linux/drivers/gpu/drm/i915/intel_vdsc.c

967 lines
32 KiB
C
Raw Normal View History

drm/i915/dsc: Define & Compute VESA DSC params This patches does the following: 1. This patch defines all the DSC parameters as per the VESA DSC specification. These are stored in the encoder and used to compute the PPS parameters to be sent to the Sink. 2. Compute all the DSC parameters which are derived from DSC state of intel_crtc_state. 3. Compute all parameters that are VESA DSC specific This computation happens in the atomic check phase during compute_config() to validate if display stream compression can be enabled for the requested mode. v8 (From Manasi): * DEBUG_KMS instead of DRM_ERROR for user triggerable errors (Ville) v7: (From Manasi) * Dont use signed int for rc_range_params (Manasi) * Mask the range_bpg_offset to use only 6 bits * Add SPDX identifier (Chris Wilson) v6 (From Manasi): * Add a check for line_buf_depth return value (Anusha) * Remove DRM DSC constants to different patch (Manasi) v5 (From Manasi): * Add logic to limit the max line buf depth for DSC 1.1 to 13 as per DSC 1.1 spec * Fix dim checkpatch warnings/checks v4 (From Gaurav): * Rebase on latest drm tip * rename variable name(Manasi) * Populate linebuf_depth variable(Manasi) v3 (From Gaurav): * Rebase my previous patches on top of Manasi's latest patch series * Using >>n rather than /2^n (Manasi) * Change the commit message to explain what the patch is doing(Gaurav) Fixed review comments from Ville: * Don't use macro TWOS_COMPLEMENT * Mention in comment about the source of RC params * Return directly from case statements * Using single asssignment for assigning rc_range_params * Using <<n rather than *2^n and removing the comments about the fixed point numbers v2 (From Manasi): * Update logic for minor version to consider the dpcd value and what supported by the HW platform * Use DRM DSC config struct instead of intel_dp struct * Move the DSC constants to DRM DSC header file * Use u16, u8 where bigger data types not needed * * Compute the DSC parameters as part of DSC compute config since the computation can fail (Manasi) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Co-developed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181129193827.7914-1-manasi.d.navare@intel.com
2018-11-29 19:38:27 +00:00
// SPDX-License-Identifier: MIT
/*
* Copyright © 2018 Intel Corporation
*
* Author: Gaurav K Singh <gaurav.k.singh@intel.com>
* Manasi Navare <manasi.d.navare@intel.com>
*/
#include <drm/i915_drm.h>
drm/i915/dsc: Define & Compute VESA DSC params This patches does the following: 1. This patch defines all the DSC parameters as per the VESA DSC specification. These are stored in the encoder and used to compute the PPS parameters to be sent to the Sink. 2. Compute all the DSC parameters which are derived from DSC state of intel_crtc_state. 3. Compute all parameters that are VESA DSC specific This computation happens in the atomic check phase during compute_config() to validate if display stream compression can be enabled for the requested mode. v8 (From Manasi): * DEBUG_KMS instead of DRM_ERROR for user triggerable errors (Ville) v7: (From Manasi) * Dont use signed int for rc_range_params (Manasi) * Mask the range_bpg_offset to use only 6 bits * Add SPDX identifier (Chris Wilson) v6 (From Manasi): * Add a check for line_buf_depth return value (Anusha) * Remove DRM DSC constants to different patch (Manasi) v5 (From Manasi): * Add logic to limit the max line buf depth for DSC 1.1 to 13 as per DSC 1.1 spec * Fix dim checkpatch warnings/checks v4 (From Gaurav): * Rebase on latest drm tip * rename variable name(Manasi) * Populate linebuf_depth variable(Manasi) v3 (From Gaurav): * Rebase my previous patches on top of Manasi's latest patch series * Using >>n rather than /2^n (Manasi) * Change the commit message to explain what the patch is doing(Gaurav) Fixed review comments from Ville: * Don't use macro TWOS_COMPLEMENT * Mention in comment about the source of RC params * Return directly from case statements * Using single asssignment for assigning rc_range_params * Using <<n rather than *2^n and removing the comments about the fixed point numbers v2 (From Manasi): * Update logic for minor version to consider the dpcd value and what supported by the HW platform * Use DRM DSC config struct instead of intel_dp struct * Move the DSC constants to DRM DSC header file * Use u16, u8 where bigger data types not needed * * Compute the DSC parameters as part of DSC compute config since the computation can fail (Manasi) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Co-developed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181129193827.7914-1-manasi.d.navare@intel.com
