linux/drivers/media/video/cx88/cx88-cards.c

1247 lines
31 KiB
C
Raw Normal View History

/*
*
* device driver for Conexant 2388x based TV cards
* card-specific stuff.
*
* (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include "cx88.h"
/* ------------------------------------------------------------------ */
/* board config info */
struct cx88_board cx88_boards[] = {
[CX88_BOARD_UNKNOWN] = {
.name = "UNKNOWN/GENERIC",
.tuner_type = UNSET,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 0,
},{
.type = CX88_VMUX_COMPOSITE2,
.vmux = 1,
},{
.type = CX88_VMUX_COMPOSITE3,
.vmux = 2,
},{
.type = CX88_VMUX_COMPOSITE4,
.vmux = 3,
}},
},
[CX88_BOARD_HAUPPAUGE] = {
.name = "Hauppauge WinTV 34xxx models",
.tuner_type = UNSET,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0xff00, // internal decoder
},{
.type = CX88_VMUX_DEBUG,
.vmux = 0,
.gpio0 = 0xff01, // mono from tuner chip
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0xff02,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0xff02,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0xff01,
},
},
[CX88_BOARD_GDI] = {
.name = "GDI Black Gold",
.tuner_type = UNSET,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
[PATCH] V4L: Miscellaneous fixes - Fixed some bttv card numbers. - BTTV and SAA7134 version numbers incremented to reflect changes. - pci_dma_supported() is called after pci_set_dma_mask() which already did check that for us. This patch removes the unneeded call to pci_dma_supported() at bttv-driver.c - Ensure a sufficient I2C bus idle time between 2 messages for saa7134-i2c.c - It is important to write at first to MO_GP3_IO for cx88-tvaudio.c - Use try_to_freeze() instead of refrigerator at msp3400.c - Recognizing the MFPE05-2 Tuner at tveeprom.c - Add new parameter to help identify radio chipsets at tuner module: show_i2c=1 will show 16 reading bytes from detected tuners. - BTTV does generate some Unimplemented IOCTL log at tuner module: 0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending MSP3400 calls to non-msp3400 tuners. Warning eliminated. VIDIOSAUDIO is also called, so debug messages updated. It is still requiring IOCTL implementation. - Added two more tuners. - Add support for the SVideo input on the GDI Black Gold. Signed-off-by: Peter Missel <peter.missel@onlinehome.de> Signed-off-by: Graham Bevan <graham.bevan@ntlworld.com> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 05:34:43 +00:00
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
}},
},
[CX88_BOARD_PIXELVIEW] = {
.name = "PixelView",
.tuner_type = TUNER_PHILIPS_PAL,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0xff00, // internal decoder
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0xff10,
},
},
[CX88_BOARD_ATI_WONDER_PRO] = {
.name = "ATI TV Wonder Pro",
.tuner_type = TUNER_PHILIPS_4IN1,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x03ff,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x03fe,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x03fe,
}},
},
[CX88_BOARD_WINFAST2000XP_EXPERT] = {
.name = "Leadtek Winfast 2000XP Expert",
.tuner_type = TUNER_PHILIPS_4IN1,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00F5e700,
.gpio1 = 0x00003004,
.gpio2 = 0x00F5e700,
.gpio3 = 0x02000000,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x00F5c700,
.gpio1 = 0x00003004,
.gpio2 = 0x00F5c700,
.gpio3 = 0x02000000,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x00F5c700,
.gpio1 = 0x00003004,
.gpio2 = 0x00F5c700,
.gpio3 = 0x02000000,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x00F5d700,
.gpio1 = 0x00003004,
.gpio2 = 0x00F5d700,
.gpio3 = 0x02000000,
},
},
[CX88_BOARD_AVERTV_303] = {
.name = "AverTV Studio 303 (M126)",
