leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
92b83c8f32
linux/include/asm-powerpc/cputable.h

495 lines
19 KiB
C
Raw Normal View History

[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#ifndef __ASM_POWERPC_CPUTABLE_H
#define __ASM_POWERPC_CPUTABLE_H
[PATCH] powerpc: Consolidate asm compatibility macros This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 01:56:55 +00:00
#include <asm/asm-compat.h>
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#define PPC_FEATURE_32 0x80000000
#define PPC_FEATURE_64 0x40000000
#define PPC_FEATURE_601_INSTR 0x20000000
#define PPC_FEATURE_HAS_ALTIVEC 0x10000000
#define PPC_FEATURE_HAS_FPU 0x08000000
#define PPC_FEATURE_HAS_MMU 0x04000000
#define PPC_FEATURE_HAS_4xxMAC 0x02000000
#define PPC_FEATURE_UNIFIED_CACHE 0x01000000
#define PPC_FEATURE_HAS_SPE 0x00800000
#define PPC_FEATURE_HAS_EFP_SINGLE 0x00400000
#define PPC_FEATURE_HAS_EFP_DOUBLE 0x00200000
Merge changes from linux-2.6 by hand
2005-10-22 06:51:34 +00:00
#define PPC_FEATURE_NO_TB 0x00100000
powerpc: Add user CPU features for POWER4, POWER5, POWER5+ and Cell. This is at the request of the glibc folks, who want to use these bits to select libraries optimized for the microarchitecture and new instructions in these processors. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 03:29:18 +00:00
#define PPC_FEATURE_POWER4 0x00080000
#define PPC_FEATURE_POWER5 0x00040000
#define PPC_FEATURE_POWER5_PLUS 0x00020000
#define PPC_FEATURE_CELL 0x00010000
powerpc: Provide a suitable AT_PLATFORM value The glibc folks want to use AT_PLATFORM to select between possible alternative versions of shared libraries. This commit makes the kernel supply an AT_PLATFORM string that indicates what class of processor we are running on. Processors with the same set of user-level instructions and roughly the same instruction scheduling characteristics are given the same AT_PLATFORM value; for example, 821, 823 and 860 are all reported as "ppc823", and 7447, 7447A, 7448, 7450, 7451, 7455 are all called "ppc7450". The intention is that the AT_PLATFORM values match the values that gcc accepts for the -mcpu= option. For values which are numeric (e.g. -mcpu=750), "ppc" has been prepended. This also adds a PPC_FEATURE_BOOKE bit to the AT_HWCAP value and sets it for the 440 family and the Freescale 85xx family. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 23:11:39 +00:00
#define PPC_FEATURE_BOOKE 0x00008000
[PATCH] powerpc: Expose SMT and L1 icache snoop userland features This patch makes userland aware of the icache snoop capability of the POWER5 (and possibly others in the future) and of SMT capabilities. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-01 04:07:07 +00:00
#define PPC_FEATURE_SMT 0x00004000
#define PPC_FEATURE_ICACHE_SNOOP 0x00002000
[PATCH] powerpc: Add cputable entry for POWER6 Add a cputable entry for the POWER6 processor. The SIHV and SIPR bits in the mmcra have moved in POWER6, so disable support for that until oprofile is fixed. Also tell firmware that we know about POWER6. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28 23:51:06 +00:00
#define PPC_FEATURE_ARCH_2_05 0x00001000
[POWERPC] powerpc: PA6T cputable entry, PVR value Introduce PWRficient PA6T cputable entries and feature bits. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-06 19:35:57 +00:00
#define PPC_FEATURE_PA6T 0x00000800
[POWERPC] Distinguish POWER6 partition modes and tell userspace This adds code to look at the properties firmware puts in the device tree to determine what compatibility mode the partition is in on POWER6 machines, and set the ELF aux vector AT_HWCAP and AT_PLATFORM entries appropriately. Specifically, we look at the cpu-version property in the cpu node(s). If that contains a "logical" PVR value (of the form 0x0f00000x), we call identify_cpu again with this PVR value. A value of 0x0f000001 indicates the partition is in POWER5+ compatibility mode, and a value of 0x0f000002 indicates "POWER6 architected" mode, with various extensions disabled. We also look for various other properties: ibm,dfp, ibm,purr and ibm,spurr. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-10 09:38:53 +00:00
#define PPC_FEATURE_HAS_DFP 0x00000400
#define PPC_FEATURE_POWER6_EXT 0x00000200
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
#define PPC_FEATURE_TRUE_LE 0x00000002
#define PPC_FEATURE_PPC_LE 0x00000001
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
/* This structure can grow, it's real size is used by head.S code
* via the mkdefs mechanism.