2018-11-29 19:38:27 +00:00
#include "i915_drv.h"
#include "intel_drv.h"
#include "intel_vdsc.h"
drm/i915/dsc: Define & Compute VESA DSC params This patches does the following: 1. This patch defines all the DSC parameters as per the VESA DSC specification. These are stored in the encoder and used to compute the PPS parameters to be sent to the Sink. 2. Compute all the DSC parameters which are derived from DSC state of intel_crtc_state. 3. Compute all parameters that are VESA DSC specific This computation happens in the atomic check phase during compute_config() to validate if display stream compression can be enabled for the requested mode. v8 (From Manasi): * DEBUG_KMS instead of DRM_ERROR for user triggerable errors (Ville) v7: (From Manasi) * Dont use signed int for rc_range_params (Manasi) * Mask the range_bpg_offset to use only 6 bits * Add SPDX identifier (Chris Wilson) v6 (From Manasi): * Add a check for line_buf_depth return value (Anusha) * Remove DRM DSC constants to different patch (Manasi) v5 (From Manasi): * Add logic to limit the max line buf depth for DSC 1.1 to 13 as per DSC 1.1 spec * Fix dim checkpatch warnings/checks v4 (From Gaurav): * Rebase on latest drm tip * rename variable name(Manasi) * Populate linebuf_depth variable(Manasi) v3 (From Gaurav): * Rebase my previous patches on top of Manasi's latest patch series * Using >>n rather than /2^n (Manasi) * Change the commit message to explain what the patch is doing(Gaurav) Fixed review comments from Ville: * Don't use macro TWOS_COMPLEMENT * Mention in comment about the source of RC params * Return directly from case statements * Using single asssignment for assigning rc_range_params * Using <<n rather than *2^n and removing the comments about the fixed point numbers v2 (From Manasi): * Update logic for minor version to consider the dpcd value and what supported by the HW platform * Use DRM DSC config struct instead of intel_dp struct * Move the DSC constants to DRM DSC header file * Use u16, u8 where bigger data types not needed * * Compute the DSC parameters as part of DSC compute config since the computation can fail (Manasi) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Co-developed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181129193827.7914-1-manasi.d.navare@intel.com
2018-11-29 19:38:27 +00:00
enum ROW_INDEX_BPP {
ROW_INDEX_6BPP = 0,
ROW_INDEX_8BPP,
ROW_INDEX_10BPP,
ROW_INDEX_12BPP,
ROW_INDEX_15BPP,
MAX_ROW_INDEX
};
enum COLUMN_INDEX_BPC {
COLUMN_INDEX_8BPC = 0,
COLUMN_INDEX_10BPC,
COLUMN_INDEX_12BPC,
COLUMN_INDEX_14BPC,
COLUMN_INDEX_16BPC,
MAX_COLUMN_INDEX
};
#define DSC_SUPPORTED_VERSION_MIN 1
/* From DSC_v1.11 spec, rc_parameter_Set syntax element typically constant */
static u16 rc_buf_thresh[] = {
896, 1792, 2688, 3584, 4480, 5376, 6272, 6720, 7168, 7616,
7744, 7872, 8000, 8064
};
struct rc_parameters {
u16 initial_xmit_delay;
u8 first_line_bpg_offset;
u16 initial_offset;
u8 flatness_min_qp;
u8 flatness_max_qp;
u8 rc_quant_incr_limit0;
u8 rc_quant_incr_limit1;
struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
};
/*
* Selected Rate Control Related Parameter Recommended Values
* from DSC_v1.11 spec & C Model release: DSC_model_20161212
*/
static struct rc_parameters rc_params[][MAX_COLUMN_INDEX] = {
{
/* 6BPP/8BPC */
{ 768, 15, 6144, 3, 13, 11, 11, {
{ 0, 4, 0 }, { 1, 6, -2 }, { 3, 8, -2 }, { 4, 8, -4 },
{ 5, 9, -6 }, { 5, 9, -6 }, { 6, 9, -6 }, { 6, 10, -8 },
{ 7, 11, -8 }, { 8, 12, -10 }, { 9, 12, -10 }, { 10, 12, -12 },
{ 10, 12, -12 }, { 11, 12, -12 }, { 13, 14, -12 }
}
},
/* 6BPP/10BPC */
{ 768, 15, 6144, 7, 17, 15, 15, {
{ 0, 8, 0 }, { 3, 10, -2 }, { 7, 12, -2 }, { 8, 12, -4 },
{ 9, 13, -6 }, { 9, 13, -6 }, { 10, 13, -6 }, { 10, 14, -8 },
{ 11, 15, -8 }, { 12, 16, -10 }, { 13, 16, -10 },
{ 14, 16, -12 }, { 14, 16, -12 }, { 15, 16, -12 },
{ 17, 18, -12 }
}
},
/* 6BPP/12BPC */
{ 768, 15, 6144, 11, 21, 19, 19, {
{ 0, 12, 0 }, { 5, 14, -2 }, { 11, 16, -2 }, { 12, 16, -4 },
{ 13, 17, -6 }, { 13, 17, -6 }, { 14, 17, -6 }, { 14, 18, -8 },
{ 15, 19, -8 }, { 16, 20, -10 }, { 17, 20, -10 },
