linux/drivers/media/dvb-frontends/tda10071.c

1320 lines
28 KiB
C
Raw Normal View History

/*
* NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver
*
* Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "tda10071_priv.h"
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 64
static struct dvb_frontend_ops tda10071_ops;
/* write multiple registers */
static int tda10071_wr_regs(struct tda10071_priv *priv, u8 reg, u8 *val,
int len)
{
int ret;
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg.demod_i2c_addr,
.flags = 0,
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
.len = 1 + len,
.buf = buf,
}
};
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
if (1 + len > sizeof(buf)) {
dev_warn(&priv->i2c->dev,
"%s: i2c wr reg=%04x: len=%d is too big!\n",
KBUILD_MODNAME, reg, len);
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
return -EINVAL;
}
buf[0] = reg;
memcpy(&buf[1], val, len);
ret = i2c_transfer(priv->i2c, msg, 1);
if (ret == 1) {
ret = 0;
} else {
dev_warn(&priv->i2c->dev,
"%s: i2c wr failed=%d reg=%02x len=%d\n",
KBUILD_MODNAME, ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* read multiple registers */
static int tda10071_rd_regs(struct tda10071_priv *priv, u8 reg, u8 *val,
int len)
{
int ret;
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[2] = {
{
.addr = priv->cfg.demod_i2c_addr,
.flags = 0,
.len = 1,
.buf = &reg,
}, {
.addr = priv->cfg.demod_i2c_addr,
.flags = I2C_M_RD,
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
.len = len,
.buf = buf,
}
};
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
if (len > sizeof(buf)) {
dev_warn(&priv->i2c->dev,
"%s: i2c wr reg=%04x: len=%d is too big!\n",
KBUILD_MODNAME, reg, len);
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:11:47 +00:00
return -EINVAL;
}
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, buf, len);
ret = 0;
} else {
dev_warn(&priv->i2c->dev,
"%s: i2c rd failed=%d reg=%02x len=%d\n",
KBUILD_MODNAME, ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* write single register */
static int tda10071_wr_reg(struct tda10071_priv *priv, u8 reg, u8 val)
{
return tda10071_wr_regs(priv, reg, &val, 1);
}
/* read single register */
static int tda10071_rd_reg(struct tda10071_priv *priv, u8 reg, u8 *val)
{
return tda10071_rd_regs(priv, reg, val, 1);
}
/* write single register with mask */
static int tda10071_wr_reg_mask(struct tda10071_priv *priv,
u8 reg, u8 val, u8 mask)
{
int ret;
u8 tmp;
/* no need for read if whole reg is written */
if (mask != 0xff) {
ret = tda10071_rd_regs(priv, reg, &tmp, 1);
if (ret)
return ret;
val &= mask;
tmp &= ~mask;
val |= tmp;
}
return tda10071_wr_regs(priv, reg, &val, 1);
}
/* read single register with mask */
static int tda10071_rd_reg_mask(struct tda10071_priv *priv,
u8 reg, u8 *val, u8 mask)
{
int ret, i;
u8 tmp;
ret = tda10071_rd_regs(priv, reg, &tmp, 1);
if (ret)
return ret;
tmp &= mask;
/* find position of the first bit */
for (i = 0; i < 8; i++) {
if ((mask >> i) & 0x01)
break;
}
*val = tmp >> i;
return 0;
}
/* execute firmware command */