*/
struct cpu_spec;
typedef void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec);
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 05:07:08 +00:00
typedef void (*cpu_restore_t)(void);
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
[PATCH] ppc64: Fix oprofile when compiled as a module My recent changes to oprofile broke it when built as a module. Fix it by using an enum instead of a function pointer. This way we still retain the oprofile configuration in the cputable. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 04:41:31 +00:00
enum powerpc_oprofile_type {
[PATCH] powerpc: oprofile cpu type names clash with other code In 2.6.15-git6 a change was commited in the oprofile support in the powerpc architecture. It introduced the powerpc_oprofile_type which contains the define G4. This causes a name clash with the existing wacom usb tablet driver. CC [M] drivers/usb/input/wacom.o drivers/usb/input/wacom.c:98: error: conflicting types for `G4' include/asm/cputable.h:37: error: previous declaration of `G4' CC [M] drivers/usb/mon/mon_text.o make[3]: *** [drivers/usb/input/wacom.o] Error 1 make[2]: *** [drivers/usb/input] Error 2 The elements of an enum declared in global scope are effectivly global identifiers themselves. As such we need to ensure the names are unique. This patch updates the later oprofile support to use unique names. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 12:35:49 +00:00
PPC_OPROFILE_INVALID = 0,
PPC_OPROFILE_RS64 = 1,
PPC_OPROFILE_POWER4 = 2,
PPC_OPROFILE_G4 = 3,
PPC_OPROFILE_BOOKE = 4,
[POWERPC] cell: Add oprofile support Add PPU event-based and cycle-based profiling support to Oprofile for Cell. Oprofile is expected to collect data on all CPUs simultaneously. However, there is one set of performance counters per node. There are two hardware threads or virtual CPUs on each node. Hence, OProfile must multiplex in time the performance counter collection on the two virtual CPUs. The multiplexing of the performance counters is done by a virtual counter routine. Initially, the counters are configured to collect data on the even CPUs in the system, one CPU per node. In order to capture the PC for the virtual CPU when the performance counter interrupt occurs (the specified number of events between samples has occurred), the even processors are configured to handle the performance counter interrupts for their node. The virtual counter routine is called via a kernel timer after the virtual sample time. The routine stops the counters, saves the current counts, loads the last counts for the other virtual CPU on the node, sets interrupts to be handled by the other virtual CPU and restarts the counters, the virtual timer routine is scheduled to run again. The virtual sample time is kept relatively small to make sure sampling occurs on both CPUs on the node with a relatively small granularity. Whenever the counters overflow, the performance counter interrupt is called to collect the PC for the CPU where data is being collected. The oprofile driver relies on a firmware RTAS call to setup the debug bus to route the desired signals to the performance counter hardware to be counted. The RTAS call must set the routing registers appropriately in each of the islands to pass the signals down the debug bus as well as routing the signals from a particular island onto the bus. There is a second firmware RTAS call to reset the debug bus to the non pass thru state when the counters are not in use. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-20 17:45:16 +00:00
PPC_OPROFILE_CELL = 5,
[POWERPC] pasemi: PA6T oprofile support Oprofile support for PA6T, kernel side. Also rename the PA6T_SPRN.* defines to SPRN_PA6T.*. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-18 06:38:21 +00:00
PPC_OPROFILE_PA6T = 6,
[PATCH] ppc64: Fix oprofile when compiled as a module My recent changes to oprofile broke it when built as a module. Fix it by using an enum instead of a function pointer. This way we still retain the oprofile configuration in the cputable. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 04:41:31 +00:00
};
[POWERPC] Add PMC type to cputable Add cputable entries for which type of PMC implementation the processor has. I've only filled in the current 64-bit processors, the unfilled default value will have same behaviour as before so it can be done over time as needed. Also tidy up the dummy_perf implementation a bit, aggregating it into one function with ifdefs instead of several. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-29 03:23:54 +00:00
enum powerpc_pmc_type {
PPC_PMC_DEFAULT = 0,
PPC_PMC_IBM = 1,
PPC_PMC_PA6T = 2,
};
[POWERPC] Reworking machine check handling and Fix 440/440A This adds a cputable function pointer for the CPU-side machine check handling. The semantic is still the same as the old one, the one in ppc_md. overrides the one in cputable, though ultimately we'll want to change that so the CPU gets first. This removes CONFIG_440A which was a problem for multiplatform kernels and instead fixes up the IVOR at runtime from a setup_cpu function. The "A" version of the machine check also tweaks the regs->trap value to differenciate the 2 versions at the C level. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-21 04:39:21 +00:00
struct pt_regs;
extern int machine_check_generic(struct pt_regs *regs);
extern int machine_check_4xx(struct pt_regs *regs);
extern int machine_check_440A(struct pt_regs *regs);
extern int machine_check_e500(struct pt_regs *regs);
extern int machine_check_e200(struct pt_regs *regs);
[POWERPC] Fix performance monitor on machines with logical PVR Some IBM machines supply a "logical" PVR (processor version register) value in the device tree in the cpu nodes rather than the real PVR. This is used for instance to indicate that the processors in a POWER6 partition have been configured by the hypervisor to run in POWER5+ mode rather than POWER6 mode. To cope with this, we call identify_cpu a second time with the logical PVR value (the first call is with the real PVR value in the very early setup code). However, POWER5+ machines can also supply a logical PVR value, and use the same value (the value that indicates a v2.04 architecture compliant processor). This causes problems for code that uses the performance monitor (such as oprofile), because the PMU registers are different in POWER6 (even in POWER5+ mode) from the real POWER5+. This change works around this problem by taking out the PMU information from the cputable entries for the logical PVR values, and changing identify_cpu so that the second call to it won't overwrite the PMU information that was established by the first call (the one with the real PVR), but does update the other fields. Specifically, if the cputable entry for the logical PVR value has num_pmcs == 0, none of the PMU-related fields get used. So that we can create a mixed cputable entry, we now make cur_cpu_spec point to a single static struct cpu_spec, and copy stuff from cpu_specs[i] into it. This has the side-effect that we can now make cpu_specs[] be initdata. Ultimately it would be good to move the PMU-related fields out to a separate structure, pointed to by the cputable entries, and change identify_cpu so that it saves the PMU info pointer, copies the whole structure, and restores the PMU info pointer, rather than identify_cpu having to list all the fields that are *not* PMU-related. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2007-10-04 04:18:01 +00:00
/* NOTE WELL: Update identify_cpu() if fields are added or removed! */
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
struct cpu_spec {
/* CPU is matched via (PVR & pvr_mask) == pvr_value */
unsigned int pvr_mask;
unsigned int pvr_value;
char *cpu_name;
unsigned long cpu_features; /* Kernel features */
unsigned int cpu_user_features; /* Userland features */
/* cache line sizes */
unsigned int icache_bsize;
unsigned int dcache_bsize;
/* number of performance monitor counters */
unsigned int num_pmcs;
[POWERPC] Add PMC type to cputable Add cputable entries for which type of PMC implementation the processor has. I've only filled in the current 64-bit processors, the unfilled default value will have same behaviour as before so it can be done over time as needed. Also tidy up the dummy_perf implementation a bit, aggregating it into one function with ifdefs instead of several. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-29 03:23:54 +00:00
enum powerpc_pmc_type pmc_type;
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
/* this is called to initialize various CPU bits like L1 cache,
* BHT, SPD, etc... from head.S before branching to identify_machine
*/
cpu_setup_t cpu_setup;
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 05:07:08 +00:00
