linux/drivers/xen/xenbus/xenbus.h

140 lines
4.2 KiB
C
Raw Normal View History

/*
* Private include for xenbus communications.
*
* Copyright (C) 2005 Rusty Russell, IBM Corporation
* Copyright (C) 2005 XenSource Ltd.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation; or, when distributed
* separately from the Linux kernel or incorporated into other
* software packages, subject to the following license:
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this source file (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy, modify,
* merge, publish, distribute, sublicense, and/or sell copies of the Software,
* and to permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#ifndef _XENBUS_XENBUS_H
#define _XENBUS_XENBUS_H
xen: optimize xenbus driver for multiple concurrent xenstore accesses Handling of multiple concurrent Xenstore accesses through xenbus driver either from the kernel or user land is rather lame today: xenbus is capable to have one access active only at one point of time. Rewrite xenbus to handle multiple requests concurrently by making use of the request id of the Xenstore protocol. This requires to: - Instead of blocking inside xb_read() when trying to read data from the xenstore ring buffer do so only in the main loop of xenbus_thread(). - Instead of doing writes to the xenstore ring buffer in the context of the caller just queue the request and do the write in the dedicated xenbus thread. - Instead of just forwarding the request id specified by the caller of xenbus to xenstore use a xenbus internal unique request id. This will allow multiple outstanding requests. - Modify the locking scheme in order to allow multiple requests being active in parallel. - Instead of waiting for the reply of a user's xenstore request after writing the request to the xenstore ring buffer return directly to the caller and do the waiting in the read path. Additionally signal handling was optimized by avoiding waking up the xenbus thread or sending an event to Xenstore in case the addressed entity is known to be running already. As a result communication with Xenstore is sped up by a factor of up to 5: depending on the request type (read or write) and the amount of data transferred the gain was at least 20% (small reads) and went up to a factor of 5 for large writes. In the end some more rough edges of xenbus have been smoothed: - Handling of memory shortage when reading from xenstore ring buffer in the xenbus driver was not optimal: it was busy looping and issuing a warning in each loop. - In case of xenstore not running in dom0 but in a stubdom we end up with two xenbus threads running as the initialization of xenbus in dom0 expecting a local xenstored will be redone later when connecting to the xenstore domain. Up to now this was no problem as locking would prevent the two xenbus threads interfering with each other, but this was just a waste of kernel resources. - An out of memory situation while writing to or reading from the xenstore ring buffer no longer will lead to a possible loss of synchronization with xenstore. - The user read and write part are now interruptible by signals. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-02-09 13:39:58 +00:00
#include <linux/mutex.h>
#include <linux/uio.h>
#include <xen/xenbus.h>
#define XEN_BUS_ID_SIZE 20
struct xen_bus_type {
char *root;
unsigned int levels;
int (*get_bus_id)(char bus_id[XEN_BUS_ID_SIZE], const char *nodename);
int (*probe)(struct xen_bus_type *bus, const char *type,
const char *dir);
bool (*otherend_will_handle)(struct xenbus_watch *watch,
const char *path, const char *token);
void (*otherend_changed)(struct xenbus_watch *watch, const char *path,
const char *token);
struct bus_type bus;
};
enum xenstore_init {
XS_UNKNOWN,
XS_PV,
XS_HVM,
XS_LOCAL,
};
xen: optimize xenbus driver for multiple concurrent xenstore accesses Handling of multiple concurrent Xenstore accesses through xenbus driver either from the kernel or user land is rather lame today: xenbus is capable to have one access active only at one point of time. Rewrite xenbus to handle multiple requests concurrently by making use of the request id of the Xenstore protocol. This requires to: - Instead of blocking inside xb_read() when trying to read data from the xenstore ring buffer do so only in the main loop of xenbus_thread(). - Instead of doing writes to the xenstore ring buffer in the context of the caller just queue the request and do the write in the dedicated xenbus thread. - Instead of just forwarding the request id specified by the caller of xenbus to xenstore use a xenbus internal unique request id. This will allow multiple outstanding requests. - Modify the locking scheme in order to allow multiple requests being active in parallel. - Instead of waiting for the reply of a user's xenstore request after writing the request to the xenstore ring buffer return directly to the caller and do the waiting in the read path. Additionally signal handling was optimized by avoiding waking up the xenbus thread or sending an event to Xenstore in case the addressed entity is known to be running already. As a result communication with Xenstore is sped up by a factor of up to 5: depending on the request type (read or write) and the amount of data transferred the gain was at least 20% (small reads) and went up to a factor of 5 for large writes. In the end some more rough edges of xenbus have been smoothed: - Handling of memory shortage when reading from xenstore ring buffer in the xenbus driver was not optimal: it was busy looping and issuing a warning in each loop. - In case of xenstore not running in dom0 but in a stubdom we end up with two xenbus threads running as the initialization of xenbus in dom0 expecting a local xenstored will be redone later when connecting to the xenstore domain. Up to now this was no problem as locking would prevent the two xenbus threads interfering with each other, but this was just a waste of kernel resources. - An out of memory situation while writing to or reading from the xenstore ring buffer no longer will lead to a possible loss of synchronization with xenstore. - The user read and write part are now interruptible by signals. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-02-09 13:39:58 +00:00