{ 18, 20, -12 }, { 18, 20, -12 }, { 19, 20, -12 },
{ 21, 22, -12 }
}
},
/* 6BPP/14BPC */
{ 768, 15, 6144, 15, 25, 23, 27, {
{ 0, 16, 0 }, { 7, 18, -2 }, { 15, 20, -2 }, { 16, 20, -4 },
{ 17, 21, -6 }, { 17, 21, -6 }, { 18, 21, -6 }, { 18, 22, -8 },
{ 19, 23, -8 }, { 20, 24, -10 }, { 21, 24, -10 },
{ 22, 24, -12 }, { 22, 24, -12 }, { 23, 24, -12 },
{ 25, 26, -12 }
}
},
/* 6BPP/16BPC */
{ 768, 15, 6144, 19, 29, 27, 27, {
{ 0, 20, 0 }, { 9, 22, -2 }, { 19, 24, -2 }, { 20, 24, -4 },
{ 21, 25, -6 }, { 21, 25, -6 }, { 22, 25, -6 }, { 22, 26, -8 },
{ 23, 27, -8 }, { 24, 28, -10 }, { 25, 28, -10 },
{ 26, 28, -12 }, { 26, 28, -12 }, { 27, 28, -12 },
{ 29, 30, -12 }
}
},
},
{
/* 8BPP/8BPC */
{ 512, 12, 6144, 3, 12, 11, 11, {
{ 0, 4, 2 }, { 0, 4, 0 }, { 1, 5, 0 }, { 1, 6, -2 },
{ 3, 7, -4 }, { 3, 7, -6 }, { 3, 7, -8 }, { 3, 8, -8 },
{ 3, 9, -8 }, { 3, 10, -10 }, { 5, 11, -10 }, { 5, 12, -12 },
{ 5, 13, -12 }, { 7, 13, -12 }, { 13, 15, -12 }
}
},
/* 8BPP/10BPC */
{ 512, 12, 6144, 7, 16, 15, 15, {
{ 0, 4, 2 }, { 4, 8, 0 }, { 5, 9, 0 }, { 5, 10, -2 },
{ 7, 11, -4 }, { 7, 11, -6 }, { 7, 11, -8 }, { 7, 12, -8 },
{ 7, 13, -8 }, { 7, 14, -10 }, { 9, 15, -10 }, { 9, 16, -12 },
{ 9, 17, -12 }, { 11, 17, -12 }, { 17, 19, -12 }
}
},
/* 8BPP/12BPC */
{ 512, 12, 6144, 11, 20, 19, 19, {
{ 0, 12, 2 }, { 4, 12, 0 }, { 9, 13, 0 }, { 9, 14, -2 },
{ 11, 15, -4 }, { 11, 15, -6 }, { 11, 15, -8 }, { 11, 16, -8 },
{ 11, 17, -8 }, { 11, 18, -10 }, { 13, 19, -10 },
{ 13, 20, -12 }, { 13, 21, -12 }, { 15, 21, -12 },
{ 21, 23, -12 }
}
},
/* 8BPP/14BPC */
{ 512, 12, 6144, 15, 24, 23, 23, {
{ 0, 12, 0 }, { 5, 13, 0 }, { 11, 15, 0 }, { 12, 17, -2 },
{ 15, 19, -4 }, { 15, 19, -6 }, { 15, 19, -8 }, { 15, 20, -8 },
{ 15, 21, -8 }, { 15, 22, -10 }, { 17, 22, -10 },
{ 17, 23, -12 }, { 17, 23, -12 }, { 21, 24, -12 },
{ 24, 25, -12 }
}
},
/* 8BPP/16BPC */
{ 512, 12, 6144, 19, 28, 27, 27, {
{ 0, 12, 2 }, { 6, 14, 0 }, { 13, 17, 0 }, { 15, 20, -2 },
{ 19, 23, -4 }, { 19, 23, -6 }, { 19, 23, -8 }, { 19, 24, -8 },
{ 19, 25, -8 }, { 19, 26, -10 }, { 21, 26, -10 },
{ 21, 27, -12 }, { 21, 27, -12 }, { 25, 28, -12 },
{ 28, 29, -12 }
}
},
},
{
/* 10BPP/8BPC */
{ 410, 15, 5632, 3, 12, 11, 11, {
{ 0, 3, 2 }, { 0, 4, 0 }, { 1, 5, 0 }, { 2, 6, -2 },
{ 3, 7, -4 }, { 3, 7, -6 }, { 3, 7, -8 }, { 3, 8, -8 },
{ 3, 9, -8 }, { 3, 9, -10 }, { 5, 10, -10 }, { 5, 10, -10 },
{ 5, 11, -12 }, { 7, 11, -12 }, { 11, 12, -12 }
}
},
/* 10BPP/10BPC */
{ 410, 15, 5632, 7, 16, 15, 15, {
{ 0, 7, 2 }, { 4, 8, 0 }, { 5, 9, 0 }, { 6, 10, -2 },
{ 7, 11, -4 }, { 7, 11, -6 }, { 7, 11, -8 }, { 7, 12, -8 },
{ 7, 13, -8 }, { 7, 13, -10 }, { 9, 14, -10 }, { 9, 14, -10 },
{ 9, 15, -12 }, { 11, 15, -12 }, { 15, 16, -12 }
}
},
/* 10BPP/12BPC */
{ 410, 15, 5632, 11, 20, 19, 19, {
{ 0, 11, 2 }, { 4, 12, 0 }, { 9, 13, 0 }, { 10, 14, -2 },
{ 11, 15, -4 }, { 11, 15, -6 }, { 11, 15, -8 }, { 11, 16, -8 },
{ 11, 17, -8 }, { 11, 17, -10 }, { 13, 18, -10 },
{ 13, 18, -10 }, { 13, 19, -12 }, { 15, 19, -12 },
{ 19, 20, -12 }
}
},
/* 10BPP/14BPC */
{ 410, 15, 5632, 15, 24, 23, 23, {
{ 0, 11, 2 }, { 5, 13, 0 }, { 11, 15, 0 }, { 13, 18, -2 },
{ 15, 19, -4 }, { 15, 19, -6 }, { 15, 19, -8 }, { 15, 20, -8 },
{ 15, 21, -8 }, { 15, 21, -10 }, { 17, 22, -10 },
{ 17, 22, -10 }, { 17, 23, -12 }, { 19, 23, -12 },
{ 23, 24, -12 }
}
},
/* 10BPP/16BPC */
{ 410, 15, 5632, 19, 28, 27, 27, {
{ 0, 11, 2 }, { 6, 14, 0 }, { 13, 17, 0 }, { 16, 20, -2 },
{ 19, 23, -4 }, { 19, 23, -6 }, { 19, 23, -8 }, { 19, 24, -8 },
{ 19, 25, -8 }, { 19, 25, -10 }, { 21, 26, -10 },
{ 21, 26, -10 }, { 21, 27, -12 }, { 23, 27, -12 },
{ 27, 28, -12 }
}
},
},
{
/* 12BPP/8BPC */
{ 341, 15, 2048, 3, 12, 11, 11, {
{ 0, 2, 2 }, { 0, 4, 0 }, { 1, 5, 0 }, { 1, 6, -2 },
{ 3, 7, -4 }, { 3, 7, -6 }, { 3, 7, -8 }, { 3, 8, -8 },
{ 3, 9, -8 }, { 3, 10, -10 }, { 5, 11, -10 },
{ 5, 12, -12 }, { 5, 13, -12 }, { 7, 13, -12 }, { 13, 15, -12 }
}
},
/* 12BPP/10BPC */
{ 341, 15, 2048, 7, 16, 15, 15, {
{ 0, 2, 2 }, { 2, 5, 0 }, { 3, 7, 0 }, { 4, 8, -2 },
{ 6, 9, -4 }, { 7, 10, -6 }, { 7, 11, -8 }, { 7, 12, -8 },
{ 7, 13, -8 }, { 7, 14, -10 }, { 9, 15, -10 }, { 9, 16, -12 },
{ 9, 17, -12 }, { 11, 17, -12 }, { 17, 19, -12 }
}
},
/* 12BPP/12BPC */
{ 341, 15, 2048, 11, 20, 19, 19, {
{ 0, 6, 2 }, { 4, 9, 0 }, { 7, 11, 0 }, { 8, 12, -2 },
{ 10, 13, -4 }, { 11, 14, -6 }, { 11, 15, -8 }, { 11, 16, -8 },
{ 11, 17, -8 }, { 11, 18, -10 }, { 13, 19, -10 },