/* Used to restore cpu setup on secondary processors and at resume */
cpu_restore_t cpu_restore;
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
/* Used by oprofile userspace to select the right counters */
char *oprofile_cpu_type;
/* Processor specific oprofile operations */
[PATCH] ppc64: Fix oprofile when compiled as a module My recent changes to oprofile broke it when built as a module. Fix it by using an enum instead of a function pointer. This way we still retain the oprofile configuration in the cputable. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 04:41:31 +00:00
enum powerpc_oprofile_type oprofile_type;
powerpc: Provide a suitable AT_PLATFORM value The glibc folks want to use AT_PLATFORM to select between possible alternative versions of shared libraries. This commit makes the kernel supply an AT_PLATFORM string that indicates what class of processor we are running on. Processors with the same set of user-level instructions and roughly the same instruction scheduling characteristics are given the same AT_PLATFORM value; for example, 821, 823 and 860 are all reported as "ppc823", and 7447, 7447A, 7448, 7450, 7451, 7455 are all called "ppc7450". The intention is that the AT_PLATFORM values match the values that gcc accepts for the -mcpu= option. For values which are numeric (e.g. -mcpu=750), "ppc" has been prepended. This also adds a PPC_FEATURE_BOOKE bit to the AT_HWCAP value and sets it for the 440 family and the Freescale 85xx family. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 23:11:39 +00:00
[PATCH] powerpc: oprofile support for POWER6 POWER6 moves some of the MMCRA bits and also requires some bits to be cleared each PMU interrupt. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-08 04:42:34 +00:00
/* Bit locations inside the mmcra change */
unsigned long oprofile_mmcra_sihv;
unsigned long oprofile_mmcra_sipr;
/* Bits to clear during an oprofile exception */
unsigned long oprofile_mmcra_clear;
powerpc: Provide a suitable AT_PLATFORM value The glibc folks want to use AT_PLATFORM to select between possible alternative versions of shared libraries. This commit makes the kernel supply an AT_PLATFORM string that indicates what class of processor we are running on. Processors with the same set of user-level instructions and roughly the same instruction scheduling characteristics are given the same AT_PLATFORM value; for example, 821, 823 and 860 are all reported as "ppc823", and 7447, 7447A, 7448, 7450, 7451, 7455 are all called "ppc7450". The intention is that the AT_PLATFORM values match the values that gcc accepts for the -mcpu= option. For values which are numeric (e.g. -mcpu=750), "ppc" has been prepended. This also adds a PPC_FEATURE_BOOKE bit to the AT_HWCAP value and sets it for the 440 family and the Freescale 85xx family. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 23:11:39 +00:00
/* Name of processor class, for the ELF AT_PLATFORM entry */
char *platform;
[POWERPC] Reworking machine check handling and Fix 440/440A This adds a cputable function pointer for the CPU-side machine check handling. The semantic is still the same as the old one, the one in ppc_md. overrides the one in cputable, though ultimately we'll want to change that so the CPU gets first. This removes CONFIG_440A which was a problem for multiplatform kernels and instead fixes up the IVOR at runtime from a setup_cpu function. The "A" version of the machine check also tweaks the regs->trap value to differenciate the 2 versions at the C level. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-21 04:39:21 +00:00
/* Processor specific machine check handling. Return negative
* if the error is fatal, 1 if it was fully recovered and 0 to
* pass up (not CPU originated) */
int (*machine_check)(struct pt_regs *regs);
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
};
extern struct cpu_spec *cur_cpu_spec;
[POWERPC] Consolidate feature fixup code There are currently two versions of the functions for applying the feature fixups, one for CPU features and one for firmware features. In addition, they are both in assembly and with separate implementations for 32 and 64 bits. identify_cpu() is also implemented in assembly and separately for 32 and 64 bits. This patch replaces them with a pair of C functions. The call sites are slightly moved on ppc64 as well to be called from C instead of from assembly, though it's a very small change, and thus shouldn't cause any problem. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 06:42:40 +00:00
extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;
[POWERPC] Distinguish POWER6 partition modes and tell userspace This adds code to look at the properties firmware puts in the device tree to determine what compatibility mode the partition is in on POWER6 machines, and set the ELF aux vector AT_HWCAP and AT_PLATFORM entries appropriately. Specifically, we look at the cpu-version property in the cpu node(s). If that contains a "logical" PVR value (of the form 0x0f00000x), we call identify_cpu again with this PVR value. A value of 0x0f000001 indicates the partition is in POWER5+ compatibility mode, and a value of 0x0f000002 indicates "POWER6 architected" mode, with various extensions disabled. We also look for various other properties: ibm,dfp, ibm,purr and ibm,spurr. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-10 09:38:53 +00:00
extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr);
[POWERPC] Support feature fixups in vdso's This patch reworks the feature fixup mecanism so vdso's can be fixed up. The main issue was that the construct: .long label (or .llong on 64 bits) will not work in the case of a shared library like the vdso. It will generate an empty placeholder in the fixup table along with a reloc, which is not something we can deal with in the vdso. The idea here (thanks Alan Modra !) is to instead use something like: 1: .long label - 1b That is, the feature fixup tables no longer contain addresses of bits of code to patch, but offsets of such code from the fixup table entry itself. That is properly resolved by ld when building the .so's. I've modified the fixup mecanism generically to use that method for the rest of the kernel as well. Another trick is that the 32 bits vDSO included in the 64 bits kernel need to have a table in the 64 bits format. However, gas does not support 32 bits code with a statement of the form: .llong label - 1b (Or even just .llong label) That is, it cannot emit the right fixup/relocation for the linker to use to assign a 32 bits address to an .llong field. Thus, in the specific case of the 32 bits vdso built as part of the 64 bits kernel, we are using a modified macro that generates: .long 0xffffffff .llong label - 1b Note that is assumes that the value is negative which is enforced by the .lds (those offsets are always negative as the .text is always before the fixup table and gas doesn't support emiting the reloc the other way around). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 01:47:18 +00:00
extern void do_feature_fixups(unsigned long value, void *fixup_start,
void *fixup_end);
powerpc: Merge in the ppc64 version of the prom code. This brings in the ppc64 version of prom_init.c, prom.c and btext.c and makes them work for ppc32. This also brings in the new calling convention, where the first entry to the kernel (with r5 != 0) goes to the prom_init code, which then restarts from the beginning (with r5 == 0) after it has done its stuff. For now this also brings in the ppc32 version of setup.c. It also merges lmb.h. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 02:06:20 +00:00
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#endif /* __ASSEMBLY__ */
/* CPU kernel features */
/* Retain the 32b definitions all use bottom half of word */
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0000000000000001)
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#define CPU_FTR_L2CR ASM_CONST(0x0000000000000002)
#define CPU_FTR_SPEC7450 ASM_CONST(0x0000000000000004)
#define CPU_FTR_ALTIVEC ASM_CONST(0x0000000000000008)
#define CPU_FTR_TAU ASM_CONST(0x0000000000000010)
#define CPU_FTR_CAN_DOZE ASM_CONST(0x0000000000000020)
#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040)
#define CPU_FTR_604_PERF_MON ASM_CONST(0x0000000000000080)
#define CPU_FTR_601 ASM_CONST(0x0000000000000100)
#define CPU_FTR_HPTE_TABLE ASM_CONST(0x0000000000000200)
#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400)
#define CPU_FTR_L3CR ASM_CONST(0x0000000000000800)
#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000)
#define CPU_FTR_NAP_DISABLE_L2_PR ASM_CONST(0x0000000000002000)
#define CPU_FTR_DUAL_PLL_750FX ASM_CONST(0x0000000000004000)
#define CPU_FTR_NO_DPM ASM_CONST(0x0000000000008000)
