linux/drivers/clk/tegra/clk-tegra210.c

2752 lines
91 KiB
C
Raw Normal View History

/*
* Copyright (c) 2012-2014 NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/clk/tegra.h>
#include <dt-bindings/clock/tegra210-car.h>
#include "clk.h"
#include "clk-id.h"
/*
* TEGRA210_CAR_BANK_COUNT: the number of peripheral clock register
* banks present in the Tegra210 CAR IP block. The banks are
* identified by single letters, e.g.: L, H, U, V, W, X, Y. See
* periph_regs[] in drivers/clk/tegra/clk.c
*/
#define TEGRA210_CAR_BANK_COUNT 7
#define CLK_SOURCE_CSITE 0x1d4
#define CLK_SOURCE_EMC 0x19c
#define PLLC_BASE 0x80
#define PLLC_OUT 0x84
#define PLLC_MISC0 0x88
#define PLLC_MISC1 0x8c
#define PLLC_MISC2 0x5d0
#define PLLC_MISC3 0x5d4
#define PLLC2_BASE 0x4e8
#define PLLC2_MISC0 0x4ec
#define PLLC2_MISC1 0x4f0
#define PLLC2_MISC2 0x4f4
#define PLLC2_MISC3 0x4f8
#define PLLC3_BASE 0x4fc
#define PLLC3_MISC0 0x500
#define PLLC3_MISC1 0x504
#define PLLC3_MISC2 0x508
#define PLLC3_MISC3 0x50c
#define PLLM_BASE 0x90
#define PLLM_MISC1 0x98
#define PLLM_MISC2 0x9c
#define PLLP_BASE 0xa0
#define PLLP_MISC0 0xac
#define PLLP_MISC1 0x680
#define PLLA_BASE 0xb0
#define PLLA_MISC0 0xbc
#define PLLA_MISC1 0xb8
#define PLLA_MISC2 0x5d8
#define PLLD_BASE 0xd0
#define PLLD_MISC0 0xdc
#define PLLD_MISC1 0xd8
#define PLLU_BASE 0xc0
#define PLLU_OUTA 0xc4
#define PLLU_MISC0 0xcc
#define PLLU_MISC1 0xc8
#define PLLX_BASE 0xe0
#define PLLX_MISC0 0xe4
#define PLLX_MISC1 0x510
#define PLLX_MISC2 0x514
#define PLLX_MISC3 0x518
#define PLLX_MISC4 0x5f0
#define PLLX_MISC5 0x5f4
#define PLLE_BASE 0xe8
#define PLLE_MISC0 0xec
#define PLLD2_BASE 0x4b8
#define PLLD2_MISC0 0x4bc
#define PLLD2_MISC1 0x570
#define PLLD2_MISC2 0x574
#define PLLD2_MISC3 0x578
#define PLLE_AUX 0x48c
#define PLLRE_BASE 0x4c4
#define PLLRE_MISC0 0x4c8
#define PLLRE_OUT1 0x4cc
#define PLLDP_BASE 0x590
#define PLLDP_MISC 0x594
#define PLLC4_BASE 0x5a4
#define PLLC4_MISC0 0x5a8
#define PLLC4_OUT 0x5e4
#define PLLMB_BASE 0x5e8
#define PLLMB_MISC1 0x5ec
#define PLLA1_BASE 0x6a4
#define PLLA1_MISC0 0x6a8
#define PLLA1_MISC1 0x6ac
#define PLLA1_MISC2 0x6b0
#define PLLA1_MISC3 0x6b4
#define PLLU_IDDQ_BIT 31
#define PLLCX_IDDQ_BIT 27
#define PLLRE_IDDQ_BIT 24
#define PLLA_IDDQ_BIT 25
#define PLLD_IDDQ_BIT 20
#define PLLSS_IDDQ_BIT 18
#define PLLM_IDDQ_BIT 5
#define PLLMB_IDDQ_BIT 17
#define PLLXP_IDDQ_BIT 3
#define PLLCX_RESET_BIT 30
#define PLL_BASE_LOCK BIT(27)
#define PLLCX_BASE_LOCK BIT(26)
#define PLLE_MISC_LOCK BIT(11)
#define PLLRE_MISC_LOCK BIT(27)
#define PLL_MISC_LOCK_ENABLE 18
#define PLLC_MISC_LOCK_ENABLE 24
#define PLLDU_MISC_LOCK_ENABLE 22
#define PLLU_MISC_LOCK_ENABLE 29
#define PLLE_MISC_LOCK_ENABLE 9
#define PLLRE_MISC_LOCK_ENABLE 30
#define PLLSS_MISC_LOCK_ENABLE 30
#define PLLP_MISC_LOCK_ENABLE 18
#define PLLM_MISC_LOCK_ENABLE 4
#define PLLMB_MISC_LOCK_ENABLE 16
#define PLLA_MISC_LOCK_ENABLE 28
#define PLLU_MISC_LOCK_ENABLE 29
#define PLLD_MISC_LOCK_ENABLE 18
#define PLLA_SDM_DIN_MASK 0xffff
#define PLLA_SDM_EN_MASK BIT(26)
#define PLLD_SDM_EN_MASK BIT(16)
#define PLLD2_SDM_EN_MASK BIT(31)
#define PLLD2_SSC_EN_MASK BIT(30)
#define PLLDP_SS_CFG 0x598
#define PLLDP_SDM_EN_MASK BIT(31)
#define PLLDP_SSC_EN_MASK BIT(30)
#define PLLDP_SS_CTRL1 0x59c
#define PLLDP_SS_CTRL2 0x5a0
#define PMC_PLLM_WB0_OVERRIDE 0x1dc
#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0
#define SATA_PLL_CFG0 0x490
#define SATA_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0)
#define SATA_PLL_CFG0_PADPLL_USE_LOCKDET BIT(2)
#define SATA_PLL_CFG0_PADPLL_SLEEP_IDDQ BIT(13)
#define SATA_PLL_CFG0_SEQ_ENABLE BIT(24)
#define XUSBIO_PLL_CFG0 0x51c
#define XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0)
#define XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL BIT(2)
#define XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET BIT(6)
#define XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ BIT(13)
#define XUSBIO_PLL_CFG0_SEQ_ENABLE BIT(24)
#define UTMIPLL_HW_PWRDN_CFG0 0x52c
#define UTMIPLL_HW_PWRDN_CFG0_UTMIPLL_LOCK BIT(31)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE BIT(7)
#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
#define PLLU_HW_PWRDN_CFG0 0x530
#define PLLU_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE BIT(28)
#define PLLU_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
#define PLLU_HW_PWRDN_CFG0_USE_SWITCH_DETECT BIT(7)
#define PLLU_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
#define PLLU_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
#define PLLU_HW_PWRDN_CFG0_CLK_SWITCH_SWCTL BIT(0)
#define XUSB_PLL_CFG0 0x534
#define XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY 0x3ff
#define XUSB_PLL_CFG0_PLLU_LOCK_DLY_MASK (0x3ff << 14)
#define SPARE_REG0 0x55c
#define CLK_M_DIVISOR_SHIFT 2
#define CLK_M_DIVISOR_MASK 0x3
/*
* SDM fractional divisor is 16-bit 2's complement signed number within
* (-2^12 ... 2^12-1) range. Represented in PLL data structure as unsigned
* 16-bit value, with "0" divisor mapped to 0xFFFF. Data "0" is used to
* indicate that SDM is disabled.
*
* Effective ndiv value when SDM is enabled: ndiv + 1/2 + sdm_din/2^13
*/
#define PLL_SDM_COEFF BIT(13)
#define sdin_din_to_data(din) ((u16)((din) ? : 0xFFFFU))
#define sdin_data_to_din(dat) (((dat) == 0xFFFFU) ? 0 : (s16)dat)
/* Tegra CPU clock and reset control regs */
#define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470
#ifdef CONFIG_PM_SLEEP
static struct cpu_clk_suspend_context {
u32 clk_csite_src;
} tegra210_cpu_clk_sctx;
#endif
static void __iomem *clk_base;
static void __iomem *pmc_base;
static unsigned long osc_freq;
static unsigned long pll_ref_freq;
static DEFINE_SPINLOCK(pll_d_lock);
static DEFINE_SPINLOCK(pll_e_lock);
static DEFINE_SPINLOCK(pll_re_lock);
static DEFINE_SPINLOCK(pll_u_lock);
static DEFINE_SPINLOCK(emc_lock);
/* possible OSC frequencies in Hz */
static unsigned long tegra210_input_freq[] = {
[5] = 38400000,
[8] = 12000000,
};
static const char *mux_pllmcp_clkm[] = {
"pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", "pll_mb", "pll_mb",
"pll_p",
};
#define mux_pllmcp_clkm_idx NULL
#define PLL_ENABLE (1 << 30)
#define PLLCX_MISC1_IDDQ (1 << 27)
#define PLLCX_MISC0_RESET (1 << 30)
#define PLLCX_MISC0_DEFAULT_VALUE 0x40080000
#define PLLCX_MISC0_WRITE_MASK 0x400ffffb
#define PLLCX_MISC1_DEFAULT_VALUE 0x08000000
#define PLLCX_MISC1_WRITE_MASK 0x08003cff
#define PLLCX_MISC2_DEFAULT_VALUE 0x1f720f05
#define PLLCX_MISC2_WRITE_MASK 0xffffff17
#define PLLCX_MISC3_DEFAULT_VALUE 0x000000c4
#define PLLCX_MISC3_WRITE_MASK 0x00ffffff
/* PLLA */
#define PLLA_BASE_IDDQ (1 << 25)
#define PLLA_BASE_LOCK (1 << 27)
#define PLLA_MISC0_LOCK_ENABLE (1 << 28)
#define PLLA_MISC0_LOCK_OVERRIDE (1 << 27)
#define PLLA_MISC2_EN_SDM (1 << 26)
#define PLLA_MISC2_EN_DYNRAMP (1 << 25)
#define PLLA_MISC0_DEFAULT_VALUE 0x12000020
#define PLLA_MISC0_WRITE_MASK 0x7fffffff
#define PLLA_MISC2_DEFAULT_VALUE 0x0
#define PLLA_MISC2_WRITE_MASK 0x06ffffff
/* PLLD */
#define PLLD_MISC0_EN_SDM (1 << 16)
#define PLLD_MISC0_LOCK_OVERRIDE (1 << 17)
#define PLLD_MISC0_LOCK_ENABLE (1 << 18)
#define PLLD_MISC0_IDDQ (1 << 20)
#define PLLD_MISC0_DSI_CLKENABLE (1 << 21)
#define PLLD_MISC0_DEFAULT_VALUE 0x00140000
#define PLLD_MISC0_WRITE_MASK 0x3ff7ffff
#define PLLD_MISC1_DEFAULT_VALUE 0x20
#define PLLD_MISC1_WRITE_MASK 0x00ffffff
/* PLLD2 and PLLDP and PLLC4 */
#define PLLDSS_BASE_LOCK (1 << 27)
#define PLLDSS_BASE_LOCK_OVERRIDE (1 << 24)
#define PLLDSS_BASE_IDDQ (1 << 18)
#define PLLDSS_BASE_REF_SEL_SHIFT 25
#define PLLDSS_BASE_REF_SEL_MASK (0x3 << PLLDSS_BASE_REF_SEL_SHIFT)
#define PLLDSS_MISC0_LOCK_ENABLE (1 << 30)
#define PLLDSS_MISC1_CFG_EN_SDM (1 << 31)
#define PLLDSS_MISC1_CFG_EN_SSC (1 << 30)
#define PLLD2_MISC0_DEFAULT_VALUE 0x40000020
#define PLLD2_MISC1_CFG_DEFAULT_VALUE 0x10000000
#define PLLD2_MISC2_CTRL1_DEFAULT_VALUE 0x0
#define PLLD2_MISC3_CTRL2_DEFAULT_VALUE 0x0
#define PLLDP_MISC0_DEFAULT_VALUE 0x40000020
#define PLLDP_MISC1_CFG_DEFAULT_VALUE 0xc0000000
#define PLLDP_MISC2_CTRL1_DEFAULT_VALUE 0xf400f0da
#define PLLDP_MISC3_CTRL2_DEFAULT_VALUE 0x2004f400
#define PLLDSS_MISC0_WRITE_MASK 0x47ffffff
#define PLLDSS_MISC1_CFG_WRITE_MASK 0xf8000000
#define PLLDSS_MISC2_CTRL1_WRITE_MASK 0xffffffff
#define PLLDSS_MISC3_CTRL2_WRITE_MASK 0xffffffff
#define PLLC4_MISC0_DEFAULT_VALUE 0x40000000
/* PLLRE */
#define PLLRE_MISC0_LOCK_ENABLE (1 << 30)
#define PLLRE_MISC0_LOCK_OVERRIDE (1 << 29)
#define PLLRE_MISC0_LOCK (1 << 27)
#define PLLRE_MISC0_IDDQ (1 << 24)
#define PLLRE_BASE_DEFAULT_VALUE 0x0
#define PLLRE_MISC0_DEFAULT_VALUE 0x41000000
#define PLLRE_BASE_DEFAULT_MASK 0x1c000000
#define PLLRE_MISC0_WRITE_MASK 0x67ffffff
/* PLLX */
#define PLLX_USE_DYN_RAMP 1
#define PLLX_BASE_LOCK (1 << 27)
#define PLLX_MISC0_FO_G_DISABLE (0x1 << 28)
#define PLLX_MISC0_LOCK_ENABLE (0x1 << 18)
#define PLLX_MISC2_DYNRAMP_STEPB_SHIFT 24
#define PLLX_MISC2_DYNRAMP_STEPB_MASK (0xFF << PLLX_MISC2_DYNRAMP_STEPB_SHIFT)
#define PLLX_MISC2_DYNRAMP_STEPA_SHIFT 16
#define PLLX_MISC2_DYNRAMP_STEPA_MASK (0xFF << PLLX_MISC2_DYNRAMP_STEPA_SHIFT)
#define PLLX_MISC2_NDIV_NEW_SHIFT 8
#define PLLX_MISC2_NDIV_NEW_MASK (0xFF << PLLX_MISC2_NDIV_NEW_SHIFT)
#define PLLX_MISC2_LOCK_OVERRIDE (0x1 << 4)
#define PLLX_MISC2_DYNRAMP_DONE (0x1 << 2)
#define PLLX_MISC2_EN_DYNRAMP (0x1 << 0)
#define PLLX_MISC3_IDDQ (0x1 << 3)
#define PLLX_MISC0_DEFAULT_VALUE PLLX_MISC0_LOCK_ENABLE
#define PLLX_MISC0_WRITE_MASK 0x10c40000
#define PLLX_MISC1_DEFAULT_VALUE 0x20
#define PLLX_MISC1_WRITE_MASK 0x00ffffff
#define PLLX_MISC2_DEFAULT_VALUE 0x0
#define PLLX_MISC2_WRITE_MASK 0xffffff11
#define PLLX_MISC3_DEFAULT_VALUE PLLX_MISC3_IDDQ
#define PLLX_MISC3_WRITE_MASK 0x01ff0f0f
#define PLLX_MISC4_DEFAULT_VALUE 0x0
#define PLLX_MISC4_WRITE_MASK 0x8000ffff
#define PLLX_MISC5_DEFAULT_VALUE 0x0
#define PLLX_MISC5_WRITE_MASK 0x0000ffff
#define PLLX_HW_CTRL_CFG 0x548
#define PLLX_HW_CTRL_CFG_SWCTRL (0x1 << 0)
/* PLLMB */
#define PLLMB_BASE_LOCK (1 << 27)
#define PLLMB_MISC1_LOCK_OVERRIDE (1 << 18)
#define PLLMB_MISC1_IDDQ (1 << 17)
#define PLLMB_MISC1_LOCK_ENABLE (1 << 16)
#define PLLMB_MISC1_DEFAULT_VALUE 0x00030000
#define PLLMB_MISC1_WRITE_MASK 0x0007ffff
/* PLLP */
#define PLLP_BASE_OVERRIDE (1 << 28)
#define PLLP_BASE_LOCK (1 << 27)
#define PLLP_MISC0_LOCK_ENABLE (1 << 18)
#define PLLP_MISC0_LOCK_OVERRIDE (1 << 17)
#define PLLP_MISC0_IDDQ (1 << 3)
#define PLLP_MISC1_HSIO_EN_SHIFT 29
#define PLLP_MISC1_HSIO_EN (1 << PLLP_MISC1_HSIO_EN_SHIFT)
#define PLLP_MISC1_XUSB_EN_SHIFT 28
#define PLLP_MISC1_XUSB_EN (1 << PLLP_MISC1_XUSB_EN_SHIFT)
#define PLLP_MISC0_DEFAULT_VALUE 0x00040008
#define PLLP_MISC1_DEFAULT_VALUE 0x0
#define PLLP_MISC0_WRITE_MASK 0xdc6000f
#define PLLP_MISC1_WRITE_MASK 0x70ffffff
/* PLLU */
#define PLLU_BASE_LOCK (1 << 27)
#define PLLU_BASE_OVERRIDE (1 << 24)
#define PLLU_BASE_CLKENABLE_USB (1 << 21)
#define PLLU_BASE_CLKENABLE_HSIC (1 << 22)
#define PLLU_BASE_CLKENABLE_ICUSB (1 << 23)
#define PLLU_BASE_CLKENABLE_48M (1 << 25)
#define PLLU_BASE_CLKENABLE_ALL (PLLU_BASE_CLKENABLE_USB |\
PLLU_BASE_CLKENABLE_HSIC |\
PLLU_BASE_CLKENABLE_ICUSB |\
PLLU_BASE_CLKENABLE_48M)
#define PLLU_MISC0_IDDQ (1 << 31)
#define PLLU_MISC0_LOCK_ENABLE (1 << 29)
#define PLLU_MISC1_LOCK_OVERRIDE (1 << 0)
#define PLLU_MISC0_DEFAULT_VALUE 0xa0000000
#define PLLU_MISC1_DEFAULT_VALUE 0x0
#define PLLU_MISC0_WRITE_MASK 0xbfffffff
#define PLLU_MISC1_WRITE_MASK 0x00000007
void tegra210_xusb_pll_hw_control_enable(void)
{
u32 val;
val = readl_relaxed(clk_base + XUSBIO_PLL_CFG0);
val &= ~(XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL |
XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL);
val |= XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET |
XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ;
writel_relaxed(val, clk_base + XUSBIO_PLL_CFG0);
}
EXPORT_SYMBOL_GPL(tegra210_xusb_pll_hw_control_enable);
void tegra210_xusb_pll_hw_sequence_start(void)
{
u32 val;
val = readl_relaxed(clk_base + XUSBIO_PLL_CFG0);
val |= XUSBIO_PLL_CFG0_SEQ_ENABLE;
writel_relaxed(val, clk_base + XUSBIO_PLL_CFG0);
}
EXPORT_SYMBOL_GPL(tegra210_xusb_pll_hw_sequence_start);
void tegra210_sata_pll_hw_control_enable(void)
{
u32 val;
val = readl_relaxed(clk_base + SATA_PLL_CFG0);
val &= ~SATA_PLL_CFG0_PADPLL_RESET_SWCTL;
val |= SATA_PLL_CFG0_PADPLL_USE_LOCKDET |
SATA_PLL_CFG0_PADPLL_SLEEP_IDDQ;
writel_relaxed(val, clk_base + SATA_PLL_CFG0);
}
EXPORT_SYMBOL_GPL(tegra210_sata_pll_hw_control_enable);
void tegra210_sata_pll_hw_sequence_start(void)
{
u32 val;
val = readl_relaxed(clk_base + SATA_PLL_CFG0);
val |= SATA_PLL_CFG0_SEQ_ENABLE;
writel_relaxed(val, clk_base + SATA_PLL_CFG0);
}
EXPORT_SYMBOL_GPL(tegra210_sata_pll_hw_sequence_start);
static inline void _pll_misc_chk_default(void __iomem *base,
struct tegra_clk_pll_params *params,
u8 misc_num, u32 default_val, u32 mask)
{
u32 boot_val = readl_relaxed(base + params->ext_misc_reg[misc_num]);
boot_val &= mask;
default_val &= mask;
if (boot_val != default_val) {
pr_warn("boot misc%d 0x%x: expected 0x%x\n",
misc_num, boot_val, default_val);
pr_warn(" (comparison mask = 0x%x)\n", mask);
params->defaults_set = false;
}
}
/*
* PLLCX: PLLC, PLLC2, PLLC3, PLLA1
* Hybrid PLLs with dynamic ramp. Dynamic ramp is allowed for any transition
* that changes NDIV only, while PLL is already locked.
