leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
84d4d6f882
linux/drivers/pci/host/vmd.c

800 lines
20 KiB
C
Raw Normal View History

PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate Add SPDX GPL-2.0 to all PCI files that specified the GPL version 2 license. Remove the boilerplate GPL version 2 language, relying on the assertion in b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") that the SPDX identifier may be used instead of the full boilerplate text. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-26 18:50:27 +00:00
// SPDX-License-Identifier: GPL-2.0
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
/*
* Volume Management Device driver
* Copyright (c) 2015, Intel Corporation.
*/
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/msi.h>
#include <linux/pci.h>
PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-11 23:08:45 +00:00
#include <linux/srcu.h>
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
#include <linux/rculist.h>
#include <linux/rcupdate.h>
#include <asm/irqdomain.h>
#include <asm/device.h>
#include <asm/msi.h>
#include <asm/msidef.h>
#define VMD_CFGBAR 0
#define VMD_MEMBAR1 2
#define VMD_MEMBAR2 4
/*
* Lock for manipulating VMD IRQ lists.
*/
static DEFINE_RAW_SPINLOCK(list_lock);
/**
* struct vmd_irq - private data to map driver IRQ to the VMD shared vector
* @node: list item for parent traversal.
* @irq: back pointer to parent.
x86/PCI: VMD: Fix infinite loop executing irq's We can't initialize the list head on deletion as this causes the node to point to itself, which causes an infinite loop if vmd_irq() happens to be servicing that node. The list initialization was trying to fix a bug from multiple calls to disable the same IRQ. Fix this instead by having the VMD driver track if the interrupt is enabled. [bhelgaas: changelog, add "Fixes"] Fixes: 97e923063575 ("x86/PCI: VMD: Initialize list item in IRQ disable") Reported-by: Grzegorz Koczot <grzegorz.koczot@intel.com> Tested-by: Miroslaw Drost <miroslaw.drost@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-08-23 21:36:42 +00:00
* @enabled: true if driver enabled IRQ
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
* @virq: the virtual IRQ value provided to the requesting driver.
*
* Every MSI/MSI-X IRQ requested for a device in a VMD domain will be mapped to
* a VMD IRQ using this structure.
*/
struct vmd_irq {
struct list_head node;
struct vmd_irq_list *irq;
x86/PCI: VMD: Fix infinite loop executing irq's We can't initialize the list head on deletion as this causes the node to point to itself, which causes an infinite loop if vmd_irq() happens to be servicing that node. The list initialization was trying to fix a bug from multiple calls to disable the same IRQ. Fix this instead by having the VMD driver track if the interrupt is enabled. [bhelgaas: changelog, add "Fixes"] Fixes: 97e923063575 ("x86/PCI: VMD: Initialize list item in IRQ disable") Reported-by: Grzegorz Koczot <grzegorz.koczot@intel.com> Tested-by: Miroslaw Drost <miroslaw.drost@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-08-23 21:36:42 +00:00
bool enabled;
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
unsigned int virq;
};
/**
* struct vmd_irq_list - list of driver requested IRQs mapping to a VMD vector
* @irq_list: the list of irq's the VMD one demuxes to.
PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-11 23:08:45 +00:00
* @srcu: SRCU struct for local synchronization.
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
* @count: number of child IRQs assigned to this vector; used to track
* sharing.
*/
struct vmd_irq_list {
struct list_head irq_list;
PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-11 23:08:45 +00:00
struct srcu_struct srcu;
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
unsigned int count;
};
struct vmd_dev {
struct pci_dev *dev;
spinlock_t cfg_lock;
char __iomem *cfgbar;
int msix_count;
struct vmd_irq_list *irqs;
struct pci_sysdata sysdata;
struct resource resources[3];
struct irq_domain *irq_domain;
struct pci_bus *bus;
#ifdef CONFIG_X86_DEV_DMA_OPS
struct dma_map_ops dma_ops;
struct dma_domain dma_domain;
#endif
};
static inline struct vmd_dev *vmd_from_bus(struct pci_bus *bus)
{
return container_of(bus->sysdata, struct vmd_dev, sysdata);
}
x86/PCI: VMD: Eliminate index member from IRQ list Use math to discover the IRQ list index number relative to the IRQ list head. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-09-02 17:53:05 +00:00
static inline unsigned int index_from_irqs(struct vmd_dev *vmd,
struct vmd_irq_list *irqs)
{
return irqs - vmd->irqs;
}
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
/*
* Drivers managing a device in a VMD domain allocate their own IRQs as before,
* but the MSI entry for the hardware it's driving will be programmed with a
* destination ID for the VMD MSI-X table. The VMD muxes interrupts in its
* domain into one of its own, and the VMD driver de-muxes these for the
* handlers sharing that VMD IRQ. The vmd irq_domain provides the operations
* and irq_chip to set this up.
*/
static void vmd_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
struct vmd_irq *vmdirq = data->chip_data;
struct vmd_irq_list *irq = vmdirq->irq;
x86/PCI: VMD: Eliminate index member from IRQ list Use math to discover the IRQ list index number relative to the IRQ list head. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-09-02 17:53:05 +00:00
struct vmd_dev *vmd = irq_data_get_irq_handler_data(data);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
msg->address_hi = MSI_ADDR_BASE_HI;
x86/PCI: VMD: Eliminate index member from IRQ list Use math to discover the IRQ list index number relative to the IRQ list head. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-09-02 17:53:05 +00:00
msg->address_lo = MSI_ADDR_BASE_LO |
MSI_ADDR_DEST_ID(index_from_irqs(vmd, irq));
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
msg->data = 0;
}
/*
* We rely on MSI_FLAG_USE_DEF_CHIP_OPS to set the IRQ mask/unmask ops.