#define CPU_FTR_HAS_HIGH_BATS ASM_CONST(0x0000000000010000)
#define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000)
#define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000)
#define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000)
[PATCH] powerpc: trivial: Cleanup whitespace in cputable.h Remove redundant whitespace in include/asm-powerpc/cputable.h Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-21 09:45:58 +00:00
#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000)
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
#define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000)
#define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000)
[POWERPC] Add support for FP emulation for the e300c2 core The e300c2 has no FPU. Its MSR[FP] is grounded to zero. If an attempt is made to execute a floating point instruction (including floating-point load, store, or move instructions), the e300c2 takes a floating-point unavailable interrupt. This patch adds support for FP emulation on the e300c2 by declaring a new CPU_FTR_FP_TAKES_FPUNAVAIL, where FP unavail interrupts are intercepted and redirected to the ProgramCheck exception path for correct emulation handling. (If we run out of CPU_FTR bits we could look to reclaim this bit by adding support to test the cpu_user_features for PPC_FEATURE_HAS_FPU instead) It adds a nop to the exception path for 32-bit processors with a FPU. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-08 08:43:30 +00:00
#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x0000000000800000)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTR_UNIFIED_ID_CACHE ASM_CONST(0x0000000001000000)
[POWERPC] Add cpu feature for SPE handling Make it so that SPE support can be determined at runtime. This is similiar to how we handle AltiVec. This allows us to have SPE support built in and work on processors with and without SPE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-13 06:44:20 +00:00
#define CPU_FTR_SPE ASM_CONST(0x0000000002000000)
[POWERPC] Avoid unpaired stwcx. on some processors The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09 22:17:49 +00:00
#define CPU_FTR_NEED_PAIRED_STWCX ASM_CONST(0x0000000004000000)
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
[POWERPC] Simplify the code defining the 64-bit CPU features Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 03:50:39 +00:00
/*
* Add the 64-bit processor unique features in the top half of the word;
* on 32-bit, make the names available but defined to be 0.
*/
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#ifdef __powerpc64__
[POWERPC] Simplify the code defining the 64-bit CPU features Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 03:50:39 +00:00
#define LONG_ASM_CONST(x) ASM_CONST(x)
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#else
[POWERPC] Simplify the code defining the 64-bit CPU features Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 03:50:39 +00:00
#define LONG_ASM_CONST(x) 0
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#endif
[POWERPC] Simplify the code defining the 64-bit CPU features Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 03:50:39 +00:00
#define CPU_FTR_SLB LONG_ASM_CONST(0x0000000100000000)
#define CPU_FTR_16M_PAGE LONG_ASM_CONST(0x0000000200000000)
#define CPU_FTR_TLBIEL LONG_ASM_CONST(0x0000000400000000)
#define CPU_FTR_NOEXECUTE LONG_ASM_CONST(0x0000000800000000)
#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000)
#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000)
#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000008000000000)
#define CPU_FTR_SMT LONG_ASM_CONST(0x0000010000000000)
#define CPU_FTR_LOCKLESS_TLBIE LONG_ASM_CONST(0x0000040000000000)
#define CPU_FTR_CI_LARGE_PAGE LONG_ASM_CONST(0x0000100000000000)
#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000)
#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000)
[POWERPC] Cell timebase bug workaround The Cell CPU timebase has an erratum. When reading the entire 64 bits of the timebase with one mftb instruction, there is a handful of cycles window during which one might read a value with the low order 32 bits already reset to 0x00000000 but the high order bits not yet incremeted by one. This fixes it by reading the timebase again until the low order 32 bits is no longer 0. That might introduce occasional latencies if hitting mftb just at the wrong time, but no more than 70ns on a cell blade, and that was considered acceptable. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 04:37:05 +00:00
#define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000)
[POWERPC] Distinguish POWER6 partition modes and tell userspace This adds code to look at the properties firmware puts in the device tree to determine what compatibility mode the partition is in on POWER6 machines, and set the ELF aux vector AT_HWCAP and AT_PLATFORM entries appropriately. Specifically, we look at the cpu-version property in the cpu node(s). If that contains a "logical" PVR value (of the form 0x0f00000x), we call identify_cpu again with this PVR value. A value of 0x0f000001 indicates the partition is in POWER5+ compatibility mode, and a value of 0x0f000002 indicates "POWER6 architected" mode, with various extensions disabled. We also look for various other properties: ibm,dfp, ibm,purr and ibm,spurr. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-10 09:38:53 +00:00
#define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000)
[POWERPC] Add DSCR SPR to sysfs POWER6 adds a new SPR, the data stream control register (DSCR). It can be used to adjust how agressive the prefetch mechanisms are. Its possible we may want to context switch this, but for now just export it to userspace via sysfs so we can adjust it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 06:46:58 +00:00
#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000)
[POWERPC] Use 1TB segments This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 10:37:10 +00:00
#define CPU_FTR_1T_SEGMENT LONG_ASM_CONST(0x0004000000000000)
[POWERPC] Add 1TB workaround for PA6T PA6T has a bug where the slbie instruction does not honor the large segment bit. As a result, we have to always use slbia when switching context. We don't have to worry about changing the slbie's during fault processing, since they should never be replacing one VSID with another using the same ESID. I.e. there's no risk for inserting duplicate entries due to a failed slbie of the old entry. So as long as we clear it out on context switch we should be fine. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-15 14:58:59 +00:00
#define CPU_FTR_NO_SLBIE_B LONG_ASM_CONST(0x0008000000000000)
[POWERPC] Simplify the code defining the 64-bit CPU features Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 03:50:39 +00:00
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#ifndef __ASSEMBLY__
[POWERPC] Fix cputable.h for combined build Remove CPU_FTR_16M_PAGE from the cupfeatures mask at runtime on iSeries. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-30 00:46:22 +00:00
#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_SLB | \
CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE)
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
/* We only set the altivec features if the kernel was compiled with altivec
* support
*/
#ifdef CONFIG_ALTIVEC
#define CPU_FTR_ALTIVEC_COMP CPU_FTR_ALTIVEC
#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC
#else
#define CPU_FTR_ALTIVEC_COMP 0
#define PPC_FEATURE_HAS_ALTIVEC_COMP 0
#endif
[POWERPC] Add cpu feature for SPE handling Make it so that SPE support can be determined at runtime. This is similiar to how we handle AltiVec. This allows us to have SPE support built in and work on processors with and without SPE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-13 06:44:20 +00:00
/* We only set the spe features if the kernel was compiled with spe
* support
*/
#ifdef CONFIG_SPE
#define CPU_FTR_SPE_COMP CPU_FTR_SPE
#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE
#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE
#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE
#else
#define CPU_FTR_SPE_COMP 0
#define PPC_FEATURE_HAS_SPE_COMP 0
#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0
#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0
#endif
[POWERPC] mpc82xx: Define CPU_FTR_NEED_COHERENT The 8272 (and presumably other PCI PQ2 chips) appear to have the same issue as the 83xx regarding PCI streaming DMA. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 20:32:14 +00:00
/* We need to mark all pages as being coherent if we're SMP or we have a
* 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II
* require it for PCI "streaming/prefetch" to work properly.
