linux/arch/powerpc/mm/init_64.c

449 lines
12 KiB
C
Raw Normal View History

/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
* and Cort Dougan (PReP) (cort@cs.nmt.edu)
* Copyright (C) 1996 Paul Mackerras
*
* Derived from "arch/i386/mm/init.c"
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
* Dave Engebretsen <engebret@us.ibm.com>
* Rework for PPC64 port.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#undef DEBUG
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/stddef.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/idr.h>
#include <linux/nodemask.h>
#include <linux/module.h>
#include <linux/poison.h>
#include <linux/memblock.h>
powerpc/mm: Allow more flexible layouts for hugepage pagetables Currently each available hugepage size uses a slightly different pagetable layout: that is, the bottem level table of pointers to hugepages is a different size, and may branch off from the normal page tables at a different level. Every hugepage aware path that needs to walk the pagetables must therefore look up the hugepage size from the slice info first, and work out the correct way to walk the pagetables accordingly. Future hardware is likely to add more possible hugepage sizes, more layout options and more mess. This patch, therefore reworks the handling of hugepage pagetables to reduce this complexity. In the new scheme, instead of having to consult the slice mask, pagetable walking code can check a flag in the PGD/PUD/PMD entries to see where to branch off to hugepage pagetables, and the entry also contains the information (eseentially hugepage shift) necessary to then interpret that table without recourse to the slice mask. This scheme can be extended neatly to handle multiple levels of self-describing "special" hugepage pagetables, although for now we assume only one level exists. This approach means that only the pagetable allocation path needs to know how the pagetables should be set out. All other (hugepage) pagetable walking paths can just interpret the structure as they go. There already was a flag bit in PGD/PUD/PMD entries for hugepage directory pointers, but it was only used for debug. We alter that flag bit to instead be a 0 in the MSB to indicate a hugepage pagetable pointer (normally it would be 1 since the pointer lies in the linear mapping). This means that asm pagetable walking can test for (and punt on) hugepage pointers with the same test that checks for unpopulated page directory entries (beq becomes bge), since hugepage pointers will always be positive, and normal pointers always negative. While we're at it, we get rid of the confusing (and grep defeating) #defining of hugepte_shift to be the same thing as mmu_huge_psizes. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-26 19:24:31 +00:00
#include <linux/hugetlb.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 10:21:34 +00:00
#include <linux/of_fdt.h>
#include <linux/libfdt.h>
#include <linux/memremap.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <linux/uaccess.h>
#include <asm/smp.h>
#include <asm/machdep.h>
#include <asm/tlb.h>
#include <asm/eeh.h>
#include <asm/processor.h>
#include <asm/mmzone.h>
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/iommu.h>
#include <asm/vdso.h>
#include "mmu_decl.h"
[POWERPC] 85xx: Add support for relocatable kernel (and booting at non-zero) Added support to allow an 85xx kernel to be run from a non-zero physical address (useful for cooperative asymmetric multiprocessing situations and kdump). The support can be configured at compile time by setting CONFIG_PAGE_OFFSET, CONFIG_KERNEL_START, and CONFIG_PHYSICAL_START as desired. Alternatively, the kernel build can set CONFIG_RELOCATABLE. Setting this config option causes the kernel to determine at runtime the physical addresses of CONFIG_PAGE_OFFSET and CONFIG_KERNEL_START. If CONFIG_RELOCATABLE is set, then CONFIG_PHYSICAL_START has no meaning. However, CONFIG_PHYSICAL_START will always be used to set the LOAD program header physical address field in the resulting ELF image. Currently we are limited to running at a physical address that is a multiple of 256M. This is due to how we map TLBs to cover lowmem. This should be fixed to allow 64M or maybe even 16M alignment in the future. It is considered an error to try and run a kernel at a non-aligned physical address. All the magic for this support is accomplished by proper initialization of the kernel memory subsystem and use of ARCH_PFN_OFFSET. The use of ARCH_PFN_OFFSET only affects normal memory and not IO mappings. ioremap uses map_page and isn't affected by ARCH_PFN_OFFSET. /dev/mem continues to allow access to any physical address in the system regardless of how CONFIG_PHYSICAL_START is set. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-21 18:22:34 +00:00