static int tda10071_cmd_execute(struct tda10071_priv *priv,
struct tda10071_cmd *cmd)
{
int ret, i;
u8 tmp;
if (!priv->warm) {
ret = -EFAULT;
goto error;
}
/* write cmd and args for firmware */
ret = tda10071_wr_regs(priv, 0x00, cmd->args, cmd->len);
if (ret)
goto error;
/* start cmd execution */
ret = tda10071_wr_reg(priv, 0x1f, 1);
if (ret)
goto error;
/* wait cmd execution terminate */
for (i = 1000, tmp = 1; i && tmp; i--) {
ret = tda10071_rd_reg(priv, 0x1f, &tmp);
if (ret)
goto error;
usleep_range(200, 5000);
}
dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i);
if (i == 0) {
ret = -ETIMEDOUT;
goto error;
}
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_set_tone(struct dvb_frontend *fe,
fe_sec_tone_mode_t fe_sec_tone_mode)
{
struct tda10071_priv *priv = fe->demodulator_priv;
struct tda10071_cmd cmd;
int ret;
u8 tone;
if (!priv->warm) {
ret = -EFAULT;
goto error;
}
dev_dbg(&priv->i2c->dev, "%s: tone_mode=%d\n", __func__,
fe_sec_tone_mode);
switch (fe_sec_tone_mode) {
case SEC_TONE_ON:
tone = 1;
break;
case SEC_TONE_OFF:
tone = 0;
break;
default:
dev_dbg(&priv->i2c->dev, "%s: invalid fe_sec_tone_mode\n",
__func__);
ret = -EINVAL;
goto error;
}
cmd.args[0] = CMD_LNB_PCB_CONFIG;
cmd.args[1] = 0;
cmd.args[2] = 0x00;
cmd.args[3] = 0x00;
cmd.args[4] = tone;
cmd.len = 5;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_set_voltage(struct dvb_frontend *fe,
fe_sec_voltage_t fe_sec_voltage)
{
struct tda10071_priv *priv = fe->demodulator_priv;
struct tda10071_cmd cmd;
int ret;
u8 voltage;
if (!priv->warm) {
ret = -EFAULT;
goto error;
}
dev_dbg(&priv->i2c->dev, "%s: voltage=%d\n", __func__, fe_sec_voltage);
switch (fe_sec_voltage) {
case SEC_VOLTAGE_13:
voltage = 0;
break;
case SEC_VOLTAGE_18:
voltage = 1;
break;
case SEC_VOLTAGE_OFF:
voltage = 0;
break;
default:
dev_dbg(&priv->i2c->dev, "%s: invalid fe_sec_voltage\n",
__func__);
ret = -EINVAL;
goto error;
}
cmd.args[0] = CMD_LNB_SET_DC_LEVEL;
cmd.args[1] = 0;
cmd.args[2] = voltage;
cmd.len = 3;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_diseqc_send_master_cmd(struct dvb_frontend *fe,
struct dvb_diseqc_master_cmd *diseqc_cmd)
{
struct tda10071_priv *priv = fe->demodulator_priv;
struct tda10071_cmd cmd;
int ret, i;
u8 tmp;
if (!priv->warm) {
ret = -EFAULT;
goto error;
}
dev_dbg(&priv->i2c->dev, "%s: msg_len=%d\n", __func__,
diseqc_cmd->msg_len);
if (diseqc_cmd->msg_len < 3 || diseqc_cmd->msg_len > 6) {
ret = -EINVAL;
goto error;
}
/* wait LNB TX */
for (i = 500, tmp = 0; i && !tmp; i--) {
ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x01);
if (ret)
goto error;
usleep_range(10000, 20000);
}
dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i);
if (i == 0) {
ret = -ETIMEDOUT;
goto error;
}
ret = tda10071_wr_reg_mask(priv, 0x47, 0x00, 0x01);
if (ret)
goto error;
cmd.args[0] = CMD_LNB_SEND_DISEQC;
cmd.args[1] = 0;
cmd.args[2] = 0;
cmd.args[3] = 0;
cmd.args[4] = 2;
cmd.args[5] = 0;
cmd.args[6] = diseqc_cmd->msg_len;
memcpy(&cmd.args[7], diseqc_cmd->msg, diseqc_cmd->msg_len);
cmd.len = 7 + diseqc_cmd->msg_len;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_diseqc_recv_slave_reply(struct dvb_frontend *fe,