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
*/
[PATCH] powerpc: Enable coherency for all pages on 83xx to fix PCI data corruption On the 83xx platform to ensure the PCI inbound memory is handled properly we have to turn on coherency for all pages in the MMU. Otherwise we see corruption if inbound "prefetching/streaming" is enabled on the PCI controller. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-22 15:46:02 +00:00
#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
[POWERPC] mpc82xx: Define CPU_FTR_NEED_COHERENT The 8272 (and presumably other PCI PQ2 chips) appear to have the same issue as the 83xx regarding PCI streaming DMA. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 20:32:14 +00:00
|| defined(CONFIG_PPC_83xx) || defined(CONFIG_8260)
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT
#else
#define CPU_FTR_COMMON 0
#endif
/* The powersave features NAP & DOZE seems to confuse BDI when
debugging. So if a BDI is used, disable theses
*/
#ifndef CONFIG_BDI_SWITCH
#define CPU_FTR_MAYBE_CAN_DOZE CPU_FTR_CAN_DOZE
#define CPU_FTR_MAYBE_CAN_NAP CPU_FTR_CAN_NAP
#else
#define CPU_FTR_MAYBE_CAN_DOZE 0
#define CPU_FTR_MAYBE_CAN_NAP 0
#endif
#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \
!defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \
!defined(CONFIG_BOOKE))
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_PPC601 (CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE)
#define CPU_FTRS_603 (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_604 (CPU_FTR_COMMON | \
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE | \
CPU_FTR_PPC_LE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_740_NOTAU (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_740 (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
CPU_FTR_PPC_LE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_750 (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
CPU_FTR_PPC_LE)
[POWERPC] Consolidate PowerPC 750 cputable features The 750 CPU_FTR macros have quite a bit of duplication in them. Consolidate them to use CPU_FTRS_750 and only list the unique features for derivatives. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-02 16:06:53 +00:00
#define CPU_FTRS_750CL (CPU_FTRS_750 | CPU_FTR_HAS_HIGH_BATS)
#define CPU_FTRS_750FX1 (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM)
#define CPU_FTRS_750FX2 (CPU_FTRS_750 | CPU_FTR_NO_DPM)
#define CPU_FTRS_750FX (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | \
CPU_FTR_HAS_HIGH_BATS)
#define CPU_FTRS_750GX (CPU_FTRS_750FX)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7400_NOTAU (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7400 (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7450_20 (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
[POWERPC] Avoid unpaired stwcx. on some processors The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09 22:17:49 +00:00
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7450_21 (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
[POWERPC] Avoid unpaired stwcx. on some processors The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09 22:17:49 +00:00
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7450_23 (CPU_FTR_COMMON | \
[POWERPC] Avoid unpaired stwcx. on some processors The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09 22:17:49 +00:00
CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7455_1 (CPU_FTR_COMMON | \
[POWERPC] Avoid unpaired stwcx. on some processors The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09 22:17:49 +00:00
CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \
CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7455_20 (CPU_FTR_COMMON | \
[POWERPC] Avoid unpaired stwcx. on some processors The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09 22:17:49 +00:00
CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS | CPU_FTR_PPC_LE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7455 (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
[POWERPC] Avoid unpaired stwcx. on some processors The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09 22:17:49 +00:00
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7447_10 (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
[POWERPC] Avoid unpaired stwcx. on some processors The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09 22:17:49 +00:00
CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \
CPU_FTR_NEED_PAIRED_STWCX)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7447 (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
[POWERPC] Avoid unpaired stwcx. on some processors The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09 22:17:49 +00:00
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7447A (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
[POWERPC] Avoid unpaired stwcx. on some processors The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09 22:17:49 +00:00
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_7448 (CPU_FTR_COMMON | \
[POWERPC] Remove CPU_FTR_NEED_COHERENT for 7448. Remove CPU_FTR_NEED_COHERENT for MPC7448 (and single-core MPC86xx). This prevents needlessly setting M=1 when not SMP. Signed-off-by: James.Yang <James.Yang@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-02 21:34:43 +00:00
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
[POWERPC] Avoid unpaired stwcx. on some processors The context switch code in the kernel issues a dummy stwcx. to clear the reservation, as recommended by the architecture. However, some processors can have issues if this stwcx to address A occurs while the reservation is already held to a different address B. To avoid this problem, the dummy stwcx. needs to be paired with a dummy lwarx to the same address. This adds the dummy lwarx, and creates a cpu feature bit to indicate which cpus are affected. Tested on mpc8641_hpcn_defconfig in arch/powerpc; build tested in arch/ppc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-09 22:17:49 +00:00
CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_82XX (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
[POWERPC] mpc82xx: Define CPU_FTR_NEED_COHERENT The 8272 (and presumably other PCI PQ2 chips) appear to have the same issue as the 83xx regarding PCI streaming DMA. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 20:32:14 +00:00
#define CPU_FTRS_G2_LE (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_E300 (CPU_FTR_MAYBE_CAN_DOZE | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
CPU_FTR_COMMON)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_E300C2 (CPU_FTR_MAYBE_CAN_DOZE | \
[POWERPC] Add support for FP emulation for the e300c2 core The e300c2 has no FPU. Its MSR[FP] is grounded to zero. If an attempt is made to execute a floating point instruction (including floating-point load, store, or move instructions), the e300c2 takes a floating-point unavailable interrupt. This patch adds support for FP emulation on the e300c2 by declaring a new CPU_FTR_FP_TAKES_FPUNAVAIL, where FP unavail interrupts are intercepted and redirected to the ProgramCheck exception path for correct emulation handling. (If we run out of CPU_FTR bits we could look to reclaim this bit by adding support to test the cpu_user_features for PPC_FEATURE_HAS_FPU instead) It adds a nop to the exception path for 32-bit processors with a FPU. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-08 08:43:30 +00:00
CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_8XX (CPU_FTR_USE_TB)