*/
static void pllcx_check_defaults(struct tegra_clk_pll_params *params)
{
u32 default_val;
default_val = PLLCX_MISC0_DEFAULT_VALUE & (~PLLCX_MISC0_RESET);
_pll_misc_chk_default(clk_base, params, 0, default_val,
PLLCX_MISC0_WRITE_MASK);
default_val = PLLCX_MISC1_DEFAULT_VALUE & (~PLLCX_MISC1_IDDQ);
_pll_misc_chk_default(clk_base, params, 1, default_val,
PLLCX_MISC1_WRITE_MASK);
default_val = PLLCX_MISC2_DEFAULT_VALUE;
_pll_misc_chk_default(clk_base, params, 2, default_val,
PLLCX_MISC2_WRITE_MASK);
default_val = PLLCX_MISC3_DEFAULT_VALUE;
_pll_misc_chk_default(clk_base, params, 3, default_val,
PLLCX_MISC3_WRITE_MASK);
}
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void tegra210_pllcx_set_defaults(const char *name,
struct tegra_clk_pll *pllcx)
{
pllcx->params->defaults_set = true;
if (readl_relaxed(clk_base + pllcx->params->base_reg) &
PLL_ENABLE) {
/* PLL is ON: only check if defaults already set */
pllcx_check_defaults(pllcx->params);
pr_warn("%s already enabled. Postponing set full defaults\n",
name);
return;
}
/* Defaults assert PLL reset, and set IDDQ */
writel_relaxed(PLLCX_MISC0_DEFAULT_VALUE,
clk_base + pllcx->params->ext_misc_reg[0]);
writel_relaxed(PLLCX_MISC1_DEFAULT_VALUE,
clk_base + pllcx->params->ext_misc_reg[1]);
writel_relaxed(PLLCX_MISC2_DEFAULT_VALUE,
clk_base + pllcx->params->ext_misc_reg[2]);
writel_relaxed(PLLCX_MISC3_DEFAULT_VALUE,
clk_base + pllcx->params->ext_misc_reg[3]);
udelay(1);
}
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void _pllc_set_defaults(struct tegra_clk_pll *pllcx)
{
tegra210_pllcx_set_defaults("PLL_C", pllcx);
}
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void _pllc2_set_defaults(struct tegra_clk_pll *pllcx)
{
tegra210_pllcx_set_defaults("PLL_C2", pllcx);
}
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void _pllc3_set_defaults(struct tegra_clk_pll *pllcx)
{
tegra210_pllcx_set_defaults("PLL_C3", pllcx);
}
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void _plla1_set_defaults(struct tegra_clk_pll *pllcx)
{
tegra210_pllcx_set_defaults("PLL_A1", pllcx);
}
/*
* PLLA
* PLL with dynamic ramp and fractional SDM. Dynamic ramp is not used.
* Fractional SDM is allowed to provide exact audio rates.
*/
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void tegra210_plla_set_defaults(struct tegra_clk_pll *plla)
{
u32 mask;
u32 val = readl_relaxed(clk_base + plla->params->base_reg);
plla->params->defaults_set = true;
if (val & PLL_ENABLE) {
/*
* PLL is ON: check if defaults already set, then set those
* that can be updated in flight.
*/
if (val & PLLA_BASE_IDDQ) {
pr_warn("PLL_A boot enabled with IDDQ set\n");
plla->params->defaults_set = false;
}
pr_warn("PLL_A already enabled. Postponing set full defaults\n");
val = PLLA_MISC0_DEFAULT_VALUE; /* ignore lock enable */
mask = PLLA_MISC0_LOCK_ENABLE | PLLA_MISC0_LOCK_OVERRIDE;
_pll_misc_chk_default(clk_base, plla->params, 0, val,
~mask & PLLA_MISC0_WRITE_MASK);
val = PLLA_MISC2_DEFAULT_VALUE; /* ignore all but control bit */
_pll_misc_chk_default(clk_base, plla->params, 2, val,
PLLA_MISC2_EN_DYNRAMP);
/* Enable lock detect */
val = readl_relaxed(clk_base + plla->params->ext_misc_reg[0]);
val &= ~mask;
val |= PLLA_MISC0_DEFAULT_VALUE & mask;
writel_relaxed(val, clk_base + plla->params->ext_misc_reg[0]);
udelay(1);
return;
}
/* set IDDQ, enable lock detect, disable dynamic ramp and SDM */
val |= PLLA_BASE_IDDQ;
writel_relaxed(val, clk_base + plla->params->base_reg);
writel_relaxed(PLLA_MISC0_DEFAULT_VALUE,
clk_base + plla->params->ext_misc_reg[0]);
writel_relaxed(PLLA_MISC2_DEFAULT_VALUE,
clk_base + plla->params->ext_misc_reg[2]);
udelay(1);
}
/*
* PLLD
* PLL with fractional SDM.
*/
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void tegra210_plld_set_defaults(struct tegra_clk_pll *plld)
{
u32 val;
u32 mask = 0xffff;
plld->params->defaults_set = true;
if (readl_relaxed(clk_base + plld->params->base_reg) &
PLL_ENABLE) {
pr_warn("PLL_D already enabled. Postponing set full defaults\n");
/*
* PLL is ON: check if defaults already set, then set those
* that can be updated in flight.
*/
val = PLLD_MISC1_DEFAULT_VALUE;
_pll_misc_chk_default(clk_base, plld->params, 1,
val, PLLD_MISC1_WRITE_MASK);
/* ignore lock, DSI and SDM controls, make sure IDDQ not set */
val = PLLD_MISC0_DEFAULT_VALUE & (~PLLD_MISC0_IDDQ);
mask |= PLLD_MISC0_DSI_CLKENABLE | PLLD_MISC0_LOCK_ENABLE |
PLLD_MISC0_LOCK_OVERRIDE | PLLD_MISC0_EN_SDM;
_pll_misc_chk_default(clk_base, plld->params, 0, val,
~mask & PLLD_MISC0_WRITE_MASK);
/* Enable lock detect */
mask = PLLD_MISC0_LOCK_ENABLE | PLLD_MISC0_LOCK_OVERRIDE;
val = readl_relaxed(clk_base + plld->params->ext_misc_reg[0]);
val &= ~mask;
val |= PLLD_MISC0_DEFAULT_VALUE & mask;
writel_relaxed(val, clk_base + plld->params->ext_misc_reg[0]);
udelay(1);
return;
}
val = readl_relaxed(clk_base + plld->params->ext_misc_reg[0]);
val &= PLLD_MISC0_DSI_CLKENABLE;
val |= PLLD_MISC0_DEFAULT_VALUE;
/* set IDDQ, enable lock detect, disable SDM */
writel_relaxed(val, clk_base + plld->params->ext_misc_reg[0]);
writel_relaxed(PLLD_MISC1_DEFAULT_VALUE, clk_base +
plld->params->ext_misc_reg[1]);
udelay(1);
}
/*
* PLLD2, PLLDP
* PLL with fractional SDM and Spread Spectrum (SDM is a must if SSC is used).
*/
static void plldss_defaults(const char *pll_name, struct tegra_clk_pll *plldss,
u32 misc0_val, u32 misc1_val, u32 misc2_val, u32 misc3_val)
{
u32 default_val;
u32 val = readl_relaxed(clk_base + plldss->params->base_reg);
plldss->params->defaults_set = true;
if (val & PLL_ENABLE) {
pr_warn("%s already enabled. Postponing set full defaults\n",
pll_name);
/*
* PLL is ON: check if defaults already set, then set those
* that can be updated in flight.
*/
if (val & PLLDSS_BASE_IDDQ) {
pr_warn("plldss boot enabled with IDDQ set\n");
plldss->params->defaults_set = false;
}
/* ignore lock enable */
default_val = misc0_val;
_pll_misc_chk_default(clk_base, plldss->params, 0, default_val,
PLLDSS_MISC0_WRITE_MASK &
(~PLLDSS_MISC0_LOCK_ENABLE));
/*
* If SSC is used, check all settings, otherwise just confirm
* that SSC is not used on boot as well. Do nothing when using
* this function for PLLC4 that has only MISC0.
*/
if (plldss->params->ssc_ctrl_en_mask) {
default_val = misc1_val;
_pll_misc_chk_default(clk_base, plldss->params, 1,
default_val, PLLDSS_MISC1_CFG_WRITE_MASK);
default_val = misc2_val;
_pll_misc_chk_default(clk_base, plldss->params, 2,
default_val, PLLDSS_MISC2_CTRL1_WRITE_MASK);
default_val = misc3_val;
_pll_misc_chk_default(clk_base, plldss->params, 3,
default_val, PLLDSS_MISC3_CTRL2_WRITE_MASK);
} else if (plldss->params->ext_misc_reg[1]) {
default_val = misc1_val;
_pll_misc_chk_default(clk_base, plldss->params, 1,
default_val, PLLDSS_MISC1_CFG_WRITE_MASK &
(~PLLDSS_MISC1_CFG_EN_SDM));
}
/* Enable lock detect */
if (val & PLLDSS_BASE_LOCK_OVERRIDE) {
val &= ~PLLDSS_BASE_LOCK_OVERRIDE;
writel_relaxed(val, clk_base +
plldss->params->base_reg);
}
val = readl_relaxed(clk_base + plldss->params->ext_misc_reg[0]);
val &= ~PLLDSS_MISC0_LOCK_ENABLE;
val |= misc0_val & PLLDSS_MISC0_LOCK_ENABLE;
writel_relaxed(val, clk_base + plldss->params->ext_misc_reg[0]);
udelay(1);
return;
}
/* set IDDQ, enable lock detect, configure SDM/SSC */
val |= PLLDSS_BASE_IDDQ;
val &= ~PLLDSS_BASE_LOCK_OVERRIDE;
writel_relaxed(val, clk_base + plldss->params->base_reg);
/* When using this function for PLLC4 exit here */
if (!plldss->params->ext_misc_reg[1]) {
writel_relaxed(misc0_val, clk_base +
plldss->params->ext_misc_reg[0]);
udelay(1);
return;
}
writel_relaxed(misc0_val, clk_base +
plldss->params->ext_misc_reg[0]);
/* if SSC used set by 1st enable */
writel_relaxed(misc1_val & (~PLLDSS_MISC1_CFG_EN_SSC),
clk_base + plldss->params->ext_misc_reg[1]);
writel_relaxed(misc2_val, clk_base + plldss->params->ext_misc_reg[2]);
writel_relaxed(misc3_val, clk_base + plldss->params->ext_misc_reg[3]);
udelay(1);
}
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void tegra210_plld2_set_defaults(struct tegra_clk_pll *plld2)
{
plldss_defaults("PLL_D2", plld2, PLLD2_MISC0_DEFAULT_VALUE,
PLLD2_MISC1_CFG_DEFAULT_VALUE,
PLLD2_MISC2_CTRL1_DEFAULT_VALUE,
PLLD2_MISC3_CTRL2_DEFAULT_VALUE);
}
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void tegra210_plldp_set_defaults(struct tegra_clk_pll *plldp)
{
plldss_defaults("PLL_DP", plldp, PLLDP_MISC0_DEFAULT_VALUE,
PLLDP_MISC1_CFG_DEFAULT_VALUE,
PLLDP_MISC2_CTRL1_DEFAULT_VALUE,
PLLDP_MISC3_CTRL2_DEFAULT_VALUE);
}
/*
* PLLC4
* Base and misc0 layout is the same as PLLD2/PLLDP, but no SDM/SSC support.
* VCO is exposed to the clock tree via fixed 1/3 and 1/5 dividers.
*/
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void tegra210_pllc4_set_defaults(struct tegra_clk_pll *pllc4)
{
plldss_defaults("PLL_C4", pllc4, PLLC4_MISC0_DEFAULT_VALUE, 0, 0, 0);
}
/*
* PLLRE
* VCO is exposed to the clock tree directly along with post-divider output
*/
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void tegra210_pllre_set_defaults(struct tegra_clk_pll *pllre)
{
u32 mask;
u32 val = readl_relaxed(clk_base + pllre->params->base_reg);
pllre->params->defaults_set = true;
if (val & PLL_ENABLE) {
pr_warn("PLL_RE already enabled. Postponing set full defaults\n");
/*
* PLL is ON: check if defaults already set, then set those
* that can be updated in flight.