phys_addr_t memstart_addr = ~0;
EXPORT_SYMBOL_GPL(memstart_addr);
[POWERPC] 85xx: Add support for relocatable kernel (and booting at non-zero) Added support to allow an 85xx kernel to be run from a non-zero physical address (useful for cooperative asymmetric multiprocessing situations and kdump). The support can be configured at compile time by setting CONFIG_PAGE_OFFSET, CONFIG_KERNEL_START, and CONFIG_PHYSICAL_START as desired. Alternatively, the kernel build can set CONFIG_RELOCATABLE. Setting this config option causes the kernel to determine at runtime the physical addresses of CONFIG_PAGE_OFFSET and CONFIG_KERNEL_START. If CONFIG_RELOCATABLE is set, then CONFIG_PHYSICAL_START has no meaning. However, CONFIG_PHYSICAL_START will always be used to set the LOAD program header physical address field in the resulting ELF image. Currently we are limited to running at a physical address that is a multiple of 256M. This is due to how we map TLBs to cover lowmem. This should be fixed to allow 64M or maybe even 16M alignment in the future. It is considered an error to try and run a kernel at a non-aligned physical address. All the magic for this support is accomplished by proper initialization of the kernel memory subsystem and use of ARCH_PFN_OFFSET. The use of ARCH_PFN_OFFSET only affects normal memory and not IO mappings. ioremap uses map_page and isn't affected by ARCH_PFN_OFFSET. /dev/mem continues to allow access to any physical address in the system regardless of how CONFIG_PHYSICAL_START is set. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-21 18:22:34 +00:00
phys_addr_t kernstart_addr;
EXPORT_SYMBOL_GPL(kernstart_addr);
#ifdef CONFIG_SPARSEMEM_VMEMMAP
/*
* Given an address within the vmemmap, determine the pfn of the page that
* represents the start of the section it is within. Note that we have to
* do this by hand as the proffered address may not be correctly aligned.
* Subtraction of non-aligned pointers produces undefined results.
*/
static unsigned long __meminit vmemmap_section_start(unsigned long page)
{
unsigned long offset = page - ((unsigned long)(vmemmap));
/* Return the pfn of the start of the section. */
return (offset / sizeof(struct page)) & PAGE_SECTION_MASK;
}
/*
* Check if this vmemmap page is already initialised. If any section
* which overlaps this vmemmap page is initialised then this page is
* initialised already.
*/
static int __meminit vmemmap_populated(unsigned long start, int page_size)
{
unsigned long end = start + page_size;
start = (unsigned long)(pfn_to_page(vmemmap_section_start(start)));
for (; start < end; start += (PAGES_PER_SECTION * sizeof(struct page)))
if (pfn_valid(page_to_pfn((struct page *)start)))
return 1;
return 0;
}
/*
* vmemmap virtual address space management does not have a traditonal page
* table to track which virtual struct pages are backed by physical mapping.
* The virtual to physical mappings are tracked in a simple linked list
* format. 'vmemmap_list' maintains the entire vmemmap physical mapping at
* all times where as the 'next' list maintains the available
* vmemmap_backing structures which have been deleted from the
* 'vmemmap_global' list during system runtime (memory hotplug remove
* operation). The freed 'vmemmap_backing' structures are reused later when
* new requests come in without allocating fresh memory. This pointer also
* tracks the allocated 'vmemmap_backing' structures as we allocate one
* full page memory at a time when we dont have any.
*/
struct vmemmap_backing *vmemmap_list;
static struct vmemmap_backing *next;
/*
* The same pointer 'next' tracks individual chunks inside the allocated
* full page during the boot time and again tracks the freeed nodes during
* runtime. It is racy but it does not happen as they are separated by the
* boot process. Will create problem if some how we have memory hotplug
* operation during boot !!