*/
static void vmd_irq_enable(struct irq_data *data)
{
struct vmd_irq *vmdirq = data->chip_data;
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
unsigned long flags;
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
raw_spin_lock_irqsave(&list_lock, flags);
x86/PCI: VMD: Fix infinite loop executing irq's We can't initialize the list head on deletion as this causes the node to point to itself, which causes an infinite loop if vmd_irq() happens to be servicing that node. The list initialization was trying to fix a bug from multiple calls to disable the same IRQ. Fix this instead by having the VMD driver track if the interrupt is enabled. [bhelgaas: changelog, add "Fixes"] Fixes: 97e923063575 ("x86/PCI: VMD: Initialize list item in IRQ disable") Reported-by: Grzegorz Koczot <grzegorz.koczot@intel.com> Tested-by: Miroslaw Drost <miroslaw.drost@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-08-23 21:36:42 +00:00
WARN_ON(vmdirq->enabled);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
list_add_tail_rcu(&vmdirq->node, &vmdirq->irq->irq_list);
x86/PCI: VMD: Fix infinite loop executing irq's We can't initialize the list head on deletion as this causes the node to point to itself, which causes an infinite loop if vmd_irq() happens to be servicing that node. The list initialization was trying to fix a bug from multiple calls to disable the same IRQ. Fix this instead by having the VMD driver track if the interrupt is enabled. [bhelgaas: changelog, add "Fixes"] Fixes: 97e923063575 ("x86/PCI: VMD: Initialize list item in IRQ disable") Reported-by: Grzegorz Koczot <grzegorz.koczot@intel.com> Tested-by: Miroslaw Drost <miroslaw.drost@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-08-23 21:36:42 +00:00
vmdirq->enabled = true;
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
raw_spin_unlock_irqrestore(&list_lock, flags);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
data->chip->irq_unmask(data);
}
static void vmd_irq_disable(struct irq_data *data)
{
struct vmd_irq *vmdirq = data->chip_data;
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
unsigned long flags;
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
data->chip->irq_mask(data);
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
raw_spin_lock_irqsave(&list_lock, flags);
x86/PCI: VMD: Fix infinite loop executing irq's We can't initialize the list head on deletion as this causes the node to point to itself, which causes an infinite loop if vmd_irq() happens to be servicing that node. The list initialization was trying to fix a bug from multiple calls to disable the same IRQ. Fix this instead by having the VMD driver track if the interrupt is enabled. [bhelgaas: changelog, add "Fixes"] Fixes: 97e923063575 ("x86/PCI: VMD: Initialize list item in IRQ disable") Reported-by: Grzegorz Koczot <grzegorz.koczot@intel.com> Tested-by: Miroslaw Drost <miroslaw.drost@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-08-23 21:36:42 +00:00
if (vmdirq->enabled) {
list_del_rcu(&vmdirq->node);
vmdirq->enabled = false;
}
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
raw_spin_unlock_irqrestore(&list_lock, flags);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
}
/*
* XXX: Stubbed until we develop acceptable way to not create conflicts with
* other devices sharing the same vector.
*/
static int vmd_irq_set_affinity(struct irq_data *data,
const struct cpumask *dest, bool force)
{
return -EINVAL;
}
static struct irq_chip vmd_msi_controller = {
.name = "VMD-MSI",
.irq_enable = vmd_irq_enable,
.irq_disable = vmd_irq_disable,
.irq_compose_msi_msg = vmd_compose_msi_msg,
.irq_set_affinity = vmd_irq_set_affinity,
};
static irq_hw_number_t vmd_get_hwirq(struct msi_domain_info *info,
msi_alloc_info_t *arg)
{
return 0;
}
/*
* XXX: We can be even smarter selecting the best IRQ once we solve the
* affinity problem.
*/
x86/PCI: VMD: Separate MSI and MSI-X vector sharing Child devices in a VMD domain that want to use MSI are slowing down MSI-X using devices sharing the same vectors. Move all MSI usage to a single VMD vector, and MSI-X devices can share the rest. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jon Derrick <jonathan.derrick@intel.com>
2016-06-20 15:39:53 +00:00
static struct vmd_irq_list *vmd_next_irq(struct vmd_dev *vmd, struct msi_desc *desc)
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
{
x86/PCI: VMD: Separate MSI and MSI-X vector sharing Child devices in a VMD domain that want to use MSI are slowing down MSI-X using devices sharing the same vectors. Move all MSI usage to a single VMD vector, and MSI-X devices can share the rest. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jon Derrick <jonathan.derrick@intel.com>
2016-06-20 15:39:53 +00:00
int i, best = 1;
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
unsigned long flags;
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
PCI: vmd: Assign vector zero to all bridges We don't want slower IRQ handlers impacting faster devices that happen to be assigned the same VMD interrupt vector. The driver was trying to separate such devices by checking if MSI-X wasn't used, but really we just don't want endpoint devices to share with bridges. Most bridges may use MSI currently, so that criteria happened to work, but newer ones may use MSI-X, so this patch explicitly checks the device type when choosing a vector. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-20 23:33:54 +00:00
if (pci_is_bridge(msi_desc_to_pci_dev(desc)) || vmd->msix_count == 1)
x86/PCI: VMD: Separate MSI and MSI-X vector sharing Child devices in a VMD domain that want to use MSI are slowing down MSI-X using devices sharing the same vectors. Move all MSI usage to a single VMD vector, and MSI-X devices can share the rest. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jon Derrick <jonathan.derrick@intel.com>
2016-06-20 15:39:53 +00:00
return &vmd->irqs[0];
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
raw_spin_lock_irqsave(&list_lock, flags);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
for (i = 1; i < vmd->msix_count; i++)
if (vmd->irqs[i].count < vmd->irqs[best].count)
best = i;
vmd->irqs[best].count++;
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
raw_spin_unlock_irqrestore(&list_lock, flags);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
return &vmd->irqs[best];
}
static int vmd_msi_init(struct irq_domain *domain, struct msi_domain_info *info,
unsigned int virq, irq_hw_number_t hwirq,
msi_alloc_info_t *arg)
{
x86/PCI: VMD: Separate MSI and MSI-X vector sharing Child devices in a VMD domain that want to use MSI are slowing down MSI-X using devices sharing the same vectors. Move all MSI usage to a single VMD vector, and MSI-X devices can share the rest. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jon Derrick <jonathan.derrick@intel.com>
2016-06-20 15:39:53 +00:00
struct msi_desc *desc = arg->desc;
struct vmd_dev *vmd = vmd_from_bus(msi_desc_to_pci_dev(desc)->bus);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
struct vmd_irq *vmdirq = kzalloc(sizeof(*vmdirq), GFP_KERNEL);
x86/PCI: VMD: Eliminate index member from IRQ list Use math to discover the IRQ list index number relative to the IRQ list head. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-09-02 17:53:05 +00:00
unsigned int index, vector;