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio1 = 0x309f,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio1 = 0x305f,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio1 = 0x305f,
}},
.radio = {
.type = CX88_RADIO,
},
},
[CX88_BOARD_MSI_TVANYWHERE_MASTER] = {
// added gpio values thanks to Michal
// values for PAL from DScaler
.name = "MSI TV-@nywhere Master",
.tuner_type = TUNER_MT2032,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER_NTSC,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x000040bf,
.gpio1 = 0x000080c0,
.gpio2 = 0x0000ff40,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x000040bf,
.gpio1 = 0x000080c0,
.gpio2 = 0x0000ff40,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x000040bf,
.gpio1 = 0x000080c0,
.gpio2 = 0x0000ff40,
}},
.radio = {
.type = CX88_RADIO,
},
},
[CX88_BOARD_WINFAST_DV2000] = {
.name = "Leadtek Winfast DV2000",
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x0035e700,
.gpio1 = 0x00003004,
.gpio2 = 0x0035e700,
.gpio3 = 0x02000000,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x0035c700,
.gpio1 = 0x00003004,
.gpio2 = 0x0035c700,
.gpio3 = 0x02000000,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x0035c700,
.gpio1 = 0x0035c700,
.gpio2 = 0x02000000,
.gpio3 = 0x02000000,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x0035d700,
.gpio1 = 0x00007004,
.gpio2 = 0x0035d700,
.gpio3 = 0x02000000,
},
},
[CX88_BOARD_LEADTEK_PVR2000] = {
// gpio values for PAL version from regspy by DScaler
.name = "Leadtek PVR 2000",
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x0000bde2,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x0000bde6,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x0000bde6,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x0000bd62,
},
.blackbird = 1,
},
[CX88_BOARD_IODATA_GVVCP3PCI] = {
.name = "IODATA GV-VCP3/PCI",
.tuner_type = TUNER_ABSENT,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 0,
},{
.type = CX88_VMUX_COMPOSITE2,
.vmux = 1,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
}},
},
[CX88_BOARD_PROLINK_PLAYTVPVR] = {
.name = "Prolink PlayTV PVR",
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0xff00,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0xff03,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0xff03,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0xff00,
},
},
[CX88_BOARD_ASUS_PVR_416] = {
.name = "ASUS PVR-416",
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x0000fde6,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x0000fde6, // 0x0000fda6 L,R RCA audio in?
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x0000fde2,
},
.blackbird = 1,
},
[CX88_BOARD_MSI_TVANYWHERE] = {
.name = "MSI TV-@nywhere",
.tuner_type = TUNER_MT2032,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00000fbf,
.gpio2 = 0x0000fc08,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x00000fbf,
.gpio2 = 0x0000fc68,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x00000fbf,
.gpio2 = 0x0000fc68,
}},
},
[CX88_BOARD_KWORLD_DVB_T] = {
.name = "KWorld/VStream XPert DVB-T",
.tuner_type = TUNER_ABSENT,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x0700,
.gpio2 = 0x0101,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x0700,
.gpio2 = 0x0101,
}},
.dvb = 1,
},
[CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1] = {
.name = "DViCO FusionHDTV DVB-T1",
.tuner_type = TUNER_ABSENT, /* No analog tuner */
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x000027df,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x000027df,
}},
.dvb = 1,
},
[CX88_BOARD_KWORLD_LTV883] = {
.name = "KWorld LTV883RF",
.tuner_type = TUNER_TNF_8831BGFF,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x07f8,
},{
.type = CX88_VMUX_DEBUG,
.vmux = 0,