*/
val &= PLLRE_BASE_DEFAULT_MASK;
if (val != PLLRE_BASE_DEFAULT_VALUE) {
pr_warn("pllre boot base 0x%x : expected 0x%x\n",
val, PLLRE_BASE_DEFAULT_VALUE);
pr_warn("(comparison mask = 0x%x)\n",
PLLRE_BASE_DEFAULT_MASK);
pllre->params->defaults_set = false;
}
/* Ignore lock enable */
val = PLLRE_MISC0_DEFAULT_VALUE & (~PLLRE_MISC0_IDDQ);
mask = PLLRE_MISC0_LOCK_ENABLE | PLLRE_MISC0_LOCK_OVERRIDE;
_pll_misc_chk_default(clk_base, pllre->params, 0, val,
~mask & PLLRE_MISC0_WRITE_MASK);
/* Enable lock detect */
val = readl_relaxed(clk_base + pllre->params->ext_misc_reg[0]);
val &= ~mask;
val |= PLLRE_MISC0_DEFAULT_VALUE & mask;
writel_relaxed(val, clk_base + pllre->params->ext_misc_reg[0]);
udelay(1);
return;
}
/* set IDDQ, enable lock detect */
val &= ~PLLRE_BASE_DEFAULT_MASK;
val |= PLLRE_BASE_DEFAULT_VALUE & PLLRE_BASE_DEFAULT_MASK;
writel_relaxed(val, clk_base + pllre->params->base_reg);
writel_relaxed(PLLRE_MISC0_DEFAULT_VALUE,
clk_base + pllre->params->ext_misc_reg[0]);
udelay(1);
}
static void pllx_get_dyn_steps(struct clk_hw *hw, u32 *step_a, u32 *step_b)
{
unsigned long input_rate;
/* cf rate */
if (!IS_ERR_OR_NULL(hw->clk))
input_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
else
input_rate = 38400000;
input_rate /= tegra_pll_get_fixed_mdiv(hw, input_rate);
switch (input_rate) {
case 12000000:
case 12800000:
case 13000000:
*step_a = 0x2B;
*step_b = 0x0B;
return;
case 19200000:
*step_a = 0x12;
*step_b = 0x08;
return;
case 38400000:
*step_a = 0x04;
*step_b = 0x05;
return;
default:
pr_err("%s: Unexpected reference rate %lu\n",
__func__, input_rate);
BUG();
}
}
static void pllx_check_defaults(struct tegra_clk_pll *pll)
{
u32 default_val;
default_val = PLLX_MISC0_DEFAULT_VALUE;
/* ignore lock enable */
_pll_misc_chk_default(clk_base, pll->params, 0, default_val,
PLLX_MISC0_WRITE_MASK & (~PLLX_MISC0_LOCK_ENABLE));
default_val = PLLX_MISC1_DEFAULT_VALUE;
_pll_misc_chk_default(clk_base, pll->params, 1, default_val,
PLLX_MISC1_WRITE_MASK);
/* ignore all but control bit */
default_val = PLLX_MISC2_DEFAULT_VALUE;
_pll_misc_chk_default(clk_base, pll->params, 2,
default_val, PLLX_MISC2_EN_DYNRAMP);
default_val = PLLX_MISC3_DEFAULT_VALUE & (~PLLX_MISC3_IDDQ);
_pll_misc_chk_default(clk_base, pll->params, 3, default_val,
PLLX_MISC3_WRITE_MASK);
default_val = PLLX_MISC4_DEFAULT_VALUE;
_pll_misc_chk_default(clk_base, pll->params, 4, default_val,
PLLX_MISC4_WRITE_MASK);
default_val = PLLX_MISC5_DEFAULT_VALUE;
_pll_misc_chk_default(clk_base, pll->params, 5, default_val,
PLLX_MISC5_WRITE_MASK);
}
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void tegra210_pllx_set_defaults(struct tegra_clk_pll *pllx)
{
u32 val;
u32 step_a, step_b;
pllx->params->defaults_set = true;
/* Get ready dyn ramp state machine settings */
pllx_get_dyn_steps(&pllx->hw, &step_a, &step_b);
val = PLLX_MISC2_DEFAULT_VALUE & (~PLLX_MISC2_DYNRAMP_STEPA_MASK) &
(~PLLX_MISC2_DYNRAMP_STEPB_MASK);
val |= step_a << PLLX_MISC2_DYNRAMP_STEPA_SHIFT;
val |= step_b << PLLX_MISC2_DYNRAMP_STEPB_SHIFT;
if (readl_relaxed(clk_base + pllx->params->base_reg) & PLL_ENABLE) {
pr_warn("PLL_X already enabled. Postponing set full defaults\n");
/*
* PLL is ON: check if defaults already set, then set those
* that can be updated in flight.
*/
pllx_check_defaults(pllx);
/* Configure dyn ramp, disable lock override */
writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]);
/* Enable lock detect */
val = readl_relaxed(clk_base + pllx->params->ext_misc_reg[0]);
val &= ~PLLX_MISC0_LOCK_ENABLE;
val |= PLLX_MISC0_DEFAULT_VALUE & PLLX_MISC0_LOCK_ENABLE;
writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[0]);
udelay(1);
return;
}
/* Enable lock detect and CPU output */
writel_relaxed(PLLX_MISC0_DEFAULT_VALUE, clk_base +
pllx->params->ext_misc_reg[0]);
/* Setup */
writel_relaxed(PLLX_MISC1_DEFAULT_VALUE, clk_base +
pllx->params->ext_misc_reg[1]);
/* Configure dyn ramp state machine, disable lock override */
writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]);
/* Set IDDQ */
writel_relaxed(PLLX_MISC3_DEFAULT_VALUE, clk_base +
pllx->params->ext_misc_reg[3]);
/* Disable SDM */
writel_relaxed(PLLX_MISC4_DEFAULT_VALUE, clk_base +
pllx->params->ext_misc_reg[4]);
writel_relaxed(PLLX_MISC5_DEFAULT_VALUE, clk_base +
pllx->params->ext_misc_reg[5]);
udelay(1);
}
/* PLLMB */
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void tegra210_pllmb_set_defaults(struct tegra_clk_pll *pllmb)
{
u32 mask, val = readl_relaxed(clk_base + pllmb->params->base_reg);
pllmb->params->defaults_set = true;
if (val & PLL_ENABLE) {
pr_warn("PLL_MB already enabled. Postponing set full defaults\n");
/*
* PLL is ON: check if defaults already set, then set those
* that can be updated in flight.
*/
val = PLLMB_MISC1_DEFAULT_VALUE & (~PLLMB_MISC1_IDDQ);
mask = PLLMB_MISC1_LOCK_ENABLE | PLLMB_MISC1_LOCK_OVERRIDE;
_pll_misc_chk_default(clk_base, pllmb->params, 0, val,
~mask & PLLMB_MISC1_WRITE_MASK);
/* Enable lock detect */
val = readl_relaxed(clk_base + pllmb->params->ext_misc_reg[0]);
val &= ~mask;
val |= PLLMB_MISC1_DEFAULT_VALUE & mask;
writel_relaxed(val, clk_base + pllmb->params->ext_misc_reg[0]);
udelay(1);
return;
}
/* set IDDQ, enable lock detect */
writel_relaxed(PLLMB_MISC1_DEFAULT_VALUE,
clk_base + pllmb->params->ext_misc_reg[0]);
udelay(1);
}
/*
* PLLP
* VCO is exposed to the clock tree directly along with post-divider output.
* Both VCO and post-divider output rates are fixed at 408MHz and 204MHz,
* respectively.
*/
static void pllp_check_defaults(struct tegra_clk_pll *pll, bool enabled)
{
u32 val, mask;
/* Ignore lock enable (will be set), make sure not in IDDQ if enabled */
val = PLLP_MISC0_DEFAULT_VALUE & (~PLLP_MISC0_IDDQ);
mask = PLLP_MISC0_LOCK_ENABLE | PLLP_MISC0_LOCK_OVERRIDE;
if (!enabled)
mask |= PLLP_MISC0_IDDQ;
_pll_misc_chk_default(clk_base, pll->params, 0, val,
~mask & PLLP_MISC0_WRITE_MASK);
/* Ignore branch controls */
val = PLLP_MISC1_DEFAULT_VALUE;
mask = PLLP_MISC1_HSIO_EN | PLLP_MISC1_XUSB_EN;
_pll_misc_chk_default(clk_base, pll->params, 1, val,
~mask & PLLP_MISC1_WRITE_MASK);
}
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void tegra210_pllp_set_defaults(struct tegra_clk_pll *pllp)
{
u32 mask;
u32 val = readl_relaxed(clk_base + pllp->params->base_reg);
pllp->params->defaults_set = true;
if (val & PLL_ENABLE) {
pr_warn("PLL_P already enabled. Postponing set full defaults\n");
/*
* PLL is ON: check if defaults already set, then set those
* that can be updated in flight.
*/
pllp_check_defaults(pllp, true);
/* Enable lock detect */
val = readl_relaxed(clk_base + pllp->params->ext_misc_reg[0]);
mask = PLLP_MISC0_LOCK_ENABLE | PLLP_MISC0_LOCK_OVERRIDE;
val &= ~mask;
val |= PLLP_MISC0_DEFAULT_VALUE & mask;
writel_relaxed(val, clk_base + pllp->params->ext_misc_reg[0]);
udelay(1);
return;
}
/* set IDDQ, enable lock detect */
writel_relaxed(PLLP_MISC0_DEFAULT_VALUE,
clk_base + pllp->params->ext_misc_reg[0]);
/* Preserve branch control */
val = readl_relaxed(clk_base + pllp->params->ext_misc_reg[1]);
mask = PLLP_MISC1_HSIO_EN | PLLP_MISC1_XUSB_EN;
val &= mask;
val |= ~mask & PLLP_MISC1_DEFAULT_VALUE;
writel_relaxed(val, clk_base + pllp->params->ext_misc_reg[1]);
udelay(1);
}
/*
* PLLU
* VCO is exposed to the clock tree directly along with post-divider output.
* Both VCO and post-divider output rates are fixed at 480MHz and 240MHz,
* respectively.
*/
static void pllu_check_defaults(struct tegra_clk_pll *pll, bool hw_control)
{
u32 val, mask;
/* Ignore lock enable (will be set) and IDDQ if under h/w control */
val = PLLU_MISC0_DEFAULT_VALUE & (~PLLU_MISC0_IDDQ);
mask = PLLU_MISC0_LOCK_ENABLE | (hw_control ? PLLU_MISC0_IDDQ : 0);
_pll_misc_chk_default(clk_base, pll->params, 0, val,
~mask & PLLU_MISC0_WRITE_MASK);
val = PLLU_MISC1_DEFAULT_VALUE;
mask = PLLU_MISC1_LOCK_OVERRIDE;
_pll_misc_chk_default(clk_base, pll->params, 1, val,
~mask & PLLU_MISC1_WRITE_MASK);
}
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static void tegra210_pllu_set_defaults(struct tegra_clk_pll *pllu)
{
u32 val = readl_relaxed(clk_base + pllu->params->base_reg);
pllu->params->defaults_set = true;
if (val & PLL_ENABLE) {
pr_warn("PLL_U already enabled. Postponing set full defaults\n");
/*
* PLL is ON: check if defaults already set, then set those
* that can be updated in flight.
*/
pllu_check_defaults(pllu, false);
/* Enable lock detect */
val = readl_relaxed(clk_base + pllu->params->ext_misc_reg[0]);
val &= ~PLLU_MISC0_LOCK_ENABLE;
val |= PLLU_MISC0_DEFAULT_VALUE & PLLU_MISC0_LOCK_ENABLE;
writel_relaxed(val, clk_base + pllu->params->ext_misc_reg[0]);
val = readl_relaxed(clk_base + pllu->params->ext_misc_reg[1]);
val &= ~PLLU_MISC1_LOCK_OVERRIDE;
val |= PLLU_MISC1_DEFAULT_VALUE & PLLU_MISC1_LOCK_OVERRIDE;
writel_relaxed(val, clk_base + pllu->params->ext_misc_reg[1]);
udelay(1);
return;
}
/* set IDDQ, enable lock detect */
writel_relaxed(PLLU_MISC0_DEFAULT_VALUE,
clk_base + pllu->params->ext_misc_reg[0]);
writel_relaxed(PLLU_MISC1_DEFAULT_VALUE,
clk_base + pllu->params->ext_misc_reg[1]);
udelay(1);
}
#define mask(w) ((1 << (w)) - 1)
#define divm_mask(p) mask(p->params->div_nmp->divm_width)
#define divn_mask(p) mask(p->params->div_nmp->divn_width)
#define divp_mask(p) (p->params->flags & TEGRA_PLLU ? PLLU_POST_DIVP_MASK :\
mask(p->params->div_nmp->divp_width))
#define divm_shift(p) ((p)->params->div_nmp->divm_shift)
#define divn_shift(p) ((p)->params->div_nmp->divn_shift)
#define divp_shift(p) ((p)->params->div_nmp->divp_shift)
#define divm_mask_shifted(p) (divm_mask(p) << divm_shift(p))
#define divn_mask_shifted(p) (divn_mask(p) << divn_shift(p))
#define divp_mask_shifted(p) (divp_mask(p) << divp_shift(p))
#define PLL_LOCKDET_DELAY 2 /* Lock detection safety delays */
static int tegra210_wait_for_mask(struct tegra_clk_pll *pll,
u32 reg, u32 mask)
{
int i;
u32 val = 0;
for (i = 0; i < pll->params->lock_delay / PLL_LOCKDET_DELAY + 1; i++) {
udelay(PLL_LOCKDET_DELAY);
val = readl_relaxed(clk_base + reg);
if ((val & mask) == mask) {
udelay(PLL_LOCKDET_DELAY);
return 0;
}
}
return -ETIMEDOUT;
}
static int tegra210_pllx_dyn_ramp(struct tegra_clk_pll *pllx,
struct tegra_clk_pll_freq_table *cfg)
{
u32 val, base, ndiv_new_mask;
ndiv_new_mask = (divn_mask(pllx) >> pllx->params->div_nmp->divn_shift)
<< PLLX_MISC2_NDIV_NEW_SHIFT;
val = readl_relaxed(clk_base + pllx->params->ext_misc_reg[2]);
val &= (~ndiv_new_mask);
val |= cfg->n << PLLX_MISC2_NDIV_NEW_SHIFT;
writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]);
udelay(1);
val = readl_relaxed(clk_base + pllx->params->ext_misc_reg[2]);
val |= PLLX_MISC2_EN_DYNRAMP;
writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]);
udelay(1);
tegra210_wait_for_mask(pllx, pllx->params->ext_misc_reg[2],
PLLX_MISC2_DYNRAMP_DONE);
base = readl_relaxed(clk_base + pllx->params->base_reg) &
(~divn_mask_shifted(pllx));
base |= cfg->n << pllx->params->div_nmp->divn_shift;
writel_relaxed(base, clk_base + pllx->params->base_reg);
udelay(1);
val &= ~PLLX_MISC2_EN_DYNRAMP;
writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]);
udelay(1);
pr_debug("%s: dynamic ramp to m = %u n = %u p = %u, Fout = %lu kHz\n",
__clk_get_name(pllx->hw.clk), cfg->m, cfg->n, cfg->p,
cfg->input_rate / cfg->m * cfg->n /
pllx->params->pdiv_tohw[cfg->p].pdiv / 1000);
return 0;
}
/*
* Common configuration for PLLs with fixed input divider policy:
* - always set fixed M-value based on the reference rate
* - always set P-value value 1:1 for output rates above VCO minimum, and
* choose minimum necessary P-value for output rates below VCO maximum
* - calculate N-value based on selected M and P
* - calculate SDM_DIN fractional part
*/
static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw,
struct tegra_clk_pll_freq_table *cfg,
unsigned long rate, unsigned long input_rate)
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
struct tegra_clk_pll_params *params = pll->params;
int p;
unsigned long cf, p_rate;
u32 pdiv;
if (!rate)
return -EINVAL;
if (!(params->flags & TEGRA_PLL_VCO_OUT)) {
p = DIV_ROUND_UP(params->vco_min, rate);
p = params->round_p_to_pdiv(p, &pdiv);
} else {
p = rate >= params->vco_min ? 1 : -EINVAL;
}
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 21:23:25 +00:00
if (p < 0)
return -EINVAL;
cfg->m = tegra_pll_get_fixed_mdiv(hw, input_rate);
cfg->p = p;
/* Store P as HW value, as that is what is expected */
cfg->p = tegra_pll_p_div_to_hw(pll, cfg->p);
p_rate = rate * p;
if (p_rate > params->vco_max)
p_rate = params->vco_max;
cf = input_rate / cfg->m;
cfg->n = p_rate / cf;
cfg->sdm_data = 0;
if (params->sdm_ctrl_reg) {
unsigned long rem = p_rate - cf * cfg->n;
/* If ssc is enabled SDM enabled as well, even for integer n */
if (rem || params->ssc_ctrl_reg) {
u64 s = rem * PLL_SDM_COEFF;
do_div(s, cf);
s -= PLL_SDM_COEFF / 2;
cfg->sdm_data = sdin_din_to_data(s);
}
}
cfg->input_rate = input_rate;
cfg->output_rate = rate;
return 0;
}
/*
* clk_pll_set_gain - set gain to m, n to calculate correct VCO rate
*
* @cfg: struct tegra_clk_pll_freq_table * cfg
*
* For Normal mode:
* Fvco = Fref * NDIV / MDIV
*
* For fractional mode:
* Fvco = Fref * (NDIV + 0.5 + SDM_DIN / PLL_SDM_COEFF) / MDIV
*/
static void tegra210_clk_pll_set_gain(struct tegra_clk_pll_freq_table *cfg)
{
cfg->n = cfg->n * PLL_SDM_COEFF + PLL_SDM_COEFF/2 +
sdin_data_to_din(cfg->sdm_data);
cfg->m *= PLL_SDM_COEFF;
}
clk: tegra: Fix sparse warnings for functions not declared as static Sparse reports the following warnings for functions in clk-tegra210.c that should be declared as static: drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol 'tegra210_pllcx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol '_pllc_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol '_pllc2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol '_pllc3_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol '_plla1_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol 'tegra210_plla_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol 'tegra210_plld_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol 'tegra210_plld2_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol 'tegra210_plldp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol 'tegra210_pllc4_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol 'tegra210_pllre_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol 'tegra210_pllx_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol 'tegra210_pllmb_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol 'tegra210_pllp_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol 'tegra210_pllu_set_defaults' was not declared. Should it be static? drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol 'tegra210_clk_adjust_vco_min' was not declared. Should it be static? Fix this by declaring the above as static. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-04 17:04:24 +00:00
static unsigned long
tegra210_clk_adjust_vco_min(struct tegra_clk_pll_params *params,
unsigned long parent_rate)
{
unsigned long vco_min = params->vco_min;
params->vco_min += DIV_ROUND_UP(parent_rate, PLL_SDM_COEFF);
vco_min = min(vco_min, params->vco_min);
return vco_min;
}
static struct div_nmp pllx_nmp = {
.divm_shift = 0,
.divm_width = 8,
.divn_shift = 8,
.divn_width = 8,
.divp_shift = 20,
.divp_width = 5,
};
/*
* PLL post divider maps - two types: quasi-linear and exponential
* post divider.
