linux/drivers/pinctrl/pinctrl-single.c

1995 lines
48 KiB
C
Raw Normal View History

/*
* Generic device tree based pinctrl driver for one register per pin
* type pinmux controllers
*
* Copyright (C) 2012 Texas Instruments, Inc.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/list.h>
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
#include <linux/interrupt.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
#include <linux/of_irq.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_data/pinctrl-single.h>
#include "core.h"
#include "devicetree.h"
#include "pinconf.h"
#include "pinmux.h"
#define DRIVER_NAME "pinctrl-single"
#define PCS_OFF_DISABLED ~0U
/**
* struct pcs_func_vals - mux function register offset and value pair
* @reg: register virtual address
* @val: register value
pinctrl: pinctrl-single: Fix struct/function documentation blocks Add some missing attributes/parameter descriptions, remove other superfluous ones, add struct header titles and fix misspellings. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-single.c:50: warning: Function parameter or member 'mask' not described in 'pcs_func_vals' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'conf' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'nconfs' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:659: warning: Function parameter or member 'pin_pos' not described in 'pcs_add_pin' drivers/pinctrl/pinctrl-single.c:985: warning: Excess function parameter 'pctldev' description in 'pcs_parse_one_pinctrl_entry' drivers/pinctrl/pinctrl-single.c:1357: warning: Cannot understand * @reg: virtual address of interrupt register drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'irq' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'enable' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1458: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1458: warning: Excess function parameter 'pcs_irq' description in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1506: warning: Excess function parameter 'irq' description in 'pcs_irq_chain_handler' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-22-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-13 14:49:26 +00:00
* @mask: mask
*/
struct pcs_func_vals {
void __iomem *reg;
unsigned val;
unsigned mask;
};
/**
* struct pcs_conf_vals - pinconf parameter, pinconf register offset
* and value, enable, disable, mask
* @param: config parameter
* @val: user input bits in the pinconf register
* @enable: enable bits in the pinconf register
* @disable: disable bits in the pinconf register
* @mask: mask bits in the register value
*/
struct pcs_conf_vals {
enum pin_config_param param;
unsigned val;
unsigned enable;
unsigned disable;
unsigned mask;
};
/**
* struct pcs_conf_type - pinconf property name, pinconf param pair
* @name: property name in DTS file
* @param: config parameter
*/
struct pcs_conf_type {
const char *name;
enum pin_config_param param;
};
/**
* struct pcs_function - pinctrl function
* @name: pinctrl function name
* @vals: register and vals array
* @nvals: number of entries in vals array
* @pgnames: array of pingroup names the function uses
* @npgnames: number of pingroup names the function uses
pinctrl: pinctrl-single: Fix struct/function documentation blocks Add some missing attributes/parameter descriptions, remove other superfluous ones, add struct header titles and fix misspellings. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-single.c:50: warning: Function parameter or member 'mask' not described in 'pcs_func_vals' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'conf' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'nconfs' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:659: warning: Function parameter or member 'pin_pos' not described in 'pcs_add_pin' drivers/pinctrl/pinctrl-single.c:985: warning: Excess function parameter 'pctldev' description in 'pcs_parse_one_pinctrl_entry' drivers/pinctrl/pinctrl-single.c:1357: warning: Cannot understand * @reg: virtual address of interrupt register drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'irq' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'enable' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1458: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1458: warning: Excess function parameter 'pcs_irq' description in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1506: warning: Excess function parameter 'irq' description in 'pcs_irq_chain_handler' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-22-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-13 14:49:26 +00:00
* @conf: array of pin configurations
* @nconfs: number of pin configurations available
* @node: list node
*/
struct pcs_function {
const char *name;
struct pcs_func_vals *vals;
unsigned nvals;
const char **pgnames;
int npgnames;
struct pcs_conf_vals *conf;
int nconfs;
struct list_head node;
};
/**
* struct pcs_gpiofunc_range - pin ranges with same mux value of gpio function
* @offset: offset base of pins
* @npins: number pins with the same mux value of gpio function
* @gpiofunc: mux value of gpio function
* @node: list node
*/
struct pcs_gpiofunc_range {
unsigned offset;
unsigned npins;
unsigned gpiofunc;
struct list_head node;
};
/**
* struct pcs_data - wrapper for data needed by pinctrl framework
* @pa: pindesc array
* @cur: index to current element
*
* REVISIT: We should be able to drop this eventually by adding
* support for registering pins individually in the pinctrl
* framework for those drivers that don't need a static array.
*/
struct pcs_data {
struct pinctrl_pin_desc *pa;
int cur;
};
/**
* struct pcs_soc_data - SoC specific settings
* @flags: initial SoC specific PCS_FEAT_xxx values
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
* @irq: optional interrupt for the controller
* @irq_enable_mask: optional SoC specific interrupt enable mask
* @irq_status_mask: optional SoC specific interrupt status mask
* @rearm: optional SoC specific wake-up rearm function
*/
struct pcs_soc_data {
unsigned flags;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
int irq;
unsigned irq_enable_mask;
unsigned irq_status_mask;
void (*rearm)(void);
};
/**
* struct pcs_device - pinctrl device instance
* @res: resources
* @base: virtual address of the controller
* @saved_vals: saved values for the controller
* @size: size of the ioremapped area
* @dev: device entry
* @np: device tree node
* @pctl: pin controller device
* @flags: mask of PCS_FEAT_xxx values
* @missing_nr_pinctrl_cells: for legacy binding, may go away
* @socdata: soc specific data
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
* @lock: spinlock for register access
* @mutex: mutex protecting the lists
* @width: bits per mux register
* @fmask: function register mask
* @fshift: function register shift
* @foff: value to turn mux off
* @fmax: max number of functions in fmask
* @bits_per_mux: number of bits per mux
* @bits_per_pin: number of bits per pin
* @pins: physical pins on the SoC
* @gpiofuncs: list of gpio functions
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
* @irqs: list of interrupt registers
* @chip: chip container for this instance
* @domain: IRQ domain for this instance
* @desc: pin controller descriptor
* @read: register read function to use
* @write: register write function to use
*/
struct pcs_device {
struct resource *res;
void __iomem *base;
void *saved_vals;
unsigned size;
struct device *dev;
struct device_node *np;
struct pinctrl_dev *pctl;
unsigned flags;
#define PCS_CONTEXT_LOSS_OFF (1 << 3)
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
#define PCS_QUIRK_SHARED_IRQ (1 << 2)
#define PCS_FEAT_IRQ (1 << 1)
#define PCS_FEAT_PINCONF (1 << 0)
struct property *missing_nr_pinctrl_cells;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
struct pcs_soc_data socdata;
raw_spinlock_t lock;
struct mutex mutex;
unsigned width;
unsigned fmask;
unsigned fshift;
unsigned foff;
unsigned fmax;
bool bits_per_mux;
unsigned bits_per_pin;
struct pcs_data pins;
struct list_head gpiofuncs;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
struct list_head irqs;
struct irq_chip chip;
struct irq_domain *domain;
struct pinctrl_desc desc;
unsigned (*read)(void __iomem *reg);
void (*write)(unsigned val, void __iomem *reg);
};
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
#define PCS_QUIRK_HAS_SHARED_IRQ (pcs->flags & PCS_QUIRK_SHARED_IRQ)
#define PCS_HAS_IRQ (pcs->flags & PCS_FEAT_IRQ)
#define PCS_HAS_PINCONF (pcs->flags & PCS_FEAT_PINCONF)
static int pcs_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin,
unsigned long *config);
static int pcs_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin,
unsigned long *configs, unsigned num_configs);
static enum pin_config_param pcs_bias[] = {
PIN_CONFIG_BIAS_PULL_DOWN,
PIN_CONFIG_BIAS_PULL_UP,
};
/*
* This lock class tells lockdep that irqchip core that this single
* pinctrl can be in a different category than its parents, so it won't
* report false recursion.
*/
static struct lock_class_key pcs_lock_class;
/* Class for the IRQ request mutex */
static struct lock_class_key pcs_request_class;
/*
* REVISIT: Reads and writes could eventually use regmap or something
* generic. But at least on omaps, some mux registers are performance
* critical as they may need to be remuxed every time before and after
* idle. Adding tests for register access width for every read and
* write like regmap is doing is not desired, and caching the registers
* does not help in this case.