{ 13, 20, -12 }, { 13, 21, -12 }, { 15, 21, -12 },
{ 21, 23, -12 }
}
},
/* 12BPP/14BPC */
{ 341, 15, 2048, 15, 24, 23, 23, {
{ 0, 6, 2 }, { 7, 10, 0 }, { 9, 13, 0 }, { 11, 16, -2 },
{ 14, 17, -4 }, { 15, 18, -6 }, { 15, 19, -8 }, { 15, 20, -8 },
{ 15, 20, -8 }, { 15, 21, -10 }, { 17, 21, -10 },
{ 17, 21, -12 }, { 17, 21, -12 }, { 19, 22, -12 },
{ 22, 23, -12 }
}
},
/* 12BPP/16BPC */
{ 341, 15, 2048, 19, 28, 27, 27, {
{ 0, 6, 2 }, { 6, 11, 0 }, { 11, 15, 0 }, { 14, 18, -2 },
{ 18, 21, -4 }, { 19, 22, -6 }, { 19, 23, -8 }, { 19, 24, -8 },
{ 19, 24, -8 }, { 19, 25, -10 }, { 21, 25, -10 },
{ 21, 25, -12 }, { 21, 25, -12 }, { 23, 26, -12 },
{ 26, 27, -12 }
}
},
},
{
/* 15BPP/8BPC */
{ 273, 15, 2048, 3, 12, 11, 11, {
{ 0, 0, 10 }, { 0, 1, 8 }, { 0, 1, 6 }, { 0, 2, 4 },
{ 1, 2, 2 }, { 1, 3, 0 }, { 1, 3, -2 }, { 2, 4, -4 },
{ 2, 5, -6 }, { 3, 5, -8 }, { 4, 6, -10 }, { 4, 7, -10 },
{ 5, 7, -12 }, { 7, 8, -12 }, { 8, 9, -12 }
}
},
/* 15BPP/10BPC */
{ 273, 15, 2048, 7, 16, 15, 15, {
{ 0, 2, 10 }, { 2, 5, 8 }, { 3, 5, 6 }, { 4, 6, 4 },
{ 5, 6, 2 }, { 5, 7, 0 }, { 5, 7, -2 }, { 6, 8, -4 },
{ 6, 9, -6 }, { 7, 9, -8 }, { 8, 10, -10 }, { 8, 11, -10 },
{ 9, 11, -12 }, { 11, 12, -12 }, { 12, 13, -12 }
}
},
/* 15BPP/12BPC */
{ 273, 15, 2048, 11, 20, 19, 19, {
{ 0, 4, 10 }, { 2, 7, 8 }, { 4, 9, 6 }, { 6, 11, 4 },
{ 9, 11, 2 }, { 9, 11, 0 }, { 9, 12, -2 }, { 10, 12, -4 },
{ 11, 13, -6 }, { 11, 13, -8 }, { 12, 14, -10 },
{ 13, 15, -10 }, { 13, 15, -12 }, { 15, 16, -12 },
{ 16, 17, -12 }
}
},
/* 15BPP/14BPC */
{ 273, 15, 2048, 15, 24, 23, 23, {
{ 0, 4, 10 }, { 3, 8, 8 }, { 6, 11, 6 }, { 9, 14, 4 },
{ 13, 15, 2 }, { 13, 15, 0 }, { 13, 16, -2 }, { 14, 16, -4 },
{ 15, 17, -6 }, { 15, 17, -8 }, { 16, 18, -10 },
{ 17, 19, -10 }, { 17, 19, -12 }, { 19, 20, -12 },
{ 20, 21, -12 }
}
},
/* 15BPP/16BPC */
{ 273, 15, 2048, 19, 28, 27, 27, {
{ 0, 4, 10 }, { 4, 9, 8 }, { 8, 13, 6 }, { 12, 17, 4 },
{ 17, 19, 2 }, { 17, 20, 0 }, { 17, 20, -2 }, { 18, 20, -4 },
{ 19, 21, -6 }, { 19, 21, -8 }, { 20, 22, -10 },
{ 21, 23, -10 }, { 21, 23, -12 }, { 23, 24, -12 },
{ 24, 25, -12 }
}
}
}
};
static int get_row_index_for_rc_params(u16 compressed_bpp)
{
switch (compressed_bpp) {
case 6:
return ROW_INDEX_6BPP;
case 8:
return ROW_INDEX_8BPP;
case 10:
return ROW_INDEX_10BPP;
case 12:
return ROW_INDEX_12BPP;
case 15:
return ROW_INDEX_15BPP;
default:
return -EINVAL;
}
}
static int get_column_index_for_rc_params(u8 bits_per_component)
{
switch (bits_per_component) {
case 8:
return COLUMN_INDEX_8BPC;
case 10:
return COLUMN_INDEX_10BPC;
case 12:
return COLUMN_INDEX_12BPC;
case 14:
return COLUMN_INDEX_14BPC;
case 16:
return COLUMN_INDEX_16BPC;
default:
return -EINVAL;
}
}
int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
struct intel_crtc_state *pipe_config)
{
struct drm_dsc_config *vdsc_cfg = &pipe_config->dp_dsc_cfg;
u16 compressed_bpp = pipe_config->dsc_params.compressed_bpp;
u8 i = 0;
int row_index = 0;
int column_index = 0;
u8 line_buf_depth = 0;
vdsc_cfg->pic_width = pipe_config->base.adjusted_mode.crtc_hdisplay;
vdsc_cfg->pic_height = pipe_config->base.adjusted_mode.crtc_vdisplay;
vdsc_cfg->slice_width = DIV_ROUND_UP(vdsc_cfg->pic_width,
pipe_config->dsc_params.slice_count);
/*
* Slice Height of 8 works for all currently available panels. So start
* with that if pic_height is an integral multiple of 8.
* Eventually add logic to try multiple slice heights.
*/
if (vdsc_cfg->pic_height % 8 == 0)
vdsc_cfg->slice_height = 8;
else if (vdsc_cfg->pic_height % 4 == 0)
vdsc_cfg->slice_height = 4;
else
vdsc_cfg->slice_height = 2;
/* Values filled from DSC Sink DPCD */
vdsc_cfg->dsc_version_major =
(intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] &
DP_DSC_MAJOR_MASK) >> DP_DSC_MAJOR_SHIFT;
vdsc_cfg->dsc_version_minor =
min(DSC_SUPPORTED_VERSION_MIN,
(intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] &
DP_DSC_MINOR_MASK) >> DP_DSC_MINOR_SHIFT);
vdsc_cfg->convert_rgb = intel_dp->dsc_dpcd[DP_DSC_DEC_COLOR_FORMAT_CAP - DP_DSC_SUPPORT] &
DP_DSC_RGB;
line_buf_depth = drm_dp_dsc_sink_line_buf_depth(intel_dp->dsc_dpcd);
if (!line_buf_depth) {
DRM_DEBUG_KMS("DSC Sink Line Buffer Depth invalid\n");
return -EINVAL;
}
if (vdsc_cfg->dsc_version_minor == 2)
vdsc_cfg->line_buf_depth = (line_buf_depth == DSC_1_2_MAX_LINEBUF_DEPTH_BITS) ?
DSC_1_2_MAX_LINEBUF_DEPTH_VAL : line_buf_depth;
else
vdsc_cfg->line_buf_depth = (line_buf_depth > DSC_1_1_MAX_LINEBUF_DEPTH_BITS) ?
DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth;
/* Gen 11 does not support YCbCr */
vdsc_cfg->simple_422 = false;
drm/i915/dsc: Define & Compute VESA DSC params This patches does the following: 1. This patch defines all the DSC parameters as per the VESA DSC specification. These are stored in the encoder and used to compute the PPS parameters to be sent to the Sink. 2. Compute all the DSC parameters which are derived from DSC state of intel_crtc_state. 3. Compute all parameters that are VESA DSC specific This computation happens in the atomic check phase during compute_config() to validate if display stream compression can be enabled for the requested mode. v8 (From Manasi): * DEBUG_KMS instead of DRM_ERROR for user triggerable errors (Ville) v7: (From Manasi) * Dont use signed int for rc_range_params (Manasi) * Mask the range_bpg_offset to use only 6 bits * Add SPDX identifier (Chris Wilson) v6 (From Manasi): * Add a check for line_buf_depth return value (Anusha) * Remove DRM DSC constants to different patch (Manasi) v5 (From Manasi): * Add logic to limit the max line buf depth for DSC 1.1 to 13 as per DSC 1.1 spec * Fix dim checkpatch warnings/checks v4 (From Gaurav): * Rebase on latest drm tip * rename variable name(Manasi) * Populate linebuf_depth variable(Manasi) v3 (From Gaurav): * Rebase my previous patches on top of Manasi's latest patch series * Using >>n rather than /2^n (Manasi) * Change the commit message to explain what the patch is doing(Gaurav) Fixed review comments from Ville: * Don't use macro TWOS_COMPLEMENT * Mention in comment about the source of RC params * Return directly from case statements * Using single asssignment for assigning rc_range_params * Using <<n rather than *2^n and removing the comments about the fixed point numbers v2 (From Manasi): * Update logic for minor version to consider the dpcd value and what supported by the HW platform * Use DRM DSC config struct instead of intel_dp struct * Move the DSC constants to DRM DSC header file * Use u16, u8 where bigger data types not needed * * Compute the DSC parameters as part of DSC compute config since the computation can fail (Manasi) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Co-developed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181129193827.7914-1-manasi.d.navare@intel.com
2018-11-29 19:38:27 +00:00
/* Gen 11 does not support VBR */
vdsc_cfg->vbr_enable = false;
vdsc_cfg->block_pred_enable =
intel_dp->dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] &
DP_DSC_BLK_PREDICTION_IS_SUPPORTED;
/* Gen 11 only supports integral values of bpp */
vdsc_cfg->bits_per_pixel = compressed_bpp << 4;
vdsc_cfg->bits_per_component = pipe_config->pipe_bpp / 3;
for (i = 0; i < DSC_NUM_BUF_RANGES - 1; i++) {
/*
* six 0s are appended to the lsb of each threshold value
* internally in h/w.
* Only 8 bits are allowed for programming RcBufThreshold
*/
vdsc_cfg->rc_buf_thresh[i] = rc_buf_thresh[i] >> 6;
}
/*
* For 6bpp, RC Buffer threshold 12 and 13 need a different value
* as per C Model
*/
if (compressed_bpp == 6) {
vdsc_cfg->rc_buf_thresh[12] = 0x7C;
vdsc_cfg->rc_buf_thresh[13] = 0x7D;
}
row_index = get_row_index_for_rc_params(compressed_bpp);
column_index =
get_column_index_for_rc_params(vdsc_cfg->bits_per_component);
if (row_index < 0 || column_index < 0)
return -EINVAL;
vdsc_cfg->first_line_bpg_offset =
rc_params[row_index][column_index].first_line_bpg_offset;
vdsc_cfg->initial_xmit_delay =
rc_params[row_index][column_index].initial_xmit_delay;
vdsc_cfg->initial_offset =
rc_params[row_index][column_index].initial_offset;
vdsc_cfg->flatness_min_qp =
rc_params[row_index][column_index].flatness_min_qp;
vdsc_cfg->flatness_max_qp =
rc_params[row_index][column_index].flatness_max_qp;
vdsc_cfg->rc_quant_incr_limit0 =
rc_params[row_index][column_index].rc_quant_incr_limit0;
vdsc_cfg->rc_quant_incr_limit1 =
rc_params[row_index][column_index].rc_quant_incr_limit1;
for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
vdsc_cfg->rc_range_params[i].range_min_qp =
rc_params[row_index][column_index].rc_range_params[i].range_min_qp;
vdsc_cfg->rc_range_params[i].range_max_qp =
rc_params[row_index][column_index].rc_range_params[i].range_max_qp;
/*
* Range BPG Offset uses 2's complement and is only a 6 bits. So
* mask it to get only 6 bits.
*/
vdsc_cfg->rc_range_params[i].range_bpg_offset =
rc_params[row_index][column_index].rc_range_params[i].range_bpg_offset &
DSC_RANGE_BPG_OFFSET_MASK;
}
/*
* BitsPerComponent value determines mux_word_size:
* When BitsPerComponent is 12bpc, muxWordSize will be equal to 64 bits
* When BitsPerComponent is 8 or 10bpc, muxWordSize will be equal to
* 48 bits
*/
if (vdsc_cfg->bits_per_component == 8 ||
vdsc_cfg->bits_per_component == 10)
vdsc_cfg->mux_word_size = DSC_MUX_WORD_SIZE_8_10_BPC;
else if (vdsc_cfg->bits_per_component == 12)
vdsc_cfg->mux_word_size = DSC_MUX_WORD_SIZE_12_BPC;
/* RC_MODEL_SIZE is a constant across all configurations */
vdsc_cfg->rc_model_size = DSC_RC_MODEL_SIZE_CONST;
/* InitialScaleValue is a 6 bit value with 3 fractional bits (U3.3) */
vdsc_cfg->initial_scale_value = (vdsc_cfg->rc_model_size << 3) /
(vdsc_cfg->rc_model_size - vdsc_cfg->initial_offset);
return drm_dsc_compute_rc_parameters(vdsc_cfg);
drm/i915/dsc: Define & Compute VESA DSC params This patches does the following: 1. This patch defines all the DSC parameters as per the VESA DSC specification. These are stored in the encoder and used to compute the PPS parameters to be sent to the Sink. 2. Compute all the DSC parameters which are derived from DSC state of intel_crtc_state. 3. Compute all parameters that are VESA DSC specific This computation happens in the atomic check phase during compute_config() to validate if display stream compression can be enabled for the requested mode. v8 (From Manasi): * DEBUG_KMS instead of DRM_ERROR for user triggerable errors (Ville) v7: (From Manasi) * Dont use signed int for rc_range_params (Manasi) * Mask the range_bpg_offset to use only 6 bits * Add SPDX identifier (Chris Wilson) v6 (From Manasi): * Add a check for line_buf_depth return value (Anusha) * Remove DRM DSC constants to different patch (Manasi) v5 (From Manasi): * Add logic to limit the max line buf depth for DSC 1.1 to 13 as per DSC 1.1 spec * Fix dim checkpatch warnings/checks v4 (From Gaurav): * Rebase on latest drm tip * rename variable name(Manasi) * Populate linebuf_depth variable(Manasi) v3 (From Gaurav): * Rebase my previous patches on top of Manasi's latest patch series * Using >>n rather than /2^n (Manasi) * Change the commit message to explain what the patch is doing(Gaurav) Fixed review comments from Ville: * Don't use macro TWOS_COMPLEMENT * Mention in comment about the source of RC params * Return directly from case statements * Using single asssignment for assigning rc_range_params * Using <<n rather than *2^n and removing the comments about the fixed point numbers v2 (From Manasi): * Update logic for minor version to consider the dpcd value and what supported by the HW platform * Use DRM DSC config struct instead of intel_dp struct * Move the DSC constants to DRM DSC header file * Use u16, u8 where bigger data types not needed * * Compute the DSC parameters as part of DSC compute config since the computation can fail (Manasi) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Co-developed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181129193827.7914-1-manasi.d.navare@intel.com
2018-11-29 19:38:27 +00:00
}
enum intel_display_power_domain
intel_dsc_power_domain(const struct intel_crtc_state *crtc_state)
{
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
/*
* On ICL VDSC/joining for eDP transcoder uses a separate power well PW2
* This requires POWER_DOMAIN_TRANSCODER_EDP_VDSC power domain.
