linux/arch/s390/mm/init.c

299 lines
7.0 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* S390 version
* Copyright IBM Corp. 1999
* Author(s): Hartmut Penner (hp@de.ibm.com)
*
* Derived from "arch/i386/mm/init.c"
* Copyright (C) 1995 Linus Torvalds
*/
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/swiotlb.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/pagemap.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:49 +00:00
#include <linux/memblock.h>
#include <linux/memory.h>
#include <linux/pfn.h>
#include <linux/poison.h>
#include <linux/initrd.h>
#include <linux/export.h>
#include <linux/cma.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/gfp.h>
#include <linux/dma-mapping.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/dma.h>
#include <asm/lowcore.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
#include <asm/sections.h>
#include <asm/ctl_reg.h>
#include <asm/sclp.h>
#include <asm/set_memory.h>
s390/kasan: add initialization code and enable it Kasan needs 1/8 of kernel virtual address space to be reserved as the shadow area. And eventually it requires the shadow memory offset to be known at compile time (passed to the compiler when full instrumentation is enabled). Any value picked as the shadow area offset for 3-level paging would eat up identity mapping on 4-level paging (with 1PB shadow area size). So, the kernel sticks to 3-level paging when kasan is enabled. 3TB border is picked as the shadow offset. The memory layout is adjusted so, that physical memory border does not exceed KASAN_SHADOW_START and vmemmap does not go below KASAN_SHADOW_END. Due to the fact that on s390 paging is set up very late and to cover more code with kasan instrumentation, temporary identity mapping and final shadow memory are set up early. The shadow memory mapping is later carried over to init_mm.pgd during paging_init. For the needs of paging structures allocation and shadow memory population a primitive allocator is used, which simply chops off memory blocks from the end of the physical memory. Kasan currenty doesn't track vmemmap and vmalloc areas. Current memory layout (for 3-level paging, 2GB physical memory). ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000002b00000 ---[ Kernel Image End ]--- 0x0000000002b00000-0x0000000080000000 2G <- physical memory border 0x0000000080000000-0x0000030000000000 3070G PUD I ---[ Kasan Shadow Start ]--- 0x0000030000000000-0x0000030010000000 256M PMD RW X <- shadow for 2G memory 0x0000030010000000-0x0000037ff0000000 523776M PTE RO NX <- kasan zero ro page 0x0000037ff0000000-0x0000038000000000 256M PMD RW X <- shadow for 2G modules ---[ Kasan Shadow End ]--- 0x0000038000000000-0x000003d100000000 324G PUD I ---[ vmemmap Area ]--- 0x000003d100000000-0x000003e080000000 ---[ vmalloc Area ]--- 0x000003e080000000-0x000003ff80000000 ---[ Modules Area ]--- 0x000003ff80000000-0x0000040000000000 2G Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-17 13:29:13 +00:00
#include <asm/kasan.h>
#include <asm/dma-mapping.h>
#include <asm/uv.h>
pgd_t swapper_pg_dir[PTRS_PER_PGD] __section(.bss..swapper_pg_dir);
unsigned long empty_zero_page, zero_page_mask;
EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(zero_page_mask);
bool initmem_freed;
static void __init setup_zero_pages(void)
{
unsigned int order;
struct page *page;
int i;
/* Latest machines require a mapping granularity of 512KB */
order = 7;
/* Limit number of empty zero pages for small memory sizes */
while (order > 2 && (totalram_pages() >> 10) < (1UL << order))
order--;
empty_zero_page = __get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
if (!empty_zero_page)
panic("Out of memory in setup_zero_pages");
page = virt_to_page((void *) empty_zero_page);
split_page(page, order);
for (i = 1 << order; i > 0; i--) {
mark_page_reserved(page);
page++;
}
zero_page_mask = ((PAGE_SIZE << order) - 1) & PAGE_MASK;
}
/*
* paging_init() sets up the page tables
*/
void __init paging_init(void)
{
unsigned long max_zone_pfns[MAX_NR_ZONES];
unsigned long pgd_type, asce_bits;
psw_t psw;
init_mm.pgd = swapper_pg_dir;
if (VMALLOC_END > _REGION2_SIZE) {
asce_bits = _ASCE_TYPE_REGION2 | _ASCE_TABLE_LENGTH;
pgd_type = _REGION2_ENTRY_EMPTY;
} else {
asce_bits = _ASCE_TYPE_REGION3 | _ASCE_TABLE_LENGTH;
pgd_type = _REGION3_ENTRY_EMPTY;
}