*/
static unsigned __maybe_unused pcs_readb(void __iomem *reg)
{
return readb(reg);
}
static unsigned __maybe_unused pcs_readw(void __iomem *reg)
{
return readw(reg);
}
static unsigned __maybe_unused pcs_readl(void __iomem *reg)
{
return readl(reg);
}
static void __maybe_unused pcs_writeb(unsigned val, void __iomem *reg)
{
writeb(val, reg);
}
static void __maybe_unused pcs_writew(unsigned val, void __iomem *reg)
{
writew(val, reg);
}
static void __maybe_unused pcs_writel(unsigned val, void __iomem *reg)
{
writel(val, reg);
}
static unsigned int pcs_pin_reg_offset_get(struct pcs_device *pcs,
unsigned int pin)
{
unsigned int mux_bytes = pcs->width / BITS_PER_BYTE;
if (pcs->bits_per_mux) {
unsigned int pin_offset_bytes;
pin_offset_bytes = (pcs->bits_per_pin * pin) / BITS_PER_BYTE;
return (pin_offset_bytes / mux_bytes) * mux_bytes;
}
return pin * mux_bytes;
}
static unsigned int pcs_pin_shift_reg_get(struct pcs_device *pcs,
unsigned int pin)
{
return (pin % (pcs->width / pcs->bits_per_pin)) * pcs->bits_per_pin;
}
static void pcs_pin_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s,
unsigned pin)
{
struct pcs_device *pcs;
unsigned int val;
unsigned long offset;
size_t pa;
pcs = pinctrl_dev_get_drvdata(pctldev);
offset = pcs_pin_reg_offset_get(pcs, pin);
val = pcs->read(pcs->base + offset);
if (pcs->bits_per_mux)
val &= pcs->fmask << pcs_pin_shift_reg_get(pcs, pin);
pa = pcs->res->start + offset;
seq_printf(s, "%zx %08x %s ", pa, val, DRIVER_NAME);
}
static void pcs_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map, unsigned num_maps)
{
struct pcs_device *pcs;
pcs = pinctrl_dev_get_drvdata(pctldev);
devm_kfree(pcs->dev, map);
}
static int pcs_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np_config,
struct pinctrl_map **map, unsigned *num_maps);
static const struct pinctrl_ops pcs_pinctrl_ops = {
.get_groups_count = pinctrl_generic_get_group_count,
.get_group_name = pinctrl_generic_get_group_name,
.get_group_pins = pinctrl_generic_get_group_pins,
.pin_dbg_show = pcs_pin_dbg_show,
.dt_node_to_map = pcs_dt_node_to_map,
.dt_free_map = pcs_dt_free_map,
};
static int pcs_get_function(struct pinctrl_dev *pctldev, unsigned pin,
struct pcs_function **func)
{
struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
struct pin_desc *pdesc = pin_desc_get(pctldev, pin);
const struct pinctrl_setting_mux *setting;
struct function_desc *function;
unsigned fselector;
/* If pin is not described in DTS & enabled, mux_setting is NULL. */
setting = pdesc->mux_setting;
if (!setting)
return -ENOTSUPP;
fselector = setting->func;
function = pinmux_generic_get_function(pctldev, fselector);
*func = function->data;
if (!(*func)) {
dev_err(pcs->dev, "%s could not find function%i\n",
__func__, fselector);
return -ENOTSUPP;
}
return 0;
}
static int pcs_set_mux(struct pinctrl_dev *pctldev, unsigned fselector,
unsigned group)
{
struct pcs_device *pcs;
struct function_desc *function;
struct pcs_function *func;
int i;
pcs = pinctrl_dev_get_drvdata(pctldev);
/* If function mask is null, needn't enable it. */
if (!pcs->fmask)
return 0;
function = pinmux_generic_get_function(pctldev, fselector);
func = function->data;
if (!func)
return -EINVAL;
dev_dbg(pcs->dev, "enabling %s function%i\n",
func->name, fselector);
for (i = 0; i < func->nvals; i++) {
struct pcs_func_vals *vals;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
unsigned long flags;
unsigned val, mask;
vals = &func->vals[i];
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
raw_spin_lock_irqsave(&pcs->lock, flags);
val = pcs->read(vals->reg);
if (pcs->bits_per_mux)
mask = vals->mask;
else
mask = pcs->fmask;
val &= ~mask;
val |= (vals->val & mask);
pcs->write(val, vals->reg);
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
raw_spin_unlock_irqrestore(&pcs->lock, flags);
}
return 0;
}
static int pcs_request_gpio(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned pin)
{
struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
struct pcs_gpiofunc_range *frange = NULL;
struct list_head *pos, *tmp;
unsigned data;
/* If function mask is null, return directly. */
if (!pcs->fmask)
return -ENOTSUPP;
list_for_each_safe(pos, tmp, &pcs->gpiofuncs) {
u32 offset;
frange = list_entry(pos, struct pcs_gpiofunc_range, node);
if (pin >= frange->offset + frange->npins
|| pin < frange->offset)
continue;
offset = pcs_pin_reg_offset_get(pcs, pin);
if (pcs->bits_per_mux) {
int pin_shift = pcs_pin_shift_reg_get(pcs, pin);
data = pcs->read(pcs->base + offset);
data &= ~(pcs->fmask << pin_shift);
data |= frange->gpiofunc << pin_shift;
pcs->write(data, pcs->base + offset);
} else {
data = pcs->read(pcs->base + offset);
data &= ~pcs->fmask;
data |= frange->gpiofunc;
pcs->write(data, pcs->base + offset);
}
break;
}
return 0;
}
static const struct pinmux_ops pcs_pinmux_ops = {
.get_functions_count = pinmux_generic_get_function_count,
.get_function_name = pinmux_generic_get_function_name,
.get_function_groups = pinmux_generic_get_function_groups,
.set_mux = pcs_set_mux,
.gpio_request_enable = pcs_request_gpio,
};
/* Clear BIAS value */
static void pcs_pinconf_clear_bias(struct pinctrl_dev *pctldev, unsigned pin)
{
unsigned long config;
int i;
for (i = 0; i < ARRAY_SIZE(pcs_bias); i++) {
config = pinconf_to_config_packed(pcs_bias[i], 0);
pcs_pinconf_set(pctldev, pin, &config, 1);
}
}
/*
* Check whether PIN_CONFIG_BIAS_DISABLE is valid.
* It's depend on that PULL_DOWN & PULL_UP configs are all invalid.
*/
static bool pcs_pinconf_bias_disable(struct pinctrl_dev *pctldev, unsigned pin)
{
unsigned long config;
int i;
for (i = 0; i < ARRAY_SIZE(pcs_bias); i++) {
config = pinconf_to_config_packed(pcs_bias[i], 0);
if (!pcs_pinconf_get(pctldev, pin, &config))
goto out;
}
return true;
out:
return false;
}
static int pcs_pinconf_get(struct pinctrl_dev *pctldev,
unsigned pin, unsigned long *config)
{
struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
struct pcs_function *func;
enum pin_config_param param;
unsigned offset = 0, data = 0, i, j, ret;
ret = pcs_get_function(pctldev, pin, &func);
if (ret)
return ret;
for (i = 0; i < func->nconfs; i++) {
param = pinconf_to_config_param(*config);
if (param == PIN_CONFIG_BIAS_DISABLE) {
if (pcs_pinconf_bias_disable(pctldev, pin)) {
*config = 0;
return 0;
} else {
return -ENOTSUPP;
}
} else if (param != func->conf[i].param) {
continue;
}
offset = pin * (pcs->width / BITS_PER_BYTE);
data = pcs->read(pcs->base + offset) & func->conf[i].mask;
switch (func->conf[i].param) {
/* 4 parameters */
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
if ((data != func->conf[i].enable) ||
(data == func->conf[i].disable))
return -ENOTSUPP;
*config = 0;
break;
/* 2 parameters */
case PIN_CONFIG_INPUT_SCHMITT:
for (j = 0; j < func->nconfs; j++) {
switch (func->conf[j].param) {
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
if (data != func->conf[j].enable)
return -ENOTSUPP;
break;
default:
break;
}
}
*config = data;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
case PIN_CONFIG_SLEW_RATE:
case PIN_CONFIG_MODE_LOW_POWER:
default:
*config = data;
break;
}
return 0;
}
return -ENOTSUPP;
}
static int pcs_pinconf_set(struct pinctrl_dev *pctldev,
unsigned pin, unsigned long *configs,
unsigned num_configs)
{
struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
struct pcs_function *func;
unsigned offset = 0, shift = 0, i, data, ret;
u32 arg;
int j;
ret = pcs_get_function(pctldev, pin, &func);
if (ret)
return ret;
for (j = 0; j < num_configs; j++) {
for (i = 0; i < func->nconfs; i++) {
if (pinconf_to_config_param(configs[j])
!= func->conf[i].param)
continue;
offset = pin * (pcs->width / BITS_PER_BYTE);
data = pcs->read(pcs->base + offset);
arg = pinconf_to_config_argument(configs[j]);
switch (func->conf[i].param) {
/* 2 parameters */
case PIN_CONFIG_INPUT_SCHMITT:
case PIN_CONFIG_DRIVE_STRENGTH:
case PIN_CONFIG_SLEW_RATE:
case PIN_CONFIG_MODE_LOW_POWER:
shift = ffs(func->conf[i].mask) - 1;
data &= ~func->conf[i].mask;
data |= (arg << shift) & func->conf[i].mask;
break;
/* 4 parameters */
case PIN_CONFIG_BIAS_DISABLE:
pcs_pinconf_clear_bias(pctldev, pin);
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_PULL_UP:
if (arg)
pcs_pinconf_clear_bias(pctldev, pin);
fallthrough;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
data &= ~func->conf[i].mask;
if (arg)
data |= func->conf[i].enable;
else
data |= func->conf[i].disable;
break;
default:
return -ENOTSUPP;
}
pcs->write(data, pcs->base + offset);
break;
}
if (i >= func->nconfs)
return -ENOTSUPP;
} /* for each config */
return 0;
}
static int pcs_pinconf_group_get(struct pinctrl_dev *pctldev,
unsigned group, unsigned long *config)
{
const unsigned *pins;
unsigned npins, old = 0;
int i, ret;
ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
if (ret)
return ret;
for (i = 0; i < npins; i++) {
if (pcs_pinconf_get(pctldev, pins[i], config))
return -ENOTSUPP;
/* configs do not match between two pins */
if (i && (old != *config))
return -ENOTSUPP;
old = *config;
}
return 0;
}
static int pcs_pinconf_group_set(struct pinctrl_dev *pctldev,
unsigned group, unsigned long *configs,
unsigned num_configs)
{
const unsigned *pins;
unsigned npins;
int i, ret;
ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
if (ret)
return ret;
for (i = 0; i < npins; i++) {
if (pcs_pinconf_set(pctldev, pins[i], configs, num_configs))
return -ENOTSUPP;
}
return 0;
}
static void pcs_pinconf_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned pin)
{
}
static void pcs_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned selector)
{
}
static void pcs_pinconf_config_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s,
unsigned long config)
{
pinconf_generic_dump_config(pctldev, s, config);
}
static const struct pinconf_ops pcs_pinconf_ops = {
.pin_config_get = pcs_pinconf_get,
.pin_config_set = pcs_pinconf_set,
.pin_config_group_get = pcs_pinconf_group_get,
.pin_config_group_set = pcs_pinconf_group_set,
.pin_config_dbg_show = pcs_pinconf_dbg_show,
.pin_config_group_dbg_show = pcs_pinconf_group_dbg_show,
.pin_config_config_dbg_show = pcs_pinconf_config_dbg_show,
.is_generic = true,
};
/**
* pcs_add_pin() - add a pin to the static per controller pin array
* @pcs: pcs driver instance
* @offset: register offset from base
*/
static int pcs_add_pin(struct pcs_device *pcs, unsigned int offset)
{
struct pcs_soc_data *pcs_soc = &pcs->socdata;
struct pinctrl_pin_desc *pin;
int i;
i = pcs->pins.cur;
if (i >= pcs->desc.npins) {
dev_err(pcs->dev, "too many pins, max %i\n",
pcs->desc.npins);
return -ENOMEM;
}
if (pcs_soc->irq_enable_mask) {
unsigned val;
val = pcs->read(pcs->base + offset);
if (val & pcs_soc->irq_enable_mask) {
dev_dbg(pcs->dev, "irq enabled at boot for pin at %lx (%x), clearing\n",
(unsigned long)pcs->res->start + offset, val);
val &= ~pcs_soc->irq_enable_mask;
pcs->write(val, pcs->base + offset);
}
}
pin = &pcs->pins.pa[i];
pin->number = i;
pcs->pins.cur++;
return i;
}
/**
* pcs_allocate_pin_table() - adds all the pins for the pinctrl driver
* @pcs: pcs driver instance
*
* In case of errors, resources are freed in pcs_free_resources.