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
if (!vmdirq)
return -ENOMEM;
INIT_LIST_HEAD(&vmdirq->node);
x86/PCI: VMD: Separate MSI and MSI-X vector sharing Child devices in a VMD domain that want to use MSI are slowing down MSI-X using devices sharing the same vectors. Move all MSI usage to a single VMD vector, and MSI-X devices can share the rest. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jon Derrick <jonathan.derrick@intel.com>
2016-06-20 15:39:53 +00:00
vmdirq->irq = vmd_next_irq(vmd, desc);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
vmdirq->virq = virq;
x86/PCI: VMD: Eliminate index member from IRQ list Use math to discover the IRQ list index number relative to the IRQ list head. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-09-02 17:53:05 +00:00
index = index_from_irqs(vmd, vmdirq->irq);
vector = pci_irq_vector(vmd->dev, index);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
x86/PCI: VMD: Eliminate index member from IRQ list Use math to discover the IRQ list index number relative to the IRQ list head. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-09-02 17:53:05 +00:00
irq_domain_set_info(domain, virq, vector, info->chip, vmdirq,
x86/PCI: VMD: Eliminate vmd_vector member from list type Eliminate unused vmd and vector members from vmd_irq_list and discover the vector using pci_irq_vector(). Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-09-02 17:53:04 +00:00
handle_untracked_irq, vmd, NULL);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
return 0;
}
static void vmd_msi_free(struct irq_domain *domain,
struct msi_domain_info *info, unsigned int virq)
{
struct vmd_irq *vmdirq = irq_get_chip_data(virq);
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
unsigned long flags;
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-11 23:08:45 +00:00
synchronize_srcu(&vmdirq->irq->srcu);
x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs Fix a potential race when disabling MSI/MSI-X on a VMD domain device. If the VMD interrupt service is running, it may see a disabled IRQ. We can synchronize RCU just before freeing the MSI descriptor. This is safe since the irq_desc lock isn't held, and the descriptor is valid even though it is disabled. After vmd_msi_free(), though, the handler is reinitialized to handle_bad_irq(), so we can't let the VMD ISR's list iteration see the disabled IRQ after this. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-08-04 22:09:09 +00:00
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
/* XXX: Potential optimization to rebalance */
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
raw_spin_lock_irqsave(&list_lock, flags);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
vmdirq->irq->count--;
x86/PCI: VMD: Use lock save/restore in interrupt enable path Enabling interrupts may result in an interrupt raised and serviced while VMD holds a lock, resulting in contention with the spin lock held while enabling interrupts. The solution is to disable preemption and save/restore the state during interrupt enable and disable. Fixes lockdep: ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.6.0-2016-06-16-lockdep+ #47 Tainted: G E ------------------------------------------------------ kworker/0:1/447 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (list_lock){+.+...}, at: [<ffffffffa04eb8fc>] vmd_irq_enable+0x3c/0x70 [vmd] and this task is already holding: (&irq_desc_lock_class){-.-...}, at: [<ffffffff810e1ff6>] __setup_irq+0xa6/0x610 which would create a new lock dependency: (&irq_desc_lock_class){-.-...} -> (list_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&irq_desc_lock_class){-.-...} ... which became HARDIRQ-irq-safe at: [<ffffffff810c9f21>] __lock_acquire+0x981/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffff810e36d4>] handle_level_irq+0x24/0x110 [<ffffffff8101f20a>] handle_irq+0x1a/0x30 [<ffffffff81675fc1>] do_IRQ+0x61/0x120 [<ffffffff8167404c>] ret_from_intr+0x0/0x20 [<ffffffff81672e30>] _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffff810e21ee>] __setup_irq+0x29e/0x610 [<ffffffff810e25a1>] setup_irq+0x41/0x90 [<ffffffff81f5777f>] setup_default_timer_irq+0x1e/0x20 [<ffffffff81f57798>] hpet_time_init+0x17/0x19 [<ffffffff81f5775a>] x86_late_time_init+0xa/0x11 [<ffffffff81f51e9b>] start_kernel+0x382/0x436 [<ffffffff81f51308>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f51445>] x86_64_start_kernel+0x13b/0x14a to a HARDIRQ-irq-unsafe lock: (list_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<ffffffff810c9d8e>] __lock_acquire+0x7ee/0xe00 [<ffffffff810cb039>] lock_acquire+0x119/0x220 [<ffffffff8167294d>] _raw_spin_lock+0x3d/0x80 [<ffffffffa04eba42>] vmd_msi_init+0x72/0x150 [vmd] [<ffffffff810e8597>] msi_domain_alloc+0xb7/0x140 [<ffffffff810e6b10>] irq_domain_alloc_irqs_recursive+0x40/0xa0 [<ffffffff810e6cea>] __irq_domain_alloc_irqs+0x14a/0x330 [<ffffffff810e8a8c>] msi_domain_alloc_irqs+0x8c/0x1d0 [<ffffffff813ca4e3>] pci_msi_setup_msi_irqs+0x43/0x70 [<ffffffff813cada1>] pci_enable_msi_range+0x131/0x280 [<ffffffff813bf5e0>] pcie_port_device_register+0x320/0x4e0 [<ffffffff813bf9a4>] pcie_portdrv_probe+0x34/0x60 [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff813b226b>] pci_device_probe+0xdb/0x130 [<ffffffff8149e3cc>] driver_probe_device+0x22c/0x440 [<ffffffff8149e774>] __device_attach_driver+0x94/0x110 [<ffffffff8149bfad>] bus_for_each_drv+0x5d/0x90 [<ffffffff8149e030>] __device_attach+0xc0/0x140 [<ffffffff8149e0c0>] device_attach+0x10/0x20 [<ffffffff813a77f7>] pci_bus_add_device+0x47/0x90 [<ffffffff813a7879>] pci_bus_add_devices+0x39/0x70 [<ffffffff813aaba7>] pci_rescan_bus+0x27/0x30 [<ffffffffa04ec1af>] vmd_probe+0x68f/0x76c [vmd] [<ffffffff813b0e85>] local_pci_probe+0x45/0xa0 [<ffffffff81088064>] work_for_cpu_fn+0x14/0x20 [<ffffffff8108c244>] process_one_work+0x1f4/0x740 [<ffffffff8108c9c6>] worker_thread+0x236/0x4f0 [<ffffffff810935c2>] kthread+0xf2/0x110 [<ffffffff816738f2>] ret_from_fork+0x22/0x50 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(list_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(list_lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-06-20 15:39:51 +00:00
raw_spin_unlock_irqrestore(&list_lock, flags);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-11 23:08:45 +00:00
kfree(vmdirq);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
}
static int vmd_msi_prepare(struct irq_domain *domain, struct device *dev,
int nvec, msi_alloc_info_t *arg)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct vmd_dev *vmd = vmd_from_bus(pdev->bus);
if (nvec > vmd->msix_count)
return vmd->msix_count;
memset(arg, 0, sizeof(*arg));
return 0;
}
static void vmd_set_desc(msi_alloc_info_t *arg, struct msi_desc *desc)
{
arg->desc = desc;
}
static struct msi_domain_ops vmd_msi_domain_ops = {
.get_hwirq = vmd_get_hwirq,
.msi_init = vmd_msi_init,
.msi_free = vmd_msi_free,
.msi_prepare = vmd_msi_prepare,
.set_desc = vmd_set_desc,
};
static struct msi_domain_info vmd_msi_domain_info = {
.flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
MSI_FLAG_PCI_MSIX,
.ops = &vmd_msi_domain_ops,
.chip = &vmd_msi_controller,
};
#ifdef CONFIG_X86_DEV_DMA_OPS
/*
* VMD replaces the requester ID with its own. DMA mappings for devices in a
* VMD domain need to be mapped for the VMD, not the device requiring
* the mapping.