*/
#define PLL_QLIN_PDIV_MAX 16
static const struct pdiv_map pll_qlin_pdiv_to_hw[] = {
{ .pdiv = 1, .hw_val = 0 },
{ .pdiv = 2, .hw_val = 1 },
{ .pdiv = 3, .hw_val = 2 },
{ .pdiv = 4, .hw_val = 3 },
{ .pdiv = 5, .hw_val = 4 },
{ .pdiv = 6, .hw_val = 5 },
{ .pdiv = 8, .hw_val = 6 },
{ .pdiv = 9, .hw_val = 7 },
{ .pdiv = 10, .hw_val = 8 },
{ .pdiv = 12, .hw_val = 9 },
{ .pdiv = 15, .hw_val = 10 },
{ .pdiv = 16, .hw_val = 11 },
{ .pdiv = 18, .hw_val = 12 },
{ .pdiv = 20, .hw_val = 13 },
{ .pdiv = 24, .hw_val = 14 },
{ .pdiv = 30, .hw_val = 15 },
{ .pdiv = 32, .hw_val = 16 },
};
static u32 pll_qlin_p_to_pdiv(u32 p, u32 *pdiv)
{
int i;
if (p) {
for (i = 0; i <= PLL_QLIN_PDIV_MAX; i++) {
if (p <= pll_qlin_pdiv_to_hw[i].pdiv) {
if (pdiv)
*pdiv = i;
return pll_qlin_pdiv_to_hw[i].pdiv;
}
}
}
return -EINVAL;
}
#define PLL_EXPO_PDIV_MAX 7
static const struct pdiv_map pll_expo_pdiv_to_hw[] = {
{ .pdiv = 1, .hw_val = 0 },
{ .pdiv = 2, .hw_val = 1 },
{ .pdiv = 4, .hw_val = 2 },
{ .pdiv = 8, .hw_val = 3 },
{ .pdiv = 16, .hw_val = 4 },
{ .pdiv = 32, .hw_val = 5 },
{ .pdiv = 64, .hw_val = 6 },
{ .pdiv = 128, .hw_val = 7 },
};
static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv)
{
if (p) {
u32 i = fls(p);
if (i == ffs(p))
i--;
if (i <= PLL_EXPO_PDIV_MAX) {
if (pdiv)
*pdiv = i;
return 1 << i;
}
}
return -EINVAL;
}
static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
/* 1 GHz */
{ 12000000, 1000000000, 166, 1, 2, 0 }, /* actual: 996.0 MHz */
{ 13000000, 1000000000, 153, 1, 2, 0 }, /* actual: 994.0 MHz */
{ 38400000, 1000000000, 156, 3, 2, 0 }, /* actual: 998.4 MHz */
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_params pll_x_params = {
.input_min = 12000000,
.input_max = 800000000,
.cf_min = 12000000,
.cf_max = 38400000,
.vco_min = 1350000000,
.vco_max = 3000000000UL,
.base_reg = PLLX_BASE,
.misc_reg = PLLX_MISC0,
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
.ext_misc_reg[0] = PLLX_MISC0,
.ext_misc_reg[1] = PLLX_MISC1,
.ext_misc_reg[2] = PLLX_MISC2,
.ext_misc_reg[3] = PLLX_MISC3,
.ext_misc_reg[4] = PLLX_MISC4,
.ext_misc_reg[5] = PLLX_MISC5,
.iddq_reg = PLLX_MISC3,
.iddq_bit_idx = PLLXP_IDDQ_BIT,
.max_p = PLL_QLIN_PDIV_MAX,
.mdiv_default = 2,
.dyn_ramp_reg = PLLX_MISC2,
.stepa_shift = 16,
.stepb_shift = 24,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllx_nmp,
.freq_table = pll_x_freq_table,
.flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
.dyn_ramp = tegra210_pllx_dyn_ramp,
.set_defaults = tegra210_pllx_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct div_nmp pllc_nmp = {
.divm_shift = 0,
.divm_width = 8,
.divn_shift = 10,
.divn_width = 8,
.divp_shift = 20,
.divp_width = 5,
};
static struct tegra_clk_pll_freq_table pll_cx_freq_table[] = {
{ 12000000, 510000000, 85, 1, 2, 0 },
{ 13000000, 510000000, 78, 1, 2, 0 }, /* actual: 507.0 MHz */
{ 38400000, 510000000, 79, 3, 2, 0 }, /* actual: 505.6 MHz */
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_params pll_c_params = {
.input_min = 12000000,
.input_max = 700000000,
.cf_min = 12000000,
.cf_max = 50000000,
.vco_min = 600000000,
.vco_max = 1200000000,
.base_reg = PLLC_BASE,
.misc_reg = PLLC_MISC0,
.lock_mask = PLL_BASE_LOCK,
.lock_delay = 300,
.iddq_reg = PLLC_MISC1,
.iddq_bit_idx = PLLCX_IDDQ_BIT,
.reset_reg = PLLC_MISC0,
.reset_bit_idx = PLLCX_RESET_BIT,
.max_p = PLL_QLIN_PDIV_MAX,
.ext_misc_reg[0] = PLLC_MISC0,
.ext_misc_reg[1] = PLLC_MISC1,
.ext_misc_reg[2] = PLLC_MISC2,
.ext_misc_reg[3] = PLLC_MISC3,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.mdiv_default = 3,
.div_nmp = &pllc_nmp,
.freq_table = pll_cx_freq_table,
.flags = TEGRA_PLL_USE_LOCK,
.set_defaults = _pllc_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct div_nmp pllcx_nmp = {
.divm_shift = 0,
.divm_width = 8,
.divn_shift = 10,
.divn_width = 8,
.divp_shift = 20,
.divp_width = 5,
};
static struct tegra_clk_pll_params pll_c2_params = {
.input_min = 12000000,
.input_max = 700000000,
.cf_min = 12000000,
.cf_max = 50000000,
.vco_min = 600000000,
.vco_max = 1200000000,
.base_reg = PLLC2_BASE,
.misc_reg = PLLC2_MISC0,
.iddq_reg = PLLC2_MISC1,
.iddq_bit_idx = PLLCX_IDDQ_BIT,
.reset_reg = PLLC2_MISC0,
.reset_bit_idx = PLLCX_RESET_BIT,
.lock_mask = PLLCX_BASE_LOCK,
.lock_delay = 300,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.mdiv_default = 3,
.div_nmp = &pllcx_nmp,
.max_p = PLL_QLIN_PDIV_MAX,
.ext_misc_reg[0] = PLLC2_MISC0,
.ext_misc_reg[1] = PLLC2_MISC1,
.ext_misc_reg[2] = PLLC2_MISC2,
.ext_misc_reg[3] = PLLC2_MISC3,
.freq_table = pll_cx_freq_table,
.flags = TEGRA_PLL_USE_LOCK,
.set_defaults = _pllc2_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct tegra_clk_pll_params pll_c3_params = {
.input_min = 12000000,
.input_max = 700000000,
.cf_min = 12000000,
.cf_max = 50000000,
.vco_min = 600000000,
.vco_max = 1200000000,
.base_reg = PLLC3_BASE,
.misc_reg = PLLC3_MISC0,
.lock_mask = PLLCX_BASE_LOCK,
.lock_delay = 300,
.iddq_reg = PLLC3_MISC1,
.iddq_bit_idx = PLLCX_IDDQ_BIT,
.reset_reg = PLLC3_MISC0,
.reset_bit_idx = PLLCX_RESET_BIT,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.mdiv_default = 3,
.div_nmp = &pllcx_nmp,
.max_p = PLL_QLIN_PDIV_MAX,
.ext_misc_reg[0] = PLLC3_MISC0,
.ext_misc_reg[1] = PLLC3_MISC1,
.ext_misc_reg[2] = PLLC3_MISC2,
.ext_misc_reg[3] = PLLC3_MISC3,
.freq_table = pll_cx_freq_table,
.flags = TEGRA_PLL_USE_LOCK,
.set_defaults = _pllc3_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct div_nmp pllss_nmp = {
.divm_shift = 0,
.divm_width = 8,
.divn_shift = 8,
.divn_width = 8,
.divp_shift = 19,
.divp_width = 5,
};
static struct tegra_clk_pll_freq_table pll_c4_vco_freq_table[] = {
{ 12000000, 600000000, 50, 1, 1, 0 },
{ 13000000, 600000000, 46, 1, 1, 0 }, /* actual: 598.0 MHz */
{ 38400000, 600000000, 62, 4, 1, 0 }, /* actual: 595.2 MHz */
{ 0, 0, 0, 0, 0, 0 },
};
static const struct clk_div_table pll_vco_post_div_table[] = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 3 },
{ .val = 3, .div = 4 },
{ .val = 4, .div = 5 },
{ .val = 5, .div = 6 },
{ .val = 6, .div = 8 },
{ .val = 7, .div = 10 },
{ .val = 8, .div = 12 },
{ .val = 9, .div = 16 },
{ .val = 10, .div = 12 },
{ .val = 11, .div = 16 },
{ .val = 12, .div = 20 },
{ .val = 13, .div = 24 },
{ .val = 14, .div = 32 },
{ .val = 0, .div = 0 },
};
static struct tegra_clk_pll_params pll_c4_vco_params = {
.input_min = 9600000,
.input_max = 800000000,
.cf_min = 9600000,
.cf_max = 19200000,
.vco_min = 500000000,
.vco_max = 1080000000,
.base_reg = PLLC4_BASE,
.misc_reg = PLLC4_MISC0,
.lock_mask = PLL_BASE_LOCK,
.lock_delay = 300,
.max_p = PLL_QLIN_PDIV_MAX,
.ext_misc_reg[0] = PLLC4_MISC0,
.iddq_reg = PLLC4_BASE,
.iddq_bit_idx = PLLSS_IDDQ_BIT,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.mdiv_default = 3,
.div_nmp = &pllss_nmp,
.freq_table = pll_c4_vco_freq_table,
.set_defaults = tegra210_pllc4_set_defaults,
.flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_VCO_OUT,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct tegra_clk_pll_freq_table pll_m_freq_table[] = {
{ 12000000, 800000000, 66, 1, 1, 0 }, /* actual: 792.0 MHz */
{ 13000000, 800000000, 61, 1, 1, 0 }, /* actual: 793.0 MHz */
{ 38400000, 297600000, 93, 4, 3, 0 },
{ 38400000, 400000000, 125, 4, 3, 0 },
{ 38400000, 532800000, 111, 4, 2, 0 },
{ 38400000, 665600000, 104, 3, 2, 0 },
{ 38400000, 800000000, 125, 3, 2, 0 },
{ 38400000, 931200000, 97, 4, 1, 0 },
{ 38400000, 1065600000, 111, 4, 1, 0 },
{ 38400000, 1200000000, 125, 4, 1, 0 },
{ 38400000, 1331200000, 104, 3, 1, 0 },
{ 38400000, 1459200000, 76, 2, 1, 0 },
{ 38400000, 1600000000, 125, 3, 1, 0 },
{ 0, 0, 0, 0, 0, 0 },
};
static struct div_nmp pllm_nmp = {
.divm_shift = 0,
.divm_width = 8,
.override_divm_shift = 0,
.divn_shift = 8,
.divn_width = 8,
.override_divn_shift = 8,
.divp_shift = 20,
.divp_width = 5,
.override_divp_shift = 27,
};
static struct tegra_clk_pll_params pll_m_params = {
.input_min = 9600000,
.input_max = 500000000,
.cf_min = 9600000,
.cf_max = 19200000,
.vco_min = 800000000,
.vco_max = 1866000000,
.base_reg = PLLM_BASE,
.misc_reg = PLLM_MISC2,
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLM_MISC_LOCK_ENABLE,
.lock_delay = 300,
.iddq_reg = PLLM_MISC2,
.iddq_bit_idx = PLLM_IDDQ_BIT,
.max_p = PLL_QLIN_PDIV_MAX,
.ext_misc_reg[0] = PLLM_MISC2,
.ext_misc_reg[1] = PLLM_MISC1,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllm_nmp,
.pmc_divnm_reg = PMC_PLLM_WB0_OVERRIDE,
.pmc_divp_reg = PMC_PLLM_WB0_OVERRIDE_2,
.freq_table = pll_m_freq_table,
.flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct tegra_clk_pll_params pll_mb_params = {
.input_min = 9600000,
.input_max = 500000000,
.cf_min = 9600000,
.cf_max = 19200000,
.vco_min = 800000000,
.vco_max = 1866000000,
.base_reg = PLLMB_BASE,
.misc_reg = PLLMB_MISC1,
.lock_mask = PLL_BASE_LOCK,
.lock_delay = 300,
.iddq_reg = PLLMB_MISC1,
.iddq_bit_idx = PLLMB_IDDQ_BIT,
.max_p = PLL_QLIN_PDIV_MAX,
.ext_misc_reg[0] = PLLMB_MISC1,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllm_nmp,
.freq_table = pll_m_freq_table,
.flags = TEGRA_PLL_USE_LOCK,
.set_defaults = tegra210_pllmb_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct tegra_clk_pll_freq_table pll_e_freq_table[] = {
/* PLLE special case: use cpcon field to store cml divider value */
{ 672000000, 100000000, 125, 42, 0, 13 },
{ 624000000, 100000000, 125, 39, 0, 13 },
{ 336000000, 100000000, 125, 21, 0, 13 },
{ 312000000, 100000000, 200, 26, 0, 14 },
{ 38400000, 100000000, 125, 2, 0, 14 },
{ 12000000, 100000000, 200, 1, 0, 14 },
{ 0, 0, 0, 0, 0, 0 },
};
static struct div_nmp plle_nmp = {
.divm_shift = 0,
.divm_width = 8,
.divn_shift = 8,
.divn_width = 8,
.divp_shift = 24,
.divp_width = 5,
};
static struct tegra_clk_pll_params pll_e_params = {
.input_min = 12000000,
.input_max = 800000000,
.cf_min = 12000000,
.cf_max = 38400000,
.vco_min = 1600000000,
.vco_max = 2500000000U,
.base_reg = PLLE_BASE,
.misc_reg = PLLE_MISC0,
.aux_reg = PLLE_AUX,
.lock_mask = PLLE_MISC_LOCK,
.lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
.lock_delay = 300,
.div_nmp = &plle_nmp,
.freq_table = pll_e_freq_table,
.flags = TEGRA_PLL_FIXED | TEGRA_PLL_LOCK_MISC | TEGRA_PLL_USE_LOCK |
TEGRA_PLL_HAS_LOCK_ENABLE,
.fixed_rate = 100000000,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct tegra_clk_pll_freq_table pll_re_vco_freq_table[] = {
{ 12000000, 672000000, 56, 1, 1, 0 },
{ 13000000, 672000000, 51, 1, 1, 0 }, /* actual: 663.0 MHz */
{ 38400000, 672000000, 70, 4, 1, 0 },
{ 0, 0, 0, 0, 0, 0 },
};
static struct div_nmp pllre_nmp = {
.divm_shift = 0,
.divm_width = 8,
.divn_shift = 8,
.divn_width = 8,
.divp_shift = 16,
.divp_width = 5,
};
static struct tegra_clk_pll_params pll_re_vco_params = {
.input_min = 9600000,