struct dvb_diseqc_slave_reply *reply)
{
struct tda10071_priv *priv = fe->demodulator_priv;
struct tda10071_cmd cmd;
int ret, i;
u8 tmp;
if (!priv->warm) {
ret = -EFAULT;
goto error;
}
dev_dbg(&priv->i2c->dev, "%s:\n", __func__);
/* wait LNB RX */
for (i = 500, tmp = 0; i && !tmp; i--) {
ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x02);
if (ret)
goto error;
usleep_range(10000, 20000);
}
dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i);
if (i == 0) {
ret = -ETIMEDOUT;
goto error;
}
/* reply len */
ret = tda10071_rd_reg(priv, 0x46, &tmp);
if (ret)
goto error;
reply->msg_len = tmp & 0x1f; /* [4:0] */
if (reply->msg_len > sizeof(reply->msg))
reply->msg_len = sizeof(reply->msg); /* truncate API max */
/* read reply */
cmd.args[0] = CMD_LNB_UPDATE_REPLY;
cmd.args[1] = 0;
cmd.len = 2;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
ret = tda10071_rd_regs(priv, cmd.len, reply->msg, reply->msg_len);
if (ret)
goto error;
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_diseqc_send_burst(struct dvb_frontend *fe,
fe_sec_mini_cmd_t fe_sec_mini_cmd)
{
struct tda10071_priv *priv = fe->demodulator_priv;
struct tda10071_cmd cmd;
int ret, i;
u8 tmp, burst;
if (!priv->warm) {
ret = -EFAULT;
goto error;
}
dev_dbg(&priv->i2c->dev, "%s: fe_sec_mini_cmd=%d\n", __func__,
fe_sec_mini_cmd);
switch (fe_sec_mini_cmd) {
case SEC_MINI_A:
burst = 0;
break;
case SEC_MINI_B:
burst = 1;
break;
default:
dev_dbg(&priv->i2c->dev, "%s: invalid fe_sec_mini_cmd\n",
__func__);
ret = -EINVAL;
goto error;
}
/* wait LNB TX */
for (i = 500, tmp = 0; i && !tmp; i--) {
ret = tda10071_rd_reg_mask(priv, 0x47, &tmp, 0x01);
if (ret)
goto error;
usleep_range(10000, 20000);
}
dev_dbg(&priv->i2c->dev, "%s: loop=%d\n", __func__, i);
if (i == 0) {
ret = -ETIMEDOUT;
goto error;
}
ret = tda10071_wr_reg_mask(priv, 0x47, 0x00, 0x01);
if (ret)
goto error;
cmd.args[0] = CMD_LNB_SEND_TONEBURST;
cmd.args[1] = 0;
cmd.args[2] = burst;
cmd.len = 3;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct tda10071_priv *priv = fe->demodulator_priv;
int ret;
u8 tmp;
*status = 0;
if (!priv->warm) {
ret = 0;
goto error;
}
ret = tda10071_rd_reg(priv, 0x39, &tmp);
if (ret)
goto error;
/* 0x39[0] tuner PLL */
if (tmp & 0x02) /* demod PLL */
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
if (tmp & 0x04) /* viterbi or LDPC*/
*status |= FE_HAS_VITERBI;
if (tmp & 0x08) /* RS or BCH */
*status |= FE_HAS_SYNC | FE_HAS_LOCK;
priv->fe_status = *status;
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct tda10071_priv *priv = fe->demodulator_priv;
int ret;
u8 buf[2];
if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
*snr = 0;
ret = 0;
goto error;
}
ret = tda10071_rd_regs(priv, 0x3a, buf, 2);
if (ret)
goto error;
/* Es/No dBx10 */
*snr = buf[0] << 8 | buf[1];
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
{
struct tda10071_priv *priv = fe->demodulator_priv;
struct tda10071_cmd cmd;
int ret;
u8 tmp;
if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
*strength = 0;
ret = 0;
goto error;
}