*/
static struct device *to_vmd_dev(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct vmd_dev *vmd = vmd_from_bus(pdev->bus);
return &vmd->dev->dev;
}
treewide: Constify most dma_map_ops structures Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-20 21:04:01 +00:00
static const struct dma_map_ops *vmd_dma_ops(struct device *dev)
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
{
x86/PCI: VMD: Select device dma ops to override VMD device doesn't usually have device archdata specific dma_ops, so we need to override the default ops for VMD devices. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-05-17 17:13:24 +00:00
return get_dma_ops(to_vmd_dev(dev));
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
}
static void *vmd_alloc(struct device *dev, size_t size, dma_addr_t *addr,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
gfp_t flag, unsigned long attrs)
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
{
return vmd_dma_ops(dev)->alloc(to_vmd_dev(dev), size, addr, flag,
attrs);
}
static void vmd_free(struct device *dev, size_t size, void *vaddr,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
dma_addr_t addr, unsigned long attrs)
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
{
return vmd_dma_ops(dev)->free(to_vmd_dev(dev), size, vaddr, addr,
attrs);
}
static int vmd_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t addr, size_t size,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
unsigned long attrs)
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
{
return vmd_dma_ops(dev)->mmap(to_vmd_dev(dev), vma, cpu_addr, addr,
size, attrs);
}
static int vmd_get_sgtable(struct device *dev, struct sg_table *sgt,
void *cpu_addr, dma_addr_t addr, size_t size,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
unsigned long attrs)
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
{
return vmd_dma_ops(dev)->get_sgtable(to_vmd_dev(dev), sgt, cpu_addr,
addr, size, attrs);
}
static dma_addr_t vmd_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction dir,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
unsigned long attrs)
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
{
return vmd_dma_ops(dev)->map_page(to_vmd_dev(dev), page, offset, size,
dir, attrs);
}
static void vmd_unmap_page(struct device *dev, dma_addr_t addr, size_t size,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
enum dma_data_direction dir, unsigned long attrs)
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
{
vmd_dma_ops(dev)->unmap_page(to_vmd_dev(dev), addr, size, dir, attrs);
}
static int vmd_map_sg(struct device *dev, struct scatterlist *sg, int nents,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
enum dma_data_direction dir, unsigned long attrs)
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
{
return vmd_dma_ops(dev)->map_sg(to_vmd_dev(dev), sg, nents, dir, attrs);
}
static void vmd_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
dma-mapping: use unsigned long for dma_attrs The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 20:46:00 +00:00
enum dma_data_direction dir, unsigned long attrs)
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
{
vmd_dma_ops(dev)->unmap_sg(to_vmd_dev(dev), sg, nents, dir, attrs);
}
static void vmd_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
size_t size, enum dma_data_direction dir)
{
vmd_dma_ops(dev)->sync_single_for_cpu(to_vmd_dev(dev), addr, size, dir);
}
static void vmd_sync_single_for_device(struct device *dev, dma_addr_t addr,
size_t size, enum dma_data_direction dir)
{
vmd_dma_ops(dev)->sync_single_for_device(to_vmd_dev(dev), addr, size,
dir);
}
static void vmd_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction dir)
{
vmd_dma_ops(dev)->sync_sg_for_cpu(to_vmd_dev(dev), sg, nents, dir);
}
static void vmd_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction dir)
{
vmd_dma_ops(dev)->sync_sg_for_device(to_vmd_dev(dev), sg, nents, dir);
}
static int vmd_mapping_error(struct device *dev, dma_addr_t addr)
{
return vmd_dma_ops(dev)->mapping_error(to_vmd_dev(dev), addr);
}
static int vmd_dma_supported(struct device *dev, u64 mask)
{
return vmd_dma_ops(dev)->dma_supported(to_vmd_dev(dev), mask);
}
#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
static u64 vmd_get_required_mask(struct device *dev)
{
return vmd_dma_ops(dev)->get_required_mask(to_vmd_dev(dev));
}
#endif
static void vmd_teardown_dma_ops(struct vmd_dev *vmd)
{
struct dma_domain *domain = &vmd->dma_domain;
x86/PCI: VMD: Select device dma ops to override VMD device doesn't usually have device archdata specific dma_ops, so we need to override the default ops for VMD devices. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-05-17 17:13:24 +00:00
if (get_dma_ops(&vmd->dev->dev))
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
del_dma_domain(domain);
}
#define ASSIGN_VMD_DMA_OPS(source, dest, fn) \
do { \
if (source->fn) \
dest->fn = vmd_##fn; \
} while (0)