s390/mm: fix asce_bits handling with dynamic pagetable levels There is a race with multi-threaded applications between context switch and pagetable upgrade. In switch_mm() a new user_asce is built from mm->pgd and mm->context.asce_bits, w/o holding any locks. A concurrent mmap with a pagetable upgrade on another thread in crst_table_upgrade() could already have set new asce_bits, but not yet the new mm->pgd. This would result in a corrupt user_asce in switch_mm(), and eventually in a kernel panic from a translation exception. Fix this by storing the complete asce instead of just the asce_bits, which can then be read atomically from switch_mm(), so that it either sees the old value or the new value, but no mixture. Both cases are OK. Having the old value would result in a page fault on access to the higher level memory, but the fault handler would see the new mm->pgd, if it was a valid access after the mmap on the other thread has completed. So as worst-case scenario we would have a page fault loop for the racing thread until the next time slice. Also remove dead code and simplify the upgrade/downgrade path, there are no upgrades from 2 levels, and only downgrades from 3 levels for compat tasks. There are also no concurrent upgrades, because the mmap_sem is held with down_write() in do_mmap, so the flush and table checks during upgrade can be removed. Reported-by: Michael Munday <munday@ca.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-15 14:38:40 +00:00
init_mm.context.asce = (__pa(init_mm.pgd) & PAGE_MASK) | asce_bits;
S390_lowcore.kernel_asce = init_mm.context.asce;
s390: remove all code using the access register mode The vdso code for the getcpu() and the clock_gettime() call use the access register mode to access the per-CPU vdso data page with the current code. An alternative to the complicated AR mode is to use the secondary space mode. This makes the vdso faster and quite a bit simpler. The downside is that the uaccess code has to be changed quite a bit. Which instructions are used depends on the machine and what kind of uaccess operation is requested. The instruction dictates which ASCE value needs to be loaded into %cr1 and %cr7. The different cases: * User copy with MVCOS for z10 and newer machines The MVCOS instruction can copy between the primary space (aka user) and the home space (aka kernel) directly. For set_fs(KERNEL_DS) the kernel ASCE is loaded into %cr1. For set_fs(USER_DS) the user space is already loaded in %cr1. * User copy with MVCP/MVCS for older machines To be able to execute the MVCP/MVCS instructions the kernel needs to switch to primary mode. The control register %cr1 has to be set to the kernel ASCE and %cr7 to either the kernel ASCE or the user ASCE dependent on set_fs(KERNEL_DS) vs set_fs(USER_DS). * Data access in the user address space for strnlen / futex To use "normal" instruction with data from the user address space the secondary space mode is used. The kernel needs to switch to primary mode, %cr1 has to contain the kernel ASCE and %cr7 either the user ASCE or the kernel ASCE, dependent on set_fs. To load a new value into %cr1 or %cr7 is an expensive operation, the kernel tries to be lazy about it. E.g. for multiple user copies in a row with MVCP/MVCS the replacement of the vdso ASCE in %cr7 with the user ASCE is done only once. On return to user space a CPU bit is checked that loads the vdso ASCE again. To enable and disable the data access via the secondary space two new functions are added, enable_sacf_uaccess and disable_sacf_uaccess. The fact that a context is in secondary space uaccess mode is stored in the mm_segment_t value for the task. The code of an interrupt may use set_fs as long as it returns to the previous state it got with get_fs with another call to set_fs. The code in finish_arch_post_lock_switch simply has to do a set_fs with the current mm_segment_t value for the task. For CPUs with MVCOS: CPU running in | %cr1 ASCE | %cr7 ASCE | --------------------------------------|-----------|-----------| user space | user | vdso | kernel, USER_DS, normal-mode | user | vdso | kernel, USER_DS, normal-mode, lazy | user | user | kernel, USER_DS, sacf-mode | kernel | user | kernel, KERNEL_DS, normal-mode | kernel | vdso | kernel, KERNEL_DS, normal-mode, lazy | kernel | kernel | kernel, KERNEL_DS, sacf-mode | kernel | kernel | For CPUs without MVCOS: CPU running in | %cr1 ASCE | %cr7 ASCE | --------------------------------------|-----------|-----------| user space | user | vdso | kernel, USER_DS, normal-mode | user | vdso | kernel, USER_DS, normal-mode lazy | kernel | user | kernel, USER_DS, sacf-mode | kernel | user | kernel, KERNEL_DS, normal-mode | kernel | vdso | kernel, KERNEL_DS, normal-mode, lazy | kernel | kernel | kernel, KERNEL_DS, sacf-mode | kernel | kernel | The lines with "lazy" refer to the state after a copy via the secondary space with a delayed reload of %cr1 and %cr7. There are three hardware address spaces that can cause a DAT exception, primary, secondary and home space. The exception can be related to four different fault types: user space fault, vdso fault, kernel fault, and the gmap faults. Dependent on the set_fs state and normal vs. sacf mode there are a number of fault combinations: 1) user address space fault via the primary ASCE 2) gmap address space fault via the primary ASCE 3) kernel address space fault via the primary ASCE for machines with MVCOS and set_fs(KERNEL_DS) 4) vdso address space faults via the secondary ASCE with an invalid address while running in secondary space in problem state 5) user address space fault via the secondary ASCE for user-copy based on the secondary space mode, e.g. futex_ops or strnlen_user 6) kernel address space fault via the secondary ASCE for user-copy with secondary space mode with set_fs(KERNEL_DS) 7) kernel address space fault via the primary ASCE for user-copy with secondary space mode with set_fs(USER_DS) on machines without MVCOS. 8) kernel address space fault via the home space ASCE Replace user_space_fault() with a new function get_fault_type() that can distinguish all four different fault types. With these changes the futex atomic ops from the kernel and the strnlen_user will get a little bit slower, as well as the old style uaccess with MVCP/MVCS. All user accesses based on MVCOS will be as fast as before. On the positive side, the user space vdso code is a lot faster and Linux ceases to use the complicated AR mode. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2017-08-22 10:08:22 +00:00
S390_lowcore.user_asce = S390_lowcore.kernel_asce;
crst_table_init((unsigned long *) init_mm.pgd, pgd_type);
vmem_map_init();
s390/kasan: add initialization code and enable it Kasan needs 1/8 of kernel virtual address space to be reserved as the shadow area. And eventually it requires the shadow memory offset to be known at compile time (passed to the compiler when full instrumentation is enabled). Any value picked as the shadow area offset for 3-level paging would eat up identity mapping on 4-level paging (with 1PB shadow area size). So, the kernel sticks to 3-level paging when kasan is enabled. 3TB border is picked as the shadow offset. The memory layout is adjusted so, that physical memory border does not exceed KASAN_SHADOW_START and vmemmap does not go below KASAN_SHADOW_END. Due to the fact that on s390 paging is set up very late and to cover more code with kasan instrumentation, temporary identity mapping and final shadow memory are set up early. The shadow memory mapping is later carried over to init_mm.pgd during paging_init. For the needs of paging structures allocation and shadow memory population a primitive allocator is used, which simply chops off memory blocks from the end of the physical memory. Kasan currenty doesn't track vmemmap and vmalloc areas. Current memory layout (for 3-level paging, 2GB physical memory). ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000002b00000 ---[ Kernel Image End ]--- 0x0000000002b00000-0x0000000080000000 2G <- physical memory border 0x0000000080000000-0x0000030000000000 3070G PUD I ---[ Kasan Shadow Start ]--- 0x0000030000000000-0x0000030010000000 256M PMD RW X <- shadow for 2G memory 0x0000030010000000-0x0000037ff0000000 523776M PTE RO NX <- kasan zero ro page 0x0000037ff0000000-0x0000038000000000 256M PMD RW X <- shadow for 2G modules ---[ Kasan Shadow End ]--- 0x0000038000000000-0x000003d100000000 324G PUD I ---[ vmemmap Area ]--- 0x000003d100000000-0x000003e080000000 ---[ vmalloc Area ]--- 0x000003e080000000-0x000003ff80000000 ---[ Modules Area ]--- 0x000003ff80000000-0x0000040000000000 2G Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-17 13:29:13 +00:00
kasan_copy_shadow(init_mm.pgd);