cmd.args[0] = CMD_GET_AGCACC;
cmd.args[1] = 0;
cmd.len = 2;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
/* input power estimate dBm */
ret = tda10071_rd_reg(priv, 0x50, &tmp);
if (ret)
goto error;
if (tmp < 181)
tmp = 181; /* -75 dBm */
else if (tmp > 236)
tmp = 236; /* -20 dBm */
/* scale value to 0x0000-0xffff */
*strength = (tmp-181) * 0xffff / (236-181);
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_read_ber(struct dvb_frontend *fe, u32 *ber)
{
struct tda10071_priv *priv = fe->demodulator_priv;
struct tda10071_cmd cmd;
int ret, i, len;
u8 tmp, reg, buf[8];
if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
*ber = priv->ber = 0;
ret = 0;
goto error;
}
switch (priv->delivery_system) {
case SYS_DVBS:
reg = 0x4c;
len = 8;
i = 1;
break;
case SYS_DVBS2:
reg = 0x4d;
len = 4;
i = 0;
break;
default:
*ber = priv->ber = 0;
return 0;
}
ret = tda10071_rd_reg(priv, reg, &tmp);
if (ret)
goto error;
if (priv->meas_count[i] == tmp) {
dev_dbg(&priv->i2c->dev, "%s: meas not ready=%02x\n", __func__,
tmp);
*ber = priv->ber;
return 0;
} else {
priv->meas_count[i] = tmp;
}
cmd.args[0] = CMD_BER_UPDATE_COUNTERS;
cmd.args[1] = 0;
cmd.args[2] = i;
cmd.len = 3;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
ret = tda10071_rd_regs(priv, cmd.len, buf, len);
if (ret)
goto error;
if (priv->delivery_system == SYS_DVBS) {
*ber = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
priv->ucb += (buf[4] << 8) | buf[5];
} else {
*ber = (buf[0] << 8) | buf[1];
}
priv->ber = *ber;
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
{
struct tda10071_priv *priv = fe->demodulator_priv;
int ret = 0;
if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
*ucblocks = 0;
goto error;
}
/* UCB is updated when BER is read. Assume BER is read anyway. */
*ucblocks = priv->ucb;
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_set_frontend(struct dvb_frontend *fe)
{
struct tda10071_priv *priv = fe->demodulator_priv;
struct tda10071_cmd cmd;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, i;
u8 mode, rolloff, pilot, inversion, div;
fe_modulation_t modulation;
dev_dbg(&priv->i2c->dev,
"%s: delivery_system=%d modulation=%d frequency=%d symbol_rate=%d inversion=%d pilot=%d rolloff=%d\n",
__func__, c->delivery_system, c->modulation,
c->frequency, c->symbol_rate, c->inversion, c->pilot,
c->rolloff);
priv->delivery_system = SYS_UNDEFINED;
if (!priv->warm) {
ret = -EFAULT;
goto error;
}
switch (c->inversion) {
case INVERSION_OFF:
inversion = 1;
break;
case INVERSION_ON:
inversion = 0;
break;
case INVERSION_AUTO:
/* 2 = auto; try first on then off
* 3 = auto; try first off then on */
inversion = 3;
break;
default:
dev_dbg(&priv->i2c->dev, "%s: invalid inversion\n", __func__);
ret = -EINVAL;
goto error;
}
switch (c->delivery_system) {
case SYS_DVBS:
modulation = QPSK;
rolloff = 0;
pilot = 2;
break;
case SYS_DVBS2:
modulation = c->modulation;
switch (c->rolloff) {
case ROLLOFF_20:
rolloff = 2;
break;
case ROLLOFF_25:
rolloff = 1;
break;
case ROLLOFF_35:
rolloff = 0;
break;
case ROLLOFF_AUTO:
default:
dev_dbg(&priv->i2c->dev, "%s: invalid rolloff\n",