* For any other transcoder, VDSC/joining uses the power well associated
* with the pipe/transcoder in use. Hence another reference on the
* transcoder power domain will suffice.
*/
if (cpu_transcoder == TRANSCODER_EDP)
return POWER_DOMAIN_TRANSCODER_EDP_VDSC;
else
return POWER_DOMAIN_TRANSCODER(cpu_transcoder);
}
static void intel_configure_pps_for_dsc_encoder(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
const struct drm_dsc_config *vdsc_cfg = &crtc_state->dp_dsc_cfg;
enum pipe pipe = crtc->pipe;
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
u32 pps_val = 0;
u32 rc_buf_thresh_dword[4];
u32 rc_range_params_dword[8];
u8 num_vdsc_instances = (crtc_state->dsc_params.dsc_split) ? 2 : 1;
int i = 0;
/* Populate PICTURE_PARAMETER_SET_0 registers */
pps_val = DSC_VER_MAJ | vdsc_cfg->dsc_version_minor <<
DSC_VER_MIN_SHIFT |
vdsc_cfg->bits_per_component << DSC_BPC_SHIFT |
vdsc_cfg->line_buf_depth << DSC_LINE_BUF_DEPTH_SHIFT;
if (vdsc_cfg->block_pred_enable)
pps_val |= DSC_BLOCK_PREDICTION;
if (vdsc_cfg->convert_rgb)
pps_val |= DSC_COLOR_SPACE_CONVERSION;
if (vdsc_cfg->simple_422)
pps_val |= DSC_422_ENABLE;
if (vdsc_cfg->vbr_enable)
pps_val |= DSC_VBR_ENABLE;
DRM_INFO("PPS0 = 0x%08x\n", pps_val);
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_0, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_0, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_0(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_0(pipe),
pps_val);
}
/* Populate PICTURE_PARAMETER_SET_1 registers */
pps_val = 0;
pps_val |= DSC_BPP(vdsc_cfg->bits_per_pixel);
DRM_INFO("PPS1 = 0x%08x\n", pps_val);
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_1, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_1, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_1(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_1(pipe),
pps_val);
}
/* Populate PICTURE_PARAMETER_SET_2 registers */
pps_val = 0;
pps_val |= DSC_PIC_HEIGHT(vdsc_cfg->pic_height) |
DSC_PIC_WIDTH(vdsc_cfg->pic_width / num_vdsc_instances);
DRM_INFO("PPS2 = 0x%08x\n", pps_val);
if (encoder->type == INTEL_OUTPUT_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_2, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_2, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_2(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_2(pipe),
pps_val);
}
/* Populate PICTURE_PARAMETER_SET_3 registers */
pps_val = 0;
pps_val |= DSC_SLICE_HEIGHT(vdsc_cfg->slice_height) |
DSC_SLICE_WIDTH(vdsc_cfg->slice_width);
DRM_INFO("PPS3 = 0x%08x\n", pps_val);
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_3, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_3, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_3(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_3(pipe),
pps_val);
}
/* Populate PICTURE_PARAMETER_SET_4 registers */
pps_val = 0;
pps_val |= DSC_INITIAL_XMIT_DELAY(vdsc_cfg->initial_xmit_delay) |
DSC_INITIAL_DEC_DELAY(vdsc_cfg->initial_dec_delay);
DRM_INFO("PPS4 = 0x%08x\n", pps_val);
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_4, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_4, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_4(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_4(pipe),
pps_val);
}
/* Populate PICTURE_PARAMETER_SET_5 registers */
pps_val = 0;
pps_val |= DSC_SCALE_INC_INT(vdsc_cfg->scale_increment_interval) |
DSC_SCALE_DEC_INT(vdsc_cfg->scale_decrement_interval);
DRM_INFO("PPS5 = 0x%08x\n", pps_val);
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_5, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_5, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_5(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_5(pipe),
pps_val);
}
/* Populate PICTURE_PARAMETER_SET_6 registers */
pps_val = 0;
pps_val |= DSC_INITIAL_SCALE_VALUE(vdsc_cfg->initial_scale_value) |
DSC_FIRST_LINE_BPG_OFFSET(vdsc_cfg->first_line_bpg_offset) |
DSC_FLATNESS_MIN_QP(vdsc_cfg->flatness_min_qp) |
DSC_FLATNESS_MAX_QP(vdsc_cfg->flatness_max_qp);
DRM_INFO("PPS6 = 0x%08x\n", pps_val);
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_6, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_6, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_6(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_6(pipe),
pps_val);
}
/* Populate PICTURE_PARAMETER_SET_7 registers */
pps_val = 0;
pps_val |= DSC_SLICE_BPG_OFFSET(vdsc_cfg->slice_bpg_offset) |
DSC_NFL_BPG_OFFSET(vdsc_cfg->nfl_bpg_offset);
DRM_INFO("PPS7 = 0x%08x\n", pps_val);
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_7, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_7, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_7(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_7(pipe),
