linux/net/wireless/pmsr.c

601 lines
16 KiB
C
Raw Normal View History

cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2018 - 2019 Intel Corporation
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
*/
#ifndef __PMSR_H
#define __PMSR_H
#include <net/cfg80211.h>
#include "core.h"
#include "nl80211.h"
#include "rdev-ops.h"
static int pmsr_parse_ftm(struct cfg80211_registered_device *rdev,
struct nlattr *ftmreq,
struct cfg80211_pmsr_request_peer *out,
struct genl_info *info)
{
const struct cfg80211_pmsr_capabilities *capa = rdev->wiphy.pmsr_capa;
struct nlattr *tb[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1];
u32 preamble = NL80211_PREAMBLE_DMG; /* only optional in DMG */
/* validate existing data */
if (!(rdev->wiphy.pmsr_capa->ftm.bandwidths & BIT(out->chandef.width))) {
NL_SET_ERR_MSG(info->extack, "FTM: unsupported bandwidth");
return -EINVAL;
}
/* no validation needed - was already done via nested policy */
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
nla_parse_nested_deprecated(tb, NL80211_PMSR_FTM_REQ_ATTR_MAX, ftmreq,
NULL, NULL);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
if (tb[NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE])
preamble = nla_get_u32(tb[NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE]);
/* set up values - struct is 0-initialized */
out->ftm.requested = true;
switch (out->chandef.chan->band) {
case NL80211_BAND_60GHZ:
/* optional */
break;
default:
if (!tb[NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE]) {
NL_SET_ERR_MSG(info->extack,
"FTM: must specify preamble");
return -EINVAL;
}
}
if (!(capa->ftm.preambles & BIT(preamble))) {
NL_SET_ERR_MSG_ATTR(info->extack,
tb[NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE],
"FTM: invalid preamble");
return -EINVAL;
}
out->ftm.preamble = preamble;
out->ftm.burst_period = 0;
if (tb[NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD])
out->ftm.burst_period =
nla_get_u32(tb[NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD]);
out->ftm.asap = !!tb[NL80211_PMSR_FTM_REQ_ATTR_ASAP];
if (out->ftm.asap && !capa->ftm.asap) {
NL_SET_ERR_MSG_ATTR(info->extack,
tb[NL80211_PMSR_FTM_REQ_ATTR_ASAP],
"FTM: ASAP mode not supported");
return -EINVAL;
}
if (!out->ftm.asap && !capa->ftm.non_asap) {
NL_SET_ERR_MSG(info->extack,
"FTM: non-ASAP mode not supported");
return -EINVAL;
}
out->ftm.num_bursts_exp = 0;
if (tb[NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP])
out->ftm.num_bursts_exp =
nla_get_u32(tb[NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP]);
if (capa->ftm.max_bursts_exponent >= 0 &&
out->ftm.num_bursts_exp > capa->ftm.max_bursts_exponent) {
NL_SET_ERR_MSG_ATTR(info->extack,
tb[NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP],
"FTM: max NUM_BURSTS_EXP must be set lower than the device limit");
return -EINVAL;
}
out->ftm.burst_duration = 15;
if (tb[NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION])
out->ftm.burst_duration =
nla_get_u32(tb[NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION]);
out->ftm.ftms_per_burst = 0;
if (tb[NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST])
out->ftm.ftms_per_burst =
nla_get_u32(tb[NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST]);