*
* If your hardware needs holes in the address space, then just set
* up multiple driver instances.
*/
static int pcs_allocate_pin_table(struct pcs_device *pcs)
{
int mux_bytes, nr_pins, i;
mux_bytes = pcs->width / BITS_PER_BYTE;
if (pcs->bits_per_mux) {
pcs->bits_per_pin = fls(pcs->fmask);
nr_pins = (pcs->size * BITS_PER_BYTE) / pcs->bits_per_pin;
} else {
nr_pins = pcs->size / mux_bytes;
}
dev_dbg(pcs->dev, "allocating %i pins\n", nr_pins);
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
pcs->pins.pa = devm_kcalloc(pcs->dev,
nr_pins, sizeof(*pcs->pins.pa),
GFP_KERNEL);
if (!pcs->pins.pa)
return -ENOMEM;
pcs->desc.pins = pcs->pins.pa;
pcs->desc.npins = nr_pins;
for (i = 0; i < pcs->desc.npins; i++) {
unsigned offset;
int res;
offset = pcs_pin_reg_offset_get(pcs, i);
res = pcs_add_pin(pcs, offset);
if (res < 0) {
dev_err(pcs->dev, "error adding pins: %i\n", res);
return res;
}
}
return 0;
}
/**
* pcs_add_function() - adds a new function to the function list
* @pcs: pcs driver instance
* @fcn: new function allocated
* @name: name of the function
* @vals: array of mux register value pairs used by the function
* @nvals: number of mux register value pairs
* @pgnames: array of pingroup names for the function
* @npgnames: number of pingroup names
*
* Caller must take care of locking.
*/
static int pcs_add_function(struct pcs_device *pcs,
struct pcs_function **fcn,
const char *name,
struct pcs_func_vals *vals,
unsigned int nvals,
const char **pgnames,
unsigned int npgnames)
{
struct pcs_function *function;
int selector;
function = devm_kzalloc(pcs->dev, sizeof(*function), GFP_KERNEL);
if (!function)
return -ENOMEM;
function->vals = vals;
function->nvals = nvals;
function->name = name;
selector = pinmux_generic_add_function(pcs->pctl, name,
pgnames, npgnames,
function);
if (selector < 0) {
devm_kfree(pcs->dev, function);
*fcn = NULL;
} else {
*fcn = function;
}
return selector;
}
/**
* pcs_get_pin_by_offset() - get a pin index based on the register offset
* @pcs: pcs driver instance
* @offset: register offset from the base
*
* Note that this is OK as long as the pins are in a static array.
*/
static int pcs_get_pin_by_offset(struct pcs_device *pcs, unsigned offset)
{
unsigned index;
if (offset >= pcs->size) {
dev_err(pcs->dev, "mux offset out of range: 0x%x (0x%x)\n",
offset, pcs->size);
return -EINVAL;
}
if (pcs->bits_per_mux)
index = (offset * BITS_PER_BYTE) / pcs->bits_per_pin;
else
index = offset / (pcs->width / BITS_PER_BYTE);
return index;
}
/*
* check whether data matches enable bits or disable bits
* Return value: 1 for matching enable bits, 0 for matching disable bits,
* and negative value for matching failure.
*/
static int pcs_config_match(unsigned data, unsigned enable, unsigned disable)
{
int ret = -EINVAL;
if (data == enable)
ret = 1;
else if (data == disable)
ret = 0;
return ret;
}
static void add_config(struct pcs_conf_vals **conf, enum pin_config_param param,
unsigned value, unsigned enable, unsigned disable,
unsigned mask)
{
(*conf)->param = param;
(*conf)->val = value;
(*conf)->enable = enable;
(*conf)->disable = disable;
(*conf)->mask = mask;
(*conf)++;
}
static void add_setting(unsigned long **setting, enum pin_config_param param,
unsigned arg)
{
**setting = pinconf_to_config_packed(param, arg);
(*setting)++;
}
/* add pinconf setting with 2 parameters */
static void pcs_add_conf2(struct pcs_device *pcs, struct device_node *np,
const char *name, enum pin_config_param param,
struct pcs_conf_vals **conf, unsigned long **settings)
{
unsigned value[2], shift;
int ret;
ret = of_property_read_u32_array(np, name, value, 2);
if (ret)
return;
/* set value & mask */
value[0] &= value[1];
shift = ffs(value[1]) - 1;
/* skip enable & disable */
add_config(conf, param, value[0], 0, 0, value[1]);
add_setting(settings, param, value[0] >> shift);
}
/* add pinconf setting with 4 parameters */
static void pcs_add_conf4(struct pcs_device *pcs, struct device_node *np,
const char *name, enum pin_config_param param,
struct pcs_conf_vals **conf, unsigned long **settings)
{
unsigned value[4];
int ret;
/* value to set, enable, disable, mask */
ret = of_property_read_u32_array(np, name, value, 4);
if (ret)
return;
if (!value[3]) {
dev_err(pcs->dev, "mask field of the property can't be 0\n");
return;
}
value[0] &= value[3];
value[1] &= value[3];
value[2] &= value[3];
ret = pcs_config_match(value[0], value[1], value[2]);
if (ret < 0)
dev_dbg(pcs->dev, "failed to match enable or disable bits\n");
add_config(conf, param, value[0], value[1], value[2], value[3]);
add_setting(settings, param, ret);
}
static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
struct pcs_function *func,
struct pinctrl_map **map)
{
struct pinctrl_map *m = *map;
int i = 0, nconfs = 0;
unsigned long *settings = NULL, *s = NULL;
struct pcs_conf_vals *conf = NULL;
static const struct pcs_conf_type prop2[] = {
{ "pinctrl-single,drive-strength", PIN_CONFIG_DRIVE_STRENGTH, },
{ "pinctrl-single,slew-rate", PIN_CONFIG_SLEW_RATE, },
{ "pinctrl-single,input-schmitt", PIN_CONFIG_INPUT_SCHMITT, },
{ "pinctrl-single,low-power-mode", PIN_CONFIG_MODE_LOW_POWER, },
};
static const struct pcs_conf_type prop4[] = {
{ "pinctrl-single,bias-pullup", PIN_CONFIG_BIAS_PULL_UP, },
{ "pinctrl-single,bias-pulldown", PIN_CONFIG_BIAS_PULL_DOWN, },
{ "pinctrl-single,input-schmitt-enable",
PIN_CONFIG_INPUT_SCHMITT_ENABLE, },
};
/* If pinconf isn't supported, don't parse properties in below. */
if (!PCS_HAS_PINCONF)
pinctrl-single: fix pcs_parse_pinconf() return value This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no pinctrl_map is added. The current behavior is to return 0 when !PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry() incorrectly assumes that a map was added and sets num_maps = 2. Analysis: ========= The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf() if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf() returns 0 to indicate there was no error and num_maps is then set to 2: 980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, 981 struct device_node *np, 982 struct pinctrl_map **map, 983 unsigned *num_maps, 984 const char **pgnames) 985 { <snip> 1053 (*map)->type = PIN_MAP_TYPE_MUX_GROUP; 1054 (*map)->data.mux.group = np->name; 1055 (*map)->data.mux.function = np->name; 1056 1057 if (PCS_HAS_PINCONF && function) { 1058 res = pcs_parse_pinconf(pcs, np, function, map); 1059 if (res) 1060 goto free_pingroups; 1061 *num_maps = 2; 1062 } else { 1063 *num_maps = 1; 1064 } However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or !nconfs. I believe these conditions should indicate that no map was added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry() will set num_maps = 2 even though no maps were successfully added, as it does not reach "m++" on line 940: 895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np, 896 struct pcs_function *func, 897 struct pinctrl_map **map) 898 899 { 900 struct pinctrl_map *m = *map; <snip> 917 /* If pinconf isn't supported, don't parse properties in below. */ 918 if (!PCS_HAS_PINCONF) 919 return 0; 920 921 /* cacluate how much properties are supported in current node */ 922 for (i = 0; i < ARRAY_SIZE(prop2); i++) { 923 if (of_find_property(np, prop2[i].name, NULL)) 924 nconfs++; 925 } 926 for (i = 0; i < ARRAY_SIZE(prop4); i++) { 927 if (of_find_property(np, prop4[i].name, NULL)) 928 nconfs++; 929 } 930 if (!nconfs) 919 return 0; 932 933 func->conf = devm_kcalloc(pcs->dev, 934 nconfs, sizeof(struct pcs_conf_vals), 935 GFP_KERNEL); 936 if (!func->conf) 937 return -ENOMEM; 938 func->nconfs = nconfs; 939 conf = &(func->conf[0]); 940 m++; This situtation will cause a boot failure [0] on the BeagleBone Black (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi has compatible = "pinconf-single" instead of "pinctrl-single". The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no map was added. Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps is set to 1 as it is valid for pinconf to be enabled and a given pin group to not any pinconf properties. [0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/ Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf") Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200608125143.GA2789203@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-08 12:51:43 +00:00
return -ENOTSUPP;
/* cacluate how much properties are supported in current node */
for (i = 0; i < ARRAY_SIZE(prop2); i++) {
if (of_find_property(np, prop2[i].name, NULL))
nconfs++;
}
for (i = 0; i < ARRAY_SIZE(prop4); i++) {
if (of_find_property(np, prop4[i].name, NULL))
nconfs++;
}
if (!nconfs)
pinctrl-single: fix pcs_parse_pinconf() return value This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no pinctrl_map is added. The current behavior is to return 0 when !PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry() incorrectly assumes that a map was added and sets num_maps = 2. Analysis: ========= The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf() if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf() returns 0 to indicate there was no error and num_maps is then set to 2: 980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, 981 struct device_node *np, 982 struct pinctrl_map **map, 983 unsigned *num_maps, 984 const char **pgnames) 985 { <snip> 1053 (*map)->type = PIN_MAP_TYPE_MUX_GROUP; 1054 (*map)->data.mux.group = np->name; 1055 (*map)->data.mux.function = np->name; 1056 1057 if (PCS_HAS_PINCONF && function) { 1058 res = pcs_parse_pinconf(pcs, np, function, map); 1059 if (res) 1060 goto free_pingroups; 1061 *num_maps = 2; 1062 } else { 1063 *num_maps = 1; 1064 } However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or !nconfs. I believe these conditions should indicate that no map was added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry() will set num_maps = 2 even though no maps were successfully added, as it does not reach "m++" on line 940: 895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np, 896 struct pcs_function *func, 897 struct pinctrl_map **map) 898 899 { 900 struct pinctrl_map *m = *map; <snip> 917 /* If pinconf isn't supported, don't parse properties in below. */ 918 if (!PCS_HAS_PINCONF) 919 return 0; 920 921 /* cacluate how much properties are supported in current node */ 922 for (i = 0; i < ARRAY_SIZE(prop2); i++) { 923 if (of_find_property(np, prop2[i].name, NULL)) 924 nconfs++; 925 } 926 for (i = 0; i < ARRAY_SIZE(prop4); i++) { 927 if (of_find_property(np, prop4[i].name, NULL)) 928 nconfs++; 929 } 930 if (!nconfs) 919 return 0; 932 933 func->conf = devm_kcalloc(pcs->dev, 934 nconfs, sizeof(struct pcs_conf_vals), 935 GFP_KERNEL); 936 if (!func->conf) 937 return -ENOMEM; 938 func->nconfs = nconfs; 939 conf = &(func->conf[0]); 940 m++; This situtation will cause a boot failure [0] on the BeagleBone Black (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi has compatible = "pinconf-single" instead of "pinctrl-single". The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no map was added. Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps is set to 1 as it is valid for pinconf to be enabled and a given pin group to not any pinconf properties. [0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/ Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf") Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200608125143.GA2789203@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-08 12:51:43 +00:00