#define CPU_FTRS_40X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
#define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
[POWERPC] Add cpu feature for SPE handling Make it so that SPE support can be determined at runtime. This is similiar to how we handle AltiVec. This allows us to have SPE support built in and work on processors with and without SPE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-13 06:44:20 +00:00
#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
CPU_FTR_UNIFIED_ID_CACHE)
#define CPU_FTRS_E500 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
CPU_FTR_NODSISRALIGN)
#define CPU_FTRS_E500_2 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
[POWERPC] Make 64-bit cpu features defined on 32-bit It saves #ifdef'ing in callers if we at least define the 64-bit cpu features for 32-bit also. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-22 23:46:46 +00:00
/* 64-bit CPUs */
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | \
[PATCH] powerpc: Implement support for setting little-endian mode via prctl This adds the PowerPC part of the code to allow processes to change their endian mode via prctl. This also extends the alignment exception handler to be able to fix up alignment exceptions that occur in little-endian mode, both for "PowerPC" little-endian and true little-endian. We always enter signal handlers in big-endian mode -- the support for little-endian mode does not amount to the creation of a little-endian user/kernel ABI. If the signal handler returns, the endian mode is restored to what it was when the signal was delivered. We have two new kernel CPU feature bits, one for PPC little-endian and one for true little-endian. Most of the classic 32-bit processors support PPC little-endian, and this is reflected in the CPU feature table. There are two corresponding feature bits reported to userland in the AT_HWCAP aux vector entry. This is based on an earlier patch by Anton Blanchard. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 06:14:40 +00:00
CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \
CPU_FTR_MMCRA | CPU_FTR_CTRL)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | \
[POWERPC] powerpc: Divorce CPU_FTR_CTRL from CPU_FTR_PPCAS_ARCH_V2_BASE The performance monitor implementation (including CTRL register behaviour) is just included in PPC v2 as an example, it's not truly part of the base. It's actually a somewhat misleading feature, but I'll leave that be for now: The presence of the register is not what the feature bit is used for, but instead it's used to determine if it contains the runlatch bit for idle reporting of the performance monitor. For alternative implementations, the register might still exist but the bit might have different meaning (or no meaning at all). For now, split it off and don't include it in CPU_FTR_PPCAS_ARCH_V2_BASE. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-06 19:35:19 +00:00
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | \
[POWERPC] powerpc: Divorce CPU_FTR_CTRL from CPU_FTR_PPCAS_ARCH_V2_BASE The performance monitor implementation (including CTRL register behaviour) is just included in PPC v2 as an example, it's not truly part of the base. It's actually a somewhat misleading feature, but I'll leave that be for now: The presence of the register is not what the feature bit is used for, but instead it's used to determine if it contains the runlatch bit for idle reporting of the performance monitor. For alternative implementations, the register might still exist but the bit might have different meaning (or no meaning at all). For now, split it off and don't include it in CPU_FTR_PPCAS_ARCH_V2_BASE. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-06 19:35:19 +00:00
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | \
[POWERPC] powerpc: Divorce CPU_FTR_CTRL from CPU_FTR_PPCAS_ARCH_V2_BASE The performance monitor implementation (including CTRL register behaviour) is just included in PPC v2 as an example, it's not truly part of the base. It's actually a somewhat misleading feature, but I'll leave that be for now: The presence of the register is not what the feature bit is used for, but instead it's used to determine if it contains the runlatch bit for idle reporting of the performance monitor. For alternative implementations, the register might still exist but the bit might have different meaning (or no meaning at all). For now, split it off and don't include it in CPU_FTR_PPCAS_ARCH_V2_BASE. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-06 19:35:19 +00:00
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
[PATCH] powerpc: oprofile support for POWER6 POWER6 moves some of the MMCRA bits and also requires some bits to be cleared each PMU interrupt. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-08 04:42:34 +00:00
CPU_FTR_PURR)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | \
[POWERPC] powerpc: Divorce CPU_FTR_CTRL from CPU_FTR_PPCAS_ARCH_V2_BASE The performance monitor implementation (including CTRL register behaviour) is just included in PPC v2 as an example, it's not truly part of the base. It's actually a somewhat misleading feature, but I'll leave that be for now: The presence of the register is not what the feature bit is used for, but instead it's used to determine if it contains the runlatch bit for idle reporting of the performance monitor. For alternative implementations, the register might still exist but the bit might have different meaning (or no meaning at all). For now, split it off and don't include it in CPU_FTR_PPCAS_ARCH_V2_BASE. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-06 19:35:19 +00:00
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
[PATCH] powerpc: Add cputable entry for POWER6 Add a cputable entry for the POWER6 processor. The SIHV and SIPR bits in the mmcra have moved in POWER6, so disable support for that until oprofile is fixed. Also tell firmware that we know about POWER6. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28 23:51:06 +00:00
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
[POWERPC] Add DSCR SPR to sysfs POWER6 adds a new SPR, the data stream control register (DSCR). It can be used to adjust how agressive the prefetch mechanisms are. Its possible we may want to context switch this, but for now just export it to userspace via sysfs so we can adjust it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 06:46:58 +00:00
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
CPU_FTR_DSCR)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_CELL (CPU_FTR_USE_TB | \
[POWERPC] powerpc: Divorce CPU_FTR_CTRL from CPU_FTR_PPCAS_ARCH_V2_BASE The performance monitor implementation (including CTRL register behaviour) is just included in PPC v2 as an example, it's not truly part of the base. It's actually a somewhat misleading feature, but I'll leave that be for now: The presence of the register is not what the feature bit is used for, but instead it's used to determine if it contains the runlatch bit for idle reporting of the performance monitor. For alternative implementations, the register might still exist but the bit might have different meaning (or no meaning at all). For now, split it off and don't include it in CPU_FTR_PPCAS_ARCH_V2_BASE. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-06 19:35:19 +00:00
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