*/
static int num_left;
static int num_freed;
static __meminit struct vmemmap_backing * vmemmap_list_alloc(int node)
{
struct vmemmap_backing *vmem_back;
/* get from freed entries first */
if (num_freed) {
num_freed--;
vmem_back = next;
next = next->list;
return vmem_back;
}
/* allocate a page when required and hand out chunks */
if (!num_left) {
next = vmemmap_alloc_block(PAGE_SIZE, node);
if (unlikely(!next)) {
WARN_ON(1);
return NULL;
}
num_left = PAGE_SIZE / sizeof(struct vmemmap_backing);
}
num_left--;
return next++;
}
static __meminit void vmemmap_list_populate(unsigned long phys,
unsigned long start,
int node)
{
struct vmemmap_backing *vmem_back;
vmem_back = vmemmap_list_alloc(node);
if (unlikely(!vmem_back)) {
WARN_ON(1);
return;
}
vmem_back->phys = phys;
vmem_back->virt_addr = start;
vmem_back->list = vmemmap_list;
vmemmap_list = vmem_back;
}
int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
struct vmem_altmap *altmap)
{
unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
/* Align to the page size of the linear mapping. */
start = _ALIGN_DOWN(start, page_size);
pr_debug("vmemmap_populate %lx..%lx, node %d\n", start, end, node);
for (; start < end; start += page_size) {
void *p;
int rc;
if (vmemmap_populated(start, page_size))
continue;
if (altmap)
p = altmap_alloc_block_buf(page_size, altmap);
else
p = vmemmap_alloc_block_buf(page_size, node);
if (!p)
return -ENOMEM;
vmemmap_list_populate(__pa(p), start, node);
pr_debug(" * %016lx..%016lx allocated at %p\n",
start, start + page_size, p);
rc = vmemmap_create_mapping(start, page_size, __pa(p));
if (rc < 0) {
pr_warn("%s: Unable to create vmemmap mapping: %d\n",
__func__, rc);
return -EFAULT;
}
}
return 0;
}
#ifdef CONFIG_MEMORY_HOTPLUG
static unsigned long vmemmap_list_free(unsigned long start)
{
struct vmemmap_backing *vmem_back, *vmem_back_prev;
vmem_back_prev = vmem_back = vmemmap_list;
/* look for it with prev pointer recorded */
for (; vmem_back; vmem_back = vmem_back->list) {
if (vmem_back->virt_addr == start)
break;
vmem_back_prev = vmem_back;
}
if (unlikely(!vmem_back)) {
WARN_ON(1);
return 0;
}
/* remove it from vmemmap_list */
if (vmem_back == vmemmap_list) /* remove head */
vmemmap_list = vmem_back->list;
else
vmem_back_prev->list = vmem_back->list;
/* next point to this freed entry */
vmem_back->list = next;
next = vmem_back;
num_freed++;
return vmem_back->phys;
}
void __ref vmemmap_free(unsigned long start, unsigned long end,
struct vmem_altmap *altmap)
{
unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
unsigned long page_order = get_order(page_size);
start = _ALIGN_DOWN(start, page_size);
pr_debug("vmemmap_free %lx...%lx\n", start, end);
for (; start < end; start += page_size) {
unsigned long nr_pages, addr;
struct page *section_base;
struct page *page;
/*
* the section has already be marked as invalid, so
* vmemmap_populated() true means some other sections still
* in this page, so skip it.
*/
if (vmemmap_populated(start, page_size))
continue;
addr = vmemmap_list_free(start);
if (!addr)
continue;
page = pfn_to_page(addr >> PAGE_SHIFT);
section_base = pfn_to_page(vmemmap_section_start(start));
nr_pages = 1 << page_order;
if (altmap) {
vmem_altmap_free(altmap, nr_pages);
} else if (PageReserved(page)) {
/* allocated from bootmem */
if (page_size < PAGE_SIZE) {
/*
* this shouldn't happen, but if it is
* the case, leave the memory there
*/
WARN_ON_ONCE(1);
} else {
while (nr_pages--)
free_reserved_page(page++);
}
} else {
free_pages((unsigned long)(__va(addr)), page_order);
}
vmemmap_remove_mapping(start, page_size);
}
}
#endif
void register_page_bootmem_memmap(unsigned long section_nr,
struct page *start_page, unsigned long size)
{
}
2013-08-28 08:37:42 +00:00
/*
* We do not have access to the sparsemem vmemmap, so we fallback to
* walking the list of sparsemem blocks which we already maintain for
* the sake of crashdump. In the long run, we might want to maintain
* a tree if performance of that linear walk becomes a problem.
*
* realmode_pfn_to_page functions can fail due to:
* 1) As real sparsemem blocks do not lay in RAM continously (they
* are in virtual address space which is not available in the real mode),
* the requested page struct can be split between blocks so get_page/put_page
* may fail.
* 2) When huge pages are used, the get_page/put_page API will fail
* in real mode as the linked addresses in the page struct are virtual
* too.