return -ENOTSUPP;
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
func->conf = devm_kcalloc(pcs->dev,
nconfs, sizeof(struct pcs_conf_vals),
GFP_KERNEL);
if (!func->conf)
return -ENOMEM;
func->nconfs = nconfs;
conf = &(func->conf[0]);
m++;
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
settings = devm_kcalloc(pcs->dev, nconfs, sizeof(unsigned long),
GFP_KERNEL);
if (!settings)
return -ENOMEM;
s = &settings[0];
for (i = 0; i < ARRAY_SIZE(prop2); i++)
pcs_add_conf2(pcs, np, prop2[i].name, prop2[i].param,
&conf, &s);
for (i = 0; i < ARRAY_SIZE(prop4); i++)
pcs_add_conf4(pcs, np, prop4[i].name, prop4[i].param,
&conf, &s);
m->type = PIN_MAP_TYPE_CONFIGS_GROUP;
m->data.configs.group_or_pin = np->name;
m->data.configs.configs = settings;
m->data.configs.num_configs = nconfs;
return 0;
}
/**
* pcs_parse_one_pinctrl_entry() - parses a device tree mux entry
* @pcs: pinctrl driver instance
* @np: device node of the mux entry
* @map: map entry
* @num_maps: number of map
* @pgnames: pingroup names
*
* Note that this binding currently supports only sets of one register + value.
*
* Also note that this driver tries to avoid understanding pin and function
* names because of the extra bloat they would cause especially in the case of
* a large number of pins. This driver just sets what is specified for the board
* in the .dts file. Further user space debugging tools can be developed to
* decipher the pin and function names using debugfs.
*
* If you are concerned about the boot time, set up the static pins in
* the bootloader, and only set up selected pins as device tree entries.
*/
static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,
struct device_node *np,
struct pinctrl_map **map,
unsigned *num_maps,
const char **pgnames)
{
const char *name = "pinctrl-single,pins";
struct pcs_func_vals *vals;
int rows, *pins, found = 0, res = -ENOMEM, i, fsel, gsel;
struct pcs_function *function = NULL;
rows = pinctrl_count_index_with_args(np, name);
if (rows <= 0) {
dev_err(pcs->dev, "Invalid number of rows: %d\n", rows);
return -EINVAL;
}
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
vals = devm_kcalloc(pcs->dev, rows, sizeof(*vals), GFP_KERNEL);
if (!vals)
return -ENOMEM;
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
pins = devm_kcalloc(pcs->dev, rows, sizeof(*pins), GFP_KERNEL);
if (!pins)
goto free_vals;
for (i = 0; i < rows; i++) {
struct of_phandle_args pinctrl_spec;
unsigned int offset;
int pin;
res = pinctrl_parse_index_with_args(np, name, i, &pinctrl_spec);
if (res)
return res;
if (pinctrl_spec.args_count < 2 || pinctrl_spec.args_count > 3) {
dev_err(pcs->dev, "invalid args_count for spec: %i\n",
pinctrl_spec.args_count);
break;
}
offset = pinctrl_spec.args[0];
vals[found].reg = pcs->base + offset;
switch (pinctrl_spec.args_count) {
case 2:
vals[found].val = pinctrl_spec.args[1];
break;
case 3:
vals[found].val = (pinctrl_spec.args[1] | pinctrl_spec.args[2]);
break;
}
pinctrl: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Barry Song <baohua@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-28 01:52:41 +00:00
dev_dbg(pcs->dev, "%pOFn index: 0x%x value: 0x%x\n",
pinctrl_spec.np, offset, vals[found].val);
pin = pcs_get_pin_by_offset(pcs, offset);
if (pin < 0) {
dev_err(pcs->dev,
pinctrl: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Barry Song <baohua@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-28 01:52:41 +00:00
"could not add functions for %pOFn %ux\n",
np, offset);
break;
}
pins[found++] = pin;
}
pgnames[0] = np->name;
mutex_lock(&pcs->mutex);
fsel = pcs_add_function(pcs, &function, np->name, vals, found,
pgnames, 1);
if (fsel < 0) {
res = fsel;
goto free_pins;
}
gsel = pinctrl_generic_add_group(pcs->pctl, np->name, pins, found, pcs);
if (gsel < 0) {
res = gsel;
goto free_function;
}
(*map)->type = PIN_MAP_TYPE_MUX_GROUP;
(*map)->data.mux.group = np->name;
(*map)->data.mux.function = np->name;
if (PCS_HAS_PINCONF && function) {
res = pcs_parse_pinconf(pcs, np, function, map);
pinctrl-single: fix pcs_parse_pinconf() return value This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no pinctrl_map is added. The current behavior is to return 0 when !PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry() incorrectly assumes that a map was added and sets num_maps = 2. Analysis: ========= The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf() if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf() returns 0 to indicate there was no error and num_maps is then set to 2: 980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, 981 struct device_node *np, 982 struct pinctrl_map **map, 983 unsigned *num_maps, 984 const char **pgnames) 985 { <snip> 1053 (*map)->type = PIN_MAP_TYPE_MUX_GROUP; 1054 (*map)->data.mux.group = np->name; 1055 (*map)->data.mux.function = np->name; 1056 1057 if (PCS_HAS_PINCONF && function) { 1058 res = pcs_parse_pinconf(pcs, np, function, map); 1059 if (res) 1060 goto free_pingroups; 1061 *num_maps = 2; 1062 } else { 1063 *num_maps = 1; 1064 } However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or !nconfs. I believe these conditions should indicate that no map was added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry() will set num_maps = 2 even though no maps were successfully added, as it does not reach "m++" on line 940: 895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np, 896 struct pcs_function *func, 897 struct pinctrl_map **map) 898 899 { 900 struct pinctrl_map *m = *map; <snip> 917 /* If pinconf isn't supported, don't parse properties in below. */ 918 if (!PCS_HAS_PINCONF) 919 return 0; 920 921 /* cacluate how much properties are supported in current node */ 922 for (i = 0; i < ARRAY_SIZE(prop2); i++) { 923 if (of_find_property(np, prop2[i].name, NULL)) 924 nconfs++; 925 } 926 for (i = 0; i < ARRAY_SIZE(prop4); i++) { 927 if (of_find_property(np, prop4[i].name, NULL)) 928 nconfs++; 929 } 930 if (!nconfs) 919 return 0; 932 933 func->conf = devm_kcalloc(pcs->dev, 934 nconfs, sizeof(struct pcs_conf_vals), 935 GFP_KERNEL); 936 if (!func->conf) 937 return -ENOMEM; 938 func->nconfs = nconfs; 939 conf = &(func->conf[0]); 940 m++; This situtation will cause a boot failure [0] on the BeagleBone Black (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi has compatible = "pinconf-single" instead of "pinctrl-single". The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no map was added. Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps is set to 1 as it is valid for pinconf to be enabled and a given pin group to not any pinconf properties. [0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/ Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf") Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200608125143.GA2789203@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-08 12:51:43 +00:00
if (res == 0)
*num_maps = 2;
else if (res == -ENOTSUPP)
*num_maps = 1;
else
goto free_pingroups;
} else {
*num_maps = 1;
}
mutex_unlock(&pcs->mutex);
return 0;
free_pingroups:
pinctrl_generic_remove_group(pcs->pctl, gsel);
*num_maps = 1;
free_function:
pinmux_generic_remove_function(pcs->pctl, fsel);
free_pins:
mutex_unlock(&pcs->mutex);
devm_kfree(pcs->dev, pins);
free_vals:
devm_kfree(pcs->dev, vals);
return res;
}
static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs,
struct device_node *np,
struct pinctrl_map **map,
unsigned *num_maps,
const char **pgnames)
{
const char *name = "pinctrl-single,bits";
struct pcs_func_vals *vals;
int rows, *pins, found = 0, res = -ENOMEM, i, fsel, gsel;
int npins_in_row;
struct pcs_function *function = NULL;
rows = pinctrl_count_index_with_args(np, name);
if (rows <= 0) {
dev_err(pcs->dev, "Invalid number of rows: %d\n", rows);
return -EINVAL;
}
npins_in_row = pcs->width / pcs->bits_per_pin;
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
vals = devm_kzalloc(pcs->dev,
array3_size(rows, npins_in_row, sizeof(*vals)),
GFP_KERNEL);
if (!vals)
return -ENOMEM;
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
pins = devm_kzalloc(pcs->dev,
array3_size(rows, npins_in_row, sizeof(*pins)),
GFP_KERNEL);
if (!pins)
goto free_vals;
for (i = 0; i < rows; i++) {
struct of_phandle_args pinctrl_spec;
unsigned offset, val;
unsigned mask, bit_pos, val_pos, mask_pos, submask;
unsigned pin_num_from_lsb;
int pin;
res = pinctrl_parse_index_with_args(np, name, i, &pinctrl_spec);
if (res)
return res;
if (pinctrl_spec.args_count < 3) {
dev_err(pcs->dev, "invalid args_count for spec: %i\n",
pinctrl_spec.args_count);
break;
}
/* Index plus two value cells */
offset = pinctrl_spec.args[0];
val = pinctrl_spec.args[1];
mask = pinctrl_spec.args[2];
pinctrl: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Barry Song <baohua@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-28 01:52:41 +00:00