if (capa->ftm.max_ftms_per_burst &&
(out->ftm.ftms_per_burst > capa->ftm.max_ftms_per_burst ||
out->ftm.ftms_per_burst == 0)) {
NL_SET_ERR_MSG_ATTR(info->extack,
tb[NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST],
"FTM: FTMs per burst must be set lower than the device limit but non-zero");
return -EINVAL;
}
out->ftm.ftmr_retries = 3;
if (tb[NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES])
out->ftm.ftmr_retries =
nla_get_u32(tb[NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES]);
out->ftm.request_lci = !!tb[NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI];
if (out->ftm.request_lci && !capa->ftm.request_lci) {
NL_SET_ERR_MSG_ATTR(info->extack,
tb[NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI],
"FTM: LCI request not supported");
}
out->ftm.request_civicloc =
!!tb[NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC];
if (out->ftm.request_civicloc && !capa->ftm.request_civicloc) {
NL_SET_ERR_MSG_ATTR(info->extack,
tb[NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC],
"FTM: civic location request not supported");
}
return 0;
}
static int pmsr_parse_peer(struct cfg80211_registered_device *rdev,
struct nlattr *peer,
struct cfg80211_pmsr_request_peer *out,
struct genl_info *info)
{
struct nlattr *tb[NL80211_PMSR_PEER_ATTR_MAX + 1];
struct nlattr *req[NL80211_PMSR_REQ_ATTR_MAX + 1];
struct nlattr *treq;
int err, rem;
/* no validation needed - was already done via nested policy */
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
nla_parse_nested_deprecated(tb, NL80211_PMSR_PEER_ATTR_MAX, peer,
NULL, NULL);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
if (!tb[NL80211_PMSR_PEER_ATTR_ADDR] ||
!tb[NL80211_PMSR_PEER_ATTR_CHAN] ||
!tb[NL80211_PMSR_PEER_ATTR_REQ]) {
NL_SET_ERR_MSG_ATTR(info->extack, peer,
"insufficient peer data");
return -EINVAL;
}
memcpy(out->addr, nla_data(tb[NL80211_PMSR_PEER_ATTR_ADDR]), ETH_ALEN);
/* reuse info->attrs */
memset(info->attrs, 0, sizeof(*info->attrs) * (NL80211_ATTR_MAX + 1));
/* need to validate here, we don't want to have validation recursion */
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nla_parse_nested_deprecated(info->attrs, NL80211_ATTR_MAX,
tb[NL80211_PMSR_PEER_ATTR_CHAN],
nl80211_policy, info->extack);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
if (err)
return err;
err = nl80211_parse_chandef(rdev, info, &out->chandef);
if (err)
return err;
/* no validation needed - was already done via nested policy */
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
nla_parse_nested_deprecated(req, NL80211_PMSR_REQ_ATTR_MAX,
tb[NL80211_PMSR_PEER_ATTR_REQ], NULL,
NULL);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
if (!req[NL80211_PMSR_REQ_ATTR_DATA]) {
NL_SET_ERR_MSG_ATTR(info->extack,
tb[NL80211_PMSR_PEER_ATTR_REQ],
"missing request type/data");
return -EINVAL;
}
if (req[NL80211_PMSR_REQ_ATTR_GET_AP_TSF])
out->report_ap_tsf = true;
if (out->report_ap_tsf && !rdev->wiphy.pmsr_capa->report_ap_tsf) {
NL_SET_ERR_MSG_ATTR(info->extack,
req[NL80211_PMSR_REQ_ATTR_GET_AP_TSF],
"reporting AP TSF is not supported");
return -EINVAL;
}
nla_for_each_nested(treq, req[NL80211_PMSR_REQ_ATTR_DATA], rem) {
switch (nla_type(treq)) {
case NL80211_PMSR_TYPE_FTM:
err = pmsr_parse_ftm(rdev, treq, out, info);
break;
default:
NL_SET_ERR_MSG_ATTR(info->extack, treq,
"unsupported measurement type");
err = -EINVAL;
}
}
if (err)
return err;
return 0;
}
int nl80211_pmsr_start(struct sk_buff *skb, struct genl_info *info)
{
struct nlattr *reqattr = info->attrs[NL80211_ATTR_PEER_MEASUREMENTS];
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
struct cfg80211_pmsr_request *req;
struct nlattr *peers, *peer;
int count, rem, err, idx;
if (!rdev->wiphy.pmsr_capa)
return -EOPNOTSUPP;
if (!reqattr)
return -EINVAL;
peers = nla_find(nla_data(reqattr), nla_len(reqattr),
NL80211_PMSR_ATTR_PEERS);
if (!peers)
return -EINVAL;
count = 0;
nla_for_each_nested(peer, peers, rem) {
count++;
if (count > rdev->wiphy.pmsr_capa->max_peers) {
NL_SET_ERR_MSG_ATTR(info->extack, peer,
"Too many peers used");
return -EINVAL;
}
}
req = kzalloc(struct_size(req, peers, count), GFP_KERNEL);
if (!req)
return -ENOMEM;
if (info->attrs[NL80211_ATTR_TIMEOUT])
req->timeout = nla_get_u32(info->attrs[NL80211_ATTR_TIMEOUT]);
if (info->attrs[NL80211_ATTR_MAC]) {
if (!rdev->wiphy.pmsr_capa->randomize_mac_addr) {
NL_SET_ERR_MSG_ATTR(info->extack,
info->attrs[NL80211_ATTR_MAC],
"device cannot randomize MAC address");
err = -EINVAL;
goto out_err;
}
err = nl80211_parse_random_mac(info->attrs, req->mac_addr,
req->mac_addr_mask);
if (err)
goto out_err;
} else {
memcpy(req->mac_addr, wdev_address(wdev), ETH_ALEN);
eth_broadcast_addr(req->mac_addr_mask);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
}
idx = 0;
nla_for_each_nested(peer, peers, rem) {
/* NB: this reuses info->attrs, but we no longer need it */
err = pmsr_parse_peer(rdev, peer, &req->peers[idx], info);
if (err)
goto out_err;
idx++;
}
req->n_peers = count;
req->cookie = cfg80211_assign_cookie(rdev);
req->nl_portid = info->snd_portid;
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
err = rdev_start_pmsr(rdev, wdev, req);
if (err)
goto out_err;
list_add_tail(&req->list, &wdev->pmsr_list);
nl_set_extack_cookie_u64(info->extack, req->cookie);
return 0;
out_err:
kfree(req);
return err;
}
void cfg80211_pmsr_complete(struct wireless_dev *wdev,
struct cfg80211_pmsr_request *req,
gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct sk_buff *msg;
void *hdr;
trace_cfg80211_pmsr_complete(wdev->wiphy, wdev, req->cookie);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
goto free_request;
hdr = nl80211hdr_put(msg, 0, 0, 0,
NL80211_CMD_PEER_MEASUREMENT_COMPLETE);
if (!hdr)
goto free_msg;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD))
goto free_msg;
if (nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, req->cookie,
NL80211_ATTR_PAD))
goto free_msg;
genlmsg_end(msg, hdr);
genlmsg_unicast(wiphy_net(wdev->wiphy), msg, req->nl_portid);
goto free_request;
free_msg:
nlmsg_free(msg);
free_request:
spin_lock_bh(&wdev->pmsr_lock);
list_del(&req->list);
spin_unlock_bh(&wdev->pmsr_lock);
kfree(req);
}
EXPORT_SYMBOL_GPL(cfg80211_pmsr_complete);
static int nl80211_pmsr_send_ftm_res(struct sk_buff *msg,
struct cfg80211_pmsr_result *res)
{
if (res->status == NL80211_PMSR_STATUS_FAILURE) {
if (nla_put_u32(msg, NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON,
res->ftm.failure_reason))
goto error;