.input_max = 800000000,
.cf_min = 9600000,
.cf_max = 19200000,
.vco_min = 350000000,
.vco_max = 700000000,
.base_reg = PLLRE_BASE,
.misc_reg = PLLRE_MISC0,
.lock_mask = PLLRE_MISC_LOCK,
.lock_delay = 300,
.max_p = PLL_QLIN_PDIV_MAX,
.ext_misc_reg[0] = PLLRE_MISC0,
.iddq_reg = PLLRE_MISC0,
.iddq_bit_idx = PLLRE_IDDQ_BIT,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllre_nmp,
.freq_table = pll_re_vco_freq_table,
.flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_LOCK_MISC | TEGRA_PLL_VCO_OUT,
.set_defaults = tegra210_pllre_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct div_nmp pllp_nmp = {
.divm_shift = 0,
.divm_width = 8,
.divn_shift = 10,
.divn_width = 8,
.divp_shift = 20,
.divp_width = 5,
};
static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
{ 12000000, 408000000, 34, 1, 1, 0 },
{ 38400000, 408000000, 85, 8, 1, 0 }, /* cf = 4.8MHz, allowed exception */
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_params pll_p_params = {
.input_min = 9600000,
.input_max = 800000000,
.cf_min = 9600000,
.cf_max = 19200000,
.vco_min = 350000000,
.vco_max = 700000000,
.base_reg = PLLP_BASE,
.misc_reg = PLLP_MISC0,
.lock_mask = PLL_BASE_LOCK,
.lock_delay = 300,
.iddq_reg = PLLP_MISC0,
.iddq_bit_idx = PLLXP_IDDQ_BIT,
.ext_misc_reg[0] = PLLP_MISC0,
.ext_misc_reg[1] = PLLP_MISC1,
.div_nmp = &pllp_nmp,
.freq_table = pll_p_freq_table,
.fixed_rate = 408000000,
.flags = TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK | TEGRA_PLL_VCO_OUT,
.set_defaults = tegra210_pllp_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct tegra_clk_pll_params pll_a1_params = {
.input_min = 12000000,
.input_max = 700000000,
.cf_min = 12000000,
.cf_max = 50000000,
.vco_min = 600000000,
.vco_max = 1200000000,
.base_reg = PLLA1_BASE,
.misc_reg = PLLA1_MISC0,
.lock_mask = PLLCX_BASE_LOCK,
.lock_delay = 300,
.iddq_reg = PLLA1_MISC1,
.iddq_bit_idx = PLLCX_IDDQ_BIT,
.reset_reg = PLLA1_MISC0,
.reset_bit_idx = PLLCX_RESET_BIT,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllc_nmp,
.ext_misc_reg[0] = PLLA1_MISC0,
.ext_misc_reg[1] = PLLA1_MISC1,
.ext_misc_reg[2] = PLLA1_MISC2,
.ext_misc_reg[3] = PLLA1_MISC3,
.freq_table = pll_cx_freq_table,
.flags = TEGRA_PLL_USE_LOCK,
.set_defaults = _plla1_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct div_nmp plla_nmp = {
.divm_shift = 0,
.divm_width = 8,
.divn_shift = 8,
.divn_width = 8,
.divp_shift = 20,
.divp_width = 5,
};
static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
{ 12000000, 282240000, 47, 1, 2, 1, 0xf148 }, /* actual: 282240234 */
{ 12000000, 368640000, 61, 1, 2, 1, 0xfe15 }, /* actual: 368640381 */
{ 12000000, 240000000, 60, 1, 3, 1, 0 },
{ 13000000, 282240000, 43, 1, 2, 1, 0xfd7d }, /* actual: 282239807 */
{ 13000000, 368640000, 56, 1, 2, 1, 0x06d8 }, /* actual: 368640137 */
{ 13000000, 240000000, 55, 1, 3, 1, 0 }, /* actual: 238.3 MHz */
{ 38400000, 282240000, 44, 3, 2, 1, 0xf333 }, /* actual: 282239844 */
{ 38400000, 368640000, 57, 3, 2, 1, 0x0333 }, /* actual: 368639844 */
{ 38400000, 240000000, 75, 3, 3, 1, 0 },
{ 0, 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_params pll_a_params = {
.input_min = 12000000,
.input_max = 800000000,
.cf_min = 12000000,
.cf_max = 19200000,
.vco_min = 500000000,
.vco_max = 1000000000,
.base_reg = PLLA_BASE,
.misc_reg = PLLA_MISC0,
.lock_mask = PLL_BASE_LOCK,
.lock_delay = 300,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.iddq_reg = PLLA_BASE,
.iddq_bit_idx = PLLA_IDDQ_BIT,
.div_nmp = &plla_nmp,
.sdm_din_reg = PLLA_MISC1,
.sdm_din_mask = PLLA_SDM_DIN_MASK,
.sdm_ctrl_reg = PLLA_MISC2,
.sdm_ctrl_en_mask = PLLA_SDM_EN_MASK,
.ext_misc_reg[0] = PLLA_MISC0,
.ext_misc_reg[1] = PLLA_MISC1,
.ext_misc_reg[2] = PLLA_MISC2,
.freq_table = pll_a_freq_table,
.flags = TEGRA_PLL_USE_LOCK | TEGRA_MDIV_NEW,
.set_defaults = tegra210_plla_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
.set_gain = tegra210_clk_pll_set_gain,
.adjust_vco = tegra210_clk_adjust_vco_min,
};
static struct div_nmp plld_nmp = {
.divm_shift = 0,
.divm_width = 8,
.divn_shift = 11,
.divn_width = 8,
.divp_shift = 20,
.divp_width = 3,
};
static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
{ 12000000, 594000000, 99, 1, 2, 0, 0 },
{ 13000000, 594000000, 91, 1, 2, 0, 0xfc4f }, /* actual: 594000183 */
{ 38400000, 594000000, 30, 1, 2, 0, 0x0e00 },
{ 0, 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_params pll_d_params = {
.input_min = 12000000,
.input_max = 800000000,
.cf_min = 12000000,
.cf_max = 38400000,
.vco_min = 750000000,
.vco_max = 1500000000,
.base_reg = PLLD_BASE,
.misc_reg = PLLD_MISC0,
.lock_mask = PLL_BASE_LOCK,
.lock_delay = 1000,
.iddq_reg = PLLD_MISC0,
.iddq_bit_idx = PLLD_IDDQ_BIT,
.round_p_to_pdiv = pll_expo_p_to_pdiv,
.pdiv_tohw = pll_expo_pdiv_to_hw,
.div_nmp = &plld_nmp,
.sdm_din_reg = PLLD_MISC0,
.sdm_din_mask = PLLA_SDM_DIN_MASK,
.sdm_ctrl_reg = PLLD_MISC0,
.sdm_ctrl_en_mask = PLLD_SDM_EN_MASK,
.ext_misc_reg[0] = PLLD_MISC0,
.ext_misc_reg[1] = PLLD_MISC1,
.freq_table = pll_d_freq_table,
.flags = TEGRA_PLL_USE_LOCK,
.mdiv_default = 1,
.set_defaults = tegra210_plld_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
.set_gain = tegra210_clk_pll_set_gain,
.adjust_vco = tegra210_clk_adjust_vco_min,
};
static struct tegra_clk_pll_freq_table tegra210_pll_d2_freq_table[] = {
{ 12000000, 594000000, 99, 1, 2, 0, 0xf000 },
{ 13000000, 594000000, 91, 1, 2, 0, 0xfc4f }, /* actual: 594000183 */
{ 38400000, 594000000, 30, 1, 2, 0, 0x0e00 },
{ 0, 0, 0, 0, 0, 0, 0 },
};
/* s/w policy, always tegra_pll_ref */
static struct tegra_clk_pll_params pll_d2_params = {
.input_min = 12000000,
.input_max = 800000000,
.cf_min = 12000000,
.cf_max = 38400000,
.vco_min = 750000000,
.vco_max = 1500000000,
.base_reg = PLLD2_BASE,
.misc_reg = PLLD2_MISC0,
.lock_mask = PLL_BASE_LOCK,
.lock_delay = 300,
.iddq_reg = PLLD2_BASE,
.iddq_bit_idx = PLLSS_IDDQ_BIT,
.sdm_din_reg = PLLD2_MISC3,
.sdm_din_mask = PLLA_SDM_DIN_MASK,
.sdm_ctrl_reg = PLLD2_MISC1,
.sdm_ctrl_en_mask = PLLD2_SDM_EN_MASK,
/* disable spread-spectrum for pll_d2 */
.ssc_ctrl_reg = 0,
.ssc_ctrl_en_mask = 0,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllss_nmp,
.ext_misc_reg[0] = PLLD2_MISC0,
.ext_misc_reg[1] = PLLD2_MISC1,
.ext_misc_reg[2] = PLLD2_MISC2,
.ext_misc_reg[3] = PLLD2_MISC3,
.max_p = PLL_QLIN_PDIV_MAX,
.mdiv_default = 1,
.freq_table = tegra210_pll_d2_freq_table,
.set_defaults = tegra210_plld2_set_defaults,
.flags = TEGRA_PLL_USE_LOCK,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
.set_gain = tegra210_clk_pll_set_gain,
.adjust_vco = tegra210_clk_adjust_vco_min,
};
static struct tegra_clk_pll_freq_table pll_dp_freq_table[] = {
{ 12000000, 270000000, 90, 1, 4, 0, 0xf000 },
{ 13000000, 270000000, 83, 1, 4, 0, 0xf000 }, /* actual: 269.8 MHz */
{ 38400000, 270000000, 28, 1, 4, 0, 0xf400 },
{ 0, 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_params pll_dp_params = {
.input_min = 12000000,
.input_max = 800000000,
.cf_min = 12000000,
.cf_max = 38400000,
.vco_min = 750000000,
.vco_max = 1500000000,
.base_reg = PLLDP_BASE,
.misc_reg = PLLDP_MISC,
.lock_mask = PLL_BASE_LOCK,
.lock_delay = 300,
.iddq_reg = PLLDP_BASE,
.iddq_bit_idx = PLLSS_IDDQ_BIT,
.sdm_din_reg = PLLDP_SS_CTRL2,
.sdm_din_mask = PLLA_SDM_DIN_MASK,
.sdm_ctrl_reg = PLLDP_SS_CFG,
.sdm_ctrl_en_mask = PLLDP_SDM_EN_MASK,
.ssc_ctrl_reg = PLLDP_SS_CFG,
.ssc_ctrl_en_mask = PLLDP_SSC_EN_MASK,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllss_nmp,
.ext_misc_reg[0] = PLLDP_MISC,
.ext_misc_reg[1] = PLLDP_SS_CFG,
.ext_misc_reg[2] = PLLDP_SS_CTRL1,
.ext_misc_reg[3] = PLLDP_SS_CTRL2,
.max_p = PLL_QLIN_PDIV_MAX,
.mdiv_default = 1,
.freq_table = pll_dp_freq_table,
.set_defaults = tegra210_plldp_set_defaults,
.flags = TEGRA_PLL_USE_LOCK,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
.set_gain = tegra210_clk_pll_set_gain,
.adjust_vco = tegra210_clk_adjust_vco_min,
};
static struct div_nmp pllu_nmp = {
.divm_shift = 0,
.divm_width = 8,
.divn_shift = 8,
.divn_width = 8,
.divp_shift = 16,
.divp_width = 5,
};
static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
{ 12000000, 480000000, 40, 1, 1, 0 },
{ 13000000, 480000000, 36, 1, 1, 0 }, /* actual: 468.0 MHz */
{ 38400000, 480000000, 25, 2, 1, 0 },
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_params pll_u_vco_params = {
.input_min = 9600000,
.input_max = 800000000,
.cf_min = 9600000,
.cf_max = 19200000,
.vco_min = 350000000,
.vco_max = 700000000,
.base_reg = PLLU_BASE,
.misc_reg = PLLU_MISC0,
.lock_mask = PLL_BASE_LOCK,
.lock_delay = 1000,
.iddq_reg = PLLU_MISC0,
.iddq_bit_idx = PLLU_IDDQ_BIT,
.ext_misc_reg[0] = PLLU_MISC0,
.ext_misc_reg[1] = PLLU_MISC1,
.round_p_to_pdiv = pll_qlin_p_to_pdiv,
.pdiv_tohw = pll_qlin_pdiv_to_hw,
.div_nmp = &pllu_nmp,
.freq_table = pll_u_freq_table,
.flags = TEGRA_PLLU | TEGRA_PLL_USE_LOCK | TEGRA_PLL_VCO_OUT,
.set_defaults = tegra210_pllu_set_defaults,
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
[tegra_clk_ispb] = { .dt_id = TEGRA210_CLK_ISPB, .present = true },
[tegra_clk_rtc] = { .dt_id = TEGRA210_CLK_RTC, .present = true },
[tegra_clk_timer] = { .dt_id = TEGRA210_CLK_TIMER, .present = true },
[tegra_clk_uarta_8] = { .dt_id = TEGRA210_CLK_UARTA, .present = true },
[tegra_clk_sdmmc2_9] = { .dt_id = TEGRA210_CLK_SDMMC2, .present = true },
[tegra_clk_i2s1] = { .dt_id = TEGRA210_CLK_I2S1, .present = true },
[tegra_clk_i2c1] = { .dt_id = TEGRA210_CLK_I2C1, .present = true },
[tegra_clk_sdmmc1_9] = { .dt_id = TEGRA210_CLK_SDMMC1, .present = true },
[tegra_clk_sdmmc4_9] = { .dt_id = TEGRA210_CLK_SDMMC4, .present = true },
[tegra_clk_pwm] = { .dt_id = TEGRA210_CLK_PWM, .present = true },
[tegra_clk_i2s2] = { .dt_id = TEGRA210_CLK_I2S2, .present = true },
[tegra_clk_usbd] = { .dt_id = TEGRA210_CLK_USBD, .present = true },
[tegra_clk_isp_9] = { .dt_id = TEGRA210_CLK_ISP, .present = true },
[tegra_clk_disp2_8] = { .dt_id = TEGRA210_CLK_DISP2, .present = true },
[tegra_clk_disp1_8] = { .dt_id = TEGRA210_CLK_DISP1, .present = true },
[tegra_clk_host1x_9] = { .dt_id = TEGRA210_CLK_HOST1X, .present = true },
[tegra_clk_i2s0] = { .dt_id = TEGRA210_CLK_I2S0, .present = true },
[tegra_clk_apbdma] = { .dt_id = TEGRA210_CLK_APBDMA, .present = true },
[tegra_clk_kfuse] = { .dt_id = TEGRA210_CLK_KFUSE, .present = true },
[tegra_clk_sbc1_9] = { .dt_id = TEGRA210_CLK_SBC1, .present = true },
[tegra_clk_sbc2_9] = { .dt_id = TEGRA210_CLK_SBC2, .present = true },
[tegra_clk_sbc3_9] = { .dt_id = TEGRA210_CLK_SBC3, .present = true },
[tegra_clk_i2c5] = { .dt_id = TEGRA210_CLK_I2C5, .present = true },
[tegra_clk_csi] = { .dt_id = TEGRA210_CLK_CSI, .present = true },
[tegra_clk_i2c2] = { .dt_id = TEGRA210_CLK_I2C2, .present = true },