dev_dbg(pcs->dev, "%pOFn index: 0x%x value: 0x%x mask: 0x%x\n",
pinctrl_spec.np, offset, val, mask);
/* Parse pins in each row from LSB */
while (mask) {
bit_pos = __ffs(mask);
pin_num_from_lsb = bit_pos / pcs->bits_per_pin;
mask_pos = ((pcs->fmask) << bit_pos);
val_pos = val & mask_pos;
submask = mask & mask_pos;
if ((mask & mask_pos) == 0) {
dev_err(pcs->dev,
pinctrl: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Barry Song <baohua@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-28 01:52:41 +00:00
"Invalid mask for %pOFn at 0x%x\n",
np, offset);
break;
}
mask &= ~mask_pos;
if (submask != mask_pos) {
dev_warn(pcs->dev,
pinctrl: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Barry Song <baohua@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-28 01:52:41 +00:00
"Invalid submask 0x%x for %pOFn at 0x%x\n",
submask, np, offset);
continue;
}
vals[found].mask = submask;
vals[found].reg = pcs->base + offset;
vals[found].val = val_pos;
pin = pcs_get_pin_by_offset(pcs, offset);
if (pin < 0) {
dev_err(pcs->dev,
pinctrl: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Barry Song <baohua@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-28 01:52:41 +00:00
"could not add functions for %pOFn %ux\n",
np, offset);
break;
}
pins[found++] = pin + pin_num_from_lsb;
}
}
pgnames[0] = np->name;
mutex_lock(&pcs->mutex);
fsel = pcs_add_function(pcs, &function, np->name, vals, found,
pgnames, 1);
if (fsel < 0) {
res = fsel;
goto free_pins;
}
gsel = pinctrl_generic_add_group(pcs->pctl, np->name, pins, found, pcs);
if (gsel < 0) {
res = gsel;
goto free_function;
}
(*map)->type = PIN_MAP_TYPE_MUX_GROUP;
(*map)->data.mux.group = np->name;
(*map)->data.mux.function = np->name;
if (PCS_HAS_PINCONF) {
dev_err(pcs->dev, "pinconf not supported\n");
goto free_pingroups;
}
*num_maps = 1;
mutex_unlock(&pcs->mutex);
return 0;
free_pingroups:
pinctrl_generic_remove_group(pcs->pctl, gsel);
*num_maps = 1;
free_function:
pinmux_generic_remove_function(pcs->pctl, fsel);
free_pins:
mutex_unlock(&pcs->mutex);
devm_kfree(pcs->dev, pins);
free_vals:
devm_kfree(pcs->dev, vals);
return res;
}
/**
* pcs_dt_node_to_map() - allocates and parses pinctrl maps
* @pctldev: pinctrl instance
* @np_config: device tree pinmux entry
* @map: array of map entries
* @num_maps: number of maps
*/
static int pcs_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np_config,
struct pinctrl_map **map, unsigned *num_maps)
{
struct pcs_device *pcs;
const char **pgnames;
int ret;
pcs = pinctrl_dev_get_drvdata(pctldev);
/* create 2 maps. One is for pinmux, and the other is for pinconf. */
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
*map = devm_kcalloc(pcs->dev, 2, sizeof(**map), GFP_KERNEL);
if (!*map)
return -ENOMEM;
*num_maps = 0;
pgnames = devm_kzalloc(pcs->dev, sizeof(*pgnames), GFP_KERNEL);
if (!pgnames) {
ret = -ENOMEM;
goto free_map;
}
if (pcs->bits_per_mux) {
ret = pcs_parse_bits_in_pinctrl_entry(pcs, np_config, map,
num_maps, pgnames);
if (ret < 0) {
pinctrl: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Barry Song <baohua@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-28 01:52:41 +00:00
dev_err(pcs->dev, "no pins entries for %pOFn\n",
np_config);
goto free_pgnames;
}
} else {
ret = pcs_parse_one_pinctrl_entry(pcs, np_config, map,
num_maps, pgnames);
if (ret < 0) {
pinctrl: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Barry Song <baohua@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-28 01:52:41 +00:00
dev_err(pcs->dev, "no pins entries for %pOFn\n",
np_config);
goto free_pgnames;
}
}
return 0;
free_pgnames:
devm_kfree(pcs->dev, pgnames);
free_map:
devm_kfree(pcs->dev, *map);
return ret;
}
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
/**
* pcs_irq_free() - free interrupt
* @pcs: pcs driver instance
*/
static void pcs_irq_free(struct pcs_device *pcs)
{
struct pcs_soc_data *pcs_soc = &pcs->socdata;
if (pcs_soc->irq < 0)
return;
if (pcs->domain)
irq_domain_remove(pcs->domain);
if (PCS_QUIRK_HAS_SHARED_IRQ)
free_irq(pcs_soc->irq, pcs_soc);
else
irq_set_chained_handler(pcs_soc->irq, NULL);
}
/**
* pcs_free_resources() - free memory used by this driver
* @pcs: pcs driver instance
*/
static void pcs_free_resources(struct pcs_device *pcs)
{
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
pcs_irq_free(pcs);
pinctrl_unregister(pcs->pctl);
#if IS_BUILTIN(CONFIG_PINCTRL_SINGLE)
if (pcs->missing_nr_pinctrl_cells)
of_remove_property(pcs->np, pcs->missing_nr_pinctrl_cells);
#endif
}
static int pcs_add_gpio_func(struct device_node *node, struct pcs_device *pcs)
{
const char *propname = "pinctrl-single,gpio-range";
const char *cellname = "#pinctrl-single,gpio-range-cells";
struct of_phandle_args gpiospec;
struct pcs_gpiofunc_range *range;
int ret, i;
for (i = 0; ; i++) {
ret = of_parse_phandle_with_args(node, propname, cellname,
i, &gpiospec);
/* Do not treat it as error. Only treat it as end condition. */
if (ret) {
ret = 0;
break;
}
range = devm_kzalloc(pcs->dev, sizeof(*range), GFP_KERNEL);
if (!range) {
ret = -ENOMEM;
break;
}
range->offset = gpiospec.args[0];
range->npins = gpiospec.args[1];
range->gpiofunc = gpiospec.args[2];
mutex_lock(&pcs->mutex);
list_add_tail(&range->node, &pcs->gpiofuncs);
mutex_unlock(&pcs->mutex);
}
return ret;
}
pinctrl: pinctrl-single: Fix struct/function documentation blocks Add some missing attributes/parameter descriptions, remove other superfluous ones, add struct header titles and fix misspellings. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-single.c:50: warning: Function parameter or member 'mask' not described in 'pcs_func_vals' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'conf' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'nconfs' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:659: warning: Function parameter or member 'pin_pos' not described in 'pcs_add_pin' drivers/pinctrl/pinctrl-single.c:985: warning: Excess function parameter 'pctldev' description in 'pcs_parse_one_pinctrl_entry' drivers/pinctrl/pinctrl-single.c:1357: warning: Cannot understand * @reg: virtual address of interrupt register drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'irq' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'enable' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1458: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1458: warning: Excess function parameter 'pcs_irq' description in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1506: warning: Excess function parameter 'irq' description in 'pcs_irq_chain_handler' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-22-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-13 14:49:26 +00:00
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
/**
pinctrl: pinctrl-single: Fix struct/function documentation blocks Add some missing attributes/parameter descriptions, remove other superfluous ones, add struct header titles and fix misspellings. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-single.c:50: warning: Function parameter or member 'mask' not described in 'pcs_func_vals' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'conf' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'nconfs' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:659: warning: Function parameter or member 'pin_pos' not described in 'pcs_add_pin' drivers/pinctrl/pinctrl-single.c:985: warning: Excess function parameter 'pctldev' description in 'pcs_parse_one_pinctrl_entry' drivers/pinctrl/pinctrl-single.c:1357: warning: Cannot understand * @reg: virtual address of interrupt register drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'irq' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'enable' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1458: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1458: warning: Excess function parameter 'pcs_irq' description in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1506: warning: Excess function parameter 'irq' description in 'pcs_irq_chain_handler' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-22-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-13 14:49:26 +00:00
* struct pcs_interrupt
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
* @reg: virtual address of interrupt register
* @hwirq: hardware irq number
* @irq: virtual irq number
* @node: list node
*/
struct pcs_interrupt {
void __iomem *reg;
irq_hw_number_t hwirq;
unsigned int irq;
struct list_head node;
};
/**
* pcs_irq_set() - enables or disables an interrupt
pinctrl: pinctrl-single: Fix struct/function documentation blocks Add some missing attributes/parameter descriptions, remove other superfluous ones, add struct header titles and fix misspellings. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-single.c:50: warning: Function parameter or member 'mask' not described in 'pcs_func_vals' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'conf' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'nconfs' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:659: warning: Function parameter or member 'pin_pos' not described in 'pcs_add_pin' drivers/pinctrl/pinctrl-single.c:985: warning: Excess function parameter 'pctldev' description in 'pcs_parse_one_pinctrl_entry' drivers/pinctrl/pinctrl-single.c:1357: warning: Cannot understand * @reg: virtual address of interrupt register drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'irq' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'enable' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1458: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1458: warning: Excess function parameter 'pcs_irq' description in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1506: warning: Excess function parameter 'irq' description in 'pcs_irq_chain_handler' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-22-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-13 14:49:26 +00:00
* @pcs_soc: SoC specific settings
* @irq: interrupt
* @enable: enable or disable the interrupt
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
*
* Note that this currently assumes one interrupt per pinctrl
* register that is typically used for wake-up events.