static void vmd_setup_dma_ops(struct vmd_dev *vmd)
{
x86/PCI: VMD: Select device dma ops to override VMD device doesn't usually have device archdata specific dma_ops, so we need to override the default ops for VMD devices. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-05-17 17:13:24 +00:00
const struct dma_map_ops *source = get_dma_ops(&vmd->dev->dev);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
struct dma_map_ops *dest = &vmd->dma_ops;
struct dma_domain *domain = &vmd->dma_domain;
domain->domain_nr = vmd->sysdata.domain;
domain->dma_ops = dest;
if (!source)
return;
ASSIGN_VMD_DMA_OPS(source, dest, alloc);
ASSIGN_VMD_DMA_OPS(source, dest, free);
ASSIGN_VMD_DMA_OPS(source, dest, mmap);
ASSIGN_VMD_DMA_OPS(source, dest, get_sgtable);
ASSIGN_VMD_DMA_OPS(source, dest, map_page);
ASSIGN_VMD_DMA_OPS(source, dest, unmap_page);
ASSIGN_VMD_DMA_OPS(source, dest, map_sg);
ASSIGN_VMD_DMA_OPS(source, dest, unmap_sg);
ASSIGN_VMD_DMA_OPS(source, dest, sync_single_for_cpu);
ASSIGN_VMD_DMA_OPS(source, dest, sync_single_for_device);
ASSIGN_VMD_DMA_OPS(source, dest, sync_sg_for_cpu);
ASSIGN_VMD_DMA_OPS(source, dest, sync_sg_for_device);
ASSIGN_VMD_DMA_OPS(source, dest, mapping_error);
ASSIGN_VMD_DMA_OPS(source, dest, dma_supported);
#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
ASSIGN_VMD_DMA_OPS(source, dest, get_required_mask);
#endif
add_dma_domain(domain);
}
#undef ASSIGN_VMD_DMA_OPS
#else
static void vmd_teardown_dma_ops(struct vmd_dev *vmd) {}
static void vmd_setup_dma_ops(struct vmd_dev *vmd) {}
#endif
static char __iomem *vmd_cfg_addr(struct vmd_dev *vmd, struct pci_bus *bus,
unsigned int devfn, int reg, int len)
{
char __iomem *addr = vmd->cfgbar +
(bus->number << 20) + (devfn << 12) + reg;
if ((addr - vmd->cfgbar) + len >=
resource_size(&vmd->dev->resource[VMD_CFGBAR]))
return NULL;
return addr;
}
/*
* CPU may deadlock if config space is not serialized on some versions of this
* hardware, so all config space access is done under a spinlock.
*/
static int vmd_pci_read(struct pci_bus *bus, unsigned int devfn, int reg,
int len, u32 *value)
{
struct vmd_dev *vmd = vmd_from_bus(bus);
char __iomem *addr = vmd_cfg_addr(vmd, bus, devfn, reg, len);
unsigned long flags;
int ret = 0;
if (!addr)
return -EFAULT;
spin_lock_irqsave(&vmd->cfg_lock, flags);
switch (len) {
case 1:
*value = readb(addr);
break;
case 2:
*value = readw(addr);
break;
case 4:
*value = readl(addr);
break;
default:
ret = -EINVAL;
break;
}
spin_unlock_irqrestore(&vmd->cfg_lock, flags);
return ret;
}
/*
* VMD h/w converts non-posted config writes to posted memory writes. The
* read-back in this function forces the completion so it returns only after
* the config space was written, as expected.
*/
static int vmd_pci_write(struct pci_bus *bus, unsigned int devfn, int reg,
int len, u32 value)
{
struct vmd_dev *vmd = vmd_from_bus(bus);
char __iomem *addr = vmd_cfg_addr(vmd, bus, devfn, reg, len);
unsigned long flags;
int ret = 0;
if (!addr)
return -EFAULT;
spin_lock_irqsave(&vmd->cfg_lock, flags);
switch (len) {
case 1:
writeb(value, addr);
readb(addr);
break;
case 2:
writew(value, addr);
readw(addr);
break;
case 4:
writel(value, addr);
readl(addr);
break;
default:
ret = -EINVAL;
break;
}
spin_unlock_irqrestore(&vmd->cfg_lock, flags);
return ret;
}
static struct pci_ops vmd_ops = {
.read = vmd_pci_read,
.write = vmd_pci_write,
};
x86/PCI: VMD: Attach VMD resources to parent domain's resource tree Attach the new VMD domain's resources to the VMD device's resources. This allows /proc/iomem to display a more complete picture. Before: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2010000-c2013fff : nvme c4000000-c40fffff : 0000:5d:05.5 After: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2000000-c3ffffff : VMD MEMBAR1 c2000000-c22fffff : PCI Bus 10000:01 c2000000-c200ffff : 10000:01:00.0 c2010000-c2013fff : 10000:01:00.0 c2010000-c2013fff : nvme c2300000-c24fffff : PCI Bus 10000:01 c4000000-c40fffff : 0000:5d:05.5 c4002000-c40fffff : VMD MEMBAR2 Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-02-24 17:06:37 +00:00
static void vmd_attach_resources(struct vmd_dev *vmd)
{
vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1];
vmd->dev->resource[VMD_MEMBAR2].child = &vmd->resources[2];
}
static void vmd_detach_resources(struct vmd_dev *vmd)
{
vmd->dev->resource[VMD_MEMBAR1].child = NULL;
vmd->dev->resource[VMD_MEMBAR2].child = NULL;
}
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
/*
PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 VMD domains are allocated starting at 0x10000, not 0x1000 as the comment said. Correct the comment and add a reference to the ACPI spec for _SEG. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-06-19 20:26:57 +00:00
* VMD domains start at 0x10000 to not clash with ACPI _SEG domains.
* Per ACPI r6.0, sec 6.5.6, _SEG returns an integer, of which the lower
* 16 bits are the PCI Segment Group (domain) number. Other bits are
* currently reserved.
