2012-11-13 17:16:43 +00:00
|
|
|
|
|
|
|
|
* Marvell MV64XXX I2C controller
|
|
|
|
|
|
|
|
|
|
Required properties :
|
|
|
|
|
|
|
|
|
|
- reg : Offset and length of the register set for the device
|
2014-03-04 16:28:38 +00:00
|
|
|
- compatible : Should be either:
|
2014-03-31 12:54:57 +00:00
|
|
|
- "allwinner,sun4i-a10-i2c"
|
2014-03-04 16:28:38 +00:00
|
|
|
- "allwinner,sun6i-a31-i2c"
|
|
|
|
|
- "marvell,mv64xxx-i2c"
|
|
|
|
|
- "marvell,mv78230-i2c"
|
|
|
|
|
- "marvell,mv78230-a0-i2c"
|
|
|
|
|
* Note: Only use "marvell,mv78230-a0-i2c" for a
|
|
|
|
|
very rare, initial version of the SoC which
|
|
|
|
|
had broken offload support. Linux
|
|
|
|
|
auto-detects this and sets it appropriately.
|
2012-11-13 17:16:43 +00:00
|
|
|
- interrupts : The interrupt number
|
2013-06-21 13:32:06 +00:00
|
|
|
|
|
|
|
|
Optional properties :
|
|
|
|
|
|
|
|
|
|
- clock-frequency : Desired I2C bus clock frequency in Hz. If not set the
|
|
|
|
|
default frequency is 100kHz
|
2014-03-04 16:28:38 +00:00
|
|
|
|
|
|
|
|
- resets : phandle to the parent reset controller. Mandatory
|
|
|
|
|
whenever you're using the "allwinner,sun6i-a31-i2c"
|
|
|
|
|
compatible.
|
2012-11-13 17:16:43 +00:00
|
|
|
|
|
|
|
|
Examples:
|
|
|
|
|
|
|
|
|
|
i2c@11000 {
|
|
|
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
|
|
|
reg = <0x11000 0x20>;
|
|
|
|
|
interrupts = <29>;
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
|
};
|
2013-08-22 14:19:05 +00:00
|
|
|
|
|
|
|
|
For the Armada XP:
|
|
|
|
|
|
|
|
|
|
i2c@11000 {
|
|
|
|
|
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
|
|
|
|
|
reg = <0x11000 0x100>;
|
|
|
|
|
interrupts = <29>;
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
|
};
|