*/
static inline void pcs_irq_set(struct pcs_soc_data *pcs_soc,
int irq, const bool enable)
{
struct pcs_device *pcs;
struct list_head *pos;
unsigned mask;
pcs = container_of(pcs_soc, struct pcs_device, socdata);
list_for_each(pos, &pcs->irqs) {
struct pcs_interrupt *pcswi;
unsigned soc_mask;
pcswi = list_entry(pos, struct pcs_interrupt, node);
if (irq != pcswi->irq)
continue;
soc_mask = pcs_soc->irq_enable_mask;
raw_spin_lock(&pcs->lock);
mask = pcs->read(pcswi->reg);
if (enable)
mask |= soc_mask;
else
mask &= ~soc_mask;
pcs->write(mask, pcswi->reg);
/* flush posted write */
mask = pcs->read(pcswi->reg);
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
raw_spin_unlock(&pcs->lock);
}
if (pcs_soc->rearm)
pcs_soc->rearm();
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
}
/**
* pcs_irq_mask() - mask pinctrl interrupt
* @d: interrupt data
*/
static void pcs_irq_mask(struct irq_data *d)
{
struct pcs_soc_data *pcs_soc = irq_data_get_irq_chip_data(d);
pcs_irq_set(pcs_soc, d->irq, false);
}
/**
* pcs_irq_unmask() - unmask pinctrl interrupt
* @d: interrupt data
*/
static void pcs_irq_unmask(struct irq_data *d)
{
struct pcs_soc_data *pcs_soc = irq_data_get_irq_chip_data(d);
pcs_irq_set(pcs_soc, d->irq, true);
}
/**
* pcs_irq_set_wake() - toggle the suspend and resume wake up
* @d: interrupt data
* @state: wake-up state
*
* Note that this should be called only for suspend and resume.
* For runtime PM, the wake-up events should be enabled by default.
*/
static int pcs_irq_set_wake(struct irq_data *d, unsigned int state)
{
if (state)
pcs_irq_unmask(d);
else
pcs_irq_mask(d);
return 0;
}
/**
* pcs_irq_handle() - common interrupt handler
pinctrl: pinctrl-single: Fix struct/function documentation blocks Add some missing attributes/parameter descriptions, remove other superfluous ones, add struct header titles and fix misspellings. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-single.c:50: warning: Function parameter or member 'mask' not described in 'pcs_func_vals' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'conf' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:97: warning: Function parameter or member 'nconfs' not described in 'pcs_function' drivers/pinctrl/pinctrl-single.c:659: warning: Function parameter or member 'pin_pos' not described in 'pcs_add_pin' drivers/pinctrl/pinctrl-single.c:985: warning: Excess function parameter 'pctldev' description in 'pcs_parse_one_pinctrl_entry' drivers/pinctrl/pinctrl-single.c:1357: warning: Cannot understand * @reg: virtual address of interrupt register drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'irq' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1377: warning: Function parameter or member 'enable' not described in 'pcs_irq_set' drivers/pinctrl/pinctrl-single.c:1458: warning: Function parameter or member 'pcs_soc' not described in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1458: warning: Excess function parameter 'pcs_irq' description in 'pcs_irq_handle' drivers/pinctrl/pinctrl-single.c:1506: warning: Excess function parameter 'irq' description in 'pcs_irq_chain_handler' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200713144930.1034632-22-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-13 14:49:26 +00:00
* @pcs_soc: SoC specific settings
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
*
* Note that this currently assumes we have one interrupt bit per
* mux register. This interrupt is typically used for wake-up events.
* For more complex interrupts different handlers can be specified.
*/
static int pcs_irq_handle(struct pcs_soc_data *pcs_soc)
{
struct pcs_device *pcs;
struct list_head *pos;
int count = 0;
pcs = container_of(pcs_soc, struct pcs_device, socdata);
list_for_each(pos, &pcs->irqs) {
struct pcs_interrupt *pcswi;
unsigned mask;
pcswi = list_entry(pos, struct pcs_interrupt, node);
raw_spin_lock(&pcs->lock);
mask = pcs->read(pcswi->reg);
raw_spin_unlock(&pcs->lock);
if (mask & pcs_soc->irq_status_mask) {
generic_handle_irq(irq_find_mapping(pcs->domain,
pcswi->hwirq));
count++;
}
}
return count;
}
/**
* pcs_irq_handler() - handler for the shared interrupt case
* @irq: interrupt
* @d: data
*
* Use this for cases where multiple instances of
* pinctrl-single share a single interrupt like on omaps.
*/
static irqreturn_t pcs_irq_handler(int irq, void *d)
{
struct pcs_soc_data *pcs_soc = d;
return pcs_irq_handle(pcs_soc) ? IRQ_HANDLED : IRQ_NONE;
}
/**
* pcs_irq_handle() - handler for the dedicated chained interrupt case
* @desc: interrupt descriptor
*
* Use this if you have a separate interrupt for each
* pinctrl-single instance.
*/
static void pcs_irq_chain_handler(struct irq_desc *desc)
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
{
struct pcs_soc_data *pcs_soc = irq_desc_get_handler_data(desc);
struct irq_chip *chip;
chip = irq_desc_get_chip(desc);
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
chained_irq_enter(chip, desc);
pcs_irq_handle(pcs_soc);
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
/* REVISIT: export and add handle_bad_irq(irq, desc)? */
chained_irq_exit(chip, desc);
}
static int pcs_irqdomain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct pcs_soc_data *pcs_soc = d->host_data;
struct pcs_device *pcs;
struct pcs_interrupt *pcswi;
pcs = container_of(pcs_soc, struct pcs_device, socdata);
pcswi = devm_kzalloc(pcs->dev, sizeof(*pcswi), GFP_KERNEL);
if (!pcswi)
return -ENOMEM;
pcswi->reg = pcs->base + hwirq;
pcswi->hwirq = hwirq;
pcswi->irq = irq;
mutex_lock(&pcs->mutex);
list_add_tail(&pcswi->node, &pcs->irqs);
mutex_unlock(&pcs->mutex);
irq_set_chip_data(irq, pcs_soc);
irq_set_chip_and_handler(irq, &pcs->chip,
handle_level_irq);
irq_set_lockdep_class(irq, &pcs_lock_class, &pcs_request_class);
irq_set_noprobe(irq);
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
return 0;
}
static const struct irq_domain_ops pcs_irqdomain_ops = {
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
.map = pcs_irqdomain_map,
.xlate = irq_domain_xlate_onecell,
};
/**
* pcs_irq_init_chained_handler() - set up a chained interrupt handler
* @pcs: pcs driver instance
* @np: device node pointer
*/
static int pcs_irq_init_chained_handler(struct pcs_device *pcs,
struct device_node *np)
{
struct pcs_soc_data *pcs_soc = &pcs->socdata;
const char *name = "pinctrl";
int num_irqs;
if (!pcs_soc->irq_enable_mask ||
!pcs_soc->irq_status_mask) {
pcs_soc->irq = -1;
return -EINVAL;
}
INIT_LIST_HEAD(&pcs->irqs);
pcs->chip.name = name;
pcs->chip.irq_ack = pcs_irq_mask;
pcs->chip.irq_mask = pcs_irq_mask;
pcs->chip.irq_unmask = pcs_irq_unmask;
pcs->chip.irq_set_wake = pcs_irq_set_wake;
if (PCS_QUIRK_HAS_SHARED_IRQ) {
int res;
res = request_irq(pcs_soc->irq, pcs_irq_handler,