if (res->ftm.failure_reason ==
NL80211_PMSR_FTM_FAILURE_PEER_BUSY &&
res->ftm.busy_retry_time &&
nla_put_u32(msg, NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME,
res->ftm.busy_retry_time))
goto error;
return 0;
}
#define PUT(tp, attr, val) \
do { \
if (nla_put_##tp(msg, \
NL80211_PMSR_FTM_RESP_ATTR_##attr, \
res->ftm.val)) \
goto error; \
} while (0)
#define PUTOPT(tp, attr, val) \
do { \
if (res->ftm.val##_valid) \
PUT(tp, attr, val); \
} while (0)
#define PUT_U64(attr, val) \
do { \
if (nla_put_u64_64bit(msg, \
NL80211_PMSR_FTM_RESP_ATTR_##attr,\
res->ftm.val, \
NL80211_PMSR_FTM_RESP_ATTR_PAD)) \
goto error; \
} while (0)
#define PUTOPT_U64(attr, val) \
do { \
if (res->ftm.val##_valid) \
PUT_U64(attr, val); \
} while (0)
if (res->ftm.burst_index >= 0)
PUT(u32, BURST_INDEX, burst_index);
PUTOPT(u32, NUM_FTMR_ATTEMPTS, num_ftmr_attempts);
PUTOPT(u32, NUM_FTMR_SUCCESSES, num_ftmr_successes);
PUT(u8, NUM_BURSTS_EXP, num_bursts_exp);
PUT(u8, BURST_DURATION, burst_duration);
PUT(u8, FTMS_PER_BURST, ftms_per_burst);
PUTOPT(s32, RSSI_AVG, rssi_avg);
PUTOPT(s32, RSSI_SPREAD, rssi_spread);
if (res->ftm.tx_rate_valid &&
!nl80211_put_sta_rate(msg, &res->ftm.tx_rate,
NL80211_PMSR_FTM_RESP_ATTR_TX_RATE))
goto error;
if (res->ftm.rx_rate_valid &&
!nl80211_put_sta_rate(msg, &res->ftm.rx_rate,
NL80211_PMSR_FTM_RESP_ATTR_RX_RATE))
goto error;
PUTOPT_U64(RTT_AVG, rtt_avg);
PUTOPT_U64(RTT_VARIANCE, rtt_variance);
PUTOPT_U64(RTT_SPREAD, rtt_spread);
PUTOPT_U64(DIST_AVG, dist_avg);
PUTOPT_U64(DIST_VARIANCE, dist_variance);
PUTOPT_U64(DIST_SPREAD, dist_spread);
if (res->ftm.lci && res->ftm.lci_len &&
nla_put(msg, NL80211_PMSR_FTM_RESP_ATTR_LCI,
res->ftm.lci_len, res->ftm.lci))
goto error;
if (res->ftm.civicloc && res->ftm.civicloc_len &&
nla_put(msg, NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC,
res->ftm.civicloc_len, res->ftm.civicloc))
goto error;
#undef PUT
#undef PUTOPT
#undef PUT_U64
#undef PUTOPT_U64
return 0;
error:
return -ENOSPC;
}
static int nl80211_pmsr_send_result(struct sk_buff *msg,
struct cfg80211_pmsr_result *res)
{
struct nlattr *pmsr, *peers, *peer, *resp, *data, *typedata;
pmsr = nla_nest_start_noflag(msg, NL80211_ATTR_PEER_MEASUREMENTS);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
if (!pmsr)
goto error;
peers = nla_nest_start_noflag(msg, NL80211_PMSR_ATTR_PEERS);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
if (!peers)
goto error;
peer = nla_nest_start_noflag(msg, 1);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
if (!peer)
goto error;
if (nla_put(msg, NL80211_PMSR_PEER_ATTR_ADDR, ETH_ALEN, res->addr))
goto error;
resp = nla_nest_start_noflag(msg, NL80211_PMSR_PEER_ATTR_RESP);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
if (!resp)
goto error;
if (nla_put_u32(msg, NL80211_PMSR_RESP_ATTR_STATUS, res->status) ||
nla_put_u64_64bit(msg, NL80211_PMSR_RESP_ATTR_HOST_TIME,
res->host_time, NL80211_PMSR_RESP_ATTR_PAD))
goto error;
if (res->ap_tsf_valid &&
nla_put_u64_64bit(msg, NL80211_PMSR_RESP_ATTR_AP_TSF,
res->ap_tsf, NL80211_PMSR_RESP_ATTR_PAD))
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
goto error;
if (res->final && nla_put_flag(msg, NL80211_PMSR_RESP_ATTR_FINAL))
goto error;