s390/kasan: add initialization code and enable it Kasan needs 1/8 of kernel virtual address space to be reserved as the shadow area. And eventually it requires the shadow memory offset to be known at compile time (passed to the compiler when full instrumentation is enabled). Any value picked as the shadow area offset for 3-level paging would eat up identity mapping on 4-level paging (with 1PB shadow area size). So, the kernel sticks to 3-level paging when kasan is enabled. 3TB border is picked as the shadow offset. The memory layout is adjusted so, that physical memory border does not exceed KASAN_SHADOW_START and vmemmap does not go below KASAN_SHADOW_END. Due to the fact that on s390 paging is set up very late and to cover more code with kasan instrumentation, temporary identity mapping and final shadow memory are set up early. The shadow memory mapping is later carried over to init_mm.pgd during paging_init. For the needs of paging structures allocation and shadow memory population a primitive allocator is used, which simply chops off memory blocks from the end of the physical memory. Kasan currenty doesn't track vmemmap and vmalloc areas. Current memory layout (for 3-level paging, 2GB physical memory). ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000002b00000 ---[ Kernel Image End ]--- 0x0000000002b00000-0x0000000080000000 2G <- physical memory border 0x0000000080000000-0x0000030000000000 3070G PUD I ---[ Kasan Shadow Start ]--- 0x0000030000000000-0x0000030010000000 256M PMD RW X <- shadow for 2G memory 0x0000030010000000-0x0000037ff0000000 523776M PTE RO NX <- kasan zero ro page 0x0000037ff0000000-0x0000038000000000 256M PMD RW X <- shadow for 2G modules ---[ Kasan Shadow End ]--- 0x0000038000000000-0x000003d100000000 324G PUD I ---[ vmemmap Area ]--- 0x000003d100000000-0x000003e080000000 ---[ vmalloc Area ]--- 0x000003e080000000-0x000003ff80000000 ---[ Modules Area ]--- 0x000003ff80000000-0x0000040000000000 2G Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-17 13:29:13 +00:00
/* enable virtual mapping in kernel mode */
__ctl_load(S390_lowcore.kernel_asce, 1, 1);
__ctl_load(S390_lowcore.kernel_asce, 7, 7);
__ctl_load(S390_lowcore.kernel_asce, 13, 13);
psw.mask = __extract_psw();
psw_bits(psw).dat = 1;
psw_bits(psw).as = PSW_BITS_AS_HOME;
__load_psw_mask(psw.mask);
kasan_free_early_identity();
sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS);
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
free_area_init_nodes(max_zone_pfns);
}
void mark_rodata_ro(void)
{
unsigned long size = __end_ro_after_init - __start_ro_after_init;
set_memory_ro((unsigned long)__start_ro_after_init, size >> PAGE_SHIFT);
pr_info("Write protected read-only-after-init data: %luk\n", size >> 10);
}
int set_memory_encrypted(unsigned long addr, int numpages)
{
int i;
/* make specified pages unshared, (swiotlb, dma_free) */
for (i = 0; i < numpages; ++i) {
uv_remove_shared(addr);
addr += PAGE_SIZE;
}
return 0;
}
int set_memory_decrypted(unsigned long addr, int numpages)
{
int i;
/* make specified pages shared (swiotlb, dma_alloca) */
for (i = 0; i < numpages; ++i) {
uv_set_shared(addr);
addr += PAGE_SIZE;
}
return 0;
}
/* are we a protected virtualization guest? */
bool sev_active(void)
{
return is_prot_virt_guest();
}
/* protected virtualization */
static void pv_init(void)
{
if (!is_prot_virt_guest())
return;
/* make sure bounce buffers are shared */
swiotlb_init(1);
swiotlb_update_mem_attributes();
swiotlb_force = SWIOTLB_FORCE;
}
void __init mem_init(void)
{
cpumask_set_cpu(0, &init_mm.context.cpu_attach_mask);
cpumask_set_cpu(0, mm_cpumask(&init_mm));
set_max_mapnr(max_low_pfn);
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
pv_init();
/* Setup guest page hinting */
cmma_init();
/* this will put all low memory onto the freelists */
memblock: rename free_all_bootmem to memblock_free_all The conversion is done using sed -i 's@free_all_bootmem@memblock_free_all@' \ $(git grep -l free_all_bootmem) Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:30 +00:00
memblock_free_all();
setup_zero_pages(); /* Setup zeroed pages. */
cmma_init_nodat();
mem_init_print_info(NULL);
}
void free_initmem(void)
{
initmem_freed = true;
__set_memory((unsigned long)_sinittext,
(unsigned long)(_einittext - _sinittext) >> PAGE_SHIFT,
SET_MEMORY_RW | SET_MEMORY_NX);