pinctrl: single: ensure pcs irq will not be forced threaded The PSC IRQ is requested using request_irq() API and as result it can be forced to be threaded IRQ in RT-Kernel if PCS_QUIRK_HAS_SHARED_IRQ is enabled for pinctrl domain. As result, following 'possible irq lock inversion dependency' report can be seen: ========================================================= [ INFO: possible irq lock inversion dependency detected ] 3.14.43-rt42-00360-g96ff499-dirty #24 Not tainted --------------------------------------------------------- irq/369-pinctrl/927 just changed the state of lock: (&pcs->lock){+.....}, at: [<c0375b54>] pcs_irq_handle+0x48/0x9c but this lock was taken by another, HARDIRQ-safe lock in the past: (&irq_desc_lock_class){-.....} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pcs->lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(&pcs->lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/369-pinctrl/927. the shortest dependencies between 2nd lock and 1st lock: -> (&irq_desc_lock_class){-.....} ops: 58724 { IN-HARDIRQ-W at: [<c0090040>] lock_acquire+0x9c/0x158 [<c07065c8>] _raw_spin_lock+0x48/0x58 [<c009edac>] handle_fasteoi_irq+0x24/0x15c [<c009abb0>] generic_handle_irq+0x3c/0x4c [<c000f83c>] handle_IRQ+0x50/0xa0 [<c0008674>] gic_handle_irq+0x3c/0x6c [<c0707a04>] __irq_svc+0x44/0x8c [<c000fc44>] arch_cpu_idle+0x40/0x4c [<c009aadc>] cpu_startup_entry+0x270/0x2e0 [<c06fcbf8>] rest_init+0xd4/0xe4 [<c0a44bfc>] start_kernel+0x3d0/0x3dc [<80008084>] 0x80008084 INITIAL USE at: [<c0090040>] lock_acquire+0x9c/0x158 [<c070674c>] _raw_spin_lock_irqsave+0x54/0x68 [<c009aff8>] __irq_get_desc_lock+0x64/0xa4 [<c009e38c>] irq_set_chip+0x30/0x78 [<c009ec30>] irq_set_chip_and_handler_name+0x24/0x3c [<c036ca10>] gic_irq_domain_map+0x48/0xb4 [<c00a0a80>] irq_domain_associate+0x84/0x1d4 [<c00a1154>] irq_create_mapping+0x80/0x11c [<c00a1270>] irq_create_of_mapping+0x80/0x120 [<c05cdaa8>] irq_of_parse_and_map+0x34/0x3c [<c0a4ea24>] omap_dm_timer_init_one+0x90/0x30c [<c0a4eef0>] omap5_realtime_timer_init+0x8c/0x48c [<c0a486b0>] time_init+0x28/0x38 [<c0a44a6c>] start_kernel+0x240/0x3dc [<80008084>] 0x80008084 } ... key at: [<c1049ce0>] irq_desc_lock_class+0x0/0x8 ... acquired at: [<c07065c8>] _raw_spin_lock+0x48/0x58 [<c0375a90>] pcs_irq_unmask+0x58/0xa0 [<c009ea48>] irq_enable+0x38/0x48 [<c009ead0>] irq_startup+0x78/0x7c [<c009d440>] __setup_irq+0x4a8/0x4f4 [<c009d5dc>] request_threaded_irq+0xb8/0x138 [<c0415a5c>] omap_8250_startup+0x4c/0x148 [<c041276c>] serial8250_startup+0x24/0x30 [<c040d0ec>] uart_startup.part.9+0x5c/0x1b4 [<c040dbcc>] uart_open+0xf4/0x16c [<c03f0540>] tty_open+0x170/0x61c [<c0157028>] chrdev_open+0xbc/0x1b4 [<c0150494>] do_dentry_open+0x1e8/0x2bc [<c0150a84>] finish_open+0x44/0x5c [<c0160d50>] do_last.isra.47+0x710/0xca0 [<c01613a4>] path_openat+0xc4/0x640 [<c0162904>] do_filp_open+0x3c/0x98 [<c0151bdc>] do_sys_open+0x114/0x1d8 [<c0151cc8>] SyS_open+0x28/0x2c [<c0a44d70>] kernel_init_freeable+0x168/0x1e4 [<c06fcc24>] kernel_init+0x1c/0xf8 [<c000eee8>] ret_from_fork+0x14/0x20 -> (&pcs->lock){+.....} ops: 65 { HARDIRQ-ON-W at: [<c0090040>] lock_acquire+0x9c/0x158 [<c07065c8>] _raw_spin_lock+0x48/0x58 [<c0375b54>] pcs_irq_handle+0x48/0x9c [<c0375c5c>] pcs_irq_handler+0x1c/0x28 [<c009c458>] irq_forced_thread_fn+0x30/0x74 [<c009c784>] irq_thread+0x158/0x1c4 [<c0063fc4>] kthread+0xd4/0xe8 [<c000eee8>] ret_from_fork+0x14/0x20 INITIAL USE at: [<c0090040>] lock_acquire+0x9c/0x158 [<c070674c>] _raw_spin_lock_irqsave+0x54/0x68 [<c0375344>] pcs_enable+0x7c/0xe8 [<c0372a44>] pinmux_enable_setting+0x178/0x220 [<c036fecc>] pinctrl_select_state+0x110/0x194 [<c04732dc>] pinctrl_bind_pins+0x7c/0x108 [<c045853c>] driver_probe_device+0x70/0x254 [<c0458810>] __driver_attach+0x9c/0xa0 [<c045674c>] bus_for_each_dev+0x78/0xac [<c0458030>] driver_attach+0x2c/0x30 [<c0457c78>] bus_add_driver+0x15c/0x204 [<c0458ee0>] driver_register+0x88/0x108 [<c045a168>] __platform_driver_register+0x64/0x6c [<c0a8170c>] omap_hsmmc_driver_init+0x1c/0x20 [<c0008a94>] do_one_initcall+0x110/0x170 [<c0a44d48>] kernel_init_freeable+0x140/0x1e4 [<c06fcc24>] kernel_init+0x1c/0xf8 [<c000eee8>] ret_from_fork+0x14/0x20 } ... key at: [<c1088a8c>] __key.18572+0x0/0x8 ... acquired at: [<c008cdd4>] mark_lock+0x388/0x76c [<c008df40>] __lock_acquire+0x6d0/0x1f98 [<c0090040>] lock_acquire+0x9c/0x158 [<c07065c8>] _raw_spin_lock+0x48/0x58 [<c0375b54>] pcs_irq_handle+0x48/0x9c [<c0375c5c>] pcs_irq_handler+0x1c/0x28 [<c009c458>] irq_forced_thread_fn+0x30/0x74 [<c009c784>] irq_thread+0x158/0x1c4 [<c0063fc4>] kthread+0xd4/0xe8 [<c000eee8>] ret_from_fork+0x14/0x20 stack backtrace: CPU: 1 PID: 927 Comm: irq/369-pinctrl Not tainted 3.14.43-rt42-00360-g96ff499-dirty #24 [<c00177e0>] (unwind_backtrace) from [<c00130b0>] (show_stack+0x20/0x24) [<c00130b0>] (show_stack) from [<c0702958>] (dump_stack+0x84/0xd0) [<c0702958>] (dump_stack) from [<c008bcfc>] (print_irq_inversion_bug+0x1d0/0x21c) [<c008bcfc>] (print_irq_inversion_bug) from [<c008bf18>] (check_usage_backwards+0xb4/0x11c) [<c008bf18>] (check_usage_backwards) from [<c008cdd4>] (mark_lock+0x388/0x76c) [<c008cdd4>] (mark_lock) from [<c008df40>] (__lock_acquire+0x6d0/0x1f98) [<c008df40>] (__lock_acquire) from [<c0090040>] (lock_acquire+0x9c/0x158) [<c0090040>] (lock_acquire) from [<c07065c8>] (_raw_spin_lock+0x48/0x58) [<c07065c8>] (_raw_spin_lock) from [<c0375b54>] (pcs_irq_handle+0x48/0x9c) [<c0375b54>] (pcs_irq_handle) from [<c0375c5c>] (pcs_irq_handler+0x1c/0x28) [<c0375c5c>] (pcs_irq_handler) from [<c009c458>] (irq_forced_thread_fn+0x30/0x74) [<c009c458>] (irq_forced_thread_fn) from [<c009c784>] (irq_thread+0x158/0x1c4) [<c009c784>] (irq_thread) from [<c0063fc4>] (kthread+0xd4/0xe8) [<c0063fc4>] (kthread) from [<c000eee8>] (ret_from_fork+0x14/0x20) To fix it use IRQF_NO_THREAD to ensure that pcs irq will not be forced threaded. Cc: Tony Lindgren <tony@atomide.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-06 15:13:37 +00:00
IRQF_SHARED | IRQF_NO_SUSPEND |
IRQF_NO_THREAD,
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
name, pcs_soc);
if (res) {
pcs_soc->irq = -1;
return res;
}
} else {
irq_set_chained_handler_and_data(pcs_soc->irq,
pcs_irq_chain_handler,
pcs_soc);
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
}
/*
* We can use the register offset as the hardirq
* number as irq_domain_add_simple maps them lazily.
* This way we can easily support more than one
* interrupt per function if needed.
*/
num_irqs = pcs->size;
pcs->domain = irq_domain_add_simple(np, num_irqs, 0,
&pcs_irqdomain_ops,
pcs_soc);
if (!pcs->domain) {
irq_set_chained_handler(pcs_soc->irq, NULL);
return -EINVAL;
}
return 0;
}
#ifdef CONFIG_PM
static int pcs_save_context(struct pcs_device *pcs)
{
int i, mux_bytes;
u64 *regsl;
u32 *regsw;
u16 *regshw;
mux_bytes = pcs->width / BITS_PER_BYTE;
if (!pcs->saved_vals) {
pcs->saved_vals = devm_kzalloc(pcs->dev, pcs->size, GFP_ATOMIC);
if (!pcs->saved_vals)
return -ENOMEM;
}
switch (pcs->width) {
case 64:
regsl = pcs->saved_vals;
for (i = 0; i < pcs->size; i += mux_bytes)
*regsl++ = pcs->read(pcs->base + i);
break;
case 32:
regsw = pcs->saved_vals;
for (i = 0; i < pcs->size; i += mux_bytes)
*regsw++ = pcs->read(pcs->base + i);
break;
case 16:
regshw = pcs->saved_vals;
for (i = 0; i < pcs->size; i += mux_bytes)
*regshw++ = pcs->read(pcs->base + i);
break;
}
return 0;
}
static void pcs_restore_context(struct pcs_device *pcs)
{
int i, mux_bytes;
u64 *regsl;
u32 *regsw;
u16 *regshw;
mux_bytes = pcs->width / BITS_PER_BYTE;
switch (pcs->width) {
case 64:
regsl = pcs->saved_vals;
for (i = 0; i < pcs->size; i += mux_bytes)
pcs->write(*regsl++, pcs->base + i);
break;
case 32:
regsw = pcs->saved_vals;
for (i = 0; i < pcs->size; i += mux_bytes)
pcs->write(*regsw++, pcs->base + i);
break;
case 16:
regshw = pcs->saved_vals;
for (i = 0; i < pcs->size; i += mux_bytes)
pcs->write(*regshw++, pcs->base + i);
break;
}
}
static int pinctrl_single_suspend(struct platform_device *pdev,
pm_message_t state)
{
struct pcs_device *pcs;
pcs = platform_get_drvdata(pdev);
if (!pcs)
return -EINVAL;
if (pcs->flags & PCS_CONTEXT_LOSS_OFF) {
int ret;
ret = pcs_save_context(pcs);
if (ret < 0)
return ret;
}
return pinctrl_force_sleep(pcs->pctl);
}
static int pinctrl_single_resume(struct platform_device *pdev)
{
struct pcs_device *pcs;
pcs = platform_get_drvdata(pdev);
if (!pcs)
return -EINVAL;
if (pcs->flags & PCS_CONTEXT_LOSS_OFF)
pcs_restore_context(pcs);
return pinctrl_force_default(pcs->pctl);
}
#endif
/**
* pcs_quirk_missing_pinctrl_cells - handle legacy binding
* @pcs: pinctrl driver instance
* @np: device tree node
* @cells: number of cells
*
* Handle legacy binding with no #pinctrl-cells. This should be
* always two pinctrl-single,bit-per-mux and one for others.
* At some point we may want to consider removing this.