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
*/
static int vmd_find_free_domain(void)
{
int domain = 0xffff;
struct pci_bus *bus = NULL;
while ((bus = pci_find_next_bus(bus)) != NULL)
domain = max_t(int, domain, pci_domain_nr(bus));
return domain + 1;
}
static int vmd_enable_domain(struct vmd_dev *vmd)
{
struct pci_sysdata *sd = &vmd->sysdata;
PCI/vmd: Create named irq domain Use the fwnode to create a named domain so diagnosis works. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.379861978@linutronix.de
2017-06-19 23:37:15 +00:00
struct fwnode_handle *fn;
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
struct resource *res;
u32 upper_bits;
unsigned long flags;
LIST_HEAD(resources);
res = &vmd->dev->resource[VMD_CFGBAR];
vmd->resources[0] = (struct resource) {
.name = "VMD CFGBAR",
x86/PCI: VMD: Set bus resource start to 0 The bus always starts at 0. Due to alignment and down-casting, this happened to work before, but looked alarmingly incorrect in kernel logs. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-02 22:31:04 +00:00
.start = 0,
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
.end = (resource_size(res) >> 20) - 1,
.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
};
x86/PCI: VMD: Document code for maintainability Comment the less obvious portion of the code for setting up memory windows, and the platform dependency for initializing the h/w with appropriate resources. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-02 22:31:03 +00:00
/*
* If the window is below 4GB, clear IORESOURCE_MEM_64 so we can
* put 32-bit resources in the window.
*
* There's no hardware reason why a 64-bit window *couldn't*
* contain a 32-bit resource, but pbus_size_mem() computes the
* bridge window size assuming a 64-bit window will contain no
* 32-bit resources. __pci_assign_resource() enforces that
* artificial restriction to make sure everything will fit.
*
* The only way we could use a 64-bit non-prefechable MEMBAR is
* if its address is <4GB so that we can convert it to a 32-bit
* resource. To be visible to the host OS, all VMD endpoints must
* be initially configured by platform BIOS, which includes setting
* up these resources. We can assume the device is configured
* according to the platform needs.
*/
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
res = &vmd->dev->resource[VMD_MEMBAR1];
upper_bits = upper_32_bits(res->end);
flags = res->flags & ~IORESOURCE_SIZEALIGN;
if (!upper_bits)
flags &= ~IORESOURCE_MEM_64;
vmd->resources[1] = (struct resource) {
.name = "VMD MEMBAR1",
.start = res->start,
.end = res->end,
.flags = flags,
x86/PCI: VMD: Attach VMD resources to parent domain's resource tree Attach the new VMD domain's resources to the VMD device's resources. This allows /proc/iomem to display a more complete picture. Before: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2010000-c2013fff : nvme c4000000-c40fffff : 0000:5d:05.5 After: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2000000-c3ffffff : VMD MEMBAR1 c2000000-c22fffff : PCI Bus 10000:01 c2000000-c200ffff : 10000:01:00.0 c2010000-c2013fff : 10000:01:00.0 c2010000-c2013fff : nvme c2300000-c24fffff : PCI Bus 10000:01 c4000000-c40fffff : 0000:5d:05.5 c4002000-c40fffff : VMD MEMBAR2 Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-02-24 17:06:37 +00:00
.parent = res,
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
};
res = &vmd->dev->resource[VMD_MEMBAR2];
upper_bits = upper_32_bits(res->end);
flags = res->flags & ~IORESOURCE_SIZEALIGN;
if (!upper_bits)
flags &= ~IORESOURCE_MEM_64;
vmd->resources[2] = (struct resource) {
.name = "VMD MEMBAR2",
.start = res->start + 0x2000,
.end = res->end,
.flags = flags,
x86/PCI: VMD: Attach VMD resources to parent domain's resource tree Attach the new VMD domain's resources to the VMD device's resources. This allows /proc/iomem to display a more complete picture. Before: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2010000-c2013fff : nvme c4000000-c40fffff : 0000:5d:05.5 After: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2000000-c3ffffff : VMD MEMBAR1 c2000000-c22fffff : PCI Bus 10000:01 c2000000-c200ffff : 10000:01:00.0 c2010000-c2013fff : 10000:01:00.0 c2010000-c2013fff : nvme c2300000-c24fffff : PCI Bus 10000:01 c4000000-c40fffff : 0000:5d:05.5 c4002000-c40fffff : VMD MEMBAR2 Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-02-24 17:06:37 +00:00
.parent = res,
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
};
x86/PCI: VMD: Request userspace control of PCIe hotplug indicators Add set_dev_domain_options() to set PCI domain-specific options as devices are added. The first usage is to request exclusive userspace control of PCIe hotplug indicators in VMD domains. Devices in a VMD domain use PCIe hotplug Attention and Power Indicators in a non-standard way; tell pciehp to ignore the indicators so userspace can control them via the sysfs "attention" file. To determine whether a bus is within a VMD domain, add a bool to the pci_sysdata structure that the VMD driver sets during initialization. [bhelgaas: changelog] Requested-by: Kapil Karkra <kapil.karkra@intel.com> Tested-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-13 15:05:40 +00:00
sd->vmd_domain = true;
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
sd->domain = vmd_find_free_domain();
if (sd->domain < 0)
return sd->domain;
sd->node = pcibus_to_node(vmd->dev->bus);
PCI/vmd: Create named irq domain Use the fwnode to create a named domain so diagnosis works. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.379861978@linutronix.de
2017-06-19 23:37:15 +00:00
fn = irq_domain_alloc_named_id_fwnode("VMD-MSI", vmd->sysdata.domain);
if (!fn)
return -ENODEV;
vmd->irq_domain = pci_msi_create_irq_domain(fn, &vmd_msi_domain_info,
x86/PCI: VMD: Use x86_vector_domain as parent domain Otherwise APIC code assumes VMD's IRQ domain can be managed by the APIC, resulting in an invalid cast of irq_data during irq_force_complete_move(). Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-20 15:39:52 +00:00
x86_vector_domain);
PCI/vmd: Create named irq domain Use the fwnode to create a named domain so diagnosis works. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.379861978@linutronix.de
2017-06-19 23:37:15 +00:00