*/
struct page *realmode_pfn_to_page(unsigned long pfn)
{
struct vmemmap_backing *vmem_back;
struct page *page;
unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
unsigned long pg_va = (unsigned long) pfn_to_page(pfn);
for (vmem_back = vmemmap_list; vmem_back; vmem_back = vmem_back->list) {
if (pg_va < vmem_back->virt_addr)
continue;
/* After vmemmap_list entry free is possible, need check all */
if ((pg_va + sizeof(struct page)) <=
(vmem_back->virt_addr + page_size)) {
page = (struct page *) (vmem_back->phys + pg_va -
2013-08-28 08:37:42 +00:00
vmem_back->virt_addr);
return page;
}
2013-08-28 08:37:42 +00:00
}
/* Probably that page struct is split between real pages */
2013-08-28 08:37:42 +00:00
return NULL;
}
EXPORT_SYMBOL_GPL(realmode_pfn_to_page);
#else
2013-08-28 08:37:42 +00:00
struct page *realmode_pfn_to_page(unsigned long pfn)
{
struct page *page = pfn_to_page(pfn);
return page;
}
EXPORT_SYMBOL_GPL(realmode_pfn_to_page);
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
#ifdef CONFIG_PPC_BOOK3S_64
static bool disable_radix = !IS_ENABLED(CONFIG_PPC_RADIX_MMU_DEFAULT);
static int __init parse_disable_radix(char *p)
{
bool val;
if (!p)
val = true;
else if (kstrtobool(p, &val))
return -EINVAL;
disable_radix = val;
return 0;
}
early_param("disable_radix", parse_disable_radix);
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 10:21:34 +00:00
/*
* If we're running under a hypervisor, we need to check the contents of
* /chosen/ibm,architecture-vec-5 to see if the hypervisor is willing to do
* radix. If not, we clear the radix feature bit so we fall back to hash.
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 10:21:34 +00:00
*/
static void __init early_check_vec5(void)
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 10:21:34 +00:00
{
unsigned long root, chosen;
int size;
const u8 *vec5;
u8 mmu_supported;
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 10:21:34 +00:00
root = of_get_flat_dt_root();
chosen = of_get_flat_dt_subnode_by_name(root, "chosen");
if (chosen == -FDT_ERR_NOTFOUND) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 10:21:34 +00:00
return;
}
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 10:21:34 +00:00
vec5 = of_get_flat_dt_prop(chosen, "ibm,architecture-vec-5", &size);
if (!vec5) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 10:21:34 +00:00
return;
}
if (size <= OV5_INDX(OV5_MMU_SUPPORT)) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
return;
}
/* Check for supported configuration */
mmu_supported = vec5[OV5_INDX(OV5_MMU_SUPPORT)] &
OV5_FEAT(OV5_MMU_SUPPORT);
if (mmu_supported == OV5_FEAT(OV5_MMU_RADIX)) {
/* Hypervisor only supports radix - check enabled && GTSE */
if (!early_radix_enabled()) {
pr_warn("WARNING: Ignoring cmdline option disable_radix\n");
}
if (!(vec5[OV5_INDX(OV5_RADIX_GTSE)] &
OV5_FEAT(OV5_RADIX_GTSE))) {
pr_warn("WARNING: Hypervisor doesn't support RADIX with GTSE\n");
}
/* Do radix anyway - the hypervisor said we had to */
cur_cpu_spec->mmu_features |= MMU_FTR_TYPE_RADIX;
} else if (mmu_supported == OV5_FEAT(OV5_MMU_HASH)) {
/* Hypervisor only supports hash - disable radix */
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
}
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 10:21:34 +00:00
}
void __init mmu_early_init_devtree(void)
{
/* Disable radix mode based on kernel command line. */
if (disable_radix)
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 10:21:34 +00:00
/*
* Check /chosen/ibm,architecture-vec-5 if running as a guest.
* When running bare-metal, we can use radix if we like
* even though the ibm,architecture-vec-5 property created by
* skiboot doesn't have the necessary bits set.
*/
if (!(mfmsr() & MSR_HV))
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 10:21:34 +00:00
early_check_vec5();
if (early_radix_enabled())
radix__early_init_devtree();
else
hash__early_init_devtree();
}
#endif /* CONFIG_PPC_BOOK3S_64 */