data = nla_nest_start_noflag(msg, NL80211_PMSR_RESP_ATTR_DATA);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
if (!data)
goto error;
typedata = nla_nest_start_noflag(msg, res->type);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
if (!typedata)
goto error;
switch (res->type) {
case NL80211_PMSR_TYPE_FTM:
if (nl80211_pmsr_send_ftm_res(msg, res))
goto error;
break;
default:
WARN_ON(1);
}
nla_nest_end(msg, typedata);
nla_nest_end(msg, data);
nla_nest_end(msg, resp);
nla_nest_end(msg, peer);
nla_nest_end(msg, peers);
nla_nest_end(msg, pmsr);
return 0;
error:
return -ENOSPC;
}
void cfg80211_pmsr_report(struct wireless_dev *wdev,
struct cfg80211_pmsr_request *req,
struct cfg80211_pmsr_result *result,
gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct sk_buff *msg;
void *hdr;
int err;
trace_cfg80211_pmsr_report(wdev->wiphy, wdev, req->cookie,
result->addr);
/*
* Currently, only variable items are LCI and civic location,
* both of which are reasonably short so we don't need to
* worry about them here for the allocation.
*/
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_PEER_MEASUREMENT_RESULT);
if (!hdr)
goto free;
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD))
goto free;
if (nla_put_u64_64bit(msg, NL80211_ATTR_COOKIE, req->cookie,
NL80211_ATTR_PAD))
goto free;
err = nl80211_pmsr_send_result(msg, result);
if (err) {
pr_err_ratelimited("peer measurement result: message didn't fit!");
goto free;
}
genlmsg_end(msg, hdr);
genlmsg_unicast(wiphy_net(wdev->wiphy), msg, req->nl_portid);
return;
free:
nlmsg_free(msg);
}
EXPORT_SYMBOL_GPL(cfg80211_pmsr_report);
static void cfg80211_pmsr_process_abort(struct wireless_dev *wdev)
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_pmsr_request *req, *tmp;
LIST_HEAD(free_list);
lockdep_assert_held(&wdev->mtx);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
spin_lock_bh(&wdev->pmsr_lock);
list_for_each_entry_safe(req, tmp, &wdev->pmsr_list, list) {
if (req->nl_portid)
continue;
list_move_tail(&req->list, &free_list);
}
spin_unlock_bh(&wdev->pmsr_lock);
list_for_each_entry_safe(req, tmp, &free_list, list) {
rdev_abort_pmsr(rdev, wdev, req);
kfree(req);
}
}
void cfg80211_pmsr_free_wk(struct work_struct *work)
{
struct wireless_dev *wdev = container_of(work, struct wireless_dev,
pmsr_free_wk);
wdev_lock(wdev);
cfg80211_pmsr_process_abort(wdev);
wdev_unlock(wdev);
}
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
void cfg80211_pmsr_wdev_down(struct wireless_dev *wdev)
{
struct cfg80211_pmsr_request *req;
bool found = false;
spin_lock_bh(&wdev->pmsr_lock);
list_for_each_entry(req, &wdev->pmsr_list, list) {
found = true;
req->nl_portid = 0;
}
spin_unlock_bh(&wdev->pmsr_lock);
if (found)
cfg80211_pmsr_process_abort(wdev);
cfg80211: add peer measurement with FTM initiator API Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 11:29:12 +00:00
WARN_ON(!list_empty(&wdev->pmsr_list));
}
void cfg80211_release_pmsr(struct wireless_dev *wdev, u32 portid)
{
struct cfg80211_pmsr_request *req;
spin_lock_bh(&wdev->pmsr_lock);
list_for_each_entry(req, &wdev->pmsr_list, list) {
if (req->nl_portid == portid) {
req->nl_portid = 0;
schedule_work(&wdev->pmsr_free_wk);
}
}
spin_unlock_bh(&wdev->pmsr_lock);
}
#endif /* __PMSR_H */