pps_val);
}
/* Populate PICTURE_PARAMETER_SET_8 registers */
pps_val = 0;
pps_val |= DSC_FINAL_OFFSET(vdsc_cfg->final_offset) |
DSC_INITIAL_OFFSET(vdsc_cfg->initial_offset);
DRM_INFO("PPS8 = 0x%08x\n", pps_val);
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_8, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_8, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_8(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_8(pipe),
pps_val);
}
/* Populate PICTURE_PARAMETER_SET_9 registers */
pps_val = 0;
pps_val |= DSC_RC_MODEL_SIZE(DSC_RC_MODEL_SIZE_CONST) |
DSC_RC_EDGE_FACTOR(DSC_RC_EDGE_FACTOR_CONST);
DRM_INFO("PPS9 = 0x%08x\n", pps_val);
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_9, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_9, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_9(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_9(pipe),
pps_val);
}
/* Populate PICTURE_PARAMETER_SET_10 registers */
pps_val = 0;
pps_val |= DSC_RC_QUANT_INC_LIMIT0(vdsc_cfg->rc_quant_incr_limit0) |
DSC_RC_QUANT_INC_LIMIT1(vdsc_cfg->rc_quant_incr_limit1) |
DSC_RC_TARGET_OFF_HIGH(DSC_RC_TGT_OFFSET_HI_CONST) |
DSC_RC_TARGET_OFF_LOW(DSC_RC_TGT_OFFSET_LO_CONST);
DRM_INFO("PPS10 = 0x%08x\n", pps_val);
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_10, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_10, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_10(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_10(pipe),
pps_val);
}
/* Populate Picture parameter set 16 */
pps_val = 0;
pps_val |= DSC_SLICE_CHUNK_SIZE(vdsc_cfg->slice_chunk_size) |
DSC_SLICE_PER_LINE((vdsc_cfg->pic_width / num_vdsc_instances) /
vdsc_cfg->slice_width) |
DSC_SLICE_ROW_PER_FRAME(vdsc_cfg->pic_height /
vdsc_cfg->slice_height);
DRM_INFO("PPS16 = 0x%08x\n", pps_val);
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_PICTURE_PARAMETER_SET_16, pps_val);
/*
* If 2 VDSC instances are needed, configure PPS for second
* VDSC
*/
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(DSCC_PICTURE_PARAMETER_SET_16, pps_val);
} else {
I915_WRITE(ICL_DSC0_PICTURE_PARAMETER_SET_16(pipe), pps_val);
if (crtc_state->dsc_params.dsc_split)
I915_WRITE(ICL_DSC1_PICTURE_PARAMETER_SET_16(pipe),
pps_val);
}
/* Populate the RC_BUF_THRESH registers */
memset(rc_buf_thresh_dword, 0, sizeof(rc_buf_thresh_dword));
for (i = 0; i < DSC_NUM_BUF_RANGES - 1; i++) {
rc_buf_thresh_dword[i / 4] |=
(u32)(vdsc_cfg->rc_buf_thresh[i] <<
BITS_PER_BYTE * (i % 4));
DRM_INFO(" RC_BUF_THRESH%d = 0x%08x\n", i,
rc_buf_thresh_dword[i / 4]);
}
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_RC_BUF_THRESH_0, rc_buf_thresh_dword[0]);
I915_WRITE(DSCA_RC_BUF_THRESH_0_UDW, rc_buf_thresh_dword[1]);
I915_WRITE(DSCA_RC_BUF_THRESH_1, rc_buf_thresh_dword[2]);
I915_WRITE(DSCA_RC_BUF_THRESH_1_UDW, rc_buf_thresh_dword[3]);
if (crtc_state->dsc_params.dsc_split) {
I915_WRITE(DSCC_RC_BUF_THRESH_0,
rc_buf_thresh_dword[0]);
I915_WRITE(DSCC_RC_BUF_THRESH_0_UDW,
rc_buf_thresh_dword[1]);
I915_WRITE(DSCC_RC_BUF_THRESH_1,
rc_buf_thresh_dword[2]);
I915_WRITE(DSCC_RC_BUF_THRESH_1_UDW,
rc_buf_thresh_dword[3]);
}
} else {
I915_WRITE(ICL_DSC0_RC_BUF_THRESH_0(pipe),
rc_buf_thresh_dword[0]);
I915_WRITE(ICL_DSC0_RC_BUF_THRESH_0_UDW(pipe),
rc_buf_thresh_dword[1]);
I915_WRITE(ICL_DSC0_RC_BUF_THRESH_1(pipe),
rc_buf_thresh_dword[2]);
I915_WRITE(ICL_DSC0_RC_BUF_THRESH_1_UDW(pipe),
rc_buf_thresh_dword[3]);
if (crtc_state->dsc_params.dsc_split) {
I915_WRITE(ICL_DSC1_RC_BUF_THRESH_0(pipe),
rc_buf_thresh_dword[0]);
I915_WRITE(ICL_DSC1_RC_BUF_THRESH_0_UDW(pipe),
rc_buf_thresh_dword[1]);
I915_WRITE(ICL_DSC1_RC_BUF_THRESH_1(pipe),
rc_buf_thresh_dword[2]);
I915_WRITE(ICL_DSC1_RC_BUF_THRESH_1_UDW(pipe),
rc_buf_thresh_dword[3]);
}
}
/* Populate the RC_RANGE_PARAMETERS registers */
memset(rc_range_params_dword, 0, sizeof(rc_range_params_dword));
for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
rc_range_params_dword[i / 2] |=
(u32)(((vdsc_cfg->rc_range_params[i].range_bpg_offset <<
RC_BPG_OFFSET_SHIFT) |
(vdsc_cfg->rc_range_params[i].range_max_qp <<
RC_MAX_QP_SHIFT) |
(vdsc_cfg->rc_range_params[i].range_min_qp <<
RC_MIN_QP_SHIFT)) << 16 * (i % 2));
DRM_INFO(" RC_RANGE_PARAM_%d = 0x%08x\n", i,
rc_range_params_dword[i / 2]);
}
if (cpu_transcoder == TRANSCODER_EDP) {
I915_WRITE(DSCA_RC_RANGE_PARAMETERS_0,
rc_range_params_dword[0]);
I915_WRITE(DSCA_RC_RANGE_PARAMETERS_0_UDW,
rc_range_params_dword[1]);
I915_WRITE(DSCA_RC_RANGE_PARAMETERS_1,
rc_range_params_dword[2]);
I915_WRITE(DSCA_RC_RANGE_PARAMETERS_1_UDW,
rc_range_params_dword[3]);