[POWERPC] Cell timebase bug workaround The Cell CPU timebase has an erratum. When reading the entire 64 bits of the timebase with one mftb instruction, there is a handful of cycles window during which one might read a value with the low order 32 bits already reset to 0x00000000 but the high order bits not yet incremeted by one. This fixes it by reading the timebase again until the low order 32 bits is no longer 0. That might introduce occasional latencies if hitting mftb just at the wrong time, but no more than 70ns on a cell blade, and that was considered acceptable. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 04:37:05 +00:00
CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | \
[POWERPC] powerpc: PA6T cputable entry, PVR value Introduce PWRficient PA6T cputable entries and feature bits. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-06 19:35:57 +00:00
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
[POWERPC] Add 1TB workaround for PA6T PA6T has a bug where the slbie instruction does not honor the large segment bit. As a result, we have to always use slbia when switching context. We don't have to worry about changing the slbie's during fault processing, since they should never be replacing one VSID with another using the same ESID. I.e. there's no risk for inserting duplicate entries due to a failed slbie of the old entry. So as long as we clear it out on context switch we should be fine. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-15 14:58:59 +00:00
CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
[POWERPC] Merge CPU features pertaining to icache coherency Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 04:52:57 +00:00
#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | \
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2)
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
[PATCH] powerpc: Dont set 32bit cputable bits on 64bit Milton and I were looking at the cputable code and it looks like we can set spurious bits on 64bit. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-12 20:45:33 +00:00
#ifdef __powerpc64__
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
[PATCH] powerpc: Add cputable entry for POWER6 Add a cputable entry for the POWER6 processor. The SIHV and SIPR bits in the mmcra have moved in POWER6, so disable support for that until oprofile is fixed. Also tell firmware that we know about POWER6. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28 23:51:06 +00:00
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \
[POWERPC] Use 1TB segments This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 10:37:10 +00:00
CPU_FTRS_CELL | CPU_FTRS_PA6T | CPU_FTR_1T_SEGMENT)
[PATCH] powerpc: Dont set 32bit cputable bits on 64bit Milton and I were looking at the cputable code and it looks like we can set spurious bits on 64bit. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-12 20:45:33 +00:00
#else
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
enum {
CPU_FTRS_POSSIBLE =
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#if CLASSIC_PPC
CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU |
CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 |
CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX |
CPU_FTRS_7400_NOTAU | CPU_FTRS_7400 | CPU_FTRS_7450_20 |
CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 |
CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 |
CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX |
[POWERPC] Add support for FP emulation for the e300c2 core The e300c2 has no FPU. Its MSR[FP] is grounded to zero. If an attempt is made to execute a floating point instruction (including floating-point load, store, or move instructions), the e300c2 takes a floating-point unavailable interrupt. This patch adds support for FP emulation on the e300c2 by declaring a new CPU_FTR_FP_TAKES_FPUNAVAIL, where FP unavail interrupts are intercepted and redirected to the ProgramCheck exception path for correct emulation handling. (If we run out of CPU_FTR bits we could look to reclaim this bit by adding support to test the cpu_user_features for PPC_FEATURE_HAS_FPU instead) It adds a nop to the exception path for 32-bit processors with a FPU. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-08 08:43:30 +00:00
CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 |
CPU_FTRS_CLASSIC32 |
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#else
CPU_FTRS_GENERIC_32 |
#endif
#ifdef CONFIG_8xx
CPU_FTRS_8XX |
#endif
#ifdef CONFIG_40x
CPU_FTRS_40X |
#endif
#ifdef CONFIG_44x
CPU_FTRS_44X |
#endif
#ifdef CONFIG_E200
CPU_FTRS_E200 |
#endif
#ifdef CONFIG_E500
CPU_FTRS_E500 | CPU_FTRS_E500_2 |
#endif
0,
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
};
#endif /* __powerpc64__ */
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
[PATCH] powerpc: Dont set 32bit cputable bits on 64bit Milton and I were looking at the cputable code and it looks like we can set spurious bits on 64bit. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-12 20:45:33 +00:00
#ifdef __powerpc64__
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
#define CPU_FTRS_ALWAYS \
(CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \
[PATCH] powerpc: Add cputable entry for POWER6 Add a cputable entry for the POWER6 processor. The SIHV and SIPR bits in the mmcra have moved in POWER6, so disable support for that until oprofile is fixed. Also tell firmware that we know about POWER6. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28 23:51:06 +00:00
CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \
[POWERPC] powerpc: PA6T cputable entry, PVR value Introduce PWRficient PA6T cputable entries and feature bits. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-06 19:35:57 +00:00
CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
[PATCH] powerpc: Dont set 32bit cputable bits on 64bit Milton and I were looking at the cputable code and it looks like we can set spurious bits on 64bit. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-12 20:45:33 +00:00
#else
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
enum {
CPU_FTRS_ALWAYS =
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#if CLASSIC_PPC
CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU &
CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 &
CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX &
CPU_FTRS_7400_NOTAU & CPU_FTRS_7400 & CPU_FTRS_7450_20 &
CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 &
CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 &
CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX &
[POWERPC] Add support for FP emulation for the e300c2 core The e300c2 has no FPU. Its MSR[FP] is grounded to zero. If an attempt is made to execute a floating point instruction (including floating-point load, store, or move instructions), the e300c2 takes a floating-point unavailable interrupt. This patch adds support for FP emulation on the e300c2 by declaring a new CPU_FTR_FP_TAKES_FPUNAVAIL, where FP unavail interrupts are intercepted and redirected to the ProgramCheck exception path for correct emulation handling. (If we run out of CPU_FTR bits we could look to reclaim this bit by adding support to test the cpu_user_features for PPC_FEATURE_HAS_FPU instead) It adds a nop to the exception path for 32-bit processors with a FPU. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-08 08:43:30 +00:00
CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 &
CPU_FTRS_CLASSIC32 &
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#else
CPU_FTRS_GENERIC_32 &
#endif
#ifdef CONFIG_8xx
CPU_FTRS_8XX &
#endif
#ifdef CONFIG_40x
CPU_FTRS_40X &
#endif
#ifdef CONFIG_44x
CPU_FTRS_44X &
#endif
