leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
90bd4e6dd7
linux/arch/arm/mach-davinci/include/mach/da8xx.h

131 lines
4.5 KiB
C
Raw Normal View History

davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
/*
* Chip specific defines for DA8XX/OMAP L1XX SoC
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-26 14:56:58 +00:00
* 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
#define __ASM_ARCH_DAVINCI_DA8XX_H
davinci: Add support for Sharp LCD035Q3DG01 graphical LCD Add support for the Sharp LCD035Q3DG01 graphical LCD. This requires a minor interface change to da8xx_register_lcdc() so that the board code can pass in the platform_data which describes the lcd controller that's to be used. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-16 01:14:19 +00:00
#include <video/da8xx-fb.h>
davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-26 14:56:58 +00:00
#include <linux/platform_device.h>
TI Davinci EMAC : Re-use driver for other platforms. The davinci EMAC peripheral is also available on other TI platforms -notably TI AM3517 SoC. This patch modifies the config option and the platform structure header files so that the driver can be reused on non-davinci platforms as well. Signed-off-by: Sriramakrishnan <srk@ti.com> Acked-by: Chaithrika U S <chaithrika@ti.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-19 10:28:25 +00:00
#include <linux/davinci_emac.h>
davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h> This hushes the following warning: arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’ declared inside parameter list arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-03-26 14:56:58 +00:00
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
#include <mach/serial.h>
#include <mach/edma.h>
#include <mach/i2c.h>
davinci: Audio support for DA830 EVM Define resources for McASP1 used on DA830/OMAP-L137 EVM, add platform device defintion, initialization function. Additionally, this patch also adds version and FIFO related members to platform data structure. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-11 21:01:59 +00:00
#include <mach/asp.h>
davinci: Add MMC/SD support for da850/omap-l138 There are two instances of MMC/SD on da850/omap-l138. Connector for the first instance is available on the EVM. This patch adds support for this instance. This patch also adds support for card detect and write protect switches on da850/omap-l138 EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 19:16:23 +00:00
#include <mach/mmc.h>
davinci: DA8xx: OHCI platform device Add the function to register the OHCI platform device, given the root hub related platform data passed from the board specific code. The platfrom data provide for overriding the OHCI port power and over-current bits at the board level. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-25 19:14:02 +00:00
#include <mach/usb.h>
davinci: da850/omap-l138: add support for SoC suspend This patch adds support for registering for suspend-to-RAM functionality on da850/omap-l138 SoCs. da850 supports wakeup based on external event and RTC alarm. Currently only RTC alarm based wakeup is supported. Support for wakeup based on external event will be added as later improvements. For scheduling an alarm event on RTC some useful code is present in Documentation/rtc.txt Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-17 12:59:32 +00:00
#include <mach/pm.h>
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
davinci: da8xx/omapl1: add support for the second sysconfig module OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 11:51:32 +00:00
extern void __iomem *da8xx_syscfg0_base;
extern void __iomem *da8xx_syscfg1_base;
davinci: DA8XX/OMAP-L1XX: Avoid use of IO_ADDRESS for SYSCFG module Avoid use of IO_ADDRESS() for SYSCFG module by doing an ioremap() instead. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-31 10:17:59 +00:00
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
/*
* The cp_intc interrupt controller for the da8xx isn't in the same
* chunk of physical memory space as the other registers (like it is
* on the davincis) so it needs to be mapped separately. It will be
* mapped early on when the I/O space is mapped and we'll put it just
* before the I/O space in the processor's virtual memory space.