irq_domain_free_fwnode(fn);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
if (!vmd->irq_domain)
return -ENODEV;
pci_add_resource(&resources, &vmd->resources[0]);
pci_add_resource(&resources, &vmd->resources[1]);
pci_add_resource(&resources, &vmd->resources[2]);
vmd->bus = pci_create_root_bus(&vmd->dev->dev, 0, &vmd_ops, sd,
&resources);
if (!vmd->bus) {
pci_free_resource_list(&resources);
irq_domain_remove(vmd->irq_domain);
return -ENODEV;
}
x86/PCI: VMD: Attach VMD resources to parent domain's resource tree Attach the new VMD domain's resources to the VMD device's resources. This allows /proc/iomem to display a more complete picture. Before: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2010000-c2013fff : nvme c4000000-c40fffff : 0000:5d:05.5 After: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2000000-c3ffffff : VMD MEMBAR1 c2000000-c22fffff : PCI Bus 10000:01 c2000000-c200ffff : 10000:01:00.0 c2010000-c2013fff : 10000:01:00.0 c2010000-c2013fff : nvme c2300000-c24fffff : PCI Bus 10000:01 c4000000-c40fffff : 0000:5d:05.5 c4002000-c40fffff : VMD MEMBAR2 Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-02-24 17:06:37 +00:00
vmd_attach_resources(vmd);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
vmd_setup_dma_ops(vmd);
dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
pci_rescan_bus(vmd->bus);
WARN(sysfs_create_link(&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,
"domain"), "Can't create symlink to domain\n");
return 0;
}
static irqreturn_t vmd_irq(int irq, void *data)
{
struct vmd_irq_list *irqs = data;
struct vmd_irq *vmdirq;
PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-11 23:08:45 +00:00
int idx;
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-11 23:08:45 +00:00
idx = srcu_read_lock(&irqs->srcu);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
list_for_each_entry_rcu(vmdirq, &irqs->irq_list, node)
generic_handle_irq(vmdirq->virq);
PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-11 23:08:45 +00:00
srcu_read_unlock(&irqs->srcu, idx);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
return IRQ_HANDLED;
}
static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct vmd_dev *vmd;
int i, err;
if (resource_size(&dev->resource[VMD_CFGBAR]) < (1 << 20))
return -ENOMEM;
vmd = devm_kzalloc(&dev->dev, sizeof(*vmd), GFP_KERNEL);
if (!vmd)
return -ENOMEM;
vmd->dev = dev;
err = pcim_enable_device(dev);
if (err < 0)
return err;
vmd->cfgbar = pcim_iomap(dev, VMD_CFGBAR, 0);
if (!vmd->cfgbar)
return -ENOMEM;
pci_set_master(dev);
if (dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(64)) &&
dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)))
return -ENODEV;
vmd->msix_count = pci_msix_vec_count(dev);
if (vmd->msix_count < 0)
return -ENODEV;
PCI: vmd: Remove IRQ affinity so we can allocate more IRQs VMD hardware has to share its vectors among child devices in its PCI domain so we should allocate as many as possible rather than just ones that can be affinitized. pci_alloc_irq_vectors_affinity() limits the number of affinitized IRQs to the number of present CPUs (see irq_calc_affinity_vectors()). But we'd prefer to have more vectors, even if they aren't distributed across the CPUs, so use pci_alloc_irq_vectors() instead. Reported-by: Brad Goodman <Bradley.Goodman@dell.com> Signed-off-by: Keith Busch <keith.busch@intel.com> [bhelgaas: add irq_calc_affinity_vectors() reference to changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-30 16:15:04 +00:00
vmd->msix_count = pci_alloc_irq_vectors(dev, 1, vmd->msix_count,
PCI_IRQ_MSIX);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
if (vmd->msix_count < 0)
return vmd->msix_count;
vmd->irqs = devm_kcalloc(&dev->dev, vmd->msix_count, sizeof(*vmd->irqs),
GFP_KERNEL);
if (!vmd->irqs)
return -ENOMEM;
for (i = 0; i < vmd->msix_count; i++) {
PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-11 23:08:45 +00:00
err = init_srcu_struct(&vmd->irqs[i].srcu);
if (err)
return err;
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
INIT_LIST_HEAD(&vmd->irqs[i].irq_list);
x86/PCI: VMD: Eliminate vmd_vector member from list type Eliminate unused vmd and vector members from vmd_irq_list and discover the vector using pci_irq_vector(). Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2016-09-02 17:53:04 +00:00
err = devm_request_irq(&dev->dev, pci_irq_vector(dev, i),
PCI: host: Mark PCIe/PCI (MSI) cascade ISR as IRQF_NO_THREAD Similar as commit 8ff0ef996ca0 ("PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD"), we should mark PCIe/PCI (MSI) IRQ cascade handlers in designware, qcom, and vmd as IRQF_NO_THREAD explicitly. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> # vmd Acked-by: Jingoo Han <jingoohan1@gmail.com> # pcie-designware-plat.c
2017-04-20 10:27:18 +00:00
vmd_irq, IRQF_NO_THREAD,
"vmd", &vmd->irqs[i]);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
if (err)
return err;
}
spin_lock_init(&vmd->cfg_lock);
pci_set_drvdata(dev, vmd);
err = vmd_enable_domain(vmd);
if (err)
return err;
dev_info(&vmd->dev->dev, "Bound to PCI domain %04x\n",
vmd->sysdata.domain);
return 0;
}
PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-11 23:08:45 +00:00
static void vmd_cleanup_srcu(struct vmd_dev *vmd)
{
int i;
for (i = 0; i < vmd->msix_count; i++)
cleanup_srcu_struct(&vmd->irqs[i].srcu);
}
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
static void vmd_remove(struct pci_dev *dev)
{
struct vmd_dev *vmd = pci_get_drvdata(dev);
x86/PCI: VMD: Attach VMD resources to parent domain's resource tree Attach the new VMD domain's resources to the VMD device's resources. This allows /proc/iomem to display a more complete picture. Before: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2010000-c2013fff : nvme c4000000-c40fffff : 0000:5d:05.5 After: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2000000-c3ffffff : VMD MEMBAR1 c2000000-c22fffff : PCI Bus 10000:01 c2000000-c200ffff : 10000:01:00.0 c2010000-c2013fff : 10000:01:00.0 c2010000-c2013fff : nvme c2300000-c24fffff : PCI Bus 10000:01 c4000000-c40fffff : 0000:5d:05.5 c4002000-c40fffff : VMD MEMBAR2 Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-02-24 17:06:37 +00:00
vmd_detach_resources(vmd);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