[tegra_clk_uartc_8] = { .dt_id = TEGRA210_CLK_UARTC, .present = true },
[tegra_clk_mipi_cal] = { .dt_id = TEGRA210_CLK_MIPI_CAL, .present = true },
[tegra_clk_emc] = { .dt_id = TEGRA210_CLK_EMC, .present = true },
[tegra_clk_usb2] = { .dt_id = TEGRA210_CLK_USB2, .present = true },
[tegra_clk_bsev] = { .dt_id = TEGRA210_CLK_BSEV, .present = true },
[tegra_clk_uartd_8] = { .dt_id = TEGRA210_CLK_UARTD, .present = true },
[tegra_clk_i2c3] = { .dt_id = TEGRA210_CLK_I2C3, .present = true },
[tegra_clk_sbc4_9] = { .dt_id = TEGRA210_CLK_SBC4, .present = true },
[tegra_clk_sdmmc3_9] = { .dt_id = TEGRA210_CLK_SDMMC3, .present = true },
[tegra_clk_pcie] = { .dt_id = TEGRA210_CLK_PCIE, .present = true },
[tegra_clk_owr_8] = { .dt_id = TEGRA210_CLK_OWR, .present = true },
[tegra_clk_afi] = { .dt_id = TEGRA210_CLK_AFI, .present = true },
[tegra_clk_csite_8] = { .dt_id = TEGRA210_CLK_CSITE, .present = true },
[tegra_clk_soc_therm_8] = { .dt_id = TEGRA210_CLK_SOC_THERM, .present = true },
[tegra_clk_dtv] = { .dt_id = TEGRA210_CLK_DTV, .present = true },
[tegra_clk_i2cslow] = { .dt_id = TEGRA210_CLK_I2CSLOW, .present = true },
[tegra_clk_tsec_8] = { .dt_id = TEGRA210_CLK_TSEC, .present = true },
[tegra_clk_xusb_host] = { .dt_id = TEGRA210_CLK_XUSB_HOST, .present = true },
[tegra_clk_csus] = { .dt_id = TEGRA210_CLK_CSUS, .present = true },
[tegra_clk_mselect] = { .dt_id = TEGRA210_CLK_MSELECT, .present = true },
[tegra_clk_tsensor] = { .dt_id = TEGRA210_CLK_TSENSOR, .present = true },
[tegra_clk_i2s3] = { .dt_id = TEGRA210_CLK_I2S3, .present = true },
[tegra_clk_i2s4] = { .dt_id = TEGRA210_CLK_I2S4, .present = true },
[tegra_clk_i2c4] = { .dt_id = TEGRA210_CLK_I2C4, .present = true },
[tegra_clk_d_audio] = { .dt_id = TEGRA210_CLK_D_AUDIO, .present = true },
[tegra_clk_hda2codec_2x_8] = { .dt_id = TEGRA210_CLK_HDA2CODEC_2X, .present = true },
[tegra_clk_spdif_2x] = { .dt_id = TEGRA210_CLK_SPDIF_2X, .present = true },
[tegra_clk_actmon] = { .dt_id = TEGRA210_CLK_ACTMON, .present = true },
[tegra_clk_extern1] = { .dt_id = TEGRA210_CLK_EXTERN1, .present = true },
[tegra_clk_extern2] = { .dt_id = TEGRA210_CLK_EXTERN2, .present = true },
[tegra_clk_extern3] = { .dt_id = TEGRA210_CLK_EXTERN3, .present = true },
[tegra_clk_sata_oob_8] = { .dt_id = TEGRA210_CLK_SATA_OOB, .present = true },
[tegra_clk_sata_8] = { .dt_id = TEGRA210_CLK_SATA, .present = true },
[tegra_clk_hda_8] = { .dt_id = TEGRA210_CLK_HDA, .present = true },
[tegra_clk_hda2hdmi] = { .dt_id = TEGRA210_CLK_HDA2HDMI, .present = true },
[tegra_clk_cilab] = { .dt_id = TEGRA210_CLK_CILAB, .present = true },
[tegra_clk_cilcd] = { .dt_id = TEGRA210_CLK_CILCD, .present = true },
[tegra_clk_cile] = { .dt_id = TEGRA210_CLK_CILE, .present = true },
[tegra_clk_dsialp] = { .dt_id = TEGRA210_CLK_DSIALP, .present = true },
[tegra_clk_dsiblp] = { .dt_id = TEGRA210_CLK_DSIBLP, .present = true },
[tegra_clk_entropy_8] = { .dt_id = TEGRA210_CLK_ENTROPY, .present = true },
[tegra_clk_xusb_ss] = { .dt_id = TEGRA210_CLK_XUSB_SS, .present = true },
[tegra_clk_i2c6] = { .dt_id = TEGRA210_CLK_I2C6, .present = true },
[tegra_clk_vim2_clk] = { .dt_id = TEGRA210_CLK_VIM2_CLK, .present = true },
[tegra_clk_clk72Mhz_8] = { .dt_id = TEGRA210_CLK_CLK72MHZ, .present = true },
[tegra_clk_vic03_8] = { .dt_id = TEGRA210_CLK_VIC03, .present = true },
[tegra_clk_dpaux] = { .dt_id = TEGRA210_CLK_DPAUX, .present = true },
[tegra_clk_dpaux1] = { .dt_id = TEGRA210_CLK_DPAUX1, .present = true },
[tegra_clk_sor0] = { .dt_id = TEGRA210_CLK_SOR0, .present = true },
[tegra_clk_sor0_lvds] = { .dt_id = TEGRA210_CLK_SOR0_LVDS, .present = true },
[tegra_clk_sor1] = { .dt_id = TEGRA210_CLK_SOR1, .present = true },
[tegra_clk_sor1_src] = { .dt_id = TEGRA210_CLK_SOR1_SRC, .present = true },
[tegra_clk_gpu] = { .dt_id = TEGRA210_CLK_GPU, .present = true },
[tegra_clk_pll_g_ref] = { .dt_id = TEGRA210_CLK_PLL_G_REF, .present = true, },
[tegra_clk_uartb_8] = { .dt_id = TEGRA210_CLK_UARTB, .present = true },
[tegra_clk_vfir] = { .dt_id = TEGRA210_CLK_VFIR, .present = true },
[tegra_clk_spdif_in_8] = { .dt_id = TEGRA210_CLK_SPDIF_IN, .present = true },
[tegra_clk_spdif_out] = { .dt_id = TEGRA210_CLK_SPDIF_OUT, .present = true },
[tegra_clk_vi_10] = { .dt_id = TEGRA210_CLK_VI, .present = true },
[tegra_clk_vi_sensor_8] = { .dt_id = TEGRA210_CLK_VI_SENSOR, .present = true },
[tegra_clk_fuse] = { .dt_id = TEGRA210_CLK_FUSE, .present = true },
[tegra_clk_fuse_burn] = { .dt_id = TEGRA210_CLK_FUSE_BURN, .present = true },
[tegra_clk_clk_32k] = { .dt_id = TEGRA210_CLK_CLK_32K, .present = true },
[tegra_clk_clk_m] = { .dt_id = TEGRA210_CLK_CLK_M, .present = true },
[tegra_clk_clk_m_div2] = { .dt_id = TEGRA210_CLK_CLK_M_DIV2, .present = true },
[tegra_clk_clk_m_div4] = { .dt_id = TEGRA210_CLK_CLK_M_DIV4, .present = true },
[tegra_clk_pll_ref] = { .dt_id = TEGRA210_CLK_PLL_REF, .present = true },
[tegra_clk_pll_c] = { .dt_id = TEGRA210_CLK_PLL_C, .present = true },
[tegra_clk_pll_c_out1] = { .dt_id = TEGRA210_CLK_PLL_C_OUT1, .present = true },
[tegra_clk_pll_c2] = { .dt_id = TEGRA210_CLK_PLL_C2, .present = true },
[tegra_clk_pll_c3] = { .dt_id = TEGRA210_CLK_PLL_C3, .present = true },
[tegra_clk_pll_m] = { .dt_id = TEGRA210_CLK_PLL_M, .present = true },
[tegra_clk_pll_m_out1] = { .dt_id = TEGRA210_CLK_PLL_M_OUT1, .present = true },
[tegra_clk_pll_p] = { .dt_id = TEGRA210_CLK_PLL_P, .present = true },
[tegra_clk_pll_p_out1] = { .dt_id = TEGRA210_CLK_PLL_P_OUT1, .present = true },
[tegra_clk_pll_p_out3] = { .dt_id = TEGRA210_CLK_PLL_P_OUT3, .present = true },
[tegra_clk_pll_p_out4_cpu] = { .dt_id = TEGRA210_CLK_PLL_P_OUT4, .present = true },
[tegra_clk_pll_p_out_hsio] = { .dt_id = TEGRA210_CLK_PLL_P_OUT_HSIO, .present = true },
[tegra_clk_pll_p_out_xusb] = { .dt_id = TEGRA210_CLK_PLL_P_OUT_XUSB, .present = true },
[tegra_clk_pll_p_out_cpu] = { .dt_id = TEGRA210_CLK_PLL_P_OUT_CPU, .present = true },
[tegra_clk_pll_p_out_adsp] = { .dt_id = TEGRA210_CLK_PLL_P_OUT_ADSP, .present = true },
[tegra_clk_pll_a] = { .dt_id = TEGRA210_CLK_PLL_A, .present = true },
[tegra_clk_pll_a_out0] = { .dt_id = TEGRA210_CLK_PLL_A_OUT0, .present = true },
[tegra_clk_pll_d] = { .dt_id = TEGRA210_CLK_PLL_D, .present = true },
[tegra_clk_pll_d_out0] = { .dt_id = TEGRA210_CLK_PLL_D_OUT0, .present = true },
[tegra_clk_pll_d2] = { .dt_id = TEGRA210_CLK_PLL_D2, .present = true },
[tegra_clk_pll_d2_out0] = { .dt_id = TEGRA210_CLK_PLL_D2_OUT0, .present = true },
[tegra_clk_pll_u] = { .dt_id = TEGRA210_CLK_PLL_U, .present = true },
[tegra_clk_pll_u_out] = { .dt_id = TEGRA210_CLK_PLL_U_OUT, .present = true },
[tegra_clk_pll_u_out1] = { .dt_id = TEGRA210_CLK_PLL_U_OUT1, .present = true },
[tegra_clk_pll_u_out2] = { .dt_id = TEGRA210_CLK_PLL_U_OUT2, .present = true },
[tegra_clk_pll_u_480m] = { .dt_id = TEGRA210_CLK_PLL_U_480M, .present = true },
[tegra_clk_pll_u_60m] = { .dt_id = TEGRA210_CLK_PLL_U_60M, .present = true },
[tegra_clk_pll_u_48m] = { .dt_id = TEGRA210_CLK_PLL_U_48M, .present = true },
[tegra_clk_pll_x] = { .dt_id = TEGRA210_CLK_PLL_X, .present = true },
[tegra_clk_pll_x_out0] = { .dt_id = TEGRA210_CLK_PLL_X_OUT0, .present = true },
[tegra_clk_pll_re_vco] = { .dt_id = TEGRA210_CLK_PLL_RE_VCO, .present = true },
[tegra_clk_pll_re_out] = { .dt_id = TEGRA210_CLK_PLL_RE_OUT, .present = true },
[tegra_clk_spdif_in_sync] = { .dt_id = TEGRA210_CLK_SPDIF_IN_SYNC, .present = true },
[tegra_clk_i2s0_sync] = { .dt_id = TEGRA210_CLK_I2S0_SYNC, .present = true },
[tegra_clk_i2s1_sync] = { .dt_id = TEGRA210_CLK_I2S1_SYNC, .present = true },
[tegra_clk_i2s2_sync] = { .dt_id = TEGRA210_CLK_I2S2_SYNC, .present = true },
[tegra_clk_i2s3_sync] = { .dt_id = TEGRA210_CLK_I2S3_SYNC, .present = true },
[tegra_clk_i2s4_sync] = { .dt_id = TEGRA210_CLK_I2S4_SYNC, .present = true },
[tegra_clk_vimclk_sync] = { .dt_id = TEGRA210_CLK_VIMCLK_SYNC, .present = true },
[tegra_clk_audio0] = { .dt_id = TEGRA210_CLK_AUDIO0, .present = true },
[tegra_clk_audio1] = { .dt_id = TEGRA210_CLK_AUDIO1, .present = true },
[tegra_clk_audio2] = { .dt_id = TEGRA210_CLK_AUDIO2, .present = true },
[tegra_clk_audio3] = { .dt_id = TEGRA210_CLK_AUDIO3, .present = true },
[tegra_clk_audio4] = { .dt_id = TEGRA210_CLK_AUDIO4, .present = true },
[tegra_clk_spdif] = { .dt_id = TEGRA210_CLK_SPDIF, .present = true },
[tegra_clk_clk_out_1] = { .dt_id = TEGRA210_CLK_CLK_OUT_1, .present = true },
[tegra_clk_clk_out_2] = { .dt_id = TEGRA210_CLK_CLK_OUT_2, .present = true },
[tegra_clk_clk_out_3] = { .dt_id = TEGRA210_CLK_CLK_OUT_3, .present = true },
[tegra_clk_blink] = { .dt_id = TEGRA210_CLK_BLINK, .present = true },
[tegra_clk_xusb_gate] = { .dt_id = TEGRA210_CLK_XUSB_GATE, .present = true },
[tegra_clk_xusb_host_src_8] = { .dt_id = TEGRA210_CLK_XUSB_HOST_SRC, .present = true },
[tegra_clk_xusb_falcon_src_8] = { .dt_id = TEGRA210_CLK_XUSB_FALCON_SRC, .present = true },
[tegra_clk_xusb_fs_src] = { .dt_id = TEGRA210_CLK_XUSB_FS_SRC, .present = true },
[tegra_clk_xusb_ss_src_8] = { .dt_id = TEGRA210_CLK_XUSB_SS_SRC, .present = true },
[tegra_clk_xusb_ss_div2] = { .dt_id = TEGRA210_CLK_XUSB_SS_DIV2, .present = true },
[tegra_clk_xusb_dev_src_8] = { .dt_id = TEGRA210_CLK_XUSB_DEV_SRC, .present = true },
[tegra_clk_xusb_dev] = { .dt_id = TEGRA210_CLK_XUSB_DEV, .present = true },
[tegra_clk_xusb_hs_src_4] = { .dt_id = TEGRA210_CLK_XUSB_HS_SRC, .present = true },
[tegra_clk_xusb_ssp_src] = { .dt_id = TEGRA210_CLK_XUSB_SSP_SRC, .present = true },
[tegra_clk_usb2_hsic_trk] = { .dt_id = TEGRA210_CLK_USB2_HSIC_TRK, .present = true },
[tegra_clk_hsic_trk] = { .dt_id = TEGRA210_CLK_HSIC_TRK, .present = true },
[tegra_clk_usb2_trk] = { .dt_id = TEGRA210_CLK_USB2_TRK, .present = true },
[tegra_clk_sclk] = { .dt_id = TEGRA210_CLK_SCLK, .present = true },
[tegra_clk_sclk_mux] = { .dt_id = TEGRA210_CLK_SCLK_MUX, .present = true },
[tegra_clk_hclk] = { .dt_id = TEGRA210_CLK_HCLK, .present = true },
[tegra_clk_pclk] = { .dt_id = TEGRA210_CLK_PCLK, .present = true },
[tegra_clk_cclk_g] = { .dt_id = TEGRA210_CLK_CCLK_G, .present = true },
[tegra_clk_cclk_lp] = { .dt_id = TEGRA210_CLK_CCLK_LP, .present = true },
[tegra_clk_dfll_ref] = { .dt_id = TEGRA210_CLK_DFLL_REF, .present = true },
[tegra_clk_dfll_soc] = { .dt_id = TEGRA210_CLK_DFLL_SOC, .present = true },
[tegra_clk_vi_sensor2_8] = { .dt_id = TEGRA210_CLK_VI_SENSOR2, .present = true },
[tegra_clk_pll_p_out5] = { .dt_id = TEGRA210_CLK_PLL_P_OUT5, .present = true },
[tegra_clk_pll_c4] = { .dt_id = TEGRA210_CLK_PLL_C4, .present = true },
[tegra_clk_pll_dp] = { .dt_id = TEGRA210_CLK_PLL_DP, .present = true },
[tegra_clk_audio0_mux] = { .dt_id = TEGRA210_CLK_AUDIO0_MUX, .present = true },