*/
#define DA8XX_CP_INTC_BASE 0xfffee000
#define DA8XX_CP_INTC_SIZE SZ_8K
#define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
davinci: da8xx/omapl1: add support for the second sysconfig module OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 11:51:32 +00:00
#define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000)
#define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x))
davinci: DA8XX/OMAP-L1XX: JTAG ID register should offset from SYSCFG base This makes it clear that JTAG ID register is part of the SYSCFG module Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-31 10:18:00 +00:00
#define DA8XX_JTAG_ID_REG 0x18
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 15:44:01 +00:00
#define DA8XX_CFGCHIP0_REG 0x17c
davinci: DA8xx: CFGCHIP2 register definitions These are needed by the MUSB and OHCI glue layers... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-25 18:24:57 +00:00
#define DA8XX_CFGCHIP2_REG 0x184
davinci: DA850/OMAP-L138: allow async3 source to be changed The patch allows Async3 clock source to be selected between PLL1 SYSCLK2 and PLL0 SYSCLK2. Having Async3 source from PLL1 SYSCLK2 allows peripherals on that domain to remain unaffected by frequency scaling on PLL0. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-31 10:18:05 +00:00
#define DA8XX_CFGCHIP3_REG 0x188
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
davinci: da8xx/omapl1: add support for the second sysconfig module OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 11:51:32 +00:00
#define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000)
#define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x))
davinci: da850/omap-l138: add support for SoC suspend This patch adds support for registering for suspend-to-RAM functionality on da850/omap-l138 SoCs. da850 supports wakeup based on external event and RTC alarm. Currently only RTC alarm based wakeup is supported. Support for wakeup based on external event will be added as later improvements. For scheduling an alarm event on RTC some useful code is present in Documentation/rtc.txt Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-17 12:59:32 +00:00
#define DA8XX_DEEPSLEEP_REG 0x8
davinci: da8xx/omapl1: add support for the second sysconfig module OMAP-L138 adds a second SYSCFG region having useful functionality like deep sleep, pull up/down control and SATA clock stop. This patch makes provision for accessing registers from second SYSCFG region in da8xx code. Note that OMAP-L137 has a single SYSCFG region. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 11:51:32 +00:00
davinci: Move the da830/omap-l137 #defines to header file With the introduction of TI da850/omap-l138, some of the macros defined for da830/omap-l137 will be needed in da850 source file. So, move the common macros to da8xx.h header file. Also, modify the macro names from DA830_... to DA8XX_. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-10 06:08:31 +00:00
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000
#define DA8XX_TIMER64P0_BASE 0x01c20000
#define DA8XX_TIMER64P1_BASE 0x01c21000
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_PSC1_BASE 0x01e27000
davinci: Add platform support for da850/omap-l138 GLCD This patch adds platform support for the graphic display (Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 18:33:14 +00:00
#define DA8XX_LCD_CNTRL_BASE 0x01e13000
davinci: da850/omap-l138: add support for SoC suspend This patch adds support for registering for suspend-to-RAM functionality on da850/omap-l138 SoCs. da850 supports wakeup based on external event and RTC alarm. Currently only RTC alarm based wakeup is supported. Support for wakeup based on external event will be added as later improvements. For scheduling an alarm event on RTC some useful code is present in Documentation/rtc.txt Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-17 12:59:32 +00:00
#define DA8XX_PLL1_BASE 0x01e1a000
davinci: Add MMC/SD support for da850/omap-l138 There are two instances of MMC/SD on da850/omap-l138. Connector for the first instance is available on the EVM. This patch adds support for this instance. This patch also adds support for card detect and write protect switches on da850/omap-l138 EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 19:16:23 +00:00
#define DA8XX_MMCSD0_BASE 0x01c40000
davinci: Add NOR flash support for da850/omap-l138 This patch adds platform data for the 8MB NOR flash found on da850/omap-l138 EVM. Both NOR and NAND can co-exist on da850/omap-l138 as they are using different chip selects. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 21:36:25 +00:00
#define DA8XX_AEMIF_CS2_BASE 0x60000000
davinci: Add NAND flash support for DA850/OMAP-L138 This patch adds platform data for the 512MB NAND Flash found on DA850/OMAP-L138 EVM. Currently it supports only 1-bit ECC. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 20:21:11 +00:00
#define DA8XX_AEMIF_CS3_BASE 0x62000000
#define DA8XX_AEMIF_CTL_BASE 0x68000000
davinci: DA8XX/OMAP-L1XX: add support for cpuidle driver register This patch provides a function to help register cpuidle driver on da8xx/omap-l1xx platforms. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-22 09:42:14 +00:00
#define DA8XX_DDR2_CTL_BASE 0xb0000000
davinci: da850/omap-l138: create static map for SRAM Create static map for internal SRAM and populate SRAM base and size in soc_info structure to allow SRAM allocation functions from arch/arm/mach-davinci/sram.c to work. On DA850 SRAM is used for suspend-to-RAM implementation in places where DDR2 cannot be accessed as its clocks are stopped. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 11:51:39 +00:00