#ifdef CONFIG_E200
CPU_FTRS_E200 &
#endif
#ifdef CONFIG_E500
CPU_FTRS_E500 & CPU_FTRS_E500_2 &
#endif
CPU_FTRS_POSSIBLE,
};
[PATCH] powerpc: work around sparse warnings in cputable.h Christoph noticed that sparse warned about all the enum tags in cuptable.h that had values that required them to be type log. (enum tags are ints according to the standard.) This patch attempts to fix them in the least intrusive way possible by turning them all into #defines except for the 32 bit CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS which are hard to construct that way. This works because these last two contain no bits above 2^31. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 06:36:59 +00:00
#endif /* __powerpc64__ */
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
static inline int cpu_has_feature(unsigned long feature)
{
return (CPU_FTRS_ALWAYS & feature) ||
(CPU_FTRS_POSSIBLE
& cur_cpu_spec->cpu_features
& feature);
}
#endif /* !__ASSEMBLY__ */
#ifdef __ASSEMBLY__
[POWERPC] Support nested cpu feature sections This patch adds some macros that can be used with an explicit label in order to nest cpu features. This should be used very careful but is necessary for the upcoming cell TB fixup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 01:47:16 +00:00
#define BEGIN_FTR_SECTION_NESTED(label) label:
[POWERPC] Support feature fixups in vdso's This patch reworks the feature fixup mecanism so vdso's can be fixed up. The main issue was that the construct: .long label (or .llong on 64 bits) will not work in the case of a shared library like the vdso. It will generate an empty placeholder in the fixup table along with a reloc, which is not something we can deal with in the vdso. The idea here (thanks Alan Modra !) is to instead use something like: 1: .long label - 1b That is, the feature fixup tables no longer contain addresses of bits of code to patch, but offsets of such code from the fixup table entry itself. That is properly resolved by ld when building the .so's. I've modified the fixup mecanism generically to use that method for the rest of the kernel as well. Another trick is that the 32 bits vDSO included in the 64 bits kernel need to have a table in the 64 bits format. However, gas does not support 32 bits code with a statement of the form: .llong label - 1b (Or even just .llong label) That is, it cannot emit the right fixup/relocation for the linker to use to assign a 32 bits address to an .llong field. Thus, in the specific case of the 32 bits vdso built as part of the 64 bits kernel, we are using a modified macro that generates: .long 0xffffffff .llong label - 1b Note that is assumes that the value is negative which is enforced by the .lds (those offsets are always negative as the .text is always before the fixup table and gas doesn't support emiting the reloc the other way around). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 01:47:18 +00:00
#define BEGIN_FTR_SECTION BEGIN_FTR_SECTION_NESTED(97)
[POWERPC] Support nested cpu feature sections This patch adds some macros that can be used with an explicit label in order to nest cpu features. This should be used very careful but is necessary for the upcoming cell TB fixup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 01:47:16 +00:00
#define END_FTR_SECTION_NESTED(msk, val, label) \
[POWERPC] Support feature fixups in vdso's This patch reworks the feature fixup mecanism so vdso's can be fixed up. The main issue was that the construct: .long label (or .llong on 64 bits) will not work in the case of a shared library like the vdso. It will generate an empty placeholder in the fixup table along with a reloc, which is not something we can deal with in the vdso. The idea here (thanks Alan Modra !) is to instead use something like: 1: .long label - 1b That is, the feature fixup tables no longer contain addresses of bits of code to patch, but offsets of such code from the fixup table entry itself. That is properly resolved by ld when building the .so's. I've modified the fixup mecanism generically to use that method for the rest of the kernel as well. Another trick is that the 32 bits vDSO included in the 64 bits kernel need to have a table in the 64 bits format. However, gas does not support 32 bits code with a statement of the form: .llong label - 1b (Or even just .llong label) That is, it cannot emit the right fixup/relocation for the linker to use to assign a 32 bits address to an .llong field. Thus, in the specific case of the 32 bits vdso built as part of the 64 bits kernel, we are using a modified macro that generates: .long 0xffffffff .llong label - 1b Note that is assumes that the value is negative which is enforced by the .lds (those offsets are always negative as the .text is always before the fixup table and gas doesn't support emiting the reloc the other way around). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 01:47:18 +00:00
MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
[POWERPC] Support nested cpu feature sections This patch adds some macros that can be used with an explicit label in order to nest cpu features. This should be used very careful but is necessary for the upcoming cell TB fixup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 01:47:16 +00:00
#define END_FTR_SECTION(msk, val) \
[POWERPC] Support feature fixups in vdso's This patch reworks the feature fixup mecanism so vdso's can be fixed up. The main issue was that the construct: .long label (or .llong on 64 bits) will not work in the case of a shared library like the vdso. It will generate an empty placeholder in the fixup table along with a reloc, which is not something we can deal with in the vdso. The idea here (thanks Alan Modra !) is to instead use something like: 1: .long label - 1b That is, the feature fixup tables no longer contain addresses of bits of code to patch, but offsets of such code from the fixup table entry itself. That is properly resolved by ld when building the .so's. I've modified the fixup mecanism generically to use that method for the rest of the kernel as well. Another trick is that the 32 bits vDSO included in the 64 bits kernel need to have a table in the 64 bits format. However, gas does not support 32 bits code with a statement of the form: .llong label - 1b (Or even just .llong label) That is, it cannot emit the right fixup/relocation for the linker to use to assign a 32 bits address to an .llong field. Thus, in the specific case of the 32 bits vdso built as part of the 64 bits kernel, we are using a modified macro that generates: .long 0xffffffff .llong label - 1b Note that is assumes that the value is negative which is enforced by the .lds (those offsets are always negative as the .text is always before the fixup table and gas doesn't support emiting the reloc the other way around). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 01:47:18 +00:00
END_FTR_SECTION_NESTED(msk, val, 97)
[POWERPC] Support nested cpu feature sections This patch adds some macros that can be used with an explicit label in order to nest cpu features. This should be used very careful but is necessary for the upcoming cell TB fixup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 01:47:16 +00:00
[PATCH] powerpc: merged asm/cputable.h Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-23 19:08:58 +00:00
#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk))
#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0)
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_CPUTABLE_H */
Reference in New Issue Copy Permalink