(dev, "reset",
						  GPIOD_OUT_HIGH);
	if (IS_ERR(acx->reset_gpio)) {
		ret = PTR_ERR(acx->reset_gpio);
		if (ret != -EPROBE_DEFER)
			DRM_DEV_ERROR(dev, "failed to request GPIO (%d)\n",
				      ret);
		return ret;
	}

	drm_panel_init(&acx->panel, dev, &acx424akp_drm_funcs,
		       DRM_MODE_CONNECTOR_DSI);

	acx->bl = devm_backlight_device_register(dev, "acx424akp", dev, acx,
						 &acx424akp_bl_ops, NULL);
	if (IS_ERR(acx->bl)) {
		DRM_DEV_ERROR(dev, "failed to register backlight device\n");
		return PTR_ERR(acx->bl);
	}
	acx->bl->props.max_brightness = 1023;
	acx->bl->props.brightness = 512;
	acx->bl->props.power = FB_BLANK_POWERDOWN;

	ret = drm_panel_add(&acx->panel);
	if (ret < 0)
		return ret;

	ret = mipi_dsi_attach(dsi);
	if (ret < 0) {
		drm_panel_remove(&acx->panel);
		return ret;
	}

	return 0;
}

static int acx424akp_remove(struct mipi_dsi_device *dsi)
{
	struct acx424akp *acx = mipi_dsi_get_drvdata(dsi);

	mipi_dsi_detach(dsi);
	drm_panel_remove(&acx->panel);

	return 0;
}

static const struct of_device_id acx424akp_of_match[] = {
	{ .compatible = "sony,acx424akp" },
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, acx424akp_of_match);

static struct mipi_dsi_driver acx424akp_driver = {
	.probe = acx424akp_probe,
	.remove = acx424akp_remove,
	.driver = {
		.name = "panel-sony-acx424akp",
		.of_match_table = acx424akp_of_match,
	},
};
module_mipi_dsi_driver(acx424akp_driver);

MODULE_AUTHOR("Linus Wallei <linus.walleij@linaro.org>");
MODULE_DESCRIPTION("MIPI-DSI Sony acx424akp Panel Driver");
MODULE_LICENSE("GPL v2");