*/
static int pcs_quirk_missing_pinctrl_cells(struct pcs_device *pcs,
struct device_node *np,
int cells)
{
struct property *p;
const char *name = "#pinctrl-cells";
int error;
u32 val;
error = of_property_read_u32(np, name, &val);
if (!error)
return 0;
dev_warn(pcs->dev, "please update dts to use %s = <%i>\n",
name, cells);
p = devm_kzalloc(pcs->dev, sizeof(*p), GFP_KERNEL);
if (!p)
return -ENOMEM;
p->length = sizeof(__be32);
p->value = devm_kzalloc(pcs->dev, sizeof(__be32), GFP_KERNEL);
if (!p->value)
return -ENOMEM;
*(__be32 *)p->value = cpu_to_be32(cells);
p->name = devm_kstrdup(pcs->dev, name, GFP_KERNEL);
if (!p->name)
return -ENOMEM;
pcs->missing_nr_pinctrl_cells = p;
#if IS_BUILTIN(CONFIG_PINCTRL_SINGLE)
error = of_add_property(np, pcs->missing_nr_pinctrl_cells);
#endif
return error;
}
static int pcs_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct pcs_pdata *pdata;
struct resource *res;
struct pcs_device *pcs;
const struct pcs_soc_data *soc;
int ret;
soc = of_device_get_match_data(&pdev->dev);
if (WARN_ON(!soc))
return -EINVAL;
pcs = devm_kzalloc(&pdev->dev, sizeof(*pcs), GFP_KERNEL);
if (!pcs)
return -ENOMEM;
pcs->dev = &pdev->dev;
pcs->np = np;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
raw_spin_lock_init(&pcs->lock);
mutex_init(&pcs->mutex);
INIT_LIST_HEAD(&pcs->gpiofuncs);
pcs->flags = soc->flags;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
memcpy(&pcs->socdata, soc, sizeof(*soc));
ret = of_property_read_u32(np, "pinctrl-single,register-width",
&pcs->width);
if (ret) {
dev_err(pcs->dev, "register width not specified\n");
return ret;
}
ret = of_property_read_u32(np, "pinctrl-single,function-mask",
&pcs->fmask);
if (!ret) {
pcs->fshift = __ffs(pcs->fmask);
pcs->fmax = pcs->fmask >> pcs->fshift;
} else {
/* If mask property doesn't exist, function mux is invalid. */
pcs->fmask = 0;
pcs->fshift = 0;
pcs->fmax = 0;
}
ret = of_property_read_u32(np, "pinctrl-single,function-off",
&pcs->foff);
if (ret)
pcs->foff = PCS_OFF_DISABLED;
pcs->bits_per_mux = of_property_read_bool(np,
"pinctrl-single,bit-per-mux");
ret = pcs_quirk_missing_pinctrl_cells(pcs, np,
pcs->bits_per_mux ? 2 : 1);
if (ret) {
dev_err(&pdev->dev, "unable to patch #pinctrl-cells\n");
return ret;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(pcs->dev, "could not get resource\n");
return -ENODEV;
}
pcs->res = devm_request_mem_region(pcs->dev, res->start,
resource_size(res), DRIVER_NAME);
if (!pcs->res) {
dev_err(pcs->dev, "could not get mem_region\n");
return -EBUSY;
}
pcs->size = resource_size(pcs->res);
pcs->base = devm_ioremap(pcs->dev, pcs->res->start, pcs->size);
if (!pcs->base) {
dev_err(pcs->dev, "could not ioremap\n");
return -ENODEV;
}
platform_set_drvdata(pdev, pcs);
switch (pcs->width) {
case 8:
pcs->read = pcs_readb;
pcs->write = pcs_writeb;
break;
case 16:
pcs->read = pcs_readw;
pcs->write = pcs_writew;
break;
case 32:
pcs->read = pcs_readl;
pcs->write = pcs_writel;
break;
default:
break;
}
pcs->desc.name = DRIVER_NAME;
pcs->desc.pctlops = &pcs_pinctrl_ops;
pcs->desc.pmxops = &pcs_pinmux_ops;
if (PCS_HAS_PINCONF)
pcs->desc.confops = &pcs_pinconf_ops;
pcs->desc.owner = THIS_MODULE;
ret = pcs_allocate_pin_table(pcs);
if (ret < 0)
goto free;
pinctrl: core: Fix regression caused by delayed work for hogs Commit df61b366af26 ("pinctrl: core: Use delayed work for hogs") caused a regression at least with sh-pfc that is also a GPIO controller as noted by Geert Uytterhoeven <geert@linux-m68k.org>. As the original pinctrl_register() has issues calling pin controller driver functions early before the controller has finished registering, we can't just revert commit df61b366af26. That would break the drivers using GENERIC_PINCTRL_GROUPS or GENERIC_PINMUX_FUNCTIONS. So let's fix the issue with the following steps as a single patch: 1. Revert the late_init parts of commit df61b366af26. The late_init clearly won't work and we have to just give up on fixing pinctrl_register() for GENERIC_PINCTRL_GROUPS and GENERIC_PINMUX_FUNCTIONS. 2. Split pinctrl_register() into two parts By splitting pinctrl_register() into pinctrl_init_controller() and pinctrl_create_and_start() we have better control over when it's safe to call pinctrl_create(). 3. Introduce a new pinctrl_register_and_init() function As suggested by Linus Walleij <linus.walleij@linaro.org>, we can just introduce a new function for the controllers that need pinctrl_create() called later. 4. Convert the four known problem cases to use new function Let's convert pinctrl-imx, pinctrl-single, sh-pfc and ti-iodelay to use the new function to fix the issues. The rest of the drivers can be converted later. Let's also update Documentation/pinctrl.txt accordingly because of the known issues with pinctrl_register(). Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11 22:13:34 +00:00
ret = pinctrl_register_and_init(&pcs->desc, pcs->dev, pcs, &pcs->pctl);
if (ret) {
dev_err(pcs->dev, "could not register single pinctrl driver\n");
goto free;
}
ret = pcs_add_gpio_func(np, pcs);
if (ret < 0)
goto free;
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
pcs->socdata.irq = irq_of_parse_and_map(np, 0);
if (pcs->socdata.irq)
pcs->flags |= PCS_FEAT_IRQ;
/* We still need auxdata for some omaps for PRM interrupts */
pdata = dev_get_platdata(&pdev->dev);
if (pdata) {
if (pdata->rearm)
pcs->socdata.rearm = pdata->rearm;
if (pdata->irq) {
pcs->socdata.irq = pdata->irq;
pcs->flags |= PCS_FEAT_IRQ;
}
}
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
if (PCS_HAS_IRQ) {
ret = pcs_irq_init_chained_handler(pcs, np);
if (ret < 0)
dev_warn(pcs->dev, "initialized with no interrupts\n");
}
dev_info(pcs->dev, "%i pins, size %u\n", pcs->desc.npins, pcs->size);
return pinctrl_enable(pcs->pctl);
free:
pcs_free_resources(pcs);
return ret;
}
static int pcs_remove(struct platform_device *pdev)
{
struct pcs_device *pcs = platform_get_drvdata(pdev);
if (!pcs)
return 0;
pcs_free_resources(pcs);
return 0;
}
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
static const struct pcs_soc_data pinctrl_single_omap_wkup = {
.flags = PCS_QUIRK_SHARED_IRQ,
.irq_enable_mask = (1 << 14), /* OMAP_WAKEUP_EN */
.irq_status_mask = (1 << 15), /* OMAP_WAKEUP_EVENT */
};
static const struct pcs_soc_data pinctrl_single_dra7 = {
.irq_enable_mask = (1 << 24), /* WAKEUPENABLE */
.irq_status_mask = (1 << 25), /* WAKEUPEVENT */
};
static const struct pcs_soc_data pinctrl_single_am437x = {
.flags = PCS_QUIRK_SHARED_IRQ | PCS_CONTEXT_LOSS_OFF,
.irq_enable_mask = (1 << 29), /* OMAP_WAKEUP_EN */
.irq_status_mask = (1 << 30), /* OMAP_WAKEUP_EVENT */
};
static const struct pcs_soc_data pinctrl_single = {
};
static const struct pcs_soc_data pinconf_single = {
.flags = PCS_FEAT_PINCONF,
};
static const struct of_device_id pcs_of_match[] = {
pinctrl: single: Add support for wake-up interrupts The pin control registers can have interrupts for example for device wake-up. These interrupts can be treated as a chained interrupt controller as suggested earlier by Linus Walleij <linus.walleij@linaro.org>. This patch adds support for interrupts in a way that should be pretty generic, and works for the omaps that support wake-up interrupts. On omaps, there's an interrupt enable and interrupt status bit for each pin. The two pinctrl domains on omaps share a single interrupt from the PRM chained interrupt handler. Support for other similar hardware should be easy to add. Note that this patch does not attempt to handle the wake-up interrupts automatically unlike the earlier patches. This patch allows the device drivers to do a request_irq() on the wake-up pins as needed. I'll try to do also a separate generic patch for handling the wake-up events automatically. Also note that as this patch makes the pinctrl-single an irq controller, the current bindings need some extra trickery to use interrupts from two different interrupt controllers for the same driver. So it might be worth waiting a little on the patches enabling the wake-up interrupts from drivers as there should be a generic way to handle it coming. And also there's been discussion of interrupts-extended binding for using interrupts from multiple interrupt controllers. In any case, this patch should be ready to go allowing handling the wake-up interrupts in a generic way, or separately from the device drivers. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Prakash Manjunathappa <prakash.pm@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-kernel@vger.kernel.org Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-03 04:39:40 +00:00
{ .compatible = "ti,omap3-padconf", .data = &pinctrl_single_omap_wkup },
{ .compatible = "ti,omap4-padconf", .data = &pinctrl_single_omap_wkup },
{ .compatible = "ti,omap5-padconf", .data = &pinctrl_single_omap_wkup },
{ .compatible = "ti,dra7-padconf", .data = &pinctrl_single_dra7 },
{ .compatible = "ti,am437-padconf", .data = &pinctrl_single_am437x },
{ .compatible = "pinctrl-single", .data = &pinctrl_single },
{ .compatible = "pinconf-single", .data = &pinconf_single },
{ },
};
MODULE_DEVICE_TABLE(of, pcs_of_match);
static struct platform_driver pcs_driver = {
.probe = pcs_probe,
.remove = pcs_remove,
.driver = {
.name = DRIVER_NAME,
.of_match_table = pcs_of_match,
},
#ifdef CONFIG_PM
.suspend = pinctrl_single_suspend,
.resume = pinctrl_single_resume,
#endif
};
module_platform_driver(pcs_driver);
MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
MODULE_DESCRIPTION("One-register-per-pin type device tree based pinctrl driver");
MODULE_LICENSE("GPL v2");