struct xs_watch_event {
struct list_head list;
unsigned int len;
struct xenbus_watch *handle;
const char *path;
const char *token;
char body[];
};
enum xb_req_state {
xb_req_state_queued,
xb_req_state_wait_reply,
xb_req_state_got_reply,
xb_req_state_aborted
};
struct xb_req_data {
struct list_head list;
wait_queue_head_t wq;
struct xsd_sockmsg msg;
xenbus: track caller request id Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") optimized xenbus concurrent accesses but in doing so broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in charge of xenbus message exchange with the correct header and body. Now, after the mentioned commit the replies received by application will no longer have the header req_id echoed back as it was on request (see specification below for reference), because that particular field is being overwritten by kernel. struct xsd_sockmsg { uint32_t type; /* XS_??? */ uint32_t req_id;/* Request identifier, echoed in daemon's response. */ uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */ uint32_t len; /* Length of data following this. */ /* Generally followed by nul-terminated string(s). */ }; Before there was only one request at a time so req_id could simply be forwarded back and forth. To allow simultaneous requests we need a different req_id for each message thus kernel keeps a monotonic increasing counter for this field and is written on every request irrespective of userspace value. Forwarding again the req_id on userspace requests is not a solution because we would open the possibility of userspace-generated req_id colliding with kernel ones. So this patch instead takes another route which is to artificially keep user req_id while keeping the xenbus logic as is. We do that by saving the original req_id before xs_send(), use the private kernel counter as req_id and then once reply comes and was validated, we restore back the original req_id. Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Reported-by: Bhavesh Davda <bhavesh.davda@oracle.com> Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-02-02 17:42:33 +00:00
uint32_t caller_req_id;
xen: optimize xenbus driver for multiple concurrent xenstore accesses Handling of multiple concurrent Xenstore accesses through xenbus driver either from the kernel or user land is rather lame today: xenbus is capable to have one access active only at one point of time. Rewrite xenbus to handle multiple requests concurrently by making use of the request id of the Xenstore protocol. This requires to: - Instead of blocking inside xb_read() when trying to read data from the xenstore ring buffer do so only in the main loop of xenbus_thread(). - Instead of doing writes to the xenstore ring buffer in the context of the caller just queue the request and do the write in the dedicated xenbus thread. - Instead of just forwarding the request id specified by the caller of xenbus to xenstore use a xenbus internal unique request id. This will allow multiple outstanding requests. - Modify the locking scheme in order to allow multiple requests being active in parallel. - Instead of waiting for the reply of a user's xenstore request after writing the request to the xenstore ring buffer return directly to the caller and do the waiting in the read path. Additionally signal handling was optimized by avoiding waking up the xenbus thread or sending an event to Xenstore in case the addressed entity is known to be running already. As a result communication with Xenstore is sped up by a factor of up to 5: depending on the request type (read or write) and the amount of data transferred the gain was at least 20% (small reads) and went up to a factor of 5 for large writes. In the end some more rough edges of xenbus have been smoothed: - Handling of memory shortage when reading from xenstore ring buffer in the xenbus driver was not optimal: it was busy looping and issuing a warning in each loop. - In case of xenstore not running in dom0 but in a stubdom we end up with two xenbus threads running as the initialization of xenbus in dom0 expecting a local xenstored will be redone later when connecting to the xenstore domain. Up to now this was no problem as locking would prevent the two xenbus threads interfering with each other, but this was just a waste of kernel resources. - An out of memory situation while writing to or reading from the xenstore ring buffer no longer will lead to a possible loss of synchronization with xenstore. - The user read and write part are now interruptible by signals. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-02-09 13:39:58 +00:00
enum xsd_sockmsg_type type;
char *body;
const struct kvec *vec;
int num_vecs;
int err;
enum xb_req_state state;
bool user_req;