#define DA8XX_ARM_RAM_BASE 0xffff0000
davinci: Move the da830/omap-l137 #defines to header file With the introduction of TI da850/omap-l138, some of the macros defined for da830/omap-l137 will be needed in da850 source file. So, move the common macros to da8xx.h header file. Also, modify the macro names from DA830_... to DA8XX_. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-10 06:08:31 +00:00
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
void __init da830_init(void);
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 10:41:54 +00:00
void __init da850_init(void);
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
int da8xx_register_edma(void);
int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
int da8xx_register_watchdog(void);
DA8xx: MUSB platform device registration Add the function to register the MUSB platform device. Additional compile warning fixes by Sekhar Nori. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-30 19:49:44 +00:00
int da8xx_register_usb20(unsigned mA, unsigned potpgt);
davinci: DA8xx: OHCI platform device Add the function to register the OHCI platform device, given the root hub related platform data passed from the board specific code. The platfrom data provide for overriding the OHCI port power and over-current bits at the board level. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-25 19:14:02 +00:00
int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
int da8xx_register_emac(void);
davinci: Add support for Sharp LCD035Q3DG01 graphical LCD Add support for the Sharp LCD035Q3DG01 graphical LCD. This requires a minor interface change to da8xx_register_lcdc() so that the board code can pass in the platform_data which describes the lcd controller that's to be used. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-16 01:14:19 +00:00
int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
davinci: Add MMC/SD support for da850/omap-l138 There are two instances of MMC/SD on da850/omap-l138. Connector for the first instance is available on the EVM. This patch adds support for this instance. This patch also adds support for card detect and write protect switches on da850/omap-l138 EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 19:16:23 +00:00
int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
davinci: Change DA8xx/OMAP-L13x McASP registration routine name For consistency with existing code, change the name of da8xx_init_mcasp() to da8xx_register_mcasp(). Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-28 22:05:02 +00:00
void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
davinci: Add RTC support for DA8xx/OMAP-L13x SoC's Add RTC support for the da830/omap-l137 and da850/omap-l138 SoC's by leveraging existing the rtc-omap driver. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-16 01:15:54 +00:00
int da8xx_register_rtc(void);
davinci: DA850/OMAP-L138: add frequency scaling support Adds basic frequency scaling support for DA850/OMAP-L138. Currently, frequency scaling only on PLL0 is supported. No scaling of PLL1 as yet. Peripherals like MMC/SD which have a clock input synchronous with ARM clock will not work well since the clock will change behind their backs. Support for notification to such devices to adjust themselves to the new frequency will be added in later patches. Current defconfigs keep CPUFreq disabled so it will not affect normal operation. The OPP defintions assume clock input of 24MHz to the SoC. This is inline with hardcoding of input frequency in the <soc>.c files. At some point this will need to move into board dependent code as new boards appear with a different reference clock. Tested on OMAP-L138 EVM with ondemand governer and a shell script to vary processor load. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-22 15:44:01 +00:00
int da850_register_cpufreq(void);
davinci: DA8XX/OMAP-L1XX: add support for cpuidle driver register This patch provides a function to help register cpuidle driver on da8xx/omap-l1xx platforms. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-22 09:42:14 +00:00
int da8xx_register_cpuidle(void);
davinci: cpuidle: move mapping of DDR2 controller registers out of driver When suspend is supported, both cpuidle and suspend code need to work on DDR2 registers. Instead of mapping the DDR2 registers twice, do it once outside of cpuidle driver and let cpuidle driver get the virtual base address of DDR2 registers. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-16 11:51:37 +00:00
void __iomem * __init da8xx_get_mem_ctlr(void);
davinci: da850/omap-l138: add support for SoC suspend This patch adds support for registering for suspend-to-RAM functionality on da850/omap-l138 SoCs. da850 supports wakeup based on external event and RTC alarm. Currently only RTC alarm based wakeup is supported. Support for wakeup based on external event will be added as later improvements. For scheduling an alarm event on RTC some useful code is present in Documentation/rtc.txt Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-17 12:59:32 +00:00
int da850_register_pm(struct platform_device *pdev);
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
davinci: Add support for Sharp LCD035Q3DG01 graphical LCD Add support for the Sharp LCD035Q3DG01 graphical LCD. This requires a minor interface change to da8xx_register_lcdc() so that the board code can pass in the platform_data which describes the lcd controller that's to be used. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-16 01:14:19 +00:00
extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
Davinci: watchdog reset separation across socs The earlier watchdog reset mechanism had a couple of limitations. First, it embedded a reference to "davinci_wdt_device" inside common code. This forced all derived platforms (da8xx and tnetv107x) to define such a device. This also would have caused problems in including multiple socs in a single build due to symbol redefinition. With this patch, davinci_watchdog_reset() now takes the platform device as an argument. The davinci_soc_info struct has been extended to include a reset function and a watchdog platform_device. arch_reset() then uses these elements to reset the system in a SoC specific fashion. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-01 22:38:28 +00:00
extern struct platform_device da8xx_wdt_device;
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
extern const short da830_emif25_pins[];
extern const short da830_spi0_pins[];
extern const short da830_spi1_pins[];
extern const short da830_mmc_sd_pins[];
extern const short da830_uart0_pins[];
extern const short da830_uart1_pins[];
extern const short da830_uart2_pins[];
extern const short da830_usb20_pins[];
extern const short da830_usb11_pins[];
extern const short da830_uhpi_pins[];
extern const short da830_cpgmac_pins[];
extern const short da830_emif3c_pins[];
extern const short da830_mcasp0_pins[];
extern const short da830_mcasp1_pins[];
extern const short da830_mcasp2_pins[];
extern const short da830_i2c0_pins[];
extern const short da830_i2c1_pins[];
extern const short da830_lcdcntl_pins[];
extern const short da830_pwm_pins[];
extern const short da830_ecap0_pins[];
extern const short da830_ecap1_pins[];
extern const short da830_ecap2_pins[];
extern const short da830_eqep0_pins[];
extern const short da830_eqep1_pins[];
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 10:41:54 +00:00
extern const short da850_uart0_pins[];
extern const short da850_uart1_pins[];
extern const short da850_uart2_pins[];
extern const short da850_i2c0_pins[];
extern const short da850_i2c1_pins[];
davinci: Add EMAC support for da850/omap-l138 Ethernet Media Access Controller (EMAC) on da850/omap-l138 supports 10/100 Mbps operation. It also supports Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) to physical layer (PHY). Phy which supports MII is present on the DA850/OMAP-L138 base board and Phy supporting RMII is present on the UI card. This patch adds support only for the MII Phy. Support for RMII Phy will be added later. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-17 08:47:10 +00:00
extern const short da850_cpgmac_pins[];
davinci: RMII support for DA850/OMAP-L138 EVM DA850/OMAP-L138 EVM has a RMII Ethernet PHY on the UI daughter card. The PHY is enabled by proper programming of the IO Expander (TCA6416) ports. Also for RMII PHY to work, the MDIO clock of MII PHY has to be disabled since both the PHYs have the same address. This is done via the GPIO2[6] pin. This patch adds support for RMII PHY. This patch also adds a menuconfig option to select one or no peripheral connected to expander. Currently, sub-options in this menu are RMII and no peripheral.This menuconfig option is similar to the one present for UI card on DA830/OMAP-L137 EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-30 21:00:53 +00:00
extern const short da850_rmii_pins[];
davinci: Audio support for DA830 EVM Define resources for McASP1 used on DA830/OMAP-L137 EVM, add platform device defintion, initialization function. Additionally, this patch also adds version and FIFO related members to platform data structure. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-11 21:01:59 +00:00
extern const short da850_mcasp_pins[];
davinci: Add platform support for da850/omap-l138 GLCD This patch adds platform support for the graphic display (Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 18:33:14 +00:00
extern const short da850_lcdcntl_pins[];
davinci: Add MMC/SD support for da850/omap-l138 There are two instances of MMC/SD on da850/omap-l138. Connector for the first instance is available on the EVM. This patch adds support for this instance. This patch also adds support for card detect and write protect switches on da850/omap-l138 EVM. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 19:16:23 +00:00
extern const short da850_mmcsd0_pins[];
davinci: Add NAND flash support for DA850/OMAP-L138 This patch adds platform data for the 512MB NAND Flash found on DA850/OMAP-L138 EVM. Currently it supports only 1-bit ECC. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 20:21:11 +00:00
extern const short da850_nand_pins[];
davinci: Add NOR flash support for da850/omap-l138 This patch adds platform data for the 8MB NOR flash found on da850/omap-l138 EVM. Both NOR and NAND can co-exist on da850/omap-l138 as they are using different chip selects. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-13 21:36:25 +00:00
extern const short da850_nor_pins[];
davinci: Add base DA850/OMAP-L138 SoC support The DA850/OMAP-L138 is a new SoC from TI in the same family as DA830/OMAP-L137. Major changes include better support for power management, support for SATA devices and McBSP (same IP as DM644x). DA850/OMAP-L138 documents are available at http://focus.ti.com/docs/prod/folders/print/omap-l138.html. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-16 10:41:54 +00:00
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 01:36:54 +00:00
#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
Reference in New Issue Copy Permalink