__func__);
ret = -EINVAL;
goto error;
}
switch (c->pilot) {
case PILOT_OFF:
pilot = 0;
break;
case PILOT_ON:
pilot = 1;
break;
case PILOT_AUTO:
pilot = 2;
break;
default:
dev_dbg(&priv->i2c->dev, "%s: invalid pilot\n",
__func__);
ret = -EINVAL;
goto error;
}
break;
default:
dev_dbg(&priv->i2c->dev, "%s: invalid delivery_system\n",
__func__);
ret = -EINVAL;
goto error;
}
for (i = 0, mode = 0xff; i < ARRAY_SIZE(TDA10071_MODCOD); i++) {
if (c->delivery_system == TDA10071_MODCOD[i].delivery_system &&
modulation == TDA10071_MODCOD[i].modulation &&
c->fec_inner == TDA10071_MODCOD[i].fec) {
mode = TDA10071_MODCOD[i].val;
dev_dbg(&priv->i2c->dev, "%s: mode found=%02x\n",
__func__, mode);
break;
}
}
if (mode == 0xff) {
dev_dbg(&priv->i2c->dev, "%s: invalid parameter combination\n",
__func__);
ret = -EINVAL;
goto error;
}
if (c->symbol_rate <= 5000000)
div = 14;
else
div = 4;
ret = tda10071_wr_reg(priv, 0x81, div);
if (ret)
goto error;
ret = tda10071_wr_reg(priv, 0xe3, div);
if (ret)
goto error;
cmd.args[0] = CMD_CHANGE_CHANNEL;
cmd.args[1] = 0;
cmd.args[2] = mode;
cmd.args[3] = (c->frequency >> 16) & 0xff;
cmd.args[4] = (c->frequency >> 8) & 0xff;
cmd.args[5] = (c->frequency >> 0) & 0xff;
cmd.args[6] = ((c->symbol_rate / 1000) >> 8) & 0xff;
cmd.args[7] = ((c->symbol_rate / 1000) >> 0) & 0xff;
cmd.args[8] = (tda10071_ops.info.frequency_tolerance >> 8) & 0xff;
cmd.args[9] = (tda10071_ops.info.frequency_tolerance >> 0) & 0xff;
cmd.args[10] = rolloff;
cmd.args[11] = inversion;
cmd.args[12] = pilot;
cmd.args[13] = 0x00;
cmd.args[14] = 0x00;
cmd.len = 15;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
priv->delivery_system = c->delivery_system;
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_get_frontend(struct dvb_frontend *fe)
{
struct tda10071_priv *priv = fe->demodulator_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, i;
u8 buf[5], tmp;
if (!priv->warm || !(priv->fe_status & FE_HAS_LOCK)) {
ret = -EFAULT;
goto error;
}
ret = tda10071_rd_regs(priv, 0x30, buf, 5);
if (ret)
goto error;
tmp = buf[0] & 0x3f;
for (i = 0; i < ARRAY_SIZE(TDA10071_MODCOD); i++) {
if (tmp == TDA10071_MODCOD[i].val) {
c->modulation = TDA10071_MODCOD[i].modulation;
c->fec_inner = TDA10071_MODCOD[i].fec;
c->delivery_system = TDA10071_MODCOD[i].delivery_system;
}
}
switch ((buf[1] >> 0) & 0x01) {
case 0:
c->inversion = INVERSION_ON;
break;
case 1:
c->inversion = INVERSION_OFF;
break;
}
switch ((buf[1] >> 7) & 0x01) {
case 0:
c->pilot = PILOT_OFF;
break;
case 1:
c->pilot = PILOT_ON;
break;
}
c->frequency = (buf[2] << 16) | (buf[3] << 8) | (buf[4] << 0);
ret = tda10071_rd_regs(priv, 0x52, buf, 3);
if (ret)
goto error;
c->symbol_rate = ((buf[0] << 16) | (buf[1] << 8) | (buf[2] << 0)) * 1000;
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_init(struct dvb_frontend *fe)
{
struct tda10071_priv *priv = fe->demodulator_priv;
struct tda10071_cmd cmd;
int ret, i, len, remaining, fw_size;
const struct firmware *fw;
u8 *fw_file = TDA10071_FIRMWARE;
u8 tmp, buf[4];
struct tda10071_reg_val_mask tab[] = {
{ 0xcd, 0x00, 0x07 },