mm: enhance free_reserved_area() to support poisoning memory with zero Address more review comments from last round of code review. 1) Enhance free_reserved_area() to support poisoning freed memory with pattern '0'. This could be used to get rid of poison_init_mem() on ARM64. 2) A previous patch has disabled memory poison for initmem on s390 by mistake, so restore to the original behavior. 3) Remove redundant PAGE_ALIGN() when calling free_reserved_area(). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: <sworddragon2@aol.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Michel Lespinasse <walken@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 22:02:51 +00:00
free_initmem_default(POISON_FREE_INITMEM);
}
unsigned long memory_block_size_bytes(void)
{
/*
* Make sure the memory block size is always greater
* or equal than the memory increment size.
*/
return max_t(unsigned long, MIN_MEMORY_BLOCK_SIZE, sclp.rzm);
}
#ifdef CONFIG_MEMORY_HOTPLUG
#ifdef CONFIG_CMA
/* Prevent memory blocks which contain cma regions from going offline */
struct s390_cma_mem_data {
unsigned long start;
unsigned long end;
};
static int s390_cma_check_range(struct cma *cma, void *data)
{
struct s390_cma_mem_data *mem_data;
unsigned long start, end;
mem_data = data;
start = cma_get_base(cma);
end = start + cma_get_size(cma);
if (end < mem_data->start)
return 0;
if (start >= mem_data->end)
return 0;
return -EBUSY;
}
static int s390_cma_mem_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct s390_cma_mem_data mem_data;
struct memory_notify *arg;
int rc = 0;
arg = data;
mem_data.start = arg->start_pfn << PAGE_SHIFT;
mem_data.end = mem_data.start + (arg->nr_pages << PAGE_SHIFT);
if (action == MEM_GOING_OFFLINE)
rc = cma_for_each_area(s390_cma_check_range, &mem_data);
return notifier_from_errno(rc);
}
static struct notifier_block s390_cma_mem_nb = {
.notifier_call = s390_cma_mem_notifier,
};
static int __init s390_cma_mem_init(void)
{
return register_memory_notifier(&s390_cma_mem_nb);
}
device_initcall(s390_cma_mem_init);
#endif /* CONFIG_CMA */
int arch_add_memory(int nid, u64 start, u64 size,
struct mhp_restrictions *restrictions)
{
unsigned long start_pfn = PFN_DOWN(start);
unsigned long size_pages = PFN_DOWN(size);
mm, memory_hotplug: do not associate hotadded memory to zones until online The current memory hotplug implementation relies on having all the struct pages associate with a zone/node during the physical hotplug phase (arch_add_memory->__add_pages->__add_section->__add_zone). In the vast majority of cases this means that they are added to ZONE_NORMAL. This has been so since 9d99aaa31f59 ("[PATCH] x86_64: Support memory hotadd without sparsemem") and it wasn't a big deal back then because movable onlining didn't exist yet. Much later memory hotplug wanted to (ab)use ZONE_MOVABLE for movable onlining 511c2aba8f07 ("mm, memory-hotplug: dynamic configure movable memory and portion memory") and then things got more complicated. Rather than reconsidering the zone association which was no longer needed (because the memory hotplug already depended on SPARSEMEM) a convoluted semantic of zone shifting has been developed. Only the currently last memblock or the one adjacent to the zone_movable can be onlined movable. This essentially means that the online type changes as the new memblocks are added. Let's simulate memory hot online manually $ echo 0x100000000 > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory32/valid_zones Normal Movable $ echo $((0x100000000+(128<<20))) > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal Movable $ echo $((0x100000000+2*(128<<20))) > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal /sys/devices/system/memory/memory34/valid_zones:Normal Movable $ echo online_movable > /sys/devices/system/memory/memory34/state $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Movable Normal This is an awkward semantic because an udev event is sent as soon as the block is onlined and an udev handler might want to online it based on some policy (e.g. association with a node) but it will inherently race with new blocks showing up. This patch changes the physical online phase to not associate pages with any zone at all. All the pages are just marked reserved and wait for the onlining phase to be associated with the zone as per the online request. There are only two requirements - existing ZONE_NORMAL and ZONE_MOVABLE cannot overlap - ZONE_NORMAL precedes ZONE_MOVABLE in physical addresses the