.gpio0 = 0x07f9, // mono from tuner chip
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x000007fa,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x000007fa,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x000007f8,
},
},
[CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q] = {
.name = "DViCO FusionHDTV 3 Gold-Q",
.tuner_type = TUNER_MICROTUNE_4042FI5,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
/*
GPIO[0] resets DT3302 DTV receiver
0 - reset asserted
1 - normal operation
GPIO[1] mutes analog audio output connector
0 - enable selected source
1 - mute
GPIO[2] selects source for analog audio output connector
0 - analog audio input connector on tab
1 - analog DAC output from CX23881 chip
GPIO[3] selects RF input connector on tuner module
0 - RF connector labeled CABLE
1 - RF connector labeled ANT
GPIO[4] selects high RF for QAM256 mode
0 - normal RF
1 - high RF
*/
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x0f0d,
},{
.type = CX88_VMUX_CABLE,
.vmux = 0,
.gpio0 = 0x0f05,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x0f00,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x0f00,
}},
.dvb = 1,
},
[CX88_BOARD_HAUPPAUGE_DVB_T1] = {
.name = "Hauppauge Nova-T DVB-T",
.tuner_type = TUNER_ABSENT,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_DVB,
.vmux = 0,
}},
.dvb = 1,
},
[CX88_BOARD_CONEXANT_DVB_T1] = {
.name = "Conexant DVB-T reference design",
.tuner_type = TUNER_ABSENT,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_DVB,
.vmux = 0,
}},
.dvb = 1,
},
[CX88_BOARD_PROVIDEO_PV259] = {
.name = "Provideo PV259",
.tuner_type = TUNER_PHILIPS_FQ1216ME,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
}},
.blackbird = 1,
},
[CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS] = {
.name = "DViCO FusionHDTV DVB-T Plus",
.tuner_type = TUNER_ABSENT, /* No analog tuner */
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x000027df,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x000027df,
}},
.dvb = 1,
},
[CX88_BOARD_DNTV_LIVE_DVB_T] = {
.name = "digitalnow DNTV Live! DVB-T",
.tuner_type = TUNER_ABSENT,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x00000700,
.gpio2 = 0x00000101,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x00000700,
.gpio2 = 0x00000101,
}},
.dvb = 1,
},
[CX88_BOARD_PCHDTV_HD3000] = {
.name = "pcHDTV HD3000 HDTV",
.tuner_type = TUNER_THOMSON_DTT7610,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00008484,
.gpio1 = 0x00000000,
.gpio2 = 0x00000000,
.gpio3 = 0x00000000,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x00008400,
.gpio1 = 0x00000000,
.gpio2 = 0x00000000,
.gpio3 = 0x00000000,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x00008400,
.gpio1 = 0x00000000,
.gpio2 = 0x00000000,
.gpio3 = 0x00000000,
}},
.radio = {
.type = CX88_RADIO,
.vmux = 2,
.gpio0 = 0x00008400,
.gpio1 = 0x00000000,
.gpio2 = 0x00000000,
.gpio3 = 0x00000000,
},
.dvb = 1,
},
[CX88_BOARD_HAUPPAUGE_ROSLYN] = {
// entry added by Kaustubh D. Bhalerao <bhalerao.1@osu.edu>
// GPIO values obtained from regspy, courtesy Sean Covel
.name = "Hauppauge WinTV 28xxx (Roslyn) models",
.tuner_type = UNSET,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 20:03:41 +00:00
.gpio0 = 0xed12, /* internal decoder */
.gpio2 = 0x00ff,
},{
.type = CX88_VMUX_DEBUG,
.vmux = 0,
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 20:03:41 +00:00
.gpio0 = 0xff01, /* mono from tuner chip */
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0xff02,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0xed92,
.gpio2 = 0x00ff,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0xed96,
.gpio2 = 0x00ff,
},
.blackbird = 1,
},
[CX88_BOARD_DIGITALLOGIC_MEC] = {
.name = "Digital-Logic MICROSPACE Entertainment Center (MEC)",