xen: optimize xenbus driver for multiple concurrent xenstore accesses Handling of multiple concurrent Xenstore accesses through xenbus driver either from the kernel or user land is rather lame today: xenbus is capable to have one access active only at one point of time. Rewrite xenbus to handle multiple requests concurrently by making use of the request id of the Xenstore protocol. This requires to: - Instead of blocking inside xb_read() when trying to read data from the xenstore ring buffer do so only in the main loop of xenbus_thread(). - Instead of doing writes to the xenstore ring buffer in the context of the caller just queue the request and do the write in the dedicated xenbus thread. - Instead of just forwarding the request id specified by the caller of xenbus to xenstore use a xenbus internal unique request id. This will allow multiple outstanding requests. - Modify the locking scheme in order to allow multiple requests being active in parallel. - Instead of waiting for the reply of a user's xenstore request after writing the request to the xenstore ring buffer return directly to the caller and do the waiting in the read path. Additionally signal handling was optimized by avoiding waking up the xenbus thread or sending an event to Xenstore in case the addressed entity is known to be running already. As a result communication with Xenstore is sped up by a factor of up to 5: depending on the request type (read or write) and the amount of data transferred the gain was at least 20% (small reads) and went up to a factor of 5 for large writes. In the end some more rough edges of xenbus have been smoothed: - Handling of memory shortage when reading from xenstore ring buffer in the xenbus driver was not optimal: it was busy looping and issuing a warning in each loop. - In case of xenstore not running in dom0 but in a stubdom we end up with two xenbus threads running as the initialization of xenbus in dom0 expecting a local xenstored will be redone later when connecting to the xenstore domain. Up to now this was no problem as locking would prevent the two xenbus threads interfering with each other, but this was just a waste of kernel resources. - An out of memory situation while writing to or reading from the xenstore ring buffer no longer will lead to a possible loss of synchronization with xenstore. - The user read and write part are now interruptible by signals. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-02-09 13:39:58 +00:00
void (*cb)(struct xb_req_data *);
void *par;
};
extern enum xenstore_init xen_store_domain_type;
extern const struct attribute_group *xenbus_dev_groups[];
xen: optimize xenbus driver for multiple concurrent xenstore accesses Handling of multiple concurrent Xenstore accesses through xenbus driver either from the kernel or user land is rather lame today: xenbus is capable to have one access active only at one point of time. Rewrite xenbus to handle multiple requests concurrently by making use of the request id of the Xenstore protocol. This requires to: - Instead of blocking inside xb_read() when trying to read data from the xenstore ring buffer do so only in the main loop of xenbus_thread(). - Instead of doing writes to the xenstore ring buffer in the context of the caller just queue the request and do the write in the dedicated xenbus thread. - Instead of just forwarding the request id specified by the caller of xenbus to xenstore use a xenbus internal unique request id. This will allow multiple outstanding requests. - Modify the locking scheme in order to allow multiple requests being active in parallel. - Instead of waiting for the reply of a user's xenstore request after writing the request to the xenstore ring buffer return directly to the caller and do the waiting in the read path. Additionally signal handling was optimized by avoiding waking up the xenbus thread or sending an event to Xenstore in case the addressed entity is known to be running already. As a result communication with Xenstore is sped up by a factor of up to 5: depending on the request type (read or write) and the amount of data transferred the gain was at least 20% (small reads) and went up to a factor of 5 for large writes. In the end some more rough edges of xenbus have been smoothed: - Handling of memory shortage when reading from xenstore ring buffer in the xenbus driver was not optimal: it was busy looping and issuing a warning in each loop. - In case of xenstore not running in dom0 but in a stubdom we end up with two xenbus threads running as the initialization of xenbus in dom0 expecting a local xenstored will be redone later when connecting to the xenstore domain. Up to now this was no problem as locking would prevent the two xenbus threads interfering with each other, but this was just a waste of kernel resources. - An out of memory situation while writing to or reading from the xenstore ring buffer no longer will lead to a possible loss of synchronization with xenstore. - The user read and write part are now interruptible by signals. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-02-09 13:39:58 +00:00
extern struct mutex xs_response_mutex;
extern struct list_head xs_reply_list;
extern struct list_head xb_write_list;
extern wait_queue_head_t xb_waitq;
extern struct mutex xb_write_mutex;
int xs_init(void);
int xb_init_comms(void);
void xb_deinit_comms(void);