I915_WRITE(DSCA_RC_RANGE_PARAMETERS_2,
rc_range_params_dword[4]);
I915_WRITE(DSCA_RC_RANGE_PARAMETERS_2_UDW,
rc_range_params_dword[5]);
I915_WRITE(DSCA_RC_RANGE_PARAMETERS_3,
rc_range_params_dword[6]);
I915_WRITE(DSCA_RC_RANGE_PARAMETERS_3_UDW,
rc_range_params_dword[7]);
if (crtc_state->dsc_params.dsc_split) {
I915_WRITE(DSCC_RC_RANGE_PARAMETERS_0,
rc_range_params_dword[0]);
I915_WRITE(DSCC_RC_RANGE_PARAMETERS_0_UDW,
rc_range_params_dword[1]);
I915_WRITE(DSCC_RC_RANGE_PARAMETERS_1,
rc_range_params_dword[2]);
I915_WRITE(DSCC_RC_RANGE_PARAMETERS_1_UDW,
rc_range_params_dword[3]);
I915_WRITE(DSCC_RC_RANGE_PARAMETERS_2,
rc_range_params_dword[4]);
I915_WRITE(DSCC_RC_RANGE_PARAMETERS_2_UDW,
rc_range_params_dword[5]);
I915_WRITE(DSCC_RC_RANGE_PARAMETERS_3,
rc_range_params_dword[6]);
I915_WRITE(DSCC_RC_RANGE_PARAMETERS_3_UDW,
rc_range_params_dword[7]);
}
} else {
I915_WRITE(ICL_DSC0_RC_RANGE_PARAMETERS_0(pipe),
rc_range_params_dword[0]);
I915_WRITE(ICL_DSC0_RC_RANGE_PARAMETERS_0_UDW(pipe),
rc_range_params_dword[1]);
I915_WRITE(ICL_DSC0_RC_RANGE_PARAMETERS_1(pipe),
rc_range_params_dword[2]);
I915_WRITE(ICL_DSC0_RC_RANGE_PARAMETERS_1_UDW(pipe),
rc_range_params_dword[3]);
I915_WRITE(ICL_DSC0_RC_RANGE_PARAMETERS_2(pipe),
rc_range_params_dword[4]);
I915_WRITE(ICL_DSC0_RC_RANGE_PARAMETERS_2_UDW(pipe),
rc_range_params_dword[5]);
I915_WRITE(ICL_DSC0_RC_RANGE_PARAMETERS_3(pipe),
rc_range_params_dword[6]);
I915_WRITE(ICL_DSC0_RC_RANGE_PARAMETERS_3_UDW(pipe),
rc_range_params_dword[7]);
if (crtc_state->dsc_params.dsc_split) {
I915_WRITE(ICL_DSC1_RC_RANGE_PARAMETERS_0(pipe),
rc_range_params_dword[0]);
I915_WRITE(ICL_DSC1_RC_RANGE_PARAMETERS_0_UDW(pipe),
rc_range_params_dword[1]);
I915_WRITE(ICL_DSC1_RC_RANGE_PARAMETERS_1(pipe),
rc_range_params_dword[2]);
I915_WRITE(ICL_DSC1_RC_RANGE_PARAMETERS_1_UDW(pipe),
rc_range_params_dword[3]);
I915_WRITE(ICL_DSC1_RC_RANGE_PARAMETERS_2(pipe),
rc_range_params_dword[4]);
I915_WRITE(ICL_DSC1_RC_RANGE_PARAMETERS_2_UDW(pipe),
rc_range_params_dword[5]);
I915_WRITE(ICL_DSC1_RC_RANGE_PARAMETERS_3(pipe),
rc_range_params_dword[6]);
I915_WRITE(ICL_DSC1_RC_RANGE_PARAMETERS_3_UDW(pipe),
rc_range_params_dword[7]);
}
}
}
static void intel_dp_write_dsc_pps_sdp(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
const struct drm_dsc_config *vdsc_cfg = &crtc_state->dp_dsc_cfg;
struct drm_dsc_pps_infoframe dp_dsc_pps_sdp;
/* Prepare DP SDP PPS header as per DP 1.4 spec, Table 2-123 */
drm_dsc_dp_pps_header_init(&dp_dsc_pps_sdp.pps_header);
/* Fill the PPS payload bytes as per DSC spec 1.2 Table 4-1 */
drm_dsc_pps_payload_pack(&dp_dsc_pps_sdp.pps_payload, vdsc_cfg);
intel_dig_port->write_infoframe(encoder, crtc_state,
DP_SDP_PPS, &dp_dsc_pps_sdp,
sizeof(dp_dsc_pps_sdp));
}
void intel_dsc_enable(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum pipe pipe = crtc->pipe;
i915_reg_t dss_ctl1_reg, dss_ctl2_reg;
u32 dss_ctl1_val = 0;
u32 dss_ctl2_val = 0;
if (!crtc_state->dsc_params.compression_enable)
return;
/* Enable Power wells for VDSC/joining */
intel_display_power_get(dev_priv,
intel_dsc_power_domain(crtc_state));
intel_configure_pps_for_dsc_encoder(encoder, crtc_state);
intel_dp_write_dsc_pps_sdp(encoder, crtc_state);
if (crtc_state->cpu_transcoder == TRANSCODER_EDP) {
dss_ctl1_reg = DSS_CTL1;
dss_ctl2_reg = DSS_CTL2;
} else {
dss_ctl1_reg = ICL_PIPE_DSS_CTL1(pipe);
dss_ctl2_reg = ICL_PIPE_DSS_CTL2(pipe);
}
dss_ctl2_val |= LEFT_BRANCH_VDSC_ENABLE;
if (crtc_state->dsc_params.dsc_split) {
dss_ctl2_val |= RIGHT_BRANCH_VDSC_ENABLE;
dss_ctl1_val |= JOINER_ENABLE;
}
I915_WRITE(dss_ctl1_reg, dss_ctl1_val);
I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
}
void intel_dsc_disable(const struct intel_crtc_state *old_crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum pipe pipe = crtc->pipe;
i915_reg_t dss_ctl1_reg, dss_ctl2_reg;
u32 dss_ctl1_val = 0, dss_ctl2_val = 0;
if (!old_crtc_state->dsc_params.compression_enable)
return;
if (old_crtc_state->cpu_transcoder == TRANSCODER_EDP) {
dss_ctl1_reg = DSS_CTL1;
dss_ctl2_reg = DSS_CTL2;
} else {
dss_ctl1_reg = ICL_PIPE_DSS_CTL1(pipe);
dss_ctl2_reg = ICL_PIPE_DSS_CTL2(pipe);
}
dss_ctl1_val = I915_READ(dss_ctl1_reg);
if (dss_ctl1_val & JOINER_ENABLE)
dss_ctl1_val &= ~JOINER_ENABLE;
I915_WRITE(dss_ctl1_reg, dss_ctl1_val);
dss_ctl2_val = I915_READ(dss_ctl2_reg);
if (dss_ctl2_val & LEFT_BRANCH_VDSC_ENABLE ||
dss_ctl2_val & RIGHT_BRANCH_VDSC_ENABLE)
dss_ctl2_val &= ~(LEFT_BRANCH_VDSC_ENABLE |
RIGHT_BRANCH_VDSC_ENABLE);
I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
/* Disable Power wells for VDSC/joining */
intel_display_power_put_unchecked(dev_priv,
intel_dsc_power_domain(old_crtc_state));
}