{ 0x80, 0x00, 0x02 },
{ 0xcd, 0x00, 0xc0 },
{ 0xce, 0x00, 0x1b },
{ 0x9d, 0x00, 0x01 },
{ 0x9d, 0x00, 0x02 },
{ 0x9e, 0x00, 0x01 },
{ 0x87, 0x00, 0x80 },
{ 0xce, 0x00, 0x08 },
{ 0xce, 0x00, 0x10 },
};
struct tda10071_reg_val_mask tab2[] = {
{ 0xf1, 0x70, 0xff },
{ 0x88, priv->cfg.pll_multiplier, 0x3f },
{ 0x89, 0x00, 0x10 },
{ 0x89, 0x10, 0x10 },
{ 0xc0, 0x01, 0x01 },
{ 0xc0, 0x00, 0x01 },
{ 0xe0, 0xff, 0xff },
{ 0xe0, 0x00, 0xff },
{ 0x96, 0x1e, 0x7e },
{ 0x8b, 0x08, 0x08 },
{ 0x8b, 0x00, 0x08 },
{ 0x8f, 0x1a, 0x7e },
{ 0x8c, 0x68, 0xff },
{ 0x8d, 0x08, 0xff },
{ 0x8e, 0x4c, 0xff },
{ 0x8f, 0x01, 0x01 },
{ 0x8b, 0x04, 0x04 },
{ 0x8b, 0x00, 0x04 },
{ 0x87, 0x05, 0x07 },
{ 0x80, 0x00, 0x20 },
{ 0xc8, 0x01, 0xff },
{ 0xb4, 0x47, 0xff },
{ 0xb5, 0x9c, 0xff },
{ 0xb6, 0x7d, 0xff },
{ 0xba, 0x00, 0x03 },
{ 0xb7, 0x47, 0xff },
{ 0xb8, 0x9c, 0xff },
{ 0xb9, 0x7d, 0xff },
{ 0xba, 0x00, 0x0c },
{ 0xc8, 0x00, 0xff },
{ 0xcd, 0x00, 0x04 },
{ 0xcd, 0x00, 0x20 },
{ 0xe8, 0x02, 0xff },
{ 0xcf, 0x20, 0xff },
{ 0x9b, 0xd7, 0xff },
{ 0x9a, 0x01, 0x03 },
{ 0xa8, 0x05, 0x0f },
{ 0xa8, 0x65, 0xf0 },
{ 0xa6, 0xa0, 0xf0 },
{ 0x9d, 0x50, 0xfc },
{ 0x9e, 0x20, 0xe0 },
{ 0xa3, 0x1c, 0x7c },
{ 0xd5, 0x03, 0x03 },
};
if (priv->warm) {
/* warm state - wake up device from sleep */
for (i = 0; i < ARRAY_SIZE(tab); i++) {
ret = tda10071_wr_reg_mask(priv, tab[i].reg,
tab[i].val, tab[i].mask);
if (ret)
goto error;
}
cmd.args[0] = CMD_SET_SLEEP_MODE;
cmd.args[1] = 0;
cmd.args[2] = 0;
cmd.len = 3;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
} else {
/* cold state - try to download firmware */
/* request the firmware, this will block and timeout */
ret = request_firmware(&fw, fw_file, priv->i2c->dev.parent);
if (ret) {
dev_err(&priv->i2c->dev,
"%s: did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)\n",
KBUILD_MODNAME, fw_file, ret);
goto error;
}
/* init */
for (i = 0; i < ARRAY_SIZE(tab2); i++) {
ret = tda10071_wr_reg_mask(priv, tab2[i].reg,
tab2[i].val, tab2[i].mask);
if (ret)
goto error_release_firmware;
}
/* download firmware */
ret = tda10071_wr_reg(priv, 0xe0, 0x7f);
if (ret)
goto error_release_firmware;
ret = tda10071_wr_reg(priv, 0xf7, 0x81);
if (ret)
goto error_release_firmware;
ret = tda10071_wr_reg(priv, 0xf8, 0x00);
if (ret)
goto error_release_firmware;
ret = tda10071_wr_reg(priv, 0xf9, 0x00);
if (ret)
goto error_release_firmware;
dev_info(&priv->i2c->dev,
"%s: found a '%s' in cold state, will try to load a firmware\n",
KBUILD_MODNAME, tda10071_ops.info.name);
dev_info(&priv->i2c->dev,
"%s: downloading firmware from file '%s'\n",
KBUILD_MODNAME, fw_file);
/* do not download last byte */
fw_size = fw->size - 1;
for (remaining = fw_size; remaining > 0;
remaining -= (priv->cfg.i2c_wr_max - 1)) {
len = remaining;
if (len > (priv->cfg.i2c_wr_max - 1))
len = (priv->cfg.i2c_wr_max - 1);
ret = tda10071_wr_regs(priv, 0xfa,
(u8 *) &fw->data[fw_size - remaining], len);
if (ret) {
dev_err(&priv->i2c->dev,
"%s: firmware download failed=%d\n",
KBUILD_MODNAME, ret);
goto error_release_firmware;
}
}
release_firmware(fw);
