linux/drivers/clk/bcm/Kconfig

config CLK_BCM_63XX
	bool "Broadcom BCM63xx clock support"
	depends on ARCH_BCM_63XX || COMPILE_TEST
	depends on COMMON_CLK
	select COMMON_CLK_IPROC
	default ARCH_BCM_63XX
	help
	  Enable common clock framework support for Broadcom BCM63xx DSL SoCs
	  based on the ARM architecture

config CLK_BCM_KONA
	bool "Broadcom Kona CCU clock support"
	depends on ARCH_BCM_MOBILE || COMPILE_TEST
	depends on COMMON_CLK
	default y
	help
	  Enable common clock framework support for Broadcom SoCs
	  using "Kona" style clock control units, including those
	  in the BCM281xx and BCM21664 families.

config COMMON_CLK_IPROC
	bool
	depends on COMMON_CLK
	help
	  Enable common clock framework support for Broadcom SoCs
	  based on the iProc architecture
clk: bcm: Add BCM63138 clock support BCM63138 has a simple clocking domain which is primarily the ARMPLL clocking complex, from which the ARM (CPU), APB and AXI clocks would be derived from. Since the ARMPLL controller is entirely compatible with the iProc ARM PLL, we just initialize it without additional parameters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 2015-10-30 01:23:18 +00:00			`config CLK_BCM_63XX`
			`bool "Broadcom BCM63xx clock support"`
			`depends on ARCH_BCM_63XX \|\| COMPILE_TEST`
			`depends on COMMON_CLK`
			`select COMMON_CLK_IPROC`
			`default ARCH_BCM_63XX`
			`help`
			`Enable common clock framework support for Broadcom BCM63xx DSL SoCs`
			`based on the ARM architecture`

clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org> 2014-02-14 18:29:18 +00:00			`config CLK_BCM_KONA`
			`bool "Broadcom Kona CCU clock support"`
clk: Allow drivers to build if COMPILE_TEST is enabled These drivers only have runtime but no build time dependencies so can be built for testing purposes if the Kconfig COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that drivers are not affected by changes that could cause build regressions. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 2015-10-13 14:18:18 +00:00			`depends on ARCH_BCM_MOBILE \|\| COMPILE_TEST`
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org> 2014-02-14 18:29:18 +00:00			`depends on COMMON_CLK`
			`default y`
			`help`
			`Enable common clock framework support for Broadcom SoCs`
			`using "Kona" style clock control units, including those`
clk: bcm21664: use common clock framework Define the set of CCUs and provided clocks sufficient to satisfy the needs of all the existing clock references for BCM21664. Replace the "fake" fixed-rate clocks used previously with "real" ones. Note that only the minimal set of these clocks and CCUs is defined here. More clock definitions will need to be added as required by the addition of additional drivers. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2014-04-21 21:26:26 +00:00			`in the BCM281xx and BCM21664 families.`
clk: iproc: add initial common clock support This adds basic and generic support for various iProc PLLs and clocks including the ARMPLL, GENPLL, LCPLL, MIPIPLL, and ASIU clocks. SoCs under the iProc architecture can define their specific register offsets and clock parameters for their PLL and clock controllers. These parameters can be passed as arugments into the generic iProc PLL and clock setup functions Derived from code originally provided by Jonathan Richardson <jonathar@broadcom.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> 2015-05-05 18:13:19 +00:00
			`config COMMON_CLK_IPROC`
ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled When CONFIG_CYGNUS is set but CONFIG_COMMON_CLK_IPROC is disabled, the following link failures are caused: drivers/built-in.o: In function `cygnus_armpll_init': :(.init.text+0x1d290): undefined reference to `iproc_armpll_setup' drivers/built-in.o: In function `cygnus_genpll_clk_init': :(.init.text+0x1d2c4): undefined reference to `iproc_pll_clk_setup' drivers/built-in.o: In function `cygnus_lcpll0_clk_init': :(.init.text+0x1d304): undefined reference to `iproc_pll_clk_setup' drivers/built-in.o: In function `cygnus_mipipll_clk_init': :(.init.text+0x1d344): undefined reference to `iproc_pll_clk_setup' drivers/built-in.o: In function `cygnus_asiu_init': :(.init.text+0x1d370): undefined reference to `iproc_asiu_setup' It is fixed it by always selecting COMMON_CLK_IPROC from ARCH_BCM_IPROC, and making COMMON_CLK_IPROC a silent option (thus preventing it from being erroneously disabled by a user). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> 2015-10-15 19:48:24 +00:00			`bool`
clk: iproc: add initial common clock support This adds basic and generic support for various iProc PLLs and clocks including the ARMPLL, GENPLL, LCPLL, MIPIPLL, and ASIU clocks. SoCs under the iProc architecture can define their specific register offsets and clock parameters for their PLL and clock controllers. These parameters can be passed as arugments into the generic iProc PLL and clock setup functions Derived from code originally provided by Jonathan Richardson <jonathar@broadcom.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> 2015-05-05 18:13:19 +00:00			`depends on COMMON_CLK`
			`help`
			`Enable common clock framework support for Broadcom SoCs`
			`based on the iProc architecture`