xen: optimize xenbus driver for multiple concurrent xenstore accesses Handling of multiple concurrent Xenstore accesses through xenbus driver either from the kernel or user land is rather lame today: xenbus is capable to have one access active only at one point of time. Rewrite xenbus to handle multiple requests concurrently by making use of the request id of the Xenstore protocol. This requires to: - Instead of blocking inside xb_read() when trying to read data from the xenstore ring buffer do so only in the main loop of xenbus_thread(). - Instead of doing writes to the xenstore ring buffer in the context of the caller just queue the request and do the write in the dedicated xenbus thread. - Instead of just forwarding the request id specified by the caller of xenbus to xenstore use a xenbus internal unique request id. This will allow multiple outstanding requests. - Modify the locking scheme in order to allow multiple requests being active in parallel. - Instead of waiting for the reply of a user's xenstore request after writing the request to the xenstore ring buffer return directly to the caller and do the waiting in the read path. Additionally signal handling was optimized by avoiding waking up the xenbus thread or sending an event to Xenstore in case the addressed entity is known to be running already. As a result communication with Xenstore is sped up by a factor of up to 5: depending on the request type (read or write) and the amount of data transferred the gain was at least 20% (small reads) and went up to a factor of 5 for large writes. In the end some more rough edges of xenbus have been smoothed: - Handling of memory shortage when reading from xenstore ring buffer in the xenbus driver was not optimal: it was busy looping and issuing a warning in each loop. - In case of xenstore not running in dom0 but in a stubdom we end up with two xenbus threads running as the initialization of xenbus in dom0 expecting a local xenstored will be redone later when connecting to the xenstore domain. Up to now this was no problem as locking would prevent the two xenbus threads interfering with each other, but this was just a waste of kernel resources. - An out of memory situation while writing to or reading from the xenstore ring buffer no longer will lead to a possible loss of synchronization with xenstore. - The user read and write part are now interruptible by signals. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-02-09 13:39:58 +00:00
int xs_watch_msg(struct xs_watch_event *event);
void xs_request_exit(struct xb_req_data *req);
int xenbus_match(struct device *_dev, struct device_driver *_drv);
int xenbus_dev_probe(struct device *_dev);
bus: Make remove callback return void The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-13 19:35:22 +00:00
void xenbus_dev_remove(struct device *_dev);
int xenbus_register_driver_common(struct xenbus_driver *drv,
struct xen_bus_type *bus,
struct module *owner,
const char *mod_name);
int xenbus_probe_node(struct xen_bus_type *bus,
const char *type,
const char *nodename);
int xenbus_probe_devices(struct xen_bus_type *bus);
void xenbus_dev_changed(const char *node, struct xen_bus_type *bus);
int xenbus_dev_suspend(struct device *dev);
int xenbus_dev_resume(struct device *dev);
int xenbus_dev_cancel(struct device *dev);
void xenbus_otherend_changed(struct xenbus_watch *watch,
const char *path, const char *token,
int ignore_on_shutdown);
int xenbus_read_otherend_details(struct xenbus_device *xendev,
char *id_node, char *path_node);
void xenbus_ring_ops_init(void);
xen: optimize xenbus driver for multiple concurrent xenstore accesses Handling of multiple concurrent Xenstore accesses through xenbus driver either from the kernel or user land is rather lame today: xenbus is capable to have one access active only at one point of time. Rewrite xenbus to handle multiple requests concurrently by making use of the request id of the Xenstore protocol. This requires to: - Instead of blocking inside xb_read() when trying to read data from the xenstore ring buffer do so only in the main loop of xenbus_thread(). - Instead of doing writes to the xenstore ring buffer in the context of the caller just queue the request and do the write in the dedicated xenbus thread. - Instead of just forwarding the request id specified by the caller of xenbus to xenstore use a xenbus internal unique request id. This will allow multiple outstanding requests. - Modify the locking scheme in order to allow multiple requests being active in parallel. - Instead of waiting for the reply of a user's xenstore request after writing the request to the xenstore ring buffer return directly to the caller and do the waiting in the read path. Additionally signal handling was optimized by avoiding waking up the xenbus thread or sending an event to Xenstore in case the addressed entity is known to be running already. As a result communication with Xenstore is sped up by a factor of up to 5: depending on the request type (read or write) and the amount of data transferred the gain was at least 20% (small reads) and went up to a factor of 5 for large writes. In the end some more rough edges of xenbus have been smoothed: - Handling of memory shortage when reading from xenstore ring buffer in the xenbus driver was not optimal: it was busy looping and issuing a warning in each loop. - In case of xenstore not running in dom0 but in a stubdom we end up with two xenbus threads running as the initialization of xenbus in dom0 expecting a local xenstored will be redone later when connecting to the xenstore domain. Up to now this was no problem as locking would prevent the two xenbus threads interfering with each other, but this was just a waste of kernel resources. - An out of memory situation while writing to or reading from the xenstore ring buffer no longer will lead to a possible loss of synchronization with xenstore. - The user read and write part are now interruptible by signals. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-02-09 13:39:58 +00:00
int xenbus_dev_request_and_reply(struct xsd_sockmsg *msg, void *par);
void xenbus_dev_queue_reply(struct xb_req_data *req);
extern unsigned int xb_dev_generation_id;
#endif