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00009d80,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x00009d76,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x00009d76,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0x00009d00,
},
.blackbird = 1,
},
[CX88_BOARD_IODATA_GVBCTV7E] = {
.name = "IODATA GV/BCTV7E",
.tuner_type = TUNER_PHILIPS_FQ1286,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 1,
.gpio1 = 0x0000e03f,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 2,
.gpio1 = 0x0000e07f,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 3,
.gpio1 = 0x0000e07f,
}}
},
[CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO] = {
.name = "PixelView PlayTV Ultra Pro (Stereo)",
/* May be also TUNER_YMEC_TVF_5533MF for NTSC/M or PAL/M */
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0xbf61, /* internal decoder */
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0xbf63,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0xbf63,
}},
.radio = {
.type = CX88_RADIO,
.gpio0 = 0xbf60,
},
},
[CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T] = {
.name = "DViCO FusionHDTV 3 Gold-T",
.tuner_type = TUNER_THOMSON_DTT7611,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x97ed,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x97e9,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x97e9,
}},
.dvb = 1,
},
[CX88_BOARD_ADSTECH_DVB_T_PCI] = {
.name = "ADS Tech Instant TV DVB-T PCI",
.tuner_type = TUNER_ABSENT,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x0700,
.gpio2 = 0x0101,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x0700,
.gpio2 = 0x0101,
}},
.dvb = 1,
},
[CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1] = {
.name = "TerraTec Cinergy 1400 DVB-T",
.tuner_type = TUNER_ABSENT,
.input = {{
.type = CX88_VMUX_DVB,
.vmux = 0,
}},
.dvb = 1,
},
[CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD] = {
.name = "DViCO FusionHDTV 5 Gold",
.tuner_type = TUNER_LG_TDVS_H062F,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 20:03:41 +00:00
.tda9887_conf = TDA9887_PRESENT,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x87fd,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x87f9,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x87f9,
}},
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 20:03:41 +00:00
.dvb = 1,
},
[CX88_BOARD_AVERMEDIA_ULTRATV_MC_550] = {
.name = "AverMedia UltraTV Media Center PCI 550",
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
.blackbird = 1,
.input = {{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 0,
.gpio0 = 0x0000cd73,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 1,
.gpio0 = 0x0000cd73,
},{
.type = CX88_VMUX_TELEVISION,
.vmux = 3,
.gpio0 = 0x0000cdb3,
}},
.radio = {
.type = CX88_RADIO,
.vmux = 2,
.gpio0 = 0x0000cdf3,
},
},
[CX88_BOARD_KWORLD_VSTREAM_EXPERT_DVD] = {
/* Alexander Wold <awold@bigfoot.com> */
.name = "Kworld V-Stream Xpert DVD",
.tuner_type = UNSET,
.input = {{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x03000000,
.gpio1 = 0x01000000,
.gpio2 = 0x02000000,
.gpio3 = 0x00100000,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x03000000,
.gpio1 = 0x01000000,
.gpio2 = 0x02000000,
.gpio3 = 0x00100000,
}},
},
[CX88_BOARD_ATI_HDTVWONDER] = {
.name = "ATI HDTV Wonder",
.tuner_type = TUNER_PHILIPS_TUV1236D,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00000ff7,
.gpio1 = 0x000000ff,
.gpio2 = 0x00000001,
.gpio3 = 0x00000000,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x00000ffe,
.gpio1 = 0x000000ff,
.gpio2 = 0x00000001,
.gpio3 = 0x00000000,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x00000ffe,
.gpio1 = 0x000000ff,
.gpio2 = 0x00000001,
.gpio3 = 0x00000000,
}},
},