[tegra_clk_audio1_mux] = { .dt_id = TEGRA210_CLK_AUDIO1_MUX, .present = true },
[tegra_clk_audio2_mux] = { .dt_id = TEGRA210_CLK_AUDIO2_MUX, .present = true },
[tegra_clk_audio3_mux] = { .dt_id = TEGRA210_CLK_AUDIO3_MUX, .present = true },
[tegra_clk_audio4_mux] = { .dt_id = TEGRA210_CLK_AUDIO4_MUX, .present = true },
[tegra_clk_spdif_mux] = { .dt_id = TEGRA210_CLK_SPDIF_MUX, .present = true },
[tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_1_MUX, .present = true },
[tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_2_MUX, .present = true },
[tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_3_MUX, .present = true },
[tegra_clk_maud] = { .dt_id = TEGRA210_CLK_MAUD, .present = true },
[tegra_clk_mipibif] = { .dt_id = TEGRA210_CLK_MIPIBIF, .present = true },
[tegra_clk_qspi] = { .dt_id = TEGRA210_CLK_QSPI, .present = true },
[tegra_clk_sdmmc_legacy] = { .dt_id = TEGRA210_CLK_SDMMC_LEGACY, .present = true },
[tegra_clk_tsecb] = { .dt_id = TEGRA210_CLK_TSECB, .present = true },
[tegra_clk_uartape] = { .dt_id = TEGRA210_CLK_UARTAPE, .present = true },
[tegra_clk_vi_i2c] = { .dt_id = TEGRA210_CLK_VI_I2C, .present = true },
[tegra_clk_ape] = { .dt_id = TEGRA210_CLK_APE, .present = true },
[tegra_clk_dbgapb] = { .dt_id = TEGRA210_CLK_DBGAPB, .present = true },
[tegra_clk_nvdec] = { .dt_id = TEGRA210_CLK_NVDEC, .present = true },
[tegra_clk_nvenc] = { .dt_id = TEGRA210_CLK_NVENC, .present = true },
[tegra_clk_nvjpg] = { .dt_id = TEGRA210_CLK_NVJPG, .present = true },
[tegra_clk_pll_c4_out0] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT0, .present = true },
[tegra_clk_pll_c4_out1] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT1, .present = true },
[tegra_clk_pll_c4_out2] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT2, .present = true },
[tegra_clk_pll_c4_out3] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT3, .present = true },
[tegra_clk_apb2ape] = { .dt_id = TEGRA210_CLK_APB2APE, .present = true },
[tegra_clk_pll_a1] = { .dt_id = TEGRA210_CLK_PLL_A1, .present = true },
};
static struct tegra_devclk devclks[] __initdata = {
{ .con_id = "clk_m", .dt_id = TEGRA210_CLK_CLK_M },
{ .con_id = "pll_ref", .dt_id = TEGRA210_CLK_PLL_REF },
{ .con_id = "clk_32k", .dt_id = TEGRA210_CLK_CLK_32K },
{ .con_id = "clk_m_div2", .dt_id = TEGRA210_CLK_CLK_M_DIV2 },
{ .con_id = "clk_m_div4", .dt_id = TEGRA210_CLK_CLK_M_DIV4 },
{ .con_id = "pll_c", .dt_id = TEGRA210_CLK_PLL_C },
{ .con_id = "pll_c_out1", .dt_id = TEGRA210_CLK_PLL_C_OUT1 },
{ .con_id = "pll_c2", .dt_id = TEGRA210_CLK_PLL_C2 },
{ .con_id = "pll_c3", .dt_id = TEGRA210_CLK_PLL_C3 },
{ .con_id = "pll_p", .dt_id = TEGRA210_CLK_PLL_P },
{ .con_id = "pll_p_out1", .dt_id = TEGRA210_CLK_PLL_P_OUT1 },
{ .con_id = "pll_p_out2", .dt_id = TEGRA210_CLK_PLL_P_OUT2 },
{ .con_id = "pll_p_out3", .dt_id = TEGRA210_CLK_PLL_P_OUT3 },
{ .con_id = "pll_p_out4", .dt_id = TEGRA210_CLK_PLL_P_OUT4 },
{ .con_id = "pll_m", .dt_id = TEGRA210_CLK_PLL_M },
{ .con_id = "pll_m_out1", .dt_id = TEGRA210_CLK_PLL_M_OUT1 },
{ .con_id = "pll_x", .dt_id = TEGRA210_CLK_PLL_X },
{ .con_id = "pll_x_out0", .dt_id = TEGRA210_CLK_PLL_X_OUT0 },
{ .con_id = "pll_u", .dt_id = TEGRA210_CLK_PLL_U },
{ .con_id = "pll_u_out", .dt_id = TEGRA210_CLK_PLL_U_OUT },
{ .con_id = "pll_u_out1", .dt_id = TEGRA210_CLK_PLL_U_OUT1 },
{ .con_id = "pll_u_out2", .dt_id = TEGRA210_CLK_PLL_U_OUT2 },
{ .con_id = "pll_u_480M", .dt_id = TEGRA210_CLK_PLL_U_480M },
{ .con_id = "pll_u_60M", .dt_id = TEGRA210_CLK_PLL_U_60M },
{ .con_id = "pll_u_48M", .dt_id = TEGRA210_CLK_PLL_U_48M },
{ .con_id = "pll_d", .dt_id = TEGRA210_CLK_PLL_D },
{ .con_id = "pll_d_out0", .dt_id = TEGRA210_CLK_PLL_D_OUT0 },
{ .con_id = "pll_d2", .dt_id = TEGRA210_CLK_PLL_D2 },
{ .con_id = "pll_d2_out0", .dt_id = TEGRA210_CLK_PLL_D2_OUT0 },
{ .con_id = "pll_a", .dt_id = TEGRA210_CLK_PLL_A },
{ .con_id = "pll_a_out0", .dt_id = TEGRA210_CLK_PLL_A_OUT0 },
{ .con_id = "pll_re_vco", .dt_id = TEGRA210_CLK_PLL_RE_VCO },
{ .con_id = "pll_re_out", .dt_id = TEGRA210_CLK_PLL_RE_OUT },
{ .con_id = "spdif_in_sync", .dt_id = TEGRA210_CLK_SPDIF_IN_SYNC },
{ .con_id = "i2s0_sync", .dt_id = TEGRA210_CLK_I2S0_SYNC },
{ .con_id = "i2s1_sync", .dt_id = TEGRA210_CLK_I2S1_SYNC },
{ .con_id = "i2s2_sync", .dt_id = TEGRA210_CLK_I2S2_SYNC },
{ .con_id = "i2s3_sync", .dt_id = TEGRA210_CLK_I2S3_SYNC },
{ .con_id = "i2s4_sync", .dt_id = TEGRA210_CLK_I2S4_SYNC },
{ .con_id = "vimclk_sync", .dt_id = TEGRA210_CLK_VIMCLK_SYNC },
{ .con_id = "audio0", .dt_id = TEGRA210_CLK_AUDIO0 },
{ .con_id = "audio1", .dt_id = TEGRA210_CLK_AUDIO1 },
{ .con_id = "audio2", .dt_id = TEGRA210_CLK_AUDIO2 },
{ .con_id = "audio3", .dt_id = TEGRA210_CLK_AUDIO3 },
{ .con_id = "audio4", .dt_id = TEGRA210_CLK_AUDIO4 },
{ .con_id = "spdif", .dt_id = TEGRA210_CLK_SPDIF },
{ .con_id = "spdif_2x", .dt_id = TEGRA210_CLK_SPDIF_2X },
{ .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA210_CLK_EXTERN1 },
{ .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA210_CLK_EXTERN2 },
{ .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA210_CLK_EXTERN3 },
{ .con_id = "blink", .dt_id = TEGRA210_CLK_BLINK },
{ .con_id = "cclk_g", .dt_id = TEGRA210_CLK_CCLK_G },
{ .con_id = "cclk_lp", .dt_id = TEGRA210_CLK_CCLK_LP },
{ .con_id = "sclk", .dt_id = TEGRA210_CLK_SCLK },
{ .con_id = "hclk", .dt_id = TEGRA210_CLK_HCLK },
{ .con_id = "pclk", .dt_id = TEGRA210_CLK_PCLK },
{ .con_id = "fuse", .dt_id = TEGRA210_CLK_FUSE },
{ .dev_id = "rtc-tegra", .dt_id = TEGRA210_CLK_RTC },
{ .dev_id = "timer", .dt_id = TEGRA210_CLK_TIMER },
{ .con_id = "pll_c4_out0", .dt_id = TEGRA210_CLK_PLL_C4_OUT0 },
{ .con_id = "pll_c4_out1", .dt_id = TEGRA210_CLK_PLL_C4_OUT1 },
{ .con_id = "pll_c4_out2", .dt_id = TEGRA210_CLK_PLL_C4_OUT2 },
{ .con_id = "pll_c4_out3", .dt_id = TEGRA210_CLK_PLL_C4_OUT3 },
{ .con_id = "dpaux", .dt_id = TEGRA210_CLK_DPAUX },
{ .con_id = "sor0", .dt_id = TEGRA210_CLK_SOR0 },
};
static struct tegra_audio_clk_info tegra210_audio_plls[] = {
{ "pll_a", &pll_a_params, tegra_clk_pll_a, "pll_ref" },
{ "pll_a1", &pll_a1_params, tegra_clk_pll_a1, "pll_ref" },
};
static struct clk **clks;
static __init void tegra210_periph_clk_init(void __iomem *clk_base,
void __iomem *pmc_base)
{
struct clk *clk;
/* xusb_ss_div2 */
clk = clk_register_fixed_factor(NULL, "xusb_ss_div2", "xusb_ss_src", 0,
1, 2);
clks[TEGRA210_CLK_XUSB_SS_DIV2] = clk;
clk = tegra_clk_register_periph_fixed("sor_safe", "pll_p", 0, clk_base,
1, 17, 222);
clks[TEGRA210_CLK_SOR_SAFE] = clk;
clk = tegra_clk_register_periph_fixed("dpaux", "sor_safe", 0, clk_base,
1, 17, 181);
clks[TEGRA210_CLK_DPAUX] = clk;
clk = tegra_clk_register_periph_fixed("dpaux1", "sor_safe", 0, clk_base,
1, 17, 207);
clks[TEGRA210_CLK_DPAUX1] = clk;
/* pll_d_dsi_out */
clk = clk_register_gate(NULL, "pll_d_dsi_out", "pll_d_out0", 0,
clk_base + PLLD_MISC0, 21, 0, &pll_d_lock);
clks[TEGRA210_CLK_PLL_D_DSI_OUT] = clk;
/* dsia */
clk = tegra_clk_register_periph_gate("dsia", "pll_d_dsi_out", 0,
clk_base, 0, 48,
periph_clk_enb_refcnt);
clks[TEGRA210_CLK_DSIA] = clk;
/* dsib */
clk = tegra_clk_register_periph_gate("dsib", "pll_d_dsi_out", 0,
clk_base, 0, 82,
periph_clk_enb_refcnt);
clks[TEGRA210_CLK_DSIB] = clk;
/* emc mux */
clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
ARRAY_SIZE(mux_pllmcp_clkm), 0,
clk_base + CLK_SOURCE_EMC,
29, 3, 0, &emc_lock);
clk = tegra_clk_register_mc("mc", "emc_mux", clk_base + CLK_SOURCE_EMC,
&emc_lock);
clks[TEGRA210_CLK_MC] = clk;
/* cml0 */
clk = clk_register_gate(NULL, "cml0", "pll_e", 0, clk_base + PLLE_AUX,
0, 0, &pll_e_lock);
clk_register_clkdev(clk, "cml0", NULL);
clks[TEGRA210_CLK_CML0] = clk;
/* cml1 */
clk = clk_register_gate(NULL, "cml1", "pll_e", 0, clk_base + PLLE_AUX,
1, 0, &pll_e_lock);
clk_register_clkdev(clk, "cml1", NULL);
clks[TEGRA210_CLK_CML1] = clk;
tegra_periph_clk_init(clk_base, pmc_base, tegra210_clks, &pll_p_params);
}
static void __init tegra210_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
struct clk *clk;
/* PLLC */
clk = tegra_clk_register_pllxc_tegra210("pll_c", "pll_ref", clk_base,
pmc, 0, &pll_c_params, NULL);
if (!WARN_ON(IS_ERR(clk)))
clk_register_clkdev(clk, "pll_c", NULL);
clks[TEGRA210_CLK_PLL_C] = clk;
/* PLLC_OUT1 */
clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c",
clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
8, 8, 1, NULL);
clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div",
clk_base + PLLC_OUT, 1, 0,
CLK_SET_RATE_PARENT, 0, NULL);
clk_register_clkdev(clk, "pll_c_out1", NULL);
clks[TEGRA210_CLK_PLL_C_OUT1] = clk;
/* PLLC_UD */
clk = clk_register_fixed_factor(NULL, "pll_c_ud", "pll_c",
CLK_SET_RATE_PARENT, 1, 1);
clk_register_clkdev(clk, "pll_c_ud", NULL);
clks[TEGRA210_CLK_PLL_C_UD] = clk;
/* PLLC2 */
clk = tegra_clk_register_pllc_tegra210("pll_c2", "pll_ref", clk_base,
pmc, 0, &pll_c2_params, NULL);
clk_register_clkdev(clk, "pll_c2", NULL);
clks[TEGRA210_CLK_PLL_C2] = clk;
/* PLLC3 */
clk = tegra_clk_register_pllc_tegra210("pll_c3", "pll_ref", clk_base,
pmc, 0, &pll_c3_params, NULL);
clk_register_clkdev(clk, "pll_c3", NULL);
clks[TEGRA210_CLK_PLL_C3] = clk;
/* PLLM */
clk = tegra_clk_register_pllm("pll_m", "osc", clk_base, pmc,
CLK_SET_RATE_GATE, &pll_m_params, NULL);
clk_register_clkdev(clk, "pll_m", NULL);
clks[TEGRA210_CLK_PLL_M] = clk;
/* PLLMB */
clk = tegra_clk_register_pllmb("pll_mb", "osc", clk_base, pmc,
CLK_SET_RATE_GATE, &pll_mb_params, NULL);
clk_register_clkdev(clk, "pll_mb", NULL);
clks[TEGRA210_CLK_PLL_MB] = clk;
clk_register_clkdev(clk, "pll_m_out1", NULL);
clks[TEGRA210_CLK_PLL_M_OUT1] = clk;
/* PLLM_UD */
clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m",
CLK_SET_RATE_PARENT, 1, 1);
clk_register_clkdev(clk, "pll_m_ud", NULL);
clks[TEGRA210_CLK_PLL_M_UD] = clk;
/* PLLU_VCO */
clk = tegra_clk_register_pllu_tegra210("pll_u_vco", "pll_ref",
clk_base, 0, &pll_u_vco_params,
&pll_u_lock);
clk_register_clkdev(clk, "pll_u_vco", NULL);
clks[TEGRA210_CLK_PLL_U] = clk;
/* PLLU_OUT */
clk = clk_register_divider_table(NULL, "pll_u_out", "pll_u_vco", 0,
clk_base + PLLU_BASE, 16, 4, 0,
pll_vco_post_div_table, NULL);
clk_register_clkdev(clk, "pll_u_out", NULL);
clks[TEGRA210_CLK_PLL_U_OUT] = clk;
/* PLLU_OUT1 */
clk = tegra_clk_register_divider("pll_u_out1_div", "pll_u_out",
clk_base + PLLU_OUTA, 0,
TEGRA_DIVIDER_ROUND_UP,
8, 8, 1, &pll_u_lock);
clk = tegra_clk_register_pll_out("pll_u_out1", "pll_u_out1_div",
clk_base + PLLU_OUTA, 1, 0,
CLK_SET_RATE_PARENT, 0, &pll_u_lock);
clk_register_clkdev(clk, "pll_u_out1", NULL);
clks[TEGRA210_CLK_PLL_U_OUT1] = clk;
/* PLLU_OUT2 */
clk = tegra_clk_register_divider("pll_u_out2_div", "pll_u_out",