ret = tda10071_wr_reg(priv, 0xf7, 0x0c);
if (ret)
goto error;
ret = tda10071_wr_reg(priv, 0xe0, 0x00);
if (ret)
goto error;
/* wait firmware start */
msleep(250);
/* firmware status */
ret = tda10071_rd_reg(priv, 0x51, &tmp);
if (ret)
goto error;
if (tmp) {
dev_info(&priv->i2c->dev, "%s: firmware did not run\n",
KBUILD_MODNAME);
ret = -EFAULT;
goto error;
} else {
priv->warm = 1;
}
cmd.args[0] = CMD_GET_FW_VERSION;
cmd.len = 1;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
ret = tda10071_rd_regs(priv, cmd.len, buf, 4);
if (ret)
goto error;
dev_info(&priv->i2c->dev, "%s: firmware version %d.%d.%d.%d\n",
KBUILD_MODNAME, buf[0], buf[1], buf[2], buf[3]);
dev_info(&priv->i2c->dev, "%s: found a '%s' in warm state\n",
KBUILD_MODNAME, tda10071_ops.info.name);
ret = tda10071_rd_regs(priv, 0x81, buf, 2);
if (ret)
goto error;
cmd.args[0] = CMD_DEMOD_INIT;
cmd.args[1] = ((priv->cfg.xtal / 1000) >> 8) & 0xff;
cmd.args[2] = ((priv->cfg.xtal / 1000) >> 0) & 0xff;
cmd.args[3] = buf[0];
cmd.args[4] = buf[1];
cmd.args[5] = priv->cfg.pll_multiplier;
cmd.args[6] = priv->cfg.spec_inv;
cmd.args[7] = 0x00;
cmd.len = 8;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
if (priv->cfg.tuner_i2c_addr)
tmp = priv->cfg.tuner_i2c_addr;
else
tmp = 0x14;
cmd.args[0] = CMD_TUNER_INIT;
cmd.args[1] = 0x00;
cmd.args[2] = 0x00;
cmd.args[3] = 0x00;
cmd.args[4] = 0x00;
cmd.args[5] = tmp;
cmd.args[6] = 0x00;
cmd.args[7] = 0x03;
cmd.args[8] = 0x02;
cmd.args[9] = 0x02;
cmd.args[10] = 0x00;
cmd.args[11] = 0x00;
cmd.args[12] = 0x00;
cmd.args[13] = 0x00;
cmd.args[14] = 0x00;
cmd.len = 15;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
cmd.args[0] = CMD_MPEG_CONFIG;
cmd.args[1] = 0;
cmd.args[2] = priv->cfg.ts_mode;
cmd.args[3] = 0x00;
cmd.args[4] = 0x04;
cmd.args[5] = 0x00;
cmd.len = 6;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
ret = tda10071_wr_reg_mask(priv, 0xf0, 0x01, 0x01);
if (ret)
goto error;
cmd.args[0] = CMD_LNB_CONFIG;
cmd.args[1] = 0;
cmd.args[2] = 150;
cmd.args[3] = 3;
cmd.args[4] = 22;
cmd.args[5] = 1;
cmd.args[6] = 1;
cmd.args[7] = 30;
cmd.args[8] = 30;
cmd.args[9] = 30;
cmd.args[10] = 30;
cmd.len = 11;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
cmd.args[0] = CMD_BER_CONTROL;
cmd.args[1] = 0;
cmd.args[2] = 14;
cmd.args[3] = 14;
cmd.len = 4;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
}
return ret;
error_release_firmware:
release_firmware(fw);
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_sleep(struct dvb_frontend *fe)
{
struct tda10071_priv *priv = fe->demodulator_priv;
struct tda10071_cmd cmd;
int ret, i;
struct tda10071_reg_val_mask tab[] = {
{ 0xcd, 0x07, 0x07 },
{ 0x80, 0x02, 0x02 },
{ 0xcd, 0xc0, 0xc0 },
{ 0xce, 0x1b, 0x1b },
{ 0x9d, 0x01, 0x01 },
{ 0x9d, 0x02, 0x02 },
{ 0x9e, 0x01, 0x01 },
{ 0x87, 0x80, 0x80 },
{ 0xce, 0x08, 0x08 },
{ 0xce, 0x10, 0x10 },
};
if (!priv->warm) {
ret = -EFAULT;
goto error;
}
cmd.args[0] = CMD_SET_SLEEP_MODE;
cmd.args[1] = 0;
cmd.args[2] = 1;
cmd.len = 3;
ret = tda10071_cmd_execute(priv, &cmd);
if (ret)
goto error;
for (i = 0; i < ARRAY_SIZE(tab); i++) {