[CX88_BOARD_WINFAST_DTV1000] = {
.name = "WinFast DTV1000-T",
.tuner_type = TUNER_ABSENT,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_DVB,
.vmux = 0,
}},
.dvb = 1,
},
};
const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
/* ------------------------------------------------------------------ */
/* PCI subsystem IDs */
struct cx88_subid cx88_subids[] = {
{
.subvendor = 0x0070,
.subdevice = 0x3400,
.card = CX88_BOARD_HAUPPAUGE,
},{
.subvendor = 0x0070,
.subdevice = 0x3401,
.card = CX88_BOARD_HAUPPAUGE,
},{
.subvendor = 0x14c7,
.subdevice = 0x0106,
.card = CX88_BOARD_GDI,
},{
.subvendor = 0x14c7,
.subdevice = 0x0107, /* with mpeg encoder */
.card = CX88_BOARD_GDI,
},{
.subvendor = PCI_VENDOR_ID_ATI,
.subdevice = 0x00f8,
.card = CX88_BOARD_ATI_WONDER_PRO,
},{
.subvendor = 0x107d,
.subdevice = 0x6611,
.card = CX88_BOARD_WINFAST2000XP_EXPERT,
},{
.subvendor = 0x107d,
.subdevice = 0x6613, /* NTSC */
.card = CX88_BOARD_WINFAST2000XP_EXPERT,
},{
.subvendor = 0x107d,
.subdevice = 0x6620,
.card = CX88_BOARD_WINFAST_DV2000,
},{
.subvendor = 0x107d,
.subdevice = 0x663b,
.card = CX88_BOARD_LEADTEK_PVR2000,
},{
.subvendor = 0x107d,
.subdevice = 0x663C,
.card = CX88_BOARD_LEADTEK_PVR2000,
},{
.subvendor = 0x1461,
.subdevice = 0x000b,
.card = CX88_BOARD_AVERTV_303,
},{
.subvendor = 0x1462,
.subdevice = 0x8606,
.card = CX88_BOARD_MSI_TVANYWHERE_MASTER,
},{
.subvendor = 0x10fc,
.subdevice = 0xd003,
.card = CX88_BOARD_IODATA_GVVCP3PCI,
},{
.subvendor = 0x1043,
.subdevice = 0x4823, /* with mpeg encoder */
.card = CX88_BOARD_ASUS_PVR_416,
},{
.subvendor = 0x17de,
.subdevice = 0x08a6,
.card = CX88_BOARD_KWORLD_DVB_T,
},{
.subvendor = 0x18ac,
.subdevice = 0xd810,
.card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
},{
.subvendor = 0x18ac,
.subdevice = 0xd820,
.card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T,
},{
.subvendor = 0x18ac,
.subdevice = 0xdb00,
.card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1,
},{
.subvendor = 0x0070,
.subdevice = 0x9002,
.card = CX88_BOARD_HAUPPAUGE_DVB_T1,
},{
.subvendor = 0x14f1,
.subdevice = 0x0187,
.card = CX88_BOARD_CONEXANT_DVB_T1,
},{
.subvendor = 0x1540,
.subdevice = 0x2580,
.card = CX88_BOARD_PROVIDEO_PV259,
},{
.subvendor = 0x18ac,
.subdevice = 0xdb10,
.card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS,
},{
.subvendor = 0x1554,
.subdevice = 0x4811,
.card = CX88_BOARD_PIXELVIEW,
},{
.subvendor = 0x7063,
.subdevice = 0x3000, /* HD-3000 card */
.card = CX88_BOARD_PCHDTV_HD3000,
},{
.subvendor = 0x17de,
.subdevice = 0xa8a6,
.card = CX88_BOARD_DNTV_LIVE_DVB_T,
},{
.subvendor = 0x0070,
.subdevice = 0x2801,
.card = CX88_BOARD_HAUPPAUGE_ROSLYN,
},{
.subvendor = 0x14f1,
.subdevice = 0x0342,
.card = CX88_BOARD_DIGITALLOGIC_MEC,
},{
.subvendor = 0x10fc,
.subdevice = 0xd035,
.card = CX88_BOARD_IODATA_GVBCTV7E,
},{
.subvendor = 0x1421,
.subdevice = 0x0334,
.card = CX88_BOARD_ADSTECH_DVB_T_PCI,
},{
.subvendor = 0x153b,
.subdevice = 0x1166,
.card = CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1,
},{
.subvendor = 0x18ac,
.subdevice = 0xd500,
.card = CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD,
},{
.subvendor = 0x1461,
.subdevice = 0x8011,
.card = CX88_BOARD_AVERMEDIA_ULTRATV_MC_550,
},{
.subvendor = PCI_VENDOR_ID_ATI,
.subdevice = 0xa101,
.card = CX88_BOARD_ATI_HDTVWONDER,
},{
.subvendor = 0x107d,
.subdevice = 0x665f,
.card = CX88_BOARD_WINFAST_DTV1000,
},
};
const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
/* ----------------------------------------------------------------------- */
/* some leadtek specific stuff */
static void __devinit leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
{
/* This is just for the "Winfast 2000XP Expert" board ATM; I don't have data on
* any others.