sysfs_remove_link(&vmd->dev->dev.kobj, "domain");
pci_stop_root_bus(vmd->bus);
pci_remove_root_bus(vmd->bus);
PCI: vmd: Move SRCU cleanup after bus, child device removal Recent __call_srcu() changes have exposed that we need to cleanup SRCU structures after pci_stop_root_bus() calls into vmd_msi_free(). Fixes: 3906b91844d6 ("PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com> Cc: <stable@vger.kernel.org> # 4.11
2017-06-22 15:15:42 +00:00
vmd_cleanup_srcu(vmd);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
vmd_teardown_dma_ops(vmd);
irq_domain_remove(vmd->irq_domain);
}
PCI: vmd: Fix suspend handlers defined-but-not-used warning Fix the following warnings: drivers/pci/host/vmd.c:731:12: warning: ‘vmd_suspend’ defined but not used [-Wunused-function] static int vmd_suspend(struct device *dev) ^ drivers/pci/host/vmd.c:739:12: warning: ‘vmd_resume’ defined but not used [-Wunused-function] static int vmd_resume(struct device *dev) ^ Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-26 18:29:57 +00:00
#ifdef CONFIG_PM_SLEEP
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
static int vmd_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
PCI: vmd: Free up IRQs on suspend path Free up the IRQs we request on the suspend path and reallocate them on the resume path. Fixes this error: CPU 111 disable failed: CPU has 9 vectors assigned and there are only 0 available. Error taking CPU111 down: -34 Non-boot CPUs are not disabled Enabling non-boot CPUs ... Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2017-08-11 20:54:32 +00:00
struct vmd_dev *vmd = pci_get_drvdata(pdev);
int i;
for (i = 0; i < vmd->msix_count; i++)
devm_free_irq(dev, pci_irq_vector(pdev, i), &vmd->irqs[i]);
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
pci_save_state(pdev);
return 0;
}
static int vmd_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
PCI: vmd: Free up IRQs on suspend path Free up the IRQs we request on the suspend path and reallocate them on the resume path. Fixes this error: CPU 111 disable failed: CPU has 9 vectors assigned and there are only 0 available. Error taking CPU111 down: -34 Non-boot CPUs are not disabled Enabling non-boot CPUs ... Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
2017-08-11 20:54:32 +00:00
struct vmd_dev *vmd = pci_get_drvdata(pdev);
int err, i;
for (i = 0; i < vmd->msix_count; i++) {
err = devm_request_irq(dev, pci_irq_vector(pdev, i),
vmd_irq, IRQF_NO_THREAD,
"vmd", &vmd->irqs[i]);
if (err)
return err;
}
x86/PCI: Add driver for Intel Volume Management Device (VMD) The Intel Volume Management Device (VMD) is a Root Complex Integrated Endpoint that acts as a host bridge to a secondary PCIe domain. BIOS can reassign one or more Root Ports to appear within a VMD domain instead of the primary domain. The immediate benefit is that additional PCIe domains allow more than 256 buses in a system by letting bus numbers be reused across different domains. VMD domains do not define ACPI _SEG, so to avoid domain clashing with host bridges defining this segment, VMD domains start at 0x10000, which is greater than the highest possible 16-bit ACPI defined _SEG. This driver enumerates and enables the domain using the root bus configuration interface provided by the PCI subsystem. The driver provides configuration space accessor functions (pci_ops), bus and memory resources, an MSI IRQ domain with irq_chip implementation, and DMA operations necessary to use devices through the VMD endpoint's interface. VMD routes I/O as follows: 1) Configuration Space: BAR 0 ("CFGBAR") of VMD provides the base address and size for configuration space register access to VMD-owned root ports. It works similarly to MMCONFIG for extended configuration space. Bus numbering is independent and does not conflict with the primary domain. 2) MMIO Space: BARs 2 and 4 ("MEMBAR1" and "MEMBAR2") of VMD provide the base address, size, and type for MMIO register access. These addresses are not translated by VMD hardware; they are simply reservations to be distributed to root ports' memory base/limit registers and subdivided among devices downstream. 3) DMA: To interact appropriately with an IOMMU, the source ID DMA read and write requests are translated to the bus-device-function of the VMD endpoint. Otherwise, DMA operates normally without VMD-specific address translation. 4) Interrupts: Part of VMD's BAR 4 is reserved for VMD's MSI-X Table and PBA. MSIs from VMD domain devices and ports are remapped to appear as if they were issued using one of VMD's MSI-X table entries. Each MSI and MSI-X address of VMD-owned devices and ports has a special format where the address refers to specific entries in the VMD's MSI-X table. As with DMA, the interrupt source ID is translated to VMD's bus-device-function. The driver provides its own MSI and MSI-X configuration functions specific to how MSI messages are used within the VMD domain, and provides an irq_chip for independent IRQ allocation to relay interrupts from VMD's interrupt handler to the appropriate device driver's handler. 5) Errors: PCIe error message are intercepted by the root ports normally (e.g., AER), except with VMD, system errors (i.e., firmware first) are disabled by default. AER and hotplug interrupts are translated in the same way as endpoint interrupts. 6) VMD does not support INTx interrupts or IO ports. Devices or drivers requiring these features should either not be placed below VMD-owned root ports, or VMD should be disabled by BIOS for such endpoints. [bhelgaas: add VMD BAR #defines, factor out vmd_cfg_addr(), rework VMD resource setup, whitespace, changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> (IRQ-related parts)
2016-01-12 20:18:10 +00:00
pci_restore_state(pdev);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(vmd_dev_pm_ops, vmd_suspend, vmd_resume);
static const struct pci_device_id vmd_ids[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x201d),},
{0,}
};
MODULE_DEVICE_TABLE(pci, vmd_ids);
static struct pci_driver vmd_drv = {
.name = "vmd",
.id_table = vmd_ids,
.probe = vmd_probe,
.remove = vmd_remove,
.driver = {
.pm = &vmd_dev_pm_ops,
},
};
module_pci_driver(vmd_drv);
MODULE_AUTHOR("Intel Corporation");
MODULE_LICENSE("GPL v2");
MODULE_VERSION("0.6");
Reference in New Issue Copy Permalink