ret = tda10071_wr_reg_mask(priv, tab[i].reg, tab[i].val,
tab[i].mask);
if (ret)
goto error;
}
return ret;
error:
dev_dbg(&priv->i2c->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static int tda10071_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings *s)
{
s->min_delay_ms = 8000;
s->step_size = 0;
s->max_drift = 0;
return 0;
}
static void tda10071_release(struct dvb_frontend *fe)
{
struct tda10071_priv *priv = fe->demodulator_priv;
kfree(priv);
}
struct dvb_frontend *tda10071_attach(const struct tda10071_config *config,
struct i2c_adapter *i2c)
{
int ret;
struct tda10071_priv *priv = NULL;
u8 tmp;
/* allocate memory for the internal priv */
priv = kzalloc(sizeof(struct tda10071_priv), GFP_KERNEL);
if (priv == NULL) {
ret = -ENOMEM;
goto error;
}
/* make sure demod i2c address is specified */
if (!config->demod_i2c_addr) {
dev_dbg(&i2c->dev, "%s: invalid demod i2c address\n", __func__);
ret = -EINVAL;
goto error;
}
/* make sure tuner i2c address is specified */
if (!config->tuner_i2c_addr) {
dev_dbg(&i2c->dev, "%s: invalid tuner i2c address\n", __func__);
ret = -EINVAL;
goto error;
}
/* setup the priv */
priv->i2c = i2c;
memcpy(&priv->cfg, config, sizeof(struct tda10071_config));
/* chip ID */
ret = tda10071_rd_reg(priv, 0xff, &tmp);
if (ret || tmp != 0x0f)
goto error;
/* chip type */
ret = tda10071_rd_reg(priv, 0xdd, &tmp);
if (ret || tmp != 0x00)
goto error;
/* chip version */
ret = tda10071_rd_reg(priv, 0xfe, &tmp);
if (ret || tmp != 0x01)
goto error;
/* create dvb_frontend */
memcpy(&priv->fe.ops, &tda10071_ops, sizeof(struct dvb_frontend_ops));
priv->fe.demodulator_priv = priv;
return &priv->fe;
error:
dev_dbg(&i2c->dev, "%s: failed=%d\n", __func__, ret);
kfree(priv);
return NULL;
}
EXPORT_SYMBOL(tda10071_attach);
static struct dvb_frontend_ops tda10071_ops = {
.delsys = { SYS_DVBS, SYS_DVBS2 },
.info = {
.name = "NXP TDA10071",
.frequency_min = 950000,
.frequency_max = 2150000,
.frequency_tolerance = 5000,
.symbol_rate_min = 1000000,
.symbol_rate_max = 45000000,
.caps = FE_CAN_INVERSION_AUTO |
FE_CAN_FEC_1_2 |
FE_CAN_FEC_2_3 |
FE_CAN_FEC_3_4 |
FE_CAN_FEC_4_5 |
FE_CAN_FEC_5_6 |
FE_CAN_FEC_6_7 |
FE_CAN_FEC_7_8 |
FE_CAN_FEC_8_9 |
FE_CAN_FEC_AUTO |
FE_CAN_QPSK |
FE_CAN_RECOVER |
FE_CAN_2G_MODULATION
},
.release = tda10071_release,
.get_tune_settings = tda10071_get_tune_settings,
.init = tda10071_init,
.sleep = tda10071_sleep,
.set_frontend = tda10071_set_frontend,
.get_frontend = tda10071_get_frontend,
.read_status = tda10071_read_status,
.read_snr = tda10071_read_snr,
.read_signal_strength = tda10071_read_signal_strength,
.read_ber = tda10071_read_ber,
.read_ucblocks = tda10071_read_ucblocks,
.diseqc_send_master_cmd = tda10071_diseqc_send_master_cmd,
.diseqc_recv_slave_reply = tda10071_diseqc_recv_slave_reply,
.diseqc_send_burst = tda10071_diseqc_send_burst,
.set_tone = tda10071_set_tone,
.set_voltage = tda10071_set_voltage,
};
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_DESCRIPTION("NXP TDA10071 DVB-S/S2 demodulator driver");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(TDA10071_FIRMWARE);