*
* Byte 0 is 1 on the NTSC board.
*/
if (eeprom_data[4] != 0x7d ||
eeprom_data[5] != 0x10 ||
eeprom_data[7] != 0x66) {
printk(KERN_WARNING "%s: Leadtek eeprom invalid.\n",
core->name);
return;
}
core->has_radio = 1;
core->tuner_type = (eeprom_data[6] == 0x13) ? 43 : 38;
printk(KERN_INFO "%s: Leadtek Winfast 2000XP Expert config: "
"tuner=%d, eeprom[0]=0x%02x\n",
core->name, core->tuner_type, eeprom_data[0]);
}
/* ----------------------------------------------------------------------- */
static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
{
struct tveeprom tv;
tveeprom_hauppauge_analog(&core->i2c_client, &tv, eeprom_data);
core->tuner_type = tv.tuner_type;
core->has_radio = tv.has_radio;
}
static int hauppauge_eeprom_dvb(struct cx88_core *core, u8 *ee)
{
int model;
int tuner;
/* Make sure we support the board model */
model = ee[0x1f] << 24 | ee[0x1e] << 16 | ee[0x1d] << 8 | ee[0x1c];
switch(model) {
case 90002:
case 90500:
case 90501:
/* known */
break;
default:
printk("%s: warning: unknown hauppauge model #%d\n",
core->name, model);
break;
}
/* Make sure we support the tuner */
tuner = ee[0x2d];
switch(tuner) {
case 0x4B: /* dtt 7595 */
case 0x4C: /* dtt 7592 */
break;
default:
printk("%s: error: unknown hauppauge tuner 0x%02x\n",
core->name, tuner);
return -ENODEV;
}
printk(KERN_INFO "%s: hauppauge eeprom: model=%d, tuner=%d\n",
core->name, model, tuner);
return 0;
}
/* ----------------------------------------------------------------------- */
/* some GDI (was: Modular Technology) specific stuff */
static struct {
int id;
int fm;
char *name;
} gdi_tuner[] = {
[ 0x01 ] = { .id = TUNER_ABSENT,
.name = "NTSC_M" },
[ 0x02 ] = { .id = TUNER_ABSENT,
.name = "PAL_B" },
[ 0x03 ] = { .id = TUNER_ABSENT,
.name = "PAL_I" },
[ 0x04 ] = { .id = TUNER_ABSENT,
.name = "PAL_D" },
[ 0x05 ] = { .id = TUNER_ABSENT,
.name = "SECAM" },
[ 0x10 ] = { .id = TUNER_ABSENT,
.fm = 1,
.name = "TEMIC_4049" },
[ 0x11 ] = { .id = TUNER_TEMIC_4136FY5,
.name = "TEMIC_4136" },
[ 0x12 ] = { .id = TUNER_ABSENT,
.name = "TEMIC_4146" },
[ 0x20 ] = { .id = TUNER_PHILIPS_FQ1216ME,
.fm = 1,
.name = "PHILIPS_FQ1216_MK3" },
[ 0x21 ] = { .id = TUNER_ABSENT, .fm = 1,
.name = "PHILIPS_FQ1236_MK3" },
[ 0x22 ] = { .id = TUNER_ABSENT,
.name = "PHILIPS_FI1236_MK3" },
[ 0x23 ] = { .id = TUNER_ABSENT,
.name = "PHILIPS_FI1216_MK3" },
};
static void gdi_eeprom(struct cx88_core *core, u8 *eeprom_data)
{
char *name = (eeprom_data[0x0d] < ARRAY_SIZE(gdi_tuner))
? gdi_tuner[eeprom_data[0x0d]].name : NULL;
printk(KERN_INFO "%s: GDI: tuner=%s\n", core->name,
name ? name : "unknown");
if (NULL == name)
return;
core->tuner_type = gdi_tuner[eeprom_data[0x0d]].id;
core->has_radio = gdi_tuner[eeprom_data[0x0d]].fm;
}
/* ----------------------------------------------------------------------- */
void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