clk_base + PLLU_OUTA, 0,
TEGRA_DIVIDER_ROUND_UP,
24, 8, 1, &pll_u_lock);
clk = tegra_clk_register_pll_out("pll_u_out2", "pll_u_out2_div",
clk_base + PLLU_OUTA, 17, 16,
CLK_SET_RATE_PARENT, 0, &pll_u_lock);
clk_register_clkdev(clk, "pll_u_out2", NULL);
clks[TEGRA210_CLK_PLL_U_OUT2] = clk;
/* PLLU_480M */
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u_vco",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
22, 0, &pll_u_lock);
clk_register_clkdev(clk, "pll_u_480M", NULL);
clks[TEGRA210_CLK_PLL_U_480M] = clk;
/* PLLU_60M */
clk = clk_register_gate(NULL, "pll_u_60M", "pll_u_out2",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
23, 0, NULL);
clk_register_clkdev(clk, "pll_u_60M", NULL);
clks[TEGRA210_CLK_PLL_U_60M] = clk;
/* PLLU_48M */
clk = clk_register_gate(NULL, "pll_u_48M", "pll_u_out1",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
25, 0, NULL);
clk_register_clkdev(clk, "pll_u_48M", NULL);
clks[TEGRA210_CLK_PLL_U_48M] = clk;
/* PLLD */
clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc, 0,
&pll_d_params, &pll_d_lock);
clk_register_clkdev(clk, "pll_d", NULL);
clks[TEGRA210_CLK_PLL_D] = clk;
/* PLLD_OUT0 */
clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d",
CLK_SET_RATE_PARENT, 1, 2);
clk_register_clkdev(clk, "pll_d_out0", NULL);
clks[TEGRA210_CLK_PLL_D_OUT0] = clk;
/* PLLRE */
clk = tegra_clk_register_pllre_tegra210("pll_re_vco", "pll_ref",
clk_base, pmc, 0,
&pll_re_vco_params,
&pll_re_lock, pll_ref_freq);
clk_register_clkdev(clk, "pll_re_vco", NULL);
clks[TEGRA210_CLK_PLL_RE_VCO] = clk;
clk = clk_register_divider_table(NULL, "pll_re_out", "pll_re_vco", 0,
clk_base + PLLRE_BASE, 16, 5, 0,
pll_vco_post_div_table, &pll_re_lock);
clk_register_clkdev(clk, "pll_re_out", NULL);
clks[TEGRA210_CLK_PLL_RE_OUT] = clk;
clk = tegra_clk_register_divider("pll_re_out1_div", "pll_re_vco",
clk_base + PLLRE_OUT1, 0,
TEGRA_DIVIDER_ROUND_UP,
8, 8, 1, NULL);
clk = tegra_clk_register_pll_out("pll_re_out1", "pll_re_out1_div",
clk_base + PLLRE_OUT1, 1, 0,
CLK_SET_RATE_PARENT, 0, NULL);
clks[TEGRA210_CLK_PLL_RE_OUT1] = clk;
/* PLLE */
clk = tegra_clk_register_plle_tegra210("pll_e", "pll_ref",
clk_base, 0, &pll_e_params, NULL);
clk_register_clkdev(clk, "pll_e", NULL);
clks[TEGRA210_CLK_PLL_E] = clk;
/* PLLC4 */
clk = tegra_clk_register_pllre("pll_c4_vco", "pll_ref", clk_base, pmc,
0, &pll_c4_vco_params, NULL, pll_ref_freq);
clk_register_clkdev(clk, "pll_c4_vco", NULL);
clks[TEGRA210_CLK_PLL_C4] = clk;
/* PLLC4_OUT0 */
clk = clk_register_divider_table(NULL, "pll_c4_out0", "pll_c4_vco", 0,
clk_base + PLLC4_BASE, 19, 4, 0,
pll_vco_post_div_table, NULL);
clk_register_clkdev(clk, "pll_c4_out0", NULL);
clks[TEGRA210_CLK_PLL_C4_OUT0] = clk;
/* PLLC4_OUT1 */
clk = clk_register_fixed_factor(NULL, "pll_c4_out1", "pll_c4_vco",
CLK_SET_RATE_PARENT, 1, 3);
clk_register_clkdev(clk, "pll_c4_out1", NULL);
clks[TEGRA210_CLK_PLL_C4_OUT1] = clk;
/* PLLC4_OUT2 */
clk = clk_register_fixed_factor(NULL, "pll_c4_out2", "pll_c4_vco",
CLK_SET_RATE_PARENT, 1, 5);
clk_register_clkdev(clk, "pll_c4_out2", NULL);
clks[TEGRA210_CLK_PLL_C4_OUT2] = clk;
/* PLLC4_OUT3 */
clk = tegra_clk_register_divider("pll_c4_out3_div", "pll_c4_out0",
clk_base + PLLC4_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
8, 8, 1, NULL);
clk = tegra_clk_register_pll_out("pll_c4_out3", "pll_c4_out3_div",
clk_base + PLLC4_OUT, 1, 0,
CLK_SET_RATE_PARENT, 0, NULL);
clk_register_clkdev(clk, "pll_c4_out3", NULL);
clks[TEGRA210_CLK_PLL_C4_OUT3] = clk;
/* PLLDP */
clk = tegra_clk_register_pllss_tegra210("pll_dp", "pll_ref", clk_base,
0, &pll_dp_params, NULL);
clk_register_clkdev(clk, "pll_dp", NULL);
clks[TEGRA210_CLK_PLL_DP] = clk;
/* PLLD2 */
clk = tegra_clk_register_pllss_tegra210("pll_d2", "pll_ref", clk_base,
0, &pll_d2_params, NULL);
clk_register_clkdev(clk, "pll_d2", NULL);
clks[TEGRA210_CLK_PLL_D2] = clk;
/* PLLD2_OUT0 */
clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2",
CLK_SET_RATE_PARENT, 1, 1);
clk_register_clkdev(clk, "pll_d2_out0", NULL);
clks[TEGRA210_CLK_PLL_D2_OUT0] = clk;
/* PLLP_OUT2 */
clk = clk_register_fixed_factor(NULL, "pll_p_out2", "pll_p",
CLK_SET_RATE_PARENT, 1, 2);
clk_register_clkdev(clk, "pll_p_out2", NULL);
clks[TEGRA210_CLK_PLL_P_OUT2] = clk;
}
/* Tegra210 CPU clock and reset control functions */
static void tegra210_wait_cpu_in_reset(u32 cpu)
{
unsigned int reg;
do {
reg = readl(clk_base + CLK_RST_CONTROLLER_CPU_CMPLX_STATUS);
cpu_relax();
} while (!(reg & (1 << cpu))); /* check CPU been reset or not */
}
static void tegra210_disable_cpu_clock(u32 cpu)
{
/* flow controller would take care in the power sequence. */
}
#ifdef CONFIG_PM_SLEEP
static void tegra210_cpu_clock_suspend(void)
{
/* switch coresite to clk_m, save off original source */
tegra210_cpu_clk_sctx.clk_csite_src =
readl(clk_base + CLK_SOURCE_CSITE);
writel(3 << 30, clk_base + CLK_SOURCE_CSITE);
}
static void tegra210_cpu_clock_resume(void)
{
writel(tegra210_cpu_clk_sctx.clk_csite_src,
clk_base + CLK_SOURCE_CSITE);
}
#endif
static struct tegra_cpu_car_ops tegra210_cpu_car_ops = {
.wait_for_reset = tegra210_wait_cpu_in_reset,
.disable_clock = tegra210_disable_cpu_clock,
#ifdef CONFIG_PM_SLEEP
.suspend = tegra210_cpu_clock_suspend,
.resume = tegra210_cpu_clock_resume,
#endif
};
static const struct of_device_id pmc_match[] __initconst = {
{ .compatible = "nvidia,tegra210-pmc" },
{ },
};
static struct tegra_clk_init_table init_table[] __initdata = {
{ TEGRA210_CLK_UARTA, TEGRA210_CLK_PLL_P, 408000000, 0 },
{ TEGRA210_CLK_UARTB, TEGRA210_CLK_PLL_P, 408000000, 0 },
{ TEGRA210_CLK_UARTC, TEGRA210_CLK_PLL_P, 408000000, 0 },
{ TEGRA210_CLK_UARTD, TEGRA210_CLK_PLL_P, 408000000, 0 },
{ TEGRA210_CLK_PLL_A, TEGRA210_CLK_CLK_MAX, 564480000, 1 },
{ TEGRA210_CLK_PLL_A_OUT0, TEGRA210_CLK_CLK_MAX, 11289600, 1 },
{ TEGRA210_CLK_EXTERN1, TEGRA210_CLK_PLL_A_OUT0, 0, 1 },
{ TEGRA210_CLK_CLK_OUT_1_MUX, TEGRA210_CLK_EXTERN1, 0, 1 },
{ TEGRA210_CLK_CLK_OUT_1, TEGRA210_CLK_CLK_MAX, 0, 1 },
{ TEGRA210_CLK_I2S0, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
{ TEGRA210_CLK_I2S1, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
{ TEGRA210_CLK_I2S2, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
{ TEGRA210_CLK_I2S3, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
{ TEGRA210_CLK_I2S4, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
{ TEGRA210_CLK_HOST1X, TEGRA210_CLK_PLL_P, 136000000, 1 },
{ TEGRA210_CLK_SCLK_MUX, TEGRA210_CLK_PLL_P, 0, 1 },
{ TEGRA210_CLK_SCLK, TEGRA210_CLK_CLK_MAX, 102000000, 1 },
{ TEGRA210_CLK_DFLL_SOC, TEGRA210_CLK_PLL_P, 51000000, 1 },
{ TEGRA210_CLK_DFLL_REF, TEGRA210_CLK_PLL_P, 51000000, 1 },
{ TEGRA210_CLK_SBC4, TEGRA210_CLK_PLL_P, 12000000, 1 },
{ TEGRA210_CLK_PLL_RE_VCO, TEGRA210_CLK_CLK_MAX, 672000000, 1 },
{ TEGRA210_CLK_XUSB_GATE, TEGRA210_CLK_CLK_MAX, 0, 1 },
{ TEGRA210_CLK_XUSB_SS_SRC, TEGRA210_CLK_PLL_U_480M, 120000000, 0 },
{ TEGRA210_CLK_XUSB_FS_SRC, TEGRA210_CLK_PLL_U_48M, 48000000, 0 },
{ TEGRA210_CLK_XUSB_HS_SRC, TEGRA210_CLK_XUSB_SS_SRC, 120000000, 0 },
{ TEGRA210_CLK_XUSB_SSP_SRC, TEGRA210_CLK_XUSB_SS_SRC, 120000000, 0 },
{ TEGRA210_CLK_XUSB_FALCON_SRC, TEGRA210_CLK_PLL_P_OUT_XUSB, 204000000, 0 },
{ TEGRA210_CLK_XUSB_HOST_SRC, TEGRA210_CLK_PLL_P_OUT_XUSB, 102000000, 0 },
{ TEGRA210_CLK_XUSB_DEV_SRC, TEGRA210_CLK_PLL_P_OUT_XUSB, 102000000, 0 },
{ TEGRA210_CLK_SATA, TEGRA210_CLK_PLL_P, 104000000, 0 },
{ TEGRA210_CLK_SATA_OOB, TEGRA210_CLK_PLL_P, 204000000, 0 },
{ TEGRA210_CLK_EMC, TEGRA210_CLK_CLK_MAX, 0, 1 },
{ TEGRA210_CLK_MSELECT, TEGRA210_CLK_CLK_MAX, 0, 1 },
{ TEGRA210_CLK_CSITE, TEGRA210_CLK_CLK_MAX, 0, 1 },
{ TEGRA210_CLK_TSENSOR, TEGRA210_CLK_CLK_M, 400000, 0 },
{ TEGRA210_CLK_I2C1, TEGRA210_CLK_PLL_P, 0, 0 },
{ TEGRA210_CLK_I2C2, TEGRA210_CLK_PLL_P, 0, 0 },
{ TEGRA210_CLK_I2C3, TEGRA210_CLK_PLL_P, 0, 0 },
{ TEGRA210_CLK_I2C4, TEGRA210_CLK_PLL_P, 0, 0 },
{ TEGRA210_CLK_I2C5, TEGRA210_CLK_PLL_P, 0, 0 },
{ TEGRA210_CLK_I2C6, TEGRA210_CLK_PLL_P, 0, 0 },
{ TEGRA210_CLK_PLL_DP, TEGRA210_CLK_CLK_MAX, 270000000, 0 },
{ TEGRA210_CLK_SOC_THERM, TEGRA210_CLK_PLL_P, 51000000, 0 },
{ TEGRA210_CLK_CCLK_G, TEGRA210_CLK_CLK_MAX, 0, 1 },
/* This MUST be the last entry. */
{ TEGRA210_CLK_CLK_MAX, TEGRA210_CLK_CLK_MAX, 0, 0 },
};
/**
* tegra210_clock_apply_init_table - initialize clocks on Tegra210 SoCs
*
* Program an initial clock rate and enable or disable clocks needed
* by the rest of the kernel, for Tegra210 SoCs. It is intended to be
* called by assigning a pointer to it to tegra_clk_apply_init_table -
* this will be called as an arch_initcall. No return value.
*/
static void __init tegra210_clock_apply_init_table(void)
{
tegra_init_from_table(init_table, clks, TEGRA210_CLK_CLK_MAX);
}
/**
* tegra210_clock_init - Tegra210-specific clock initialization
* @np: struct device_node * of the DT node for the SoC CAR IP block
*
* Register most SoC clocks for the Tegra210 system-on-chip. Intended
* to be called by the OF init code when a DT node with the
* "nvidia,tegra210-car" string is encountered, and declared with
* CLK_OF_DECLARE. No return value.
*/
static void __init tegra210_clock_init(struct device_node *np)
{
struct device_node *node;
u32 value, clk_m_div;
clk_base = of_iomap(np, 0);
if (!clk_base) {
pr_err("ioremap tegra210 CAR failed\n");
return;
}
node = of_find_matching_node(NULL, pmc_match);
if (!node) {
pr_err("Failed to find pmc node\n");
WARN_ON(1);
return;
}
pmc_base = of_iomap(node, 0);
if (!pmc_base) {
pr_err("Can't map pmc registers\n");
WARN_ON(1);
return;
}
clks = tegra_clk_init(clk_base, TEGRA210_CLK_CLK_MAX,
TEGRA210_CAR_BANK_COUNT);
if (!clks)
return;
value = clk_readl(clk_base + SPARE_REG0) >> CLK_M_DIVISOR_SHIFT;
clk_m_div = (value & CLK_M_DIVISOR_MASK) + 1;
if (tegra_osc_clk_init(clk_base, tegra210_clks, tegra210_input_freq,
ARRAY_SIZE(tegra210_input_freq), clk_m_div,
&osc_freq, &pll_ref_freq) < 0)
return;
tegra_fixed_clk_init(tegra210_clks);
tegra210_pll_init(clk_base, pmc_base);
tegra210_periph_clk_init(clk_base, pmc_base);
tegra_audio_clk_init(clk_base, pmc_base, tegra210_clks,
tegra210_audio_plls,
ARRAY_SIZE(tegra210_audio_plls));
tegra_pmc_clk_init(pmc_base, tegra210_clks);
/* For Tegra210, PLLD is the only source for DSIA & DSIB */
value = clk_readl(clk_base + PLLD_BASE);
value &= ~BIT(25);
clk_writel(value, clk_base + PLLD_BASE);
tegra_clk_apply_init_table = tegra210_clock_apply_init_table;
tegra_super_clk_gen5_init(clk_base, pmc_base, tegra210_clks,
&pll_x_params);
tegra_add_of_provider(np);
tegra_register_devclks(devclks, ARRAY_SIZE(devclks));
tegra_cpu_car_ops = &tegra210_cpu_car_ops;
}
CLK_OF_DECLARE(tegra210, "nvidia,tegra210-car", tegra210_clock_init);