latter one is not an inherent requirement and can be changed in the future. It preserves the current behavior and made the code slightly simpler. This is subject to change in future. This means that the same physical online steps as above will lead to the following state: Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Movable Implementation: The current move_pfn_range is reimplemented to check the above requirements (allow_online_pfn_range) and then updates the respective zone (move_pfn_range_to_zone), the pgdat and links all the pages in the pfn range with the zone/node. __add_pages is updated to not require the zone and only initializes sections in the range. This allowed to simplify the arch_add_memory code (s390 could get rid of quite some of code). devm_memremap_pages is the only user of arch_add_memory which relies on the zone association because it only hooks into the memory hotplug only half way. It uses it to associate the new memory with ZONE_DEVICE but doesn't allow it to be {on,off}lined via sysfs. This means that this particular code path has to call move_pfn_range_to_zone explicitly. The original zone shifting code is kept in place and will be removed in the follow up patch for an easier review. Please note that this patch also changes the original behavior when offlining a memory block adjacent to another zone (Normal vs. Movable) used to allow to change its movable type. This will be handled later. [richard.weiyang@gmail.com: simplify zone_intersects()] Link: http://lkml.kernel.org/r/20170616092335.5177-1-richard.weiyang@gmail.com [richard.weiyang@gmail.com: remove duplicate call for set_page_links] Link: http://lkml.kernel.org/r/20170616092335.5177-2-richard.weiyang@gmail.com [akpm@linux-foundation.org: remove unused local `i'] Link: http://lkml.kernel.org/r/20170515085827.16474-12-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # For s390 bits Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tobias Regnery <tobias.regnery@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:38:11 +00:00
int rc;
rc = vmem_add_mapping(start, size);
if (rc)
return rc;
rc = __add_pages(nid, start_pfn, size_pages, restrictions);
if (rc)
vmem_remove_mapping(start, size);
return rc;
}
#ifdef CONFIG_MEMORY_HOTREMOVE
mm/memory_hotplug: make __remove_pages() and arch_remove_memory() never fail All callers of arch_remove_memory() ignore errors. And we should really try to remove any errors from the memory removal path. No more errors are reported from __remove_pages(). BUG() in s390x code in case arch_remove_memory() is triggered. We may implement that properly later. WARN in case powerpc code failed to remove the section mapping, which is better than ignoring the error completely right now. Link: http://lkml.kernel.org/r/20190409100148.24703-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stefan Agner <stefan@agner.ch> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Herring <robh@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Qian Cai <cai@lca.pw> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mike Travis <mike.travis@hpe.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 00:21:46 +00:00
void arch_remove_memory(int nid, u64 start, u64 size,
struct vmem_altmap *altmap)
{
/*
* There is no hardware or firmware interface which could trigger a
* hot memory remove on s390. So there is nothing that needs to be
* implemented.
*/
mm/memory_hotplug: make __remove_pages() and arch_remove_memory() never fail All callers of arch_remove_memory() ignore errors. And we should really try to remove any errors from the memory removal path. No more errors are reported from __remove_pages(). BUG() in s390x code in case arch_remove_memory() is triggered. We may implement that properly later. WARN in case powerpc code failed to remove the section mapping, which is better than ignoring the error completely right now. Link: http://lkml.kernel.org/r/20190409100148.24703-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stefan Agner <stefan@agner.ch> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Rob Herring <robh@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Qian Cai <cai@lca.pw> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mike Travis <mike.travis@hpe.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 00:21:46 +00:00
BUG();
}
#endif
#endif /* CONFIG_MEMORY_HOTPLUG */