{
int i;
if (0 == pci->subsystem_vendor &&
0 == pci->subsystem_device) {
printk("%s: Your board has no valid PCI Subsystem ID and thus can't\n"
"%s: be autodetected. Please pass card=<n> insmod option to\n"
"%s: workaround that. Redirect complaints to the vendor of\n"
"%s: the TV card. Best regards,\n"
"%s: -- tux\n",
core->name,core->name,core->name,core->name,core->name);
} else {
printk("%s: Your board isn't known (yet) to the driver. You can\n"
"%s: try to pick one of the existing card configs via\n"
"%s: card=<n> insmod option. Updating to the latest\n"
"%s: version might help as well.\n",
core->name,core->name,core->name,core->name);
}
printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
core->name);
for (i = 0; i < cx88_bcount; i++)
printk("%s: card=%d -> %s\n",
core->name, i, cx88_boards[i].name);
}
void cx88_card_setup(struct cx88_core *core)
{
static u8 eeprom[128];
if (0 == core->i2c_rc) {
core->i2c_client.addr = 0xa0 >> 1;
tveeprom_read(&core->i2c_client,eeprom,sizeof(eeprom));
}
switch (core->board) {
case CX88_BOARD_HAUPPAUGE:
case CX88_BOARD_HAUPPAUGE_ROSLYN:
if (0 == core->i2c_rc)
hauppauge_eeprom(core,eeprom+8);
break;
case CX88_BOARD_GDI:
if (0 == core->i2c_rc)
gdi_eeprom(core,eeprom);
break;
case CX88_BOARD_WINFAST2000XP_EXPERT:
if (0 == core->i2c_rc)
leadtek_eeprom(core,eeprom);
break;
case CX88_BOARD_HAUPPAUGE_DVB_T1:
if (0 == core->i2c_rc)
hauppauge_eeprom_dvb(core,eeprom);
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
/* GPIO0:0 is hooked to mt352 reset pin */
cx_set(MO_GP0_IO, 0x00000101);
cx_clear(MO_GP0_IO, 0x00000001);
msleep(1);
cx_set(MO_GP0_IO, 0x00000101);
break;
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_DNTV_LIVE_DVB_T:
cx_set(MO_GP0_IO, 0x00000707);
cx_set(MO_GP2_IO, 0x00000101);
cx_clear(MO_GP2_IO, 0x00000001);
msleep(1);
cx_clear(MO_GP0_IO, 0x00000007);
cx_set(MO_GP2_IO, 0x00000101);
break;
case CX88_BOARD_ATI_HDTVWONDER:
if (0 == core->i2c_rc) {
/* enable tuner */
int i;
u8 buffer[12];
core->i2c_client.addr = 0x0a;
buffer[0] = 0x10; buffer[1] = 0x12; buffer[2] = 0x13; buffer[3] = 0x04;
buffer[4] = 0x16; buffer[5] = 0x00; buffer[6] = 0x14; buffer[7] = 0x04;
buffer[8] = 0x14; buffer[9] = 0x00; buffer[10] = 0x17; buffer[11] = 0x00;
for (i = 0; i < 6; i++)
if (2 != i2c_master_send(&core->i2c_client,&buffer[i*2],2))
printk(KERN_WARNING "%s: Unable to enable tuner(%i).\n",
core->name, i);
}
break;
}
if (cx88_boards[core->board].radio.type == CX88_RADIO)
core->has_radio = 1;
}
/* ------------------------------------------------------------------ */
EXPORT_SYMBOL(cx88_boards);
EXPORT_SYMBOL(cx88_bcount);
EXPORT_SYMBOL(cx88_subids);
EXPORT_SYMBOL(cx88_idcount);
EXPORT_SYMBOL(cx88_card_list);
EXPORT_SYMBOL(cx88_card_setup);
/*
* Local variables:
* c-basic-offset: 8
* End:
* kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
*/